Pushbuttons/Selectors/Pilot Lights
AR22/DR22 and AR30/DR30
Accessories
Description
Type
Wrench
AR9A004
B
A
Description
Type
Protection cover
AR9E760
This cover protects against accidental
operation. The cover lid is returned home
with a spring force. (Packing is provided)
Applicable type:
AR22F0L, F5L, E0L, E5L, E0M, E5M, F0P
F5P, E0P, E5P
AR22F0R, F5R, E0R, E5R, F0S, F5S, E0S
E5S, E0Y, E5Y, F0Y, F5Y
C
Remarks
Section “A”
Use this section to tighten the locking nut
for mounting the operator on a panel.
AF95-29
Water-tight cap
Section “B”
Use this section to tighten or remove the
button or lens.
Applicable type:
AR22F0L, F5L, E0L, E5L, F0P, F5P, E0P, E5P
DR22E3L, E3P
AR30E0L, E5L, G3L, G8L
DR30E3L
AF95-418
Wrench
AR9D797
AF95-30
Section “C”
This is for 40mm-dia. push-lock, turn-reset
type pushbutton switch.
Fit the tabs on the section “C” in the
grooves around the center of pushbutton,
and turn the wrench to tighten or remove
the button.
Key washer
AH9A702
Use this wrench to tighten or remove the
lens of a pilot light.
Applicable type
DR22D0L
DR30D0L, K0L
Key washer
This rubber cap protects the operator and
switch machanism against dust and water.
Use this cap in a dusty or moist environment.
Applicable type
AR22F0L, F5L, E0L,E5L, F0R, F5R
AR22E0R, E5R
AR9Y715
Use this metal washer when securing a
operator in a 22.3mm-dia. panel cutout
hole.
AF95-25
AH9Y02H
Use this metal washer when securing an
operator in a 30.5mm-dia. panel cutout
hole.
SC-1016
Operator base
cover
SI-1030
Special tool
AR9Y002
AH9A321:
For all types except pilot
lights
DR9A321-T: For pilot lights
SG-873
Remarks
1. This tool is used to remove contact
blocks and transformer units.
2. The AH9A321 can remove round color
chips of switches.
Attach this cover to the operator base of a
pushbutton switch with only one contact
block (1NO or 1NC) to protect against dust.
AF95-26
Button
AF95-21
Applicable type
FAR, FBR
FAR, FBR
Type
AR9P019-■■
AR9C020-■■
Applicable type
FAR, FBR
FAR, FBR
AF98-196
MAS mark plate
Lamp changer
Type
AR9C027-C
AR9C028-C
AH9A790
Remarks
1. Use this rubber wrench for mounting or
removing lamps from pilot lights and
illuminated pushbutton switches.
2. This wrench can be used for both LED
and incandescent lamps.
AF98-197
Adapter for
AR22 and DR22
AR9Y008
Use this resin adapter to mount the AR22/
DR22 (switch/pilot light) in a 25.5mm-dia.
cutout hole on a panel.
AF95-22
AF98-198
Pushbuttons/Selectors/Pilot Lights
AR22/DR22 and AR30/DR30
Accessories
Description
Type
Description
Type
Adapter for AR22 and
DR22
AR9Y718
Legend plate for AR22
AR9P712-➀➁➂
➀ Color
B: Black
A: Partially black
Use this resin adapter to mount the AR22/
DR22 (switch/pilot light) in a 25.5mm-dia.
cutout hole on a panel.
Legend
Code
➁
➂
AR9Y003
Blank
Mount this adapter onto a 22mm-dia.
command switch with a square button and a
square bezel to obtain a 30mm-dia. command
switch with a square button and a square
bezel. Mount this adapter onto a 22mm-dia.
command switch with a round button and a
square bezel to obtain a 30mm-dia. command
switch with a round button and a square bezel.
A resin ring-packing and a locking nut are
accessories of the adapter.
