LV1_20.book Seite 1 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
20/2
Glossary
20/6
Training
20/7
Ordering notes
20/10
Further documentation
20/11
Standards and approvals
20/29
Quality management
20/30
Siemens contacts
20/31
Online services
20/32
Customer support
20/33
Software licenses
20/34
Subject index
20/41
Order number index
including export markings
20/71
Conditions of sale and delivery,
export regulations
Siemens LV 1 · 2008
LV1_20.book Seite 2 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Glossary
■ Requirements to be met by circuit breakers/motor starter protectors for motor protection
NSK-5962
• Insensitivity to inrush current:
- Response values of the short-circuit trip units up to 13 x In or
- Inrush current bridging through tripping delay (approx. 10 ms
to 20 ms)
• Temperature compensation
• Phase failure sensitivity
• Adjustable trip class for adapting to the motor start-up
characteristic
• Thermal image memory
(several start-up attempts raise the temperature of the motor)
• Overload trip unit according to IEC 60947-4-1:
- Must not trip at 1.05 times load within two hours
- Must trip at 1.2 times load within two hours (at 1.15 times
load for 2-phase load).
Circuit breakers / motor starter protectors for motor protection
Switching
• Operational currents of motors
• Short-circuit currents which arise in this load feeder
If circuit breakers with adjustable time lag class are used, they
can be adapted to practically any motor starting current.
■ Circuit breakers/motor starter protectors for starter combinations
NSK-5963
These circuit breakers/motor starter protectors are designed
only for short-circuit protection of the downstream devices and
loads; they have no overload trip units. The short-circuit trip unit
is adjustable.
In this case the overload protection must be realized elsewhere.
This can be a simple bimetal relay or a user-friendly electronic
motor controller (SIMOCODE) between the load contactor and
the load. As the result it is very easy in the event of a fault to distinguish between the overload relay (feedback of the bimetal relay) or the short-circuit trip unit (feedback of the circuit breaker/
motor starter protector).
If a motor starter protector/circuit breaker with overload protection is selected, then a clear-cut assignment of the device feedback is not possible without additional steps.
The correct assignment of contactors, overload relay and circuit
breaker can be found in the publication "Load Feeders in Fuseless Designs", Order No. E20001-A580-P302-V2-7600 or in the
corresponding tables in the Technical Information LV 1 T.
20
NSK-5964
■ Non-automatic air circuit breakers
20/2
Siemens LV 1 · 2008
This form of circuit breaker is used wherever different load circuits have to be disconnected from or connected to each other.
They are not equipped with overload trip units. The short-circuit
trip unit is not adjustable.
LV1_20.book Seite 3 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Glossary
■ Current-limiting circuit breakers
This symbol indicates the flow of the short-circuit current downstream from the circuit breaker. Because the let-through current
of the circuit breaker is smaller than the maximum value of the
short-circuit current (dotted line), the term "current-limiting circuit
breaker" is used.
N S E 0
0 1 2 7 0
The load on the downstream devices, cables and conductors is
greatly reduced as the result (in this connection see the current
limiting characteristics).
■ Requirements to be met by circuit breakers for system protection
NSE0_00695
• Compliance with the standards IEC 60947-1 and IEC 60947-2:
- Must not trip at 1.05 times load within two hours
- Must trip at 1.3 times load within two hours
• Usual setting ranges:
- Adjustability of the overload trip unit is usually not required
- Response values of the short-circuit trip units 1.25 to 10 x In
• Analysis of selectivity required
Circuit breakers for system protection with permanently set
values
They have a permanently set overload trip unit and a permanently set short-circuit trip unit.
Current limiting.
Example:
Outgoing feeder to sub-distribution boards/distribution boards.
■ Circuit breakers for system protection
with some permanently set values
They have a permanently set overload trip unit and an adjustable
short-circuit trip unit.
Current limiting.
NSE0_00015
Example:
Outgoing feeder to sub-distribution boards/distribution boards
with special requirements to be met by the short-circuit trip unit.
■ Circuit breakers for system protection
with adjustable values
They have an adjustable overload trip unit and an adjustable
short-circuit trip unit.
Current limiting.
Example:
For direct protection of non-motor loads.
20
NSE0_00704
Siemens LV 1 · 2008
20/3
LV1_20.book Seite 4 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Glossary
■ Circuit breakers for system protection
with adjustable values and a short-delayed trip unit
This means that:
• L: Inverse-time delayed overload trip unit or
thermal overload trip unit.
- If the actual current exceeds the value of the set operational
current (Ir), then the circuit breaker will trip within a certain
time.
- The time of the tripping depends on the level of current.
- The higher the level of current, the shorter the time up to
tripping.
• S: Short-time delayed short-circuit trip unit.
- The level of the short-circuit current (Isd) is variably adjustable.
- The trip system (electromagnetic or solid-state) is excited by
the short-circuit current which flows through the circuit
breaker.
- Tripping is delayed for the set time (tsd).
- Time-selective coordination of circuit breakers is thus possible.
• I: Instantaneous short-circuit trip units.
- The trip system (electromagnetic or solid-state) is excited by
the short-circuit current which flows through the circuit
breaker.
- Tripping is instantaneous.
L
S
I
NSE0_00008
It makes sense for the value for the I trip unit (Ii) to be greater
than the value for the S trip unit. If the time (tsd) is selected as
zero for the S trip unit, then the S trip unit responds like the I trip
unit, i.e. tripping is likewise instantaneous.
Example: Fully selective circuit breaker in power distributions.
■ Circuit breakers/motor starter protectors for motor protection
with permanently set time lag class
They have an adjustable overload trip unit, a permanently set
short-circuit trip unit and a permanently set time lag class.
Current limiting.
Example:
For protecting motors with this start-up class.
20
NSE0_01243
20/4
Siemens LV 1 · 2008
LV1_20.book Seite 5 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Glossary
■ Circuit breakers/motor starter protectors for motor protection
with adjustable time lag class
They have an adjustable overload trip unit, a permanently set
short-circuit trip unit and an adjustable time lag class.
Current limiting.
With phase failure sensitivity.
NSE0_00706
Example:
Protection of motors with different start-up classes (one standard
circuit breaker/motor starter protector for all motors).
■ Circuit breakers/motor startet protectors for starter combinations
They have an adjustable short-circuit trip unit but no overload
trip unit.
Current limiting.
NSE0_00707
Example:
Wherever a bimetal relay is connected downstream and a separate signal for short-circuit (from the starter circuit breaker) and
overload (from the bimetal relay) is required.
■ Non-automatic air circuit breakers, current-limiting
MCCB:
They have a permanently set short-circuit trip unit but no overload trip unit (VL160X to VL1600).
Let-through current is limited.
NSE0_00708
Example:
For disconnecting different load circuits.
■ Non-automatic air circuit breakers
ACB:
They have neither an overcurrent trip unit nor a short-circuit trip
unit (3W.).
Not current-limiting:
Example:
For disconnecting different load circuits.
20
N S E 0 _ 0 0 0 1 7
Siemens LV 1 · 2008
20/5
LV1_20.book Seite 6 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Training
■ Faster and more applicable know-how:
Hands-on training from the manufacturer
SITRAIN® – the Siemens Training for Automation and Industrial
Solutions – provides you with comprehensive support in solving
your tasks.
Training by the market leader in automation and plant engineering enables you to make independent decisions with confidence. Especially where the optimum and efficient use of products and plants are concerned. You can eliminate deficiencies in
existing plants, and exclude expensive faulty planning right from
the beginning.
■ SITRAIN highlights
Top trainers
Our trainers are skilled teachers with direct practical experience.
Course developers have close contact with product development, and directly pass on their knowledge to the trainers.
Practical experience
The practical experience of our trainers enables them to teach
theory effectively. But since theory can be pretty drab, we attach
great importance to practical exercises which can comprise up
to half of of the course time. You can therefore immediately implement your new knowledge in practice. We train you on stateof-the-art methodically/didactically designed training equipment. This training approach will give you all the confidence you
need.
Wide variety
With a total of about 300 local attendance courses, we train the
complete range of A&D products as well as interaction of the
products in systems. Telecourses, teach-yourself software and
seminars with a presenter on the Web supplement our classic
range of courses.
Tailor-made training
We are only a short distance away. You can find us at more than
50 locations in Germany, and in 62 countries worldwide. You
wish to have individual training instead of one of our
300 courses? Our solution: We will provide a program tailored
exactly to your personal requirements. Training can be carried
out in our Training Centers or at your company.
First-class know-how directly pays for itself: In shorter startup times, high-quality end products, faster troubleshooting
and reduced downtimes. In other words, increased profits
and lower costs.
Achieve more with SITRAIN
• Shorter times for startup, maintenance and servicing
• Optimized production operations
• Reliable configuration and startup
• Minimization of plant downtimes
• Flexible plant adaptation to market requirements
• Compliance with quality standards in production
• Increased employee satisfaction and motivation
• Shorter familiarization times following changes in technology
and staff
■ Contact
Visit our site on the Internet at:
www.siemens.com/sitrain
or let us advise you personally. You can request our latest training catalog from:
SITRAIN Customer Support Germany:
Phone:+49 (0)1805 / 23 56 11
(0.14 €/min from the German landline network)
+49 (0)1805 / 23 56 12
20
Fax:
20/6
Siemens LV 1 · 2008
The right mixture: Blended learning
"Blended learning" means a combination of various training media and sequences. For example, a local attendance course in
a Training Center can be optimally supplemented by a teachyourself program as preparation or follow-up. Additional effect:
Reduced traveling costs and periods of absence.
LV1_20.book Seite 7 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Ordering notes
■ Logistics
General
Packaging, packing units
With regard to delivery service, communications and environmental protection, our logistics service ensures "quality from the
moment of ordering right through to delivery". By designing our
infrastructure according to customer requirements and implementing electronic order processing, we have successfully optimized our logistics processes.
The packaging in which our equipment is dispatched provides
protection against dust and mechanical damage during transport, thus ensuring that you receive our products in a perfect
state.
To achieve this, we supply } the preferred types marked
with ex warehouse.
We regard the DIN ISO 9001 certification and consistent quality
checks as an integral part of our services.
Electronic order processing is fast, cost-efficient and error-free.
Please contact us if you want to benefit from these advantages.
With our multi-unit packaging and reusable packaging, we offer
you specific types of packaging that are both kind to the environment and tailored to your requirements:
Your advantages at a glance:
• Lower order costs.
• Cost savings through uniform-type packaging: low/no disposal
costs.
• Reduced time and cost thanks to short unpacking times.
• "Just-in-time" delivery directly to the production line helps reduce stock: cost savings through reduction of storage area.
cost savings through reduction of storage area.
• Fast assembly thanks to supply in sets.
• Standard Euro boxes - corresponding to the Euro pallet modular system - suitable for most conveyor systems.
• Active contribution to environmental protection.
Unless stated otherwise in the "Selection and ordering data" of
this catalog, our products are supplied individually packed.
For small parts/accessories, we offer you economical packaging units as standard packs containing more than one
item, e.g. 5, 10, 50 or 100 units. It is essential that whole number multiples of these quantities be ordered to ensure satisfactory quality of the products and problem-free order
processing.
The products are delivered in a neutral carton. The label includes warning notices, the CE mark, the open arrow recycling
symbol, and product description information in English and
German. In addition to the Order No. (MLFB) and the number of
items in the packaging, the Instr. Order No. is also specified for
the operating instructions. It can be obtained from your local
Siemens representative (you will find a list of your local Siemens
representatives at http://www.siemens.com/lowvoltage/
support).
The device Order No. of most devices can also be acquired
through the EAN barcode to simplify ordering and storage logistics. The Order Nos. are assigned electronically to the EAN code
in the master data of low-voltage controls.
20
We are proud of our personal consulting service, on-time deliveries and 1-day transport within Germany.
We select our packaging for maximum environmental compatibility and reusability (e.g. crumpled paper instead of polystyrene
chips for protection during transport in packages up to 32 kg)
and, in particular, with a view to reducing waste.
Siemens LV 1 · 2008
20/7
LV1_20.book Seite 8 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Ordering notes
Multi-unit and reusable packagings
Multi-unit packaging
The devices listed in the table on Page 20/9 can be ordered in
multi-unit or reusable packagings (further versions on request).
If ordering multi-unit or reusable packagings for the first time,
please first consult your local Siemens representative with regard to packaging type, quantity, delivery time and the precise
order designation. For transport reasons, the use of reusable
packaging is recommended only for EU countries.
For both pack types, the quantity of devices ordered (per Order
No.) must be divisible by the packaging quantity. If this is not the
case, the electronic order processing system rounds up to the
next integer multiple of packagings.
Products in a quantity sufficient to fill a multi-unit packaging: 1/2 (W96)
and 1/4 (W97) ENK
As standard, multi-unit packs contain uniform-type, unpacked
individual products (1 device type) in an appropriately sized carton made of recyclable cardboard. The products of the SIRIUS
range can be ordered in units of 1/1, 1/2, 1/4 and 1/8 standard
Euro boxes (ENK).
When ordering products in multi-unit packagings, the Order No.
of the product concerned must be supplemented with "–Z" and,
in addition, the order code X90, or for products from the SIRIUS
range, the order code W9..
Example:
3RT10 24–1AB00–Z W96
+ quantity: 48
Reusable packaging (uniform type)
Standard reusable packagings contain uniform-type, nonpacked individual products (1 device type) in a reusable standard Euro box (ENK) made of durable molded plastic with foam
inserts for protection during transport.
The standard Euro box (ENK) also serves as transport packaging. The reusable packagings (ENK) plus foam inserts are returned by the customer (free of charge) to the supply base.
For products packed in reusable packaging, the Order No. must
be supplemented with "–Z" and the order code X95.
20
Example:
3RT10 24–1AB00–Z X95
+ quantity: 96
20/8
Siemens LV 1 · 2008
LV1_20.book Seite 9 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Ordering notes
Set deliveries (reusable, different devices)
Packaging dimensions
On request, we also deliver order-related packs of larger quantities of different unpacked devices in standard Euro boxes.
Packaging
Please contact your Siemens representative (you will find
Siemens representatives at http://www.siemens.com/
automation/partner) to clarify the delivery details or conditions
for set supply or delivery in reusable packagings. Suitable arrangements will then be agreed with you.
Length
Height
Width
mm
mm
mm
ENK
598
220
396
W95
W96
W97
W98
576
380
290
290
192
187
187
98
380
290
190
190
Multi-unit and reusable packaging, quantity in units, supplied in indivisible packaging quantities
Reusable
Multi-unit
X95 (1/1 ENK)
W95 (1/1 ENK)
144
96
52
66
30
27
24
144
96
52
66
30
27
24
90
48
24
35
15
15
15
42
24
12
17
–
–
–
20
12
6
10
–
–
–
600
600
280
140
70
144
144
90
42
20
96
61
24
96
61
24
48
29
12
24
14
–
12
–
–
128
88
36
128
88
36
64
45
18
32
22
–
16
14
–
52
52
52
52
26
26
12
12
6
6
Solid-state timing relays:
3RP15 05–...30, 3RP15 60–.S.30
3RP15 1/2/4/5.–.A.30
3RP15 2/4.–.B.30
3RP15 3.–.A.30
3RP15 74 –.N.30
137
192
137
137
192
137
192
137
137
192
67
96
67
67
96
27
48
27
27
48
16
24
16
16
24
Devices
Reusable
Multi-unit
X95
X90
–
–
–
–
–
50
20
150
100
50
Contactors, sizes S00 ... S2
3RT10 1.–.A/B..1/2
3RT10 2.–.A..0
3RT10 2.–.A.. 4
3RT10 2.–.B..0
3RT10 3.–.A..0/4
3RT10 3.–.B..0
3RT10 3.–.B..4
Snap-on auxiliary switch blocks
Size S00:
3RH19 11–1F./GA/HA..
Contactor relays, size S00
3RH11 ..–.A/B..0
Motor starter protectors, sizes
S00 ... S2:
3RV10 11–....0
3RV10 21–....0
3RV10 31–....0
Thermally delayed overload relays
Sizes S00 ... S2:
3RU11 16–..B0
3RU11 26–..B0
3RU11 36–..B0
Fuseless load feeders up to 12 A,
size S00:
3RA11 10–..A..–1AP0
3RA11 10–..A..–1BB4
3SB pushbutton units and indicator lights
Complete units and actuators (except EMERGENCY-STOP
and key-operated switches)
Complete units and actuators (EMERGENCY-STOP and keyoperated switches)
Contact blocks
Holders
Supports, blanking plugs
Safety relays
3TK28, 3TK29
23
■ Orders for special versions
For ordering products that differ from the versions listed in the catalog, the order number specified in the catalog must be supplemented with "–Z"; the required features must be specified by
means of the alphanumeric order codes or in plain text.
W96 (1/2 ENK)
W97 (1/4 ENK)
W98 (1/8 ENK)
–
■ Small orders
When small orders are placed, the costs associated with order
processing are greater than the order value. We recommend
therefore that you combine several small orders. Where this is
not possible, we unfortunately have to charge a processing supplement of € 20.-- to cover our costs for order processing and invoicing for all orders with a net goods value of less than € 250.--.
Siemens LV 1 · 2008
20/9
20
Devices
LV1_20.book Seite 10 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Further documentation
■ Overview
You will find all the latest information material, such as brochures, catalogs, manuals and operating instructions on lowvoltage controls and distribution on the Internet at:
http://www.siemens.com/lowvoltage/info
Here you can order your copy of the available documentation or
download it in common file formats (PDF, ZIP).
We regard product support as just as important as the products
and systems themselves. Visit our Support site on the Internet for
a comprehensive range of material on SIRIUS, SENTRON and
SIVACON, such as
• Catalogs available to order free of charge
• Operating instructions and manuals for direct download
• Online registration for seminars and events
• Up-to-date answers to your queries and problems
• Software upgrades and updates for fast download
• Telephone assistance in more than 190 countries
• Photos and graphics for external use
and much, much more - all conveniently and easily accessible.
For your inventory control and planning systems we can provide
commercial, technical and graphic data in electronic form for the
range of low-voltage control products:
Master Data of Low-Voltage Controls V2.0
Edition 2008
The CD-ROM contains commercial master data for low-voltage
control products for further processing in inventory control and
planning systems in the formats DATANORM, ELDANORM, CSV,
ASCII, DBASE, XML and MS ACCESS97.
We also provide further support for SIRIUS - SENTRON - SIVACON
Order No.: E86060-D1003-A301-A6
Token fee 5.-- €
Technical Product Data for CAx Applications
Edition 04/2007
The DVD provides technical and graphic data for the range of
low-voltage control products for further processing in CAE/CAD
systems. The technical data are available in ASCII, in the format
of ECAD Component Standard V1.2, and in other system-specific formats. Graphic data are provided in DXF and DWG format.
Order No.: E86060-D1000-A207-A5-6300
Token fee 48.-- €
Technical Product-Data Collection
Edition 04/2007
Brochures, catalogs and CDs offer fast and more in-depth information
For the low-voltage control products the two DVDs contain 2D dimensional drawings in DXF format, 3D models in STEP format
and product data sheets as PDF files in 4 languages (German,
English, French, Spanish). Texts for tenders are available in
GAEB and Text format.
Order No.: E86060-D1004-A101-A3-7400
20
Token fee 10.-- €
20/10
Siemens LV 1 · 2008
LV1_20.book Seite 11 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
■ Overview
Approvals, test certificates, characteristic curves
Safety characteristics
An overview of the certificates available for low-voltage control
products along with more technical documentation can be consulted daily on the Internet at:
In the following standards, the so-called B10 values for calculating the safety integrity or safety integrity level (SIL) in functional
safety at a high or continuous demand rate are required also for
electromechanical switchgear:
• IEC 62061 "Safety of machines - Functional safety of safety-related electrical, electronic and programmable electronic control systems",
• ISO 13849-1:2006 "Safety of machines - Safety-related components of controls - Part 1: General principles".
http://www.siemens.com/lowvoltage/support
Failure rates of electromechanical components are required for
calculating the safety integrity or safety integrity level (SIL) in
functional safety at a low rate of demand. Further requirements
are laid down in IEC 61511-1 "Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements".
The German versions of the above standards are:
• EN 62061 (VDE 0113-50), October 2005, which since
31.12.2005 has been harmonized as EN 62061 under the
Machine Directive,
• EN ISO 13849-1:2006,
• EN 61511-1 (VDE 810-1).
Definitions
Product support: Certificates
λ(t) dt is the probability that a unit which has not failed by a certain time t will fail in the following interval (t; t +dt).
Failure rates have the dimension 1/time unit, e.g. 1/h.
Failure rates for components are often specified in FIT (failures
in time unit): 1 FIT equals 10-9/h.
From the failure rate it is possible to derive a (mathematical) distribution function of the failure probability:
F(t) = 1 - exp(-λt), with λ as constant failure rate
• The mean value of this exponential distribution is also referred
to as:
- Mean Time To Failure (MTTF) in the case of irreparable components; 63.2 % of components fail by the MTTF.
- Mean Operating Time Between Failures (MTBF) in the case
of reparable components.
• MTTF = 1/λ
(MTTF is a statistical mean value but no guarantee for
endurance)
Electromechanical components are often irreparable components. In general, the failure rate of monitored units changes with
age.
The B10 value for devices subject to wear is expressed in number of operating cycles:
• it is the number of operating cycles after which 10 % of the test
specimens fail in the course of an endurance test (or: the number of operating cycles after which 10 % of the devices have
failed).
For low demand rates (mainly in the process industry), the failure
rate and not the B10 value is used to determine the failure
probability.
20
Product support: Characteristic curves
Siemens LV 1 · 2008
20/11
LV1_20.book Seite 12 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Standard B10 values at a high demand rate
Standard failure rates (at a low demand rate)
With the help of the B10 value and a simplified formula (see section 6.7.8.2.1 of EN 62061), the user can then calculate the total
failure rate of an electromechanical component:
On the basis of the failure rates it is possible to calculate the average probability of failure on demand (PFDavg) of a PLT protective device.
λ = 0.1 x C / B10
A so-called low demand rate is assumed, meaning the rate of
demand on the safety-related system amounts to no more than
once a year and is not greater than double the frequency of the
repeat test.
with C = operating cycles per hour. C is specified by the user.
The failure rate is made up of safe (λS) and dangerous (λD)
failures:
λ = λS+ λD
A repeat test once a year is recommended for electromechanical components in order to reveal passive faults.
For special applications it is possible, in agreement with the inspecting institution (e.g. a technical inspectorate, government
agency or the like) to extend the test intervals by using suitable
solutions (e.g. a mutli-channel version etc.).
or
λD = [share of dangerous failures in %] x λ
λS = [share of safe failures in %] x λ
The failure rate of the dangerous failures λD of the components
used is needed for further calculations.
Listed in the following table are the standard B10 values and the
share of dangerous failures for SIRIUS product groups at a high
demand rate.
Under the above conditions and in compliance with the requirements laid down in IEC 61511 it is possible to achieve SIL 2 with
a single-channel design and SIL 3 with a two-channel design.
Listed in the following table are the standard failure rates and the
share of dangerous failures for SIRIUS product groups at a low
demand rate.
Standard B10 values (at a high demand rate)
Standard failure rates at a low demand rate
SIRIUS product group
(electromechanical components)
Standard
B10 value
(operating
cycles)
Share of dangerous failures
(electromechanical components)
EMERGENCY-STOP control devices
(with positive-opening contacts)
- rotate-to-unlatch
- pull-to-unlatch
Cable-operated switches for
EMERGENCY-STOP function
(with positive-opening contacts)
SIRIUS product group
100 0001)
30 0001)
20 %
20 %
1 000 0001)
20 %
Standard
failure rates
(in FIT)1)
Share of dangerous
failures2)
EMERGENCY-STOP control devices
(with positive-opening contacts)
1003)
20 %
Cable-operated switches for
EMERGENCY-STOP function
(with positive-opening contacts)
1003)
20 %
Standard position switches
(with positive-opening contacts)
100
20 %
10 000 0002)
20 %
Position switches with separate actuator
(with positive-opening contacts)
100
20 %
Position switches with separate actuator
(with positive-opening contacts)
1 000 0001)
20 %
Position switches with tumbler
(with positive-opening contacts)
100
20 %
Position switches with tumbler
(with positive-opening contacts)
1 000 0001)
20 %
Hinge switches
(with positive-opening contacts)
100
20 %
Hinge switches
(with positive-opening contacts)
1 000 0001)
20 %
Pushbuttons (non-latching)
(with positive-opening contacts)
100
20 %
Pushbuttons (non-latching)
(with positive-opening contacts)
10 000 0002)
20 %
Contactors / motor starters
(with positive-opening contacts or
mirror contacts)
100
< 40 %4)
Standard position switches
(with positive-opening contacts)
Contactors / motor starters
(with positive-opening contacts or
mirror contacts)
1 000 0002)
75 %3)
1)
The failure rates specified in the table were limited to 100 FIT.
2)
Valid only under the previously mentioned conditions.
1)
Limited primarily by mechanical wear.
3)
2)
Limited likewise to 100 FIT due to overruling protection with latching.
Limited primarily by contact wear.
4)
3)
Through fault detection using positive-opening auxiliary switches
it is possible to improve the SIL level.
Through fault detection using positive-opening auxiliary switches it is possible to improve the SIL level.
The B10d value used in EN ISO 13849-1:2006 is determined as
follows:
B10d =
B10
Share of dangerous failures
Calculation example
A protective door is monitored by a position switch with a separate actuator.
The protective door is opened 4 times an hour.
The overall failure rate of the position switch is:
λ = 0.1 · C / B10 [failures / h]
λ = 0.1 · 4 / 1 000 000 = 4 · 10-7 [failures / h]
The dangerous failure rate is calculated with:
20
λD = 20 % of λ = 0.2 · 4 · 10-7 [failures / h]
λD = 8 · 10-8 [failures / h]
20/12
Siemens LV 1 · 2008
LV1_20.book Seite 13 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Standards
IEC
EN
DIN VDE
Title
60947-1
60947-2
60947-3
60947-1
60947-2
60947-3
----
Low-voltage controlgear and switchgear: General requirements
• Motor starter protectors
• Load-break switches, disconnectors, switch disconnectors and fuse-combination units
60947-4-1
60947-4-2
60947-4-3
60947-4-1
60947-4-2
60947-4-3
----
• Contactors and motor starters: Electromechanical contactors and motor starters
• Contactors and motor starters: Semiconductor motor controllers and starters, soft starters
• AC semiconductor controllers and contactors for loads other than motors
60947-5-1
60947-5-2
60947-5-3
60947-5-5
60947-5-6
60947-5-1
60947-5-2
60947-5-3
60947-5-5
60947-5-6
------
•
•
•
•
•
60947-5-7
60947-5-8
60947-5-9
60947-5-7
60947-5-8
60947-5-9
----
Control devices and switching elements: Electromechanical control devices
Control devices and switching elements: Proximity switches
Proximity switches (specific behavior under fault conditions)
EMERGENCY-STOP devices with mechanical latching
Control devices and switching elements - DC interface for proximity switches and switching amplifier
(NAMUR)
• Requirements for proximity switches with analog output
• Approval switches
• Flow sensors
60947-6-1
60947-6-2
60947-6-1
60947-6-2
---
• Multifunctional controlgear and switchgear: Transfer switches
• Multifunctional controlgear and switchgear: Control and protection switchgear (CPS)
60947-7-1
60947-7-2
60947-7-3
60947-7-1
60947-7-2
60947-7-3
----
• Ancillary equipment: Terminal blocks for copper conductors
• Ancillary equipment: PE conductor terminal blocks for copper conductors
• Ancillary equipment: Safety requirements for terminal blocks
60947-8
60947-8
--
• Tripping units for the integrated thermal Protection (PTC) of rotating electric machines
62026-2
50295
--
• Actuator-Sensor Interface (AS-i)
60269-1
60269-4
60269-1
60269-4
---
Low-voltage fuses: General requirements
Low-voltage fuses: Supplementary requirements for fuse links for protecting semiconductor components
60050-441
--
--
International dictionary / switchgear and / or switching devices and fuses
60439-1
--
60439-1
50274
---
61140
61140
--
Low-voltage switchgear and controlgear combinations: Type-tested and partially type-tested assemblies
Low-voltage switchgear and controlgear combinations: - Protection from electric shock - Protection from
accidental touching of dangerous active parts
Protection from electric shock - General requirements for apparatus and equipment
60664-1
60664-1
--
Insulation coordination for electrical equipment in low-voltage systems;
Principles, requirements and tests
60204-1
-60079-14
60204-1
50178
60079-14
----
60079-2
60079-2
--
Electrical equipment of machines: General requirements
Equipment of electrical power installations with electronic equipment
Electrical apparatus for potentially explosive gas atmospheres
Installing electrical apparatus in potentially explosive gas atmospheres (except mining)
Electrical equipment for potentially explosive gas atmospheres - Part 2 Pressurized enclosures "p"
61810-1
61810-1
--
61812-1
61812-1
--
60999-1
60999-1
--
61558-1
61558-1
--
Safety of transformers, power supply units and similar:
61558-2-1
61558-2-2
61558-2-1
61558-2-2
---
61558-2-4
61558-2-6
61558-2-20
61558-2-4
61558-2-6
61558-2-20
----
Particular requirements for mains transformers for general use
Safety of transformers, power supply units and similar - Part 2-2:
Particular requirements for control transformers
Particular requirements for isolating transformers for general use
Particular requirements for safety transformers for general use
Particular requirements for small reactors
60076-11
--
60076-11
--
-0552
Power transformers - Part 11: Dry transformers
Standards for variable-ratio transformers with moving contacts perpendicular to the coiling direction
61000-4-1
61000-4-1
--
61000-6-3
61000-6-3
--
61000-6-4
61000-6-4
--
Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques;
Main Section 1: Overview of measuring techniques for interference immunity; Basic EMC standard
Electromagnetic compatibility (EMC); Basic specification for emitted interference
in residential and commercial environments as well as in light industry
Electromagnetic compatibility (EMC); Basic specification for emitted interference in industrial
environments
60044-1
60044-1
--
Instrument transformers: Current transformers
JIS
Title
UL
CSA C22.2 ASME
Electromechanical elementary relays (electromechanical switching relays without a fixed time response);
General and safety-related requirements
Relays with a fixed time response (timing relays) for industrial applications Part 1: Requirements and tests
Connecting materials - Safety requirements for screw terminals and screwless clamping points for electrical copper conductors - Part 1: General requirements and special requirements for terminals for conductors from 0.2 mm2 to 35 mm2
506
508
489
1012
Specialty transformers
Industrial control equipment
Molded case circuit breakers, molded case switches, and circuit breaker enclosures
Power units other than CLASS 2
1561
1604
Dry-type general purpose and power transformers
Electrical equipment for potentially explosive (classified) atmospheres of classes I and II, category 2, and
class III
Terminal blocks
Wire connectors
1059
486A-486B
486E
Internal wiring points for aluminum and / or copper conductors
Specialty transformers
Industrial control equipment
Molded case circuit breakers, molded case switches, and circuit breaker enclosures
General use power supplies
A17.5 / B 44.1
Elevator and escalator electrical equipment
20
No. 66
No. 14
No. 5
No. 107
C 8201-4-1 Low-voltage switchgear and controlgear; Contactors and motor-starters
Siemens LV 1 · 2008
20/13
LV1_20.book Seite 14 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
■ Approval requirements valid in different countries
Siemens low-voltage switchgear and controlgear are designed,
manufactured and tested according to the relevant German
standards (DIN and VDE), IEC publications and European standards (EN) as well as CSA and UL standards. The standards assigned to the single devices are stated in the relevant parts of
this catalog.
As far as is economically viable, the requirements of the various
regulations valid in other countries are also taken into account in
the design of the equipment.
In some countries (see table below), an approval is required for
certain low-voltage switchgear and controlgear components.
Depending on the market requirements, these components have
been submitted for approval to the authorized testing institutes.
In some cases, CSA for Canada and UL for the USA only approve special switchgear designs. Such special versions are
listed separately from the standard versions in the individual
parts of this catalog.
For this equipment, partial limitations of the maximum permissible voltages, currents and ratings can be imposed, or special
approval and, in some cases, special identification is required.
For use on board ship, the specifications of the marine classification societies must be observed (see table below). In some
cases, they require type tests of the components to be approved.
The present state of approval is shown in the "Overview of approved equipment" tables on Page 20/18 to Page 20/26.
■ Testing bodies, approval identification and approval requirements
Country
Canada 1)
USA 1)
China
Government-appointed or private, officially
recognized testing bodies
CSA UL
(USA)
UL
CQC
Approval symbol
s
u
Approval requirements
+
Remarks
UL and CSA are authorized to grant approvals according to Canadian CCC
or US regulations. Please note: these approvals are frequently not recognized and additional approval often has to be obtained from the
national testing authority.
c u cU
c UUS
U
c UUS
+
For more information about UL and CSA see Page 20/17.
1)
+
For guide numbers and file numbers for approvals, please visit
http://www.siemens.com/automation/support and select "Product Support".
■ Marine classification societies
Germany
United Kingdom
France
Norway
CIS
Italy
Poland
USA
Name
Germanischer Lloyd
Lloyds
Register of
Shipping
Bureau
Veritas
Det Norske
Veritas
Russian
Maritime
Register of
Shipping
Registro
Italiano
Navale
Polski
Rejestre
Statków
American
Bureau of
Shipping
Codes
GL
LRS
BV
DNV
RMRS
RINA
PRS
ABS
20
Country
20/14
Siemens LV 1 · 2008
LV1_20.book Seite 15 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
■ CE mark of conformity
Manufacturers of products which fall within the subject area to
which EC directives apply must identify their products, instruction manuals or packaging with a CE mark of conformity.
The CE mark of conformity confirms that a product fulfills the appropriate basic requirements of all pertinent directives. The mark
of conformity is a mandatory requirement for putting products
into circulation throughout the EC.
All the products in this catalog are in conformance with the EC
directives and bear the CE mark of conformity.
• Low-voltage directive
• EMC directive
• Machinery directive
• Ex protection directive
The CE mark of conformity: >.
■ ALPHA/LOVAG
The Low-Voltage Controls and Distribution Division of Siemens
AG is a member of the "Gesellschaft zur Prüfung und Zertifizierung von Niederspannungsgeräten e.V. ALPHA" (Society for
Testing and Certification of Low-Voltage Equipment), Frankfurt
am Main.
The responsibility of manufacturers and the high quality of products are promoted by ALPHA by means of supportive procedural guidelines for testing equipment according to the currently
valid standards.
List of LOVAG members
ALPHA
ASEFA
ACAE
SGS CEBEC
Intertek Semko AB
APPLUSS + CTC
VEIKI-VNL
Germany
France
Italy
Belgium
Sweden
Spain
Hungary
Providing specific conditions are fulfilled, ALPHA can also issue
officially recognized product certificates if required. As a member of LOVAG, ALPHA is also working towards obtaining international recognition for declarations of conformity and certificates.
LOVAG (Low-Voltage Agreement Group) is a body comprising
international specialists from certification bodies and industry
who are working together to create a standardized European
certificate.
■ Accident prevention
20
Test certificates and approvals from the BIA (German statutory
industrial accident insurance institution in Bonn) and from SUVA
(Swiss institute for accident prevention) are available for some
devices in safety control systems. For details, see the respective
product descriptions.
Siemens LV 1 · 2008
20/15
LV1_20.book Seite 16 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
■ Ex protection certificates for SIRIUS controls
Motor protection devices that protect a motor installed in a potentially explosive atmosphere against overloading must comply
with certain special requirements. These requirements are laid
down in the following standards:
• EN 60079-0
• EN 60079-1
• EN 60079-7
• EN 60079-14
• EN 60079-17
• EN 60947-1
• EN 60947-4-1
• EN 60947-5-1
• EN 60947-8
Certification
July 1, 2003 saw the dawning of a new era in the field of explosion protection. Since this date, only those devices and protection systems that have been certified for operation in potentially
explosive atmospheres according to directive 94/9/EC can be
brought into circulation within the European Union.
Only those motor protection devices that have been constructed
according to the above-mentioned standards and which have a
conformity declaration from the manufacturer based on a prototype test certificate may be brought into circulation within the
member states of the EC.
The quality management system of the manufacturer is also subjected to certain requirements and a "QM certificate" must be obtained for the manufacturer from a recognized authority.
■ Certificate of the AS-International Association
for AS-Interface products
20
AS-Interface products are tested and certified by the
AS-International Association. The products have been tested in
an accredited test laboratory according to testing guidelines.
20/16
Siemens LV 1 · 2008
Certification of the QM system
A certificate of approval for quality assurance production has
been issued by DEKRA EXAM GmbH1) with the number BVS 05
ATEX ZQS/E111 of DEKRA EXAM GmbH1) according to
Directive 94/9/EC.
This certificate is valid for equipment groups I and II and categories M2 and 2: Safety and control devices for electrical
equipment.
