ENCLOSURE SYSTEMS
INDIA 2013-2014
In line with our policy of continuous development, we reserve the right to update our designs at any time.
As a result, the product shown may not be identical to the one which is supplied, although it will
correspond with the standards mentioned in the brochure. Whilst every care is taken to ensure that the
information supplied is correct, we cannot accept any responsibility for errors or changes that may occur.
© Eldon Holding AB
ENCLOSURE SYSTEMS
INDIA 2013-2014
Corporate Presentation
6
Wall Mounted Enclosures
10
Terminal Boxes
26
Floor Standing Enclosures
29
Human-Machine Interface
57
Thermal Management
66
ELDON CS
Contents
Wall Mounted Enclosures
Mild steel, single door enclosure
10
MAS
12
Mild steel, double door enclosure
MAD
16
Stainless steel, single door enclosure
ASR
20
Stainless steel, double door enclosure
ADR
23
AW
25
ACCESSORIES
Wall mounting brackets
Depth adjust kit
AMG
25
Door stop
ADO
25
Locks
ALL
25
Document pocket
DRA
25
Terminal Boxes
Steel terminal box
26
STB
27
ACCESSORIES
Bottom profile
BPP
28
Hinges
STBH
28
Mounting plate
BMP
28
Wall mounting brackets
AW
28
Floor Standing Enclosures
29
Mild steel combinable version, single door enclosure
MCS
34
Mild steel combinable version, double door enclosure
MCD
37
Stainless Steel combinable version, single door enclosure.
MCSS
42
Stainless steel combinable version, double door enclosure.
MCDS
44
ACCESSORIES
4
Side panels
SPM
46
Side panels Stainless steel
SPMS
46
Front/rear Plinths
PF
47
Side Plinths
PS
47
Front/Rear plinth, stainless steel
PFS
48
Side Plinths
PSS
48
Plain door
D
49
Glazed door
DGC
50
Door hinges 180°
DHN
50
Door mounting kit
DMK
50
Document pocket
DRA
51
Door stop
DSTP
51
Door switch
DSW
51
Visit our website at www.eldon.com
ELDON CS
Mounting plates
MP
51
Filler plates
MPF
52
Mounting brackets front fixing
MPA
52
Mounting plate adjustment brackets
MPD
52
Click-in profile
CLPK
52
Cage nuts
CNM
53
Extrude-tite screws
CNT
53
Mounting profile
CLPF
53
Screws for clip-on cage nuts
CNS
54
External baying brackets
CCE
54
Internal baying brackets
CCI
54
Internal corner baying kit
CCM
54
Lifting device
LC
55
Lifting eye bolts
LE MultiFlex
55
Swing handle lock cover
LSC
55
Profile half cylinder locks
LSSI
55
Enclosure light
LTL
56
Female connectors
COF
56
Human- Machine Interface
57
One-piece consoles in mild steel
MPG
58
Console system
MPC
60
Mild steel industrial computer enclosure
MCM
64
Thermal Management
High flow Filter fan
66
EF
67
EFA
68
ACCESSORIES
Exhaust filter
Thermostat
ETR200
68
Hygrostat
ETF
68
Product specifications, CAD drawings and information available on the website
5
Eldon:
Global Strength, Personal Touch
At Eldon, we have one Mission: to be a company that is easy-to-do-business-with. Every
decision we take, from the boardroom through the back-office to the factory floor, is focused
to achieve this objective. With ninety years of experience, sales offices and distribution
partners on five continents and manufacturing facilities located throughout the world,
we offer our customer the advantages of a firm with a significant global footprint.
Eldon offers one of the most comprehensive ranges of electrical enclosures and accessories
for Automation and Control applications, Heating Ventilation and Air-conditioning (HVAC) and
Power and Distribution systems.
With our technical information available online, certifications, our robust software tools and
our highly-trained back office personnel you will experience a company easy to do business
with. Our enclosures are engineered to be cabled with ease and fitted with a broad range of
accessories thus providing our customers with one of the easiest and quickest enclosures to
assemble. Not only valid for our products, Eldon strives towards being easy-to-do-business
with in every aspect of our customer relationship; from the moment you contact us through
to the delivery of your requirements and including an excellent after-sale service.
Eldon. Enclosure solutions for you.
Need for customized enclosures?
Eldon is your partner!
At Eldon we take great pride in our broad range of standard enclosures but some jobs demand a specific enclosure solution. Our ninety years experience in the enclosure business
ensures we have the kind of in depth knowledge necessary to modify our standard products,
with custom hole patterns, color changes, dimension and accessories assembly, while our
state-of-the-art manufacturing facilities and engineering competence also enables us to
design enclosures from scratch to meet very specific customer requirements. This means
we can manufacture enclosures with an array of special dimensions, increased corrosion
resistance, custom colors, various cut-outs and transparent windows as well as inserted
nuts, ventilation louvers, welded studs and mounted accessories.
However, it is not just Eldon’s capability to modify standard enclosures or our new production facilities that set us apart when it comes to custom enclosures. Because Eldon works
seamlessly with our customers from concept to design, with drawings all the way through
to production of the new enclosure, together we create the best enclosure solution to
meet your needs.
Our versatile engineering software in concert with a strategy of developing prototypes early
in the production process ensures Eldon’s ability to create custom enclosures quickly and
with short lead times. Additionally, by providing our customers with the option to hold stock
for repeatedly requested custom products, reordering is fast and effortless.
Quality at Eldon
The meaning of the word “quality” at Eldon does not stop with bringing a quality product to
market. At Eldon, “quality” stands for much more. From our strategic goals to our state-of-the
art (ISO9001 accredited) manufacturing facilities to the selection of our distributor partners,
“quality” represents a hallmark for the type of company we are today and the way we will
continue to define ourselves in the future. Eldon’s commitment to quality permeates the entire
structure, from our CEO through all the functional departments, of our company.
We believe that continually striving to improve is not merely about our passion to deliver quality
products; it is about living by a code that defines our interactions with our customers on every
level. “Quality” at Eldon is about more than deploying the latest and most powerful software
tools to make our customers ordering experience simple, straightforward and convenient. It is
about communicating with our customers and using their feedback to bring quality products to
market that are both robust and exceptionally easy to use. It is about delivering our products
promptly and giving support, both during and after the sale, with the best possible customer
service. At the core, Eldon “quality” is about adding value to our products, to our service and
ultimately to our customers.