OFF
START
STOP
OFF-ON
0
ON
0
0
0
2
AF95-28
Adapter for AR30 and
DR30
This aluminum
legend plate is for a
22.3mm-dia. panel
cutout hole. (Packing
provided)
0
0
B
C
D
A
SI-1032
Legend plate for AR22
AR9P711-➀➁➂
➀ Color
B: Black
A: Aluminum
This aluminum
legend plate is for a
22.3mm-dia. panel
cutout hole. (Packing
provided)
AF95-416
Wrench for AR22 and
DR22
A
Legend
Code
➁
➂
Blank
0
ON
0
0
0
2
AR9A006
To mount an AR22 or DR22 command switch
to a panel, use this wrench to tighten the
locking nut securely. It is very easy to fit this
wrench onto the locking nut.
The wrench with an inside rubber-lining can
be easily used with either your right or left
hand.
OFF
START
STOP
OFF-ON
0
0
B
C
D
A
A
SI-1033
AF96-241
Wrench for AR30 and
DR30
Legend plate for AR22
emergency stop
AR9A001
To mount an AR30 or DR30 command switch
to a panel, use this wrench to tighten the
locking nut securely.
AF95-467
Legend plate for AR22
AR9P713-➀➁➂
➀ Color
B: Black
A: Partially black
Legend
Code
➁
➂
Blank
0
ON
0
0
0
2
OFF
START
STOP
OFF-ON
AF95-114
0
0
B
C
D
A
This aluminum
legend plate is for a
22.3mm-dia. panel
cutout hole. (Packing
provided)
A
AR9P719-➀➁
This aluminum legend
plate is for a 22.3mmdia. panel cutout hole.
(Packing provided)
Legend
Code
➀ ➁
Blank
EMERGENCY STOP
0
5
0
A
SK-598
Blind cap
Round:
SI-1027
AH9Y725-B Black
AH9Y725-H Gray
Square: AH9Y726-B Black
AH9Y726-H Gray
Use this cap to cover up unused panel
cutout holes
For oil proof usage, use together with
packing and a locking nut.
Pushbuttons/Selectors/Pilot Lights
AR22/DR22 and AR30/DR30
Accessories
Description
Type
Description
Type
Jumper
DN9Y029 (For pilot light without
transformer)
DR9Y001 (For pilot light with transformer)
Use this jumper to connect terminals
allocated in a 30mm spacing.
Rated current is 3A
Lens
(For illuminated
pushbutton switch
and pilot light)
Code
Used with
AR9C011-
AR22F0L, F5L, F0P, F5P
AR9C012-
AR22E0L, E5L, E0P, E5P
AR22G4L, G9L,
DR22E3L, E3P
AR30E0L, E0L, E5L, G3L, G8L
DR30E3L
AR9C016-
AR22M0L, M5L
AR9C015-
AR22M4L, M4P
DR9C001-
DR22D0L
DR30D0L
DR9C126-
DR22F3M
DR9C126-C
DR22F4M
AR9C014-
AR22E0M, E5M
DR22E3M
DR9C002-
DR30K0L
Replace the
mark by the lens color code
AF95-27
Legend plate for AR30
Y-1545
AR9P177-➀➁➂➃
➀ Material and
color
This legend plate is
for a 30.5mm-dia.
panel cutout hole.
Code Material
Color
S
Brass
Silver
B
Aluminum
Black
A
Aluminum
➁ Size
H : Standard
S : Short size
AF89-466
Legend
Code
➂
➃
0
0
0
0
0
2
0
A
B
C
D
A
Blank
ON
OFF
START
STOP
OFF-ON
Legend plate for AR30
emergency stop
5
AH9P720-➀➁
AF94-458
This aluminum legend
plate is for a 30.5mm-dia.
panel cutout hole.