Certificates
For the 3RV, 3RU, 3RB, 3UF, 3RN and 3RW motor protection devices, the corresponding conformity declarations and prototype
test certificates for Category 2G, and to some extent 2D, are
available and can be supplied on request. More details can also
be found in the section "Type overview of approved devices for
potentially explosive areas (ATEX explosion protection)" on
Page 20/27.
Identifying markings
All equipment must be marked according to the ATEX guideline.
The ATEX identification code contains the equipment group, the
approved environment, the number of the certification authority
and other technical data that was determined from the type test.
1)
DEKRA EXAM GmbH
The certification authority of the "DEKRA EXAM GmbH" numbered as
authority number 0158 according to Article 9 of Directive 94/9/EC of the
European Parliament and Council dated March 23, 1994, certifies that
Siemens Amberg and Cham maintains a quality system for production that
satisfies Appendix IV of this Directive.
LV1_20.book Seite 17 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
■ Special specifications for the USA and Canada
In the USA and Canada, for machine tools and processing machines in particular, supply lines are laid using rubber insulated
cable enclosed in heavy-duty steel piping similar to that used for
gas or water pipe systems.
only approved by CSA and UL for "Heavy Duty" or "Standard
Duty" and are identified either with these specifications in addition to the maximum permissible voltage or by using an
abbreviation.
The tubing system must be completely watertight and electrically conductive (especially sleeving and elbows). Since the
tubing system can also be grounded, the cable entries of enclosed units equipped with heavy-gauge or metric threads must
be fitted with metal adapters between these threads and the
tube thread. The necessary adapters are specified for the
switchgear as accessories; they should be ordered separately
unless otherwise specified.
The abbreviations are harmonized with IEC 60947-5-1 Appendix
1 Table A1 and correspond to the stated utilization categories.
For various switching devices detailed in the catalog, a note has
been included to the effect that, above a certain voltage, the
auxiliary switches/auxiliary contacts can only be used if they
have the same polarity. This means that the input terminals can
only be connected to the same pole of the control voltage, e.g.
"600 V AC above 300 V AC same polarity".
Low-voltage switchgear and controlgear for auxiliary circuits
(e.g. contactor relays, commanding and signaling devices and
auxiliary switches/auxiliary contacts in general) are generally
Different features of UL approvals (for USA and Canada)
Recognized Component
Listed Product
UL issues yellow "Guide cards" with a Guide No. and a File No.
UL issues white "Guide cards" with a Guide No. and a File No.
Devices are identified on the rating plate
using the "UL recognition mark":
USA: U, cUUS
Canada: cU, cUUS
Devices are identified using the "UL listing mark" on the rating plate
e.g. USA: u LISTED 165 C
Canada: cu LISTED 165 C
IND. CONT. EQ.
IND. CONT. EQ.
(165 C stands for: Siemens, A&D CD Division, Amberg plant)
Devices are approved as modules for "factory wiring", i.e.:
as devices for installation in control systems, which are selected, installed,
wired and tested entirely by trained personnel in factories, workshops or
elsewhere, according to the operating conditions.
Devices are approved for "field wiring", i.e.:
• As devices for installation in control systems, which are completely wired by
trained personnel in factories, workshops or elsewhere.
• As single devices for sale in retail outlets in the USA/Canada.
If devices are u or cu approved as "listed products", they are also approved as U or cU "recognized components".
For more information about UL and CSA, see Page 20/14.
■ Special specifications for Russia, Australia and China
GOST approval for Russia
A 46
CCC approval
Since August 1, 2003, CCC approval is required for many
products that are marketed in China.
A GOST approval is required for all products that are to be sold
in Russia. The GOST mark has been obligatory on the packaging of all devices since mid-1998.
All devices delivered to any part of the Russian Federation must
have this customs certification.
C-Tick licensing for Australia
20
The C-Tick license is required for marketing Siemens components in Australia. Electronic devices must provide proof of EMC
clearance in Australia, similar to the CE mark of conformity laid
down by the EMC directive applicable in the EC and bear the
"C-Tick" mark. These requirements have been in force since
October 1st, 1999.
Siemens LV 1 · 2008
20/17
LV1_20.book Seite 18 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
■ Type overview of approved devices
Devices
Type
Approvals
Canada
1) 2)
Marine classifications
USA
1)
1)
China
Germany
United
France
Kingdom
Norway
CIS
Italy
Poland
USA
s
u
U
CCC
GL
LRS
BV
DNV
RMRS
RINA
PRS
ABS
+
+
×
+
+/∆
+/∆
+/∆
+/∆
O
+/∆
+/∆
+/∆
ECOFAST motor
3RK1 323
+
starters (available soon)
6EP16 32-1AL01 +
+
x
+
--
--
--
--
--
--
--
--
+
--
--
--
--
--
--
--
--
--
Motor starters
3RK1 322
PROFIBUS DP
ET 200X motor starters
3RK1 300
+
+
×
+
+
+
+
+
--
+
+
+
ET 200S
3RK1 301
+
+
×
+
--
--
--
--
--
--
--
--
ECOFAST
3RK1 303
+
+
x
+
--
--
--
--
--
--
--
--
ET 200pro
3RK1 304
O
+
x
O
--
--
--
--
--
--
--
--
ECOFAST accessories
ET 200X accessories
3RK1 9
+
+
×
+
+/∆
+/∆
+/∆
+/∆
--
+/∆
+/∆
+/∆
3UF5
+
+
×
+
+
+
--
+
--
--
--
--
3UF7
+
+
x
+
O
O
--
O
--
--
--
--
Current transformers
3UF18
+
+
×
--
--
--
--
--
--
--
--
LOGO!
Basic variant
AS-i variant
Expansion module
6ED1 052
6ED1 055
+
+
+
+
×
×
+
+
+
+
+
+
+
+
---
---
+
+
+
+
SIRIUS motor starter
protectors
up to 100 A4) for
Motor protection
3RV10 11
3RV10 21
3RV10 31
3RV10 4.
+
+3)
+3)
+3)
+
+3)
+3)
+3)
+
×
×
×
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-----
Motor protection with
overload relay function
3RV11 21
3RV11 31
3RV11 4.
+
+
+
+
+
+
×
×
×
+
+
+
----
----
----
----
+
+
+
----
+
+
+
----
Starter combinations
3RV13 21
3RV13 31
3RV13 4.
+
+
+
+
+
+
×
×
×
+
+
+
+
+
+
+
+
+
----
+
+
+
+
+
+
+
+
+
+
+
+
----
Fuse monitoring
3RV16 11.1
+
+
x
+
--
--
--
--
+
--
+
--
Transformer protection
3RV14 21
3RV14 31
+4)
+4)
+4)
+4)
×
×
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
---
System protection
according to UL489
Transformer protection
according to UL489
3RV17 21
3RV17 42
3RV18 21
+
+
+
+
+
+
×
×
x
O
O
O
----
----
----
----
----
----
----
----
Auxiliary switch
3RV19 01
+
+
×
+
+
+
+
+
+
+
+
--
Undervoltage trip units /
shunt trip units
3RV19 .2
+
+
×
+
+
+
+
+
+
+
+
--
Door-coupling rotary
operating mechanisms
3RV19 36/46
+
+
x
+
--
--
--
--
--
--
--
--
Busbars
Isolator modules
Scale covers
Molded-plastic enclosures
Solder pin connections
Cast aluminum enclosures for surface mounting
Terminal blocks type E
3RV19 .7
3RV19 .8-1A
3RV19 08
3RV19 13
3RV19 18
3RV19 23
+
+
--+
--
+
+
--x
--
x
x
--+
--
+
+
+
+
+
+
+
+
+
-+
--
+
+
+
-+
--
+
+
+
-+
--
+
+
+
-+
--
+
+
+
-+
--
+
+
+
-+
--
+
+
+
-+
--
-------
3RV19 28-1H
+
+
--
+
+
+
+
+
+
+
+
--
Feeder terminals
Feeder terminals type E
3RV19 15
3RV19 35
+
+
+
+
×
×
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
---
Alarm switches
3RV19 21-1M
+
+
×
+
+
+
+
+
+
+
+
--
SIMOCODE
Accessories 5)
20
+ Standard version approved.
-- Not yet submitted for approval.
O Device submitted for approval, please inquire.
× U approval not required because u approved.
∆ Note remarks on marine products (AS-Interface), see
http://www.siemens.com/automation/support.
20/18
Siemens LV 1 · 2008
1)
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu and cU approvals are available in accordance with US approval.
3)
Approval as "Type E" combination motor controller and as tap conductor
protection device.
4)
Approval for motorized loads only (not for transformers)
5)
For approved rated data, please see chapter 5, "Protection equipment:
Motor starter protectors".
LV1_20.book Seite 19 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Devices
Type
Approvals
Marine classifications
Canada
USA
1)
1)
1) 2)
China
Germany
United
France
Kingdom
Norway
CIS
Italy
Poland
USA
s
u
U
CCC
GL
LRS
BV
DNV
RMRS
RINA
PRS
ABS
3RT10 1.
3RT10 2.
3RT10 3.
3RT10 4.
+
+
+
+
+
+
+
+
×
×
×
×
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-----
3RT10 5.-.A
3RT10 5.-.N
3RT10 5.-.P
3RT10 5.-.Q
+
+
+
+
+
+
+
+
x
x
x
x
+
+
+
+
+
+
+
+
+
+
+
+
-----
+
+
+
+
-----
-----
-----
-----
3RT10 6.-.A
3RT10 6.-.N
3RT10 6.-.P
3RT10 6.-.Q
+
+
+
+
+
+
+
+
x
x
x
x
+
+
+
+
+
+
+
+
+
+
+
+
-----
+
+
+
+
-----
-----
-----
-----
3RT10 7.-.A
3RT10 7.-.N
3RT10 7.-.P
3RT10 7.-.Q
+
+
+
+
+
+
+
+
x
x
x
x
+
+
+
+
+
+
+
+
+
+
+
+
-----
+
+
+
+
-----
-----
-----
-----
3RT12 6.-.A
3RT12 6.-.N
+
+
+
+
×
×
+
+
+
+
+
+
---
+
+
---
---
---
---
3RT12 7.-.A
3RT12 7.-.N
+
+
+
+
x
x
+
+
+
+
+
+
---
+
+
---
---
---
---
3RT14 4.
+
+
×
+
+
+
--
+
--
--
--
--
3RT14 56-.A
3RT14 56-.N
3RT14 56-.P
3RT14 56-.Q
+
+
+
+
+
+
+
+
×
×
x
x
+
+
+
+
+
+
+
+
+
+
+
+
-----
+
+
+
+
-----
-----
-----
-----
3RT14 66-.A
3RT14 66-.N
3RT14 66-.P
3RT14 66-.Q
+
+
+
+
+
+
+
+
x
x
x
x
+
+
+
+
+
+
+
+
+
+
+
+
-----
+
+
+
+
-----
-----
-----
-----
3RT14 76-.A
3RT14 76-.N
3RT14 76-.P
3RT14 76-.Q
+
+
+
+
+
+
+
+
x
x
x
x
+
+
+
+
+
+
+
+
+
+
+
+
-----
+
+
+
+
-----
-----
-----
-----
SIRIUS 3RT
4-pole contactors
3RT13
3RT15
+
+
+
+
×
×
+
+
---
---
---
---
---
---
---
---
SIRIUS 3RT16 capacitor contactors
3RT16
+
+
×
+
--
--
--
--
--
--
--
--
SIRIUS 3RH contactor 3RH11 22-2K
relays (extended operating range)
+
+
×
+
+
+
+
+
+
+
+
--
SIRIUS coupling relays 3RT10
3RH11
+
+
+
+
×
x
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
---
Accessories for 3RT
and 3RH
+
+
+
+
+
+
+
+
+
+
×
×
×
×
×
+
+
+
+
+
+
+
+
+
--
+
+
+
+
--
+
+
+
+
--
+
+
+
+
--
+
+
+
+
--
+
+
+
+
--
+
+
+
+
--
------
SIRIUS 3RT12
vacuum contactors
SIRIUS 3RT14
contactors for
switching resistive
loads
3RH19 11
3RH19 21
3RT19 .6-1....
3RT19 .6-2....
3RT19 46-4GH07
+ Standard version approved.
-- Not yet submitted for approval.
O Device submitted for approval, please inquire.
× U approval not required because u approved.
∆ Note remarks on marine products (AS-Interface),
see http://www.siemens.com/automation/support.
1)
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu and cU approvals are available in accordance with US approval.
20
SIRIUS 3RT10
contactors
Siemens LV 1 · 2008
20/19
LV1_20.book Seite 20 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Devices
Type
Approvals
Canada
1) 2)
Marine classifications
USA
1)
1)
China
Germany
United
France
Kingdom
Norway
CIS
Italy
Poland
USA
s
u
U
CCC
GL
LRS
BV
DNV
RMRS
RINA
PRS
ABS
SIRIUS 3RA13
reversing
contactors
3RA13 1.
+
+
×
+
+
+
+
+
+
+
+
--
SIRIUS 3RA14
wye-delta
combinations
3RA14 1
--
--
×
+
+
+
+
+
+
+
--
--
Accessories for 3RA1 3RA19 13-2B
3RA19 13-3K
3RA19 23-2B
3RA19 23-3B
3RA19 24-..
3RA19 33-2B
3RA19 43-2B
3RA19 .6-4B
+
-+
+
+
+
+
+
+
-+
+
+
+
+
+
×
×
×
×
×
×
×
×
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
---------
3-phase EMC inter- 3RT19 16
ference suppression modules
+
+
–
+
+
+
+
+
+
+
+
–
3TF68/3TF69
contactors
3TF68 ..-0C
3TF68 ..-1D
3TF68 ..-1Q
3TF68 ..-8C
3TF68 ..-8D
3TF68 ..-8Q
3TF69 ..-0C
3TF69 ..-1D
3TF69 ..-1Q
3TF69 ..-8C
3TF69 ..-8D
3TF69 ..-8Q
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
×
×
×
x
x
x
×
×
×
x
x
x
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-------------
-------------
-------------
3TG10 contactors
3TG10 ...-0
+
+
×
+
--
--
--
--
--
--
--
--
3TD reversing contactor assemblies
3TD68
+
+
×
--
--
--
--
--
--
--
--
--
Surge suppressors 3TX7 4, 3TX7 522
+
+
×
--
--
--
--
--
--
--
--
--
3TK1 contactors
3TK1
with 4 NO main contacts
+2)
+
×
+
--
--
--
--
--
--
--
--
3T contactors with 3T... ..-0L
extended operating
range
+
+
×
--
--
--
--
--
--
--
--
--
SIRIUS 3RF2
solid-state switching devices
3RF2
+
+
×
+
--
--
--
--
--
--
--
--
Contactor relays
3RH11⁄12, 3RH14
3TH42, 3TH43
+
+
+
+
×
×
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
3RU11 thermal
overload relays
3RU11 1.
3RU11 2.
3RU11 3.
3RU11 4.
+
+
+
+
+
+
+
+
×
×
×
×
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-----
3RB2 solid-state
overload relays
3RB20, 3RB21
3RB22, 3RB23
+
+
+
+
×
×
O
+
+
+
+
+
---
+
+
---
---
---
---
Accessories
3RU19 .6-3A
3RU19 00-1
3RU19 00-2
3RB29.3-0AA1
+
+
+
+
+
+
+
+
×
×
×
x
+
+
+
O
+
+
+
+
+
+
+
+
+
+
+
--
+
+
+
+
+
+
+
--
+
+
+
--
+
+
+
--
-----
3RA11, 3RA12
SIRIUS
3RA11/3RA12/3RA5 3RA5
load feeders
+3)
--
+3)
--
×
×
+
+
+
O
+
O
+
--
+
+
---
---
+
--
---
3RE encapsulated
starters
--
--
--
--
--
--
--
--
--
--
--
--
3RE
20
+ Standard version approved.
-- Not yet submitted for approval.
O Device submitted for approval, please inquire.
× U approval not required because u approved.
20/20
Siemens LV 1 · 2008
1)
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu and cU approvals are available in accordance with US approval.
3)
Single devices approved for assemblies.
LV1_20.book Seite 21 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Devices
Type
Approvals
Marine classifications
Canada
USA
1)
1)
1) 2)
China
Germany
United
France
Kingdom
Norway
CIS
Italy
Poland
s
u
U
CCC
GL
LRS
BV
DNV
RMRS
RINA
PRS
SIRIUS solid-state soft 3RW30, 3RW31
starters
3RW40 2 ... 3RW40 4
3RW40 5, 3RW40 7
3RW44 2, 3RW44 3
3RW44 4
3RW44 5, 3RW44 6
+
O
+
+
+
O
+
O
+
+
+
O
×
×
×
×
×
×
+
O
+
+
+
O
+
O
+
O
O
O
+
O
+
O
O
O
-------
+
O
+
O
O
O
-------
-------
+
+
-----
SIRIUS timing relays
3RP15
3RP20
+
+2)
+
+
×
–
+
+
+
O
+
O
+
--
+
+
+
--
+
--
+
--
7PV3
7PV4
+2)
+2)
---
+
+
---
---
---
---
---
---
---
---
SIRIUS temperature
monitoring relays
3RS10
3RS11
+
+
+
+
---
+
+
---
---
---
---
---
---
---
SIRIUS thermistor
motor protection
3RN1
+
+
×
+
+
+
+
+
--
--
+
SIRIUS monitoring
relays
3UG3
+2)
+
+
--
--
--
--
--
--
--
--
3UG4
+2)
+
+
O
+
O
--
O
--
--
--
SIRIUS coupling links, 3RS18
3TX7 011)
narrow design
3TX7 002, 3TX7 003
3TX7 004, 3TX7 005
+
+
+
+
+
+
+
+
×
×
×
×
m
m
m
m
-----
-----
-----
-----
-----
-----
-----
SIRIUS plug-in relays, LZX:MT
relay couplers
LZX:PT
LZX:RT
LZX:RY
+2)
+2)
+2)
+2)
-----
+
+
+
+
O
O
O
O
----
----
----
----
----
----
----
SIRIUS power relays
3TG10 ..-0
+
+
×
+
--
--
--
--
--
--
--
Interface converters/
isolation amplifiers
3RS17
+2)
+
--
m
--
--
--
--
--
--
--
Standard position
switches
3SE2 100/120
3SE3 0
+
+
+
+
×
+
+
+
k
k
k
k
k
k
k
k
---
k
k
k
k
3SE2 200/210/230
+
+
+
k
k
k
k
--
k
k
3SE5 232, 3SE5 234,
3SE5 242, 3SE5 250
+
+
×
O
k
k
k
k
--
k
k
3SE5 112, 3SE5 114,
3SE5 115, 3SE5 122
+
+
×
O
--
--
--
--
--
--
--
3SF1 1, 3SF1 2
3SF1 3
+
+
+
+
×
×
O
O
---
---
---
---
---
---
---
3SE2 120-1X.
3SE2 120-6XX
+
+
+
+
×
×
+
+
k
k
k
k
k
k
k
k
---
k
k
k
k
3SE2 240
3SE2 243/257
+
+
+
+
×
×
+
+
k
k
k
k
k
k
k
k
---
k
k
k
k
Safety position
switches
3SE3 160/180
--
+
×
--
--
--
--
--
--
--
--
3SE2 83., 3SE2 84.
3SE2 9
+
+
+
+
x
x
+
+
---
---
---
---
---
---
---
3SE5 0
+
--
×
O
--
--
--
--
--
--
--
3SE5 1, 3SE5 2
3SE5 25, 3SE5 3
+
+
+
+
×
×
O
O
---
---
---
---
---
---
---
3SE5 312, 3SE5 322
+
+
×
O
--
--
--
--
--
--
--
8WD4/8WD5
+
+
×
--
k
k
k
k
--
k
k
Magnetically operated 3SE6
switches
+
+
×
--
--
--
--
--
--
--
--
Cable-operated
switches
3SE7
+
+
×
--
--
--
--
--
--
--
--
Safety combinations
3TK28 21 bis 3TK28 24, +
3TK28 30
3TK28 25, 3TK28 27/28 +
3TK28 34, 3TK28 35
+
+
×
O
--
--
--
--
--
--
--
+
+
×
×
O
O
---
---
---
---
---
---
---
+
+
+
+
+
+
×
×
×
O
O
O
----
----
----
----
----
----
----
3TK28 40 to 3TK28 45
3TK28 50 to 3TK28 57
3RA71
+ Standard version approved.
-- Not yet submitted for approval.
O Device submitted for approval, please inquire.
× U approval not required because u approved.
k Approved for operation in connection with AS-Interface (Actuator Sensor
Interface), also approved by ABS (American Bureau of Shipping).
m For exporting products to the People’s Republic of China, CCC marking is
not necessary.
1)
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu or cU approval.
20
Signaling columns
Siemens LV 1 · 2008
20/21
LV1_20.book Seite 22 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Devices
Type
Approvals
Marine classifications
Canada
USA
China
1)
1)
Germany
United
France
Kingdom
Norway
CIS
Italy
Poland
s
u
U
CCC
GL
LRS
BV
DNV
RMRS
RINA
PRS
+
+
+
+
+
+
+
+
×
×
×
×
+
+
+
+
-----
-----
-----
-----
-----
-----
-----
+
+
+
+
+
+
+
+
×
×
x
×
+
+
+
+
k
k
k
k
k
k
k
k
k
k
--
--
--
--
--
k
k
k
k
-----
k
k
--
k
k
+
--
+
+
k
k
k
k
--
k
k
+
+
+
+
×
×
+
+
-k
-k
-k
-k
---
-k
-k
+
+
+
+
×
×
+
+
k
k
k
k
k
k
k
k
---
k
k
k
k
1) 2)
Pushbutton units and Actuators with holders,
indicator lights, nomi- complete units, lampnal diameter 16 mm
holders, contact blocks
and voltage reducers
3SB20
3SB22
3SB23
3SB24
Pushbutton units and
indicator lights3),
nominal diameter
22 mm, round type
Actuators with holders,
complete units, switching
elements, lampholders
and transformers (screw
and solder pin terminals)
3SB30
3SB32
3SB323
3SB34
(screw terminals)
3SB34
(solder connection)
3SB35/3SB36
3SB38
Pushbutton units and
indicator lights3),
mounting cutout
26 × 26 mm
Actuators with holders,
complete units, switching
elements, lampholders
and transformers (screw
and solder pin terminals)
3SB31
3SB33
+ Standard version approved.
-- Not yet submitted for approval.
O Device submitted for approval, please inquire.
× U approval not required because u approved.
k Approved for operation in connection with AS-Interface (Actuator Sensor
Interface), also approved by ABS (American Bureau of Shipping).
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu and cU approvals are available in accordance with US approval.
3)
A test certificate has been issued for EMERGENCY-STOP command
devices and switching elements with screw or solder pin terminals by the
BIA (German statutory industrial accident insurance institution).
20
1)
20/22
Siemens LV 1 · 2008
LV1_20.book Seite 23 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Devices
Type
Approvals
Marine classifications
Canada
USA
1)
1)
1) 2)
China
Germany
United
France
Kingdom
Norway
CIS
Italy
Poland USA
CCC
SENTRON WL circuit
breakers
up to 6300 A (ACB)
3WL1
3WL5
s
---
u
-+
U
---
+
--
GL
+
--
LRS
+
--
BV
+
--
DNV
+
--
RMRS
+
--
RINA
+
--
PRS
ABS
+ ............ +
--
SENTRON VL circuit
breakers
up to 1600 A (MCCB)
3VL1/2/3/4
3VL5/6/7/8
3VL9
----
----
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ............ +
+ ............ +
+ ............ +
SENTRON VL circuit
breakers up to 1600
A (MCCB)
(UL/CSA version)
3VL1
3VL2/3/4/4X
3VL6/7/8
3VL9
O
+
+
+
O
+
+
+
x
x
x
x
O
O
O
O
-----
-----
-----
-----
-----
-----
-----
3VF molded case
circuit breakers
up to 2500 A
3VF2
--
--
--
+
--
--
--
--
--
--
--
3NP35/3NP40 1
--
--
+4)
O
+
--
--
--
--
--
+
3NP35/3NP40 7
--
--
+4)
O
--
--
--
--
--
--
--
3NP35/3NP4
--
--
--
O
--
--
--
--
--
--
+
3NP50 to 3NP54
3NP5. 6.–.H
3NJ4
----
----
----
O
O
+
----
----
----
----
----
----
+
+
--
Switch disconnectors 3NJ6 1
with fuses up to 630 A
--
--
--
+
+
+
--
+
--
--
--
Switch disconnectors 3KL50, 3KM50
with fuses up to 800 A 3KL52, 3KM52
3KL53, 3KM53
----
----
-+3)
+3)
O
O
O
+
+
--
+
+
--
+
---
----
+
---
----
+
+
+
3KL55, 3KM55
3KL57, 3KM57
---
---
+3)
+3)
O
O
+
+
+
+
---
---
---
---
+
+
Fuse switch
disconnectors
up to 630 A
Fuse switch
disconnectors
up to 1250 A
3KL61
3KL62
---
---
+3)
3)
+
O
O
---
---
---
---
---
---
+
--
SITOR fuses
3NE
3NC
3NC1 09, 3NC1 49
3NC2 29
--+
+
-----
+
+
+
+
O
O
O
O
-----
-----
-----
-----
-----
-----
-----
LV HRC fuse links
500 V AC/440 V DC
3NA3 00., 3NA3 010
3NA3 012
-+
---
---
---
---
---
---
---
+
+
---
3NA3 014, 3NA3 017
3NA3 02., 3NA3 03.
+
+
---
---
---
---
---
---
---
+
+
---
3NA3 10., 3NA3 110
3NA3 114, 3NA3 117
-+
---
---
+
+
-+
---
---
---
-+
---
3NA3 12., 3NA3 13.
3NA3 14.
+
+
---
---
+
+
+
+
---
---
---
+
--
---
3NA3 214
3NA3 220, 3NA3 222
3NA3 224, 3NA3 23.
--+
----
+
+
+
----
----
----
----
--+
----
3NA3 240
3NA3 242, 3NA3 244
+
+
---
---
+
+
-+
---
---
---
+
+
---
3NA3 250
3NA3 252, 3NA3 260
3NA3 254
+
+
+
----
----
+
+
+
-+
--
----
----
----
+
+
+
----
3NA3 340, 3NA3 340
3NA3 35., 3NA3 360
-+
---
---
+
+
---
---
---
---
-+
---
3NA3 362, 3NA3 365
3NA3 372
---
---
---
+
+
---
---
---
---
+
+
---
3NA3 47., 3NA3 480
3NA3 6..
---
---
---
---
---
---
---
---
---
---
3NA3 801, 3NA3 803
3NA3 802, 3NA3 804
3NA3 805, 3NA3 807
----
----
----
+
+
+
+
-+
----
----
----
+
-+
----
3NA3 810
3NA3 812, 3NA3 814
3NA3 817, 3NA3 82.
-+
+
----
----
+
+
+
+
+
+
----
----
----
+
+
+
----
3NA3 830
3NA3 832
3NA3 836
+
+
--
----
----
+
+
+
+
---
----
----
----
+
-+
----
3NA3 1..
3NA3 2..
3NA3 3..
----
----
----
----
----
----
----
----
----
----
3NA3 80., 3NA3 810
3NA3 812, 3NA3 817
---
---
---
---
---
---
---
---
---
---
3NA3 814
3NA3 82., 3NA3 830
---
---
---
---
---
---
---
---
---
---
+ Standard version approved.
-- Not yet submitted for approval.
O Device submitted for approval, please inquire.
× U approval not required because u approved.
1)
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu and cU approvals are available in accordance with US approval.
3)
Fpr approved rated data, see Chapter 17
4)
Approved as fuse base.
20
LV HRC fuse links
690 V AC
Siemens LV 1 · 2008
20/23
LV1_20.book Seite 24 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Devices
Type
Approvals
Canada
1) 2)
s
Switch
disconnectors
cUUS
+3)
+3)
1)
1)
China
Germany
United
France
Kingdom
Norway
CIS
Italy
Poland USA
u
cuUS
U
CCC
GL
LRS
BV
DNV
RMRS
RINA
PRS
ABS
---
---
---
O
O
+
--
+
--
+
--
---
+
--
---
+
+
---
×
×
+3)
+3)
---
×
×
O
O
-+
---
---
---
---
---
+
+
---
3KA50
-3KA51, 3KA55, 3KA58 -3KA53
3KA57
Marine classifications
USA
3KE4
--
--
--
--
--
--
--
--
--
--
+
--
+
Busbar adapter
systems
8US14)
+
+
--
--
+
--
--
--
--
--
--
--
--
--
Transformers
4AM, 4AP, 4AT, 4AU 5)
4BT, 4BU
4AX, 4FK
----
+
+
--
----
----
+
+
--
m
m
m
--7)
--7)
--7)
--7)
--7)
--7)
--7)
--7)
--7)
--7)
--7)
--7)
----
----
+
-+
--7)
--7)
--7)
Power supplies
4AV21, 4AV23
--
+
--
--
+
m
--7)
--7)
--7)
--7)
--
--
+
--7)
7)
7)
--
7)
7)
--
--
+
--7)
4AV20, 4AV22,
4AV24, 4AV26
--
+
--
--
+
m
--
4AV30 ... 4AV35
6EP1
-+6)
+
--
---
---
+
x
m
m
-+6)
-+6)
---
-+6)
---
---
+
--
-+6)
Control switches
and main control
switches
Basic units and
flush-mounting
switches
3LD2
3LD2. 64 ... 3LD2. 66
+
+
×
×
+
+
---
×
--
+
+
+
--
+
--
---
+
--
---
---
+
--
---
Molded-plastic
distribution
systems
8HP
--
--
O
--
--
--
--
--
--
--
--
--
--
--
20
+ Standard version approved.
-- Not yet submitted for approval.
O Device submitted for approval, please inquire.
× U approval not required because u approved.
m For exporting products to the People’s Republic of China, CCC marking is
not necessary.
20/24
Siemens LV 1 · 2008
--
--
1)
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu and cU approvals are available in accordance with US approval,
unless otherwise specified.
3)
For u, cu and s approved rated data see Chapter 16, "Molded-case circuit breakers (MCCB)".
4)
Not all components are approved.
5)
Transformers according to EN 61558-2-15 are not U, cU and cUus
approved.
6)
Partly; for details see Catalog KT 10.1, "SITOP Power Power Supply".
7)
On request, single devices can be certified according to GL, LRS, DNV
and ABS.
LV1_20.book Seite 25 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Type
Approvals
Canada
1) 2)
Terminal blocks
For s and U
approved ratings of
terminals blocks
see Technical
specifications
8WA1 010-1PH01
8WA1 010-1PQ00
Marine classifications
USA
1)
1)
China Czech Slova- Polan HunRepub kia
d
gary
lic
Germany
United Franc Nor- CIS
King- e
way
dom
Italy
Poland USA
s
cUUS u
SKTC SEP
MEEI
GL
LRS
BV
DNV RMRS RINA PRS
ABS
+
+
---
---
---
+
--
---
---
+
--
---
---
---
---
---
+
--
---
cuUS U CCC EZU
8WA1 011-0D
+
--
+
+
+
--
+
+
+
+
+
--
--
+
+
8WA1 011-1BF21
8WA1 011-1BF22
8WA1 011-1BF23
8WA1 011-1BF24
8WA1 011-1BF25
+
+
+
+
+
------
+
+
+
+
+
+
+
+
---
+
+
+
---
------
+
+
+
---
+
+
+
+
--
+
+
+
+
--
+
+
+
+
--
+
+
+
+
--
------
------
+
+
+
---
+
+
+
+
--
8WA1 011-1BG11
8WA1 011-1BG21
8WA1 011-1BG22
8WA1 011-1BG24
+
+
+
+
-----
+
+
+
+
+
+
+
--
+
+
+
--
-----
+
+
+
--
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-----
-----
+
+
+
--
+
+
+
+
8WA1 011-1BH23
8WA1 011-1BH24
8WA1 011-1BK11
8WA1 011-1BM11
8WA1 011-1BP11
+
+
+
+
--
------
+
+
+
+
--
+
-+
+
+
+
-+
+
+
------
+
-+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
------
------
--+
+
+
+
+
+
+
+
8WA1 011-1DF11
8WA1 011-1DG11
8WA1 011-1DH11
8WA1 011-1DQ10
8WA1 011-1DS10
8WA1 011-1DU10
+
+
+
----
-------
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
----
-------
+
+
+
----
+
+
+
----
+
+
+
----
+
+
+
----
+
+
+
----
-------
-------
+
+
+
----
+
+
+
----
8WA1 011-1EF20
8WA1 011-1MH1.
-+3)
---
-+
+
+
-+
---
+
+
-+
-+
-+
-+
---
---
+
+
-+
8WA1 011-1EF28
8WA1 011-1NF01
8WA1 011-1NF02
8WA1 011-1NG31
8WA1 011-1NG32
-+
+
+
+
------
-+
+
+
+
-+
----
-+
----
------
+
+
-+
--
-+
+
+
+
-+
+
+
+
-+
+
+
+
-+
+
+
+
------
------
-+
+
+
+
-+
+
+
+
+ Standard version approved.
-- Not yet submitted for approval.
+
+
+
1)
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu and cU approvals are available in accordance with US approval,
unless otherwise specified.
3)
600 A, 5 A, type D or 300 V type C.
20
Devices
Siemens LV 1 · 2008
20/25
LV1_20.book Seite 26 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Devices
Type
Approvals
Canada USA
Marine classifications
1) 2)
1)
1)
Czech Slova- Poland HunRepub kia
gary
lic
Germany
United France NorKingway
dom
CIS
Italy
Poland USA
s
u
U
EZU
SKTC SEP
MEEI
GL
LRS
BV
DNV
RMRS RINA
PRS
ABS
Terminal blocks
8WA1 011 -1NH01
For s and U approved
-1NH02
ratings of terminals
-1NK02
blocks see Technical
specifications
+
+
--
----
+
+
+
+
---
+
-+
----
+
---
+
+
+
+
+
+
+
+
+
+
+
+
----
----
+
+
+
+
+
+
8WA1 011 -1PF00
-1PF01
-1PF11
+
+
+
----
+
+
+
+
+
+
+
+
+
----
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
----
----
+
+
+
+
+
+
8WA1 011 -1PG00
-1PG01
-1PG11
+
+
+
----
+
+
+
+
+
+
+
+
+
----
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
----
----
+
+
+
+
+
+
8WA1 011 -1PH00
-1PH11
-1PK00
-1PM00
+
+
+
+
-----
+
+
+
+
+
+
---
+
+
+
--
-----
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
-----
-----
+
+
+
+
+
+
+
+
8WA1 011 -1SF12
-1SF2.
+
+
---
+
+
+
--
+
+
---
+
--
+
--
+
--
+
--
+
--
---
---
+
+
+
--
8WA1 011 -2BG11
-2DG11
-2SF2.
+
+
+
----
+
+
+
+
+
--
-+
+
----
-+
--
+
+
--
+
+
--
+
+
--
+
+
--
----
----
+
+
+
+
+
--
8WA1 011 -3D.21
+
--
+
+
+
--
+
+
+
+
+
--
--
+
+
8WA1 011-3JF16 to
8WA1 011-3JF20
+
--
+
+
+
--
+
--
--
--
--
--
--
--
--
8WA1 011 -4SF2.
-6SF2.
-8SF2.
+
---
----
+
---
----
+
+
+
----
----
----
----
----
----
----
----
+
+
+
----
8WA1 011 -6BG11
-6DG11
-6EG..
+
+
--
----
+
+
+
+
+
+
-+
+
----
-+
+
+
+
--
+
+
--
+
+
--
+
+
--
----
----
+
+
+
+
+
--
8WA1 012 -1DK10
-1D.14
-+
---
+
+
---
---
---
---
---
---
---
---
---
---
---
---
8WA1 204 to 206
+
--
+
+
+
--
+
+
+
+
+
--
--
+
+
8WA1 211, 8WA1 221
8WA1 232
---
---
-+
---
+
+
---
---
---
---
---
---
---
---
+
+
---
8WA1 304, 8WA1 305
8WA1 501
8WA1 604
+
+
--
----
+
+
+
+
-+
+
-+
----
+
-+
+
-+
+
-+
+
-+
+
-+
----
----
+
-+
+
-+
20
+ Standard version approved.
-- Not yet submitted for approval.
20/26
Siemens LV 1 · 2008
1)
For guide numbers and file numbers for the approvals, visit our website at
http://www.siemens.com/automation/support.
2)
cu and cU approvals are available in accordance with US approval.
