© Siemens AG 2014
RUGGEDCOM WIN
Wide Area Private Wireless Systems
Brochure
Edition
10/2014
siemens.com/ruggedcom
© Siemens AG 2014
Contents
2
Contents
Common features and benefits
3
RUGGEDCOM WIN base stations
4
RUGGEDCOM WIN7000, WIN7200
5
RUGGEDCOM subscriber units
6
RUGGEDCOM WIN5100, WIN5200
7
RUGGEDCOM power injectors
8
RUGGEDCOM RP100, RP110
9
Use cases
10
Order options
13
© Siemens AG 2014
RUGGEDCOM WIN
Common features and benefits
Siemens RUGGEDCOM WIN series of products is the first
broadband wireless product portfolio designed for
private networks, delivering the benefits of carrier-grade
4G technology to critical infrastructure applications in
harsh environments.
Standards based
◾ Based on the IEEE 802.16e family of standards and
third party validated to support interoperability with
other vendors.
Standalone mode
◾ Unique capability that allows RUGGEDCOM WIN products
to operate without an ASN gateway, reducing initial
capital outlay significantly, while maintaining features
such as GOOSE over the air and mobility.
Range/throughput
◾ The RUGGEDCOM WIN product family has built-in
mechanisms to ensure the system is delivering
maximum bandwidth for a given distance/coverage
requirement at all times.
Scale
◾ RUGGEDCOM WIN has been designed to cover vast
territories with embedded GPS synchronization to
reduce self-interference and maximize frequency reuse.
Quality of service
◾ RUGGEDCOM WIN has built-in quality of service to
enable operators to guarantee latency and throughput
enabling a mix of IT and OT applications.
Security
◾ The RUGGEDCOM WIN product family has the security
feature set to enable organizations that provide critical
infrastructure to be compliant with legal mandates and
security guidelines.
Mobility
◾ The RUGGEDCOM WIN product line is capable of maintaining
session persistence with real time applications in a
mobility environment at vehicular speeds.
Common features and benefits
3
© Siemens AG 2014
RUGGEDCOM WIN base stations
The RUGGEDCOM WIN7000 and RUGGEDCOM WIN7200
systems are powered by OFDMA radio technology,
which is robust in adverse environmental conditions
and enables Non-Line-Of-Sight (NLOS) operation.
Leveraging link adaptation algorithms, modulation
and coding are continuously adapted to prevailing
link conditions, ensuring an optimal balance between
robustness and efficiency.
Mobile WIMAX compliance
◾ Based on IEEE 802.16e standard and WIMAX Forum
Wave2 (MIMO) certification
Rated for harsh environments
◾ IEEE 1613, IEC 61850-3, Class 1 Div 2 / ATEX Zone 2,
MIL-STD 810F, MIL-STD 509.4 – salt fog
Long range
◾ Transmit and receive diversity combined with high
power for improved reach and NLOS performance
High bandwidth
◾ RUGGEDCOM WIN has two built-in radios operating on
the same frequency simultaneously (MIMO) to increase
bandwidth (up to 40 Mbps) and spectral efficiency
Volt/VAR Optimization
Capacitor
Bank
Control
RUGGEDCOM
RX1512
Switch
Control
Recloser
Control
RUGGEDCOM
WIN7200
RUGGEDCOM
WIN5200
RUGGEDCOM
RP100
IED
Switch
Control
RTU & Line
Monitoring
Distribution Substation
Power
Industrial Ethernet
RUGGEDCOM
RX1512
with Cellular
Line Module
Load Balancing
Multi-service field area network for smart grid applications
4
RUGGEDCOM WIN base stations
Demand
Optimization
G_RCM0_XX_00022
Distribution Substation
Fault Detection, Isolation & Restoration (FDIR)
Voltage
Regulator
Control
© Siemens AG 2014
RUGGEDCOM WIN7000
high power base station
RUGGEDCOM WIN7200
standard power base station
The RUGGEDCOM WIN7000 is a high power, broadband
wireless base station, compliant to the IEEE 802.16e
standard, designed for long range deployments in
licensed frequency bands in harsh environments.
