SINGLE-PHASE SINGLE-PHASE SINGLE-PHASE PUMP PROTECTIO PUMP PROTECTION PUMP PROTECTIO ForFor 2- & single-phase motors, 1/3 1/3 to 1.5 hp. 2&& 3-wire single-phase motors, 0.37 1.1hp. kW. For 2-3-wire 3-wire motors, toto1.5 Pumptec aamicrocomputer-based pump protection device. Pumptec is ais microcomputer-based pump protection device. It monitors Pumptec is microcomputer-based protection device. It monitor motor loadload andmotor power lineand conditions to provide protection against dry dry Itmotor monitors load power line conditions to provide and power line conditions to provide protection against wellprotection conditions, waterlogged tanks, and abnormal line voltage conditions. against dry well conditions, waterlogged tanks, and condition well conditions, waterlogged tanks, and abnormal line voltage Pumptec interrupts power to the motor whenever the the loadpower drops Pumptec interrupts power to the motor whenever load drops quickl abnormal line voltage conditions. Pumptec interrupts toquickly or below a preset level. Indicator lights on the cover provide complete or below awhenever preset level. Indicator lights on the cover complete the motor the load drops quickly or below aprovide preset system status. system status.lights on the cover provide complete system level. Indicator status. Additional features: Additional features: Additional features: • Easily Adjustable Sensitivity Settings • Easily Adjustable Sensitivity Settings • • Easily Adjustable Sensitivity Settings • Run andand Fault Indicator Lights Run Fault Indicator Lights • • Run andDuty Fault Indicator Lights • Heavy Duty Relay Heavy Relay • • Heavy Duty Relay • Alarm Circuit Contacts Alarm Circuit Contacts • • Alarm Circuit Contacts • Remote Control Option Remote Control Option • Remote Control Option • UL/CSA Listed • UL/CSA Listed • UL/CSA Listed/CSIPR14 Remote Communication Remote Communication Remote Pumptec alsoCommunication features an option for for Pumptec also features an option Pumptec also features anWith option for remote communication. With software remote communication. software remote communication. With software available from Franklin Electric, a available from Franklin Electric, a available Franklin Electric, aan an Pocket PC PC orfrom Palm OS OS device withwith Pocket or Palm device infrared port can be used to remotely Pocket PC orcan Palm device withmonitor an monitor infrared infrared port beOS used to remotely andport adjust Pumptec Access to aand 15-event can bePumptec used settings. to remotely monitor and adjust settings. Access to a adjust 15-event faultPumptec history makes diagnosis of system problems fault history makesAccess diagnosis system problems settings. to aoffault history makes quick andand easy. quick easy. diagnosis of system problems quick and easy. ForFor installations upup to to 5tohp. For installations up 5 hp. installations 3.7 kW. TheThe Pumptec-Plus solid state pump protection system is is The Pumptec-Plus solid state pump protection system Pumptec-Plus solid state pump protection system designed for 1/2 to0.37 5to hp5tosingle-phase submersible pump forfor1/2 hp submersible pump isdesigned designed 3.7single-phase kW single-phase submersible motors. Pumptec-Plus protects against a variety of motors. Pumptec-Plus protects against a variety of fault pump motors. Pumptec-Plus protects against a fault variety conditions. Run and fault lights on the cover make diagnosis conditions. Run and fault lights the on cover of fault conditions. Run