LV1_20.book Seite 27 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
■ Type overview of approved devices for potentially explosive areas (ATEX explosion protection)
Type
Certificate number
Certification
based on
Type of protection/
Identification
ATEX 2705
EN 60947-5-2,
EN 50281-1-1
Ex II (3) D X
DMT 02 ATEX F 001,
DMT 02 ATEX F 001 N1
IEC 60947-4-1,
EN 60079-14
Ex II (2) GD
PTB 06 ATEX 3001
EN 60079-1,
EN 60079-7,
EN 60079-14,
IEC 60947-4-1,
IEC 60947-5-1,
IEC 60947-8
IEC 61508
Ex II (2) GD
DMT 98 ATEX G 001,
DMT 98 ATEX G 001 N1
IEC 60079-14,
EN 60079-14
Ex II (2) GD
Systems
Digital I/O modules
IP67
Series
3RK1 400-1DQ05-0AA3 K60
3RK1 200-0CQ05-0AA3
Contactors1)
Motor starter protectors
For motor protection
Size
3RV10 11
S00
3RV10 21
S0
3RV10 31
S2
3RV10 41
S3
3RV10 42
S3
For standard applications
3RB20, 3RB21
S00 ... S12
For high-feature applications
3RB22, 3RB29
3RB solid-state overload relays
PTB 05 ATEX 3022
3RU1 thermal overload relays
For standard applications
3RU11 1
S00
3RU11 2
S0
3RU11 3
S2
3RU11 4
S3
Starting
Soft starters
For standard applications
Size
3RW40
S6, S10/S12
BVS 05 ATEX F 002
EN 60079-14,
IEC 60947-4-2,
IEC 61508
Ex II (2) GD
3RK13 01
S00
DMT 02 ATEX F 001,
DMT 02 ATEX F 001 N1
IEC 60947-4-1,
EN 60079-14
Ex II (2) GD
BVS 06 ATEX F 001
EN 60079-1,
EN 60079-7,
EN 60079-14,
IEC 60947-4-1,
IEC 60947-5-1,
IEC 60947-8,
IEC 61508
Ex I (M2),
Ex II (2) GD
PTB 01 ATEX 3219
EN 50019,
EN 60079-7,
EN 60079-14,
IEC 60079-7
Ex II (2) G
EN 50281-1-1
Ex II (2) GD
ET200S motor starters
Standard motor starters
Monitoring and control1)
Size
For motors with constant speeds
S00 ... S12
3UF7
SIMOCODE-DP motor protection and control devices
Size
For motors with constant speeds
S00 ... S12
3UF5
3UF5 ...-...0
1)
Information for the implementation of current monitoring motor protection
devices.
Definition of the locked-rotor time tE: If the rotor of an explosion-protected
induction motor of protection type "Increased Safety" EEx e stalls (locks) at
operating temperature during runtime, the motor must be switched off, at the
very latest, when either the rotor or the stator winding have reached their
maximum temperature. The time that elapses until the rotor or stator winding
has reached maximum temperature is called the locked-rotor time tE or tE
time.
The demands made on overload protective devices with regard to tE time:
For trip units and relays with inverse-time delayed operation, tripping characteristics must be available at the operating site. The characteristic curves
should show the tripping time for 3-pole loading, assuming a cold state and
a room temperature of 20 °C, depending on at least a 3- to 8-fold setting current. The protective devices must comply with the specified tripping times
with a permissible deviation of ± 20 %. The trip units and relays for
machines with cage rotors must be selected such that the tripping times for
3-pole loading do not exceed the locked-rotor time tE specified on the type
plate.
For information on the tripping characteristics of our circuit breakers and
overload relays, visit our web site at:
http://www.siemens.com/lowvoltage/manuals
20
SIMOCODE pro motor management and control devices
Siemens LV 1 · 2008
20/27
LV1_20.book Seite 28 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Standards and approvals
Type
Certificate number
Certification
based on
Type of protection/
Identification
PTB 01 ATEX 3218
EN 60079-14,
IEC 60947-8,
IEC 60947-1
IEC 60947-5-1
EN 50281-1-1
Ex II (2) G
EN/IEC 61241-0
EN/IEC 61241-1
Ex II 3D
Simple electrical
apparatus according
to EN 50020,
IEC 60947-5-1
Application only in
circuits of type of
protection i
(intrinsic safety)
according to
EN 50020
Simple electrical
apparatus according
to EN 50020,
IEC 60947-5-1
Application only in
circuits of type of
protection i
(intrinsic safety)
according to
EN 50020
Monitoring and control1) (continued)
Thermistor motor protection relays
For PRC sensors
(PTCs typ A)
Width (mm)
3RN10
22.5; 45
3RN10 11-.B,
3RN10 11-.G,
3RN10 12-.B,
3RN10 12-.G,
3RN10 13-…0
22.5
Ex II (2) GD
Detecting
Position switches and cable-operated switches
Width
3SE5 112-.....-1DA0
56 mm
3SE5 122-.....-1DA0
40 mm
ATEX 2829
Commanding and signaling
Actuators
Version
Actuator
3SB30 ..
3SB35 ..
Plastic or metal ATEX 2690b
actuator
Contact block
3SB34 ..-0.
Spring-loaded
terminals or
screw terminals
Lampholder
3SB34 ..-1A
Spring-loaded ATEX 2689b
terminals or
screw terminals
LED
3SB39 01-1.A
Rated voltage
24 V AC/DC,
BA 9s base
Components for actuators
1)
Information for the implementation of current monitoring motor protection
devices.
Definition of the locked-rotor time tE: If the rotor of an explosion-protected
induction motor of protection type "Increased Safety" EEx e stalls (locks) at
operating temperature during runtime, the motor must be switched off, at the
very latest, when either the rotor or the stator winding have reached their
maximum temperature. The time that elapses until the rotor or stator winding
has reached maximum temperature is called the locked-rotor time tE or tE
time.
The demands made on overload protective devices with regard to tE time:
For trip units and relays with inverse-time delayed operation, tripping characteristics must be available at the operating site. The characteristic curves
should show the tripping time for 3-pole loading, assuming a cold state and
a room temperature of 20 °C, depending on at least a 3- to 8-fold setting current. The protective devices must comply with the specified tripping times
with a permissible deviation of ± 20 %. The trip units and relays for
machines with cage rotors must be selected such that the tripping times for
3-pole loading do not exceed the locked-rotor time tE specified on the type
plate.
For information on the tripping characteristics of our circuit breakers and
overload relays, visit our web site at:
http://www.siemens.com/lowvoltage/manuals
■ More information
For more information about standards and approvals go to
http://www.siemens.com/automation/support and select "Product Support".
20
If you have any questions concerning UL/CSA approvals,
contact Technical Assistance, Tel.: +49 (0) 911 895 59 00.
20/28
Siemens LV 1 · 2008
Application up to
a voltage of 26.4 V
(LEDs)
More information can be found on the Internet at:
http://www.siemens.com/lowvoltage/atex
Test certificates can be found at
http://www.siemens.com/automation/support
LV1_20.book Seite 29 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Quality management
■ Quality management
The quality management system of our A&D division complies
with the international standard EN ISO 9001.
The products and systems described in this catalog are sold under application of a quality management system certified by
DQS and TÜV Management Service GmbH in according to the
ISO 9001. The certificates are recognized in all IQ Net countries.
DQS Registered Certificate Nos.:
Siemens AG
Automation and Drives
• Industrial Automation Systems
Reg. No.: 001323 QM
• Sensors and Communication
Industrial Communication
Reg. No.: 000656 QM.
TÜV (German Technical Inspectorate) Registered
Certificate No.:
■ Certificates
An overview of the certificates available for SIMATIC NET products (CE, UL, CSA, FM, shipping authorizations) can be found
on the Internet at:
http://www.siemens.com/simatic-net
Other certificates for SIMATIC products can be found on the
Internet at:
http://www.siemens.com/simatic
These lists are continuously revised and updated.
Data for products not yet included in the overview are continuously collected and prepared for subsequent editions.
You can find certificates, approvals, verification test certificates
and characteristic curves at:
Support\Certificates
Siemens AG
Automation and Drives
• Low-Voltage Controls
Reg. No.: 12 100 16950 TMS.
BVQI Registered Certificate No.:
Siemens AG
Automation and Drives
• Electrical Installation Technology
Reg. No.: 117779
20
or by going directly to the Link Box:
Siemens LV 1 · 2008
20/29
LV1_20.book Seite 30 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Siemens contacts
■ Siemens contacts worldwide
At
http://www.siemens.com/automation/partner
you can find details of Siemens contact partners worldwide
responsible for particular technologies.
You can obtain in most cases a contact partner for
• Technical Support,
• Spare parts/repairs,
• Service,
• Training,
• Sales or
• Consultation/engineering.
You start by selecting a
• Country,
• Product or
• Sector.
20
By further specifying the remaining criteria you will find exactly
the right contact partner with his/her respective expertise.
20/30
Siemens LV 1 · 2008
LV1_20.book Seite 31 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Online services
■ A&D in the WWW
A detailed knowledge of the range of products and services
available is essential when planning and configuring automation
systems. It goes without saying that this information must always
be fully up-to-date.
The Siemens Automation and Drives Group (A&D) has therefore
built up a comprehensive range of information in the World Wide
Web, which offers quick and easy access to all data required.
Under the address
http://www.siemens.com/automation
you will find everything you need to know about products, systems and services.
■ Product Selection Using the Offline Mall of Automation and Drives
Detailed information together with convenient interactive
functions:
The Offline Mall CA 01 covers more than 80,000 products and
thus provides a full summary of the Siemens Automation and
Drives product base.
Here you will find everything that you need to solve tasks in the
fields of automation, switchgear, installation and drives.
All information is linked into a user interface which is easy to
work with and intuitive.
After selecting the product of your choice you can order at the
press of a button, by fax or by online link.
Information on the Offline Mall CA 01 can be found in the Internet
under
http://www.siemens.com/automation/ca01
or on CD-ROM or DVD.
■ Easy Shopping with the A&D Mall
The A&D Mall is the virtual department store of Siemens AG in
the Internet. Here you have access to a huge range of products
presented in electronic catalogs in an informative and attractive
way.
Data transfer via EDIFACT allows the whole procedure from
selection through ordering to tracking of the order to be carried
out online via the Internet.
Numerous functions are available to support you.
For example, powerful search functions make it easy to find the
required products, which can be immediately checked for availability. Customer-specific discounts and preparation of quotes
can be carried out online as well as order tracking and tracing.
Please visit the A&D Mall on the Internet under:
20
http://www.siemens.com/automation/mall
Siemens LV 1 · 2008
20/31
LV1_20.book Seite 32 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Customer Support
■ Configuration and software engineering
Support in configuring and developing with customer-oriented
services from actual configuration to implementation of the automation project.2)
■ Technical Support
.I
Competent consulting in technical questions covering a wide
range of customer-oriented services for all our products and
systems.
In the face of harsh competition you need optimum conditions to
keep ahead all the time:
A strong starting position. A sophisticated strategy and team for
the necessary support - in every phase.
Service & Support from Siemens provides this support with a
complete range of different services for automation and drives.
In every phase: from planning and startup to maintenance and
upgrading.
Tel.: +49 (0)180 50 50 222
Fax: +49 (0)180 50 50 223
(0.14 €/min from the German
fixed network)
Our specialists know when and where to act to keep the productivity and cost-effectiveness of your system running in top form.
http://www.siemens.com/
automation/support-request
■ Online Support
The comprehensive information
system available round the
clock via Internet ranging from
Product Support and Service &
Support services to Support
Tools in the Shop.
http://www.siemens.com/
automation/service&support
■ Technical Consulting
Support in the planning and designing of your project from detailed actual-state analysis,
target definition and consulting
on product and system questions right to the creation of the
automation solution.2)
■ Service on Site
With Service On Site we offer
services for startup and maintenance, essential for ensuring
system availability.
In Germany
0180 50 50 4442)
(0.14 €/min from the German
fixed network)
■ Repairs and Spare Parts
In the operating phase of a machine or automation system we
provide a comprehensive repair
and spare parts service ensuring the highest degree of operating safety and reliability.
In Germany
0180 50 50 4461)
(0.14 €/min from the German
fixed network)
Technical Assistance
Expert technical assistance1) for
Low-voltage controls and electrical installation.
■ Optimization and Upgrading
To enhance productivity and
save costs in your project we offer high-quality services in optimization and upgrading.2)
Tel.: +49 (9 11) 8 95-59 00
Fax: +49 (9 11) 8 95-59 07
E-Mail: technical-assistance
@siemens.com
20
1)
Contact:
Technical assistance for product selection · Old/new coding ·
Competitor coding · Special versions · Special requirements · Sales
promotion (Infoline).
Your regional contacts for sales support (prices, discounts, delivery times).
Technical Support for commissioning support and after-sales services.
20/32
Siemens LV 1 · 2008
2)
For country-specific telephone numbers go to our Internet site at:
http://www.siemens.com/automation/service&support
LV1_20.book Seite 33 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Software licenses
■ Overview
Software types
Software requiring a license is categorized into types.
The following software types have been defined:
• Engineering software
• Runtime software
Factory license
With the Factory License the user has the right to install and use
the software at one permanent establishment only. The permanent establishment is defined by one address only.The number
of hardware devices on which the software may be installed
results from the order data or the Certificate of License (CoL).
Engineering software
This includes all software products for creating (engineering)
user software, e.g. for configuring, programming, parameterizing, testing, commissioning or servicing.
Data generated with engineering software and executable
programs can be duplicated for your own use or for use by thirdparties free-of-charge.
Certificate of license
The Certificate of License (CoL) is the licensee's proof that the
use of the software has been licensed by Siemens. A CoL is
required for every type of use and must be kept in a safe place.
License types
Siemens Automation & Drives offers various types of software
license:
• Floating license
• Single license
• Rental license
• Trial license
Floating license
The software may be installed for internal use on any number of
devices by the licensee. Only the concurrent user is licensed.
The concurrent user is the person using the program. Use
begins when the software is started.
A license is required for each concurrent user.
Single license
Unlike the floating license, a single license permits only one
installation of the software.
The type of use licensed is specified in the ordering data and
in the Certificate of License (CoL). Types of use include for
example per device, per axis, per channel, etc.
One single license is required for each type of use defined.
Rental license
A rental license supports the "sporadic use" of engineering
software. Once the license key has been installed, the software
can be used for a specific number of hours (the operating hours
do not have to be consecutive).
One license is required for each installation of the software.
Trial license
A trial license supports "short-term use" of the software in a nonproductive context, e.g. for testing and evaluation purposes.
It can be transferred to another license.
Delivery versions
Software is constantly being updated.
The following delivery versions
• PowerPack
• Upgrade
can be used to access updates.
Existing bug fixes are supplied with the ServicePack version.
PowerPack
PowerPacks can be used to upgrade to more powerful software.
The licensee receives a new license agreement and CoL
(Certificate of License) with the PowerPack. This CoL, together
with the CoL for the original product, proves that the new software is licensed.
A separate PowerPack must be purchased for each original
license of the software to be replaced.
Upgrade
An upgrade permits the use of a new version of the software on
the condition that a license for a previous version of the product
is already held.
The licensee receives a new license agreement and CoL with
the upgrade. This CoL, together with the CoL for the previous
product, proves that the new version is licensed.
A separate upgrade must be purchased for each original license
of the software to be upgraded.
ServicePack
ServicePacks are used to debug existing products.
ServicePacks may be duplicated for use as prescribed according to the number of existing original licenses.
License key
Siemens Automation & Drives supplies software products with
and without license keys.
The license key serves as an electronic license stamp and
is also the "switch" for activating the software (floating license,
rental license, etc.).
The complete installation of software products requiring license
keys includes the program to be licensed (the software) and the
license key (which represents the license).
Detailed explanations concerning license conditions can be
found in the “Terms and Conditions of Siemens AG” or under
http://www.siemens.com/automation/mall
(A&D Mall Online-Help System)
A&D/Software licenses/En 03.08.06
20
Runtime software
This includes all software products required for plant/machine
operation, e.g. operating system, basic system, system expansions, drivers, etc.
The duplication of the runtime software and executable programs created with the runtime software for your own use or for
use by third-parties is subject to a charge.
You can find information about license fees according to use in
the ordering data (e.g. in the catalog). Examples of categories of
use include per CPU, per installation, per channel, per instance,
per axis, per control loop, per variable, etc.
Information about extended rights of use for parameterization/configuration tools supplied as integral components of the
scope of delivery can be found in the readme file supplied with
the relevant product(s).
Downgrading
The licensee is permitted to use the software or an earlier version/release of the software, provided that the licensee owns
such a version/release and its use is technically feasible.
Siemens LV 1 · 2008
20/33
LV1_20.book Seite 34 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Subject index
Page
Numerics
3RN1 thermistor motor protection
Explosion protection (ATEX)
for PTC sensors
8HP molded-plastic distribution systems
14/31 ... 14/32
7/5
7/71
... 7/74
3RP15 timing relays
in industrial enclosures
7/31
... 7/36
3RP20 timing relays, 45 mm
7/37
... 7/40
3RS17 interface converters
7/89
... 7/91
3RT19 timing relays
for mounting onto contactors
7/41
... 7/42
3RV1 motor starter protectors
Auxiliary trip units
5/20
Door-coupling
5/25
rotary operating mechansisms
Mountable accessories
5/17 ... 5/20
Remote motorized operating mechanisms 5/25
3RV1 circuit breakers/motor starter
5/2, 5/4 ... 5/32
protectors
5/17 ... 5/32
Accessories
5/2, 5/13, 5/16 ... 5/18
Auxiliary switches
Busbar accessories
5/21 ... 5/23
5/2, 5/21, 5/23, 5/29
Busbar adapters
5/2, 5/21 ... 5/23
Busbar systems
Distance protection
5/2, 5/16
Door-coupling
5/2, 5/24
rotary operating mechanisms
Enclosures
5/2, 5/30 ... 5/32
5/2, 5/31
Enclosures for flush mounting
5/2, 5/31
Enclosures for surface mounting
Explosion protection (ATEX)
5/5
5/2, 5/30 ... 5/32
Front plates
5/2, 5/13
Fuse monitoring
Infeed System
5/2
Insulated three-phase
5/2, 5/21 ... 5/23
busbar systems
5/2, 5/17, 5/19
Isolator modules
Link modules
5/2, 5/28, 5/29
5/2, 5/6 ... 5/9
Motor protection
- with overload relay function
5/2, 5/10
Mountable accessories
5/17 ... 5/20
5/26 ... 5/29
Mounting accessories
Remote motorized
5/2, 5/24
operating mechanisms
Rotary operating mechanisms 5/2, 5/24, 5/25
5/2, 5/17, 5/20
Shunt trip units
Signaling switches
5/2, 5/17, 5/19
5/26, 5/27
Solder pin connections
5/2, 5/11
Starter combinations
System protection
5/2, 5/14
5/26, 5/27
Terminals
5/2, 5/12, 5/15
Transformer protection
Trip units
5/20
5/2, 5/17, 5/20
Undervoltage releases
Voltage transformer circuit breakers 5/2, 5/16
7/75 ... 7/88
3TK28 safety relays
with contactor relay enabling circuits 7/85, 7/86
with electronic enabling circuits 7/76 ... 7/79
with relay enabling circuits
7/80 ... 7/84
7/87, 7/88
with special functions
20
3UF18 current transformers
for overload protection
20/34
Page
Siemens LV 1 · 2008
7/19
14/10
8MC, 8MF cubicle systems
14/9
8PS busbar trunking systems
Adapters
Busbars
for position switches
Standard mounting rails
Additional load modules
8US busbar systems
60 mm
- Connection methods
- Infeed
5/29
6/52
8/42
6/51, 6/52
3/109, 3/122, 3/126
2/61
Addressing units
14/48, 14/49
14/48, 14/49
8US busbar systems
40 mm
- Accessories
- Busbar adapters
- Connection methods
- Device holders
- Infeed
60 mm
- Accessories
- Bar-mounting fuse bases
- Base assemblies
- Busbar adapters
- Device holders
14/33
... 14/56
14/38
...
14/38
...
14/50
14/50
...
...
14/42
14/41
14/37
14/41
14/37
14/56
14/55
14/44
14/54
14/54
A
Accessories and spare parts
for contactors and contactor relays
3/97 ... 3/131
- Additional load modules 3/109, 3/122, 3/126
- Arc chutes
3/118, 3/121, 3/127 ... 3/130
- Auxiliary switch blocks
3/100 ... 3/102,
3/103 ... 3/105, 3/120,
3/121, 3/125,3/127 ... 3/130
- Auxiliary terminals
3/110
- Box terminals
3/112
- Connection modules
3/110
- Contacts
3/127 ... 3/130
- Coupling links
3/110, 3/124
- Covers
3/112, 3/120, 3/130
- EMC interference modules
3/109
- Insulation stop for contactors
3/113
- LED modules
for indicating contactor operation
3/110
- Links for paralleling
3/111, 3/120, 3/123
- Locking devices
3/130
- Magnetic coils
3/114, 3/115,
3/121, 3/127 ... 3/130
- Mechanical latching blocks
3/106
- OFF-delay devices
3/106, 3/121, 3/125
- ON-delay devices
3/124
- Plug-in bases
3/122, 3/126
- Pneumatic delay blocks
3/106
- Screw adapters
3/111
- Solder pin adapters
3/110, 3/111
- Solid-state time-delay blocks
3/106
- Surge suppressors
3/107, 3/108,
3/119, 3/122, 3/124, 3/126
- Withdrawable coils
3/116, 3/117
Acoustic signal transformers
for acoustic signaling devices
Actuators
for position switches
Page
9/77
8/48, 8/49, 8/54, 8/55
Adapter sleeve fitters for NEOZED
19/63
Adapter sleeves for
DIAZED
NEOZED
19/69
19/63
Air circuit breakers/
non-automatic air circuit breakers 15/1
... 15/49
ALPHA 630-DIN floor-mounted
distribution boards
14/13
ALPHA FIX terminal blocks
Accessories
14/28 ...
14/23,
Combination plug-in terminals
Insulation displacement connection
Plug-in connection
14/25,
14/14 ...
Screw connection
14/18 ...
Spring-type connections
14/30
14/24
14/27
14/26
14/17
14/22
19/156
Ammeter selector switches
Analyzers
2/62
... 2/64
... 20/28
Approvals
20/11
Arc chutes for contactors
3/118, 3/121,
3/127 ... 3/130
2/9 ... 2/66
AS-Interface
ASIsafe
2/13 ... 2/17
9/101
Cable-operated switches
2/10
Communication overview
EMERGENCY-STOP
mushroom pushbuttons
9/63, 9/95
Enclosures for pushbutton units
9/94 ... 9/96
and indicator lights
9/63
F adapters
2/18 ... 2/21
Masters
Power supply units
2/58
2/26 ... 2/32
Routers
9/105, 9/108
Signaling columns
2/33 ... 2/57, 9/96
Slaves
Specification
2/11, 2/12
System components and accessories
2/65, 2/66
- Accessories
- Addressing units
2/61
- Analyzers
2/62 ... 2/64
- Extension plugs
2/60
Transmission media
- Shaped cables
2/59
2/9
Transmission technology
ASIsafe
Safety modules
Safety monitors
2/16, 2/17
2/14
ATEX
3RN1 thermistor motor protection
3RV1 motor starter protectors
Overload relays
5/38, 5/47,
SIMOCODE 3UF
motor management and control devices
7/5
5/5
5/52
7/5
10/2, 10/3, 10/5,
Autotransformers
10/47 ... 10/50, 10/61 ... 10/63, 10/84, 10/85
10/3, 10/86, 10/87
for matching purposes
Auxiliary switch blocks
for contactors and contactor relays
- Laterally mountable 3/103, 3/127 ... 3/130
- Snap-on
3/100 ... 3/102, 3/121, 3/125
- Solid-state time-delay
3/104, 3/105, 3/120
LV1_20.book Seite 35 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Subject index
Auxiliary switches
for 3RV1
motor starter protectors 5/2, 5/13, 5/16 ... 5/18
15/22, 15/37, 16/38,
for circuit breakers
16/40 ... 16/42, 16/76
Auxiliary switches for
Cylindrical fuses
LV HRC fuse switch disconnectors
Residual current protective devices
SR60 busbar systems
19/73
19/106
19/46
19/131
3/110
Auxiliary terminals
Auxiliary trip units
5/20
for 3RV1 motro starter protectors
15/22, 15/37, 16/38,
for circuit breakers
16/40 ... 16/41, 16/76
B
Base plates for contactor assemblies 3/37, 3/47
Blanking plugs for
pushbutton units and indicator lights
9/79
5/51
Box terminal blocks for overload relays
Box terminals
3/112
Breaker blocking covers for
miniature circuit breakers
19/36
Busbar accessories
for 3RV1 motor starter protectors
5/21
... 5/23
16/68
Busbar adapter systems
6/52
Busbar adapters
for 3RV1 circuit breakers/motor starter protectors
5/2, 5/21, 5/23, 5/29
Busbar adapters for
main miniature circuit breakers (SHU)
19/36
19/125
Busbar supports
Busbar systems for 3RV1
circuit breakers/motor starter protectors
5/2, 5/21,
5/23
Busbars
19/63
Busbar adapters
for LV HRC fuse switch disconnectors 19/105
Bus-mounting bases
SR60 DIAZED
SR60 NEOZED
19/130
19/129
Bus-mounting disconnectors
SR60 NEOZED
19/131
19/131
Cable-operated switches
Capacitor contactors
Caps for DIAZED
Combination plug-in terminals
... 6/65
Configuring, visualizing and controlling
18/1
with SIMATIC and SENTRON
... 18/7
Connecting cables
5/49
Connection for LOGO!
2/57
Connection modules for contactors
3/58
19/69
2/52, 2/53
6/63
Compact starters 400 V AC
5/50, 5/56
... 9/101
14/23, 14/24
Communication-capable circuit breakers 15/24,
15/40, 16/74
9/16, 9/76
9/3, 9/98
3/37
Coil repeat terminals
Connection methods
for circuit breakers
C
Cable releases for RESET
Circuit breakers
Air
15/1 ... 15/49
Auxiliary switches
15/22,15/3716/38,16/40 ... 16/42, 16/76
Auxiliary trip units
15/22, 15/37,
16/38, 16/40 ... 16/41, 16/76
Communication-capable 15/24, 15/40, 16/74
15/26 ... 15/27,
Connection methods for
15/42 ... 15/43
15/44
Conversion sets
Fixed mounting 15/6 ... 15/9, 15/14 ... 15/17,
15/47, 16/8 ... 16/38, 16/75
16/10 ... 16/11,
Generator protection
16/14 ... 16/15, 16/21, 16/28 ... 16/29, 16/37
Guide frames
15/29 ... 15/30, 15/49
Interlocks
16/62 ... 16/67
16/1 ... 16/76
Molded case
Motor protection
16/10 ... 16/11,
16/14 ... 16/17, 16/21
Operating mechanisms
15/22, 15/24,
15/37, 16/39, 16/43 ... 16/48, 16/76
16/49 ... 16/54
Plug-in versions
16/55
RCD modules
Shunt trip units
15/22, 15/37
Shunt trip units for 16/38, 16/40 ... 16/41,16/76
16/12 ... 16/13
Starter combinations
System protection
16/8 ... 16/11,
16/14 ... 16/17, 16/21 ... 16/34,
16/36 ... 16/37, 16/75
Undervoltage trip units
15/22, 15/37,16/38,
16/40 ... 16/41, 16/76
with electronic trip unit 15/6 ... 15/21, 15/31,
16/8 ... 16/37, 16/75
15/45
Withdrawable bridging units
15/45
Withdrawable grounding units
Withdrawable short-circuits
15/45
15/10 ... 15/13,
Withdrawable versions
15/18 ... 15/21, 15/48,
16/49 ... 16/54
16/12 ... 16/13,
without electronic trip unit
16/28 ... 16/29
Communications modules
Bus-mounting fuse bases
SR60 LV HRC
Buttons
Page
15/26 ... 15/27,
15/42 ... 15/43
for fixed-mounted circuit breakers
16/56 ... 16/61, 16/76
Connectors mechanical
3/110
3/39
Contact blocks
9/29
for joystick switches
for magnetically operated switches
8/86
8/43
for position switches
9/9, 9/10, 9/59 ... 9/62,
for pushbuttons
9/88, 9/89
Page
Contactor assemblies
Contactor assemblies for wye-delta starting
3/40 ... 3/47
- Complete units
3/40 ... 3/46
- Components for customer assembly
3/47
Reversing contactor assemblies
3/32 ... 3/39, 3/48
- Complete units
3/32 ... 3/36, 3/48
- Components for customer assembly 3/37 ... 3/39
Wye-delta starting
3/49
- Complete units
3/49
Contactor assemblies for wye-delta starting
3/40 ... 3/47
3/69 ... 3/78
Contactor relays
Coupling relays for switching auxiliary circuits 3/78
3/72
Latched
3/70
with auxiliary switch block
Contactors
3/50 ...
for special applications
- Capacitor contactors
- for switching DC voltage
3/66 ...
- for switching resistive loads
3/50 ...
- with extended operating range,
for railway applications
3/59 ...
for switching motors 3/5 ... 3/31, 3/61 ...
- Vacuum contactors
3/26 ...
- with auxiliary switch block 3/15 ... 3/21,
- with DC solenoid system
Contacts for contactors
3/127
3/65
3/64
3/28
3/31
3/29
... 3/130
7/1
Control devices
3/68
3/58
3/68
3/54
... 7/91
10/2,10/3,10/5 ... 10/19,
Control transformers
10/24 ... 10/41, 10/4710/48,
10/57 ... 10/59, 10/61, 10/62
Conversion sets
Fixed-mounted circuit breakers
to withdrawable circuit breakers
15/44
Converter transformers 10/49,10/50,10/63, 10/84, 10/85
Converters
4/26
9/27, 9/28
Coordinate switches
2/54
Counter modules
3/110, 3/124
Coupling links
Coupling relays
for switching auxiliary circuits
3/78
3/79 ... 3/81
for switching motors
3/82 ... 3/87
Narrow design
- Relay couplers
3/82, 3/83
- Relay couplers with plug-in connection 3/84, 3/85
- Semiconductor couplers
3/86, 3/87
with industrial housing
- Relay couplers
3/88
Covers 3/112, 3/120, 3/130, 15/25, 15/32, 15/38
for position switches
8/43
5/26, 5/51, 5/56
for terminals
19/130
SR60 DIAZED
SR60 NEOZED
19/130
Covers for
19/69
DIAZED
Residual current protective devices19/27, 19/57
Covers for time counters
19/160
Cubicle air-conditioning
14/12
CubicleBUS modules
15/41
5/49
Current measuring modules
7/49, 7/50
Current monitoring
Current transformers
14/68
Siemens LV 1 · 2008
... 14/70
20/35
20
Page
LV1_20.book Seite 36 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Subject index
Page
D
DC current
Non-automatic air circuit breakers for
15/47 ... 15/49
3/106
Delay blocks, pneumatic
DIAZED
Adapter sleeves
Caps
Gauge screws
SR60 bus-mounting bases
SR60 covers
SR60 gauge rings
19/69
19/69
19/69
19/130
19/130
19/130
Dimensioning with SIMARIS design 18/1
... 18/3
6/2, 6/32 ... 6/39
Direct-on-line starters
Encapsulated
6/131
for busbar systems 6/36 ... 6/39, 6/70 ... 6/71
for snapping onto standard mounting rails
6/32 ... 6/35
or for screw mounting
5/2, 5/16
Distance protection
Door-coupling rotary operating mechanisms
for 3RV1 motor starter protectors
5/25
Door-coupling rotary operating mechanisms
14/57 ... 14/67
for 3RV1 circuit breakers/motor starter
protectors
5/2, 5/24
14/62 ... 14/65
for circuit breakers
for switch disconnectors
14/58 ... 14/61
14/66
Individual parts
Operating mechanisms for fixed mounting
14/67
Page
Page
Enclosures for
Residual current protective devices
19/27, 19/57
Fuseless load feeders
6/2, 6/31 ... 6/57
Assembly kits
6/51
- for reversing duty
6/51
Coil repeat terminals
6/50
Connection modules for contactors
Direct-on-line starters
- for busbar systems
6/36 ... 6/39
- for snapping onto standard mounting rail
or for screw mounting
6/32 ... 6/35
6/54 ... 6/57
Infeed system
6/50
Link modules
Mechanical interlocks
6/51
Reversing starters
6/44 ... 6/47
- for busbar systems
- for snapping onto standard mounting rail
or for screw mounting
6/40 ... 6/44
6/51
Standard mounting rail adapters
Surge suppressors
6/49
6/50
Wiring kits
Enclosures for flush mounting
for 3RV1 circuit breakers/ motor starter
5/2, 5/31
protectors
Enclosures for surface mounting
for 3RV1 motor starter protectors
5/2, 5/31
19/32
End caps for busbars
ET 200S Safety motor starters 6/3, 6/103 ... 6/113
ET 200S Failsafe motor starters 6/104 ... 6/105
Safety modules local
6/106 ... 6/110
6/111 ... 6/113
Safety modules PROFIsafe
ETU electronic trip units
15/6 ... 15/21, 15/31,
16/8 ... 16/37, 16/75
5/48
Evaluation modules
Explosion protection (ATEX)
3RN1 thermistor motor protection
3RV1 motor starter protectors
5/38, 5/47,
Overload relays
SIMOCODE 3UF
motor management and control devices
Extension plugs
7/5
5/5
5/52
7/5
Gauge rings SR60 DIAZED
19/130
2/60
Gauge screws for DIAZED
19/69
Generator protection
F
3/47, 19/38
Feeder terminals
Fixed mounting
Circuit breakers
15/6 ... 15/9,
15/14 ... 15/17, 15/47
16/8
Fixed-mounted circuit breakers
... 16/38,
16/75
E
ECOFAST
2/67
... 2/69
12/4
ECOFAST ES
ECOFAST System
2/67
... 2/69
E-counters
for 3/4 conductor connection 19/153, 19/155
for active and reactive energy 19/153, 19/155
for active energy
19/153, 19/155
Electronic trip units
15/6 ... 15/21, 15/31,
16/8 ... 16/37, 16/75
EMC interference modules for contactors 3/109
EMERGENCY-STOP
door-coupling rotary operating mechanisms
for 3RV1 motor starter protectors
5/25
EMERGENCY-STOP mushroom buttons
for 3RV1 motor starter protectors
EMERGENCY-STOP mushroom pushbuttons
9/5, 9/7, 9/22, 9/35, 9/39,
9/43, 9/46, 9/57, 9/84, 9/85, 9/95
Encapsulated starters
Direct-on-line starters
Reversing starters
6/3, 6/130
Encapsulated transformers 10/2, 10/51
... 6/133
6/131
6/132
... 10/53
20
Enclosures
for 3RV1 motor starter protectors
5/2, 5/30 ... 5/32
for pushbutton units and indicator lights
9/83 ... 9/95
for transformers
10/48, 10/50,
10/62, 10/84, 10/85
20/36
Siemens LV 1 · 2008
... 16/61, 16/76
Connection methods for 16/56
Fixing parts for
Miniature circuit breakers
Residual current protective devices
19/26
19/57
Floor-mounted distribution boards
14/13
Front plates for
3RV1 motor starter protectors
5/2,5/30
... 5/32
4/5, 4/21
Function modules
Converters
Heating current monitoring
Load monitoring
Power control regulators
Power controllers
... 4/30
4/26
4/28
4/27
4/29
4/30
19/63
5/2, 5/13
Fuse monitoring
Fuse switch disconnectors
17/47
... 17/74
17/70, 17/71
1-pole and 3-pole switchable
Assembly kits for distribution systems
17/57 ... 17/59
for extended technical requirements
17/60, 17/61
for extended technical requirements with fuse
monitoring
17/62 ... 17/69
17/48 ... 17/50
for power distribution
for power distribution with fuse monitoring
17/51 ... 17/53
Fused load feeders
16/10 ... 16/11,
16/14 ... 16/15, 16/21,
16/28 ... 16/29, 16/37
2/55
Ground-fault detection modules
Guide frames
for circuit breakers
15/29
... 15/30, 15/49
H
Handle couplers for
Residual current protective devices
19/54
Handle locking devices for
Miniature circuit breakers
19/26
4/28
Heating current monitoring
Hinge switches
8/2, 8/56
... 8/58, 8/75, 8/76
5/48
Function expansion modules
Fuse bases NEOZED
5/32
G
6/2, 6/62
I
I/O modules
2/48 ...
for operation in the control cabinet
2/51
- F90 modules
2/51
- Flat modules
2/51
- SlimLine
2/49, 2/50
2/33 ... 2/47
for operation in the field
- Analog
2/45 ... 2/47
- Digital
2/34 ... 2/44
Incandescent lamps for pushbutton units
and indicator lights
9/16, 9/76
9/2, 9/4, 9/8, 9/25,
9/26, 9/36, 9/39, 9/43, 9/48, 9/58
5/32
for 3RV1 motor starter protectors
Indicator lights
Infeed system
5/2, 6/2, 6/54
Inscription labels
for enclosures
Inscription labels for
Miniature circuit breakers
Residual current protective devices
... 6/57
5/57
9/90, 9/91
19/26
19/57
LV1_20.book Seite 37 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Subject index
Page
Insert labels for pushbutton units and
9/11 ... 9/14, 9/67
indicator lights
... 9/69
Installation kits for contactor assemblies
3/38, 3/47
Insulated three-phase busbar systems for
3RV1 circuit breakers/motor starter protectors
5/2,5/21 ... 5/23
Insulation monitoring
for ungrounded AC networks
for ungrounded DC voltage networks
7/56
7/57
3/113
Insulation stop for contactors
9/3, 9/110
Integrated signal lamps
15/25, 15/33
16/62 ... 16/67
3/37
Interlocks
for circuit breakers
Mechanical
10/2, 10/3, 10/5,
Isolating transformers
10/24 ... 10/48, 10/57 ... 10/62
10/2, 10/54
for supply of medical premises
10/2, 10/53
Resin-enclosed
5/2, 5/17, 5/19
Isolator modules
Locking devices for
Residual current protective devices
19/47
Locking devices for contactors
3/130
Locks for rotary buttons and switches
9/6, 9/8, 9/23,9/24,9/33,
9/34, 9/42, 9/47, 9/55, 9/56
Locks for
Miniature circuit breakers
Residual current protective devices
19/26
19/47
LOGO!