The RUGGEDCOM WIN7200 is a lightweight broadband
wireless base station, compliant with the IEEE 802.16e
standard, also supporting unlicensed frequency bands
in harsh environments.
Available in a number of different frequency bands, the
RUGGEDCOM WIN7000 has been designed around delivering
maximum coverage where regulations permit high power
operation. The single sector design can accomodate as
many sectors as required at a given site, driven by
coverage, bandwidth and subscriber considerations.
The RUGGEDCOM WIN7200 is a single sector lightweight
base station that can be easily installed on poles, street
lamps or walls, and provides connectivity to fixed or mobile
end points. Connected via a single Power over Ethernet
(PoE) connection and easily provisioned, the RUGGEDCOM
WIN7200 reduces operational cost and complexity.
Specifications
RUGGEDCOM WIN7000
RUGGEDCOM WIN7200
Support of worldwide WIMAX deployments
1.X, 2.X and 3.X GHz bands
2.5, 3.5, 3.65, 4.9 and 5.8 GHz bands
Flexible configurations
Single cable power and Ethernet or
fiber optic interface
Single cable power and Ethernet interface
Power output
2 x 36 dBm output power
Width
Height
Depth
Net weight
290 mm (11.42 in)
756 mm (29.76 in)
195 mm (7.68 in)
15 kg
2 x 27 dBm output power for 2.X GHz and 3.X GHz
2 x 24 dBm output power for 4.9 GHz
2 x 21 dBm output power for 5.8 GHz
257 mm (10.12 in)
228 mm (8.98 in)
112 mm (4.41 in)
4 kg
RUGGEDCOM WIN base stations
5
© Siemens AG 2014
RUGGEDCOM subscriber units
Mobile WIMAX compliance
◾ Based on IEEE 802.16e standard and WIMAX Forum
Wave 2 profiles
Numerous applications and services
◾ Guaranteed data, VoIP, video and other
services based on advanced QoS
Excellent performance in NLOS conditions
◾ Overcoming multipath and deep fading, providing
extended range and easy installation
Robust hardware
◾ -40° C to +75° C temperature range
Automatic Transmit Power Control (ATPC)
◾ Optimal network deployment, tight frequency
reuse, and interference avoidance
Global availability
◾ Wide frequency band support for
deployments around the world
Gigabit Ethernet Ring
Industrial Ethernet
Control Room
RUGGEDCOM
WIN7200
RUGGEDCOM
WIN7200
RUGGEDCOM
WIN7200
G_RCM0_XX_00023
RUGGEDCOM
WIN5100
Fully integrated reliable wireless solutions offer broadband
data rates for real-time data access
6
RUGGEDCOM subscriber units
© Siemens AG 2014
RUGGEDCOM WIN5100
vehicular subscriber unit
RUGGEDCOM WIN5200
outdoor subscriber unit
The RUGGEDCOM WIN5100 is a broadband wireless
subscriber unit, compliant with the IEEE 802.16e
standard, with external RF connectors for use in fixed
or mobile applications in harsh environments.
The RUGGEDCOM WIN5200 is a broadband wireless
subscriber unit, compliant with the IEEE 802.16e
standard, with a built-in directional antenna for use
in harsh environments.
The self-learning subscriber device automatically detects
the base station on the best signal available, allowing
for plug-and-play installation and maintenance-free
operation. RUGGEDCOM WIN5100 comes with external
antenna connectors and can be ordered with an
optional 10 – 30 VDC input.
RUGGEDCOM WIN5200 greatly simplifies installation with
LEDs for signal strength alignment, automatic connection
to strongest serving base station and automated service
provisioning, based on authentication credentials. Specifically
designed for point-to-multipoint broadband wireless
access applications, the RUGGEDCOM WIN5200 provides
efficient use of the wireless spectrum, supporting a range
of applications.
