3 COMPLETE TURNS
7
0
7
0
x
x
2
0
0
x
2
0
0
x
0
0
2
4 POINT BARBS SPACED AT 75mm APART
0
2 PLY 0
/ 2.5 STEEL WIRE WITH
CHAIN LINK FENCING TO BE THERMAL SEALED
LINE WIRE
7
CUT ENDS OF PLASTIC COATED GALVANISED WIRE
2
6
x
x
75 75 75 75
x
STIRRUP WIRE
45
150
EXTENSION ARM
0 10 HOLE
/
TO 44x44x5 M.S. ANGLE
820
800
EXTENSION ARM
700
50
25
3.0m
x
51x51x6 M.S. ANGLE WELDED
TO 51x51x6 M.S. ANGLE
44x44x5 M.S. ANGLE WELDED
TO BE THREADED THROUGH CHAIN LINK MESH
MAX.
0
/ 3.55 PLASTIC COATED
6
2
0
x
x
x
0
5
7
5
45
3.0m
0
0
2
5
2
0
0
7
x
2
0
0
5
SEE DETAIL V
2 NOS. LINE WIRE ( SEE TABLE 1 )
3 NUMBERS M 13/ 0 BOLTS
MAX.
DETAIL X : STIRRUP FIXING
BARBED WIRE
IN CONCRETE POST
LINE WIRE TO BE THREADED THROUGH CHAIN LINK MESH
0 6 STIRRUP AT 300 CRS
/
TYING WIRES AT 450 CRS FOR SECURING
800
2400
)
CHAIN LINK FENCING
CORNER POST
M 8 0 BOLT SECURING CLAMP BARS
700
STRUT ( 200x100x3.25m )
2450
R.C.
WIRE DIA. 3.55mm
( SEE TABLE 1
/
2890
2890
SCALE 1 : 5
CHAIN LINK FENCING
MESH SIZE 50mm
CHAIN LINK MESH
25
100
25
CHAIN LINK FENCING TO LINE WIRE
CHAIN LINK MESH SECURED BY
(150 CRS FOR TOP & BOTTOM LINE WIRE)
LINE WIRE TO BE THREADED
CORNER POST
25x5 M.S. FLAT CLAMP BARS
3200
THROUGH CHAIN LINK MESH
0 6 STIRRUP
/
4 NUMBERS
AT 300 CRS
0 10 BARS
/
4 NUMBERS/0 10 BARS
STRUT ( 100x100x3.25m )
700
SEE DETAIL W
R.C.
R.C. INTERMEDIATE POST
WIRE STIRRUP PASSED THROUGH
( 125x100x3.2m )
800
R.C. CORNER POST
( 150x150x3.2m )
TO THE WIRE WITH 3 COMPLETE
R.C. INTERMEDIATE POST
R.C. STRAINING POST
LINE WIRE TO BE
( 125x100x3.2m )
R.C. STRUT
TURNS ON EACH SIDE OF POST
(100x100x3.25m)
( SEE DETAIL X )
( 150x150x3.2m )
150
THREADED THROUGH
25
CHAIN LINK MESH
20mm COVER TO
25
CONCRETE 450x450x800 DEEP
75
75
75
800
750
800
800
750
800
800
0
5
2
75
250
ELEVATION
ARRANGEMENT OF CONCRETE POSTS AT CORNER
REINFORCING BARS
75
45
45
A HOLE IN POST AND SECURED
75
CONCRETE POSTS
150x150
100x125
450x450
600x300
INTERMEDIATE POST
CORNER AND STRAINING POSTS
PILES AND FOUNDATION TO ENGINEER’S DETAILS
PLAN A-A
CHAIN LINK FENCE WITH CONCRETE POSTS
DETAIL OF FIXING STRUTS TO CONCRETE POSTS
SCALE 1 : 10
CUT ENDS OF PLASTIC COATED GALVANISED WIRE
x
0
6
2
6
2
0
0
x
7
0
CHAIN LINK FENCING TO BE THERMAL SEALED
76 x 76 x 6 M.S. ANGLE
2
x
x
0
64x64x5 M.S. ANGLE
SEE DETAIL V
25
0
x
x
50
LOCKING NUT
0
76x76x6 M.S. ANGLE
45
2
10 x 100 GALV. M.S. EYE BOLT
45
BARBED WIRE
M5 STAINLESS STEEL
TURNBUCKLE
2 NOS. LINE WIRE ( SEE TABLE 1
6mm THICK M.S. PLATE
)
820
OR LINE WIRE
800
3.0m
MAX.
BARBED WIRE
WELDED AT ENDS
TO BE THREADED THROUGH CHAIN LINK MESH
3.0m
MAX.