Nationaal Lucht- en Ruimtevaartlaboratorium
National Aerospace Laboratory NLR
NLR-CR-2009-375
Shielding effectiveness (SE) of ELDON enclosures
According to VG-95373-15
A.A.G. Sogtoen
No part of this report may be reproduced and/or disclosed, in any form or by any means without the prior
written permission of the owner.
Customer
ELDON
Contract number
Owner
Division NLR
ELDON
Aerospace Systems & Applications
Distribution
Limited
Classification of title
Unclassified
Approved by:
Author
Reviewer
Managing department
WALL MOUNTED
ENCLOSURES
10
Wall Mounted Enclosures
ELDON CS
MultiMount® mild steel
wall mounted enclosures
‹‹ Typical applications:
heating, ventilation,
air conditioning OEM’s,
small control systems,
distribution solutions.
‹‹ One-piece body for optimum
rigidity and maximum IP.
‹‹ Multi-purpose:
mounting plate,
19 inch profiles,
swing frame,
modular system.
‹‹ Easy-to-work-with.
‹‹ Large useful mounting space.
‹‹ Easy equipment positioning.
‹‹ Factory customisation.
‹‹ Approvals and certifications.
Product specifications, CAD drawings and information available on the website
Wall Mounted Enclosures
11
ELDON CS
Wall Mounted Enclosures
MAS
Mild steel, single door enclosure
IP 66/NEMA 4, 12, 13 IK 10
The MultiMount range of mild steel IP 66 wall mounted enclosures has been designed with the user in mind.
Practical, efficient and with a wide range of standard sizes and accessories available from stock, the
MultiMount range offers a solution to virtually every application, or can be easily customised to suit specific
requirements.
Technical Data
Material: Body: 1.2mm mild steel /
1.4mm MAS0606021R5 and above /
1.5mm MAS1001230R5 and above, and
400mm depth enclosures. Gland plate:
1.4mm mild steel. Door: 1.2mm mild
steel / 1.4mm MAS0606021R5 and above
/ 1.8mm MAS1006026R5 and above.
Mounting plate: 2mm galvanized steel.
Body: Folded and seam welded. Four
8.5mm diameter holes for wall fixing,
pressed out in 20.4mm diameter x 2mm
depressions to allow air circulation
around the rear part of the enclosure.
Door: Surface mounted with 130° opening.
Concealed removable hinges with captive
pin. Hinges can be mounted to allow left or
right hand opening. From height 300mm
and above there are studs to mount
door profiles MMDP, and from height
600 and above the profiles are included
as standard. Sealing is ensured by an
injected one piece polyurethane gasket.
12
Wall Mounted Enclosures
Lock: Customised lock with double grip
for easy opening of the door. Double‑bit
3mm insert and 90° movement. 1000mm
high enclosures and above have
espagnolette three point locking. Other
inserts are available as an accessory.
Mounting plate: The mounting plate is
marked vertically at 10mm intervals for
easy horizontal positioning of equipment.
On the top and bottom there are holes to
facilitate cable fixing. Fixed onto M8 press
welded studs to the rear of the enclosure.
All sides from 800mm and above are
strengthened by folded edges. By using
the AMG accessory the mounting plate
position can be adjusted to any depth.
Protection: Complies with IP 66,
and NEMA 4, 12 and 13. For outdoor
installation the use of rain hood ARF is
recommended, and the corrosion resistance
must be taken into consideration.
Finish: RAL 7035 structure
powder coating.
Delivery: Enclosure with door, and
two door mounting profiles from
size MAS0604015R5 and above.
Gland plate(s) with gasket(s), plastic
double-bit 3mm key, and mounting
accessories. Earthing facilities.
Gland Plate Opening: Situated at the
far rear of the enclosure to make cabling
onto the mounting plate easier.
Visit our website at www.eldon.com
Wall Mounted Enclosures
ELDON CS
With mounting plate
Enclosure dimension
H
200
250
300
W
D
200
200
250
250
155
155
155
155
210
155
210
155
155
210
210
210
210
210
155
210
260
300
210
300
155
210
260
300
155
210
260
300
210
300
400
300
210
260
300
210
260
300
400
210
300
400
260
300
260
300
400
300
300
400
300
350
400
500
250
300
400
500
600
300
400
500
600
400
500
600
700
800
800
500
400
600
800
1000
600
800
1200
600
800
Mounting plate dimension
h
170
220
220
270
270
270
270
320
370
370
370
370
370
470
470
470
470
470
470
470
570
570
570
570
570
570
570
570
570
570
570
570
670
670
770
770
770
770
770
770
770
770
970
970
970
970
970
1170
1170
1170
w
d
150
150
200
200
200
250
250
200
250
250
350
450
550
250
350
350
350
350
450
450
350
350
350
350
450
450
450
450
550
550
550
750
450
450
350
550
550
550
550
750
750
750
550
550
750
750
750
550
750
750
137
137
137
137
192
137
192
137
137
192
192
192
192
192
137
192
242
282
192
282
137
192
242
282
137
192
242
282
192
282
382
282
192
242
282
192
242
282
382
192
282
382
242
282
242
282
382
282
282
382
Gland plate openings
Size
110x56
110x56
110x56
110x56
110x56
210x56
210x96
110x56
210x56
210x96
310x96
410x96
510x96
210x96
310x56
310x96
310x96
310x96
410x96
410x96
310x56
310x96
310x96
310x96
410x56
410x96
410x96
410x96
510x96
510x96
510x96
310x96
410x96
410x96
310x96
510x96
510x96
510x96
510x96
310x96
310x96
310x96
510x96
510x96
310x96
310x96
310x96
510x96
310x96
310x96
Type
0S
0S
0S
0S
0S
1S
1
0S
1S
1
2
3
4
1
2S
2
2
2
3
3
2S
2
2
2
3S
3
3
3
4
4
4
2
3
3
2
4
4
4
4
2
2
2
4
4
2
2
2
4
2
2
Openings
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
2
2
1
1
2
2
2
1
2
2
N° of
locks
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1*
1*
1*
1*
1*
1*
1*
1*
Part No.