Specifications
Antenna
Flexible configurations
Power supply
Width
Height
Depth
Net weight
RUGGEDCOM WIN5100
2 N-type antenna connectors for connection
to external omni or directional antenna
Designed for vehicular, cabinet or pole top
installations
Direct DC input (optional)
226 mm (8.9 in)
80 mm (3.15 in)
92 mm (3.62 in)
1.5 kg
RUGGEDCOM WIN5200
High gain integrated antenna
Designed for pole top installations
Single cable Power over Ethernet (PoE)
226 mm (8.9 in)
80 mm (3.15 in)
92 mm (3.62 in)
2.5 kg
RUGGEDCOM subscriber units
7
© Siemens AG 2014
RUGGEDCOM power injectors
◾ Rugged Rated, -40° C to +85° C temperature range
◾ IEEE 1613 and IEC 61850-3 compliance means
continued operation in harsh environments
◾ Supports a wide range of AC and DC input voltages
◾ Space-saving compact DIN rail design
◾ Reduces cabling, connection, and power supply
requirements for PoE devices
◾ Rated for 12, 24 – 48 VDC, 100 – 240 VAC, 125 – 250 VDC
provide stability and performance under high
levels of temperature variation, EMI stress, and
voltage fluctuation that occur in electrical and
industrial applications.
Safety and performance
RUGGEDCOM RP100 and RUGGEDCOM RP110 have
the same certifications as protection and control
devices providing the confidence and assurance of
continued operation even in the worst conditions.
Power over Ethernet
NEMA4X Cabinet
IED
Ethernet switch
or serial server
RUGGEDCOM Surge Arrestor
RP100 or RP110
AC or DC
Source
RUGGEDCOM RP100 or RUGGEDCOM RP110 designed to power
RUGGEDCOM WIN 5xxx or WIN72xx and to fit in any recloser cabinet
8
RUGGEDCOM power injectors
Power
Industrial Ethernet
CPE Unit
RUGGEDCOM
WIN5200
G_RCM0_XX_00025
RUGGEDCOM RP100 and RUGGEDCOM RP110
© Siemens AG 2014
RUGGEDCOM RP100
single port 802.3at Power over
Ethernet injector
RUGGEDCOM RP110
serial device server with 802.3at/af
Power-over-Ethernet injector
The RUGGEDCOM RP100 is a single port 802.3at Power
over Ethernet injector that provides the flexibility to power
remote PoE devices using standard Cat 5 cable.
The RUGGEDCOM RP110 is a serial 802.3at Power over
Ethernet injector with a built-in serial server, designed to
bridge legacy serial devices onto an IP network and to
power remote PoE devices, using standard Cat 5 cable.
Compatible with the latest 802.3at high-power PoE
standard and backward compatible with low-power
802.3af PoE devices, the RUGGEDCOM RP100 provides
versatility and investment protection to handle future
demands for increased power.
Performance
◾ Configuration-free, plug and play operation
◾ 802.3at/af-compliant or RM version for connection
to RUGGEDCOM WIN products
Network design flexibility
The RUGGEDCOM RP100 is a configuration free plug-and-play
device suitable for any Power over Ethernet connection,
supporting both IEEE 802.3af and 802.3at Power over
Ethernet standards in one box.
Specifications
RUGGEDCOM
RP100
Width
Height
Depth
Net weight
226 mm (8.9 in)
80 mm (3.15 in)
92 mm (3.62 in)
1.5 kg
RUGGEDCOM
RP110
Converging data and power into a single cable saves costs,
space and labor for new and existing installations.
In addition to a power injector, the RUGGEDCOM RP110
has a built-in serial server, designed to bridge legacy serial
devices into an IP network. It offers a single interface capable of supporting RS422, 485, and 232 protocols, and is
protocol aware for certain common serial protocols such as
DNP and Modbus.
