TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
•
•
•
•
•
•
Excellent Output Drive Capability
VO = ± 2.5 V Min at RL = 100 Ω,
VCC± = ± 5 V
VO = ± 12.5 V Min at RL = 600 Ω,
VCC± = ± 15 V
Low Supply Current
280 µA Typ Per Amplifier
High Unity-Gain Bandwidth . . . 2 MHz Typ
High Slew Rate . . . 3.4 V/µs Typ
•
•
•
•
Macromodels Included
Wide Operating Supply Voltage Range
VCC ± = ± 3.5 V to ± 19 V
High Open-Loop Gain . . . 230 V/mV Typ
Low Offset Voltage . . . 1 mV Max
Low Offset Voltage Drift With Time
0.04 µV/mo Typ
Low Input Bias Current . . . 4 pA Typ
description
MAXIMUM PEAK-TO-PEAK
OUTPUT VOLTAGE SWING
vs
LOAD RESISTANCE
The TLE2062, TLE2062A, TLE2062B, and
TLE2062Y are JFET-input, low power, precision
dual operational amplifiers manufactured using
Texas Instruments Excalibur process. These
devices combine outstanding output drive
capability with low power consumption, excellent
dc precision, and wide bandwidth.
10
VCC ± = ± 5 V
TA = 25°C
VO(PP) – Maximum Peak-to-Peak
Output Voltage Swing – V
8
In addition to maintaining the traditional JFET
advantages of fast slew rates and low input bias
and offset currents, the Excalibur process offers
outstanding parametric stability over time and
temperature. This results in a precision device
remaining precise even with changes in
temperature and over years of use.
The TLE2062, TLE2062A, and TLE2062B are
ideal choices for any application requiring
excellent dc precision, high output drive, wide
bandwidth, and low power consumption.
6
4
2
0
10
100
1k
10 k
RL – Load Resistance – Ω
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
0C
0°C
to
70°C
1 mV
2 mV
4 mV
– 40°C
40 C
to
85°C
– 55°C
to
125°C
SMALL OUTLINE
(D)
CHIP FORM
(Y)
CHIP CARRIER
(FK)
CERAMIC DIP
(JG)
PLASTIC DIP
(P)
TLE2062BCD
TLE2062ACD
TLE2062CD
—
—
—
—
—
—
TLE2062BCP
TLE2062ACP
TLE2062CP
—
—
TLE2062Y
1 mV
2 mV
4 mV
TLE2062BID
TLE2062AID
TLE2062ID
—
—
—
—
—
—
TLE2062BIP
TLE2062AIP
TLE2062IP
—
—
—
1 mV
2 mV
4 mV
TLE2062BMD
TLE2062AMD
TLE2062MD
TLE2062BMFK
TLE2062AMFK
TLE2062MFK
TLE2062BMJG
TLE2062AMJG
TLE2062BMJG
TLE2062BMP
TLE2062AMP
TLE2062BMP
—
—
—
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2062ACDR). Chips are tested at 25
°C.
Copyright  1994, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–167
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
description (continued)
A variety of available package options includes small-outline and chip-carrier versions for high-density system
applications.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from – 40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of – 55°C to 125°C.
1
8
2
7
3
6
4
5
VCC +
2OUT
2IN –
2IN +
NC
1IN –
NC
1IN+
NC
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
VCC –
NC
2IN+
NC
1OUT
1IN –
1IN +
VCC –
FK PACKAGE
(TOP VIEW)
NC
1OUT
NC
VCC +
NC
D, JG, OR P PACKAGE
(TOP VIEW)
NC – No internal connection
symbol
IN +
+
IN –
–
OUT
5–168
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
NC
2OUT
NC
2IN –
NC
Q1
Q2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Q6
Q5
R4
55 kΩ
15 pF
C1
Q3
C2
15 pF
R2
1.1 kΩ
Q8
R3
2.4 kΩ
Q7
Component values are nominal.
R1
1.1 kΩ
IN –
IN +
Q4
R5
60 kΩ
Q10
Q14
Q13
Q12
Q15
C3
5.3 pF
Q11
Q9
equivalent schematic (each channel)
Q16
VCC –
Q24
2.7 kΩ
R6
Q28
Q26
Q23
Q25
Transistors
Resistors
Diodes
Capacitors
42
9
2
3
ACTUAL DEVICE
COMPONENT COUNT
Q22
Q21
Q20
Q17
Q19
Q18
VCC +
Q27
R7
600 Ω
Q29
Q31
Q30
D1
D2
Q34
Q33
Q32
Q38
Q37
Q36
Q35
Q40
Q39
Q41
R9
100 Ω
20 Ω
R8
Q42
OUT
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µ POWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
5–169
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TLE2062Y chip information
This chip, when properly assembled, displays characteristics similar to the TLE2062. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive
epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(8)
(1)
(7)
1IN +
1IN –
2OUT
(3)
(2)
(7)
VCC+
(8)
+
(1)
1OUT
–
+
–
(5)
(6)
2IN +
2IN –
(4)
VCC –
75
(2)
(6)
CHIP THICKNESS: 15 TYPICAL
BONDING PADS: 4 × 4 MINIMUM
TJmax = 150°C
TOLERANCES ARE ± 10%.
ALL DIMENSIONS ARE IN MILS.
(3)
(5)
(4)
73
5–170
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PIN (4) IS INTERNALLY CONNECTED
TO BACKSIDE OF THE CHIP.
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 V
Supply voltage, VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 19 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 38 V
Input voltage, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± VCC
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA
Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Total current out of VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC – .
2. Differential voltages are at IN+ with respect to IN –.
3. The output may be shorted to either supply. Temperatures and/or supply voltages must be limited to ensure that the maximum
dissipation rate is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
D
725 mW
5.8 mW/°C
464 mW
377 mW
145 mW
FK
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
JG
1050 mW
8.4 mW/°C
672 mW
546 mW
210 mW
P
1000 mW
8.0 mW/°C
640 mW
520 mW
200 mW
recommended operating conditions
Supply voltage, VCC ±
Common-mode input voltage
voltage, VIC
VCC ± = ± 5 V
VCC ± = ± 15 V
Operating free-air temperature, TA
POST OFFICE BOX 655303
C SUFFIX
I SUFFIX
M SUFFIX
MIN
MAX
MIN
MAX
MIN
MAX
± 3.5
± 18
± 3.5
± 18
± 3.5
± 18
– 1.6
4
– 1.6
4
– 1.6
4
– 11
13
– 11
13
– 11
13
0
70
– 40
85
– 55
125
• DALLAS, TEXAS 75265
UNIT
V
V
°C
5–171
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2062C
TLE2062AC
TLE2062BC
MIN
25°C
TLE2062C
VIO
I
Input
offset
ff
voltage
l
Temperature coefficient of input offset voltage
Input offset current
IIB
Input bias current
VICR
RS = 50 Ω
VIC = 0
0,
µV/°C
25°C
0.04
µV/mo
25°C
1
VO = ± 2
2.8
8V
V,
L
i
l diff
differential
i l voltage
l
amplification
lifi i
Large-signal
RL = 10 kΩ
3
Full range
– 1.6
to
4
25°C
3.5
Full range
3.3
25°C
2.5
VO = 0 to 2 V
V,
RL = 100 Ω
VO = 0 to – 2 V,
V
RL = 100 Ω
–2
to
6
nA
pA
2
– 1.6
to
4
nA
V
V
3.7
3.1
V
2
25°C
– 3.7
Full range
– 3.3
25°C
– 2.5
Full range
–2
25°C
15
Full range
pA
0.8
25°C
Full range
RL = 100 Ω
3
6
Full range
Common-mode input voltage range
M i
i peak
k output voltage
l
swing
i
Maximum
negative
mV
V
3.9
25°C
RL = 10 kΩ
AVD
0.7
Full range
Full range
M i
i i peakk output voltage
l
i
Maximum
positive
swing
4
4.9
Full range
RL = 100 Ω
VOM –
0.9
25°C
RL = 10 kΩ
VOM +
5
Full range
Input offset voltage long-term drift (see Note 4)
IIO
MAX
1
5.9
25°C
TLE2062BC
αVIO
TYP
Full range
TLE2062AC
UNIT
– 3.9
– 2.7
V
80
2
25°C
0.75
Full range
0.5
25°C
0.5
Full range
0.25
45
V/ V
V/mV
3
ri
Input resistance
25°C
1012
Ω
ci
Input capacitance
25°C
4
pF
zo
Open-loop output impedance
IO = 0
25°C
560
Ω
CMRR
Common-mode rejection ratio
VIC = VICRmin
min, RS = 50 Ω
kSVR
Supply-voltage rejection ratio (∆VCC ± /∆VIO)
VCC ± = ± 5 V to ± 15 V,,
RS = 50 Ω
25°C
65
Full range
65
25°C
75
Full range
75
82
93
dB
dB
† Full range is 0°C to 70°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150 °C extrapolated
to TA = 25 °C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
5–172
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
TA†
TLE2062C
TLE2062AC
TLE2062BC
MIN
ICC
∆ICC
25°C
Supply current
VO = 0
0,
Supply-current
pp y
change
g over operating
p
g
temperature range
N load
l d
No
UNIT
TYP
MAX
560
620
Full range
635
Full range
µA
µA
26
† Full range is 0°C to 70°C.
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
SR
Slew rate at unity gain (see Figure 1)
Vn
Equivalent input noise voltage (see Figure 2)
VN(PP)
In
Peak-to-peak equivalent input noise voltage
Equivalent input noise current
THD
Total harmonic distortion
VO(PP) = 2 V,
AVD = 2,
B1
Unity-gain bandwidth (see Figure 3)
Settling time
BOM
Maximum output-swing bandwidth
φm
Phase margin at unity gain (see Figure 3)
TA†
TLE2062C
TLE2062AC
TLE2062BC
MIN
TYP
25°C
2.2
3.4
Full range
2.1
UNIT
MAX
RL = 10 kΩ
kΩ,
CL = 100 pF
f = 10 Hz,
RS = 20 Ω
25°C
59
100
f = 1 kHz,
RS = 20 Ω
25°C
43
60
f = 0.1 Hz to 10 Hz
25°C
1.1
f = 1 kHz
25°C
1
RL = 10 kΩ,
f = 10 kHz
25°C
0 025%
0.025%
RL = 10 kΩ,
CL = 100 pF
25°C
1.8
RL = 100 Ω,
CL = 100 pF
25°C
1.3
0.1%
25°C
5
0.01%
25°C
10
AVD = 1,
RL = 10 kΩ,
RL = 10 kΩ
25°C
140
CL = 100 pF
25°C
58°
RL = 100 Ω,
CL = 100 pF
25°C
75°
V/µs
nV/√Hz
µV
fA/√Hz
MHz
µs
kHz
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–173
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2062C
TLE2062AC
TLE2062BC
MIN
25°C
TLE2062C
VIO
I
Input
offset
ff
voltage
l
RS = 50 Ω
Input offset current
IIB
Input bias current
VICR
VOM +
L
i
l diff
differential
i l voltage
l
amplification
lifi i
Large-signal
ri
Input resistance
ci
Input capacitance
zo
Open-loop output impedance
1.9
0.04
µV/mo
25°C
2
4
Full range
– 11
to
13
25°C
13.2
25°C
Full range
25°C
Full range
VO = ± 1
100 V,
V
RL = 10 kΩ
VO = 0 to 8 V
V,
RL = 600 Ω
VO = 0 to – 8 V,
V
RL = 600 Ω
12.5
CMRR
Common-mode rejection ratio
min, RS = 50 Ω
VIC = VICRmin
kSVR
Supply-voltage rejection ratio (∆VCC ± /∆VIO)
VCC ± = ± 5 V to ± 15 V,,
RS = 50 Ω
nA
V
V
13.7
13
13.2
V
12
– 13.2
– 13.7
– 13
– 12.5
– 13
V
– 12
25°C
30
Full range
20
25°C
25
Full range
10
25°C
3
Full range
1
230
100
V/ V
V/mV
25
1012
Ω
25°C
4
pF
25°C
560
Ω
25°C
IO = 0
– 12
to
16
nA
pA
3
25°C
Full range
pA
1
– 11
to
13
25°C
RL = 600 Ω
1
25°C
Full range
M i
i peak
k output voltage
l
swing
i
Maximum
negative
mV
V
µV/°C
Common-mode input voltage range
M i
i i peakk output voltage
l
i
Maximum
positive
swing
2
6
Full range
25°C
RL = 10 kΩ
AVD
Full range
Full range
RL = 600 Ω
VOM –
0.5
Full range
RL = 10 kΩ
4
2.9
25°C
Input offset voltage long-term drift (see Note 4)
IIO
0.8
Full range
VIC = 0
0,
MAX
4.9
25°C
TLE2062AC
Temperature coefficient of input offset voltage
0.9
Full range
TLE2062BC
αVIO
TYP
UNIT
25°C
72
Full range
70
25°C
75
Full range
75
90
93
dB
dB
† Full range is 0°C to 70°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150 °C extrapolated
to TA = 25 °C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
5–174
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
TA†
TLE2062C
TLE2062AC
TLE2062BC
MIN
ICC
Supply current
∆ICC
Supply current change over operating
Supply-current
temperature range
25°C
V
VO = 0 V,
N load
l d
No
UNIT
TYP
MAX
625
690
Full range
715
Full range
µA
µA
36
† Full range is 0°C to 70°C.