AS-Interface connections
AS-Interface connections for LOGO!
CM EIB/KNX communications modules
Contact
7/21,
Modular basic variants
7/25,
Modular expansion modules
Modular pure variants
7/23,
Software
7/20
LOGO! logic modules
2/57
7/28
7/27
7/29
7/22
7/26
7/24
7/30
... 7/30
11/2, 11/11
LOGO!Power
LV HRC
SR60 bus-mounting fuse bases
19/131
K
2/16, 2/17
K45F LS (light sensor)
9/32
Knobs for rotary buttons and switches
Labels
4/4
Lampholders for pushbutton units and
indicator lights
9/9, 9/10,
9/59 ... 9/62,9/88, 9/89
9/16, 9/76
Lamps
3/72
Latched contactor relays
Latching blocks mechanical
3/106
Leakage current measurement units
19/46
LED modules for
indicating contactor operation
3/110
LEDs for pushbutton units
and indicator lights
9/16, 9/76
Lenses for indicator lights
9/16, 9/75
Level monitoring
Level monitoring relays
7/58, 7/59
7/60
Level monitoring sensors
7/43
Line monitoring
Link modules
for 3RV1 motor starter protectors
... 7/46
5/29, 6/52
5/2, 5/28
Link rails
Single-pole
Two-pole
Links for paralleling
M
Magnetic coils for contactors
3/114, 3/115,
3/121, 3/127 ... 3/130
Magnetically operated switches 8/3, 8/85, 8/86
L
19/38
19/38
3/47, 3/111, 3/120, 3/123
Load feeders
Fuseless
Modules
- AS-Interface
with safety integrated
6/31
6/10, 6/68
6/2, 6/58
...
4/4
6/57
... 6/69
... 6/62
Load monitoring
4/27
Locking devices
15/26, 15/32
Main and EMERGENCY-STOP switches
17/24, 17/25
Distribution board mounting
17/26, 17/27
Molded-plastic enclosures
Main circuit connections
15/27, 15/42
... 15/43
Main control and EMERGENCY-STOP switches
17/28 ... 17/31
Accessories
17/20 ... 17/23
Floor mounting
Front mounting
17/15 ... 17/19
Mains transformers
10/5
10/2, 10/3,
... 10/48, 10/57 ... 10/62
Male connectors for lightning and
overvoltage protection devices
Masters
CP 142-2
CP 243-2
CP 343-2
CP 343-2 P
19/140
2/18
2/19
2/20
2/21
10/3, 10/49, 10/50,
Matching transformers
10/63 ... 10/73, 10/86, 10/87
with cURus approval
10/3, 10/74 ... 10/83
10/3, 10/84, 10/85
with selectable voltages
Measuring devices
Multicounters
Multimeters
Time counters
Measuring selector switches
5/50, 5/56
Mechanical RESET
15/26, 15/33
Locking mechanisms
Page
19/147
19/145, 19/150
19/160
19/156
Miniature circuit breakers
AC/DC product range
High-capacity product range
High-current product range
19/13
19/5 ... 19/18
19/12, 19/14
3/96
Miniature contactors/Power relays
16/1
Molded case circuit breakers
... 16/76
Molded-plastic enclosures
for 3RV1 motor starter protectors 5/30
... 5/32
Molded-plastic enclosures for
Residual current protective devices
19/27,19/57
Momentary contact foot switches,
9/3, 9/102, 9/103
foot switches
7/1
Monitoring devices
... 7/91
Monitoring relays for electrical
and additional measurements
Current monitoring
7/49,
7/56,
Insulation monitoring
7/58 ...
Level monitoring
Level monitoring sensors
7/43 ...
Line monitoring
Power factor and
7/51,
active current monitoring
7/53 ...
Residual current monitoring
7/61,
Speed monitoring
Summation current transformers
7/47,
Voltage monitoring
Monitoring units
for magnetically operated switches
7/50
7/57
7/60
7/60
7/46
7/52
7/55
7/62
7/55
7/48
8/86
Motor management and control devices
7/6
SIMOCODE pro 3UF7
... 7/14
5/2, 5/3, 5/6 ... 5/9,
Motor protection
16/10 ... 16/11,16/14 ... 16/17, 16/21
- with overload relay function
5/2, 5/10
Motor protection and control devices
SIMOCODE-DP 3UF5
7/15
Motor starters
24 V DC
ET 200pro
- High-Feature
- Isolator modules
- Safety modules local
- Standard
ET 200S
- High-Feature
- Interface modules
- Power modules
- Solid-state modules
- Standard
- Terminal modules
... 7/18
12/2, 12/3
Motor Starter ES
6/66 ... 6/67
6/3, 6/114 ... 6/128
6/115
6/116
6/117
6/115
6/3, 6/75 ... 6/102
6/79
6/87 ... 6/102
6/82
6/87 ... 6/102
6/78
6/83 ... 6/86
Motor starters and load feeders
IP20
IP65/67
6/68
6/63
... 6/74
... 6/67
Motor starters and soft starters
6/3, 6/63 ... 6/74
AS-Interface
ECOFAST
6/3, 6/129
Mechanical connectors
for contactor assemblies
3/39
Mechanical interlocks
for contactor assemblies
Mountable accessories
for 3RV1 motor starter protectors 5/17
... 5/20
3/37
Mounting accessories
for 3RV1 motor starter protectors 5/26
... 5/29
Mechanical latching blocks for
contactors and contactor relays
3/106
20
3/113, 6/9
Inscription labels, blank
Page
Siemens LV 1 · 2008
20/37
LV1_20.book Seite 38 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Subject index
Multicounters
Page
Page
19/147
Position switches
8/2 ... 8/76
8/18, 8/21, 8/38, 8/42, 8/43
Accessories
Actuators
8/48, 8/54
8/64 ... 8/76
AS-Interface
8/43
Contact blocks
Explosion protection (ATEX)
8/60 ... 8/63
Hinge switches 8/2, 8/56 ... 8/58, 8/75, 8/76
8/2, 8/22 ... 8/39
Metal enclosures
Open-type
8/40, 8/41
8/2, 8/8 ... 8/15
Plastic enclosures
8/43
Spare parts
with separate actuator
8/3, 8/70, 8/71
8/3, 8/73, 8/74
with tumbler
8/44 ... 8/49
wth separate actuator
wth tumbler
8/50 ... 8/55
19/145, 19/150
Multimeters
Mushroom pushbuttons and switches
9/22, 9/31, 9/46, 9/50
N
Name plates
for EMERGENCY-STOP
mushroom pushbuttons
for joystick switches
for pushbutton units and
indicator lights
9/17, 9/80
9/29
9/15, 9/70
... 9/74
NEOZED
Adapter sleeve fitters
19/63
19/63
Adapter sleeves
19/63
Busbar adapters
Fuse bases
19/60 ... 19/63
19/63
Retaining springs
19/62
Screw caps
SR60 bus-mounting bases
19/129
SR60 bus-mounting switch disconnectors
19/130
SR60 covers
19/130
Non-automatic air circuit breakers
15/1 ... 15/2,
Air
15/6 ... 15/20, 15/47 ... 15/48
15/47 ... 15/49
DC current
16/12 ... 16/13,
Molded case
16/28 ... 16/29
Non-automatic
molded case circuit breakers
16/12 ... 16/13,
16/28 ... 16/29
Non-stabilized power supplies
11/2, 11/4 ... 11/8
Filtered
Single-phase
11/2, 11/4, 11/6,
11/9, 11/11 ... 11/14
11/2, 11/7, 11/8, 11/10, 11/13
Three-phase
11/2, 11/9, 11/10
Unfiltered
O
3/106, 3/121, 3/125
OFF-delay devices
3/124
ON-delay devices for contactor relays
Operating mechanisms
for circuit breakers
15/22, 15/24,15/37,
16/39, 16/43 ... 16/48, 16/76
8/18, 8/21, 8/37, 8/38
for position switches
5/3, 5/33 ... 5/57
Overload relays
Explosion protection (ATEX) 5/38, 5/47, 5/52
2/55, 2/56
Overvoltage protection modules
P
19/26
Pillar-type variable-ratio transformers 10/2, 10/3
3/122, 3/126
Plug-in bases
Plug-in connections for position switches
Plug-in relays
Relay couplers
20
Plug-in versions
Circuit breakers
Power control regulators
4/29
Power controllers
4/30
Power distribution boards
14/7
Power factor and
active current monitoring
7/51, 7/52
13/2
Power Management System
3/89
... 3/92, 3/93 ... 3/95
16/49
Siemens LV 1 · 2008
... 16/54
3/106
... 13/3,
Power modules for ET 200S motor starters
6/82
Power relays/Miniature contactors
3/96
11/1 ... 11/16
Power supplies
Filtered
11/2, 11/4 ... 11/8
11/2, 11/11
LOGO!Power
11/2, 11/4 ... 11/10
Non-stabilized
Single-phase 11/4, 11/6, 11/9,11/11 ... 11/14
11/11 ... 11/16
SITOP
11/14
SITOP add-on modules
SITOP battery modules
11/16
11/14
SITOP buffer modules
11/15
SITOP DC UPS modules
11/2, 11/13
SITOP modular
SITOP redundancy modules
11/14
11/14
SITOP select diagnostics modules
11/14
SITOP signaling modules
SITOP smart
11/2, 11/12
11/2, 11/15, 11/16
SITOP uninterruptible
11/13, 11/14
SITOP, modular
Stabilized, SITOP
11/11 ... 11/16
11/7, 11/8, 11/10, 11/13
Three-phase
11/2, 11/9, 11/10
Unfiltered
2/58
Power supply units AS-Interface
10/2, 10/3, 10/49,
10/50, 10/63 ... 10/85
Enclosures
10/84, 10/85
10/2, 10/3,
with selectable voltages
10/49, 10/50, 10/84, 10/85
Power transformers
2/74
... 2/83, 15/41
Protection equipment
Protective caps for pushbuttons
5/1
... 5/57
9/17, 9/78
Protective collars
for pushbutton units and indicator lights
Protective devices with device holder
Pneumatic delay blocks
for contactors and contactor relays
20/38
8/42
9/9, 9/10
9/6
9/8
9/11 ... 9/15
9/9, 9/10
9/18 ... 9/96
9/75 ... 9/82
9/93
9/40 ... 9/43,
9/49 ... 9/57
- AS-Interface enclosures
9/94 ... 9/96
- Complete units
9/20 ... 9/26, 9/38,
9/39, 9/44 ... 9/48
- Contact blocks
9/59 ... 9/62
- Coordinate switches
9/27, 9/28
- Enclosures
9/3, 9/83 ... 9/93
- Indicators
9/36, 9/43, 9/58
- Inscriptions
9/65 ... 9/74, 9/90 ... 9/92
- Lampholders
9/59 ... 9/62
- Twin pushbuttons
9/36, 9/37
- Contact blocks
- Indicator lights
- Indicators
- Inscriptions
- Lampholders
Nominal diameter 22 mm
- Accessories and spare parts
- Accessories for enclosures
- Actuators
9/30 ... 9/37,
8/2
Position switches, open-type
PROFIBUS
Padlocks
Page
9/79
15/31
Pushbutton units and
9/2, 9/4 ... 9/96
indicator lights
9/4 ... 9/17
Nominal diameter 16 mm
- Accessories and spare parts
9/16, 9/17
- Actuators
9/7, 9/8
- Complete units
9/5, 9/6
9/2, 9/4, 9/5, 9/7,
Pushbuttons and switches
9/18, 9/20, 9/21, 9/30,
9/38, 9/40, 9/44, 9/45, 9/49
Push-in lugs
for 3RV1 motor starter protectors
for overload relays
5/27
5/51
R
Rated current modules
15/23, 15/31
Rating plugs
15/23, 15/31
16/55
RCD modules for circuit breakers
Relay couplers
3/82, 3/83, 3/88
... 3/92
Relays
Analogically adjustable,
7/63 ... 7/65
for 1 sensor
Digitally adjustable
7/69, 7/70
for up to 3 sensors
Digitally adjustable, for 1 sensor 7/66 ... 7/68
Remote motorized operating mechanisms
for 3RV1 motor starter
5/2, 5/24, 5/25
protectors
5/56
Remote RESET
Remote-controlled operating mechanisms for
19/46
Residual current protective devices
RESET
Cable releases
Mechanical
Remote
5/50, 5/56
5/50, 5/56
5/56
Residual current monitoring
Summation current transformers
7/55
Residual current protective devices
19/39 ... 19/57
19/46
Auxiliary switches
Enclosures
19/27, 19/57
19/46
Leakage current measurement units
19/47
Locks
Molded-plastic enclosures
19/27, 19/57
Remote-controlled operating mechanisms
19/46
Residual-current monitoring
Residual-current monitoring relays 7/53, 7/54
Retaining springs for NEOZED
Reversing contactor assemblies
19/63
3/32
... 3/36,
3/48
LV1_20.book Seite 39 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Subject index
Page
Reversing starters
6/2, 6/40 ... 6/47
6/132
Encapsulated
for busbar systems 6/44 ... 6/47, 6/72 ... 6/74
for snapping onto standard mounting rails
6/40 ... 6/44
or for screw mounting
Single-phase transformers 10/2, 10/5 ... 10/56
10/2, 10/5, 10/47 ... 10/50
AutoControl
10/2, 10/5 ... 10/19,
10/24 ... 10/41, 10/47, 10/48
10/49, 10/50
Converter
Enclosed
10/2, 10/51 ... 10/53
10/48, 10/50
Enclosures
10/2, 10/5, 10/24 ... 10/48
Isolating
- for supply of medical premises 10/2, 10/54
- Resin-enclosed
10/2, 10/53
10/2, 10/5 ... 10/48
Mains
Matching
10/49, 10/50
10/2
Pillar-type
10/2, 10/49, 10/50
Power
Safety
10/2, 10/5 ... 10/23, 10/47, 10/48
- Resin-enclosed
10/2, 10/51, 10/52
10/2
Toroidal-core
Variable-ratio
10/2
Voltage regulators
10/2, 10/56
- Magnetic type
- Transformer-type
10/2, 10/55
10/2, 10/5,
with selectable voltages
10/47 ... 10/50
wth selectable voltages
10/55
Rotary operating mechanisms
for 3RV1 circuit breakers/motor starter protec5/2, 5/24 5/25
tors
Routers
DP/AS-i F-Link
DP/AS-i LINK Advanced
DP/AS-Interface Link 20E
IE/AS-i LINK PN IO
2/22
2/29, 2/30
2/31, 2/32
2/26 ... 2/28
S
Safety modules
2/16, 2/17
Safety monitors
2/14
Safety transformers 10/2, 10/3, 10/5 ... 10/23,
10/47, 10/48, 10/57,10/61, 10/62
10/2, 10/51, 10/52
Resin-enclosed
19/142, 19/143
SCHUKO socket outlets
Screw adapters for contactors
3/111
Screw caps for NEOZED
19/62
5/29, 5/51, 5/57
Screwdrivers
5/51
Sealable covers
Selector switches for
rotary buttons and switches 9/6, 9/7, 9/23 9/24,
9/41, 9/47,9/51,9/52, 9/53, 9/54
Selector switches for
Ammeters
Voltmeters
19/156
19/156
3/86, 3/87
Semiconductor couplers
Semiconductor-motor contactors
3-phase, 3RF24
4/32
... 4/33
2/59
Shaped cables
Shunt trip units
for 3RV1 motor starter protectors 5/2, 5/17, 5/20
15/22, 15/37, 16/38,
for circuit breakers
16/40 ... 16/41, 16/76
14/11
SICUBE system cubicles
Signaling columns
9/3, 9/104
Signaling switches for
3RV1 motor starter protectors
... 9/109
5/2, 5/17,5/19
SIMARIS design
SIMATIC powercontrol
SIMATIC powercost
SIMOCODE
-DP 3UF5
pro 3UF7
7/15
7/6
2/84
2/70
... 2/86
... 2/73
11/2, 11/11 ... 11/16
SITOP
11/14
Add-on modules
Battery modules
11/16
11/14
Buffer modules
11/15, 11/16
DC UPS modules
LOGO!Power
11/2, 11/11
11/2, 11/13
Modular
11/14
Redundancy modules
Signaling modules
11/14
11/14
SITOP select diagnostics modules
Smart
11/2, 11/12
11/2, 11/15, 11/16
Uninterruptible
SITOP add-on modules
11/14
SITOP battery modules
11/16
SITOP buffer modules
11/14
SITOP DC UPS modules
11/15
11/2
SITOP modular
SITOP modular power supplies
11/2, 11/13
18/3
SITOP redundancy modules
11/14
18/4
SITOP select diagnostics modules
11/14
18/6
SITOP signaling modules
11/14
... 7/18
... 7/14
SIMOCODE 3UF motor management and
control devices, explosion protection (ATEX) 7/5
SIMOCODE ES
SIRIUS
Modular system
Safety Integrated
12/5, 12/6
Single-phase power supplies
11/2, 11/4, 11/6
Filtered
LOGO!Power
11/2, 11/11
11/2, 11/4
Non-stabilized
11/2, 11/13
SITOP modular
SITOP smart
11/2, 11/12
Stabilized
11/2, 11/11 ... 11/13
- SITOP
Unfiltered
11/2, 11/9
11/2,
SITOP uninterruptible power supplies
11/15, 11/16
SIVACON motor control centers
Slaves
Connections for LOGO!
I/O modules
- for operation in the control cabinet
2/48 ...
- for operation in the field
2/33 ...
Modules with special functions
- Counter modules
- Ground-fault detection modules
- Overvoltage protection modules 2/55,
Special integrated solutions
2/52,
- Communications modules
User modules
14/7
2/57
2/51
2/47
2/54
2/55
2/56
2/53
2/44
Page
Socket outlets
19/142, 19/143
Soft Starter ES
12/7,12/8
6/2, 6/4 ... 6/30
Soft starters
6/20 ... 6/30
for High-Feature applications
- Box terminal blocks
6/26
- Covers
6/27
- Ext. display and operator modules 6/26, 6/27
- Fans
6/27
- Inline circuit
6/21
- Inside-delta circuit
6/24
- PC cables
6/26
- PROFIBUS communications modules
6/26
- Software
6/26
6/5 ... 6/19
for standard applications
- Box terminal blocks
6/16
- Covers
6/8, 6/16
- Fans
6/8, 6/17
- Link modules
6/9
- Modules for RESET
6/16
- Push-in lugs
6/8
- Sealable covers
6/8
18/1
Software for power distribution
... 18/7
Solder pin adapters for contactors 3/110, 3/111
Solder pin connections
for 3RV1 motor starter protectors
Solid-state contactors
1-phase, 3RF23
3-phase, 3RF24
5/26, 5/27
4/5, 4/13 ... 4/20,
4/31 ... 4/33
4/14 ... 4/19
4/20
5/38 ... 5/51
5/50, 5/51
5/46 ... 5/49
5/38 ... 5/45
Solid-state overload relays
Accessories
for high-feature applications
for standard applications
Solid-state relays
1-phase, 3RF20
1-phase, 3RF21
3-phase, 3RF22
4/5, 4/7
... 4/12
4/8
... 4/10
4/11
4/12
4/2 ... 4/6
4/5 ... 4/30
4/31 ... 4/33
Solid-state switching devices
for resistive loads
for switching motors
19/26
Spacers for miniature circuit breakers
Speed monitoring
7/61, 7/62
19/124
SR60 busbar systems
Auxiliary switches
DIAZED bus-mounting bases
DIAZED covers
DIAZED gauge rings
LV HRC bus-mounting fuse bases
LV HRC fuse switch disconnectors
NEOZED bus-mounting bases
NEOZED bus-mounting
switch disconnectors
NEOZED covers
... 19/134
Stabilized power supplies
LOGO!Power
SITOP
19/131
19/130
19/130
19/130
19/131
19/131
19/129
19/131
19/130
11/2, 11/11
11/11 ... 11/16
6/10, 6/52
Standard mounting rail adapters
... 20/28
Standards
20/11
Starter combinations
Circuit breakers
5/2, 5/11
16/12 ... 16/13
Starters, encapsulated
Direct-on-line starters
Reversing starters
6/130
Siemens LV 1 · 2008
... 6/133
6/131
6/132
20/39
20
Page
LV1_20.book Seite 40 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Subject index
Page
Summation current transformers
Surge suppressors
7/55
3/107, 3/108, 3/119,
3/122, 3/124, 3/126, 6/10
17/4 ... 17/31
Switch disconnectors
17/11 ... 17/13
Accessories
Floor mounting
17/5 ... 17/9
17/47 ... 17/69
Fuses
- Assembly kits for distribution systems
17/57 ... 17/59
- for extended technical requirements
17/60, 17/61
- for extended technical requirements
with fuse monitoring
17/62 ... 17/69
- for power distribution
17/48 ... 17/50
- for power distribution
with fuse monitoring
17/51 ... 17/53
17/10
Molded-plastic enclosures
with fuses
17/33 ... 17/46
- Accessories
17/37 ... 17/40
- Double-breaks
17/46
- Double-breaks with fuse monitoring
17/46
- Front mounting
17/36
- In-line
17/45, 17/46
- Single-breaks
17/45
- Single-breaks with fuse monitoring
17/45
- Surface mounting and installation
17/34, 17/35
- with isolating plug connector 17/41 ... 17/44
15/40, 18/7
Switch ES Power
Switchgear
14/7
Switching magnets
8/86
System components and accessories
Accessories
2/65,
Addressing units
2/62 ...
Analyzers
Extension plugs
2/66
2/61
2/64
2/60
5/2, 5/3, 5/14,
16/8 ... 16/11,16/14 ... 16/17,
16/21 ... 16/34, 16/36 ... 16/37, 16/75
System protection
Page
Page
Variable-ratio
10/2, 10/3
Voltage regulators
10/2, 10/56
- Magnetic type
- Transformer-type
10/2, 10/3, 10/55, 10/88
10/2, 10/3, 10/5,
with selectable voltages
10/47 ... 10/50, 10/56, 10/57,
10/61 ... 10/63, 10/84, 10/85
Thermal overload relays
Accessories
for standard applications
5/52
... 5/56
5/52
5/56
5/55
Thermistor transformer protection
10/50,
10/54, 10/85
Three-phase busbar systems
for 3RV1 motor starter protectors
5/21
Three-phase power supplies
Filtered
Non-stabilized
Unfiltered
...
5/2,
... 5/23
11/2, 11/7, 11/8
11/2
11/2, 11/10
Three-phase transformers 10/3, 10/57 ... 10/88
Auto- 10/3, 10/57, 10/61 ... 10/63,10/84, 10/85
- for matching purposes
10/3, 10/86, 10/87
10/3, 10/57 ... 10/59,10/61, 10/62
Control
10/63, 10/84, 10/85
Converter
Enclosures
10/62, 10/84, 10/85
10/3, 10/57 ... 10/62
Isolating
10/3, 10/57 ... 10/62
Mains
Matching 10/3, 10/63 ... 10/73, 10/86, 10/87
- with cURus approval
10/3, 10/74 ... 10/83
- with selectable voltages 10/3, 10/84, 10/85
Pillar-type
10/3
10/3, 10/63 ... 10/85
Power
10/3, 10/57, 10/61, 10/62
Safety
Toroidal-core
10/3
10/3
Variable-ratio
Voltage regulators
10/3, 10/88
- Transformer-type
with selectable voltages 10/3, 10/57, 10/61,
10/61 ... 10/63, 10/84, 10/85
19/160
Time counters
Time-delay blocks for contactors
and contactor relays, solid-state
Tools for Cage Clamp
3/106
5/29, 5/51, 5/57
Transmission media
Shaped cables
2/59
Trip units
for 3RV1 motor starter protectors
5/20
9/3, 9/97
Two-hand operation consoles
U
Undervoltage releases for
3RV1 motor starter protectors
Undervoltage trip units
for circuit breakers
5/2, 5/17, 5/20
15/22, 15/37, 16/38,
16/40 ... 16/41, 16/76
4/4
Unit labeling plates
2/44
User modules
V
Vacuum contactors
3/26
... 3/28
Variable-ratio transformers
Pillar-type
Toroidal-core
10/2, 10/3
10/2, 10/3
Voltage monitoring
7/47, 7/48
Voltage regulators
Magnetic type
Transformer-type
10/2, 10/56
10/2, 10/3, 10/55, 10/88
Voltage transformer circuit breakers
5/2, 5/16
19/156
Voltmeter selector switches
Toroidal-core variable-ratio transformers
10/2, 10/3
T
Transformer protection
Temperature monitoring relays, 3RS10, 3RS11
7/63 ... 7/70
Transformers
Auto-
Terminal blocks
Accessories
14/28 ...
14/23,
Combination plug-in terminals
for 3RV1 motor starter protectors
for overload relays
Insulation displacement connection
14/25,
Plug-in connection
Screw connection
14/14 ...
14/18 ...
Spring-type connections
14/31
14/24
5/27
5/51
14/27
14/26
14/17
14/22
Terminal brackets
5/50, 5/56
Terminal covers
for 3RV1 motor starter protectors
for overload relays
5/26
5/51, 5/56
Terminal covers for
19/26
Miniature circuit breakers
Residual current protective devices
19/27, 19/57
19/160
Time counters
20
Terminal modules for ET 200S motor starters
6/83 ... 6/86
Terminals
for "Self-Protected
Combination Motor Controller"
according to UL 508
20/40
5/26, 5/27
Siemens LV 1 · 2008
5/2, 5/12, 5/15
10/1 ... 10/88
10/2, 10/3, 10/5, 10/47 ... 10/50,
10/57,10/61 ... 10/63, 10/84, 10/85
- for matching purposes
10/3, 10/86, 10/87
10/2, 10/3, 10/5 ... 10/19,
Control
10/24 ... 10/41, 10/47,10/48,
10/57 ... 10/59, 10/61, 10/62
10/49, 10/63, 10/84, 10/85
Converter
10/50
Converters
Enclosed
10/2, 10/51 ... 10/53
10/48, 10/62, 10/84, 10/85
Enclosures
10/2, 10/3, 10/5,
Isolating
10/24 ... 10/48,10/57 ... 10/62
- for supply of medical premises 10/2, 10/54
- Resin-enclosed
10/2, 10/53
Mains
10/2, 10/3, 10/5 ... 10/48,
10/57 ... 10/62
10/3, 10/49, 10/50,
Matching
10/63 ... 10/73, 10/86, 10/87
- with cURus approval
10/3, 10/74 ... 10/83
- with selectable voltages 10/3, 10/84, 10/85
Pillar-type
10/2, 10/3
Power 10/2, 10/3, 10/49, 10/50, 10/63 ... 10/85
10/2, 10/3, 10/5 ... 10/23, 10/47,
Safety
10/48, 10/57, 10/61, 10/62
- Resin-enclosed
10/2, 10/51, 10/52
10/2, 10/5 ... 10/56
Single-phase
Three-phase
10/3, 10/57 ... 10/88
10/2, 10/3
Toroidal-core
W
Wall enclosures for residual current
protective devices
19/27, 19/57
Wiring modules for contactor assemblies
Withdrawable bridging units
Withdrawable coils
3/39
15/45
3/116, 3/117
Withdrawable grounding units
15/45
Withdrawable short-circuits
15/45
Withdrawable versions
15/10 ... 15/13,
Circuit breakers
15/18 ... 15/21, 15/48, 16/49 ... 16/54
Wye-delta starting
3/49
LV1_20.book Seite 41 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
■ Overview
Order No.
Export
markings
ECCN
Page
Order No.
AL
3K
Export
markings
Page
ECCN
AL
3KL53 30-1G
N
17/33
N
N
17/5
3KL53 40-1A
N
N
17/33 ... 34
3KA50 30-1G
N
N
17/5
3KL53 40-1G
N
N
17/33
3KA50 40-1A
N
N
17/5
3KL55 30-1A
N
N
17/33
3KA50 40-1G
N
N
17/5
3KL55 30-1G
N
N
17/33
3KA51 30-1A
N
N
17/5
3KL55 40-1A
N
N
17/33 ... 34
3KA51 30-1G
N
N
17/5
3KL55 40-1G
N
N
17/33
3KA51 40-1A
N
N
17/5
3KL57 30-1A
N
N
17/33
3KA51 40-1G
N
N
17/5
3KL57 30-1G
N
N
17/33
3KA52 30-1A
N
N
17/5
3KL57 40-1A
N
N
17/33 ... 34
3KA52 30-1G
N
N
17/5
3KL57 40-1G
N
N
17/33
3KA52 40-1A
N
N
17/5
3KL61 30-1A
N
N
17/33
3KA52 40-1G
N
N
17/5
3KL61 30-1G
N
N
17/33
3KA53 30-1A
N
N
17/5
3KL61 40-1A
N
N
17/33 ... 34
3KA53 30-1G
N
N
17/5
3KL61 40-1G
N
N
17/33
3KA53 40-1A
N
N
17/5
3KL62 30-1A
N
N
17/33
3KA53 40-1G
N
N
17/5
3KL62 30-1G
N
N
17/33
3KA55 30-1A
N
N
17/5
3KM50 30-1A
N
N
17/41
3KA55 30-1G
N
N
17/5
3KM50 30-1G
N
N
17/41
3KA55 40-1A
N
N
17/5
3KM52 30-1A
N
N
17/41
3KA55 40-1G
N
N
17/5
3KM52 30-1G
N
N
17/41
3KA57 30-1A
N
N
17/5
3KM53 30-1A
N
N
17/41
3KA57 30-1G
N
N
17/5
3KM53 30-1G
N
N
17/41
3KA57 40-1A
N
N
17/5
3KM55 30-1A
N
N
17/41
3KA57 40-1G
N
N
17/5
3KM55 30-1G
N
N
17/41
3KA58 30-1A
N
N
17/5
3KM57 30-1A
N
N
17/41
3KA58 30-1G
N
N
17/5
3KM57 30-1G
N
N
17/41
3KA58 40-1A
N
N
17/5
3KX22 1
N
N
17/7, 17/12 ... 13
3KA58 40-1G
N
N
17/5
3KX22 3
N
N
17/12 ... 13
3KE42 30-0A
N
N
17/7
3KX22 50
N
N
17/12 ... 13
3KE42 30-0B
N
N
17/7
3KX22 52-0
N
N
17/13
3KE42 30-0C
N
N
17/8 ... 9
3KX22 52-1
N
N
17/12 ... 13
3KE42 30-0G
N
N
17/7
3KX31
N
N
17/11, 17/37, 17/43
3KE43 30-0A
N
N
17/7
3KX35 0
N
N
17/36 ... 37, 17/42 ... 43
3KE43 30-0B
N
N
17/7
3KX35 1
N
N
17/6, 17/11, 17/35 ... 36, 17/42
3KE43 30-0C
N
N
17/8 ... 9
3KX35 2
N
N
17/35 ... 36, 17/42
3KE43 30-0G
N
N
17/7
3KX35 3
N
N
17/6, 17/11, 17/35 ... 36, 17/42
3KE44 30-0A
N
N
17/7
3KX35 52-3D
N
N
17/11, 17/36, 17/42
3KE44 30-0B
N
N
17/7
3KX35 52-3E
N
N
17/11, 17/37, 17/43
3KE44 30-0C
N
N
17/8 ... 9
3KX35 53
N
N
17/11, 17/36, 17/42
3KE44 30-0G
N
N
17/7
3KX35 56
N
N
17/6, 17/35
3KE45 30-0A
N
N
17/7
3KX35 57
N
N
17/11 ... 12, 17/37, 17/43
3KE45 30-0B
N
N
17/7
3KX35 6
N
N
17/38
3KE45 30-0C
N
N
17/8 ... 9
3KX36
N
N
17/38
3KE45 30-0G
N
N
17/7
3KY22 0
N
N
17/12
3KL50 30-1A
N
N
17/33
3KY22 32
N
N
17/13
3KL50 30-1G
N
N
17/33
3KY22 34
N
N
17/13
3KL50 40-1A
N
N
17/33 ... 34
3L
3KL50 40-1G
N
N
17/33
3LD20 0
N
N
17/15 ... 16
3KL52 30-1A
N
N
17/33
3LD20 1
N
N
17/20 ... 21, 17/23
3KL52 30-1G
N
N
17/33
3LD20 2
N
N
17/17
3KL52 40-1A
N
N
17/33 ... 34
3LD20 3
N
N
17/24 ... 25
3KL52 40-1G
N
N
17/33
3LD20 4
N
N
17/20, 17/22
3KL53 30-1A
N
N
17/33
3LD20 5
N
N
17/15 ... 16, 17/18
Siemens LV 1 · 2008
20
N
3KA50 30-1A
20/41
LV1_20.book Seite 42 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
ECCN
AL
N
N
17/26
3NC24 31-3
on req.
3LD21 0
N
N
17/15 ... 16, 17/19
3NC24 31-3C
N
N
17/55, 17/67, 19/114
3LD21 1
N
N
17/20 ... 21, 17/23
3NC24 32-0
N
N
19/114
3LD21 2
N
N
17/17, 17/19
3NC24 32-3
on req.
3LD21 3
N
N
17/24 ... 25
3NC24 32-3C
N
N
17/39, 17/67, 19/114
3LD21 4
N
N
17/20, 17/22
3NC3
N
N
19/116 ... 118
3LD21 5
N
N
17/15 ... 16, 17/18
3NC5
N
N
19/119
3LD21 6
N
N
17/26 ... 27
3NC73 2
N
N
19/119
3LD22 0
N
N
17/15 ... 16, 17/19
3NC73 3
N
N
19/119
3LD22 1
N
N
17/20 ... 21, 17/23
3NC8
N
N
17/39, 17/55, 17/67, 19/114
3LD22 2
N
N
17/17, 17/19
3ND
N
N
19/88
3LD22 3
N
N
17/24 ... 25
3NE1
N
N
3LD22 4
N
N
17/20, 17/22
17/38 ... 39, 17/54, 17/66,
19/114 ... 116
3LD22 5
N
N
17/15 ... 16, 17/18
3NE32
N
N
17/39, 17/55, 17/66, 19/117
3NE33
N
N
17/39, 17/55, 17/67, 19/117
3NE34
N
N
19/117
3NE35
N
N
19/119
3NE36 2
N
N
19/117
3NE36 35-0
N
N
19/117
3NE36 35-6
N
N
19/117
3NE36 36
N
N
19/117
3NE36 37
N
N
19/117 ... 118
3NE4
N
N
17/39, 17/55, 17/66 ... 67, 19/117,
19/119
3LD25 0
3LD25 1
3LD25 2
3LD25 3
3LD25 4
3LD25 5
3LD25 6
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
ECCN
Page
3LD20 6
3LD22 6
17/26 ... 27
17/15 ... 16, 17/19
17/20 ... 21, 17/23
17/19
17/24 ... 25
17/20, 17/22
17/15 ... 16
17/26 ... 27
AL
17/39
17/55
3LD27
N
N
17/15 ... 16, 17/19 ... 21, 17/24 ... 27
3LD28
N
N
17/15 ... 16, 17/20 ... 21, 17/24 ... 26
3NE5
N
N
19/118
3LD92 00
N
N
17/16 ... 18, 17/21 ... 22, 17/24 ... 26,
17/28 ... 31
3NE6
N
N
19/119
3NE7
N
N
19/118
3NE8
N
N
17/39, 17/55, 17/66, 19/115 ... 116
3NE9
N
N
19/119
3NG
N
N
19/96
3NH
N
N
19/93 ... 95, 19/131
3NJ41
N
N
17/70 ... 71
3LD92 01
3LD92 20
3LD92 21
N
N
N
N
N
N
17/28
17/17 ... 18, 17/24 ... 25, 17/29
17/29
3LD92 24
N
N
17/28 ... 29
3LD92 50
N
N
17/15 ... 16, 17/20, 17/22,
17/24 ... 25, 17/30
3LD92 51
N
N
17/30
3NJ49 11-1
N
N
17/73
3LD92 80
N
N
17/15 ... 16, 17/20 ... 21, 17/24 ... 26,
17/31
3NJ49 11-2
N
N
17/73
3NJ49 11-3
N
N
17/73
3NJ49 11-4
N
N
17/73
3NJ49 11-5A
N
N
17/73
3NJ49 11-5B
on req.
17/73
3NJ49 11-5C
on req.
17/73
3NJ49 11-6
on req.