Rugged Operating System (ROS®)
The RUGGEDCOM RP110 includes a subset of the features
of the industry leading ROS® operating system, including:
◾ Remote management and logging
◾ Serial IP encapsulation
◾ SNMP based network management
◾ Precision timing support
Serial ports
◾ 1 RS485/RS422 port and 1 independent RS232 port
◾ 1 IRIG-B Output
RUGGEDCOM power injectors
9
© Siemens AG 2014
Use cases
Electric utility multi-service WIMAX
Distribution Automation
RUGGEDCOM
WIN5200
HMI & Visualization
Mobile Workforce
RUGGEDCOM
WIN7200
RUGGEDCOM
WIN5100
AMI Backhaul
RUGGEDCOM
WIN5200
G_RCM0_XX_00041
AMI
Collector
RUGGEDCOM WIN multi-service solution
10
Use cases
© Siemens AG 2014
ITS wireless broadband
Industrial Ethernet (Fiber Optic)
RUGGEDCOM
WIN7200
RUGGEDCOM
RS900GP
RUGGEDCOM
WIN7200
RUGGEDCOM
RS900GP
Secure Stationary Access
RUGGEDCOM
WIN5100
Onboard Data
Terminal
Industrial Ethernet
RUGGEDCOM
WIN5200
RUGGEDCOM
RS900GP
G_RCM0_XX_00001
Secure Mobile
Wireless Access
Secure wireless broadband coverage for mobile and stationary applications
Use cases
11
© Siemens AG 2014
Siemens RUGGEDCOM WIN series
of products is the first broadband
wireless product portfolio designed
for private networks, delivering the
benefits of carrier-grade 4G technology
to critical infrastructure applications
in harsh environments.
12
Use cases
© Siemens AG 2014
RUGGEDCOM WIN order options
Use the new RUGGEDCOM-Selector for the
selection and configuration of RUGGEDCOM products.
With the RUGGEDCOM-Selector you can then
transfer the order number to the Siemens
Industry Mall and order your products.
RUGGEDCOM-Selector:
http://www.siemens.com/ruggedcom-selector
For more information, visit:
http://www.siemens.com/ruggedcom
Order options
13
© Siemens AG 2014
Order options
RUGGEDCOM WIN7000
RUGGEDCOM WIN7200
Frequency
01
2496 MHz to 2690 MHz
02
3400 MHz to 3600 MHz
03
2300 MHz to 2400 MHz
04
1800 MHz to 1830 MHz
05
1400 MHz to 1525 MHz
06
1350 MHz to 1400 MHz
07
1785 MHz to 1805 MHz
Frequency
01
2483 MHz to 2690 MHz
02
3400 MHz to 3600 MHz
03
3600 MHz to 3800 MHz
04
4900 MHz to 5000 MHz
05
5725 MHz to 5850 MHz
Interfaces
08
SFA: single mode fiber optic interface – AC power option
09
SFD: single mode fiber optic interface – DC power option(1)
10
PEC: Power over Ethernet copper interface
Antennas(2)
11
Sector antenna, 1350 – 1500 MHz,12 dBi, 90°, X-Pol
Omni antenna, 1350 – 1500 MHz, 5 dBi, 360°, N-Female
12
– order 2 per base station
13
Sector antenna BST, 3.3 – 3.8GHz, 17 dBi, 90°, X-Pol
14
Sector antenna, 3.3 – 3.8 GHz, 17 dBi, 65°, X-Pol
Omni antenna, 3.4 – 3.7 GHz, 8.5 dBi 360°, N-Male
15
– order 2 per base station
Omni antenna, 1.7 – 1.9 GHz, 10 dBi, N-female
16
– order 2 per base station
17
High gain sector, 1.71 – 1.88 GHz, 17.5 dBi, 90°, X -Pol
18
Sector antenna, 2300 – 2700 MHz, 16 dBi, 90°, X-Pol
Omni antenna, 2.3 – 2.7 GHz, 9 dBi, 360°, N-Female
19
– order 2 per base station
20
Sector antenna, 2.3 – 2.7 GHz, 16 dBi, 65°, X-Pol
21
ANT, 1390 – 1525 MHz, sector 16.0dBi
Cables(2)
Fiber optic Ethernet 3 m cable, SM, 1310 nm,
22
sealed LC duplex connectors to LC duplex
Fiber optic Ethernet 30 m cable, SM, 1310 nm,
23
sealed LC duplex connectors To LC duplex
Fiber optic Ethernet 50 m cable, SM, 1310 nm,
24
sealed LC duplex connectors To LC duplex
Fiber optic Ethernet 100 m cable, SM, 1310 nm,
25
sealed LC duplex connectors To LC duplex
Fiber optic Ethernet 150 m cable, SM, 1310nm,
26
sealed LC duplex connectors to LC duplex
Fiber optic Ethernet 200 m cable, SM, 1310 nm,
27
sealed LC duplex connectors To LC duplex
28
Cable PWR 30 m for SFA model
29
Cable PWR 60 m for SFA model
30
Cable PWR 80 m for SFA model
31
Cable combo PWR+Ethernet 2xDC+7xData 2 m,
32
Cable combo PWR+Ethernet 2xDC+7xData 30 m
33
Cable combo PWR+Ethernet 2xDC+7xData 80 m
34
Cable combo PWR+Ethernet 2xDC+7xData 60 m
Mounting kit(3)
19-In rack mount kit for RUGGEDCOM WIN7000 base station,
35
1 for 2 BST
(1) No power supply included – assumed 48 VDC power provided by customer
(2) Cables and antennas are recommended but need to be ordered separately.