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
TEST CONDITIONS
SR
Slew rate at unity gain (see Figure 1)
Vn
Equivalent input noise voltage (see Figure 2)
VN(PP)
In
Peak-to-peak equivalent input noise voltage
TA†
TLE2062C
TLE2062AC
TLE2062BC
MIN
TYP
25°C
2.6
3.4
Full range
2.5
UNIT
MAX
RL = 10 kΩ
kΩ,
CL = 100 pF
f = 10 Hz,
RS = 20 Ω
25°C
70
100
f = 1 kHz,
RS = 20 Ω
25°C
40
60
f = 0.1 Hz to 10 Hz
25°C
1.1
µV
Equivalent input noise current
f = 1 kHz
25°C
1.1
fA/√Hz
THD
Total harmonic distortion
VO(PP) = 2 V,
AVD = 2,
RL = 10 kΩ,
f = 10 kHz
25°C
0 025%
0.025%
B1
Unity-gain bandwidth (see Figure 3)
RL = 10 kΩ,
CL = 10 0 pF
25°C
2
RL = 600 Ω,
CL = 100 pF
25°C
1.5
Settling time
BOM
φm
Maximum output-swing bandwidth
Phase margin at unity gain (see Figure 3)
0.1%
25°C
5
0.01%
25°C
10
AVD = 1,
RL = 10 kΩ,
RL = 10 kΩ
25°C
40
CL = 100 pF
25°C
60°
RL = 600 Ω,
CL = 100 pF
25°C
70°
V/µs
nV/√Hz
MHz
µs
kHz
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–175
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2062I
TLE2062AI
TLE2062BI
MIN
25°C
TLE2062I
VIO
I
Input
offset
ff
voltage
l
Temperature coefficient of input offset voltage
Input offset current
IIB
Input bias current
VICR
RS = 50 Ω
VIC = 0
0,
µV/°C
25°C
0.04
µV/mo
25°C
1
VO = ± 2
2.8
8V
V,
L
Large-signal
i
l diff
differential
i l voltage
l
amplification
lifi i
RL = 10 kΩ
3
Full range
– 1.6
to
4
25°C
3.5
Full range
3.1
25°C
2.5
VO = 0 to 2 V
V,
RL = 100 Ω
VO = 0 to – 2 V,
V
RL = 100 Ω
ri
Input resistance
ci
Input capacitance
zo
Open-loop output impedance
IO = 0
CMRR
Common-mode rejection ratio
VIC = VICRmin
min, RS = 50 Ω
kSVR
Supply-voltage rejection ratio (∆VCC ± /∆VIO)
VCC ± = ± 5 V to ± 15 V,,
RS = 50 Ω
–2
to
6
nA
pA
4
– 1.6
to
4
nA
V
V
3.7
3.1
V
2
25°C
– 3.7
Full range
– 3.1
25°C
– 2.5
Full range
–2
25°C
15
Full range
pA
2
25°C
Full range
RL = 100 Ω
3
6
Full range
Common-mode input voltage range
M i
Maximum
negative
i peak
k output voltage
l
swing
i
mV
V
4.3
25°C
RL = 10 kΩ
AVD
0.7
Full range
Full range
M i
i i peakk output voltage
l
i
Maximum
positive
swing
4
5.3
Full range
RL = 100 Ω
VOM –
0.9
25°C
RL = 10 kΩ
VOM +
5
Full range
Input offset voltage long-term drift (see Note 4)
IIO
MAX
1
6.3
25°C
TLE2062BI
αVIO
TYP
Full range
TLE2062AI
UNIT
– 3.9
– 2.7
V
80
2
25°C
0.75
Full range
0.5
25°C
0.5
Full range
0.25
45
V/ V
V/mV
3
1012
Ω
25°C
4
pF
25°C
560
Ω
25°C
25°C
65
Full range
65
25°C
75
Full range
65
82
93
dB
dB
† Full range is – 40°C to 85°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150 °C extrapolated
to TA = 25 °C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
5–176
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
TA†
TLE2062I
TLE2062AI
TLE2062BI
MIN
ICC
∆ICC
25°C
Supply current
VO = 0
0,
Supply-current
pp y
change
g over operating
p
g
temperature range
N load
l d
No
UNIT
TYP
MAX
560
620
Full range
640
Full range
µA
µA
54
† Full range is – 40°C to 85°C.
operating characteristics at specified free-air temperature, VCC ± = ±5 V
PARAMETER
TEST CONDITIONS
SR
Slew rate at unity gain (see Figure 1)
Vn
Equivalent input noise voltage (see Figure 2)
VN(PP)
In
Peak-to-peak equivalent input noise voltage
Equivalent input noise current
THD
Total harmonic distortion
VO(PP) = 2 V,
AVD = 2,
B1
Unity-gain bandwidth (see Figure 3)
Settling time
BOM
Maximum output-swing bandwidth
φm
Phase margin at unity gain (see Figure 3)
TA†
TLE2062I
TLE2062AI
TLE2062BI
MIN
TYP
25°C
2.2
3.4
Full range
1.7
UNIT
MAX
RL = 10 kΩ
kΩ,
CL = 100 pF
f = 10 Hz,
RS = 20 Ω
25°C
59
100
f = 1 kHz,
RS = 20 Ω
25°C
43
60
f = 0.1 Hz to 10 Hz
25°C
1.1
f = 1 kHz
25°C
1
RL = 10 kΩ,
f = 10 kHz
25°C
0 025%
0.025%
RL = 10 kΩ,
CL = 100 pF
25°C
1.8
RL = 100 Ω,
CL = 100 pF
25°C
1.3
0.1%
25°C
5
0.01%
25°C
10
AVD = 1,
RL = 10 kΩ,
RL = 10 kΩ
25°C
140
CL = 100 pF
25°C
58°
RL = 100 Ω,
CL = 100 pF
25°C
75°
V/µs
nV/√Hz
µV
fA/√Hz
MHz
µs
kHz
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–177
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2062I
TLE2062AI
TLE2062BI
MIN
25°C
TLE2062I
VIO
I
Input
offset
ff
voltage
l
Temperature coefficient of input offset voltage
Input offset current
IIB
Input bias current
VICR
RS = 50 Ω
VIC = 0
0,
µV/°C
25°C
0.04
µV/mo
25°C
2
4
Full range
– 11
to
13
25°C
13.2
Full range
25°C
Full range
25°C
VO = ± 1
100 V,
V
L
Large-signal
i
l diff
differential
i l voltage
l
amplification
lifi i
Full range
RL = 10 kΩ
VO = 0 to 8 V
V,
RL = 600 Ω
VO = 0 to – 8 V,
V
RL = 600 Ω
ri
Input resistance
ci
Input capacitance
zo
Open-loop output impedance
IO = 0
CMRR
Common-mode rejection ratio
VIC = VICRmin
min, RS = 50 Ω
kSVR
Supply-voltage rejection ratio (∆VCC ± /∆VIO)
VCC ± = ± 5 V to ± 15 V,,
RS = 50 Ω
– 12
to
16
nA
V
V
13.7
13
12.5
nA
pA
5
– 11
to
13
25°C
pA
3
25°C
Full range
RL = 600 Ω
1
6
Full range
Common-mode input voltage range
M i
Maximum
negative
i peak
k output voltage
l
swing
i
mV
V
2.3
25°C
RL = 10 kΩ
AVD
0.5
Full range
Full range
M i
i i peakk output voltage
l
i
Maximum
positive
swing
2
3.3
Full range
RL = 600 Ω
VOM –
0.8
25°C
RL = 10 kΩ
VOM +
4
Full range
Input offset voltage long-term drift (see Note 4)
IIO
MAX
0.9
5.3
25°C
TLE2062BI
αVIO
TYP
Full range
TLE2062AI
UNIT
13.2
V
12
– 13.2
– 13.7
– 13
– 12.5
– 13
V
– 12
25°C
30
Full range
20
25°C
25
Full range
10
25°C
3
Full range
1
230
100
V/ V
V/mV
25
1012
Ω
25°C
4
pF
25°C
560
Ω
25°C
25°C
72
Full range
65
25°C
75
Full range
65
90
93
dB
dB
† Full range is – 40°C to 85°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150 °C extrapolated
to TA = 25 °C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
5–178
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
TA†
TLE2062I
TLE2062AI
TLE2062BI
MIN
ICC
∆ICC
25°C
Supply current
VO = 0
0,
Supply-current
pp y
change
g over operating
p
g
temperature range
N load
l d
No
UNIT
TYP
MAX
625
690
Full range
720
Full range
µA
µA
74
† Full range is – 40°C to 85°C.