3NJ49 12-1A
N
N
3NJ49 12-1D
N
N
17/72
3NJ49 12-2
N
N
17/72
3NJ49 12-3
N
N
17/72
3NJ49 13
N
N
17/73
3NJ49 14
N
N
17/73
3NJ49 15-1B
N
N
17/73
3NJ49 15-1C
N
N
17/73
3NJ49 15-1E
N
N
17/74
3NJ49 15-1F
N
N
17/74
3NJ49 15-2B
N
N
17/73
3NJ49 15-2C
N
N
17/73
3NJ49 15-2D
N
N
17/74
3NJ49 15-2E
N
N
17/74
3NJ49 15-2F
N
N
17/74
3LD92 81
N
N
17/31
3LD92 84
N
N
17/30 ... 31
3LD92 86
N
N
17/28 ... 31
3N
20
Export
markings
3NA
N
N
19/82 ... 87
3NC10 00
EAR99H
N
19/122
3NC10 03
N
N
19/121
3NC10 06
N
N
19/121
3NC10 08
N
N
19/121
3NC10 1
N
N
19/121
3NC10 2
N
N
19/121
3NC10 32
N
N
19/121
3NC10 38
EAR99H
N
19/122
3NC10 38-1
N
N
19/122
3NC10 38-2
N
N
19/122
3NC10 38-3
N
N
19/122
3NC10 9
N
N
19/122
3NC14
N
N
19/121 ... 122
3NC22
N
N
19/121 ... 122
3NC24 2
N
N
17/39, 17/55, 17/67, 19/113
3NC24 31-0
N
N
19/114
20/42
Siemens LV 1 · 2008
17/73
3NJ49 12-1B
17/72
17/72
LV1_20.book Seite 43 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3NJ49 15-2G
N
N
17/74
3NW73 23
N
N
19/73
3NJ49 15-2H
N
N
17/74
3NW73 24
N
N
19/72
3NJ49 15-2J
N
N
17/74
3NW73 33
N
N
19/73
3NJ49 15-2K
N
N
17/74
3NW73 34
N
N
19/72
3NJ49 18-0A
N
N
17/72
3NW73 53
N
N
19/73
3NJ49 18-0D
N
N
17/72
3NW73 54
N
N
19/72
3NJ49 18-0E
N
N
17/72
3NW73 63
N
N
19/73
3NJ49 18-1
N
N
17/73
3NW73 64
N
N
19/72
3NJ50
N
N
17/70
3NW74
N
N
19/131
3NJ56
N
N
17/70
3NW75
N
N
19/74
3NJ59
N
N
17/72 ... 73
3NW79
N
N
19/73
3NJ6
N
N
17/44 ... 45
3NW8
N
N
19/72
3NP40 1
N
N
14/40, 14/53, 17/47 ... 49,
19/98 ... 100, 19/131
3NX
N
N
19/89, 19/95 ... 96
3NY10
N
N
17/65, 19/109
3NY11
N
N
17/65, 17/68, 19/110
3NY12
N
N
17/53, 17/56 ... 58, 17/68,
19/106 ... 108, 19/110 ... 111
3NP40 70
N
N
17/47, 17/50, 19/98, 19/101
3NP40 75-0CE
N
N
14/40, 17/48, 19/98
3NP40 75-0CF
EAR99
N
14/40, 17/48, 19/98
3NP40 75-0CJ
N
N
14/40, 17/48, 19/98
3NY13
N
N
17/65, 19/109
3NP40 75-0CK
N
N
14/40, 17/48, 19/98
3NY14 2
N
N
17/65, 19/109
3NP40 75-0F
N
N
14/41, 17/51
3NY14 3
N
N
17/53, 19/106
3NP40 75-1
N
N
14/40 ... 41, 17/48, 17/51, 19/99
3NY15
N
N
17/65, 19/109
3NP40 76
N
N
14/53 ... 54, 17/49, 17/52, 19/100,
19/131
3NY18
N
N
17/54, 19/85, 19/106
3NY19 03
N
N
17/68, 19/111
3NY19 07
N
N
17/68, 19/111
3NY19 10
N
N
17/54, 17/65, 19/106, 19/109
3NP42 70
N
N
17/47, 17/50, 19/98, 19/101
3NP42 75
N
N
14/40 ... 41, 17/48, 17/51, 19/99
3NP42 76
N
N
14/53 ... 54, 17/49, 17/52, 19/100,
19/131
3NY19 11
N
N
17/54, 17/65, 19/106, 19/109
17/47, 17/50, 19/98, 19/101
3NY19 15
N
N
17/65, 19/109
14/53 ... 54, 17/49, 17/52, 19/100,
19/131
3NY19 4
N
N
17/68, 19/111
3NY19 9
N
N
17/53, 19/105
3NP43 70
3NP43 76
N
N
N
N
3NP44 70
N
N
17/47, 17/50, 19/98, 19/101
3NY30 30
N
N
17/54, 19/106
3NP44 76
N
N
14/53 ... 54, 17/49, 17/52, 19/100,
19/131
3NY30 33
N
N
17/65, 19/109
3NY30 34
N
N
17/65, 19/109
3NY30 35
N
N
17/54, 19/106
3NP50 60
N
N
17/59, 17/61, 17/63, 19/102 ... 104
3NP50 65
N
N
17/60, 17/62, 17/64, 19/102 ... 103,
19/105
3NY4
N
N
17/65, 19/110
3NY7
N
N
17/53 ... 54, 17/56, 17/58,
19/105 ... 107, 19/109, 19/131
3NP52
N
N
17/59, 17/61, 17/63, 19/102 ... 104
3NP53
N
N
17/59, 17/61, 17/63, 19/102 ... 104
3NP54
N
N
17/59, 17/61, 17/63, 19/102 ... 104
3RA11
N
N
6/32 ... 39
3NW1
N
N
19/75
3RA12
N
N
6/40 ... 47
3NW2
N
N
19/75
3RA13
N
N
3/33 ... 36
3NW3
N
N
19/75
3RA14 1
N
N
3/42
3NW6
N
N
19/71
3RA14 23-8XC21-1AC EAR99
N
3/43
3NW70 13
N
N
19/73
3RA14 23-8XC21-1AG N
N
3/43
3NW70 14
N
N
19/72
3RA14 23-8XC21-1AL EAR99
N
3/43
3NW70 23
N
N
19/73
3RA14 23-8XC21-1B
EAR99
N
3/43
3NW70 24
N
N
19/72
3RA14 25-8XC21-1AC EAR99
N
3/43
3NW70 33
N
N
19/73
3RA14 25-8XC21-1AG N
N
3/43
3NW70 34
N
N
19/72
3RA14 25-8XC21-1AL EAR99
N
3/43
3NW70 53
N
N
19/73
3RA14 25-8XC21-1B
N
N
3/43
3NW70 54
N
N
19/72
3RA14 3
N
N
3/44 ... 45
3NW70 63
N
N
19/73
3RA14 4
N
N
3/46
3NW70 64
N
N
19/72
3RA19 0
N
N
6/51
3NW71
N
N
19/72 ... 73
3RA19 11
N
N
5/28 ... 29, 6/9, 6/50, 6/52
3NW72
N
N
19/72 ... 73
3RA19 12
N
N
3/39
3NW73 13
N
N
19/73
3RA19 13-1
N
N
6/53
3NW73 14
N
N
19/72
3RA19 13-2
EAR99
N
3/38, 3/47, 6/50
Siemens LV 1 · 2008
20
3R
20/43
LV1_20.book Seite 44 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
20
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RA19 13-3
N
N
3/39, 3/47
3RB23
N
N
5/48
3RA19 21
N
N
5/28, 6/9, 6/17, 6/50
3RB29 0
N
N
5/49
3RA19 22
N
N
3/39, 5/29, 6/10, 6/51 ... 52
3RB29 1
N
N
5/50
3RA19 23
N
N
3/37 ... 39, 3/47, 6/50 ... 51, 6/53
3RB29 2
N
N
5/50
3RA19 24
N
N
3/37, 6/51
3RB29 5
N
N
5/49
3RA19 31
N
N
5/28, 6/9, 6/17, 6/50
3RB29 6
N
N
5/49
3RA19 32
N
N
3/39, 3/47, 6/51
3RB29 8
N
N
5/48 ... 49, 5/51
3RA19 33
N
N
3/38 ... 39, 3/47, 6/50 ... 51, 6/53
3RE10
N
N
6/131
3RA19 41
N
N
5/28, 6/9, 6/17, 6/50
3RE13
N
N
6/132
3RA19 42
N
N
3/39, 3/47, 6/51
3RE19 13-1
EAR99
N
6/133
3RA19 43
N
N
3/38 ... 39, 3/47, 6/50 ... 51
3RE19 13-2
N
N
6/133
3RA19 52
N
N
3/37, 3/47
3RE19 2
N
N
6/133
3RA19 53
N
N
3/38 ... 39, 3/47
3RE19 3
N
N
6/133
3RA19 54
N
N
3/37
3RF20 20-1AA02
N
N
4/11
3RA19 62
N
N
3/37, 3/47
3RF20 20-1AA04
EAR99
N
4/11
3RA19 63
N
N
3/38, 3/47
3RF20 20-1AA2
EAR99
N
4/11
3RA19 72
N
N
3/37, 3/47
3RF20 20-1AA4
N
N
4/11
3RA19 73
N
N
3/38, 3/47
3RF20 30-1AA02
N
N
4/11
3RA51
EAR99
N
6/71
3RF20 30-1AA04
EAR99
N
4/11
3RA52
N
N
6/73
3RF20 30-1AA06
EAR99
N
4/11
3RA71 00
N
N
6/62
3RF20 30-1AA2
EAR99
N
4/11
3RA71 01-0A
N
N
6/58 ... 59
3RF20 30-1AA4
N
N
4/11
3RA71 01-0B
N
N
6/58 ... 59
3RF20 30-1B
EAR99
N
4/11
3RA71 01-0C
N
N
6/58 ... 59
3RF20 50-1AA02
N
N
4/11
3RA71 01-0DA17-0AB EAR99
N
6/59
3RF20 50-1AA04
EAR99
N
4/11
3RA71 01-0DA17-0AL N
N
6/58
3RF20 50-1AA06
EAR99
N
4/11
3RA71 01-0EA17-0AB EAR99
N
6/59
3RF20 50-1AA2
EAR99
N
4/11
3RA71 01-0EA17-0AL N
N
6/58
3RF20 50-1AA44
EAR99
N
4/11
3RA71 01-0FA17-0AB EAR99
N
6/59
3RF20 50-1AA45
N
N
4/11
3RA71 01-0FA17-0AL
N
N
6/58
3RF20 50-4
N
N
4/11
3RA71 01-0G
N
N
6/58 ... 59
3RF20 70-1AA02
N
N
4/11
3RA71 01-0H
N
N
6/58 ... 59
3RF20 70-1AA04
EAR99
N
4/11
3RA71 01-0J
N
N
6/58 ... 59
3RF20 70-1AA06
EAR99
N
4/11
3RA71 01-0K
N
N
6/58 ... 59
3RF20 70-1AA2
EAR99
N
4/11
3RA71 01-1
N
N
6/58 ... 59
3RF20 70-1AA4
N
N
4/11
3RA71 02-1C
N
N
6/58 ... 59
3RF20 90-1AA02
N
N
4/11
3RA71 02-1D
N
N
6/58 ... 59
3RF20 90-1AA04
EAR99
N
4/11
3RA71 02-1E
N
N
6/58 ... 59
3RF20 90-1AA06
EAR99
N
4/11
3RA71 02-1FA26-0AB EAR99
N
6/59
3RF20 90-1AA2
EAR99
N
4/11
3RA71 02-1FA26-0AL
N
N
6/58
3RF20 90-1AA4
N
N
4/11
3RA71 02-1G
N
N
6/58 ... 59
3RF21 20-1AA02
N
N
4/8
3RA71 02-1HA26-0AB EAR99
N
6/59
3RF21 20-1AA04
EAR99
N
4/8
3RA71 02-1HA26-0AL N
N
6/58
3RF21 20-1AA2
EAR99
N
4/8
3RA71 02-1J
N
6/58 ... 59
3RF21 20-1AA4
N
N
4/8
3RA71 02-1KA26-0AB EAR99
N
6/59
3RF21 20-1B
N
N
4/8
3RA71 02-1KA26-0AL N
N
6/58
3RF21 20-2AA02
N
N
4/9
3RA71 02-4
N
N
6/58 ... 59
3RF21 20-2AA04
EAR99
N
4/9
3RA71 1
N
N
6/60, 6/62
3RF21 20-2AA2
EAR99
N
4/9
3RA71 2
N
N
6/60, 6/62
3RF21 20-2AA4
N
N
4/9
3RA71 3
N
N
6/61 ... 62
3RF21 20-3AA02
N
N
4/10
3RA71 4
N
N
6/61 ... 62
3RF21 20-3AA04
EAR99
N
4/10
3RB1
N
N
5/27, 5/51, 6/52, 7/12, 7/18
3RF21 20-3AA2
EAR99
N
4/10
3RB20
N
N
5/40 ... 43
3RF21 30-1AA02
N
N
4/8
3RB21
N
N
5/44 ... 45
3RF21 30-1AA04
EAR99
N
4/8
3RB22
N
N
5/48
3RF21 30-1AA06
EAR99
N
4/8
20/44
N
Siemens LV 1 · 2008
LV1_20.book Seite 45 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RF21 30-1AA2
EAR99
N
4/8
3RF23 10-2AA06
EAR99
N
4/17
3RF21 30-1AA4
N
N
4/8
3RF23 10-2AA2
EAR99
N
4/17
3RF21 30-1B
N
N
4/8
3RF23 10-3AA02
N
N
4/18
3RF21 50-1AA02
N
N
4/8
3RF23 10-3AA04
EAR99
N
4/18
3RF21 50-1AA04
EAR99
N
4/8
3RF23 10-3AA06
EAR99
N
4/18
3RF21 50-1AA06
EAR99
N
4/8
3RF23 10-3AA2
EAR99
N
4/18
3RF21 50-1AA2
EAR99
N
4/8
3RF23 20-1AA02
N
N
4/14
3RF21 50-1AA4
N
N
4/8
3RF23 20-1AA04
EAR99
N
4/14
3RF21 50-1BA04
N
N
4/8
3RF23 20-1AA06
EAR99
N
4/14
3RF21 50-1BA06
EAR99
N
4/8
3RF23 20-1AA1
N
N
4/14
3RF21 50-1BA2
EAR99
N
4/8
3RF23 20-1AA2
EAR99
N
4/14
3RF21 50-2AA02
N
N
4/9
3RF23 20-1AA4
N
N
4/14
3RF21 50-2AA04
EAR99
N
4/9
3RF23 20-1BA02
EAR99
N
4/15
3RF21 50-2AA06
EAR99
N
4/9
3RF23 20-1BA04
N
N
4/15
3RF21 50-2AA2
EAR99
N
4/9
3RF23 20-1BA06
EAR99
N
4/15
3RF21 50-3AA02
N
N
4/10
3RF23 20-1BA2
EAR99
N
4/15
3RF21 50-3AA04
EAR99
N
4/10
3RF23 20-1BA4
N
N
4/15
3RF21 50-3AA06
EAR99
N
4/10
3RF23 20-1CA0
EAR99
N
4/16
3RF21 50-3AA2
EAR99
N
4/10
3RF23 20-1CA22
EAR99
N
4/16
3RF21 70-1AA02
N
N
4/8
3RF23 20-1CA24
N
N
4/16
3RF21 70-1AA04
EAR99
N
4/8
3RF23 20-1CA4
EAR99
N
4/16
3RF21 70-1AA05
N
N
4/8
3RF23 20-1DA02
N
N
4/16
3RF21 70-1AA06
EAR99
N
4/8
3RF23 20-1DA04
EAR99
N
4/16
3RF21 70-1AA2
EAR99
N
4/8
3RF23 20-1DA2
EAR99
N
4/16
3RF21 70-1AA4
N
N
4/8
3RF23 20-1DA4
N
N
4/16
3RF21 70-1B
N
N
4/8
3RF23 20-2AA02
N
N
4/17
3RF21 90-1AA02
N
N
4/8
3RF23 20-2AA04
EAR99
N
4/17
3RF21 90-1AA04
EAR99
N
4/8
3RF23 20-2AA06
EAR99
N
4/17
3RF21 90-1AA06
EAR99
N
4/8
3RF23 20-2AA2
EAR99
N
4/17
3RF21 90-1AA2
EAR99
N
4/8
3RF23 20-2CA0
EAR99
N
4/17
3RF21 90-1AA4
N
N
4/8
3RF23 20-2CA22
EAR99
N
4/17
3RF21 90-1B
N
N
4/8
3RF23 20-2CA24
N
N
4/17
3RF21 90-2AA02
N
N
4/9
3RF23 20-2D
EAR99
N
4/17
3RF21 90-2AA04
EAR99
N
4/9
3RF23 20-3AA02
N
N
4/18
3RF21 90-2AA06
EAR99
N
4/9
3RF23 20-3AA04
EAR99
N
4/18
3RF21 90-2AA2
EAR99
N
4/9
3RF23 20-3AA06
EAR99
N
4/18
3RF21 90-3AA02
N
N
4/10
3RF23 20-3AA2
EAR99
N
4/18
3RF21 90-3AA04
EAR99
N
4/10
3RF23 20-3AA4
N
N
4/18
3RF21 90-3AA06
EAR99
N
4/10
3RF23 20-3DA02
N
N
4/19
3RF21 90-3AA2
EAR99
N
4/10
3RF23 20-3DA04
EAR99
N
4/19
3RF21 90-3AA4
N
N
4/10
3RF23 20-3DA2
EAR99
N
4/19
3RF22
N
N
4/12
3RF23 30-1AA02
N
N
4/14
3RF23 10-1AA02
N
N
4/14
3RF23 30-1AA04
EAR99
N
4/14
3RF23 10-1AA04
EAR99
N
4/14
3RF23 30-1AA06
EAR99
N
4/14
3RF23 10-1AA06
EAR99
N
4/14
3RF23 30-1AA1
N
N
4/14
3RF23 10-1AA12
EAR99
N
4/14
3RF23 30-1AA2
EAR99
N
4/14
3RF23 10-1AA14
N
N
4/14
3RF23 30-1AA4
N
N
4/14
3RF23 10-1AA2
EAR99
N
4/14
3RF23 30-1BA02
EAR99
N
4/15
3RF23 10-1AA4
N
N
4/14
3RF23 30-1BA04
N
N
4/15
3RF23 10-1BA02
EAR99
N
4/15
3RF23 30-1BA06
EAR99
N
4/15
3RF23 10-1BA04
N
N
4/15
3RF23 30-1BA2
EAR99
N
4/15
3RF23 10-1BA06
EAR99
N
4/15
3RF23 30-1BA4
N
N
4/15
3RF23 10-1BA2
EAR99
N
4/15
3RF23 30-1C
EAR99
N
4/16
3RF23 10-2AA02
N
N
4/17
3RF23 30-1D
N
N
4/16
3RF23 10-2AA04
EAR99
N
4/17
3RF23 30-3AA02
N
N
4/18
Siemens LV 1 · 2008
20
Order No.
20/45
LV1_20.book Seite 46 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
20
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RF23 30-3AA04
EAR99
N
4/18
3RF23 90-3AA26
EAR99
N
4/18
3RF23 30-3AA06
EAR99
N
4/18
3RF23 90-3AA4
N
N
4/18
3RF23 30-3AA2
EAR99
N
4/18
3RF23 90-3BA02
N
N
4/19
3RF23 30-3AA4
N
N
4/18
3RF23 90-3BA04
N
N
4/19
3RF23 40-1AA02
N
N
4/14
3RF23 90-3BA06
EAR99
N
4/19
3RF23 40-1AA04
EAR99
N
4/14
3RF23 90-3BA2
EAR99
N
4/19
3RF23 40-1AA06
EAR99
N
4/14
3RF24
N
N
4/20, 4/32 ... 33
3RF23 40-1AA1
N
N
4/14
3RF29
N
N
4/10, 4/19, 4/26 ... 30
3RF23 40-1AA2
EAR99
N
4/14
3RG7
EAR99H
N
2/17
3RF23 40-1AA4
N
N
4/14
3RG90 02-0DA
EAR99
N
2/51
3RF23 40-1BA02
EAR99
N
4/15
3RG90 02-0DB
EAR99
N
2/51
3RF23 40-1BA04
N
N
4/15
3RG90 02-0DC
EAR99
N
2/51
3RF23 40-1BA06
EAR99
N
4/15
3RG90 02-0DE
N
N
2/51
3RF23 40-1BA2
EAR99
N
4/15
3RG90 04-0DA
EAR99
N
2/51
3RF23 40-3AA02
N
N
4/18
3RG90 04-0DB
EAR99
N
2/51
3RF23 40-3AA04
EAR99
N
4/18
3RG90 04-0DC
EAR99
N
2/51
3RF23 40-3AA06
EAR99
N
4/18
3RG90 04-0DE
N
N
2/51
3RF23 40-3AA2
EAR99
N
4/18
3RG90 05
EAR99
N
2/53
3RF23 40-3AA4
N
N
4/18
3RH11 22-1A
N
N
3/70
3RF23 50-1AA02
N
N
4/14
3RH11 22-1B
N
N
3/70
3RF23 50-1AA04
EAR99
N
4/14
3RH11 22-1H
N
N
3/78
3RF23 50-1AA06
EAR99
N
4/14
3RH11 22-1J
N
N
3/78
3RF23 50-1AA1
N
N
4/14
3RH11 22-1K
N
N
3/78
3RF23 50-1AA2
EAR99
N
4/14
3RH11 22-1M
N
N
3/78
3RF23 50-1AA4
N
N
4/14
3RH11 22-1V
N
N
3/78
3RF23 50-1BA02
EAR99
N
4/15
3RH11 22-1W
N
N
3/78
3RF23 50-1BA04
N
N
4/15
3RH11 22-2A
N
N
3/70
3RF23 50-1BA06
EAR99
N
4/15
3RH11 22-2B
N
N
3/70
3RF23 50-1BA2
EAR99
N
4/15
3RH11 22-2H
N
N
3/78
3RF23 50-1BA4
N
N
4/15
3RH11 22-2J
N
N
3/78
3RF23 50-3AA02
N
N
4/18
3RH11 22-2K
N
N
3/59, 3/78
3RF23 50-3AA04
EAR99
N
4/18
3RH11 22-2M
N
N
3/78
3RF23 50-3AA06
EAR99
N
4/18
3RH11 22-2V
N
N
3/78
3RF23 50-3AA2
EAR99
N
4/18
3RH11 22-2W
N
N
3/78
3RF23 50-3AA4
N
N
4/18
3RH11 31-1A
N
N
3/70
3RF23 70-1BA02
EAR99
N
4/15
3RH11 31-1B
N
N
3/70
3RF23 70-1BA04
N
N
4/15
3RH11 31-1H
N
N
3/78
3RF23 70-1BA06
EAR99
N
4/15
3RH11 31-1J
N
N
3/78
3RF23 70-1BA2
EAR99
N
4/15
3RH11 31-1K
N
N
3/78
3RF23 70-3AA02
N
N
4/18
3RH11 31-1M
N
N
3/78
3RF23 70-3AA04
N
N
4/18
3RH11 31-1V
N
N
3/78
3RF23 70-3AA06
EAR99
N
4/18
3RH11 31-1W
N
N
3/78
3RF23 70-3AA2
EAR99
N
4/18
3RH11 31-2A
N
N
3/70
3RF23 70-3AA4
N
N
4/18
3RH11 31-2B
N
N
3/70
3RF23 70-3BA02
EAR99
N
4/19
3RH11 31-2H
N
N
3/78
3RF23 70-3BA04
N
N
4/19
3RH11 31-2J
N
N
3/78
3RF23 70-3BA06
EAR99
N
4/19
3RH11 31-2K
N
N
3/78
3RF23 70-3BA2
EAR99
N
4/19
3RH11 31-2M
N
N
3/78
3RF23 90-1BA02
N
N
4/15
3RH11 31-2V
N
N
3/78
3RF23 90-1BA04
N
N
4/15
3RH11 31-2W
N
N
3/78
3RF23 90-1BA06
EAR99
N
4/15
3RH11 40-1A
N
N
3/70
3RF23 90-1BA2
EAR99
N
4/15
3RH11 40-1B
N
N
3/70
3RF23 90-3AA0
N
N
4/18
3RH11 40-1H
N
N
3/78
3RF23 90-3AA22
N
N
4/18
3RH11 40-1J
N
N
3/78
3RF23 90-3AA24
EAR99
N
4/18
3RH11 40-1K
N
N
3/78
20/46
Siemens LV 1 · 2008
LV1_20.book Seite 47 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RH11 40-1M
N
N
3/78
3RK13 01-0A
N
N
6/79, 6/105
3RH11 40-1V
N
N
3/78
3RK13 01-0BB0
EAR99
N
6/78
3RH11 40-1W
N
N
3/78
3RK13 01-0BB1
N
N
6/79, 6/105
3RH11 40-2A
N
N
3/70
3RK13 01-0BB2
N
N
6/79
3RH11 40-2B
N
N
3/70
3RK13 01-0CB0
EAR99
N
6/78
3RH11 40-2H
N
N
3/78
3RK13 01-0CB1
N
N
6/79, 6/105
3RH11 40-2J
N
N
3/78
3RK13 01-0CB2
N
N
6/79
3RH11 40-2K
N
N
3/78
3RK13 01-0D
EAR99
N
6/78
3RH11 40-2M
N
N
3/78
3RK13 01-0E
EAR99
N
6/78
3RH11 40-2V
N
N
3/78
3RK13 01-0F
EAR99
N
6/78
3RH11 40-2W
N
N
3/78
3RK13 01-0G
EAR99
N
6/78
3RH12 44-1A
N
N
3/70
3RK13 01-0H
EAR99
N
6/78
3RH12 44-1B
N
N
3/70
3RK13 01-0J
EAR99
N
6/78
3RH12 44-2A
N
N
3/70
3RK13 01-0K
EAR99
N
6/78
3RH12 44-2B
N
N
3/70
3RK13 01-1
EAR99
N
6/78
3RH12 62-1A
N
N
3/70
3RK13 03-2
N
N
6/129
3RH12 62-1B
N
N
3/70
3RK13 03-5
N
N
6/129
3RH12 62-2A
N
N
3/70
3RK13 03-6B
N
N
6/129
3RH12 62-2B
N
N
3/70
EAR99
N
6/129
3RH14 22-1A
N
N
3/72
3RK13 03-6DS743AA0
3RH14 22-1B
N
N
3/72
3RK13 03-6DS743AA3
N
N
6/129
3RH14 31-1A
N
N
3/72
3RK13 03-6E
N
N
6/129
3RH14 31-1B
N
N
3/72
3RK13 04
N
N
6/115 ... 116, 6/118
3RH14 40-1A
N
N
3/72
3RK13 22
--
3RH14 40-1B
N
N
3/72
3RK13 23-2
N
N
6/129
3RH19 1
N
N
3/100, 3/102, 3/104, 6/48
EAR99
N
6/129
3RH19 21
N
N
3/100 ... 101, 3/103 ... 104, 6/48
3RK13 23-5BS443AA0
3RH19 24
N
N
3/110
N
6/129
EAR99
N
2/50
3RK13 23-5BS443AA3
N
3RK11 00-1CE
3RK11 00-1CG
EAR99
N
2/50
3RK13 23-5C
N
N
6/129
3RK13 23-6
N
N
6/129
3RK14 00-0B
EAR99
N
2/50
3RK14 00-0CD
N
N
2/53
3RK14 00-0CE0
EAR99
N
2/51
3RK14 00-0CE1
N
N
2/57, 7/28
3RK14 00-0G
N
N
2/39
3RK14 00-1B
N
N
2/39
3RK14 00-1CD
N
N
2/53
3RK14 00-1CE
N
N
2/50
3RK14 00-1CG
N
N
2/50
3RK14 00-1CQ
N
N
2/35
3RK14 00-1CR
EAR99
N
2/37
3RK14 00-1CT
N
N
2/42
3RK14 00-1D
N
N
2/35
3RK14 00-1K
EAR99
N
6/10, 6/69
3RK14 00-1MG
EAR99
N
6/10, 6/69
3RK14 00-1MQ00
N
N
2/35
3RK14 00-1MQ01
EAR99
N
6/67
3RK14 00-1MQ03
EAR99
N
6/67
3RK14 00-1N
EAR99
N
6/67
3RK14 02-0
N
N
2/50
3RK14 02-3C
N
N
2/50
3RK14 02-3K
EAR99
N
6/10, 6/69
3RK14 02-3L
EAR99
N
6/10, 6/69
3RK14 05
N
N
2/17
3RK14 08
N
N
2/35, 2/55
3RK11 00-1CQ
3RK11 05-1AE
3RK11 05-1AG
3RK11 05-1BE
3RK11 05-1BG
3RK11 07
3RK12 00-0CD
3RK12 00-0CE00
3RK12 00-0CE02
3RK12 00-0CE03
3RK12 00-0CG00
3RK12 00-0CG02
3RK12 00-0CG03
3RK12 00-0CQ
3RK12 00-0CT
3RK12 00-0CU
3RK12 00-0D
3RK12 05-0BE
3RK12 05-0BG
3RK12 05-0BQ0
3RK12 05-0BQ21
3RK12 05-0BQ24
3RK12 05-0BQ3
3RK12 05-0C
3RK12 07
N
N
N
N
on req.
N
N
N
N
EAR99
N
N
EAR99
N
N
N
N
N
N
N
N
N
N
N
2/15
2/15
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
on req.
N
2/15
2/15
on req.
N
2/35
2/46
2/53
2/50
2/50
2/54
2/50
2/50
2/54
2/35, 2/39
2/39
2/39
2/35
2/17
2/17
2/17
2/17
2/17
N
N
N
2/17, 2/42
2/17
2/46
6/64
Siemens LV 1 · 2008
20
Order No.
20/47
LV1_20.book Seite 48 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RK17 01
EAR99
N
6/10, 6/69, 6/74
3RK19 03-0CC
N
N
6/80
3RK17 02
N
N
6/65
3RK19 03-0CD
N
N
6/79
3RK18
5D992B1 N
2/15
3RK19 03-0CE
EAR99
N
6/80
3RK19 01-0C
N
N
2/35, 2/37, 2/47, 2/66, 6/67
3RK19 03-0CF
EAR99
N
6/80
3RK19 01-0E
N
N
6/10, 6/69, 6/74
3RK19 03-0CG
N
N
6/79
3RK19 01-0N
N
N
6/10, 6/69, 6/74
3RK19 03-0CH
EAR99
N
1/3, 6/79
3RK19 01-0P
N
N
6/10, 6/69, 6/74
3RK19 03-1AA
EAR99
N
6/110
3RK19 01-1A
N
N
2/17, 2/47
3RK19 03-1AB
EAR99
N
6/110
3RK19 01-1G
N
N
2/56
3RK19 03-1AC0
EAR99
N
6/110
3RK19 01-1KA00
EAR99
N
2/17, 2/35, 2/37, 2/40, 2/42, 2/47,
2/66, 6/67
3RK19 03-1AC1
N
N
6/110
3RK19 03-1AD
N
N
6/110
3RK19 03-1B
N
N
6/109
3RK19 03-1C
EAR99
N
6/109
3RK19 03-2
N
N
6/85 ... 86, 6/105, 6/113
3RK19 03-3AA
EAR99
N
6/113
3RK19 03-3AB
N
N
6/110, 6/113
3RK19 03-3AC
EAR99
N
6/105
3RK19 03-3AD
EAR99
N
6/105
3RK19 03-3AE
EAR99
N
6/110
3RK19 01-1KA01
N
N
2/17, 2/35, 2/66, 6/67
3RK19 01-1M
N
N
2/40, 2/60 ... 61, 2/66
3RK19 01-1NN
N
N
2/42, 2/65
3RK19 01-1NP
on req.
3RK19 01-1NR
N
N
2/38, 2/43, 2/65
3RK19 01-1P
N
N
2/40, 2/42, 2/66
3RK19 01-1T
N
N
2/38, 2/43, 2/65
3RK19 01-2
N
N
2/17, 2/40, 2/66
3RK19 01-3
N
N
2/38, 2/43, 2/61, 2/65 ... 66, 6/10,
6/69, 6/74
3RK19 03-3B
EAR99
N
6/113
3RK19 01-5
N
N
2/15
3RK19 03-3C
N
N
6/109, 6/113
3RK19 02-0A
N
N
2/35, 2/47, 2/66, 6/65, 6/67, 6/121
3RK19 03-3D
EAR99
N
6/109
6/65
3RK19 03-3E
N
N
6/86, 6/113
6/65
3RK19 04-2
N
N
2/61
6/65, 6/120
3RK19 04-3
EAR99
N
2/64
6/65
3RK19 11-0B
N
N
1/3
6/65, 6/120
3RK19 11-0D
EAR99
N
6/120
6/65
3RK19 11-0E
EAR99
N
6/121
N
N
6/120
3RK19 02-0CA
3RK19 02-0CB
3RK19 02-0CC
3RK19 02-0CD
3RK19 02-0CE
3RK19 02-0CG
EAR99
EAR99
EAR99
EAR99
EAR99
N
2/17
N
N
N
N
N
N
3RK19 02-0CH
N
N
6/65
3RK19 11-2BE
3RK19 02-0CJ
EAR99
N
6/65, 6/121
3RK19 11-2BF
N
N
6/120
3RK19 02-0CK
EAR99
N
6/65
3RK19 11-2BL
EAR99
N
6/120
3RK19 02-0CM
N
N
6/65
3RK19 11-2BM
EAR99
N
6/120
6/65
3RK19 11-2BS
N
N
6/120
6/65
3RK19 2
N
N
1/3, 6/79, 6/120 ... 121
6/65
3RK21
N
N
2/39
6/65
3RK22
N
N
2/35, 2/39, 2/42, 2/46, 2/50
6/65
3RK24 00-0
N
N
2/39
6/65, 6/121
3RK24 00-1B
N
N
2/39, 2/42
N
N
2/42, 2/50
3RK19 02-0CN
3RK19 02-0CP
3RK19 02-0CQ
3RK19 02-0CR
3RK19 02-0CS
3RK19 02-0CT
N
N
N
N
N
EAR99
N
N
N
N
N
N
3RK19 02-0CW
N
N
6/121
3RK24 00-1C
3RK19 03-0AA
N
N
6/85, 6/110
3RK24 00-1D
EAR99
N
2/35
3RK19 03-0AB0
EAR99
N
6/84
3RK24 00-1F
N
N
2/35, 2/50
3RK19 03-0AB1
N
N
6/84
3RK24 00-1H
EAR99
N
2/35
6/84
3RK3
N
N
2/25
6/84
3RN10 0
N
N
7/72 ... 73
6/80
3RN10 10
N
N
7/72 ... 73
6/80
3RN10 11
N
N
7/72 ... 73
6/80
3RN10 12
N
N
7/72 ... 73
6/80
3RN10 13-1BB
N
N
7/72
EAR99
N
7/72
3RK19 03-0AC0
3RK19 03-0AC1
3RK19 03-0AE
3RK19 03-0AF
3RK19 03-0AG00
3RK19 03-0AG01
N
EAR99
N
N
N
EAR99
N
N
N
N
N
N
3RK19 03-0AH
N
N
6/80
3RN10 13-1BW0
3RK19 03-0AJ
N
N
6/80
3RN10 13-1BW1
N
N
7/72
3RK19 03-0AK
EAR99
N
6/85
3RN10 13-1G
N
N
7/72
3RK19 03-0AL
EAR99
N
6/85
3RN10 13-2BB
N
N
7/73
6/82
3RN10 13-2BW00
N
N
7/73
3/109, 6/79
3RN10 13-2BW01
EAR99
N
7/73
6/80
3RN10 13-2G
N
N
7/73
3RK19 03-0B
EAR99
3RK19 03-0CA
20
Page
3RK19 03-0CB
20/48
N
EAR99
N
N
N
Siemens LV 1 · 2008
LV1_20.book Seite 49 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
3RP19 03
N
N
2/50, 5/51, 6/8, 7/12, 7/36, 7/46,
7/48, 7/50, 7/52, 7/54, 7/59, 7/62,
7/65, 7/68, 7/70, 7/74, 7/79, 7/84,
7/88
ECCN
AL
3RN10 2
EAR99
N
7/72 ... 73
3RN10 6
EAR99
N
7/72 ... 73
3RP15 05-1AA
N
N
7/32
3RP15 05-1AP
EAR99
N
7/32
3RP2
N
N
7/38 ... 39
3RP15 05-1AQ
N
N
7/32
3RS10
N
N
7/64 ... 65, 7/67 ... 68, 7/70
3RP15 05-1AW
N
N
7/32
3RS11 00-1CD
N
N
7/64
3RP15 05-1BP
EAR99
N
7/32
3RS11 00-1CK2
N
N
7/64
3RP15 05-1BQ
N
N
7/32
3RS11 00-1CK3
EAR99
N
7/64
3RP15 05-1BT
EAR99
N
7/32
3RS11 00-2
N
N
7/65
3RP15 05-1BW
N
N
7/32
3RS11 01
N
N
7/64
N
N
7/64
3RP15 05-1R
EAR99
N
7/32
3RS11 20-1DD
3RP15 05-2AP
EAR99
N
7/33
3RS11 20-1DW2
N
N
7/64
3RP15 05-2AQ
N
N
7/33
3RS11 20-1DW3
EAR99
N
7/64
3RP15 05-2AW
N
N
7/33
3RS11 20-2
N
N
7/65
3RP15 05-2BP
EAR99
N
7/33
3RS11 21
N
N
7/64
3RP15 05-2BQ
N
N
7/33
3RS11 4
N
N
7/67 ... 68
3RP15 05-2BW
N
N
7/33
3RS17
N
N
7/90 ... 91
3RP15 05-2R
EAR99
N
7/33
3RS18
N
N
3/88
3RP15 1
N
N
7/32 ... 33
3RS19
N
N
7/68, 7/70
3RP15 25-1AP
EAR99
N
7/32
3RS2
N
N
7/67 ... 68
N
N
3/15
3RP15 25-1AQ
N
N
7/32
3RT10 15-1A
3RP15 25-1B
N
N
7/32
3RT10 15-1B
N
N
3/19
3RP15 25-2AP
EAR99
N
7/33
3RT10 15-1H
N
N
3/79
3RP15 25-2AQ
N
N
7/33
3RT10 15-1J
N
N
3/79
3RP15 25-2B
N
N
7/33
3RT10 15-1K
N
N
3/79
3RP15 27
N
N
7/32 ... 33
3RT10 15-1M
N
N
3/80
3RP15 3
N
N
7/34 ... 35
3RT10 15-1V
N
N
3/80
3RP15 40-1A
N
N
7/34
3RT10 15-1W
N
N
3/80
3RP15 40-1BB
N
N
7/34
3RT10 15-2A
N
N
3/15
3RP15 40-1BJ
N
N
7/34
3RT10 15-2B
N
N
3/19
N
N
3/79
3RP15 40-1BN
EAR99
N
7/34
3RT10 15-2H
3RP15 40-2A
N
N
7/35
3RT10 15-2J
N
N
3/79
3RP15 40-2BB
N
N
7/35
3RT10 15-2K
N
N
3/79
3RP15 40-2BJ
N
N
7/35
3RT10 15-2M
N
N
3/80
3RP15 40-2BN
EAR99
N
7/35
3RT10 15-2V
N
N
3/80
3RP15 55-1AP
EAR99
N
7/34
3RT10 15-2W
N
N
3/80
3RP15 55-1AQ
N
N
7/34
3RT10 16-1A
N
N
3/15
3RP15 55-1AR
N
N
7/34
3RT10 16-1B
N
N
3/19
3RP15 55-2AP
EAR99
N
7/35
3RT10 16-1H
N
N
3/79
3RP15 55-2AQ
N
N
7/35
3RT10 16-1J
N
N
3/79
N
N
3/79
3RP15 55-2AR
N
N
7/35
3RT10 16-1K
3RP15 60-1SP
EAR99
N
7/34
3RT10 16-1M
N
N
3/80
3RP15 60-1SQ
N
N
7/34
3RT10 16-1V
N
N
3/80
3RP15 60-2
EAR99
N
7/35
3RT10 16-1W
N
N
3/80
3RP15 74-1NM
N
N
7/34
3RT10 16-2A
N
N
3/15
3RP15 74-1NP
EAR99
N
7/34
3RT10 16-2B
N
N
3/19
3RP15 74-1NQ
N
N
7/34
3RT10 16-2H
N
N
3/79
3RP15 74-2NM
N
N
7/35
3RT10 16-2J
N
N
3/79
3RP15 74-2NP
EAR99
N
7/35
3RT10 16-2K
N
N
3/79
3RP15 76
N
N
7/34 ... 35
3RT10 16-2M
N
N
3/80
N
N
3/80
3RP19 01
N
N
7/36, 7/40
3RT10 16-2V
3RP19 02
N
N
2/15, 2/50, 6/8, 7/36, 7/46, 7/48,
7/50, 7/52, 7/54, 7/59, 7/62, 7/65,
7/79, 7/84
3RT10 16-2W
N
N
3/80
3RT10 17-1A
N
N
3/15
3RT10 17-1B
N
N
3/19
3RT10 17-1H
N
N
3/79
Siemens LV 1 · 2008
20
Order No.