MAS0202015R5
MAS0252015R5
MAS0252515R5
MAS0302515R5
MAS0302521R5
MAS0303015R5
MAS0303021R5
MAS0352515R5
MAS0403015R5
MAS0403021R5
MAS0404021R5
MAS0405021R5
MAS0406021R5
MAS0503021R5
MAS0504015R5
MAS0504021R5
MAS0504026R5
MAS0504030R5
MAS0505021R5
MAS0505030R5
MAS0604015R5
MAS0604021R5
MAS0604026R5
MAS0604030R5
MAS0605015R5
MAS0605021R5
MAS0605026R5
MAS0605030R5
MAS0606021R5
MAS0606030R5
MAS0606040R5
MAS0608030R5
MAS0705021R5
MAS0705026R5
MAS0804030R5
MAS0806021R5
MAS0806026R5
MAS0806030R5
MAS0806040R5
MAS0808021R5
MAS0808030R5
MAS0808040R5
MAS1006026R5
MAS1006030R5
MAS1008026R5
MAS1008030R5
MAS1008040R5
MAS1206030R5
MAS1208030R5
MAS1208040R5
* 3 point espagnolette locking.
Product specifications, CAD drawings and information available on the website
Wall Mounted Enclosures
13
Wall Mounted Enclosures
ELDON CS
Without mounting plate
Enclosure dimension
H
200
250
300
D
Size
200
200
250
250
155
155
155
155
210
155
210
155
155
210
210
210
210
210
155
210
260
300
210
300
155
210
260
300
155
210
260
300
210
300
400
300
210
260
300
210
260
300
400
210
300
400
260
300
260
300
400
300
300
400
110x56
110x56
110x56
110x56
110x56
210x56
210x96
110x56
210x56
210x96
310x96
410x96
510x96
210x96
310x56
310x96
310x96
310x96
410x96
410x96
310x56
310x96
310x96
310x96
410x56
410x96
410x96
410x96
510x96
510x96
510x96
310x96
410x96
410x96
310x96
510x96
510x96
510x96
510x96
310x96
310x96
310x96
510x96
510x96
310x96
310x96
310x96
510x96
310x96
310x96
300
350
400
500
250
300
400
500
600
300
400
500
600
400
500
600
700
800
800
500
400
600
800
1000
600
800
1200
Gland plate openings
W
600
800
Type
0S
0S
0S
0S
0S
1S
1
0S
1S
1
2
3
4
1
2S
2
2
2
3
3
2S
2
2
2
3S
3
3
3
4
4
4
2
3
3
2
4
4
4
4
2
2
2
4
4
2
2
2
4
2
2
Openings
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
2
2
1
1
2
2
2
1
2
2
N° of locks
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1*
1*
1*
1*
1*
1*
1*
1*
Part No.
MAS0202015PER5
MAS0252015PER5
MAS0252515PER5
MAS0302515PER5
MAS0302521PER5
MAS0303015PER5
MAS0303021PER5
MAS0352515PER5
MAS0403015PER5
MAS0403021PER5
MAS0404021PER5
MAS0405021PER5
MAS0406021PER5
MAS0503021PER5
MAS0504015PER5
MAS0504021PER5
MAS0504026PER5
MAS0504030PER5
MAS0505021PER5
MAS0505030PER5
MAS0604015PER5
MAS0604021PER5
MAS0604026PER5
MAS0604030PER5
MAS0605015PER5
MAS0605021PER5
MAS0605026PER5
MAS0605030PER5
MAS0606021PER5
MAS0606030PER5
MAS0606040PER5
MAS0608030PER5
MAS0705021PER5
MAS0705026PER5
MAS0804030PER5
MAS0806021PER5
MAS0806026PER5
MAS0806030PER5
MAS0806040PER5
MAS0808021PER5
MAS0808030PER5
MAS0808040PER5
MAS1006026PER5
MAS1006030PER5
MAS1008026PER5
MAS1008030PER5
MAS1008040PER5
MAS1206030PER5
MAS1208030PER5
MAS1208040PER5
* 3 point espagnolette locking.
14
Wall Mounted Enclosures
Visit our website at www.eldon.com
Wall Mounted Enclosures
ELDON CS
Dimensions
Product specifications, CAD drawings and information available on the website
Wall Mounted Enclosures
15
ELDON CS
Wall Mounted Enclosures
MAD
Mild steel, double door enclosure
IP 55 / NEMA 12,13 IK 10
The MultiMount range of mild steel wall mounted enclosures is also available in double door versions, and
complies with IP 55. There are 5 sizes available and a range of accessories. The standard finish is RAL 7035,
although other colours and sizes are available on request.
Technical Data
Material: Body: 1.4mm mild steel
MAD0608030R5 / 1.5mm MAD0801230R5
and above. Gland plate: 1.4mm mild
steel. Doors: 1.4mm mild steel / 1.8mm
MAD0801230R5 and above. Mounting
plate: 2mm galvanized steel / 2.5mm
MAD1001030R5 and above.
Body: Folded and seam welded. Four
8.5mm diameter holes for wall fixing,
pressed out in 20.4mm diameter x
2mm depressions to allow air circulation
around the rear part of the enclosure.
Door: Surface mounted with 130° opening.
Concealed removable hinges with captive
pin. Two removable mounting profiles in the
right hand door. Sealing is ensured by an
extruded one piece polyurethane gasket.
16
Wall Mounted Enclosures
Lock: Customised lock with double grip
for easy opening of the door, double‑bit
3mm insert and 90° movement.
Espagnolette three point locking. Other
inserts are available as an accessory.
Mounting plate: The mounting plate is
marked vertically at 10mm intervals for
easy horizontal positioning of equipment.
On the top and bottom there are holes to
facilitate cable fixing. Fixed onto M8 press
welded studs to the rear of the enclosure.
All sides from 800mm and above are
strengthened by folded edges. By using
the AMG accessory the mounting plate
position can be adjusted to any depth.
Gland Plate Opening: Situated at
the far rear of the enclosure to make
cabling onto the mounting plate easier.
Protection: Complies with IP 55, and
NEMA 12, 13. For outdoor installation the
use of rain hood ARF is recommended,
and the corrosion resistance must
be taken in consideration.
Finish: RAL 7035 structure
powder coating.
Delivery: Enclosure with doors, and
two door mounting profiles on the right
door. Gland plate(s) with gasket(s),
plastic DIN 3mm key, and mounting
accessories. Earthing facilities.
Visit our website at www.eldon.com
Wall Mounted Enclosures
ELDON CS
With mounting plate
Enclosure dimension
H
600
800
1000
1200
1400
W
D
800
1200
1000
1000
1000
300
300
300
300
300
Mounting plate dimension
h
570
770
970
1170
1370
w
750
1150
950
950
950
Gland plate openings
d
Size
282
282
282
282
282
510X96
410x96
410x96
410x96
Type
N° of
locks
Openings
2
4
3
3
3
2
2
2
2
2
1*
1*
1*
1*
1*
Part No.
