AVK HIGH PRESSURE, 250 PSI, DRY BARREL FIRE HYDRANT 27/00
How to order - Ordering formula
AVK dry barrel hydrant is designed with a traffic flange for easy repair after collision. The hydrant’s main valve has
a ductile iron core which is fully encapsulated in EPDM rubber. The nozzle section can be
rotated 360 degrees. The upper section of the hydrant is repairable under pressure.
Product description:
Dry barrel hydrant for fire protection application
Standards:
Designed according to AWWA C502
Test/Approvals:
Hydraulic test to FM Class 1510, UL 246 and ULC CAN/ULC-5520-M91
Please fill in below points at enquiry. Please notice that some variants might not be UL/FM approved.
Hose nozzle outlets (toppart):
2 x 2½” NH/NST male thread
2 x 2½” BSP male thread
(Any different outlet nozzles to be specified later)
Pumper nozzle outlet (toppart):
4” NH/NST male thread
4½” NH/NST male thread
4” BSP male thread
(Any different outlet nozzles to be specified later)
Upper barrel:
Standard barrel
Monitor elbow with 4” PN16 flange
Monitor elbow with 3” ANSI cl. 150 flange
Monitor elbow with 4” ANSI cl. 150 flange
Standard barrel
Monitor elbow
Multi outlet barrel
Multi outlet barrel. Machined with internal BSP thread* (choose configuration below)
(Please describe required outlet couplings under the last point in the form)
1 x 4” BSP thread (center outlet) (side outlets are blind)
1 x 4” BSP thread + 2 x 2½" BSP threads
2 x 2½” BSP thread (side outlets)
(center outlet is blind)
COPYRIGHT©AVK GROUP A/S 2015 - AVK INTERNATIONAL A/S, Bizonvej 1, DK-8464 Galten - www.avkvalves.eu
Series-27_How-to-order_rev AB
AVK HIGH PRESSURE, 250 PSI, DRY BARREL FIRE HYDRANT
27/00
How to order - Ordering formula
Bury depth (H5 measure):
1.0’ (305 mm)
1.5’ (457 mm)
2.0’ (610 mm)
2.5’ (762 mm)
3.0’ (914 mm)
3.5’ (1067 mm)
4.0’ (1219 mm)
4.5’ (1372 mm)
5.0’ (1524 mm)
5.5’ (1676 mm)
6.0’ (1829 mm)
6.5’ (1981 mm)
7.0’ (2134 mm)
7.5’ (2286 mm)
8.0’ (2438 mm)
Other length _________________
Base elbow / Inlet configuration:
6” / DN 150 4” / DN 100
6” / DN 150 Elbow FF Flanged Elbow FF Flanged*
Flanged straight*
(standard)
6” / DN 150 / Ø160
PE SDR11 spigot*
Elbow flange inlet
4” / DN 100
Flanged straight*
Flanged straight inlet
PE Spigot inlet
Flange drilling (none is marked if PE spigot pipe is chosen above)
ANSI B16.5 Cl. 150 (Standard)
PN16 EN1092
Upper and lower - AISI 316
Stem rod materials:
Upper - AISI 304, Lower - epoxy coated steel (Standard)
Bolting materials:
Zink plated steel bolts (standard)
A4/316
Color:
Red RAL3000 (Standard) (1)
Other color _____________________
Additional equipment to be supplied together with the hydrant. E.g. outlet couplings, landing valves etc.
(Please specify type, material and dimension clearly)*:
__________________________________________________________________________________________________________
__________________________________________________________________________________________________________
__________________________________________________________________________________________________________
*NOT UL/ULC LISTED OR FM APPROVED
(1) The red UV-resistant polyester top coat is only applied to the above ground parts and max. 200 mm below the bury line.
Lower parts are blue epoxy coated.
COPYRIGHT©AVK GROUP A/S 2015 - AVK INTERNATIONAL A/S, Bizonvej 1, DK-8464 Galten - www.avkvalves.eu
Series-27_How-to-order_rev AB
AVK HIGH PRESSURE, 250 PSI, DRY BARREL FIRE HYDRANT
27/00
AVK
HIGH
PRESSURE,
UL/FM
approved,
modern type 250 PSI, DRY BARREL FIRE HYDRANT 27/00
001
How to order - Ordering formula
AVK HIGH PRESSURE, 250 PSI, DRY BARREL FIRE HYDRANT
19
UL/FM approved,
modern type
787
mm
508
mm
787
mm
H5
508
mm
33
18
32
17
31
16
30
15
19
14
9
21
8
8
20
14
22
21
86,2 mm
8
344 mm
20
5
14
34
4
3
26
2
25
1
24
12
23
8
Component
11List:
H5
86,2 mm
344 mm
34
500
mm
256
mm
1. Main valve disc
Ductile iron w. EPDM rubber
2. Base gasket
NBR rubber
3. Lower seat O-ring
NBR rubber
4. Drain bushing
Bronze
5. Valve seat ring
Bronze
6. Upper seat O-ring
NBR rubber
7. Lower barrel O-ring
NBR rubber
8. Standpipe flange
Ductile iron
9. Lock ring List:
Component
PE Spigot inlet
444,5
mm
51 mm
200 mm
715 mm
Flanged straight inlet
Monitor elbow
Stainless steel
10. Thr. rod/nut
11. Breakable flange
Ductile iron
12. Bolt and nut
Zinc plated steel / st. steel
13.