(3) Rack mounting kit is optional.
14
Order options
Antennas
06
07
Sector antenna, BST 3.3 – 3.8 GHz, 17 dBi, 90°, X-Pol
Sector antenna, 3.3 – 3.8 GHz, 17 dBi, 65°, X-Pol
Omni antenna, 3.4 – 3.7 GHz, 8.5 dBi, 360°, N-Male
08
– order 2 per base station
Low gain omni antenna, 3.4 – 3.6 GHz, 6 dBi, 360°
09
– order 2 per base station
Low gain omni antenna, 3.6 – 3.8 GHz, 6 dBi, 360°
10
– order 2 per base station
Low gain omni antenna, 2.5 – 2.7 GHz, 5.5 dBi, 360°, N-male
11
– order 2 per base station
12
Sector antenna, 2300 – 2700 MHz, 16 dBi, 90°, X-Pol
13
Sector antenna, 2300 – 2700MHz, 17.5 dBi, 65°, X-Pol
Omni antenna, 2.3 – 2.7GHz, 9 dBi, 360°, N-Female
14
– order 2 per base station
15
Sector antenna BST, 4.9 – 5.95 GHz, 16 dBi, 90°, X-Pol
Cables
16
Outdoor Cat5 cable (ETH+48 VDC) – 2 m
17
Outdoor Cat5 cable (ETH+48 VDC) – 15 m
18
Outdoor Cat5 cable (ETH+48 VDC) – 30 m
19
Outdoor Cat5 cable (ETH+48 VDC) – 45 m
20
Outdoor Cat5 cable (ETH+48 VDC) – 60 m
21
Outdoor Cat5 cable (ETH+48 VDC) – 75 m
22
Outdoor Cat5 cable (ETH+48 VDC) – 90 m
Power supplies
23
Comes with AC/DC PoE injector
24
Optional RUGGEDCOM RP100/RP110
© Siemens AG 2014
RUGGEDCOM WIN5100
RUGGEDCOM WIN5200
Frequency
01
1350 MHz to 1525 MHz
02
1785 MHz to 1805 MHz
03
1800 MHz to 1830 MHz
04
2300 MHz to 2400 MHz
05
2496 MHz to 2690 MHz
06
3300 MHz to 3600 MHz
07
3600 MHz to 3800 MHz
08
4900 MHz to 5000 MHz
09
5725 MHz to 5850 MHz
Power options
Direct 10 – 30 VDC input with separate Ethernet connector,
DC
equipped with DC power cable, data cable ordered separately
Standard commercial grade AC power injector – power/data
AC
cable ordered separately
Frequency
01
1350 MHz to 1525 MHz
02
1785 MHz to 1805 MHz
03
1800 MHz to 1830 MHz
04
2300 MHz to 2400 MHz
05
2496 MHz to 2690 MHz
06
3300 MHz to 3600 MHz
07
3600 MHz to 3800 MHz
08
4900 MHz to 5000 MHz
09
5725 MHz to 5850 MHz
Cables
10
Outdoor Cat5 cable (ETH+48 VDC) – 2 m
11
Outdoor Cat5 cable (ETH+48 VDC) – 15 m
12
Outdoor Cat5 cable (ETH+48 VDC) – 30 m
13
Outdoor Cat5 cable (ETH+48 VDC) – 45 m
14
Outdoor Cat5 cable (ETH+48 VDC) – 60 m
15
Outdoor Cat5 cable (ETH+48 VDC) – 75 m
16
Outdoor Cat5 cable (ETH+48 VDC) – 90 m
Power supplies
Comes with RUGGEDCOM WIN1010 power supply Indoor
17
AC/DC PS 48 V with PoE
18
Optional RUGGEDCOM RP100/RP110
Antennas
10
Low gain omni antenna, 3.4 – 3.6 GHz, 6 dBi, 360°
11
Low gain omni antenna, 3.6 – 3.8 GHz, 6 dBi, 360°
12
Low gain omni antenna, 2.5 – 2.7 GHz, 5.5 dBi, 360°, N-male
13
ANT Dual Slant Plate, 2.3 – 2.7 GHz, 18 dBi – KIT
14
ANT Flat CPE, 3.3 – 3.8 GHz, 18 dBi, 18°, N-Type
15
Vehicular antenna, 0.68 – 6.0 GHz, 6 dBi
16
ANT dual slant, 1.78 – 1.85 GHz, 13 dBi, N-Type – KIT
17
ANT dual slant antenna, 4.9 – 6.1 GHz, 22.5 dBi, N-TYPE
18
ANT omni, 806 – 5935 MHz, 9.5 dBi, N-Female
19