MAD0608030R5
MAD0801230R5
MAD1001030R5
MAD1201030R5
MAD1401030R5
Without mounting plate
Enclosure dimension
H
600
800
1000
1200
1400
W
D
800
1200
1000
1000
1000
300
300
300
300
300
Gland plate openings
Size
310X96
510x96
410x96
410x96
410x96
Type
2
4
3
3
3
Openings
2
2
2
2
2
N° of locks
1*
1*
1*
1*
1*
Part No.
MAD0608030PER5
MAD0801230PER5
MAD1001030PER5
MAD1201030PER5
MAD1401030PER5
* 3 point espagnolette locking.
Dimensions
Product specifications, CAD drawings and information available on the website
Wall Mounted Enclosures
17
Eldon MultiMount
stainless steel
wall mounting enclosures
®
Technical Information
Sturdy cruciform body folded from cold pressed
1/1.5mm pre-grained AISI 304 / AISI 316L
stainless steel. The enclosure edge is folded in
the shape of a channel to avoid water stagnating
on the seal.
The door is made out 1.5/2mm pre-grained AISI
304 / AISI 316L stainless steel with M6 studs
allowing mounting of MMDP profiles (accessory)
for easy installation of cable tracks, profiles, etc.
Body and door are provided with M8 threaded
studs for earthing connection.
The enclosure has external a pre-grained finish,
which gives the product an aesthetically and
highly professional appearance.
Finish of the outer door and body 240s pre
grained (average 0.5 microns), which makes it
highly suitable for the food industries (HACCP).
18
The enclosure consists of two parts: the base
and the door. The door is secured by means of
two or three stainless steel hinges and its angle
of opening is at least 130°. The hinges are not
visible in closed position and are fitted with a
captive hinge pin. The opening direction of the
door is left-right and is reversible.
The single doors are closed by one, two or three
point locking system, the double doors by means
of three point espagnolette system. The door also
has a seamless polyurethane gasket.
The chrome plated Eldon customized 3mm
double-bit lock with 90-degree movement can
be interchanged with other inserts.
The door opens within the outer dimensions of
the enclosure body allowing enclosures to be
mounted directly next to each other without the
door interference.
The mounting plate can be set up and wired
outside the enclosure. It is placed subsequently
in the enclosure:
• either against the rear wall of the enclosure
• or using a mounting kit, which is adjustable
in depth.
Furthermore the mounting plate is equipped with
side markings every 10mm for easy mounting
of the equipment on the mounting plate and
holes in top and bottom have been applied for
cable fixing.
To comply with EMC guidelines, the mounting
plate is manufactured from Sendzimir zinc-plated
steel plate 2-2.5mm thick. This plate provides
an equipotential mass connection between all
devices in the enclosure.
The enclosure offers maximum protection to
the user and equipment by a protection degree
IP 66 - IK 10 as per lEC 60529 and NBN G20- 001
(IP 55 - IK 10 for enclosures with double door
and enclosures with glazed door). When using an
interior door or modular framework or 19” swing
frame, protection degree IP 20 is guaranteed
within the enclosure. Complying with NEMA
4x, 12 and 13.
Possibility for integrated sloping and overhanging
roof is one of the standard options especially
designed for harsh environments.
The enclosures have the UL approval, as per
UL standard 508 and also comply with the CSA
certification mark, as per C22.2 no. 94.
Wall Mounted Enclosures
ELDON CS
MultiMount® stainless steel
wall mounting enclosures
‹‹ The enclosure edge is folded in
the shape of a channel to avoid
water stagnation on the seal.
‹‹ Finely pre-grained surface
finish (240s).
‹‹ Threaded studs to assist with
equipment mounting.
‹‹ Polyurethane one piece gasket
provides a continuous seal
that maximizes the IP rating.
‹‹ Concealed hinges providing
130 degree opening and
cleanliness of design.
‹‹ Multi-purpose:
mounting plate,
19 inch profiles,
swing frame.
‹‹ Sturdy monoblock body.
‹‹ Approvals and certifications.
Product specifications, CAD drawings and information available on the website
Wall Mounted Enclosures
19
ELDON CS
Wall Mounted Enclosures
ASR
Stainless steel, single door enclosure
IP 66/NEMA 4X,12,13, IK10
The Eldon ASR range, designed with cleanliness and ingress protection in mind, provides high resistance to
corrosion and ensures performance of equipment.
Intended for harsh environments, the ASR range is the ideal solution for food and chemical industries,
pharmaceutical plants, outdoor applications and marine environments.
Technical Data
Material: AISI 304 / AISI 316L
pre-grained stainless steel;
Body: 1.0mm/ 1.5mm ASR0406021
and larger; Door: 1.5mm/ 2mm
ASR1008030 and larger;
Mounting plate: 2.0mm galvanized steel.
Frame: Monoblock body, folded and
seam welded.
Door: Corner formed in one piece. Surface
mounted with 130° opening. Concealed
AISI 304 stainless steel hinges with
removable pin. Can be mounted to give left
or right hand opening. Sealing is ensured
by an injected one piece polyurethane
gasket. Inside of door fitted with four
welded studs for equipment profiles.
20
Wall Mounted Enclosures
Lock: Eldon customized chrome
plated double-bit 3mm lock with 90°
movement and anti-vibration mechanism.
1000mm high enclosures and above
have espagnolette three point locking.
Stainless steel lock and other versions
are available as accessories.
Mounting plate: Fixed onto M8 studs
welded to the rear of the enclosure.
In enclosures with height or width of
800mm or more, the mounting plate has
a fold to all four sides for extra rigidity. By
using the AMG accessory the mounting
plate can be adjusted in depth.
Protection: Corresponds with IP 66
and NEMA 4X, 12 and 13, IK 10.
Finish: 240s pre grained stainless
steel (average 0.5 micron).
Delivery: Mounting plate, complete
with fitting accessories and earthing
facilities. Packaged in a reusable carton.
Additional information: The use of
Thermal Management Equipment, venting
and rainhoods is advised for harsh and
outdoor applications. Please see our
general accessories section and Technical
chapter for additional information.
Cable access: No gland plate
openings as standard to maximise
sealing and clean lines.