20/49
LV1_20.book Seite 50 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
20
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RT10 17-1J
N
N
3/79
3RT10 36-1X
N
N
3/63
3RT10 17-1K
N
N
3/79
3RT10 36-3A
N
N
3/17
3RT10 17-1M
N
N
3/80
3RT10 36-3B
N
N
3/21
3RT10 17-1V
N
N
3/80
3RT10 36-3K
N
N
3/62
3RT10 17-1W
N
N
3/80
3RT10 36-3X
N
N
3/63
3RT10 17-2A
N
N
3/15
3RT10 44-1A
N
N
3/18
3RT10 17-2B
N
N
3/19
3RT10 44-1B
N
N
3/21
3RT10 17-2H
N
N
3/79
3RT10 44-1X
N
N
3/63
3RT10 17-2J
N
N
3/79
3RT10 44-3A
N
N
3/18
3RT10 17-2K
N
N
3/62, 3/79
3RT10 44-3B
N
N
3/21
3RT10 17-2M
N
N
3/80
3RT10 44-3K
N
N
3/62
3RT10 17-2V
N
N
3/80
3RT10 44-3X
N
N
3/63
3RT10 17-2W
N
N
3/80
3RT10 45-1A
N
N
3/18
3RT10 23-1A
N
N
3/16
3RT10 45-1B
N
N
3/21
3RT10 23-1B
N
N
3/20
3RT10 45-1X
N
N
3/63
3RT10 23-3A
N
N
3/16
3RT10 45-3A
N
N
3/18
3RT10 23-3B
N
N
3/20
3RT10 45-3B
N
N
3/21
3RT10 24-1A
N
N
3/16
3RT10 45-3K
N
N
3/62
3RT10 24-1B
N
N
3/20
3RT10 45-3X
N
N
3/63
3RT10 24-1K
N
N
3/81
3RT10 46-1A
N
N
3/18
3RT10 24-3A
N
N
3/16
3RT10 46-1B
N
N
3/21
3RT10 24-3B
N
N
3/20
3RT10 46-1X
N
N
3/63
3RT10 24-3K
N
N
3/81
3RT10 46-3A
N
N
3/18
3RT10 25-1A
N
N
3/16
3RT10 46-3B
N
N
3/21
3RT10 25-1B
N
N
3/20
3RT10 46-3K
N
N
3/62
3RT10 25-1K
N
N
3/81
3RT10 46-3X
N
N
3/63
3RT10 25-1X
N
N
3/63
3RT10 54-1A
N
N
3/22
3RT10 25-3A
N
N
3/16
3RT10 54-1N
N
N
3/23
3RT10 25-3B
N
N
3/20
3RT10 54-1P
N
N
3/24
3RT10 25-3K
N
N
3/62, 3/81
3RT10 54-1QF
EAR99
N
3/24
3RT10 25-3X
N
N
3/63
3RT10 54-1QP
N
N
3/24
3RT10 26-1A
N
N
3/16
3RT10 54-3
N
N
3/22 ... 23
3RT10 26-1B
N
N
3/20
3RT10 55-2
N
N
3/22 ... 23
3RT10 26-1K
N
N
3/81
3RT10 55-6A
N
N
3/22
3RT10 26-1X
N
N
3/63
3RT10 55-6N
N
N
3/23
3RT10 26-3A
N
N
3/16
3RT10 55-6P
N
N
3/24
3RT10 26-3B
N
N
3/20
3RT10 55-6QF
EAR99
N
3/24
3RT10 26-3K
N
N
3/62, 3/81
3RT10 55-6QP
N
N
3/24
3RT10 26-3X
N
N
3/63
3RT10 56-2
N
N
3/22 ... 23
3RT10 34-1A
N
N
3/17
3RT10 56-6A
N
N
3/22
3RT10 34-1B
N
N
3/21
3RT10 56-6N
N
N
3/23
3RT10 34-1X
N
N
3/63
3RT10 56-6P
N
N
3/24
3RT10 34-3A
N
N
3/17
3RT10 56-6QF
EAR99
N
3/24
3RT10 34-3B
N
N
3/21
3RT10 56-6QP
N
N
3/24
3RT10 34-3K
N
N
3/62
3RT10 6
N
N
3/22 ... 24
3RT10 34-3X
N
N
3/63
3RT10 7
N
N
3/22 ... 24
3RT10 35-1A
N
N
3/17
3RT12
N
N
3/26
3RT10 35-1B
N
N
3/21
3RT13 16-1A
N
N
3/52
3RT10 35-1X
N
N
3/63
3RT13 16-1B
N
N
3/53
3RT10 35-3A
N
N
3/17
3RT13 16-2A
N
N
3/52
3RT10 35-3B
N
N
3/21
3RT13 16-2B
N
N
3/53
3RT10 35-3K
N
N
3/62
3RT13 17-1A
N
N
3/52
3RT10 35-3X
N
N
3/63
3RT13 17-1B
N
N
3/53
3RT10 36-1A
N
N
3/17
3RT13 17-2A
N
N
3/52
3RT10 36-1B
N
N
3/21
3RT13 17-2B
N
N
3/53
20/50
Siemens LV 1 · 2008
LV1_20.book Seite 51 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RT13 25-1A
N
N
3/52
3RT19 24-5AN62
EAR99
N
3/114
3RT13 25-1B
N
N
3/53
3RT19 24-5AP
N
N
3/114
3RT13 26-1A
N
N
3/52
3RT19 24-5AR
N
N
3/114
3RT13 26-1B
N
N
3/53
3RT19 24-5AV
N
N
3/114
3RT13 36-1A
N
N
3/52
3RT19 26-1
N
N
3/107 ... 108, 3/110, 6/49
3RT13 36-1B
N
N
3/53
3RT19 26-2C
N
N
3/106, 7/42
3RT13 44-1A
N
N
3/52
3RT19 26-2D
N
N
3/106, 7/42
3RT13 44-1B
N
N
3/53
3RT19 26-2E
N
N
3/105, 7/41
3RT13 46-1A
N
N
3/52
3RT19 26-2F
N
N
3/105
3RT13 46-1B
N
N
3/53
3RT19 26-2G
N
N
3/105
3RT14 46-1A
N
N
3/50
3RT19 26-2P
N
N
3/106
3RT14 46-1B
N
N
3/50
3RT19 26-3
N
N
3/106
3RT14 56-6A
N
N
3/51
3RT19 26-4B
N
N
3/47, 3/111
3RT14 56-6N
N
N
3/51
3RT19 26-4C
N
N
3/47
3RT14 56-6P
N
N
3/51
3RT19 26-4M
N
N
3/112
3RT14 56-6Q
EAR99
N
3/51
3RT19 26-4P
N
N
3/111
3RT14 6
N
N
3/51
3RT19 26-4R
N
N
3/110, 6/50
3RT14 7
N
N
3/51
3RT19 34-5
N
N
3/114 ... 115
3RT15 16-1A
N
N
3/57
3RT19 34-6
N
N
3/118
3RT15 16-1B
N
N
3/57
3RT19 35-5
N
N
3/114
3RT15 16-2A
N
N
3/57
3RT19 35-6
N
N
3/118
3RT15 16-2B
N
N
3/57
3RT19 36-1
N
N
3/108, 6/49
3RT15 17-1A
N
N
3/57
3RT19 36-4B
N
N
3/47, 3/111
3RT15 17-1B
N
N
3/57
3RT19 36-4E
N
N
3/112, 5/26, 5/51, 5/56, 6/8, 6/16
3RT15 17-2A
N
N
3/57
3RT19 36-6
N
N
3/118
3RT15 17-2B
N
N
3/57
3RT19 36-7
N
N
3/118
3RT15 26-1A
N
N
3/57
3RT19 44-5AB
N
N
3/115
3RT15 26-1B
N
N
3/57
3RT19 44-5AC
N
N
3/115
3RT15 35-1A
N
N
3/57
3RT19 44-5AD
N
N
3/115
3RT15 35-1B
N
N
3/57
3RT19 44-5AF
N
N
3/115
3RT16
N
N
3/58
3RT19 44-5AG
N
N
3/115
3RT19 00-1SB1
N
N
3/113, 4/4, 5/57
3RT19 44-5AH
N
N
3/115
3RT19 00-1SB2
N
N
3/113, 4/4, 5/57, 6/9, 6/126, 7/36,
7/40, 7/46, 7/48, 7/50, 7/52, 7/54,
7/59, 7/62, 7/65, 7/68, 7/70, 7/74
3RT19 44-5AK
N
N
3/115
3RT19 44-5AL
N
N
3/115
3/113, 4/4, 5/57, 6/9
3RT19 44-5AN2
N
N
3/115
3/113, 4/4, 5/57, 6/9
3RT19 44-5AN61
N
N
3/115
3/110, 6/50
3RT19 44-5AN62
EAR99
N
3/115
3/107 ... 109, 6/49
3RT19 44-5AP
N
N
3/115
N
N
3/115
3RT19 00-1SB6
3RT19 00-1SD
3RT19 00-4
3RT19 16-1
N
N
N
N
N
N
N
N
3RT19 16-2
N
N
3/105 ... 106, 7/41 ... 42
3RT19 44-5AR
3RT19 16-4B
N
N
3/47, 3/111, 3/123
3RT19 44-5AV
N
N
3/115
3RT19 16-4J
N
N
3/113
3RT19 44-5B
N
N
3/115
3RT19 16-4K
N
N
3/110 ... 111
3RT19 44-6
N
N
3/118
3/112
3RT19 45-5
N
N
3/115
3/110, 6/50
3RT19 45-6
N
N
3/118
3/39
3RT19 46-4B
N
N
3/47, 3/111
3/114
3RT19 46-4E
N
N
3/112, 5/26, 5/51, 5/56, 6/8, 6/16
3/114
3RT19 46-4F
N
N
3/110, 5/27, 6/16
3/114
3RT19 46-4G
N
N
5/27
N
N
3/118
3RT19 16-4M
3RT19 16-4R
3RT19 22
3RT19 24-5AB
3RT19 24-5AC
3RT19 24-5AD
N
N
N
N
N
N
N
N
N
N
N
N
N
N
3/114
3RT19 24-5AG
N
N
3/114
3RT19 46-7
N
N
3/118
3RT19 24-5AH
N
N
3/114
3RT19 54-6
N
N
3/118
3RT19 24-5AK
N
N
3/114
3RT19 54-7
N
N
3/118
3/114
3RT19 55-4
N
N
3/112, 5/51, 6/16, 6/26, 7/12
3/114
3RT19 55-5A
N
N
3/116
3/114
3RT19 55-5N
N
N
3/117
3RT19 24-5AL
3RT19 24-5AN2
3RT19 24-5AN61
N
N
N
N
N
N
Siemens LV 1 · 2008
20
3RT19 24-5AF
3RT19 46-6
20/51
LV1_20.book Seite 52 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
20
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RT19 55-5P
N
N
3/117
3RV19 02-1AF
N
N
5/20
3RT19 55-5QF
EAR99
N
3/117
3RV19 02-1AM
N
N
5/20
3RT19 55-5QP
N
N
3/117
3RV19 02-1AP
N
N
5/20, 6/48
3RT19 55-6
N
N
3/118
3RV19 02-1AS
N
N
5/20
3RT19 55-7
N
N
3/118
3RV19 02-1AV
N
N
5/20
3RT19 56-1
N
N
3/108
3RV19 02-1D
N
N
5/20, 6/48
3RT19 56-4B
N
N
3/47, 3/111
3RV19 03
N
N
5/32
3RT19 56-4E
N
N
3/112, 5/51, 6/16, 6/27, 7/12
3RV19 08
N
N
5/26
3RT19 56-4G
N
N
3/112, 5/51, 6/16, 6/26, 7/12
3RV19 12
N
N
5/20
3RT19 56-6
N
N
3/118
3RV19 13
N
N
5/31 ... 32
3RT19 56-7
N
N
3/118
3RV19 15-1
N
N
5/22
3RT19 64-6A
N
N
3/118
3RV19 15-2
N
N
5/22
3RT19 64-6V
N
N
3/118
3RV19 15-3
N
N
5/22
3RT19 64-7
N
N
3/118
3RV19 15-5
N
N
3/47, 5/22
3RT19 65-5
N
N
3/116 ... 117
3RV19 15-6
N
N
5/23
3RT19 65-6A
N
N
3/118
3RV19 17-1
N
N
6/56
3RT19 65-6V
N
N
3/118
3RV19 17-4
N
N
6/56
3RT19 65-7
N
N
3/118
3RV19 17-5
N
N
6/56 ... 57
3RT19 66-1
N
N
3/109
3RV19 17-6
N
N
6/57
3RT19 66-4B
N
N
3/47, 3/111
3RV19 17-7
N
N
6/56 ... 57
3RT19 66-4E
N
N
3/112, 5/51, 6/16, 6/27, 7/12
3RV19 18
N
N
5/27
3RT19 66-4G
N
N
3/112, 5/51, 6/16, 6/26, 7/12
3RV19 21
N
N
5/19
3RT19 66-5
N
N
3/116 ... 117
3RV19 22
N
N
5/20
3RT19 66-6A
N
N
3/118
3RV19 23
N
N
5/31 ... 32
3RT19 66-6D
N
N
3/118
3RV19 25
N
N
5/22
3RT19 66-6V
N
N
3/118
3RV19 26
N
N
5/25
3RT19 66-7
N
N
3/118
3RV19 27
N
N
6/56
3RT19 75-5
N
N
3/116 ... 117
3RV19 28
N
N
5/19, 5/27
3RT19 75-6A
N
N
3/118
3RV19 33
N
N
5/31
3RT19 75-6V
N
N
3/118
3RV19 35-1
N
N
3/47, 5/22
3RT19 75-7
N
N
3/118
3RV19 35-3
N
N
5/22
3RT19 76-6A
N
N
3/118
3RV19 35-5
N
N
3/47, 5/22
3RT19 76-6D
N
N
3/118
3RV19 35-6
N
N
5/23
3RT19 76-6V
N
N
3/118
3RV19 36-2
N
N
5/25
3RT19 76-7
N
N
3/118
3RV19 36-3
N
N
5/25
3RU11
N
N
5/53 ... 55
3RV19 38
EAR99
N
5/19
3RU19 00-1
N
N
5/50, 5/56, 6/16
3RV19 46-2
N
N
5/25
3RU19 00-2
N
N
5/56, 6/16
3RV19 46-3
N
N
5/25
3RU19 1
N
N
5/56
3RW2
N
N
7/18
3RU19 2
N
N
5/56
3RW30 0
on req.
6/6
3RU19 3
N
N
5/56
3RW30 1
on req.
6/6
3RU19 4
EAR99
N
5/56
3RW30 24
on req.
6/6
3RV10
N
N
5/6 ... 9
3RW30 25
on req.
3RV11
N
N
5/10
3RW30 26-1AA
EAR99
3RV13
N
N
5/11
3RW30 26-1AB
on req.
3RV14
N
N
5/12
3RW30 34
on req.
3RV16 11-0
N
N
5/13
3RW30 35-1AA
N
3RV16 11-1
N
N
5/16
3RW30 35-1AB
on req.
6/6
3RV17
N
N
5/14
3RW30 36
on req.
6/6
3RV18
N
N
5/15
3RW30 44
on req.
3RV19 01-0
N
N
5/18
3RW30 45-1AA
EAR99
3RV19 01-1
N
N
5/13, 5/16, 5/18, 6/48
3RW30 45-1AB
on req.
3RV19 01-2
N
N
5/18
3RW30 46
on req.
3RV19 02-1AB0
N
N
5/20
3RW31
N
N
6/7
3RV19 02-1AB4
N
N
5/20
3RW39
N
N
6/8
20/52
Siemens LV 1 · 2008
6/6
N
6/7
6/6
6/6
N
6/7
6/6
N
6/7
6/6
6/6
LV1_20.book Seite 53 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3RW40
N
N
6/13 ... 15
3SB30 00-0E
N
N
5/50, 5/56, 6/16, 9/26
3RW44
N
N
6/21 ... 25
3SB30 00-1
N
N
9/31, 9/35
3RW49 00-0A
N
N
6/26
3SB30 00-2
N
N
9/32
3RW49 00-0K
N
N
1/8, 6/26
3SB30 00-3
N
N
9/33 ... 34
3RW49 00-0PB0
N
N
6/16
3SB30 00-4
N
N
9/33 ... 34
3RW49 00-0PB1
EAR99
N
6/16
3SB30 00-5
N
N
9/33 ... 34
3RW49 2
EAR99
N
6/17
3SB30 00-7
N
N
9/36
3RW49 3
N
N
6/17, 6/27
3SB30 01
N
N
9/30 ... 32, 9/36
3RW49 47-8VB
EAR99
N
6/17
3SB31
N
N
9/36 ... 37, 9/40 ... 43
3RW49 47-8VX
N
N
6/17, 6/27
3SB32
N
N
9/20 ... 26
3RW49 5
N
N
6/27
3SB33
N
N
9/38 ... 39
3RW49 6
EAR99
N
6/27
3SB34 00-0
N
N
9/59, 16/42
3RW4c
on req.
6/13
3SB34 00-1
N
N
9/59 ... 60
3RX1
N
N
6/127
3SB34 00-2
N
N
9/60
3RX8
N
N
2/38, 2/43, 2/61, 2/64 ... 65, 6/64,
6/127, 8/42, 8/48, 8/54
3SB34 00-3
N
N
9/60
3SB34 03-0
N
N
9/61
3SB34 03-1
N
N
9/61
3SB34 11-0
N
N
9/62
3SB34 11-1
N
N
9/62
3SB34 20-0
N
N
9/88
3SB34 20-1
N
N
9/88
3SB34 23-0
N
N
9/89
3SB34 23-1
N
N
9/89
3SB34 23-2
N
N
9/89
3SB35 00-0
N
N
9/49
3SB35 00-1
N
N
9/50, 9/57
3SB35 00-2D
N
N
9/53
3RX90 10
N
N
2/59
3RX90 12
N
N
2/59
3RX90 13
N
N
2/59
3RX90 14
N
N
2/59
3RX90 15
N
N
2/59
3RX90 16
N
N
2/59
3RX90 17
N
N
2/59
3RX90 2
N
N
2/59
3RX95
N
N
2/58
3RX98
N
N
2/43, 2/51, 2/60, 2/64 ... 65, 6/64,
6/121, 6/123 ... 124, 6/126 ... 127
3S
3SB10
N
N
9/26
3SB35 00-2E
N
N
9/53
3SB12
N
N
9/27 ... 28
3SB35 00-2F
N
N
9/54
3SB14
N
N
9/29, 17/11, 17/36 ... 37, 17/42 ... 43
3SB35 00-2G
N
N
9/54
3SB19
N
N
9/29, 9/67, 9/71 ... 73, 9/76 ... 80,
9/82, 9/91, 9/93
3SB35 00-2H
N
N
9/51
3SB35 00-2K
N
N
9/51
3SB20
N
N
9/7 ... 8
3SB35 00-2L
N
N
9/52
3SB22
N
N
9/5 ... 6
3SB35 00-2P
EAR99
N
9/51
3SB23
N
N
9/9
3SB35 00-2Q
EAR99
N
9/52
3SB24 04-0
N
N
9/9
3SB35 00-2S
EAR99
N
9/53
3SB24 04-3
N
N
9/9
3SB35 00-2T
EAR99
N
9/54
3SB24 5
N
N
9/10
3SB35 00-2U
EAR99
N
9/54
3SB29 01
N
N
9/11 ... 15
3SB35 00-2V
EAR99
N
9/54
3SB29 02
N
N
9/15, 9/17
3SB35 00-3A
N
N
9/55
3SB29 08-0
N
N
9/9 ... 10
3SB35 00-3B
N
N
9/55
3SB29 08-1
N
N
9/16, 9/77
3SB35 00-3D
N
N
9/56
3SB29 08-2
N
N
9/16 ... 17, 9/77
3SB35 00-3E
N
N
9/56
3SB29 08-3
N
N
9/17
3SB35 00-3G
N
N
9/56
3SB29 08-8AA
N
N
9/17
3SB35 00-3P
EAR99
N
9/51
3SB29 08-8AB
N
N
9/17
3SB35 00-3Q
EAR99
N
9/52
3SB29 08-8AD
EAR99
N
9/17
3SB35 00-3S
EAR99
N
9/53
3SB29 08-8AE
N
N
9/17
3SB35 00-3T
EAR99
N
9/54
3SB29 1
N
N
9/16
3SB35 00-3U
EAR99
N
9/54
3SB30 00-0AA
N
N
9/30
3SB35 00-3V
EAR99
N
9/54
3SB30 00-0AB
N
N
9/30
3SB35 00-4
N
N
9/55 ... 56
3SB30 00-0AC
on req.
9/30
3SB35 00-5
N
N
9/55 ... 56
3SB30 00-0B
N
N
9/30
3SB35 01-0
N
N
9/49
3SB30 00-0C
N
N
9/30
3SB35 01-1
N
N
9/50
3SB30 00-0D
N
N
9/30
3SB35 01-2D
N
N
9/53
Siemens LV 1 · 2008
20
Order No.
20/53
LV1_20.book Seite 54 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3SB35 01-2E
N
N
9/53
3SB38 01-2EA30
N
N
9/85
3SB35 01-2F
N
N
9/54
3SB38 01-2EB
N
N
9/85
3SB35 01-2G
N
N
9/54
3SB38 01-2EC
N
N
9/86
3SB35 01-2K
N
N
9/51
3SB38 01-2EF
N
N
9/85
3SB35 01-2L
N
N
9/52
3SB38 01-2EG
N
N
9/85
3SB35 01-2P
EAR99
N
9/51
3SB38 01-3
on req.
3SB35 01-2Q
EAR99
N
9/52
3SB38 02-0AA
N
3SB35 01-2S
EAR99
N
9/53
3SB38 02-0AZ
on req.
3SB35 01-2T
EAR99
N
9/54
3SB38 02-0D
N
3SB35 01-3
EAR99
N
9/51 ... 54
3SB38 02-1
on req.
3SB35 01-6
N
N
9/58
3SB38 02-2AA
N
3SB36 01-0
N
N
9/44 ... 45
3SB38 02-2AZ
on req.
3SB36 01-1
N
N
9/46
3SB38 02-2D
N
3SB36 01-2K
N
N
9/47
3SB38 02-3
on req.
3SB36 01-2P
EAR99
N
9/47
3SB38 03-0AA
N
3SB36 01-4
N
N
9/47
3SB38 03-0AZ
on req.
3SB36 02-0
N
N
9/44 ... 45
3SB38 03-0D
N
3SB36 02-2K
N
N
9/47
3SB38 03-1
on req.
3SB36 02-2P
EAR99
N
9/47
3SB38 03-2AA
N
3SB36 02-4
N
N
9/47
3SB38 03-2AZ
on req.
3SB36 03
N
N
9/44 ... 46
3SB38 03-2D
N
3SB36 04
N
N
9/48
3SB38 03-3
on req.
3SB36 05-0AA0
--
9/44
3SB38 04-0AA
N
3SB36 05-0AA2
N
N
9/44 ... 45
3SB38 04-0AZ
on req.
3SB36 05-0AA3
N
N
9/44 ... 45
3SB38 04-1
on req.
3SB36 05-0AA4
N
N
9/44 ... 45
3SB38 04-2AA
N
3SB36 05-0AA5
N
N
9/44 ... 45
3SB38 04-2AZ
on req.
3SB36 05-0AA6
N
N
9/44 ... 45
3SB38 04-3
on req.
3SB36 05-0AA7
N
N
9/44 ... 45
3SB38 06-0AA
N
3SB36 06
N
N
9/44 ... 45
3SB38 06-0AZ
on req.
3SB36 07
N
N
9/44 ... 45
3SB38 06-1
on req.
3SB36 08-2D
N
N
9/47
3SB38 06-2AA
N
3SB36 08-2E
N
N
9/47
3SB38 06-2AZ
on req.
3SB36 08-2S
EAR99
N
9/47
3SB38 06-3
on req.
3SB36 08-2T
EAR99
N
9/47
3SB38 6
N
3SB36 10-2D
N
N
9/47
3SB38 8
on req.
3SB36 10-2E
N
N
9/47
3SB39 01-0A
N
N
3SB36 10-2S
EAR99
N
9/47
9/62, 9/81 ... 82, 9/88 ... 89, 9/93,
9/97
3SB36 10-2T
EAR99
N
9/47
3SB39 01-0CB
EAR99
N
9/82
3SB39 01-0CG
N
N
9/82
3SB39 01-0CH
N
N
9/80
3SB39 01-0CK
N
N
9/93
3SB39 01-0CL
N
N
9/93
3SB39 01-0CM
N
N
9/93
3SB39 01-0CN
N
N
9/93
3SB39 01-0CP
N
N
9/93
3SB39 01-0CQ
EAR99
N
9/93
3SB39 01-0CS
N
N
9/93
3SB39 01-0CT
N
N
9/93
3SB39 01-0CU
N
N
9/93
3SB39 01-1
N
N
9/16, 9/76 ... 77
3SB39 01-2
N
N
9/66
3SB39 02
N
N
9/66, 9/70
3SB39 03
N
N
9/66, 9/72
3SB39 05
N
N
9/66, 9/73
3SB36 11
N
3SB36 4
N
3SB36 5
N
3SB38 01-0AA
3SB38 01-0AB
3SB38 01-0AD
3SB38 01-0AZ
3SB38 01-0D
N
N
N
N
N
N
N
N
on req.
N
3SB38 01-1
3SB38 01-2AB
3SB38 01-2AD
3SB38 01-2AZ
3SB38 01-2D
N
N
N
N
N
3SB38 01-2EA3
9/44 ... 45, 9/48
9/44 ... 45, 9/48
9/86
9/86
9/86
9/84
9/84
9/87
N
N
N
on req.
N
9/46
9/87
on req.
3SB38 01-2AA
20/54
N
N
3SB38 01-0E
20
Page
9/86
9/86
9/86
9/87
N
on req.
Siemens LV 1 · 2008
9/85
9/86
9/87
N
9/86
9/87
N
9/84
9/87
N
9/86
9/87
N
9/85
9/87
N
9/86
9/87
N
9/84
9/87
N
9/86
9/87
N
9/85
9/87
N
9/86
9/87
9/87
N
9/86
9/87
9/87
N
9/86
9/87
9/87
N
9/86
9/87
9/87
N
9/97
9/87
LV1_20.book Seite 55 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3SB39 06
N
N
9/66, 9/90
3SE29
N
N
9/103
3SB39 1
N
N
9/77
3SE30
N
N
8/41
3SB39 2
N
N
9/37, 9/71 ... 73, 9/78 ... 82, 9/93
3SE31
N
N
8/39
3SB39 30-0C
N
N
9/75
3SE39
N
N
9/103
3SB39 30-0D
N
N
9/75
3SE50 00-0AA
N
N
3SB39 30-0EA1
N
N
9/75
8/11, 8/15, 8/25, 8/29, 8/62, 8/66,
8/68
3SB39 30-0EA2
N
N
9/75
3SE50 00-0AC
EAR99
N
8/25, 8/29, 8/61, 8/68
3SE50 00-0AD02
EAR99
N
8/25, 8/29, 8/61, 8/68
3SE50 00-0AD03
N
N
8/11, 8/15, 8/66
3SE50 00-0AD04
N
N
8/11, 8/15, 8/66
3SE50 00-0AD1
N
N
8/11, 8/15, 8/66
3SE50 00-0AE
N
N
8/11, 8/15, 8/25, 8/29, 8/61, 8/66,
8/68
3SE50 00-0AF
N
N
8/11, 8/15, 8/25, 8/29, 8/61, 8/66,
8/68
3SB39 30-0EA3
3SB39 30-0EA4
3SB39 30-0EA5
3SB39 30-0EA6
EAR99
N
N
N
N
N
N
N
9/75
9/75
9/75
9/75
N
N
9/75
3SB39 30-0F
N
N
9/75
3SB39 30-0G
N
N
9/75
3SB39 30-0H
N
N
9/75
3SE50 00-0AH
N
N
8/25, 8/29, 8/62, 8/68
3SB39 30-6
N
N
9/75
3SE50 00-0AK
N
N
8/11, 8/15, 8/66
3SB39 31
N
N
9/81, 9/93
3SE50 00-0AR
N
N
8/11, 8/15, 8/25, 8/29, 8/61
3SB39 4
N
N
9/68, 9/71 ... 72, 9/78 ... 80, 9/82
3SE50 00-0AT
N
N
8/25, 8/29, 8/62, 8/68
3SB39 5
N
N
9/75, 9/81
3SE50 00-0AU
N
N
8/57 ... 58, 8/75 ... 76
3SE21
N
N
8/30 ... 32, 8/36
3SE50 00-0AV
N
N
8/48, 8/54, 8/70 ... 71, 8/73 ... 74
N
N
8/43
3SE22 0
N
N
8/16
3SE50 00-0B
3SE22 10-3C
N
N
8/17
3SE50 00-0C
N
N
8/43
3SE22 10-3D
N
N
8/17
3SE50 00-0G
N
N
8/43
3SE22 10-3E
N
N
8/17
3SE50 00-0K
N
N
8/43
3SE22 10-3F
N
N
8/17
3SE50 00-0L
N
N
8/43
3SE22 10-3G
N
N
8/17
3SE50 00-0N
N
N
8/43
3SE22 10-3L
EAR99
N
8/17
3SE51 10
N
N
8/43
3SE22 10-3M
EAR99
N
8/17
3SE51 12-0BA
N
N
8/24, 8/61
3SE22 10-3S
N
N
8/17
3SE51 12-0BC
N
N
8/22
3SE22 10-3U
N
N
8/17
3SE51 12-0BD
EAR99
N
8/22
N
N
8/22
3SE22 10-3V
N
N
8/17
3SE51 12-0BE
3SE22 10-3W
N
N
8/17
3SE51 12-0BF
N
N
8/22
3SE22 30-0
N
N
8/19 ... 20
3SE51 12-0BH
N
N
8/23
3SE22 30-1
N
N
8/19 ... 20
3SE51 12-0CA
N
N
8/24, 8/61
3SE22 30-3
N
N
8/19 ... 20
3SE51 12-0CC
N
N
8/22, 8/60
3SE22 30-6
N
N
8/19 ... 20
3SE51 12-0CD02
EAR99
N
8/22
3SE22 30-7A
N
N
8/20
3SE51 12-0CD02-1
N
N
8/60
3SE22 30-7C
N
N
8/19
3SE51 12-0CE
N
N
8/22, 8/60
3SE22 30-7D
N
N
8/19
3SE51 12-0CF
N
N
8/22, 8/60
3SE22 30-7E
N
N
8/19
3SE51 12-0CH
N
N
8/23, 8/60
N
N
8/22, 8/60
3SE22 30-7F
N
N
8/19
3SE51 12-0CR
3SE22 30-7G
N
N
8/20
3SE51 12-0CT
N
N
8/23, 8/60
3SE22 30-7U
N
N
8/20
3SE51 12-0KA
N
N
8/24, 8/61
3SE22 30-7V
EAR99
N
8/20
3SE51 12-0KC
N
N
8/22
3SE22 30-7W
N
N
8/20
3SE51 12-0KD
EAR99
N
8/22
3SE22 30-8
N
N
8/19 ... 20
3SE51 12-0KE
N
N
8/22
3SE22 4
N
N
8/49
3SE51 12-0KH
N
N
8/23
3SE22 5
N
N
8/49
3SE51 12-0LA
N
N
8/24, 8/61
3SE22 83-0
N
N
8/59
3SE51 12-0LC
N
N
8/22
3SE22 83-6GA43
N
N
8/59
3SE51 12-0LD
EAR99
N
8/22
N
N
8/22
3SE22 83-6GA44
on req.
