KEVIN QUINN FALL PROTECTION and confined space Full Body Harnesses................................................... 52-53 Shock Absorbing Lanyards............................................... 54 Work Positioning Lanyards / Devices............................... 54 Anchorage Connectors.................................................... 54 Rope / Cable Grabs and Horizontal Lifeline Systems....... 54 Rescue Systems.............................................................. 55 Self-retracting Lifelines............................................... 55-56 Confined Space Equipment and Accessories............ 56--58 Vehicle Hitch Mount Systems and Winches............... 58-59 Blower / Ventilation Systems...................................... 59-60 Ladder Climbing Equipment............................................ 60 Roof Kits, Anchors and Accessories........................... 60-61 ExoFit™ Harness • Wraparound no-tangle design slips on like a vest and has a breathable Aero-Spacer™ DriLex® lining that immediately draws moisture away from the body keeping the worker dry and comfortable • Lycra® edging, soft, lightweight polyester webbing and built-in shoulder, hip and leg padding • Adjustable non-slip chest strap with one-handed quick connect buckles and torso buckles to complete the five-point adjustment system • Back D-ring for connection to fall protection systems • Coated hardware for corrosion resistance • Conforms to CSA standards and meets or exceeds all applicable industry standards including OSHA and ANSI Kevlar® High Temperature Full Body Harness • Delta No-Tangle™ design holds the shape of the harness • Kevlar® and Nomex® webbing • Standard with spring loaded “stand-up” back D-ring • Pass-thru strapping and rear dorsal D-ring • CSA compliant • Please contact your safety specialist for work suitable configurations dbi 1104625c dbi 1105475c With loop belt With non-conductive / spark hardware and loop belt DBI 1107975C ExoFit™ derrick Harness • Wraparound no-tangle design slips on like a vest and has a breathable lining that draws moisture away from the body keeping the worker dry and comfortable • Lycra® edging, soft, lightweight polyester webbing and built-in shoulder, hip and leg padding • One-handed quick-connect buckles, tongue buckle leg straps for fast and easy donning and torso buckles that complete the five-point adjustment system • Back D-ring with 18” extension • Belt has back D-ring, mating buckles to connect to harness and two fixed front D-rings for positioning • Seat sling with positioning / suspension D-rings to reduce fatigue • Coated hardware for corrosion resistance • Conforms to CSA standards and meets or exceeds all applicable industry standards including OSHA and ANSI • Sizes small to X-large dbi 1100300c dbi 1100301c dbi 1100302c dbi 1100303c • Delta No-Tangle™ design holds the shape of the harness • Lightweight polyester webbing • CSA compliant • Available in several D-ring configurations to comply with fall arrest, work positioning, ladder climbing and / or confined space entry • Available with an integral shock pack sewn on the back • Please contact your safety specialist for work suitable configurations PART # D-RINGS LEG STRAPS DBI 1102000C Rear dorsal Tongue and buckle dbi 1103321C Rear dorsal and side Pass-thru FALL PROTECTION • Delta No-Tangle™ design holds the shape of the harness • Lightweight polyester webbing • CSA compliant • Available in several D-ring configurations to comply with fall arrest, work positioning, ladder climbing, and / or confined space entry • Available with an integral shock pack sewn on the back • Please contact your safety specialist for work suitable configurations