Screwvalve disc
1. Main
Stainless
steel
Ductile
iron
w. EPDM rubber
14.
Seat removal/lock
pin
2. Base
gasket
Stainless
steel
NBR
rubber
15.
O-ringsseat O-ring
3. Lower
NBR rubber
16.
Stop nut
4. Drain
bushing
Zinc plated steel
Bronze
17.
Stem seat
nut ring
5. Valve
Bronze
18.
Anti friction
washer
6. Upper
seat O-ring
Polyamide
NBR
rubber
19.
Weather
shield
7. Lower
barrel
O-ring
Grey rubber
cast iron
NBR
20.
Base
8. Standpipe
flange
Ductile iron
21.
Lowerring
barrel
9. Lock
Ductile iron
Stainless
steel
22. Thr.
Lower
stem rod
10.
rod/nut
Epoxy
coated
steel
Zinc
plated
steel
/ st./ AISI
steel 316
23. Breakable flange
coupling
11.
Stainless
steel
Ductile
iron
24. Bolt
Barrel
gasket
12.
and
nut
NBR plated
rubbersteel / st. steel
Zinc
25. Screw
Upper barrel
13.
Ductile iron
Stainless
steel
26. Seat
Upperremoval/lock
stem rod pin
14.
Stainless steel
27.
chain
15. Cap
O-rings
Plated
steel
NBR rubber
28.
O-ring
16. Nozzle
Stop nut
NBR
rubbersteel
Zinc plated
29.
17. Nozzle
Stem nut
Bronze
30.
gasket washer
18. Cap
Anti friction
NBR
rubber
Polyamide
31.
19. Cap
Weather shield
Cast
Grey iron
cast iron
32.
20. Nozzle
Base section
Ductile iron
33.
nut
21. Thrust
Lower barrel
Bronze
Ductile iron
34.
lock screw
22. Nozzle
Lower stem
rod
Stainless
steel steel / AISI 316
Epoxy coated
23. Breakable coupling
Stainless steel
24. Barrel gasket
NBR rubber
25. Upper barrel
Ductile iron
26. Upper stem rod
Stainless steel
27. Cap chain
Plated steel
28. Nozzle O-ring
NBR rubber
Reference Nos. and Dimensions:
AVK ref. nos
29. Nozzle
27-00-O0204-00008-CP
31. Cap
27-00-O0205-00008-CP
33. Thrust nut
Bronze
Cast iron
Bronze
DN
mm
H3
mm
H5
mm
150
150
1701
1854
914
1067
001
7
5
10
4
9
3
8
2
H5 7
1
6
mm
10
9
9
9
200
mm
31
26
30
25
29
24
28 51 mm
23
200
27
15
12
14
8
13
11
22
6
28
33
27
32
18
13
17
10
16
9
10
H5
29
27/00
L
Theoretical
Cap gasket
mm 30. weight
kg
343 32. Nozzle
154 section
343
163
34. Nozzle lock screw
Zinc plated steel / st. steel
NBR rubber
Ductile iron
Stainless steel
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Reference Nos. and Dimensions:
Version no. 60 - 9-4-2014 9:14
AVK ref. nos
DN
mm
H3
mm
H5
mm
L 2/3Theoretical
mm
weight kg
27-00-O0204-00008-CP
150
1701
914
343
154
27-00-O0205-00008-CP
150
1854 1, 1067
343- www.avkvalves.eu
163
COPYRIGHT©AVK
GROUP A/S 2015 - AVK INTERNATIONAL
A/S, Bizonvej
DK-8464 Galten
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
Series-27_How-to-order_rev AB
AVK HIGH PRESSURE, 250 PSI, DRY BARREL FIRE HYDRANT
27/00
How to order - Ordering formula
Top part
Upper barrel
Bury line
Lower barrel
Base elbow / Inlet
COPYRIGHT©AVK GROUP A/S 2015 - AVK INTERNATIONAL A/S, Bizonvej 1, DK-8464 Galten - www.avkvalves.eu
Series-27_How-to-order_rev AB