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
TEST CONDITIONS
SR
Slew rate at unity gain (see Figure 1)
Vn
Equivalent input noise voltage (see Figure 2)
VN(PP)
In
Peak-to-peak equivalent input noise voltage
Equivalent input noise current
THD
Total harmonic distortion
VO(PP) = 2 V,
AVD = 2,
B1
Unity-gain bandwidth (see Figure 3)
Settling time
BOM
Maximum output-swing bandwidth
φm
Phase margin at unity gain (see Figure 3)
TA†
TLE2062I
TLE2062AI
TLE2062BI
MIN
TYP
25°C
2.6
3.4
Full range
2.1
UNIT
MAX
RL = 10 kΩ
kΩ,
CL = 100 pF
f = 10 Hz,
RS = 20 Ω
25°C
70
100
f = 1 kHz,
RS = 20 Ω
25°C
40
60
f = 0.1 Hz to 10 Hz
25°C
1.1
µV
f = 1 kHz
25°C
1.1
fA/√Hz
RL = 10 kΩ,
f = 10 kHz
25°C
0 025%
0.025%
RL = 10 kΩ,
CL = 100 pF
25°C
2
RL = 600 Ω,
CL = 100 pF
25°C
1.5
0.1%
25°C
5
0.01%
25°C
10
AVD = 1,
RL = 10 kΩ,
RL = 10 kΩ
25°C
40
CL = 100 pF
25°C
60°
RL = 600 Ω,
CL = 100 pF
25°C
70°
V/µs
nV/√Hz
MHz
µs
kHz
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–179
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2062M
TLE2062AM
TLE2062BM
MIN
25°C
TLE2062M
VIO
I
Input
offset
ff
voltage
l
Temperature coefficient of input offset voltage
Input offset current
IIB
Input bias current
VICR
RS = 50 Ω
VIC = 0
0,
D and P
packages
RL = 100 Ω
AVD
M i
Maximum
negative
i peak
k output
voltage swing
Large-signal
diff
i l voltage
l
Large
L
signal
i
l differential
amplification
FK and JG
packages
RL = 600 Ω
D and P
packages
RL = 100 Ω
µV/°C
25°C
0.04
µV/mo
25°C
1
3
Full range
– 1.6
to
4
25°C
Full range
25°C
Full range
25°C
Full range
25°C
Full range
25°C
RL = 10 kΩ
VO = 0 to 2
2.5
5V
V,
RL = 600 Ω
FK and
d JG
packages
25V
VO = 0 to – 2.5
V,
RL = 600 Ω
VO = 0 to 2 V
V,
RL = 100 Ω
V
VO = 0 to – 2 V,
RL = 100 Ω
D and
dP
packages
3.5
V
V
3.7
3.6
2
2.5
V
3.1
2
– 3.5
– 3.9
–3
– 2.5
– 3.5
–2
– 2.5
–2
25°C
15
Full range
2
25°C
1
25°C
nA
3
2.5
Full range
Full range
–2
to
6
nA
pA
30
– 1.6
to
4
Full range
pA
15
25°C
25°C
VO = ± 2
2.8
8V
V,
3
5
25°C
RL = 600 Ω
mV
V
6
Full range
Full range
RL = 10 kΩ
VOM –
0.7
Full range
FK and JG
packages
4
6
Full range
Common-mode input voltage range
i i peak
k output
M i
Maximum
positive
voltage swing
0.9
25°C
RL = 10 kΩ
VOM +
5
Full range
Input offset voltage long-term drift (see Note 4)
IIO
MAX
1
7
25°C
TLE2062BM
αVIO
TYP
Full range
TLE2062AM
UNIT
V
– 2.7
80
65
0.5
1
Full range
0.5
25°C
0.75
Full range
0.5
25°C
0.5
Full range
0.25
16
V/mV
V/
V
45
3
† Full range is – 55°C to 125°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150 °C extrapolated
to TA = 25 °C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
5–180
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
TA†
TEST CONDITIONS
TLE2062M
TLE2062AM
TLE2062BM
MIN
ri
Input resistance
25°C
ci
Input capacitance
zo
Open-loop output impedance
CMRR
Common-mode rejection ratio
kSVR
Supply-voltage rejection ratio (∆VCC ± /∆VIO)
ICC
Supply current (two amplifiers)
∆ICC
Ω
4
pF
25°C
560
Ω
25°C
65
Full range
60
VCC ± = ± 5 V to ± 15 V,
RS = 50 Ω
25°C
75
Full range
65
25°C
Supply-current
Supply
current change over operating
temperature range (two amplifiers)
MAX
25°C
IO = 0
VIC = VICRmin
RS = 50 Ω,
Ω
VO = 0
0,
TYP
1012
82
dB
93
dB
560
620
Full range
No
N load
l d
UNIT
650
Full range
µA
µA
72
† Full range is – 55°C to 125°C.