PART # D-RINGS DBI 1102010C dbi 1103270C Rear dorsal and front Rear dorsal, front and side LEG STRAPS Pass-thru Pass-thru Small Medium Large X-large Vest Style Full Body Harness 52 CrossOver Style Full Body Harness TREND-X CROSS CHEST HARNESS • CSA class APDL for fall arrest, ladder climbing, descent and work positioning applications • Cross-chest design • Large back D-ring for easier lanyard attachment • Adjustable leg and shoulder straps • Lightweight polyester webbing • CSA approved and ANSI / OSHA compliant • D-rings: (1) back (1) front (2) side NOR FP7224dp 1 888 522 9822 SAFETY SOLUTIONS | 08 RITE-ON Comfort Harness Gravity™ Vest Style Harness • One-piece back and shoulder pad provides all-day comfort and retains the shape of the harness making it easy to don • Universally sized • Quick-release buckles at chest and legs • D-rings: • Nylon webbing with fully adjustable back D-ring and / or configurations available to comply with fall arrest and / or work positioning • Qwik-fit™ adjustable leg buckles • CSA compliant (1) back (1) back / extender (2) side (1) sternal PART # D-RINGS msa SSH30420060 msa SSH30425060 NOR FP81F4EDLA Real dorsal and front Rear dorsal and front leg straps Qwik-fit™ Tongue and buckle Derrick Harness • Specifically designed for the derrick worker • Built-in integral shock absorber and belt with 4” web support and rear D-ring • Saddle with side D-ring • Complies with fall arrest and work positioning • CSA compliant • Qwik-fit™ leg buckles, belt and saddle VEST-STYLE SIZED HARNESS • CSA class A for fall arrest • Lightweight with compact fittings • Nylon webbing offers a soft feel for improved comfort as well as superior resistance to abrasion and alkaline chemicals • ANSI / OSHA compliant • D-rings: MSA SSH31535C364 MSA SSH31535D364 Medium Large TechnaCurv® Harness (1) back (1) extended on back • Vest type harness with curvilinear torso webbing that curves the webbing around the neck area to help prevent chafing and discomfort • Adjustable Y-back “D” locator pad • Meets or exceeds applicable OSHA regulations and ANSI standards and is CSA certified • Teflon® coated webbing • Secure-fit buckle designed to ease donning, doffing and adjustment and allows for single hand operation • Qwik-fit chest buckle and tongue leg buckles • Sizes small to X-large NOR FP7001ed(size) VEST-STYLE UNIVERSAL HARNESS • CSA group A • Lightweight polyester harness with back D-ring for fall arrest • Adjusters on the shoulder straps • Universal pass-through buckles and quick connect buckles • Meets or exceeds CSA Z259.1.0-M90 and ANSI Z359.1 standards MSA 10041599 NOR FP7591dp Gravity™ CrossOver Harness • Unique cross-over design • Nylon webbing with fully adjustable back D-ring and / or configurations available to comply with fall arrest and / or work positioning • Qwik-fit™ adjustable leg buckles • CSA compliant PART # D-RINGS msa SSH809200000 msa SSH909200000 Rear dorsal, front and side Rear dorsal and front SAFETY SOLUTIONS | 08 Additional Product Options are Available in Stock. www.csinet.ca FALL PROTECTION 53 EZ Stop® II Soft Cover Shock Absorbing nylon Lanyard • • • • FIXED ANCHORAGE CONNECTOR • Bolt on D-ring • Mounting hardware required • 4-1/4” gate opening 1” polyester webbing Self-locking snap hooks at both ends EZ Stop® II shock absorber CSA Z259.1 and .11 certified DBI 1220007C DBI 1220030C DBI 1220006C nor FP3730 3’ 4’ 6’ Spectra® Web Loop Sling EZ Stop® II Soft Cover Shock Absorbing cable Lanyard • • • • • Lightweight, small size and exceptional strength • 1” web that withstands UV exposure NOR FP2422 NOR FP2424 NOR FP2426 7/32” vinyl coated cable Self-locking snap hooks at both ends EZ Stop® II shock absorber