Legend
Code
➀ ➁
Blank
0 0
EMERGENCY STOP
Color
Green
Red
Clear
Yellow
Code
G
R
C
Y
Color
Orange Blue
Code
A
Pushbutton
Code
Used with
AR9C001-
AR22F0R, F5R, F0Y, F5Y
AR30F0R, F5R
AR9C002-
AR22S1R, S2R, S3R, S6R
AR30S1R, S2R, S3R, S6R
AR9C003-
AR22E0R, E5R, G0R, G3R, G8R
AR22E0Y, E5Y
AR30E0R, E5R, G0R, G1R, G6R
AR9C007-
AR22M0R, M5R, M3R
AR30M0R, M5R, M3R
AR9C006-
AR22M4R, M4Y
AR30M4R
AR9C004-
AR22F0S, F5S
AR9C005-
AR22E0S, E5S
A
SK-598
Blind cap
(For AR30 and DR30)
S
AH9Y004
This cap is used to cover up unused panel
cutout hole.
T-1993
Legend plate with
name plate
Legend plate
Name plate
AR9P009-B
AR9P010-B ➀➁ (34 × 8mm)
AR009-B
Legend plate
Name plate
AR9P011-B
AR9P012-B ➀➁ (34 × 13mm)
Legend plate
Name plate
AR9P007-B
AR9P008-B ➀➁ (27 × 16mm)
Name
plate
Code
➀
➁
ON
OFF
START
STOP
OFF-ON
0
0
0
0
2
A
B
C
D
A
AR0007-B
AR011-B
Name
plate
Replace the
AF94-461
mark by the button color code
Color
Green
Red
White
Yellow
Code
G
R
W
Y
Color
Orange Blue
Black
Code
A
B
S
Pushbuttons/Selectors/Pilot Lights
AR22/DR22 and AR30/DR30
Accessories
Description
Type
Button being
centered of
pushbutton
(For V type)
Description
Type
Knob
Code
Used with
Code
Used with
AR9C020-R
AR22V2R, AR30V2R
AR9M006-
AR22PR, PCR, PY, PCY
AR30PR, PCR
AR9C018-R
AR22V2L, VAL
AR30V2L
Replace the
mark by the konb color code
Color
Black
Green
Red
Code
B
G
R
AF95-32
Push-lock, turnreset pushbutton
(V and Q types)
AF95-43
Code
Used with
AR9C017-R
AR22V2R, V2L
AR30V2R, V2L
AR9C008-R
AR22V4R
AR9C010-
AR22Q2R
AR30Q2R
AR9C019-R
AR22VAL
Lever
Replace the
Code
Used with
AR9M007-
AR22WR, WCR, WY, WCY
AR30WR
Replace the
mark by the lever color code
Color
Black
Green
Red
Code
B
G
R
mark by the button color code
AF95-42
Color
Green
Red
White
Yellow
Code
G
R
W
Y
Color
Orange Blue
Black
Code
A
B
Cylindrical knob
S
AF95-31
Dust-tight
case
Code
Used with
AR9D001-1
AR9D001-2
AR9D002-1
AR9D002-2
AR22, 1NO+1NC
AR22, 2NO+2NC
AR30, 1NO+1NC
AR30, 2NO+2NC
Code
Used with
AR9M008-
AR22RR, RCR, RY, RCY
Replace the
mark by the konb color code
Color
Black
Green
Red
Code
B
G
R
AF95-44
Key
Code
Used with
AR9C022-
AR22JR, JCR, AR30JR, JCR
Replace the mark by the key type code.
Code: A, C, D, E or F, 5 types.
AF94-464
Knob
(For illuminated
selector switch)
AF94-465
Code
Used with
AR9M005-
AR22PL, PP
AR30PL
Replace the
mark by the lens color code
Color
Green
Red
White
Yellow
Code
G
R
W
Y
Color
Orange Blue
Code
A
S
Pushbuttons/Selectors/Pilot Lights
AR22/DR22 and AR30/DR30
Accessories
Description
Type
Description
Type
Legend plate
(For F type with
round bezel)
AR9P001-W
LED lamp
Lamp voltage
Ordering code
6V AC
6V DC
12V AC/DC
15V AC/DC
24V AC/DC
DH9L510-A
DH9L510-6
DH9L510-B
DH9L510-C
DH9L510-E
Note:
This part is made of acrylic resin. Use
paint or thinner compatible with resin.