operating characteristics at specified free-air temperature, TA = 25°C, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TLE2062M
TLE2062AM
TLE2062BM
MIN
SR
Slew rate at unity gain (see Figure 1)
TYP
RL = 10 kΩ,
CL = 100 pF
3.4
f = 10 Hz,
RS = 20 Ω
59
f = 1 kHz,
RS = 20 Ω
43
Vn
Equivalent input noise voltage (see Figure 2)
VN(PP)
In
Peak-to-peak equivalent input noise voltage
f = 0.1 Hz to 10 Hz
Equivalent input noise current
f = 1 kHz
THD
Total harmonic distortion
VO(PP) = 2 V,
AVD = 2,
RL = 10 kΩ,
f = 10 kHz
0 025%
0.025%
B1
Unity-gain bandwidth (see Figure 3)
RL = 10 kΩ,
CL = 100 pF
1.8
RL = 600 Ω,
CL = 100 pF
1.3
Settling time
BOM
φm
Maximum output-swing bandwidth
Phase margin at unity gain (see Figure 3)
1.1
1
0.1%
5
0.01%
10
AVD = 1,
RL = 10 kΩ,
RL = 10 kΩ
140
CL = 100 pF
58°
RL = 600 Ω,
CL = 100 pF
75°
UNIT
MAX
V/µs
nV/√Hz
µV
fA/√Hz
MHz
µs
kHz
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–181
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2062M
TLE2062AM
TLE2062BM
MIN
25°C
TLE2062M
VIO
I
Input
offset
ff
voltage
l
Temperature coefficient of input offset voltage
Input offset current
IIB
Input bias current
VICR
RS = 50 Ω
VIC = 0
0,
3
25°C
0.04
µV/mo
25°C
2
4
Full range
– 11
to
13
L
Large-signal
i
l diff
differential
i l voltage
l
amplification
lifi i
Full range
12.5
25°C
12.5
25°C
RL = 10 kΩ
VO = 0 to 8 V
V,
RL = 600 Ω
VO = 0 to – 8 V,
V
RL = 600 Ω
ri
Input resistance
ci
Input capacitance
zo
Open-loop output impedance
IO = 0
CMRR
Common-mode rejection ratio
VIC = VICRmin
min,
kSVR
Supply-voltage rejection ratio (∆VCC ± /∆VIO)
VCC ± = ± 5 V to ± 15 V,,
RS = 50 Ω
– 13
– 12.5
25°C
– 12.5
V
V
13.7
13.2
V
– 13.7
– 13
V
– 11
25°C
30
Full range
20
25°C
25
Full range
7
25°C
3
Full range
1
230
100
V/ V
V/mV
25
1012
Ω
25°C
4
pF
25°C
560
Ω
25°C
RS = 50 Ω
nA
11
Full range
Full range
VO = ± 1
100 V,
V
13
– 12
to
16
nA
pA
40
– 11
to
13
Full range
pA
20
25°C
25°C
RL = 600 Ω
1
µV/°C
Common-mode input voltage range
M i
Maximum
negative
i peak
k output voltage
l
swing
i
mV
V
6
Full range
25°C
RL = 10 kΩ
AVD
0.5
Full range
Full range
M i
positive
i i peakk output voltage
l
i
Maximum
swing
2
4
Full range
RL = 600 Ω
VOM –
0.8
25°C
RL = 10 kΩ
VOM +
4
Full range
Input offset voltage long-term drift (see Note 4)
IIO
MAX
0.9
6
25°C
TLE2062BM
αVIO
TYP
Full range
TLE2062AM
UNIT
25°C
72
Full range
65
25°C
75
Full range
65
90
93
dB
dB
† Full range is – 55°C to 125°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150 °C extrapolated
to TA = 25 °C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
5–182
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA†
TLE2062M
TLE2062AM
TLE2062BM
MIN
ICC
∆ICC
25°C
Supply current
VO = 0
0,
Supply-current
pp y
change
g over operating
p
g
temperature range
N load
No
l d
UNIT
TYP
MAX
625
690
Full range
730
Full range
µA
µA
97
† Full range is – 55°C to 125°C.
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
TEST CONDITIONS
SR
Slew rate at unity gain (see Figure 1)
Vn
Equivalent input noise voltage (see Figure 2)
VN(PP)
In
Peak-to-peak equivalent input noise voltage
Equivalent input noise current
THD
Total harmonic distortion
VO(PP) = 2 V,
AVD = 2,
B1
Unity-gain bandwidth (see Figure 3)
Settling time
BOM
Maximum output-swing bandwidth
φm
Phase margin at unity gain (see Figure 3)
TA†
25°C
TLE2062M
TLE2062AM
TLE2062BM
MIN
TYP
2
3.4
UNIT
MAX
RL = 10 kΩ
kΩ,
CL = 100 pF
f = 10 Hz,
RS = 20 Ω
25°C
70
f = 1 kHz,
RS = 20 Ω
25°C
40
f = 0.1 Hz to 10 Hz
25°C
1.1
µV
f = 1 kHz
25°C
1.1
fA/√Hz
RL = 10 kΩ,
f = 10 kHz
25°C
0.025%
RL = 10 kΩ,
CL = 100 pF
25°C
2
RL = 600 Ω,
CL = 100 pF
25°C
1.5
Full range
1.8
0.1%
25°C
5
0.01%
25°C
10
AVD = 1
1,
RL = 10 kΩ
25°C
40
RL = 10 kΩ,
CL = 100 pF
25°C
60°
RL = 600 Ω,
CL = 100 pF
25°C
70°
V/µs
nV/√Hz
MHz
µs
kHz
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–183
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
electrical characteristics at VCC± = ±15 V, TA = 25°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIO
αVIO
Input offset voltage
IIO
IIB
Input offset current
VICR
Common-mode
g
C
d input
i p voltage
l g range
VOM +
Maximum positive peak output voltage swing
VOM –
Maximum negative peak output voltage swing
AVD
L g ig l differential
Large-signal
diff
i l voltage
l g amplification
plifi i
ri
Input resistance
ci
Input capacitance
zo
Open-loop output impedance
CMRR
Common-mode rejection ratio
kSVR
Supply-voltage rejection ratio (∆VCC /∆VIO)
Input offset voltage long-term drift (see Note 4)
VIC = 0
0,
TLE2062Y
MIN
TYP
MAX
0.9
4
mV
µV/mo
0.04
RS = 50 Ω
UNIT
2
pA
4
pA
– 11
to
13
– 12
to
16
V
RL = 10 kΩ
13.2
13.7
RL = 600 Ω
12.5
13.2
RL = 10 kΩ
RL = 600 Ω
– 13.2
– 13.7
– 12.5
– 13
Input bias current
V
V
VO = ±10 V,
VO = 0 to 8 V,
RL = 10 kΩ
30
230
RL = 600 Ω
25
100
VO = 0 to – 8 V,
RL = 600 Ω
3
25
1012
Ω
4
pF
IO = 0
VIC = VICRmin,
RS = 50 Ω
VCC ± = ± 5 V to ±15 V,
RS = 50 Ω
V/ V
V/mV
560
Ω
72
90
dB
75
93
dB
ICC
Supply current
VO = 0,
No load
625
690
µA
NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150 °C extrapolated
to TA = 25 °C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
operating characteristics at VCC± = ±15 V, TA = 25°C
PARAMETER
SR
TEST CONDITIONS
Slew rate at unity gain
TLE2062Y
MIN
TYP
MAX
2.6
3.4
4
RL = 10 kΩ,
CL = 100 pF
f = 10 Hz,