Visit our website at www.eldon.com
Wall Mounted Enclosures
ELDON CS
With mounting plate
Enclosure dimension
H
W
D
180
240
240
240
150
150
150
150
150
150
150
150
150
150
150
150
210
210
210
210
210
210
210
210
210
210
210
210
300
300
300
300
210
210
300
300
300
300
300
300
300
300
400
400
400
400
360
300
200
360
240
400
300
400
600
500
400
500
600
400
600
800
800
600
800
1000
800
1200
800
1400
800
Mounting plate dimension
h
150
150
210
210
210
210
270
270
330
330
370
370
370
370
370
370
470
470
470
470
570
570
570
570
570
570
570
570
770
770
770
770
770
770
970
970
1170
1170
1170
1170
1370
1370
w
Weight
(kg)
190
190
190
190
310
310
150
150
190
190
250
250
350
350
550
550
350
350
450
450
350
350
550
550
550
550
750
750
550
550
550
550
750
750
750
750
750
750
750
750
750
750
2.5
2.5
3.2
3.2
5.0
5.0
4.5
4.5
5.0
5.0
8.3
8.3
11.2
11.2
15.8
15.8
16.0
16.0
17.0
17.0
15.8
15.8
22.2
22.2
25.2
25.2
32.4
32.4
28.6
28.6
32.3
32.3
42.0
42.0
51.5
51.5
59.5
59.5
62.3
62.3
78.1
78.1
N° of locks
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1*
1*
1*
1*
1*
1*
1*
1*
Usable
depth
130
130
130
130
130
130
130
130
130
130
130
130
190
190
190
190
190
190
190
190
190
190
190
190
280
280
280
280
190
190
280
280
280
280
280
280
280
280
380
380
380
380
Part No.
ASR0182415
ASR0182415-316
ASR0242415
ASR0242415-316
ASR0243615
ASR0243615-316
ASR0302015
ASR0302015-316
ASR0362415
ASR0362415-316
ASR0403015
ASR0403015-316
ASR0404021
ASR0404021-316
ASR0406021
ASR0406021-316
ASR0504021
ASR0504021-316
ASR0505021
ASR0505021-316
ASR0604021
ASR0604021-316
ASR0606021
ASR0606021-316
ASR0606030
ASR0606030-316
ASR0608030
ASR0608030-316
ASR0806021
ASR0806021-316
ASR0806030
ASR0806030-316
ASR0808030
ASR0808030-316
ASR1008030
ASR1008030-316
ASR1208030
ASR1208030-316
ASR1208040
ASR1208040-316
ASR1408040
ASR1408040-316
* 3 point espagnolette locking.
Product specifications, CAD drawings and information available on the website
Wall Mounted Enclosures
21
ELDON CS
Wall Mounted Enclosures
Dimensions
22
Wall Mounted Enclosures
Visit our website at www.eldon.com
Wall Mounted Enclosures
ELDON CS
ADR
Stainless steel, double door enclosure
IP 55/NEMA 12, 13, IK10
The Eldon ADR range, designed with cleanliness and ingress protection in mind, provides high resistance to
corrosion and ensures performance of equipment.
Intended for harsh environments, the ADR range is the ideal solution for food and chemical industries,
pharmaceutical plants, outdoor applications and marine environments.
Technical Data
Material: AISI 304 / AISI 316L pre-grained
stainless, Body: 1.5mm, Door: 2,0mm,
Mounting plate: 2.5mm galvanized steel.
Body: Monoblock body,
folded and seam welded.
Door: Corner formed in one piece. Surface
mounted with 130° opening. Concealed AISI
304 stainless steel hinges with removable
pin. Inside of door carries four welded studs
for equipment profiles. Sealing is ensured by
an injected one piece polyurethane gasket.
Lock: Eldon customized chrome plated
double-bit 3mm lock with 90° movement
and anti-vibration mechanism. Espagnolette
three points locking. Stainless steel lock and
other versions are available as accessories.
Mounting plate: Fixed onto M8 studs
welded to the rear of the enclosure.
In enclosures with height or width of
800mm or more, the mounting plate has
a fold to all four sides for extra rigidity. By
using the AMG accessory the mounting
plate can be adjusted in depth.
Protection: Corresponds with
IP55 and NEMA 12,13, IK10.
Delivery: Mounting plate, complete
with fitting accessories and earthing
facilities. Packaged in a reusable carton.
Additional information: The use of
Thermal Management Equipment, venting
and rainhoods is advised for harsh and
outdoor applications Please see our
general accessories section and Technical
chapter for additional information.
Finish: 240s pre grained stainless
steel (average 0.5 micron).
Product specifications, CAD drawings and information available on the website
Wall Mounted Enclosures
23
Wall Mounted Accessories
ELDON CS
With mounting plate
Enclosure dimension
H
1000
Mounting plate dimension
W
D
h
1000
1200
1000
1200
300
300
300
300
970
970
970
970
w
950
1150
950
1150
Weight
(kg)
59.5
69.7
59.5
69.7
N° of locks
1*
1*
1*
1*
Usable
depth
280
280
280
280
Part No.
ADR1001030
ADR1001230
ADR1001030-316
ADR1001230-316
* 3 point espagnolette locking.
Dimensions
50
24
Wall Mounted Accessories
Visit our website at www.eldon.com
Wall Mounted Accessories
ELDON CS
AW
ADO
Wall mounting brackets
Door stop
Description: Mounting brackets for safe wall fixing. It
includes the sealing washers to guarantee the IP rating.
Description: Door stop for height 300mm enclosures
and above. To secure the door in an open position
allowing a 90º or 110º opening. Mounted directly to
the door profile studs. Machining is required.
Material: 3mm zinc plated steel.
Pack quantity: 1 piece with mounting accessories.
Pack quantity: 4 brackets with mounting accessories.
Part No.
AW41
Description
Part No.
Zinc plated steel
ADO201
Stainless steel
ADO200S
ALL
AMG
Locks
Depth adjust kit
Description: Alternative locks to replace the standard one.
Pack quantity: 1 piece.
Description: To provide depth adjustment for different
accessories: mounting plate, 19" profiles and inner door.
In stainless steel enclosure machining is required.
Material: 2mm galvanized steel.
Description
Type
Part No.
MultiMount 333 key lock
Key 333
ALL509
DRA
Document pocket
Depth adjustment: Distance to the door D-35 to 65mm.
Pack quantity: 2 pairs with mounting accessories.
Enclosure dimension
D
Part No.
155
AMG155
210
AMG210
260
AMG260
300
AMG300
400
AMG400
Description: Self adhesive, for DIN A4.
Usable depth: 30mm.
Material: Thermoplastic.
Finish: RAL 7035.
Pack quantity: 1 document pocket with double sided tape.
Part No.
DRA04
Product specifications, CAD drawings and information available on the website
Wall Mounted Accessories
25
terminal
boxes
26
Terminal Boxes
ELDON CS
STB
Steel terminal box
H
W
D
Weight (kg)
Part No.