Replace the
code
AF94-459
Legend plate
(For E type with
round bezel)
mark by the luminous color
AR9P002-W
Note:
This part is made of acrylic resin. Use
paint or thinner compatible with resin.
Luminous
color
Yellow
Red
Green
Code
Y
R
G
Lens color
Y
R
G
Luminous
color
Amber
Orange Blue
Code
A
A
S
Lens color
A
W, A
S
AF94-459
Legend plate and
color plate
(For F type with
square bezel)
DR9P241Replace the
mark by the lens color code
Color
Green
Red
White
Yellow
Code
G
R
W
Y
AF94-463
Color
Orange Sky-blue
Code
A
Incandescent lamp
S
Note:
1. This part is made of acrylic resin.
Use paint or thinner compatible with
resin.
2. White legend plates are used for
DR22F3M type.
Orange is available only for the DR22F4M
pilot light.
Lamp voltage
Ordering code
5V AC/DC
24V AC/DC
DH9H135
DH9H129
AF89-427
Contact block (1NO)
Standard:
Overlap:
AR9B290
AR9B290-S
Standard:
Overlap:
AR9B291
AR9B291-S
AF94-460
Legend plate and
color plate
(For E type with
square bezel)
AR9P003-W
Note:
This part is made of acrylic resin. Use
paint or thinner compatible with resin.
AF94-455
Contact block (1NC)
AF94-460
Legend sheet
AH9Y727
Affix this seal to the DR9P241- /AR9P003
legend plate for marking or labeling.
(Thickness: 0.025mm)
AF94-455
Lamp terminal
AF95-34
AR9B292
AF94-456
Transformer unit
AF94-457
AF95-33
Primary voltage
Ordering code
100 to 110V AC:
115 to 127V AC:
200 to 220V AC:
230 to 254V AC:
350 to 380V AC:
400 to 440V AC:
500 to 550V AC:
AR9T511-H
AR9T511-L
AR9T511-M
AR9T511-Q
AR9T511-S
AR9T511-T
AR9T511-W
Pushbuttons/Selectors/Pilot Lights
AR22/DR22 and AR30/DR30
Accessories
Description
Type
Base unit for
transformer
separate mounting
AR9T003
Resistor
Voltage stabilizer
Device for LED
lamp flickering
Use this base in combination with a
transformer unit. This base unit can be
mounted using screws or rails.
Resistor: AR9T519-H (110V DC)
Fit this resistor when using LED
of 24V DC rating with 110V DC power.
Voltage stabilizer: AR9T001-E
This unit allows an LED lamp of 24V DC
rating to be used in a circuit with voltage
from 27V to 35V (AC or DC).
AF95-33
Locking nut
Flickering device:
6V AC:
AR9T002-A
6V DC:
AR9T002-6
12 to 24V AC:
AR9T002-G
12 to 24V DC:
AR9T002-E
AR9R744: For all AR22 and DR22
AF94-462
Packing
AR9R001: For AR30F0R, F5R, E0R, E5R,
AR30E0L, E5L,
DR30D0L, E3L, K0L
AR9R002: Other than above
AR9Y730: For all AR22 and DR22
AH9Y282: For all AR30 and DR30
(Resin-standerd)
AF94-462
Terminal cover
AH9Y149: For all AR30 and DR30
(Rubber)
Ordering
code
Used with
AR9Y305
Contact block
Lamp terminal
Transformer unit
DR9Y320
Pilot light
AF94-466
Terminal cover
IP2X terminalcompatible products
AR9B290-D (For NO contact)
AR9B291-D (For NC contact)
For transformer unit
Primary voltage
Ordering code
100 to 110V AC
115 to 127V AC
200 to 220V AC
230 to 254V AC
350 to 380V AC
400 to 440V AC
500 to 550V AC
AR9T511-HD
AR9T511-LD
AR9T511-MD
AR9T511-QD
AR9T511-SD
AR9T511-TD
AR9T511-WD