BARBED WIRE
64x64x6 M.S. ANGLE
OR LINE WIRE
LINE WIRE TO BE THREADED THROUGH CHAIN LINK MESH
SEE DETAIL Y
2890
2940
CHAIN LINK FENCE
CHAIN LINK FENCING
)
DETAIL V : FIXING STRAINING LINE WIRE & BARBED WIRE
2450
WIRE DIA. 3.55mm
( SEE TABLE 1
TYING WIRES AT 450 CRS FOR SECURING
800
2400
MESH SIZE 50mm
CHAIN LINK FENCING TO LINE WIRE
SEE DETAIL Z
SCALE 1 : 3
(150 CRS FOR TOP & BOTTOM LINE WIRE)
3200
76x76x6 M.S. ANGLE
LINE WIRE TO BE THREADED
2450x25x5 CLAMP BAR
SEE DETAIL V
800
THROUGH CHAIN LINK MESH
INTERMEDIATE POST
CORNER POST
CONCRETE POST
10 x 245 GALV. M.S. EYE BOLT
44x44x5 M.S. STRUT
INTERMEDIATE POST
LENGTH 3.15m
44x44x5 M.S. STRUT
M5 STAINLESS STEEL
STRAINING POST
TURNBUCKLE
LENGTH 3.15m
LINE WIRE TO BE
25
THREADED THROUGH
CHAIN LINK MESH
LOCKING NUT
800
CHAIN LINK FENCE
0
0
3
800
250
750
800
0 13 INTERNAL GALV. M.S. SLEEVE
/
75
75
75
75
STEEL POSTS
450x450
450x450
600x300
450x450
DETAIL W : FIXING STRAINING LINE WIRE
PILES AND FOUNDATION TO ENGINEER’S DETAILS
INTERMEDIATE POST
CORNER AND STRAINING POSTS
SCALE 1 : 3
CHAIN LINK FENCE WITH STEEL POSTS
NOTES:
1.
2.3M (MIN.)
CORNER POST
EXCEPT WHERE OTHERWISE MODIFIED THE CHAIN LINK FENCE SHALL
GENERALLY BE IN ACCORDANCE WITH B.S. 172 2 PART 10 AND B. S. 4102.
76x76x6 M.S. ANGLE
2. THE CHAIN LINK FENCING SHALL BE OF 5 0mm WIRE MESH TO A NET
M10 /
0 STEEL BOLT
CHAIN LINK
GAUGE OF 3.55mm DIA. AND GALVANISED.
FENCING
3. ALL POSTS SHALL BE SPACED AT NOT MORE THAN 3 METRES APART.
44x44x5 M.S. STRUT
WELDED
4. STRAINING POSTS SHALL BE SPACED EQUA LLY AND PROVIDED AT ALL ENDS
WELDED TO 150x150x5
STEEL POST
AND CORNERS, AT CHANGES IN DIRECTION ORACUTE VARIATIONS IN
M.S. PLATE
2.3M (MIN.)
1000
2.3M (MIN.)
CHAIN LINK FENCING
LEVEL AND AT INTERVALS NOT
EXCEEDING EVERY TEN POST IN STRAIGHT
LENGTHS OF FENCE THAT IS 30 METRES.
M8 0
/
STEEL BOLT
PLASTIC COATED GALVANISED
0
/
WIRE CHAIN LINK FENCING
2.3M (MIN.)
OUTSIDE DIA.
CHAIN LINK FENCING
STIRRUP WIRE
CORE DIA.
mm
mm
INTERMEDIATE
LINE WIRE
4.75
STAINLESS METAL.
44x44x5 M.S. ANGLE
PLASTIC COATED
CHAIN LINK FENCING
5. ALL BOLTS, NUTS, STAPLES AND WASHERS SHALL BE PLATED OR COATED WITH
5 HALF ROUND
STAPLES OR/0 2.5
POST
3.55
6.
LINE WIRE SHALL BE TO A NET GAUGE OF 3.55mm DIA.
AND GALVANISED.
7. THE BARBED WIRE SHALL CONSIST OF 2 PLY DIA. 2.5mm STEEL WIRE WITH
76x76x6
4 POINT BARBS SPACED AT 75mm APART AND GALVANISED.
M.S. ANGLE
25x5
8. ALL M.S. POSTS, STRUTS, ETC. SHALL B
E HEAVILY GALVANISED BY THE HOT
CLAMP BAR
DIP PROCESS AFTER FABRICATION.
POSITION AND TYPE OF GATE
LINE WIRE
4.75
3.55
3.55
2.50
2.00
1.40
DEPENDING ON LOCATION
9. 25mm x 5mm CLAMP BARS TO BE USED ON ALL STRAINING POSTS FOR
AND SIZE OF PLANT
STIRRUP WIRE
ELEVATION
HOLDING DOWN THE WIRE MESH.
PLAN
END ELEVATION
FRONT VIEW
TYING WIRE
DETAIL FOR SECURING LINE WIRE TO STEEL POST
SCALE : FULL SIZE
TYPICAL SITE PLAN OF CHAIN LINK FENCE
SCALE
1
:
100
10. ALL LINE WIRES CHAIN LINK FENCING AND BARBED WIRES SHALL BE
DETAIL Z
DETAIL Y : FIXING STRUTS TO STEEL POSTS
SCALE : FULL SIZE
SCALE
1
:
2
PROPERLY STRAINED.
11. ALL STRUCTURES ABOVE GROUND TO BE AT LEAST 2.3 METRES CLEAR
OFF ALL BOUNDARIES.
TABLE 1 : SIZES OF WIRE
12. ALL CONCRETE TO BE GRADE 25 AND ABOVE UNLESS OTHERWISE SPECIFIED.
SCALES
ISSUED BY WATER RECLAMATION (NETWORK) DEPARTMENT
ON APR ’05
1 : 20
UNLESS
OTHERWISE
STATED
[ ORIGINAL BORDER SIZE 810mm X 565mm ]
STANDARD 2.4 METRES HIGH CHAIN LINK FENCE
Water for All:Conserve,Value,Enjoy
WATER RECLAMATION (NETWORK) DEPARTMENT
DRG. NO.
PUB/WRN/STD/105