150
150
80
1,24
STB151508
150
150
120
1,46
STB151512
150
300
80
2,23
STB153008
150
300
120
2,56
STB153012
200
200
80
2,00
STB202008
200
200
120
2,30
STB202012
200
300
80
2,82
STB203008
200
300
120
3,19
STB203012
200
400
80
3,67
STB204008
200
400
120
4,09
STB204012
Material: 1.2mm mild steel.
200
500
120
4,98
STB205012
Body: Folded and seam welded. Four 8.5mm diameter holes for
wall fixing. Four M6x13 studs for Bottom Profiles/Mounting plate .
200
600
120
6,02
STB206012
200
800
120
7,86
STB208012
300
300
80
4,09
STB303008
Gasket: Sealing is ensured by an injected
one piece polyurethane gasket.
Earthing: Earthing studs M8x12mm in body and
cover, M8 nuts, earth washers, and earth labels.
Protection: Complies with IP 66, IK 10.
Finish: RAL 7035, structure powder coating.
Approvals: CE, KEMA, cUL, UL, GOST.
Delivery: Base, cover, cover screws, fixing
screws, cover plugs, and earthing facilities.
Dimensions
Front view
300
300
120
4,54
STB303012
300
400
120
5,79
STB304012
300
500
120
7,04
STB305012
300
600
120
8,42
STB306012
400
400
120
7,49
STB404012
400
600
120
10,82
STB406012
400
800
120
14,07
STB408012
Sectional side view
D
W
14.85
A
B
B
74
H
M8x18
A
35
Sectional top view
15
10.8
W-30
SECTION A-A
8.7
SECTION B-B
Product specifications, CAD drawings and information available on the website
Terminal Boxes
27
Terminal Boxes Accessories
ELDON CS
BPP
BMP
Bottom profile
Mounting plate
Description: Bottom profile for DIN rail mounting.
Description: Steel mounting plate for terminal boxes.
Material: Galvanized steel.
Material: 2mm galvanized steel.
Pack quantity: 2 pieces.
Pack quantity: 1 piece.
W
Part No.
150
BPP15
200
BPP20
300
BPP30
400
BPP40
500
BPP50
600
BPP60
800
BPP80
STBH
Enclosure
dimension
Mounting plate
dimension
H
h
W
150
200
300
Hinges
400
w
Part No.
150
125
120
BMP1515
300
125
270
BMP1530
200
170
170
BMP2020
300
170
270
BMP2030
400
170
370
BMP2040
500
170
470
BMP2050
600
170
570
BMP2060
800
170
770
BMP2080
300
275
270
BMP3030
400
275
370
BMP3040
500
275
470
BMP3050
600
275
570
BMP3060
400
380
370
BMP4040
600
380
570
BMP4060
800
380
770
BMP4080
AW
Wall mounting brackets
Description: Using this accessory the cover
can be hinged. Machining is required.
Material: Zinc-plated steel.
Pack quantity: Hinges with mounting accessories. 2 pieces.
Part No.
STBH02
Description: Mounting brackets for safe wall fixing. It
includes the sealing washers to guarantee the IP rating.
Material: 3mm zinc plated steel.
Pack quantity: 4 brackets with mounting accessories.
Part No.
AW41
28
Terminal Boxes Accessories
Visit our website at www.eldon.com
FLOOR STANDING
enclosures
29
ELDON CS
MCS
mild steel, single door
30
Floor Standing Enclosures
MCD
mild steel, double door
IP 56; NEMA 4, 12, 13; IK 10
IP 55; NEMA 12, 13, IK 10
H: 1800-2200
W: 400-1000
D: 400-800
H: 1800-2200
W: 800-1200
D: 400-800
Floor Standing Enclosure
Visit our website at www.eldon.com
Floor Standing Enclosures
MCSS
stainless steel, single door
ELDON CS
MCDS
stainless steel, double door
IP 56, NEMA 12, 13, IK 10
IP 55, NEMA 12, 13, IK 10
H: 1800-2000
W: 600-1000
D: 500-600
H: 1800-2000
W: 1000-1200
D: 500-600
Product specifications, CAD drawings and information available on the website
Floor Standing Enclosure
31
Eldon MultiFlex® mild steel
floor standing enclosures
The MultiFlex range of floor standing enclosures comprises:
the MultiFlex C for Combination as a combinable enclosure with open sides.
Technical Information
The frame is manufactured using 1.75mm mild
precision sheet steel, continuously laser welded
from top to bottom and on the joints. The edges
determine the degree of protection, as they do
not have sharp edges in contact with the seals.
The manufacturing concept gives the frame a high
rigidity and makes the enclosure particularly strong
with a great resistance to warping and deformation.
The required rigidity is assured by a 60 degree
angle in the profile which is folded eight times, of
which two are double bends. This assures strength
in all directions.
The frame is perforated with a network of round
(diam 4.3mm) and square (10 x 14mm) holes,
alternated on a pitch of 25mm allowing fast
time saving installation of accessories. These
hole patterns are situated both on the inside and
outside to generate high flexibility. Accessories fit
bottom, top and sides.
The frame has an external hole pattern for easy
installation of hinges and rod catches for standard
and partial doors without the need for drilling. The
external hole pattern is also used for coupling
enclosures so all installation work can be done
from the front to save time.
The open profile gives the possibility to mount
cables and accessories inside it without interfering
with the aperture.
The door is manufactured using 2mm mild sheet
steel. Inside the door there is a mounted frame
32
with holes on a 25mm pitch. This frame gives
the door extra rigidity and is removable to allow
ease of assembly for many types of applications.
Four concealed hinges allow the door to be opened
to 130° and four self-positioning locking points
assure an even pressure on the seal. Centre points
for drilling are provided in the door for easy and
quick installation of 180° hinges (accessory).
The hinges have captive hinge pins which allows
the pin to remain in place after removal of the
door. Door installation is an easy one man job due
to the integrated “hold” design which keeps the
door in place even with the hinge pins removed.
A special continuous polyurethane seal assures
the IP 55 / IP 56 NEMA 4,12 and 13 degree of
protection.
The standard fitted lock is a double-bit 3mm
insert which closes the door, moves a four point
espagnolette bar on the single and double door
versions. The opening on single door versions
is reversible without any mechanical reworking.
The rear panel is manufactured using 1.35mm
mild sheet steel and can be replaced by a plain
or transparent door. Easy one man fitting is part
of the integrated system.