RS = 20 Ω
70
f = 1 kHz,
RS = 20 Ω
40
Vn
Equivalent input noise voltage (see Figure 2)
VN(PP)
In
Peak-to-peak equivalent input noise voltage
f = 0.1 Hz to 10 Hz
Equivalent input noise current
f = 1 Hz
THD
Total harmonic distortion
VO(PP) = 2 V,
AVD = 2,
RL = 10 kΩ,
f = 10 kHz
B1
Unity-gain bandwidth (see Figure 3)
RL = 10 kΩ,
CL = 100 pF
2
RL = 600 Ω,
CL = 100 pF
1.5
Settling time
BOM
Maximum output-swing bandwidth
φm
Phase margin at unity gain (see Figure 3)
5–184
nV/√Hz
µV
1.1
fA/√Hz
0.025%
5
0.01%
10
AVD = 1,
RL = 10 kΩ,
RL = 10 kΩ
40
CL = 100 pF
60°
RL = 600 Ω,
CL = 100 pF
70°
• DALLAS, TEXAS 75265
V/µs
1.1
0.1%
POST OFFICE BOX 655303
UNIT
MHz
µs
kHz
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
PARAMETER MEASUREMENT INFORMATION
2 kΩ
VCC +
VCC +
–
–
VO
VI
VO
+
+
VCC –
CL
(see Note A)
VCC –
RL
RS
RS
NOTE A: CL includes fixture capacitance.
Figure 1. Slew-Rate Test Circuit
Figure 2. Noise-Voltage Test Circuit
10 kΩ
VI
VCC +
100 Ω
–
VO
+
VCC –
RL
CL
(see Note A)
NOTE A: CL includes fixture capacitance.
Figure 3. Unity-Gain Bandwidth and Phase-Margin Test Circuit
typical values
Typical values presented in this data sheet represent the median (50% point) of device parametric performance.
input bias offset current
At the picoamp bias current level typical of the TLE2062, TLE2062A, and TLE2062B, accurate measurement
of the bias current becomes difficult. Not only does this measurement require a picoammeter, but test socket
leakages can easily exceed the actual device bias currents. To accurately measure these small currents, Texas
Instruments uses a two-step process. The socket leakage is measured using picoammeters with bias voltages
applied but with no device in the socket. The device is then inserted into the socket and a second test that
measures both the socket leakage and the device input bias current is performed. The two measurements are
then subtracted algebraically to determine the bias current of the device.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–185
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
Input offset voltage
Distribution
4
IIB
Input bias current
vs Common-mode voltage
g
vs Free-air temperature
5
6
IIO
VICR
Input offset current
vs Free-air temperature
6
Common-mode input voltage range
vs Free-air temperature
7
VOM
Maximum peak output voltage swing
vs Output
p current
vs Supply voltage
VO(PP)
Maximum peak-to-peak output voltage
vs Frequency
AVD
Large-signal differential voltage amplification
vs Frequency
q
y
vs Free-air temperature
15
16
IOS
Short-circuit output current
vs Time
vs Free-air temperature
17
18
zo
Output impedance
vs Frequency
19
CMRR
Common-mode rejection ratio
vs Frequency
20
Supply current
vs Supply
pp y voltage
g
vs Free-air temperature
21
22
Pulse response
Small signal
g
Large signal
23,24
,
25,26
Noise voltage (referred to input)
0.1 to 10 Hz
27
Equivalent input noise voltage
vs Frequency
28
Total harmonic distortion
vs Frequency
29,30
B1
Unity-gain bandwidth
vs Supply
pp y voltage
g
vs Free-air temperature
31
32
φm
Phase
margin
gi
Ph
vs Supply voltage
vs Load capacitance
p
vs F
Free-air
i temperature
33
34
35
Phase shift
vs Frequency
15
ICC
Vn
THD
5–186
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
8,9
,
10,11,12
13,14
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
TLE2062
DISTRIBUTION OF
INPUT OFFSET VOLTAGE
INPUT BIAS CURRENT
vs
COMMON-MODE INPUT VOLTAGE
2
1836 Amplifiers Tested From 1 Wafer Lot
VCC ± = ± 15 V
TA = 25°C
P Package
VID = 0
TA = 25°C
IIIB
IB – Input Bias Current – nA
Percentage of Amplifiers – %
15
10
5
1.5
1
0.5
VCC ± = ± 15 V
0
–4
–2
–3
–1
0
1
2
3
0
– 20 – 15 – 10
4
VIO – Input Offset Voltage – mV
INPUT BIAS CURRENT
AND INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
103
IIO
IIB
101
45
10
15
20
VCC + + 2
104
100
25
5
COMMON-MODE INPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
VCC ± = ± 5 V
VIC = 0
102
0
Figure 5
VIC
V
IC – Common-Mode Input Voltage – V
iiB
IIB and IIO
I IO – Input Bias and Input Offset Current – pA
Figure 4
105
–5
VIC – Common-Mode Input Voltage – V
65
85
105
125
VCC + + 1
VIC +
VCC +
VCC – + 4
VCC – + 3
VIC –
VCC – + 2
– 75
– 50
TA – Free-Air Temperature – °C
– 25
0
25
50
75
100
125
TA – Free-Air Temperature – °C
Figure 6
Figure 7
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–187
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
MAXIMUM NEGATIVE PEAK
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
V OM+ – Maximum Positive Peak Output Voltage – V
20
TA = 25°C
18
16
14
VCC ± = ± 15 V
12
10
8
6
4
VCC ± = ± 5 V
2
0
0
–10
– 20
– 30
– 40
– 50
– 60
VVOM
OM – – Maximum Negative Peak Output Voltage – V
MAXIMUM POSITIVE PEAK
OUTPUT VOLTAGE
vs
OUTPUT CURRENT
– 20
TA = 25°C
– 18
– 16
– 14
VCC ± = ± 15 V
– 12
– 10
–8
–6
–4
VCC ± = ± 5 V
–2
0
0
5
10
IO – Output Current – mA
Figure 8
VOM
V
O M – Maximum Peak Output Voltage – V
VOM – Maximum Peak Output Voltage – V
V
OM
30
35
40
20
RL = 10 kΩ
TA = 25°C
15
VOM +
10
5
0
–5
–10
VOM –
–15
0
2
4
6
8
10
12
14
16
18
20
ÁÁ
ÁÁ
ÁÁ
RL = 600 Ω
TA = 25°C
15
VOM +
10
5
0
–5
–10
VOM –
–15
– 20
0
2
|VCC ±| – Supply Voltage – V
4
6
8
10
12
14
F i g u r e 11
POST OFFICE BOX 655303
16
|VCC ±| – Supply Voltage – V
Figure 10
5–188
25
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