8/59
3SE51 12-0LE
3SE22 83-6GA5
N
N
8/59
3SE51 12-0LF
N
N
8/22
3SE23
EAR99
N
8/33 ... 34, 8/36
3SE51 12-0LH
N
N
8/23
3SE24
N
N
8/35 ... 36
3SE51 12-0LU
N
N
8/58, 8/63
3SE28
N
N
8/55
3SE51 12-0Q
N
N
8/47, 8/63
Siemens LV 1 · 2008
20
3SB39 30-0EA7
20/55
LV1_20.book Seite 56 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
Page
ECCN
AL
ECCN
AL
3SE51 12-1
N
N
8/24, 8/47
3TC44 17-0L
N
N
3/65
3SE51 12-3
N
N
8/24, 8/47
3TC48 17-0A
N
N
3/67
3SE51 14
N
N
8/22 ... 24, 8/47
3TC48 17-0B
N
N
3/67
3SE51 15
N
N
8/24, 8/47
3TC48 17-0L
N
N
3/65
3SE51 20
N
N
8/43
3TC52 17-0A
N
N
3/67
3SE51 22-0B
N
N
8/26 ... 28, 8/61
3TC52 17-0B
N
N
3/67
3SE51 22-0C
N
N
8/26 ... 28, 8/60 ... 61
3TC52 17-0L
N
N
3/65
3SE51 22-0KA
N
N
8/28, 8/61
3TC56 17-0A
N
N
3/67
3SE51 22-0KC
N
N
8/26
3TC56 17-0B
N
N
3/67
3SE51 22-0KD
EAR99
N
8/26
3TC56 17-0L
N
N
3/65
3SE51 22-0KE
N
N
8/26
3TC74 14-0
N
N
3/68
3SE51 22-0KH
N
N
8/27
3TC74 14-1
N
N
3/68
3SE51 22-0LA
N
N
8/28, 8/61
3TC78 14-0
N
N
3/68
3SE51 22-0LC
N
N
8/26
3TC78 14-1
N
N
3/68
3SE51 22-0LD
EAR99
N
8/26
3TD
N
N
3/48
3SE51 22-0LE
N
N
8/26
3TE
N
N
3/49
3SE51 22-0LH
N
N
8/27
3TF20 01-0A
N
N
3/30
3SE51 22-0Q
N
N
8/47, 8/63
3TF20 01-0B
N
N
3/30
3SE51 22-1
N
N
8/28, 8/47
3TF20 01-3A
N
N
3/30
3SE51 22-3
N
N
8/28, 8/47
3TF20 01-3B
N
N
3/30
3SE52 30
N
N
8/43
3TF20 01-6A
N
N
3/30
3SE52 32
N
N
8/8 ... 10, 8/46, 8/57
3TF20 01-6B
N
N
3/30
3SE52 34
N
N
8/8 ... 10, 8/46
3TF20 01-7A
N
N
3/30
3SE52 40
N
N
8/43
3TF20 01-7B
N
N
3/30
3SE52 42
N
N
8/12 ... 14, 8/46
3TF20 10-0A
N
N
3/30
3SE52 50-0A
N
N
8/40
3TF20 10-0B
N
N
3/30
3SE52 50-0B
N
N
8/40
3TF20 10-3A
N
N
3/30
3SE52 50-0C
N
N
8/40
3TF20 10-3B
N
N
3/30
3SE52 50-0K
N
N
8/40
3TF20 10-6A
N
N
3/30
3SE52 50-0L
N
N
8/40
3TF20 10-6B
N
N
3/30
3SE53
N
N
8/52 ... 53
3TF20 10-7A
N
N
3/30
3SE6
N
N
8/86
3TF20 10-7B
N
N
3/30
3SE7
N
N
9/98 ... 100
3TF22 11-0A
N
N
3/31
3SF11
N
N
8/67, 8/71, 8/76
3TF22 11-0B
N
N
3/31
3SF12
N
N
8/65, 8/70, 8/75
3TF22 22-0A
N
N
3/31
3SF13 14-1SB
N
N
8/74
3TF22 22-0B
N
N
3/31
3SF13 14-1SD
N
N
8/74
3TF28 01-0A
N
N
3/30
3SF13 14-1SE
EAR99
N
8/74
3TF28 01-0B
N
N
3/30
3SF13 14-1SF
N
N
8/74
3TF28 10-0A
N
N
3/30
3SF13 14-1SG
N
N
8/74
3TF28 10-0B
N
N
3/30
3SF13 14-1SJ
N
N
8/74
3TF29 11-0A
N
N
3/31
3SF13 2
N
N
8/73
3TF29 11-0B
N
N
3/31
3SF2
N
N
9/101
3TF29 22-0A
N
N
3/31
3SF5
N
N
9/63, 9/95 ... 96
3TF29 22-0B
N
N
3/31
3SF6
N
N
6/102
3TF68 33-1D
N
N
3/27
3SF7
N
N
6/102
3TF68 33-1Q
N
N
3/27
3SR
N
N
9/76
3TF68 33-8D
N
N
3/27
3SX1
N
N
5/50, 5/56, 6/16, 9/76, 9/82
3TF68 33-8Q
N
N
3/27
3SX3
N
N
8/18, 8/21, 8/37 ... 38, 8/49, 8/55,
8/59, 8/86, 9/99
3TF68 4
N
N
3/27
3TF69 33-1D
N
N
3/27
3TF69 33-1Q
N
N
3/27
3TF69 33-8D
N
N
3/27
3TF69 33-8Q
N
N
3/27
3TF69 4
N
N
3/27
3TG10 01-0A
N
N
3/96
3SX9
N
N
8/42, 8/48, 8/54
3SY
N
N
8/38, 8/41 ... 42, 8/48, 8/54, 9/77
3T
20
Export
markings
3TB
N
N
3/29, 3/64
3TC44 17-0A
N
N
3/67
3TC44 17-0B
N
N
3/67
20/56
Siemens LV 1 · 2008
LV1_20.book Seite 57 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3TG10 01-0B
N
N
3/96
3TH42 62-0L
N
N
3/60
3TG10 01-1A
N
N
3/96
3TH42 71-0A
N
N
3/73
3TG10 01-1B
N
N
3/96
3TH42 71-0B
N
N
3/73
3TG10 10-0A
N
N
3/96
3TH42 80-0A
N
N
3/73
3TG10 10-0B
N
N
3/96
3TH42 80-0B
N
N
3/73
3TG10 10-1A
N
N
3/96
3TH42 93-0A
N
N
3/73
3TG10 10-1B
N
N
3/96
3TH42 93-0B
N
N
3/73
3TH20 22-0A
N
N
3/76
3TH43 10-0A
N
N
3/74
3TH20 22-0B
N
N
3/76
3TH43 10-0B
N
N
3/74
3TH20 22-3A
N
N
3/76
3TH43 46-0A
N
N
3/74
3TH20 22-3B
N
N
3/76
3TH43 46-0B
N
N
3/74
3TH20 22-6A
N
N
3/76
3TH43 55-0A
N
N
3/74
3TH20 22-6B
N
N
3/76
3TH43 55-0B
N
N
3/74
3TH20 22-7A
N
N
3/76
3TH43 64-0A
N
N
3/74
3TH20 22-7B
N
N
3/76
3TH43 64-0B
N
N
3/74
3TH20 31-0A
N
N
3/76
3TH43 73-0A
N
N
3/74
3TH20 31-0B
N
N
3/76
3TH43 73-0B
N
N
3/74
3TH20 31-3A
N
N
3/76
3TH43 82-0A
N
N
3/74
3TH20 31-3B
N
N
3/76
3TH43 82-0B
N
N
3/74
3TH20 31-6A
N
N
3/76
3TH43 91-0A
N
N
3/74
3TH20 31-6B
N
N
3/76
3TH43 91-0B
N
N
3/74
3TH20 31-7A
N
N
3/76
3TH43 94-0A
N
N
3/74
3TH20 31-7B
N
N
3/76
3TH43 94-0B
N
N
3/74
3TH20 40-0A
N
N
3/76
3TK10
N
N
3/54
3TH20 40-0B
N
N
3/76
3TK11
N
N
3/54
3TH20 40-3A
N
N
3/76
3TK12
N
N
3/54
3TH20 40-3B
N
N
3/76
3TK13
N
N
3/54
3TH20 40-6A
N
N
3/76
3TK14
N
N
3/54
3TH20 40-6B
N
N
3/76
3TK15
N
N
3/54
3TH20 40-7A
N
N
3/76
3TK17
N
N
3/54
3TH20 40-7B
N
N
3/76
3TK19 1
N
N
3/130
3TH22 44-0A
N
N
3/76
3TK19 2
N
N
3/130
3TH22 44-0B
N
N
3/76
3TK19 3
N
N
3/130
3TH22 53-0A
N
N
3/76
3TK19 4
N
N
3/130
3TH22 53-0B
N
N
3/76
3TK19 5
N
N
3/130
3TH22 62-0A
N
N
3/76
3TK19 6
N
N
3/130
3TH22 62-0B
N
N
3/76
3TK19 7
on req.
3TH22 71-0A
N
N
3/76
3TK20 22-0A
N
N
3/55
3TH22 71-0B
N
N
3/76
3TK20 22-0B
N
N
3/55
3TH22 80-0A
N
N
3/76
3TK20 22-3A
N
N
3/55
3TH22 80-0B
N
N
3/76
3TK20 22-3B
N
N
3/55
3TH27 22-0A
N
N
3/77
3TK20 22-6A
N
N
3/55
3TH27 22-0B
N
N
3/77
3TK20 22-6B
N
N
3/55
3TH27 31-0A
N
N
3/77
3TK20 22-7A
N
N
3/55
3TH27 31-0B
N
N
3/77
3TK20 22-7B
N
N
3/55
3TH27 40-0A
N
N
3/77
3TK20 31-0A
N
N
3/55
3TH27 40-0B
N
N
3/77
3TK20 31-0B
N
N
3/55
3TH42 44-0A
N
N
3/73
3TK20 31-3A
N
N
3/55
3TH42 44-0B
N
N
3/73
3TK20 31-3B
N
N
3/55
3TH42 44-0L
N
N
3/60
3TK20 31-6A
N
N
3/55
3TH42 53-0A
N
N
3/73
3TK20 31-6B
N
N
3/55
3TH42 53-0B
N
N
3/73
3TK20 31-7A
N
N
3/55
3TH42 53-0L
N
N
3/60
3TK20 31-7B
N
N
3/55
3TH42 62-0A
N
N
3/73
3TK20 40-0A
N
N
3/55
3TH42 62-0B
N
N
3/73
3TK20 40-0B
N
N
3/55
3/130
Siemens LV 1 · 2008
20
Order No.
20/57
LV1_20.book Seite 58 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
20
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3TK20 40-3A
N
N
3/55
3TY27 40
N
N
3/129
3TK20 40-3B
N
N
3/55
3TY27 41
N
N
3/129
3TK20 40-6A
N
N
3/55
3TY27 42
N
N
3/129
3TK20 40-6B
N
N
3/55
3TY27 8
N
N
3/129
3TK20 40-7A
N
N
3/55
3TY64 43-0B
on req.
3TK20 40-7B
N
N
3/55
3TY64 43-0L
N
3TK28 1
N
N
7/88
3TY64 83-0A
on req.
3TK28 21
N
N
7/82 ... 83
3TY64 83-0B
on req.
3TK28 22
N
N
7/82 ... 83
3TY64 83-0L
N
N
3/121
3TK28 23
N
N
7/82 ... 83
3TY65 00
N
N
3/127
3TK28 24
N
N
7/82 ... 83
3TY65 01
N
N
3/127 ... 128
3TK28 25
N
N
7/82 ... 83
3TY65 02
N
N
3/127
3TK28 26-0
N
N
7/84
3TY65 03-0B
on req.
3TK28 26-1
N
N
7/82
3TY65 03-0L
N
N
3/121
3TK28 26-2
N
N
7/83
3TY65 20
N
N
3/127
3TK28 27
N
N
7/82 ... 83
3TY65 22
N
N
3/127
3TK28 28
N
N
7/82 ... 83
3TY65 23-0A
on req.
3TK28 3
N
N
7/82 ... 83
3TY65 23-0B
on req.
3TK28 40
N
N
7/77 ... 78
3TY65 23-0L
N
N
3/121
3TK28 41
N
N
7/77 ... 78
3TY65 40
N
N
3/127
3TK28 42
N
N
7/77 ... 78
3TY65 42
N
N
3/127
3TK28 45
N
N
7/77 ... 78
3TY65 43-0B
on req.
3TK28 5
N
N
7/86
3TY65 43-0L
N
N
3/121
3TX2
N
N
3/129
3TY65 60
N
N
3/127
3TX40
N
N
3/124
3TY65 61
N
N
3/127 ... 128
3TX41
N
N
3/124
3TY65 62
N
N
3/127
3TX42
N
N
3/124, 9/80
3TY65 63-0B
on req.
3TX44 0
N
N
3/121, 3/125
3TY65 63-0L
N
3TX44 1
N
N
3/121, 3/125
3TY65 66
on req.
3TX44 2
N
N
3/121, 3/125
3TY74
on req.
3TX44 3
N
N
3/121, 3/125
3TY75
N
N
3/120, 3/129
3TX44 4
N
N
3/121, 3/125
3TY76 80
N
N
3/129
3TX44 90
N
N
3/121 ... 122, 3/125 ... 126
3TY76 81
N
N
3/129
3TX44 91-2A
EAR99
N
3/122, 3/126
3TY76 83-0C
on req.
3TX44 91-2K
N
N
3/122
3TY76 83-0D
on req.
3TX47
N
N
3/125, 16/40 ... 41
3TY76 83-0Q
N
N
3/130
3TX6
N
N
3/120, 17/68, 19/111
3TY76 84
N
N
3/130
3TX70 0
N
N
3/82 ... 83, 3/86 ... 87, 3/92, 3/94
3TY76 90
N
N
3/129
3TX70 1
N
N
3/84 ... 85
3TY76 93-0C
on req.
3TX70 9
N
N
3/120
3TY76 93-0D
on req.
3TX74
N
N
3/119, 3/124, 6/10, 7/19
3TY76 93-0Q
N
N
3/130
3TX75
N
N
3/112, 3/119 ... 120,
7/18 ... 19
3U
3UF18
N
N
7/19
3TX76 80-0D
N
N
3/120
3UF19 00-1D
N
N
7/18
3TX76 80-0E
N
N
3/120
3UF19 00-1E
N
N
7/18
3TX76 86
N
N
3/120, 7/18 ... 19
3UF19 00-1K
N
N
7/18
3TX76 9
N
N
3/120, 7/18 ... 19
3UF19 00-1M
EAR99
N
7/18
3TY24 40
N
N
3/128
3UF19 00-1N
N
N
7/18
3TY24 42
N
N
3/121, 3/128
3UF19 00-1P
N
N
7/18
3TY24 80
N
N
3/128
3UF50
on req.
3TY24 82
N
N
3/128
3UF51
N
N
7/16
3TY25 20
N
N
3/128
3UF52
N
N
7/16
3TY25 22
N
N
3/128
3UF57 00-0AA00-0
EAR99
N
7/17
3TY25 60
N
N
3/128
3UF57 00-0AA00-1
N
N
7/17
3TY25 62
N
N
3/128
3UF57 1
5D992B1 N
7/17
20/58
Siemens LV 1 · 2008
3/128
N
3/121
3/128
3/128
3/127
3/128
3/127 ... 128
3/127
3/127 ... 128
N
3/121
3/128
3/128
3/129
3/129
3/129
3/129
7/16
LV1_20.book Seite 59 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
Export
markings
ECCN
AL
3UF57 2
EAR99S
N
7/17
3VL27 06-2.
on req.
3UF59
N
N
7/18
3VL27 06-2A
EAR99
N
16/11
3UF70
N
N
7/8, 16/74
3VL27 06-2B
EAR99
N
16/29
3UF71 00
N
N
7/8
3VL27 06-2D
EAR99
N
16/9, 16/13
3UF71 01
N
N
7/8
3VL27 06-2E
EAR99
N
16/23, 16/27
3UF71 02
N
N
7/8
3VL27 06-3.
on req.
3UF71 03-1A
N
N
7/8
3VL27 06-3A
EAR99
N
16/11
3UF71 03-1B
N
N
7/8, 16/74
3VL27 06-3B
EAR99
N
16/29
3UF71 04
N
N
7/8, 16/74
3VL27 06-3D
EAR99
N
16/9, 16/13
3UF71 10
N
N
7/9
3VL27 06-3E
EAR99
N
16/23, 16/27
3UF71 11
N
N
7/9
3VL27 08
EAR99
N
16/8 ... 9, 16/22 ... 23, 16/26 ... 27
3UF71 12
N
N
7/9
3VL27 10-1.
on req.
3UF71 13-1A
EAR99
N
7/9
3VL27 10-1A
EAR99
N
16/10
3UF71 13-1B
EAR99
N
7/9
3VL27 10-1B
EAR99
N
16/28
3UF71 14
EAR99
N
7/9
3VL27 10-1D
EAR99
N
16/8, 16/12
3UF71 5
N
N
7/9
3VL27 10-1E
EAR99
N
16/22, 16/26, 16/28
3UF72
N
N
7/9
3VL27 10-2.
on req.
3UF73
N
N
7/10
3VL27 10-2A
EAR99
N
16/11
3UF74
N
N
7/10
3VL27 10-2B
EAR99
N
16/29
3UF75
N
N
7/10
3VL27 10-2D
EAR99
N
16/9, 16/13
3UF77
N
N
7/10
3VL27 10-2E
EAR99
N
16/23, 16/27, 16/29
3UF79 0
N
N
7/11
3VL27 10-3.
on req.
3UF79 1
N
N
7/11
3VL27 10-3A
EAR99
N
16/11
3UF79 2
N
N
7/11 ... 12
3VL27 10-3B
EAR99
N
16/29
3UF79 3
N
N
6/26, 7/11, 16/74
3VL27 10-3D
EAR99
N
16/9, 16/13
3UF79 4
N
N
1/6, 1/8, 6/26, 7/11, 16/74
3VL27 10-3E
EAR99
N
16/23, 16/27, 16/29
3UF79 5
N
N
7/11
3VL27 12
EAR99
N
16/8 ... 9, 16/22 ... 23, 16/26 ... 27
3UF79 7
N
N
7/12, 16/74
3VL27 16-1.
on req.
3UF79 82-0AA00
EAR99
N
7/13
3VL27 16-1A
EAR99
N
16/10, 16/19, 16/35
3UF79 82-0AA01
N
N
7/13
3VL27 16-1B
EAR99
N
16/28
3UF79 82-0AA02
N
N
7/13
3VL27 16-1D
EAR99
N
16/8, 16/12
3UF79 82-0AA1
EAR99S
N
7/13
3VL27 16-1E
EAR99
N
16/22, 16/26, 16/28
3UG30
N
N
7/56 ... 57
3VL27 16-2.
on req.
3UG32
N
N
7/56 ... 57, 7/60
3VL27 16-2A
EAR99
N
16/11, 16/19, 16/35
3UG4
N
N
7/44 ... 45, 7/48, 7/50, 7/52 ... 53,
7/58, 7/61
3VL27 16-2B
EAR99
N
16/29
3VL27 16-2D
EAR99
N
16/9, 16/13
3VL27 16-2E
EAR99
N
16/23, 16/27, 16/29
3VL27 16-3.
on req.
3VL27 16-3A
EAR99
N
16/11, 16/19, 16/35
3VL27 16-3B
EAR99
N
16/29
3VL27 16-3D
EAR99
N
16/9, 16/13
3VL27 16-3E
EAR99
N
16/23, 16/27, 16/29
3VL37 20-1.
on req.
3VL37 20-1A
EAR99
N
16/10
3VL37 20-1B
EAR99
N
16/28
3VL37 20-1D
EAR99
N
16/8
3VL37 20-1E
EAR99
N
16/22, 16/26
N
N
7/55
3V
AL
16/15, 16/17, 16/31, 16/33
16/15, 16/17, 16/31, 16/33
16/14, 16/16, 16/30, 16/32
16/15, 16/17, 16/31, 16/33
16/15, 16/17, 16/31, 16/33
16/14, 16/16, 16/30, 16/32
16/15, 16/17, 16/31, 16/33
16/15, 16/17, 16/31, 16/33
3VF2
EAR99
N
16/75
3VF92 20
N
N
16/76
3VF92 21
EAR99
N
16/76
3VF92 22
EAR99
N
16/76
3VF92 23
EAR99
N
16/76
3VF92 24-1L
N
N
16/76
3VF92 24-1N
N
N
16/76
3VL17 0
EAR99
N
16/8 ... 9, 16/22 ... 25
3VL17 1
EAR99
N
16/8 ... 9, 16/12 ... 13, 16/22 ... 25,
16/28 ... 29
3VL17 2
EAR99
N
16/8 ... 9, 16/22 ... 25
3VL37 20-2.
on req.
3VL17 9
EAR99
N
16/8 ... 9, 16/22 ... 25
3VL37 20-2A
EAR99
N
16/11
3VL27 05
EAR99
N
16/8 ... 9, 16/22 ... 23, 16/26 ... 27
3VL37 20-2B
EAR99
N
16/29
3VL27 06-1.
on req.
16/14, 16/16, 16/30, 16/32
3VL37 20-2D
EAR99
N
16/9
3VL27 06-1A
EAR99
16/10
3VL37 20-2E
EAR99
N
16/23, 16/27
16/28
3VL37 20-3.
on req.
16/8, 16/12
3VL37 20-3A
EAR99
N
16/11
16/22, 16/26
3VL37 20-3B
EAR99
N
16/29
3VL27 06-1B
3VL27 06-1D
3VL27 06-1E
EAR99
EAR99
EAR99
N
N
N
N
16/14, 16/16, 16/30, 16/32
16/15, 16/17, 16/31, 16/33
16/15, 16/17, 16/31, 16/33
Siemens LV 1 · 2008
20
3UL
ECCN
Page
20/59
LV1_20.book Seite 60 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3VL37 20-3D
EAR99
N
16/9
3VL57 50-1E
EAR99
N
3VL37 20-3E
EAR99
N
16/23, 16/27
3VL57 50-2.
on req.
3VL37 25-1.
on req.
16/14, 16/16, 16/30, 16/32
3VL57 50-2A
EAR99
N
16/11
3VL37 25-1A
EAR99
N
16/10, 16/19, 16/35
3VL57 50-2DC
EAR99
N
16/9
3VL37 25-1B
EAR99
N
16/28
3VL57 50-2DK
N
N
16/13
3VL37 25-1D
EAR99
N
16/8, 16/12
3VL57 50-2E
EAR99
N
16/23, 16/27
3VL37 25-1E
EAR99
N
16/22, 16/26, 16/28
3VL57 50-3.
on req.
3VL37 25-2.
on req.
16/15, 16/17, 16/31, 16/33
3VL57 50-3A
EAR99
N
16/11
3VL37 25-2A
EAR99
N
16/11, 16/19, 16/35
3VL57 50-3DC
EAR99
N
16/9
3VL37 25-2B
EAR99
N
16/29
3VL57 50-3DK
N
N
16/13
3VL37 25-2D
EAR99
N
16/9, 16/13
3VL57 50-3E
EAR99
N
16/23, 16/27
3VL37 25-2E
EAR99
N
16/23, 16/27, 16/29
3VL57 63-1.
on req.
3VL37 25-3.
on req.
16/15, 16/17, 16/31, 16/33
3VL57 63-1A
EAR99
N
16/10, 16/19, 16/35
3VL37 25-3A
EAR99
N
16/11, 16/19, 16/35
3VL57 63-1B
EAR99
N
16/28
3VL37 25-3B
EAR99
N
16/29
3VL57 63-1D
EAR99
N
16/8, 16/12
3VL37 25-3D
EAR99
N
16/9, 16/13
3VL57 63-1E
EAR99
N
16/22, 16/26, 16/28
3VL37 25-3E
EAR99
N
16/23, 16/27, 16/29
3VL57 63-2.
on req.
3VL47 2
EAR99
N
16/8 ... 9, 16/12 ... 13, 16/22 ... 23,
16/26 ... 27
3VL57 63-2A
EAR99
N
16/11, 16/19, 16/35
3VL57 63-2B
EAR99
N
16/29
3VL57 63-2D
EAR99
N
16/9, 16/13
3VL57 63-2E
EAR99
N
16/23, 16/27, 16/29
3VL57 63-3.
on req.
3VL57 63-3A
EAR99
N
16/11, 16/19, 16/35
3VL57 63-3B
EAR99
N
16/29
3VL57 63-3D
EAR99
N
16/9, 16/13
3VL57 63-3E
EAR99
N
16/23, 16/27, 16/29
3VL67 80-1.
on req.
3VL67 80-1A
EAR99
N
16/10, 16/19, 16/35
3VL67 80-1B
EAR99
N
16/28
3VL67 80-1D
EAR99
N
16/12
3VL67 80-1E
EAR99
N
16/28
3VL67 80-2.
on req.
3VL67 80-2A
EAR99
N
16/11, 16/19, 16/35
3VL67 80-2B
EAR99
N
16/29
3VL67 80-2D
EAR99
N
16/13
3VL67 80-2E
EAR99
N
16/29
3VL67 80-3.
on req.
3VL67 80-3A
EAR99
N
16/11, 16/19, 16/35
3VL67 80-3B
EAR99
N
16/29
3VL67 80-3D
EAR99
N
16/13
3VL67 80-3E
EAR99
N
16/29
3VL77 10-1.
on req.
3VL77 10-1A
EAR99
N
16/10
3VL77 10-1B
EAR99
N
16/28
3VL77 10-2.
on req.
3VL77 10-2A
EAR99
N
16/11
3VL77 10-2B
EAR99
N
16/29
3VL77 10-3.
on req.
3VL77 10-3A
EAR99
N
16/11
N
16/29
16/15, 16/17
16/15, 16/17
16/14, 16/16, 16/30, 16/32
16/15, 16/17, 16/31, 16/33
on req.
3VL47 31-1A
EAR99
N
16/10
3VL47 31-1B
EAR99
N
16/28
3VL47 31-1D
EAR99
N
16/8, 16/12
3VL47 31-1E
EAR99
N
16/22, 16/26
3VL47 31-2.
on req.
3VL47 31-2A
EAR99
N
16/11
3VL47 31-2B
EAR99
N
16/29
3VL47 31-2D
EAR99
N
16/9, 16/13
3VL47 31-2E
EAR99
N
16/23, 16/27
3VL47 31-3.
on req.
3VL47 31-3A
EAR99
N
16/11
3VL47 31-3B
EAR99
N
16/29
3VL47 31-3D
EAR99
N
16/9, 16/13
3VL47 31-3E
EAR99
N
16/23, 16/27
3VL47 40-1.
on req.
3VL47 40-1A
EAR99
N
16/10, 16/19, 16/35
3VL47 40-1B
EAR99
N
16/28
3VL47 40-1D
EAR99
N
16/8, 16/12
3VL47 40-1E
EAR99
N
16/22, 16/26, 16/28
3VL47 40-2.
on req.
3VL47 40-2A
EAR99
N
16/11, 16/19, 16/35
3VL47 40-2B
EAR99
N
16/29
3VL47 40-2D
EAR99
N
16/9, 16/13
3VL47 40-2E
EAR99
N
16/23, 16/27, 16/29
3VL47 40-3.
on req.
3VL47 40-3A
EAR99
N
16/11, 16/19, 16/35
3VL47 40-3B
EAR99
N
16/29
3VL47 40-3D
EAR99
N
16/9, 16/13
3VL47 40-3E
EAR99
N
16/23, 16/27, 16/29
3VL57 3
EAR99
N
16/8 ... 9, 16/12 ... 13, 16/22 ... 23,
16/26 ... 27
3VL77 10-3B
EAR99
3VL57 4
EAR99
N
16/8 ... 9, 16/22 ... 23, 16/26 ... 27
3VL77 12-1.
on req.
3VL57 50-1.
on req.
16/14, 16/16
3VL77 12-1A
EAR99
N
16/10, 16/19, 16/35
16/10
3VL77 12-1B
EAR99
N
16/28
16/8
3VL77 12-1D
EAR99
N
16/12
16/12
3VL77 12-1E
EAR99
N
16/28
EAR99
3VL57 50-1DC
3VL57 50-1DK
20/60
EAR99
N
16/14, 16/16, 16/30, 16/32
16/22, 16/26
3VL47 31-1.
3VL57 50-1A
20
Page
16/15, 16/17, 16/31, 16/33
16/15, 16/17, 16/31, 16/33
16/14, 16/16, 16/30, 16/32
16/15, 16/17, 16/31, 16/33
16/15, 16/17, 16/31, 16/33
N
N
N
Siemens LV 1 · 2008
16/15, 16/17, 16/31, 16/33
16/14, 16/16, 16/30, 16/32
16/15, 16/17, 16/31, 16/33
16/15, 16/17, 16/31, 16/33
16/14, 16/16, 16/30, 16/32
16/15, 16/17, 16/31, 16/33
16/15, 16/17, 16/31, 16/33
16/14, 16/16, 16/30, 16/32
LV1_20.book Seite 61 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
ECCN
Page
Order No.
ECCN
AL
16/15, 16/17, 16/31, 16/33
3VL93 00-3M
EAR99
AL
Export
markings
Page
3VL77 12-2.
on req.
N
16/46
3VL77 12-2A
EAR99
N
16/11, 16/19, 16/35
3VL93 00-3T
EAR99
N
16/57
3VL77 12-2B
EAR99
N
16/29
3VL93 00-4
EAR99
N
16/49 ... 51, 16/57
3VL77 12-2D
EAR99
N
16/13
3VL93 00-8
EAR99
N
16/56 ... 57, 16/62 ... 63, 16/70 ... 71
3VL77 12-2E
EAR99
N
16/29
3VL93 20-6
on req.
3VL77 12-3.
on req.
16/15, 16/17, 16/31, 16/33
3VL93 20-7
N
N
16/20
3VL77 12-3A
EAR99
N
16/11, 16/19, 16/35
3VL93 20-8
EAR99
N
16/69
3VL77 12-3B
EAR99
N
16/29
3VL93 21
EAR99
N
16/62 ... 63
3VL77 12-3D
EAR99
N
16/13
3VL93 25-5
N
N
16/55
3VL77 12-3E
EAR99
N
16/29
3VL93 25-6
on req.
3VL87 16-1.
on req.
16/14, 16/16, 16/30, 16/32
3VL93 25-7
N
N
16/20
3VL87 16-1A
EAR99
N
16/10, 16/19, 16/35
3VL93 25-8
EAR99
N
16/69
3VL87 16-1B
EAR99
N
16/28
3VL94 00-1SC
N
N
16/40
3VL87 16-1D
EAR99
N
16/12
3VL94 00-1SJ
EAR99
N
16/40
3VL87 16-1E
EAR99
N
16/28
3VL94 00-1SK
N
N
16/40
3VL87 16-2.
on req.
16/15, 16/17, 16/31, 16/33
3VL94 00-1SM
EAR99
N
16/40
3VL87 16-2A
EAR99
N
16/11, 16/19, 16/35
3VL94 00-1SQ
N
N
16/40
3VL87 16-2B
EAR99
N
16/29
3VL94 00-1SR
N
N
16/40
3VL87 16-2D
EAR99
N
16/13
3VL94 00-1ST
N
N
16/40
3VL87 16-2E
EAR99
N
16/29
3VL94 00-1SV
EAR99
N
16/40
3VL87 16-3.
on req.
16/15, 16/17, 16/31, 16/33
3VL94 00-1UD
EAR99
N
16/40
3VL87 16-3A
EAR99
N
16/11, 16/19, 16/35
3VL94 00-1UG
EAR99
N
16/40
3VL87 16-3B
EAR99
N
16/29
3VL94 00-1UH
EAR99
N
16/40
3VL87 16-3D
EAR99
N
16/13
3VL94 00-1UJ
EAR99
N
16/40
3VL87 16-3E
EAR99
N
16/29
3VL94 00-1UK
EAR99
N
16/40
3VL90 00-3
on req.
16/43
3VL94 00-1UL
EAR99
N
16/40
3VL90 00-4
EAR99
N
16/49 ... 54
3VL94 00-1UM
EAR99
N
16/40
3VL90 00-8
EAR99
N
16/62 ... 67, 16/74
3VL94 00-1UN
N
N
16/40
3VL91 0
EAR99
N
16/49, 16/56
3VL94 00-1UP
N
N
16/40
3VL91 12-5GA
N
N
16/55
3VL94 00-1UQ
EAR99
N
16/40
3VL91 12-5GB
EAR99
N
16/55
3VL94 00-1UR
EAR99
N
16/40
3VL92 00-3
EAR99
N
16/56 ... 57
3VL94 00-1US
EAR99
N
16/40
3VL92 00-4
EAR99
N
16/50, 16/56 ... 57
3VL94 00-1UT
EAR99
N
16/40
3VL92 05
N
N
16/20
3VL94 00-1UU
N
N
16/40
3VL92 06-6
on req.
16/21, 16/36 ... 37
3VL94 00-1UV
EAR99
N
16/40
3VL92 06-7
N
N
16/20
3VL94 00-2AB
EAR99
N
16/40
3VL92 08
N
N
16/20
3VL94 00-2AD
EAR99
N
16/40
3VL92 10-6
on req.
16/21, 16/36 ... 37
3VL94 00-2AH
EAR99
N
16/42
3VL92 10-7
N
N
16/20
3VL94 00-2AJ
EAR99
N
16/42
3VL92 10-8
EAR99
N
16/69
3VL94 00-3A
EAR99
N
16/44
3VL92 12
N
N
16/20
3VL94 00-3HA
EAR99
N
16/44
3VL92 16-5
N
N
16/55
3VL94 00-3HC
EAR99
N
16/44
3VL92 16-6
on req.
16/21, 16/36 ... 37
3VL94 00-3HE
EAR99
N
16/44
3VL92 16-7
N
N
16/20
3VL94 00-3HF
EAR99
N
16/44
3VL92 16-8
EAR99
N
16/69
3VL94 00-3HG
EAR99
N
16/44
3VL92 8
EAR99
N
16/69
3VL94 00-3HL
EAR99
N
16/64
3VL93 00-3A
EAR99
N
16/43
3VL94 00-3HN
EAR99
N
16/47
3VL93 00-3HA
EAR99
N
16/43
3VL94 00-3HP
EAR99
N
16/44
3VL93 00-3HC
EAR99
N
16/43
3VL94 00-3HR
on req.
3VL93 00-3HE
EAR99
N
16/43
3VL94 00-3MJ
N
N
16/47
3VL93 00-3HF
EAR99
N
16/43
3VL94 00-3ML
EAR99
N
16/47
3VL93 00-3HG
EAR99
N
16/43
3VL94 00-3MN
EAR99
N
16/47
3VL93 00-3HL
EAR99
N
16/62 ... 63
3VL94 00-3MQ
EAR99
N
16/47
3VL93 00-3HP
EAR99
N
16/43
3VL94 00-3MS
EAR99
N
16/47
3VL93 00-3HR
N
N
16/43
3VL94 00-3T
EAR99
N
16/58 ... 60
16/21, 16/36 ... 37
16/21, 16/36 ... 37
Siemens LV 1 · 2008
20
16/44
20/61
LV1_20.book Seite 62 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3VL94 00-4
EAR99
N
16/51, 16/58
3VL98 00-1UP
N
N
16/41
3VL94 00-8
EAR99
N
16/58, 16/64, 16/70
3VL98 00-1UQ
EAR99
N
16/41
3VL94 20-7DC
EAR99
N
16/20
3VL98 00-1UR
N
N
16/41
3VL94 20-7DK
N
N
16/20
3VL98 00-1US
N
N
16/41
3VL94 25
N
N
16/20
3VL98 00-1UT
EAR99
N
16/41
3VL94 31-6
on req.
16/21, 16/36 ... 37
3VL98 00-1UU
N
N
16/41
3VL94 31-7
N
N
16/20
3VL98 00-1UV
N
N
16/41
3VL94 40-5
EAR99
N
16/55
3VL98 00-2
EAR99
N
16/41
3VL94 40-6
on req.
16/21, 16/36 ... 37
3VL98 00-3A
EAR99
N
16/48
3VL94 40-7
N
N
16/20
3VL98 00-3H
EAR99
N
16/48, 16/66 ... 67
3VL94 40-8
EAR99
N
16/69
3VL98 00-3MJ
EAR99
N
16/48
3VL95 00-3
on req.
16/45
3VL98 00-3ML
EAR99
N
16/48
3VL95 00-4
EAR99
N
16/52, 16/59
3VL98 00-3MN
EAR99
N
16/48
3VL95 00-8
EAR99
N
16/64 ... 65
3VL98 00-3MQ
N
N
16/48
3VL95 3
EAR99
N
16/20
3VL98 00-3MS
EAR99
N
16/48
3VL95 4
EAR99
N
16/20
3VL98 00-4
EAR99
N
16/53 ... 54, 16/60 ... 61
3VL95 50-6
on req.
16/21
3VL98 00-8
EAR99
N
16/60 ... 61, 16/66 ... 67, 16/72 ... 73
3VL95 50-7
EAR99
16/20
3VL98 16-2
EAR99
N
16/42
3VL95 63-6
on req.
16/21, 16/36 ... 37
3VL98 16-6
on req.
3VL95 63-7
EAR99
N
16/20
3VL98 16-8
EAR99
3VL95 63-8
EAR99
N
16/69
3W
3VL96 00-3A
EAR99
N
16/45
3WL11
on req.
3VL96 00-3H
EAR99
N
16/45, 16/47, 16/65
15/6 ... 7, 15/10 ... 11, 15/14 ... 15,
15/18 ... 19
3VL96 00-3M
EAR99
N
16/47
3WL12
on req.
15/6 ... 8, 15/10 ... 12, 15/14 ... 16,
15/18 ... 20, 15/47 ... 48
3VL96 00-4
EAR99
N
16/52 ... 53, 16/59
3WL13
on req.