CSA Z259.1 and .11 certified DBI 1220704C DBI 1220706C 2’ 4’ 6’ LAD-SAF® Rope Grab System 4’ 6’ • 5/8” rope grab comes with: 50’ lifeline with flexible counterweight 3’ EZ Stop® II shock absorbing lanyard 3’ tie off adapter Carrying bag Sure-Stop™ Shock Absorbing Lanyard • CSA certified • 1” nylon webbing • Clear shock absorber cover protects labels • Available in single or twin-leg configurations and 5/8” nylon rope or 1/4” wire rope • CSA Z259.1 certified • 6’ long PART # SNAP HOOKS LADDER HOOKS msa SWL40400206LS msa SW40400206LSH Three One None Two DBI 5003050 DBI 5003100 50’ lifeline 100’ lifeline Sayfline™ Cable Horizontal Lifeline System • Cable lifeline assembly with turnbuckle to tension, Zorbit™ shock absorber and cable grab • 20’ galvanized cable DBI 7602020 Rebar Assembly • Used for work positioning on ladders or towers • NOT intended for fall arrest PART # LADDER SNAP TYPE HOOKS HOOKS msa 10044811 msa SCH3187511 msa 415989 Two One None One Two Three Chain Web Chain Sayfline™ Portable Horizontal Lifeline System • 20’ rope lifeline assembly with tensioner and two tie-off adapters • Carrying / storage bag included DBI 7600020 Rope positioning Lanyard • Nylon 5/8” three-strand filament rope with five-tuck splice ends • Self-locking snap hooks at both ends • CSA Z259.1 and .11 certified • NOT intended for fall arrest DBI 1202334C DBI 1202361C DBI 1202373C DBI 1202386C DBI 1202392C DBI 1202403C DBI 1202419C 54 FALL PROTECTION 4’ 6’ 8’ 10’ 12’ 15’ 20’ TEMPORARY HORIZONTAL LIFELINE KIT • Lifeline made of galvanized steel cable which resists wear and tear found in severe environments • Comes with: 60’ of 3/8” galvanized cable (1) Soft Pak energy absorber (2) anchor slings, cable tensioners and cable clips (2) carabiners NOR FP1002 1 888 522 9822 SAFETY SOLUTIONS | 08 Rollgliss® Rope Rescue System Sealed Self-Retracting Lifeline • 50’ travel distance (200’ x 3/8” rope) • Comes with: • Stainless steel and cast aluminum housing with environmentally sealed inner components • Self-adjusting disk brake for reliability • Reserve lifeline system • Self-locking snap hook with impact indicator and swivel to prevent twisting • CSA Z259.2.1, Type 2 certified • All SRL’s over 10’ are CSA Type 2 certified and require annual recertification Pulleys R350 rope unit Rope control device Securing strap Anchoring sling Carabiners Carrying bag • 3:1 lifting ratio • Available in additional rope lengths and lifting ratios DBI 3403400C DBI 3403500C DBI 3403600C DBI 3400610C DBI 8902004 Rescumatic® Automatic Descent Control Device Kit • For safe, automatic, controlled descent from overhead cranes, towers, buildings or other heights • Descent rate at 3’ per second that automatically adjusts to user’s weight • Comes with: (2) Webbing support harnesses (1) 1-3/16” steel Saflok® carabiner Styrene rope spool Vinyl dust cover • Nylon 1” webbing lifeline with self-locking swivel snap hook and impact indicator • Quick connector handle • CSA Z259.2.1 certified • All SRL’s under 10’ are CSA Type 1 certified and do not require annual recertification Ultra-Lok® Web Self-Retracting Lifeline Comes with: Carabiner Upper anti-reversing double pulley Right-handed ascender (standard) Securing rope with carabiner Lower anti-reversing double pulley 7/16” static kermantle rope • Tough glass-filled polyurethane housing with aluminum side plates, anti-ratcheting brake, and swivel anchorage loop • Reserve lifeline retention system and self-locking snap hook with impact indicator • 1” nylon web lifeline • CSA Z259.2.1, Type 2 certified • All SRL’s over 10’ are CSA Type 2 certified and require annual recertification • 4:1 mechanical ratio • Maximum rope length: 800’ • Comes with