and faulton lights themake coverdiagnos TM TM quick anddiagnosis easy. Push button Snap Shot calibration quick and easy. Push button Snap Shot calibration make make quick and easy. Push button Snapmakes TM Pumptec-Plus simple to install and an effective Pumptec-Plus simple to install and an effective Shot calibration makes Pumptec-Plus simple to troubleshooting troubleshooting tool. troubleshooting tool. install and antool. effective Additional features: Additional features: Additional features: • Push Button Calibration • Push Button Calibration • Push Button Calibration • Run and Fault Indicator Lights Run and Fault Indicator Lights • •Run and Fault Indicator Lights • Heavy Duty (30A) Contactor Heavy Duty (30A) Contactor • •Heavy Duty (30A) Contactor • Works with PSC, Split-phase CSCR and CSIR motors Works with PSC, Split-phase CSCR and CSIR motors • •Works with PSC, Split-phase CSCR and CSIR motors • UL/CSA Listed UL/CSA Listed • •UL/CSA Listed/CSIPR14 UMP PROTECTION PUMP PROTECTION ATBEST ITS BEST T ITS acts are clear and so are the choices. Franklin Electric’s Pumptec family provides the high The facts are clear and so are the choices. Franklin Electric’s Pumptec family provides the mance pump protection you need deep down in the well. Designed to monitor motor load high performance pump protection you need deep down in the well. Designed to monitor upply voltage and to shut down the pump to prevent damage, Pumptec family products motor load and supply voltage and to shut down the pump to prevent damage, Pumptec ct your water system investment. family products protect your water system investment. tec, QD Pumptec, and Pumptec-Plus are the only single-phase load monitoring devices Pumptec Pumptec-Plus are motors. the only They single-phase load monitoring devices designed ned specifi cally forand Franklin single-phase cover a broad range of ratings and specifically for Franklin single-phase motors. They cover a broad range of ratings and fault conditions: conditions: QD PUMPTEC • • • • Gas Locked Pump (Cavitation) Air or Gas Locked Pump (Cavitation) en Shaft or Coupling Broken Shaft or Coupling ged Well Screen Clogged Well Screen in Water Level Voltage Yield Wells d Cycling Faulty Check Valve High Voltage Low Voltage • • • Rapid Cycling Pump Parts • • • • • • • • Low Yield Wells r Logged Tank • PUMPTEC-PLUS PUMPTEC-PLUS • y Check Valve Drop in Water Level Voltage PUMPTEC PUMPTEC • • • • • • • • • • • • • • • • • • • • Water Logged Tank • • Worn Pump Parts • • or Franklin QD Control Boxes. xclusively designed for Franklin QD Relay Control Boxes, QD Pumptec is solid state sensing device that monitors motor load and incoming power o automatically shut off a Franklin single-phase, 3-wire motor when related ault conditions are detected. QD Pumptec protects the life of your 4-inch ump and reduces the odds that you will ever have to see the motor again. D Pumptec allows the user to choose the standard factory calibration for nderload or to calibrate to a particular system. Control knobs make it easy o adjust sensitivity and timeout settings. D Pumptec easily plugs into 3-wire QD Relay Control Boxes in minutes, ithout additional wiring or tools. • • • • • • • • • • • Pumptec Family Family Specifications Pumptec Specifications Pumptec Family Specifications PUMPTEC PUMPTEC-PLUS QD PUMPTEC PUMPTEC PUMPTEC PUMPTEC-PLUS QD PUMPTEC PUMPTEC-PLUS QD PUMPTEC PUMPTEC Model5800070600 Number l Number Model Number 5800020600 5800020600 5800070600 l Number 5800070600 