3VL96 00-8B
EAR99
N
16/65, 16/71
15/8 ... 9, 15/12 ... 13, 15/16 ... 17,
15/20 ... 21
3VL96 00-8CA
EAR99
N
16/59
3WL91 11-0AA1
N
N
15/31
16/59
3WL91 11-0AA2
N
N
15/31
16/59
3WL91 11-0AA3
N
N
15/31
16/58 ... 59
3WL91 11-0AA5
N
N
15/31
N
N
15/31
3VL96 00-8CB3
3VL96 00-8CB4
3VL96 00-8CE
N
EAR99
EAR99
N
N
N
N
16/21, 16/37
N
16/69
3VL96 00-8L
EAR99
N
16/65
3WL91 11-0AA6
3VL96 00-8S
EAR99
N
16/65
3WL91 11-0AB01
N
N
15/36
3VL96 80-6
on req.
16/21, 16/36 ... 37
3WL91 11-0AB02
N
N
15/36
3VL96 80-8
EAR99
N
16/69
3WL91 11-0AB03
N
N
15/36
3VL97 0
EAR99
N
16/60, 16/63 ... 67
3WL91 11-0AB04
N
N
15/36
3VL97 10
on req.
16/21, 16/37
3WL91 11-0AB07
N
N
15/36
16/21, 16/37
3WL91 11-0AB08
N
N
15/36
16/69
3WL91 11-0AB10
N
N
15/36
16/62 ... 67
3WL91 11-0AB12
N
N
15/36
16/41
3WL91 11-0AB18
N
N
15/36
N
N
15/37
3VL97 12-6
on req.
3VL97 12-8
EAR99
3VL97 15
EAR99
3VL98 00-1SC
N
N
N
N
3VL98 00-1SJ
EAR99
N
16/41
3WL91 11-0AD
3VL98 00-1SK
N
N
16/41
3WL91 11-0AE
N
N
15/37
3VL98 00-1SM
EAR99
N
16/41
3WL91 11-0AF
N
N
15/37
3VL98 00-1SQ
N
N
16/41
3WL91 11-0AG
N
N
15/37
3VL98 00-1SR
N
N
16/41
3WL91 11-0AH
N
N
15/35
3VL98 00-1ST
N
N
16/41
3WL91 11-0AJ
N
N
15/35
16/41
3WL91 11-0AK
N
N
15/31 ... 32
16/41
3WL91 11-0AL
N
N
15/42
16/41
3WL91 11-0AM0
N
N
15/42
16/41
3WL91 11-0AM9
on req.
N
N
15/43
3VL98 00-1SV
3VL98 00-1UD
3VL98 00-1UG
3VL98 00-1UH
20
Page
N
N
N
N
N
N
N
N
15/44
3VL98 00-1UJ
N
N
16/41
3WL91 11-0AN0
3VL98 00-1UK
EAR99
N
16/41
3WL91 11-0AN1
N
N
15/43
3VL98 00-1UL
N
N
16/41
3WL91 11-0AN20
N
N
15/43
3VL98 00-1UM
EAR99
N
16/41
3WL91 11-0AN21
N
N
15/43
3VL98 00-1UN
N
N
16/41
3WL91 11-0AN22
N
N
15/43
20/62
Siemens LV 1 · 2008
LV1_20.book Seite 63 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
3WL91 11-0AN23
N
N
15/43
4AU
N
N
10/58 ... 59, 10/86 ... 87
3WL91 11-0AN24
N
N
15/43
4AV
N
N
11/5 ... 10
3WL91 11-0AN25
N
N
15/43
4AX
N
N
10/52 ... 53
3WL91 11-0AN26
N
N
15/43
4B
3WL91 11-0AN27
N
N
15/43
4BU43 32-2A
N
N
10/64, 10/67, 10/70, 10/72
3WL91 11-0AN28
N
N
15/43
4BU43 32-2C
N
N
10/65, 10/68, 10/70, 10/72
3WL91 11-0AN3
N
N
15/43
4BU43 32-2E
N
N
10/66, 10/69, 10/71, 10/73
3WL91 11-0AN4
N
N
15/43
4BU43 32-5A
N
N
10/64, 10/67, 10/70, 10/72
3WL91 11-0AP
N
N
15/38
4BU43 32-5C
N
N
10/65, 10/68, 10/70, 10/72
3WL91 11-0AR
N
N
15/38
4BU43 32-5E
N
N
10/66, 10/69, 10/71, 10/73
3WL91 11-0AS
N
N
15/38
4BU43 33-2A
N
N
10/74, 10/77, 10/80, 10/82
3WL91 11-0AT
N
N
15/31 ... 32, 15/34, 15/40 ... 41,
16/74
4BU43 33-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU43 33-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU43 33-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU43 33-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU43 33-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU43 42-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU43 42-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU43 42-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU43 42-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU43 42-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU43 42-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU43 43-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU43 43-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU43 43-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU43 43-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU43 43-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU43 43-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU43 52-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU43 52-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU43 52-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU43 52-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU43 52-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU43 52-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU43 53-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU43 53-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU43 53-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU43 53-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU43 53-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU43 53-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU45 32-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU45 32-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU45 32-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU45 32-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU45 32-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU45 32-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU45 33-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU45 33-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU45 33-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU45 33-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU45 33-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU45 33-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU45 42-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU45 42-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU45 42-2E
N
N
10/66, 10/69, 10/71, 10/73
3WL91 11-0BA0
N
N
15/39
3WL91 11-0BA10
N
N
15/39
3WL91 11-0BA13
N
N
15/34
3WL91 11-0BA14
N
N
15/34, 16/40 ... 41
3WL91 11-0BA2
N
N
15/32
3WL91 11-0BA3
N
N
15/32
3WL91 11-0BA4
N
N
15/32
3WL91 11-0BA5
N
N
15/32
3WL91 11-0BA7
N
N
15/32, 15/35
3WL91 11-0BA8
N
N
15/32 ... 33
3WL91 11-0BB1
N
N
15/33
3WL91 11-0BB2
N
N
15/33
3WL91 11-0BB3
N
N
15/33
3WL91 11-0BB4
N
N
15/33
3WL91 11-0BB5
N
N
15/39
3WL91 11-0BB6
N
N
15/40
3WL91 11-0BB7
N
N
15/40
3WL91 11-0BC
N
N
15/40, 15/44, 16/74
3WL91 11-0BD
N
N
15/45
3WL91 12
N
N
15/33
3WL92
on req.
3WL93
N
15/29 ... 30, 15/49
N
15/31
3Z
3ZS1
5D992B1 N
1/3 ... 4, 1/6, 1/8, 6/26, 7/13, 16/74
3ZS23
N
N
15/40, 16/74, 18/7
3ZS27
EAR99
N
18/5 ... 6
3ZX
on req.
6/17, 6/27
4A
4AM2
4AM3
4AM4
4AM5
4AM6
4AP
4AT30 1
4AT30 3
4AT36 0
4AT36 1
4AT36 3
4AT39 0
4AT39 1
4AT39 3
4AT4
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
10/20 ... 23, 10/42 ... 46
10/6 ... 19, 10/24 ... 41
10/6 ... 19, 10/24 ... 41
10/6 ... 19, 10/24 ... 41
10/24 ... 41
10/58 ... 60, 10/86 ... 87
10/54
10/24 ... 36, 10/39 ... 41
10/54
10/24 ... 36, 10/39 ... 41, 10/54
10/24 ... 36, 10/39 ... 41
10/54
10/24 ... 36, 10/39 ... 41, 10/54
10/24 ... 36, 10/39 ... 41
10/54
Siemens LV 1 · 2008
20
Order No.
20/63
LV1_20.book Seite 64 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
20
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
4BU45 42-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU52 33-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU45 42-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU52 33-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU45 42-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU53 32-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU45 43-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU53 32-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU45 43-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU53 32-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU45 43-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU53 32-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU45 43-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU53 32-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU45 43-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU53 32-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU45 43-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU53 33-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU47 32-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU53 33-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU47 32-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU53 33-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU47 32-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU53 33-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU47 32-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU53 33-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU47 32-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU53 33-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU47 32-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU53 42-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU47 33-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU53 42-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU47 33-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU53 42-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU47 33-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU53 42-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU47 33-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU53 42-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU47 33-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU53 42-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU47 33-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU53 43-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU47 42-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU53 43-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU47 42-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU53 43-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU47 42-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU53 43-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU47 42-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU53 43-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU47 42-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU53 43-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU47 42-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU54 32-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU47 43-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU54 32-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU47 43-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU54 32-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU47 43-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU54 32-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU47 43-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU54 32-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU47 43-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU54 32-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU47 43-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU54 33-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU47 52-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU54 33-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU47 52-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU54 33-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU47 52-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU54 33-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU47 52-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU54 33-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU47 52-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU54 33-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU47 52-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU54 42-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU47 53-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU54 42-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU47 53-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU54 42-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU47 53-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU54 42-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU47 53-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU54 42-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU47 53-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU54 42-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU47 53-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU54 43-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU52 32-2A
N
N
10/64, 10/67, 10/70, 10/72
4BU54 43-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU52 32-2C
N
N
10/65, 10/68, 10/70, 10/72
4BU54 43-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU52 32-2E
N
N
10/66, 10/69, 10/71, 10/73
4BU54 43-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU52 32-5A
N
N
10/64, 10/67, 10/70, 10/72
4BU54 43-5C
N
N
10/75, 10/78, 10/80, 10/82
4BU52 32-5C
N
N
10/65, 10/68, 10/70, 10/72
4BU54 43-5E
N
N
10/76, 10/79, 10/81, 10/83
4BU52 32-5E
N
N
10/66, 10/69, 10/71, 10/73
4BU55 32
N
N
10/64 ... 69
4BU52 33-2A
N
N
10/74, 10/77, 10/80, 10/82
4BU55 33
N
N
10/74 ... 79
4BU52 33-2C
N
N
10/75, 10/78, 10/80, 10/82
4BU56 32
N
N
10/64 ... 69
4BU52 33-2E
N
N
10/76, 10/79, 10/81, 10/83
4BU56 33
N
N
10/74 ... 79
4BU52 33-5A
N
N
10/74, 10/77, 10/80, 10/82
4BU56 42
N
N
10/64 ... 69
20/64
Siemens LV 1 · 2008
LV1_20.book Seite 65 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
Export
markings
Page
AL
ECCN
AL
N
N
10/74 ... 79
5SH33
N
N
19/69 ... 70
4BU58 32
N
N
10/64 ... 69
5SH34
N
N
19/70
4BU58 33
N
N
10/74 ... 79
5SH35 0
N
N
14/44, 19/79, 19/125
4BU58 42
N
N
10/64 ... 69
5SH35 2
N
N
14/45 ... 46, 19/134
4BU58 43
N
N
10/74 ... 79
5SH35 30
N
N
14/45, 19/134
4BU58 52
N
N
10/64 ... 69
5SH35 31
N
N
14/46, 19/134
4BU58 53
N
N
10/74 ... 79
5SH35 32
N
N
14/45, 19/134
4BU59 32
N
N
10/64 ... 69
5SH35 33
N
N
14/44, 19/134
4BU59 33
N
N
10/74 ... 79
5SH35 34
N
N
14/44, 19/134
4BU60 32
N
N
10/64 ... 69
5SH35 35
N
N
14/48, 19/125
4BU60 33
N
N
10/74 ... 79
5SH35 36
N
N
14/45, 14/47, 19/127, 19/134
5SH35 37
N
N
14/45, 14/47, 19/127, 19/134
4F
4FK
N
N
10/56
5SH35 4
N
N
19/79
4FL
N
N
10/55, 10/88
5SH35 5
N
N
19/79
5SH35 6
N
N
19/79
5SH37
N
N
19/69
5SH4
N
N
19/62
5SH50
N
N
19/63
5SH51
N
N
19/63
5SH52
N
N
14/55, 19/61 ... 62, 19/130
5SH53
N
N
19/77 ... 78
5SH54
N
N
19/63
5SH55 0
N
N
19/63
5SH55 1
N
N
19/77
5SH55 25
N
N
19/131
5SH55 26
N
N
19/131
5SH55 27
N
N
19/59, 19/131
5SJ
N
N
19/20, 19/33 ... 35
5SK
N
N
19/37 ... 38
5SM1
N
N
19/46
5SM2
N
N
19/24 ... 25, 19/49 ... 50
5SM31
N
N
19/40
5SM33 1
N
N
19/40 ... 42
5SM33 42-4
EAR99H
N
19/43
5SM33 42-6
N
N
19/40 ... 42
5SM33 44-4
EAR99H
N
19/43
5SM33 44-6
N
N
19/40 ... 42
5SM33 45
N
N
19/40
5SM33 46-4
EAR99H
N
19/43
5SM33 46-6
N
N
19/40 ... 42
5SM33 47-4
EAR99H
N
19/43
5SM33 47-6
N
N
19/40 ... 41
5SM33 5
N
N
19/41
5SM34
N
N
19/40, 19/42
5SM36 1
N
N
19/40, 19/42
5SM36 42-4
EAR99H
N
19/43
5SM36 42-6
N
N
19/40
5SM36 44-4
EAR99H
N
19/43
5SM36 44-6
N
N
19/40 ... 42
5SM36 44-8
N
N
19/42
5SM36 45
N
N
19/40, 19/42
5SM36 46-4
EAR99H
N
19/43
5SM36 46-5
EAR99H
N
19/43
5SM36 46-6
N
N
19/40 ... 42
5SM36 46-8
N
N
19/41 ... 42
4N
4NC
N
N
14/69 ... 70
5S
5SA
N
N
19/66
5SB
N
N
19/66
5SC
N
N
19/66
5SD4
N
N
19/121
5SD5
N
N
19/121
5SD6
N
N
19/67
5SD74 1
N
N
19/135, 19/140
5SD74 2
N
N
19/138, 19/140
5SD74 3
N
N
19/139 ... 141
5SD74 42
N
N
19/136
5SD74 43
N
N
19/136
5SD74 44
N
N
19/136
5SD74 48
N
N
19/140
5SD74 6
N
N
19/137 ... 138, 19/140
5SD74 8
N
N
19/137, 19/140
5SD74 9
N
N
19/140
5SD8
N
N
19/66
5SE
N
N
19/59, 19/123
5SF
N
N
14/55, 19/67 ... 68, 19/130
5SG1
N
N
19/60 ... 61
5SG5
N
N
19/60 ... 61
5SG6
N
N
14/55, 19/129
5SG71 1
N
N
19/59
5SG71 2
N
N
19/59
5SG71 3
N
N
19/59
5SG71 5
N
N
19/59
5SG71 6
N
N
19/59
5SG72
N
N
19/131
5SG76
N
N
19/60
5SG77
N
N
19/60
5SH1
N
N
19/68
5SH2
N
N
14/55, 19/69, 19/130
5SH30
N
N
19/69, 19/130
5SH31
N
N
19/69
5SH32 0
N
N
19/69
5SH32 1
N
N
19/69
5SH32 2
N
N
19/69
5SH32 8
N
N
19/69
Siemens LV 1 · 2008
20
ECCN
4BU56 43
20/65
LV1_20.book Seite 66 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
20
Order No.
Export
markings
Page
Order No.
ECCN
AL
5SM36 47-4
EAR99H
N
19/43
5T
5SM36 47-5
EAR99H
N
19/43
5SM36 47-6
N
N
19/40, 19/42
5SM36 5
N
N
5SM37 42
N
5SM37 44
Export
markings
Page
ECCN
AL
5TE68 0
N
N
5TE68 1
on req.
19/41
5TE9
N
N
19/143
N
19/40
5TG
N
N
19/26
N
N
19/40
5TT
N
N
19/90
5SM37 45
N
N
19/40, 19/42
6A
5SM37 46-4
EAR99H
N
19/43
6AG
N
N
7/22
6B
EAR99H
N
7/27
6ED10 50
N
N
7/22, 7/24, 7/26 ... 27
6ED10 52
N
N
7/21, 7/23
6ED10 55
N
N
7/25
6ED10 56
N
N
7/22, 7/24, 7/26
6ED10 57-1
N
N
1/3, 6/79, 7/22, 7/24, 7/26
6ED10 57-3
EAR99T
N
7/22, 7/26
6ED10 57-4
N
N
7/29
6ED10 58
N
N
7/22, 7/24, 7/26, 7/30
6EP13
N
N
11/11 ... 13
6EP14
N
N
11/13
6EP17
N
N
11/12
6EP19 31
N
N
11/15
6EP19 35-6MC
EAR99H
N
11/16
6EP19 35-6MD1
N
N
11/16
6EP19 35-6MD3
EAR99H
N
11/16
6EP19 35-6ME
N
N
11/16
6EP19 35-6MF
N
N
11/16
6EP19 6
N
N
11/14
6ES5
N
N
6/97 ... 99
6ES71 31-4BB
EAR99H
N
6/100
6ES71 31-4BD01-0AA EAR99H
N
6/100
6ES71 31-4BD01-0AB N
N
6/100
6ES71 31-4BD5
EAR99H
N
6/100
6ES71 31-4C
EAR99H
N
6/100
6ES71 31-4E
EAR99H
N
6/100
6ES71 31-4F
EAR99H
N
6/100
6ES71 31-4R
EAR99H
N
6/100
6ES71 32-4BB0
EAR99H
N
6/100
6ES71 32-4BB31-0AA N
N
6/100
6ES71 32-4BB31-0AB EAR99H
N
6/100
6ES71 32-4BD0
N
N
6/100
6ES71 32-4BD3
on req.
6ES71 32-4F
on req.
6ES71 32-4HB0
N
N
6/100
6ES71 32-4HB1
EAR99H
N
6/100
6ES71 34-4F
N
N
6/100
6ES71 34-4G
EAR99H
N
6/100
6ES71 34-4J
EAR99H
N
6/100
6ES71 34-4L
EAR99H
N
6/100
6ES71 34-4M
EAR99H
N
6/100
6ES71 34-4N
EAR99H
N
6/100
6ES71 35
EAR99H
N
6/100
6ES71 38-4A
EAR99H
N
6/99
6ES71 38-4CA
EAR99H
N
6/99
6ES71 38-4CB
on req.
5SM37 46-5
EAR99H
N
19/43
5SM37 46-6
N
N
19/40
5SM37 47-4
EAR99H
N
19/43
5SM37 47-5
EAR99H
N
19/43
5SM38
N
N
19/42
5SP
N
N
19/12, 19/36
5ST13
N
N
19/36 ... 37
5ST18
N
N
19/38
5ST21 34
N
N
19/27, 19/57
5ST21 35
N
N
19/27, 19/57
5ST21 36
N
N
19/27, 19/57
5ST21 4
N
N
19/56
5ST21 56
N
N
19/56
5ST21 57
N
N
19/56, 19/78
5ST21 7
N
N
19/26, 19/57
5ST21 8
N
N
19/77
5ST21 9
N
N
19/77
5ST22
N
N
19/26, 19/57
5ST30
N
N
19/23, 19/46
5ST36
N
N
19/30 ... 31, 19/56, 19/78
5ST37 0
N
N
19/31 ... 32, 19/56, 19/77 ... 78
5ST37 1
N
N
19/31 ... 32, 19/77 ... 78
5ST37 3
N
N
19/31, 19/56
5ST37 40
N
N
19/31
5ST37 41
N
N
19/31
5ST37 42
N
N
19/31
5ST37 43
N
N
19/31
5ST37 44
N
N
19/31
5ST37 45
N
N
19/31
5ST37 46
N
N
19/31
5ST37 48
N
N
19/32, 19/78
5ST37 5
N
N
19/32, 19/56, 19/78
5ST37 6
N
N
19/32
5ST38
N
N
19/26, 19/47, 19/54
5SU
N
N
19/43 ... 44, 19/52 ... 53
5SW
N
N
19/27, 19/46 ... 47, 19/57
5SY4
N
N
19/8 ... 11
5SY5
N
N
19/13
5SY60
on req.
5SY61
N
N
19/5 ... 6
5SY62
N
N
19/5 ... 6
5SY63
N
N
19/5, 19/7
5SY64
N
N
19/5, 19/7
5SY65
N
N
19/5 ... 6
5SY66
N
N
19/5, 19/7
5SY7
N
N
19/14 ... 16
5SY8
N
N
19/17 ... 18
20/66
19/21
Siemens LV 1 · 2008
6BK
19/142 ... 143
19/143
6E
6/100
6/100
6/99
LV1_20.book Seite 67 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
Export
markings
Page
ECCN
AL
ECCN
AL
6ES71 38-4CF
EAR99H
N
6/101
6ES71 94-4BD
EAR99H
N
6ES71 38-4DA
EAR99H
N
6/103
6ES71 94-4BH
on req.
6ES71 38-4DB
N
N
6/102
6ES71 94-4C
EAR99H
N
6/126 ... 127
6ES71 38-4DC
N
N
6/103
6ES71 94-4D
EAR99H
N
6/118, 6/127
6ES71 38-4DD
N
N
6/103
6ES71 94-4E
EAR99H
N
6/126
6ES71 38-4DE
EAR99H
N
6/103
6ES71 94-4F
EAR99H
N
6/126
6ES71 38-4DF
EAR99H
N
6/104
6ES71 94-4G
N
N
6/121, 6/123, 6/125
6ES71 38-4DL
N
N
6/103
6ES71 94-4H
N
N
6/123, 6/125 ... 128
6ES71 38-4FA
on req.
6/101
6ES71 95
N
N
6/96
6ES71 38-4FB
EAR99H
N
6/101
6ES73
N
N
2/20 ... 21, 6/102
6ES71 38-4FD
EAR99H
N
6/99
6ES77
N
N
6/98 ... 99
6ES71 38-4G
EAR99H
N
6/102
6ES78
N
N
6/101
6ES71 38-4H
N
N
6/98
6ES79 0
N
N
6/81
6ES71 41
EAR99H
N
6/126
6ES79 5
N
N
6/97 ... 99
6ES71 42
EAR99H
N
6/126
6ES79 72-0BA
EAR99H
N
2/30
6ES71 44
EAR99H
N
6/127
6ES79 72-0BB
N
N
16/74
6ES71 45
EAR99H
N
6/127
6ES79 91
N
N
6/124
6ES71 48-4CA0
EAR99H
N
6/127
6ES79 98
5D992B1 N
6/96 ... 97, 6/101, 6/124 ... 125
6ES71 48-4CA6
on req.
6/128
6F
6ES71 48-4E
EAR99H
6/128
6FX2
on req.
6/103
N
N
6/102 ... 103
6/128
6ES71 48-4F
EAR99H
N
6/118, 6/127
6FX5
6ES71 51-1AA
N
N
6/96
6G
6ES71 51-1AB
EAR99H
N
6/96
6GK14 11
EAR99H
N
2/28
6ES71 51-1B
on req.
6/96, 6/101
6GK14 15-2A
N
N
2/32
6ES71 51-1CA00-0
N
6/96
6GK14 15-2B
EAR99H
N
2/30
6/96
6GK19 00
EAR99H
N
2/28, 2/30
6/96
6GK19 01-0DB
N
N
6/126
6/97
6GK19 01-0DM
EAR99H
N
6/126
6/98
6GK19 01-0F
EAR99H
N
6/96
6/98
6GK19 01-1
N
N
2/28, 2/30, 6/97, 6/125
N
N
6/122 ... 124, 6/128
6ES71 51-1CA00-1
6ES71 51-1CA00-3
6ES71 51-3
6ES71 51-7AA
6ES71 51-7AB
EAR99H
EAR99H
EAR99H
N
N
N
N
on req.
N
N
6ES71 51-7F
N
N
6/99
6GK19 05
6ES71 54-1
EAR99H
N
6/122
6GK19 7
N
N
2/18, 2/20 ... 21, 2/32
6ES71 54-2
EAR99H
N
6/122, 6/127
6GK5
5A991
N
6/125
6ES71 54-4AB0
EAR99H
N
6/127
6GK71
N
N
2/18
6ES71 54-4AB1
on req.
6/124
6GK72 43-2AX00
N
N
2/19
6/125
6GK72 43-2AX01
EAR99H
N
2/19
6/96 ... 100, 6/102 ... 103
6GK73
N
N
2/20 ... 21
6S
6SL32 0
N
N
6/80
6SL32 3
on req.
6SL32 5
N
6SL32 6
on req.
6ES71 54-8
6ES71 93-4B
EAR99H
N
N
N
6ES71 93-4C
N
N
6/101 ... 102, 6/104 ... 108
6ES71 93-4D
N
N
6/96
6ES71 93-4F
6ES71 93-4G
N
N
N
N
6/96
6/100, 6/102 ... 103, 6/105 ... 106,
6/108
6ES71 93-4J
N
N
6/97 ... 99
6X
6ES71 93-4L
N
N
6/82, 6/102, 6/108
6XV
6ES71 94-1
N
N
2/43, 2/65, 6/64, 6/122
7K
6ES71 94-3
N
N
6/123
6ES71 94-4AA
6ES71 94-4AC
6ES71 94-4AD
EAR99H
EAR99H
EAR99H
N
N
N
6/128
N
6/81
6/128
N
N
6/97, 6/122 ... 125, 6/128
7KT10 0
N
N
19/158
6/122
7KT10 10
N
N
19/158
6/122
7KT10 11
N
N
19/158
6/122
7KT10 12
N
N
19/158
N
N
19/158
6ES71 94-4AF
on req.
6/124
7KT10 2
6ES71 94-4AG
on req.
6/124
7KT11 1
N
N
19/157
6ES71 94-4AJ
on req.
6/124
7KT11 2
N
N
19/157
6ES71 94-4AN
EAR99H
N
6/125
7KT11 4
N
N
19/157
6ES71 94-4BA
EAR99H
N
6/127
7KT11 6
N
N
19/155
6/127
7KT12
N
N
19/155
7KT13
N
N
19/145, 19/147, 19/150
6ES71 94-4BC
EAR99H
N
Siemens LV 1 · 2008
20
N
6/127
20/67
LV1_20.book Seite 68 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
Order No.
Page
ECCN
AL
ECCN
AL
7KT15
N
N
19/153
8US19 21-2AC
N
N
14/37, 14/49, 19/126
7KT55
N
N
19/160
8US19 21-2AD00
N
N
14/37, 14/49, 19/126
7KT56
N
N
19/160
8US19 21-2AD01
N
N
14/37, 14/49
7KT58 0
N
N
19/159
8US19 21-2BA
N
N
14/37, 14/49, 19/126
7KT58 1
N
N
19/159
8US19 21-2BB
N
N
14/37, 14/49, 19/126
7KT58 2
N
N
19/159
8US19 21-2BC
N
N
14/37, 14/49, 19/126
7KT58 3
N
N
19/159
8US19 21-2BD00
N
N
14/37, 14/49, 19/126
7KT90 0
N
N
19/160
8US19 21-2BD01
N
N
14/37, 14/49
7KT90 10
N
N
19/156
8US19 21-2BE
N
N
14/46, 14/56
7KT90 11
N
N
19/156
8US19 21-2BF
N
N
14/42, 14/46, 14/56
7KT90 2
N
N
19/160
8US19 22-1
N
N
14/37, 14/44, 14/46, 14/49, 19/134
7KT90 3
N
N
19/155
8US19 22-2
N
N
14/36, 14/45, 14/47, 19/125
8US19 23
N
N
14/44, 19/134
7M
7MH44
EAR99H
N
6/105
8US19 27
N
N
14/51, 16/69
7MH46
EAR99H
N
6/104
8US19 41-2AA01
N
N
14/49
7MH47
N
N
6/105 ... 106
8US19 41-2AA02
N
N
14/49
7MH49
N
N
6/104, 6/106
8US19 41-2AA03
N
N
14/48
8US19 41-2AA04
N
N
14/49
8G
8GK4
N
N
19/124, 19/127
8US19 41-2AC
N
N
14/49
8GK97 1
N
N
19/125
8US19 41-2B
N
N
14/47, 14/49, 19/126
8GK97 3
N
N
19/125
8US19 43
N
N
14/47
8US19 48
N
N
14/47
8US19 98-1
N
N
6/53, 14/38 ... 39, 14/42, 14/50 ... 52,
14/56, 19/132
8H
8HP27 0
N
N
17/10
8HP27 1
N
N
17/10
8HP27 3
N
N
17/10
8US19 98-2
N
N
6/53, 14/39, 14/52, 19/132
8HP27 4
N
N
17/10
8US19 98-4
N
N
14/42, 14/56
8HP27 5
N
N
17/10
8US19 98-7
N
N
5/29, 6/52, 14/42, 14/56
8HP27 6
N
N
17/10
8US19 98-8
N
N
6/53, 14/42, 14/56
8HP6
N
N
17/57, 19/107
8W
8WA28 03
N
N
8JH
N
N
19/79, 19/126
3/113, 5/29, 5/57, 7/79, 7/84, 7/86,
7/88
8JK
N
N
19/126
8WA28 07
--
8WA28 4
N
N
6/100, 6/102, 6/105 ... 106, 6/108
8J
8U
2/50
8UB
N
N
17/8 ... 9
8WA28 6
N
N
6/100, 6/102, 6/105 ... 106, 6/108
8UC60
N
N
14/66, 17/11 ... 13,
17/36 ... 38, 17/42 ... 43
8WA28 8
N
N
3/113, 4/10, 4/19, 5/29, 5/57, 7/79,
7/84, 7/86, 7/88
8UC61
N
N
16/76
8WA8
N
N
6/102, 6/108
14/66
8WC50 2
on req.
14/59, 14/61, 14/63, 14/65 ... 66,
17/5, 17/11, 17/34, 17/36,
17/41 ... 42
8WC50 5
N
N
14/46
8WC50 6
N
N
14/46
8WC51
N
N
14/46
8WD
N
N
9/105 ... 110
8WH
N
N
5/51
N
N
6/105
8UC70
N
8UC71
N
8UC72
N
8UC73
N
N
N
N
N
14/59, 14/61, 14/63, 14/65 ... 66,
17/5, 17/11, 17/34, 17/36,
17/41 ... 42
14/59, 14/61, 14/63, 14/65 ... 66,
17/5, 17/7, 17/9, 17/11 ... 13, 17/34,
17/37, 17/41, 17/43
14/36
C7
C71
E2
8UC74
N
N
14/59, 14/61, 14/63, 14/65 ... 66,
17/12 ... 13, 17/34, 17/38
8UC9
N
N
14/66 ... 67, 17/7 ... 9, 17/12 ... 13,
17/34, 17/38
LZS:M
N
N
3/92
8US10
N
N
5/23, 5/29, 6/52, 14/38 ... 39, 16/68
LZS:P T1
N
N
3/92
8US11
N
N
5/23, 14/39, 14/51
LZS:P T3
EAR99
N
3/90
8US12
N
N
5/23, 5/29, 6/52, 14/48, 14/50 ... 52,
16/69, 17/68, 19/111, 19/132
LZS:P T5
EAR99
N
3/90
LZS:P T7
N
N
3/91
LZS:P TM
N
N
3/92, 3/94
LZS:R T1
N
N
3/94
LZS:R T3A4L
N
N
3/93
LZS:R T3A4R
EAR99
N
3/93
8US19 0
N
8US19 21-1
N
8US19 21-2AA
20
Export
markings
8US19 21-2AB
20/68
N
N
N
N
N
N
Siemens LV 1 · 2008
14/36
14/48, 19/125
14/37, 14/49, 19/126
14/37, 14/49, 19/126
E20
on req.
15/40
LZ
LV1_20.book Seite 69 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Order No. Index
Including export markings
Order No.
Export
markings
Page
ECCN
AL
LZS:R T3A4S
EAR99
N
3/93
LZS:R T3A4T
EAR99
N
3/93
LZS:R T3B4L
N
N
3/93
LZS:R T3B4R
EAR99
N
3/93
LZS:R T3B4S
EAR99
N
3/93
LZS:R T3B4T
EAR99
N
3/93
LZS:R T3D4L
N
N
3/93
LZS:R T3D4R
EAR99
N
3/93
LZS:R T3D4S
EAR99
N
3/93
LZS:R T3D4T
EAR99
N
3/93
LZS:R T4A4L
N
N
3/93
LZS:R T4A4R
EAR99
N
3/93
LZS:R T4A4S
EAR99
N
3/93
LZS:R T4A4T
N
N
3/93
LZS:R T4B4L
N
N
3/93
LZS:R T4B4R
EAR99
N
3/93
LZS:R T4B4S
EAR99
N
3/93
LZS:R T4B4T
N
N
3/93
LZS:R T4D4L
N
N
3/93
LZS:R T4D4R
EAR99
N
3/93
LZS:R T4D4S
EAR99
N
3/93
LZS:R T4D4T
N
N
3/93
LZS:R T7
N
N
3/94
LZX:M T321
EAR99
N
3/92
LZX:M T323
EAR99
N
3/92
LZX:M T326
EAR99
N
3/92
LZX:M T3280
EAR99
N
3/92
LZX:M T3281
N
N
3/92
LZX:M T3282
EAR99
N
3/92
LZX:P T2
N
N
3/91
LZX:P T3
EAR99
N
3/91
LZX:P T52
N
N
3/91
LZX:P T57
EAR99
N
3/91
LZX:P T58
EAR99
N
3/91
LZX:R T3140
N
N
3/94
LZX:R T3145
EAR99
N
3/94
LZX:R T3146
EAR99
N
3/94
LZX:R T3147
EAR99
N
3/94
LZX:R T3150
EAR99
N
3/94
LZX:R T3157
N
N
3/94
LZX:R T4240
N
N
3/94
LZX:R T4245
EAR99
N
3/94
LZX:R T4246
EAR99
N
3/94
LZX:R T4247
N
N
3/94
Z2
on req.
2/61
20
Z23
Siemens LV 1 · 2008
20/69
LV1_20.book Seite 70 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
Conditions of sale and delivery
Export regulations
■ Terms and Conditions of Sale and Delivery
By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products, by
any Siemens entity having a registered office outside of Germany, shall be subject exclusively to the General Terms and
Conditions of the respective Siemens entity. The following terms
apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in Germany
The “General Terms of Payment” as well as the “General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry” shall apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office in Germany” shall apply.
For customers with a seat or registered office outside of
Germany
The “General Terms of Payment” as well as the “General Conditions for Supplies of Siemens, Automation and Drives for Customers with a Seat or registered Office outside of Germany” shall
apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office outside of Germany” shall apply.
20
General
The dimensions are in mm. In Germany, according to the German law on units in measuring technology, data in inches only
apply to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the corresponding pages,
- especially with regard to data, dimensions and weights given these are subject to change without prior notice.
The prices are in € (Euro) ex works, exclusive packaging.
The sales tax (value added tax) is not included in the prices.
It shall be debited separately at the respective rate according to
the applicable legal regulations.
Prices are subject to change without prior notice. We will debit
the prices valid at the time of delivery.
Surcharges will be added to the prices of products that contain
silver, copper, aluminum, lead and/or gold if the respective basic
official prices for these metals are exceeded. These surcharges
will be determined based on the official price and the metal factor of the respective product.
The surcharge will be calculated on the basis of the official price
on the day prior to receipt of the order or prior to the release
order.
The metal factor determines the official price as of which the
metal surcharges are charged and the calculation method used.
The metal factor, provided it is relevant, is included with the price
information of the respective products.
20/70
Siemens LV 1 · 2008
An exact explanation of the metal factor and the text of the
Comprehensive Terms and Conditions of Sale and Delivery are
available free of charge from your local Siemens business office
under the following Order Nos.:
• 6ZB5310-0KR30-0BA1
(for customers based in Germany)
• 6ZB5310-0KS53-0BA1
(for customers based outside Germany)
or download them from the Internet
http://www.siemens.com/automation/mall
(Germany: A&D Mall Online-Help System)
■ Export regulations
The products listed in this catalog / price list may be subject to
European / German and/or US export regulations.
Therefore, any export requiring a license is subject to approval
by the competent authorities.
According to current provisions, the following export regulations
must be observed with respect to the products featured in this
catalog / price list:
AL
Number of the German Export List
Products marked other than “N” require an
export license.
In the case of software products, the export designations of the relevant data medium must also
be generally adhered to.
Goods labeled with an “AL“ not equal to “N” are
subject to a European or German export authorization when being exported out of the EU.
ECCN
Export Control Classification Number
Products marked other than “N” are subject to a
reexport license to specific countries.
In the case of software products, the export
designations of the relevant data medium must
also be generally adhered to.
Goods labeled with an “ECCN“ not equal to “N”
are subject to a US re-export authorization.
Even without a label or with an “AL: N” or “ECCN: N”, authorization may be required due to the final destination and purpose for
which the goods are to be used.
The deciding factors are the AL or ECCN export authorization
indicated on order confirmations, delivery notes and invoices.
Errors excepted and subject to change without prior notice.
A&D/VuL_ohne MZ/En 05.09.06
LV1_20.book Seite 71 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
20
Notes
Siemens LV 1 · 2008
20/71
LV1_20.book Seite 72 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
20
Notes
20/72
Siemens LV 1 · 2008
LV1_20.book Seite 73 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
20
Notes
Siemens LV 1 · 2008
20/73
LV1_20.book Seite 74 Montag, 28. Januar 2008 12:32 12
© Siemens AG 2008
Appendix
20
Notes
20/74
Siemens LV 1 · 2008