standard rope length of 200’ MSA SRS15200 DBI 3103108C DBI 3103208C Ultra-Lok® Cable Self-Retracting Lifeline • Tough glass-filled polyurethane housing with aluminum side plates, anti-ratcheting brake, and swivel anchorage loop • Reserve lifeline retention system and self-locking snap hook with impact indicator • 3/16” wire rope lifeline • CSA Z259.2.1, Type 2 certified • All SRL’s over 10’ are CSA Type 2 certified and require annual recertification DBI 3504433C DBI 3504430C DBI 3504450C SAFETY SOLUTIONS | 08 8’ 16’ 50’ 100’ 200’ Suretyman™ Rescue Utility System • Talon™ Web Self-Retracting Lifeline DBI 3101001C DBI 3101051C • Other rope lengths available DBI 3300050 DBI 3300100 DBI 3300200 50’ 85’ 130’ 175’ 10’ 20’ DURALITE SELF-RETRACTING Lifeline • • • • CSA Type 2 for fall arrest Tough polymer housing 3/4” Dyneema® / polyester webbing Swivel load indicating snap hook nor FP1306W 20’ 30’ 50’ www.csinet.ca FALL PROTECTION 55 Aptura™ Self-Retracting Lanyard LINE description LENGTH MSA 10045783 MSA 10045786 MSA 10061504 MSA 10053558 MSA 10058886 10’ 10’ 10’ 30’ 30’ • Includes: Adjustable locking legs Non-slip rubber safety shoes with spiked edges Safety chains • Field replaceable, lightweight and durable thermoplastic housing • Available with integral load indicator and swivel connector • CSA Z259.2 certified PART # Aluminum Tripod DBI 8000000 DBI 8000010 None None Swivel line connection None Load indicator 7’ 9’ Pulley Assembly • Pulley assembly for routing lifeline over entry area • More than one may be required • Option for wall mount bracket (8004176) DURALITE III SELF-RETRACTING Lifeline DBI 8004187 • CSA Type 1 for fall arrest and is serviceable • Lightweight and a favourite for workers using telescoping poles or first man up systems • Braking system senses when a worker has fallen and will lock up only when the worker is travelling to or away from the anchor • Dyneema® / polyester webbing • Composite housing with swivel load indicating snap hook • CSA Z259.2 certified and exceeds OSHA and ANSI requirements including ANSI Z359.1 NOR FP1303W Leg Mount Pulley • Aluminum • Attaches to tripod leg for routing the back-up winch or SRL cable DBI 8003238 10’ Tripod Mounting Base • Attaches to tripod leg for mounting winch or SRL units Tension Limiter Kit DBI 8005048 • Connects in-line between person being raised and winch line to act as a safety link • High visibility yellow line deploys under load • Up to 30 ‘ of line • Device automatically resets itself after load has been removed • Portable, lightweight and durable • Includes tension limiter, boatswain chair harness, 4” carabiner and black Pelican™ case Wallmount Bracket KIT TENSIONLIMITER • Mounting bracket base for winch or SRL DBI 8004176 Winch / SRL / Tripod Combination • Comes with: Snatch Block 50’ self-retracting lifeline Salalift® winch Tripod Snatch block Leg mounts Mounting base Carrying bag • Steel • Attaches to the tripod eye bolt for routing the back-up winch or SRL cable DBI 8003205 • Other configurations available DBI 8304000 56 FALL PROTECTION 1 888 522 9822 SAFETY SOLUTIONS | 08 Davit Arm Lower Mast / Extension • 5000 lb. minimum strength from any anchorage point • Back-up anchorage points, winch or SRL mounting brackets and pulley to route lifeline • Anodized aluminum and zinc plated steel davit arm • For use only with Advanced Series Davit • Combine up to two lower mast extensions to increase the anchorage height UCL 8518002 UCL 8518003 33” 45” DBI 8004030 Davit Base • Free-standing portable base with height adjustable feet • Locking pins for legs and wheels for transport Core Mount Sleeve Fixed Base DBI 8003930 • Designed for slip-in installation into 4” diametre