The removable side panel for the enclosure is
manufactured using 1.35mm mild sheet steel. Easy
one man fitting is part of the integrated system.
The bottom of the enclosure is designed with a
large opening and covered with three removable
and interchangeable cable entry plates, made of
1.0mm Sendzimir zinc plated sheet steel.
AII parts are pre-treated with five step iron
phosphate and demineralised. After pre-treatment
all parts of the enclosures are protected with
powder paint RAL7035 Epoxy Polyester powder
coating with structured finish.
To comply with EMC guidelines, the mounting
plate is manufactured from Sendzimir zinc-plated
steel plate 2.7mm thick. This plate provides an
equipotential mass connection between all the
devices on the enclosure.
All panels are directly earthed to the enclosure
frame by their fittings or an extra fitting clip.
The mounting plate is delivered on the outside of
the packaging for easy access without unpacking
the full enclosure.
Fitted with sliding brackets, the mounting plate
rests directly onto the enclosure frame for
maximum weight support. The sliding brackets
allow an easy installation and depth adjustment
but do not interfere with the bottom cable entry
space. The position of the mounting plate in the
maximum depth of the enclosure is standard and
the use of two opposite mounting plates is possible.
Standard mounting plates can be mounted on
the side of the enclosure by using the accessory
kit MPS04.
The enclosure offers maximum protection to the
user and equipment thanks to the high protection
degree IP 55 / IP 56 - IK 10 according to lEC 60529,
EN 60529 & EN 50298
When using an interior door, modular framework
or 19” swing frame, the protection degree IP 20
is guaranteed within the enclosure. Upgrade of
this protection to IP 55 can be reached by the
use of a glazed door.
The enclosures carry the UL 50, CSA C22.2 and
KEMA approvals. Next to that the MultiFlex range
of products are covered by Lloyds Register of
shipping for use in the shipping industry.
Floor Standing Enclosures
ELDON CS
MultiFlex® mild steel
floor standing enclosures
‹‹ Removable roof plate
The roof can be replaced
by ventilation roofs,
top covers, fan trays.
‹‹ All panels are directly
earthed to the frame.
‹‹ The door is reversible
without removing the
espagnolette or
the lock system.
‹‹ The rear panel can be
replaced by a door.
‹‹ Mounting Plate brackets
do not cover the MP in
the corners so the full
surface is available for
installation (adjustable
in depth in steps of 25mm).
MCS/MCD
combinable version
THE PROFILE
The 60º bending ensures maximum rigidity.
‹‹ The versatile design of
the frame offers the possibility
to mount accessories inside
it without interfering with the
enclosure opening.
The double row of holes gives more
mounting possibilities than ever.
‹‹ 3 or 4 piece bottom plates for
easy cable entry.
Inside:
Space for earthing and cabling in the profile.
‹‹ Approvals and certifications.
Product specifications, CAD drawings and information available on the website
Floor Standing Enclosure
33
ELDON CS
Floor Standing Enclosures
MCS
Mild steel combinable version, single door enclosure
IP 56, NEMA 4, 12, 13 IK 10
MultiFlex range of mild steel single door floor standing enclosures sets new standards when it comes to
strength and ease of use. From the moment MultiFlex arrives in the panel shop, the advantages are plain to
see. It’s delivered on a pallet of exactly the same size so that it can be combined before the pallet is removed,
and the mounting plate is on the outside so you can begin work immediately.
Technical Data
Material: Frame: 1.5/1.75mm painted
steel. Door: 2mm painted steel. Rear, roof
and side panels: 1.35mm painted steel.
Mounting plate: 2.7mm galvanized steel.
Bottom plates: 1mm galvanized steel.
Lock: Espagnolette 4-point locking system.
Does not interfere with the enclosure inner
space. Standard double-bit lock with
3mm pin. Can be exchanged for standard
inserts or Euro-cylinder and swing handle.
Frame: Seam welded reversed
open profiles with 25mm hole pattern
according to DIN 43660. Including
integrated external hole pattern.
Bottom plates: Consists of three or
four (D> 600) pieces.
Door: Mounted with four hinges allowing
left or right hand opening. Including
door frame with 25mm hole pattern
Rear panel: Fitted by M6 torx screws.
Standard facilities for rear door mounting
Side panels: Supplied as an accessory.
Roof panel: Removable.
34
Floor Standing Enclosure
Mounting plate: Double folded and slides
into position. Adjustable in depth by steps of
25mm with the MPD02 accessory. Supplied
outside of the enclosure packaging.
Earthing: All panels are earthed
through their fittings and are equipped
with a separate earthing stud.
Protection: Corresponds with IP
56, NEMA 4, 12 and 13. IK 10.
Delivery: Frame with fitted door,
rear panel, roof panel, bottom plates,
mounting plate and door frame. Delivery
also includes earthing bolts. Delivered
on a pallet with identical width of the
enclosure to allow suiting without removal.
All packing material is recyclable.
Mounting requirement: Standard delivery
ready for combined installation.
For stand-alone installation add side
panels. In 400mm wide enclosures
a mounting plate, bottom plates and
door frame are not included.
Finish: RAL 7035 structured
powder coating.
Visit our website at www.eldon.com
Floor Standing Enclosures
ELDON CS
With mounting plate
Enclosure dimension
Mounting plate dimension
Bottom plate opening
H
W
D
h
w
d
W (c)
D (c)
Part No.
1800
500
600
500
400
500
600
400
500
600
400
500
600
500
400
500
600
800
400
500
600
800
400
500
600
800
600
800
600
800
1694
1694
1694
1694
1694
1694
1694
1694
1694
1694
1894
1894
1894
1894
1894
1894
1894
1894
1894
1894
1894
1894
1894
2094
2094
2094
2094
394
494
494
494
694
694
694
894
894
894
394
494
494
494
494
694
694
694
694
894
894
894
894
494
494
694
694
459
359
459
595
359
459
559
359
459
559
459
359
459
559
759
359
459
559
759
359
459
559
759
559
759
559
759
332
432
432
432
632
632
632
832
832
832
332
432
432
432
432
632
632
632
632
832
832
832
832
432
432
632
632
410
310
410
510
310
410
510
310
410
510
410
310
410
510
710
310
410
510
710
310
410
510
710
510
710
510
710
MCS18055R5
MCS18064R5
MCS18065R5
MCS18066R5
MCS18084R5
MCS18085R5
MCS18086R5
MCS18104R5
MCS18105R5
MCS18106R5
MCS20055R5
MCS20064R5
MCS20065R5
MCS20066R5
MCS20068R5
MCS20084R5
MCS20085R5
MCS20086R5
MCS20088R5
MCS20104R5
MCS20105R5
MCS20106R5
MCS20108R5
MCS22066R5
MCS22068R5
MCS22086R5
MCS22088R5
800
1000
2000
500
600
800
1000
2200
600
800
Cable enclosures: without MP, bottom plates and door frame
Enclosure dimension
Bottom plate opening
H
W
D
W (c)
D (c)
Part No.