ANT dual slant, 1.3 – 1.525 GHz, 10 dBi
Data/PoE cables
20
Outdoor Cat5 cable (ETH+48 VDC) – 2 m
21
Outdoor Cat5 cable (ETH+48 VDC) – 15 m
22
Outdoor Cat5 cable (ETH+48 VDC) – 30 m
23
Outdoor Cat5 cable (ETH+48 VDC) – 45 m
24
Outdoor Cat5 cable (ETH+48 VDC) – 60 m
25
Outdoor Cat5 cable (ETH+48 VDC) – 75 m
26
Outdoor Cat5 cable (ETH+48 VDC) – 90 m
Power supplies
Comes with RUGGEDCOM WIN1010 power supply Indoor
27
AC/DC PS 48 V with PoE
28
Optional RUGGEDCOM RP100/RP110
RUGGEDCOM RP100
Power supply
01
88-300 VDC or 85-264 VAC
02
10-60 VDC
Power delivery
03
Standard compliant to 803.2at
RUGGEDCOM WIN compliant – use for RUGGEDCOM WIN5xxx
04
and RUGGEDCOM WIN72xx
Manufacturing modification
05
Standard
06
Conformal coating
RUGGEDCOM RP110
Power supply
01
88-300 VDC or 85-264 VAC
02
10-60 VDC
Power delivery
03
RUGGEDCOM WIN compliant – use for RUGGEDCOM WIN5xxx
Manufacturing modification
04
Standard
05
Conformal coating
For more information on wireless approvals, visit:
http://www.siemens.com/wireless-approvals
Order options
15
© Siemens AG 2014
Security information
Siemens provides products and solutions with
industrial security functions that support the
secure operation of plants, solutions, machines,
equipment and/or networks. They are important
components in a holistic industrial security
concept. With this in mind, Siemens’ products
and solutions undergo continuous development.
Siemens recommends strongly that you regularly
check for product updates.
For the secure operation of Siemens products and
solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-theart industrial security concept. Third-party products
that may be in use should also be considered. For
more information about industrial security, visit
http://www.siemens.com/industrialsecurity.
To stay informed about product updates as they
occur, sign up for a product-specific newsletter.
For more information, visit
http://support.automation.siemens.com.
Siemens AG
Process Industries and Drives
Process Automation
Postfach 48 48
90026 NÜRNBERG
GERMANY
Siemens Canada Limited
300 Applewood Crescent
Concord, Ontario, L4K 5C7
CANADA
www.siemens.com/ruggedcom
Subject to change without prior notice
Article No. 6ZB5531-0AH02-0BA0
DR.PN.RG.15.XXBR.95.07 / Dispo 26000
BR 1014 2. ROT 16 En
Printed in Germany
© Siemens AG 2014
The information provided in this brochure contains descriptions or
characteristics of performance which in case of actual use do not
always apply as described or which may change as a result of
further development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed in
the terms of contract. Availability and technical specifications are
subject to change without notice.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third parties
for their own purposes could violate the rights of the owners.