core hole in concrete or in an existing steel structure • Comes with PVC sleeve liner Base Assembly UCL 8510109 UCL 8510110 Zinc plated finish 304 stainless steel finish • Permanent base constructed of galvanized steel DBI 8004031 DBI 8004032 Steel mount Cement mount Advanced Floor Mount Sleeve Fixed Base • Optional zinc plated mild steel, hot-dipped galvanized steel or stainless steel construction with PVC sleeve liner • Mounts to horizontal concrete or steel structure Advanced series 5 Piece Hoist System UCL 8516190 UCL 8518347 UCL 8518503 • Modular design allows manageable component storage, transportation and set up for a variety of configurations and applications • Multiple winches and / or lifeline systems may be mounted as required • 12” to 29” adjustable offset mast • 33” lightweight lower mast • Three piece lightweight base Zinc plated finish 304 stainless steel finish Hot-dip galvanized finish Advanced Wall Mount Sleeve Fixed Base UCL 8518000 Davit Arm • Lightweight aluminum construction attaches quickly to the anchor post • Accommodates typical winch / SRL with the appropriate mounting bracket • Optional zinc plated mild steel, hot-dipped galvanized steel or stainless steel construction with PVC sleeve liner • Mounts to vertical concrete or steel structures for minimum intrusion to work spaces UCL 8516191 UCL 8518348 UCL 8518504 Zinc plated finish 304 stainless steel finish Hot-dip galvanized finish UCL 8516693 Portable Fall Arrest System Anchor Post • Provides three independent swivel tie-off points for fall arrest anchorage • Aluminum three stage / four position telescoping design with leveling screws that collapse into one single piece • Horizontal lifeline capabilities • Padded carrying / storage bags available Upper Davit UCL 8518001 UCL 8518006 12” to 29” 30” to 48” UCL 8516691 SAFETY SOLUTIONS | 08 www.csinet.ca FALL PROTECTION 57 Bare Steel Anchor Plate Multi-Directional Bumper Receiver • For use in closed environments without chemical or moisture exposure • Installs between a standard model hitch mount sleeve (or hitch mount sleeve extension) and attendant vehicle • For uneven ground conditions at site UCL 8517412 UCL 8510816 UCL 8517413 UCL 8517433 With tie-off anchor Standard plate For inclined surfaces w/ tie-off anchor For inclined surfaces UCL 8511401 Hand Winch Carrying Bag UCL 8518513 UCL 8515096 UCL 8517565 UCL 8517569 UCL 8517411 UCL 8517567 For 5 piece hoist system For upper davit and lower mast extension For portable anchor post For davit arm with mounted winch For basic series winches, w/ heavy-duty dual handles For Digital 200 or 300 winches, w/ heavy-duty dual handles Advanced series 5 Piece Equipment Cart • Transports the UCL Advanced 5 Piece System with maximum ease over smooth or rough terrain • Weighs 40 lbs. (8.9 kg) • For Advanced Series upper masts UCL 8518270 • Built-in fall-stop protection when used with a rope control device • Simplifies hauling, retrieval and ascension • Secures to any tripod • Accessory for the Rollgliss® system DBI 8900251 SALALIFT® II Winch • Lightweight work support and rescue device with 6:1 gear ratio and an average lifting speed of 12.75’ per minute • Free-wheel mode, overload clutch and safety hook with impact indicator • Polyethylene housing and quick-mount bracket • 60’ galvanized cable DBI 8102001 Basic Series Zinc Plated Winch Kit Vehicle Hitch Mount Sleeve assembly • Comes with: • Designed to provide portable anchor points using a 2” vehicle hitch receiver UCL 8510140 Quick plate adapter Durable, foldaway crank handle • 5.1:1 hub drive with an average speed of 30’ per minute • Comes with 3/16” x 50’ cable UCL 8518666 UCL 8518667 UCL 8518668 Galvanized