20
– 20
20
Figure 9
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
ÁÁ
ÁÁ
ÁÁ
15
IO – Output Current – mA
• DALLAS, TEXAS 75265
18
20
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
MAXIMUM PEAK-TO-PEAK
OUTPUT VOLTAGE
vs
FREQUENCY
RL = 100 Ω
TA = 25°C
VOM +
4
2
0
–2
ÁÁ
ÁÁ
ÁÁ
–4
VOM –
–6
0
2
4
8
6
10
10
VCC ± = ± 5 V
RL = 10 kΩ
TA = 25°C
8
6
4
2
0
10 k
100 k
|VCC ±| – Supply Voltage – V
MAXIMUM PEAK-TO-PEAK
O U T P U T V O LTA G E
vs
FREQUENCY
30
VCC ± = ± 15 V
RL = 10 kΩ
TA = 25°C
20
15
10
5
0
10 k
100 k
10 M
Figure 13
1 M
AVD – Large-Signal Differential Voltage Amplification – dB
VVO) (( P
PP
P )) – M a x i m u m P e a k - t o - P e a k O u t p u t Vo l t a g e – V
Figure 12
25
1M
f – Frequency – Hz
10 M
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
120
60°
Phase Shift
100
80°
80
100°
AVD
60
120°
40
140°
20
0
– 20
0.1
160°
VCC ± = ± 15 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
1
10
Phase Shift
VVOM
O M – Maximum Peak Output Voltage – V
6
VO(PP) – Maximum Peak-to-Peak Output Voltage – V
VO(PP)
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
180°
100
1k
200°
10 k 100 k 1 M 10 M
f – Frequency – Hz
f – Frequency – Hz
Figure 14
Figure 15
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–189
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION
vs
FREE-AIR TEMPERATURE
SHORT-CIRCUIT OUTPUT CURRENT
vs
ELAPSED TIME
400
80
VID = – 100 mV
RL = 10 kΩ
IIOS
OS – Short-Circuit Output Current – mA
AVD – Large-Signal Differential Voltage Amplification – dB
TYPICAL CHARACTERISTICS
350
300
VCC ± = ± 15 V
250
200
150
100
VCC ± = ± 5 V
50
0
–75 – 50
60
40
VCC ± = ± 15 V
TA = 25°C
VO = 0
20
0
– 20
– 40
VID = 100 mV
– 60
– 80
– 25
0
25
50
75
100
0
125
10
20
TA – Free-Air Temperature – °C
Figure 16
80
50
60
OUTPUT IMPEDANCE
vs
FREQUENCY
35
VCC ± = ± 15 V
VO = 0
60
30
VID = – 100 mV
40
zo – Output Impedance – O
Ω
zo
IOS
IOS – Short-Circuit Output Current – mA
40
Figure 17
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
20
0
– 20
VID = 100 mV
– 40
VCC ± = ± 15 V
TA = 25°C
25
AVD = 10
20
AVD = 1
15
10
AVD = 100
5
– 60
– 80
– 75 – 50 – 25
0
25
50
75
100
125
0
100
TA – Free-Air Temperature – °C
1k
10 k
Figure 19
POST OFFICE BOX 655303
100 k
f – Frequency – Hz
Figure 18
5–190
30
t – Elasped Time – s
• DALLAS, TEXAS 75265
1M
10 M
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
700
VCC ± = ± 5 V
TA = 25°C
VO = 0
No Load
675
80
A
xA
IICC
CC – Supply Current – µ
CMRR – Common-Mode Rejection Ratio – dB
100
60
40
650
TA = 125°C
625
600
TA = 25°C
575
550
20
TA = – 55°C
525
0
10
100
1k
10 k
100 k
500
10 M
1M
0
2
4
6
f – Frequency – Hz
Figure 20
12
14
16
18
20
VOLTAGE-FOLLOWER
SMALL-SIGNAL
PULSE RESPONSE
100
700
VO = 0
No Load
650
VO
VO – Output Voltage – mV
A
xA
IICC
CC – Supply Current – µ
10
Figure 21
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
675
8
|VCC ±| – Supply Voltage – V
VCC ± = ± 15 V
625
600
575
550
50
0
VCC ± = ± 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 1
– 50
VCC ± = ± 5 V
525
500
– 75 – 50 – 25
–100
0
25
50
75
100
0
125
1
2
3
t – Time – µs
TA – Free-Air Temperature – °C
Figure 22
Figure 23
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–191
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
VOLTAGE-FOLLOWER
SMALL-SIGNAL
PULSE RESPONSE
VOLTAGE-FOLLOWER
LARGE-SIGNAL
PULSE RESPONSE
4
100
50
VO – Output Voltage – V
VO
VO – Output Voltage – mV
VO
3
0
VCC ± = ± 15 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 1
– 50
2
1
VCC ± = ± 5 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 1
0
–1
–2
–100
0
1
2
0
3
5
t – Time – µs
Figure 24
15
Figure 25
VOLTAGE-FOLLOWER
LARGE-SIGNAL
PULSE RESPONSE
NOISE VOLTAGE
(REFERRED TO INPUT)
0.1 TO 10 Hz
15
1
VCC ± = ± 15 V
TA = 25°C
VCC± = ± 15 V
RL = 10 kΩ
10 C = 100 pF
L
TA = 25°C
See Figure 1
5
0.5
Noise Voltage – µV
uV
VO – Output Voltage – V
VO
10
t – Time – µs
0
–5
0
– 0.5
–10
–15
0
10
20
t – Time – µs
30
40
–1
0
1
2
4
5
6
t – Time – s
Figure 26
5–192
3
Figure 27
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
8
9
10
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
0.3
100
VDD ± = ± 5 V
RS = 20 Ω
TA = 25°C
See Figure 2
80
THD – Total Harmonic Distortion – %
Vn – Equivalent Input Noise Voltage – nV/
Hz
VN
nVCHz
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
60
40
20
10
1k
100
0.2
0.1
Source Signal
0
10
0
1
VCC ± = ± 5 V
AVD = 2
VO(PP) = 2 V
TA = 25°C
10 k
100
Figure 28
B1
B1 – Unity-Gain Bandwidth – MHz
THD – Total Harmonic Distortion – %
2.5
VCC ± = ± 5 V
AVD = 10
VO(PP) = 2 V
TA = 25°C
0.4
0.3
0.2
Source Signal
0.1
100
100 k
UNITY-GAIN BANDWIDTH
vs
SUPPLY VOLTAGE
0.6
0
10
10 k
Figure 29
TOTAL HARMONIC DISTORTION
vs
FREQUENCY
0.5
1k
f – Frequency – Hz
f – Frequency – Hz
1k
10 k
100 k
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 3
2
1.5
1
0
2
f – Frequency – Hz
4
6
8
10
12
14
16
18
20
|VCC ±| – Supply Voltage – V
Figure 30
Figure 31
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–193
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
PHASE MARGIN
vs
SUPPLY VOLTAGE
UNITY-GAIN BANDWIDTH
vs
FREE-AIR TEMPERATURE
62°
2.5
2
VCC ± = ± 15 V
VCC ± = ± 5 V
1.5
φxx
m – Phase Margin
b1
B1 – Unity-Gain Bandwidth – MHz
61°
RL = 10 kΩ
CL = 100 pF
TA = 25°C
See Figure 3
60°
59°
58°
57°