ating 1/3 to 1 HP Rating Rating 5800020600 1/3 to 1 0.37 to 1.11/3 kWto 1.5 ating 1/3 to 1 ge Rating VoltageVoltage 230Rating V Rating 230 V ge Rating 230 V ency 60 Hz Frequency Frequency 60 Hz PUMPTEC-PLUS 5800060100 (60 Hz) 5800060100 (60 Hz) 5800060502 5800020600 5800060500 (50 Hz) 5800060500 (50 Hz) 5800060100 (60 Hz) 5800060500 (50 Hz) 1/2kW to 5 1/3 to 1.50.37 to 3.7 1/2 to 5 1/3 to 1.5 1/2 to 5 60 Hz - 230 V 60 Hz - 230 V 50 Hz - 220 V 50 Hz - 220 V 60 Hz - 230 V 50 Hz - 220 V 50 or 60 Hz 50 or 60 Hz 115VV / 230 V 115 V / 230 115 V / 230 50 V Hz - 230 V 115 V / 230 V 50 50 / 60 Hz 50 / 60 Hz / 60 Hz 50 Hz ency 60 Hz 50 / 60 Hz 50 or 60 Hz ting Location InsideLocation Franklin Inside QD Control BoxQD Indoor/Outdoor Indoor/OutdoorIndoor/Outdoor Mounting Location Franklin Control Box Indoor/Outdoor Mounting Indoor/Outdoor Indoor/Outdoor ting Location Inside Franklin QD Control Box Indoor/Outdoor Indoor/Outdoor ator LightsIndicator No Yes Load/Voltage/Status Yes - Load/Voltage/Status Lights No Yes Load/Voltage/Status Yes - Load/Voltage/Status Indicator Lights Yes - Load/Voltage/Status Yes - Load/Voltage/Status ator Lights No ote (IR) Accessible RemoteRemote (IR) No Accessible No (IR) Accessible ote (IR) Accessible No onse TimeResponse 3 Seconds Time Response Time Yes Yes - Load/Voltage/Status Yes Yes No Yes 3 3 Seconds 3 Seconds Seconds Yes - Load/Voltage/Status No No No 3 3 Seconds 3 Seconds Seconds 3 Seconds onse Time 3 Seconds 3 Seconds 3 Seconds Adjustable: Adjustable: or Adjustable: Adjustable: Adjustable: Manual or Adjustable: Adjustable: Manual orManual Adjustable: Time Reset Time Reset2Time to 240 min. 2 to 240 min. 2 to 120 min. (240 1 to 256 min. 1 to 256 min. 2 tow/remote) 120 min. (240 w/remote) 2 to 120 min. (240 w/remote) 1 to 256 min. Adjustable: Adjustable: Manual or Adjustable: Time 2 to 240 min. 2 to 120 min. (240 w/remote) 1 to 256 min. Contact Rating N/A 1 Amp 115 V / 230 V 115 V / 230 N/A Alarm Contact Rating N/A 1 Amp V N/A Alarm Contact Rating 1 Amp 115 V / 230 V N/A Contact Rating N/A 1 Amp 115 V / 230 V N/A r/Overvoltage Under/Overvoltage Under/Overvoltage 2 minutes 2 minutes 2 minutes 2 minutes 2 minutes 2 minutes 2 minutes 2 minutes out Time-out r/Overvoltage Time-out 2 minutes 2 minutes 2 minutes out ating Temp Range Temp -15 °F to 130 °F-15 °F to 130 °F -15 °F to 130 °F-15 °F to 130 °F -15 °F to 140 °F-15 °F to 140 °F Operating Range Operating Temp Range ating Temp Range -15 °F to 130 °F tivity Adjustment ± 20% Sensitivity Adjustment ± 20% Sensitivity Adjustment tivity Adjustment ± 20% voltage Trip Overvoltage +10% Trip +10% voltage Trip +10% rvoltage Trip Undervoltage-10% Trip -10% Overvoltage Trip rvoltage Trip Undervoltage Trip -10% -15 °F to 130 °F -15 °F to 140 °F N/A N/A 40 to 90% SFL* +10%* +10%* N/A +10% +10% +10% -10% -10% 40 to 90% SFL* +10%* -10%* table with* remote Adjustable with remote table with remote -15 °F to 140 °F -15 °F to 130 °F 40 to 90% SFL*40 to 90% SFL* +10%* -10%* -10%* N/A -10%* +10% -10% -10% * Adjustable with remote Franklin Electric (Aust) Pty Ltd 106-110 Micro Circuit Dandenong South, 3175 400 East Spring400 Street, INVic 46714 EastBluffton, Spring Street, Bluffton, IN 46714 Tel: +61 3 9799 5000 Tel: 260.824.2900 Fax: 260.824.2909 Tel:• 260.824.2900 • Fax: 260.824.2909 400 East Spring Street, Bluffton, IN 46714 www.franklin-electric.com www.franklin-electric.com Toll Free: 1300 FRANKLIN Tel: 260.824.2900 • Fax: 260.824.2909 franklin-electric.com.au www.franklin-electric.com FE197 M1409 07/07