steel cable Stainless steel cable Technora cord cable Wheel Kit • For use with vehicle hitch mount sleeves • For use on uneven or sloped surfaces UCL 8515188 Advanced Digital 100 Series 2 Speed Winch Kit • Complete assembly with removable aluminum crank handle utilizing both 9:1 and 4:1 drives with an average speed from 13’ per minute up to 30’ per minute • Comes with 3/16” cable Extension • For use with vehicle hitch mount sleeves UCL 8514503 UCL 8512829 UCL 8511384 58 FALL PROTECTION UCL 8518558 UCL 8518559 UCL 8518560 UCL 8518561 2’ 4’ 6’ 1 888 522 9822 70’ stainless steel cable 100’ stainless steel cable 70’ galvanized steel cable 100’ galvanized steel cable SAFETY SOLUTIONS | 08 Universal Material Handling Winch Centrifugal Blower System • Complete assembly with removable aluminum crank handle utilizing both 9:1 and 4:1 drives with an average speed from 13’ per minute for loads over 50 lbs. and up to 30’ per minute for loads under 50 lbs. • Comes with 1/4” x 70’ galvanized steel cable • The system includes a choice of Allegro’s® most popular centrifugal blowers • Comes with: UCL 8518706 6’ and 15’ of ducting Storage bag Saddle Vent® 90° elbow Universal mount • The centrifugal blower system offers lightweight portability with the highest output available Overload Protection Clutch • Overdrive protection clutch for use with the UCL Advanced Digital Series Power Drive Winch options • Tested drills recommended for use with these clutches UCL 8512935 UCL 8512936 alg 952012 alg 952004 alg 952050 alg 952005 alg 952008 Economy system Standard system High output blower system Gas 3-1/2 HP Briggs and Stratton system Air driven system 250 lb. working load 450 lb. working load Advanced Series Winch Mount Bracket AC Axial Blower • Blower: • Mounts directly to UCL basic and digital winches • Use with UCL Advanced hoists, davits, bases and accessories UCL 8516824 20 gauge cold rolled steel housing Flanged intakes with weld motor mount (5) Rubber feet Enclosed bottom panel Steel / chrome plated grill Glass reinforced polypropylene six blade fan Three-ply rubber belting carrying handle • Motor: 1/3 HP, 115 VAC, CSA approved • Ducting: Quick-Mount Bracket • For use with UCL winches • Designed to allow the winch to be removed from the bracket with ease UCL 8510222 Flat Back Adapter Bracket Yellow single-ply lightweight vinyl / polyester 150˚F temperature resistant with black weather trip Integrated nylon strap at both ends Non-collapsible retractable design Class 1 hard drawn spring steel wire helix ASTM 227 spec ALG 9514 ALG 951425 15’ ducting 25’ ducting • For use with DBI Sala® style winch / SRL DC Axial Blower UCL 8510207 • Blower: 20 gauge cold rolled steel housing Flanged intakes with weld motor mount (5) Rubber feet and enclosed bottom panel Steel / chrome plated grill Glass reinforced polypropylene six blade fan Three-ply rubber belting carrying handle • Motor: 12 VDC, 1/3 HP, CSA approved (C22.2 No. 113) • Ducting: Flat Back Adapter Bracket • For use with MSA®, Zoll, Rose / Surety and Wahlfeld 50’ SRL’s • Allows secure attachment of three-way units UCL 8514793 SAFETY SOLUTIONS | 08 www.csinet.ca Yellow single-ply lightweight vinyl / polyester 150˚F temperature resistant with black weather trip Integrated nylon strap at both ends Non-collapsible retractable design Class 1 hard drawn spring steel wire helix ASTM 227 spec ALG 950601 ALG 950625 15’ ducting 25’ ducting FALL PROTECTION 59 Axial Ventilation System Self-Closing Ladder Safety Gate • The system includes a choice of Allegro’s® most popular axial blowers • Comes with: 6’ and 15’ of ducting Storage bag Saddle Vent® 90° elbow Universal mount • The axial blower system offers lightweight