RL = 10 kΩ
CL = 100 pF
See Figure 3
1
– 75 – 50 – 25
56°
0
25
50
75
100
55°
0
125
2
TA – Free-Air Temperature – °C
Figure 32
6
8
10
12
14
16
18
60°
PHASE MARGIN
vs
FREE-AIR TEMPERATURE
66°
VCC ± = ± 15 V
RL = 10 kΩ
TA = 25°C
See Figure 3
40°
30°
20°
10°
RL = 10 kΩ
CL = 100 pF
See Figure 3
64°
φxx
m – Phase Margin
50°
62°
VCC ± = ± 15 V
60°
VCC ± = ± 5 V
58°
56°
0°
0
200
400
600
800
1000
54°
–75
– 50
CL – Load Capacitance – pF
Figure 34
0
25
50
75
100
– 25
TA – Free-Air Temperature – °C
Figure 35
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–194
20
Figure 33
PHASE MARGIN
vs
LOAD CAPACITANCE
φxx
m – Phase Margin
4
|VCC ±| – Supply Voltage – V
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
125
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
APPLICATION INFORMATION
input characteristics
The TLE2062, TLE2062A, and TLE2062B are specified with a minimum and a maximum input voltage that if
exceeded at either input could cause the device to malfunction.
Because of the extremely high input impedance and resulting low bias current requirements, the TLE2062,
TLE2062A, and TLE2062B are well suited for low-level signal processing; however, leakage currents on
printed-circuit boards and sockets can easily exceed bias current requirements and cause degradation in
system performance. It is a good practice to include guard rings around inputs (see Figure 38). These guards
should be driven from a low-impedance source at the same voltage level as the common-mode input.
The inputs of any unused amplifiers should be tied to ground to avoid possible oscillation.
VI
+
VI
+
VO
–
+
VO
–
VO
VI
–
Figure 36. Use of Guard Rings
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–195
TLE2062, TLE2062A, TLE2062B, TLE2062Y
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE
µPOWER DUAL OPERATIONAL AMPLIFIERS
SLOS044E – OCTOBER 1989 – REVISED AUGUST 1994
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using PSpice  Parts model generation software. The Boyle
macromodel (see Note 5) and subcircuit in Figure 37 were generated using the TLE2062 typical electrical and
operating characteristics at 25°C. Using this information, output simulations of the following key parameters can
be generated to a tolerance of 20% (in most cases):
•
•
•
•
•
•
•
•
•
•
•
•
Maximum positive output voltage swing
Maximum negative output voltage swing
Slew rate
Quiescent power dissipation
Input bias current
Open-loop voltage amplification
Unity-gain frequency
Common-mode rejection ratio
Phase margin
DC output resistance
AC output resistance
Short-circuit output current limit
NOTE 5: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Integrated Circuit Operational Amplifiers”, IEEE Journal
of Solid-State Circuits, SC-9, 353 (1974).
99
3
VCC +
egnd
9
rss
iss
92
fb
–
+
din
+
rp
2
10
IN –
j1
dp
vc
j2
IN+
1
11
r2
–
53
dc
12
hlim
–
+
C2
6
VCC –
54
4
+
–
–
+
vin
+
gcm
ga
–
ro1
de
5
–
ve
OUT
.subckt TLE2062 1 2 3 4 5
c1
11 12 1.457E–12
c2
6
7 15.00E–12
dc
5 53 dx
de
54
5 dx
dlp 90 91 dx
dln 92 90 dx
dp
4
3 dx
egnd 99
0 poly (2) (3,0) (4,0) 0 .5 .5
fb
7 99 poly (5) vb vc ve vlp
+ vln 0 4.357E6 – 4E6 4E6 4E6 – 4E6
ga
6
0 11 12 188.5E–6
gcm
0
6 10 99 3.352E–9
iss
3 10 dc 51.00E–6
hlim 90
0 vlim 1k
j1
11
2 10 jx
j2
12
1 10 jx
r2
6
9 100.0E3
rd1
4 11 5.305E3
rd2
4 12 5.305E3
r01
8
5 280
r02
7 99 280
rp
3
4 113.2E3
rss 10 99 3.922E6
vb
9
0 dc 0
vc
3 53 dc 2
ve
54
4 dc 2
vlim 7
8 dc 0
vlp 91 0 dc 50
vln
0 92 dc 50
.model dx D(Is=800.0E–18)
.model jx PJF(Is=2.000E–12 Beta = 423E–6
+ Vto = – 1)
.ends
Figure 37. Boyle Macromodel and Subcircuit
PSpice and Parts are trademarks of MicroSim Corporation
5–196
–
vlim
8
rd2
91
+
vip
7
C1
rd1
+ dip
90
ro2
vb
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor
product or service without notice, and advises its customers to obtain the latest version of relevant information
to verify, before placing orders, that the information being relied on is current.
TI warrants performance of its semiconductor products and related software to the specifications applicable at
the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are
utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each
device is not necessarily performed, except those mandated by government requirements.
Certain applications using semiconductor products may involve potential risks of death, personal injury, or
severe property or environmental damage (“Critical Applications”).
TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED
TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS.
Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI
products in such applications requires the written approval of an appropriate TI officer. Questions concerning
potential risk applications should be directed to TI through a local SC sales office.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards should be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein. Nor does TI warrant or represent that any license, either
express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property
right of TI covering or relating to any combination, machine, or process in which such semiconductor products
or services might be or are used.
Copyright  1995, Texas Instruments Incorporated