portability with the highest output available from axial style blowers ALG 952006 ALG 952014 DC axial blower system AC axial blower system LAD-SAF® Flexible Cable System • Includes impact attenuator in top bracket, wire rope guides and bottom bracket • XXX – denotes cable length, e.g. LADSAF100 = 100’ system (up to 300’) • Sleeve ordered separately • Economical, reliable, easy to install, self-closing torsion springs swing gate • Gate arm, top rail and bottom rail are closely matched as required by OSHA • Standard universal hinge and adapter kits for surface mounting available • Powder coat safety yellow (PCY) • OSHA reference: 29 CFR 1910.23 PSD LSG18PCY psd LSG21PCY psd LSG24PCY psd LSG27PCY psd LSG30PCY psd LSG33PCY psd LSG36PCY psd LSG40PCY Swiveling Style Roof Anchor • Nail to secure to peak of roof • Remove when work is complete DBI LADSAFXXX DBI 3505694 DBI 3505695 Sure-Climb™ Temporary Cable System • Designed to provide fall protection when climbing or descending ladders or vertical structures up to 300’ in height • Available with integral shock absorber or energy absorbing top mounting bracket and adjustable line weight • 5/16” galvanized steel cable • Requires a stainless steel arrester • CSA certified MSA SFPLS354100 MSA SFPLS354200 16.75” x 20.5” opening 19.75” x 23.5” opening 22.75” x 26.5” opening 25.75” x 29.5” opening 28.75” x 32.5” opening 31.75” x 35.5” opening 34.75” x 38.5” opening 38.75” x 42.5” opening With 30’ Ultra-Lok® SRL With 50’ Ultra-Lok® SRL Metal / Wood Swiveling Style Roof Anchor • For use with 30’ or 50’ Ultra-Lok® SRL • D-ring for use with lifeline or lanyard DBI 2105683 100’ 200’ Detachable Roof Anchor • For open trusses, joists and rafters • Removable D-ring and clamp assemblies • Comes with flashing RUNGMASTER™ SYSTEM • Permanent vertical ladder system • Components are made from galvanized steel for maintenance-free operation • Comes with energy absorber which is built into the top bracket • Meets or exceeds applicable CSA, ANSI and OSHA requirements • Includes: (1) top bracket with built-in energy absorber (1) cable adjuster (2) cable grips *Intermediate cable supports (1) 20’ to 200’ galvanized cable (5/16”) Removable / Reusable Roof Anchor DBI 2103673 nor FP6000(SIZE) FALL PROTECTION Fits 2” x 4” Fits 2” x 6” to 2” x 8” Fits 2” x 10” to 2” x 12” • Chain and O-ring anchor connector • 25” long • Nail or bolt into place * Number of intermediate cable supports depends on the length of the system 60 DBI 2104540 DBI 2104541 DBI 2104542 1 888 522 9822 SAFETY SOLUTIONS | 08 Permanent Roof Anchor • Comes with flashing DBI 2103670 DBI 2103671 Fits 2” x 8” Fits 2” x 10” to 2” x 12” Single Mount Sheet Metal Roof Anchor • D-ring anchor connector • 22” long when flat • Nail to secure to metal roofs DBI 2103672 Roof Anchor Fall Protection Kit What has your catalogue done for you lately? Speak to one of our Safety Experts today if you can’t find what you’re looking for. • Complete roof anchor kit comes with: Delta No-Tangle™ harness Rope adjuster with shock absorbing lanyard 50’ lifeline assembly Counterweight Roof anchor (see listed model number) Carrying bag DBI 2104168 DBI 2104169 DBI 2104173 DBI 2104715 Toll Free 1 888 522 9822 With 2103673 roof anchor With 2103672 roof anchor With 2104540 roof anchor With 2104542 roof anchor COMMERCIAL SOLUTIONS OFFERS A FULL RANGE OF FALL PROTECTION TRAINING PROGRAMS AND SERVICES. CALL OUR EXPERTS FOR DETAILS. SAFETY SOLUTIONS | 08 www.csinet.ca FALL PROTECTION 61 Can’t find what you’re looking for? Need more information on a product? Use this space to make note of your questions or product requirements and call one of our experts today. Toll Free 1 888 522 9822