1800
400
2000
400
400
500
600
400
500
600
800
232
232
232
232
232
232
232
310
410
510
310
410
510
710
MCS18044R5
MCS18045R5
MCS18046R5
MCS20044R5
MCS20045R5
MCS20046R5
MCS20048R5
Product specifications, CAD drawings and information available on the website
Floor Standing Enclosure
35
ELDON CS
Floor Standing Enclosures
Dimensions
36
Floor Standing Enclosure
Visit our website at www.eldon.com
Floor Standing Enclosures
ELDON CS
MCD
Mild steel combinable version, double door enclosure
IP 55, NEMA 12, 13 IK 10
With a reliable design, the MCD range of mild steel double door floor standing enclosures combines strength
and practicality in one. Infinite mounting possibilities and a complete range of accessories means you can rely
on the MCD to get the job done.
Technical Data
Material: Frame:1.5/1.75mm painted steel.
Doors: 2mm painted steel. Rear, roof and
side panels: 1.35mm painted steel.
Mounting plate: 2.7mm galvanized steel.
Bottom plates: 1mm galvanized steel.
Frame: Seam welded reversed
open profiles with 25mm hole pattern
according to DIN 43660. Including
integrated external hole pattern.
Door: Mounted with four hinges. Including
door frame with 25mm hole pattern. Doors
cannot be reversed. Separate doors to
be ordered for left hand door locking.
Rear panel: Fitted by M6 torx screws.
Standard facilities for rear door mounting.
Split rear panels in 1600 wide enclosures.
Side panels: Supplied as an accessory.
Roof panel: Removable.
Lock: Espagnolette 4-point locking
system. Does not interfere with the
enclosure inner space. Standard
double-bit lock with 3mm pin. Can
be exchanged for standard inserts or
Euro-cylinder and swing handle.
Bottom plates: Consists of
three or four (D>600) pieces.
Mounting plate: Double folded and
adjustable in depth by steps of 25mm
with the MPD02 accessory. Fitted
inside for 1600 wide enclosures.
Earthing: All panels are earthed
through their fittings and equipped
with a separate earthing stud.
Product specifications, CAD drawings and information available on the website
Finish: RAL 7035 structured
powder coating.
Protection: Corresponds with IP
55, Nema 12 & 13. IK 10.
Mounting requirement: Standard
delivery ready for combined installation. For
stand-alone installation add side panels.
Delivery: Frame with fitted doors,
rear panel, roof panel, bottom plates,
mounting plate and door frame. Delivery
also includes earthing bolts. Delivered
on a pallet with identical width of the
enclosure to allow suiting without
removal. Packing material is recyclable.
Floor Standing Enclosure
37
Floor Standing Enclosures
ELDON CS
With mounting plate
Enclosure dimension
Bottom plate opening
W
D
h
w
d
W (c)
D (c)
Part No.
1800
800
1000
500
400
500
400
500
600
500
400
500
600
800
400
500
600
800
600
600
1694
1694
1694
1694
1694
1694
1894
1894
1894
1894
1894
1894
1894
1894
1894
2094
2094
694
894
894
1094
1094
1094
694
894
894
894
894
1094
1094
1094
1094
894
1094
459
359
459
359
459
559
459
359
459
559
759
359
459
559
759
559
559
632
832
832
1032
1032
1032
632
832
832
832
832
1032
1032
1032
1032
832
1032
410
310
410
310
410
510
410
310
410
510
710
310
410
510
710
510
710
MCD18085R5
MCD18104R5
MCD18105R5
MCD18124R5
MCD18125R5
MCD18126R5
MCD20085R5
MCD20104R5
MCD20105R5
MCD20106R5
MCD20108R5
MCD20124R5
MCD20125R5
MCD20126R5
MCD20128R5
MCD22106R5
MCD22126R5
1200
2000
800
1000
1200
2200
38
Mounting plate dimension
H
1000
1200
Floor Standing Enclosure
Visit our website at www.eldon.com
Floor Standing Enclosures
ELDON CS
Dimensions
Product specifications, CAD drawings and information available on the website
Floor Standing Enclosure
39
Eldon MultiFlex® stainless steel
floor standing enclosures
The MultiFlex range of floor standing enclosures comprises:
Standard dimensions ranging from 1800 x 600 x 500mm up to 2000 x 1200 x 600mm.
Technical Information
The frame is manufactured using 1.5mm AISI 304
stainless precision sheet steel, continuously laser
welded from top to bottom. The edges determine
the degree of protection, as they do not have sharp
edges in contact with the seals.
The manufacturing concept gives the frame a high
rigidity and makes the enclosure particularly strong
with a great resistance to warping and deformation.
The required rigidity is assured by a 60 degree
angle in the profile which is folded eight times of
which two are double bends. This assures strength
in all directions.
The frame is perforated with a network of round
(diam 4.3mm) and square (10 x 14mm) holes,
alternated on a pitch of 25mm allowing fast
time saving installation of accessories. These
hole patterns are situated inside to generate high
flexibility. Accessories fit bottom, top and sides.
The open profile gives the possibility to mount
cables and accessories inside it without interfering
with the aperture.
The door is manufactured using 2mm AISI 304/
AISI 316L stainless sheet steel. Inside the door
there is a mounted frame with holes on a 25mm
pitch. This frame gives the door extra rigidity and
is removable to allow ease of assembly for many
types of applications.
40
Four concealed hinges allow the door to be opened
to 130° and four self-positioning locking points
assure an even pressure on the seal.
The hinges have captive hinge pins which allows
the pin to remain in place after removal of the
door. Door installation is an easy one man job due
to the integrated “hold” design which keeps the
door in place even with the hinge pins removed.
A special continuous polyurethane seal assures
the IP 55 / IP 56 NEMA 12, 13 degree of protection.
The standard fitted lock is a double-bit 3mm
insert which closes the door, moves a four point
espagnolette bar on the single and double door
versions. The opening on single door versions
is reversible without any mechanical reworking.
The rear panel is manufactured using 1.5mm
AISI 304 / AISI 316L stainless sheet steel and can
be replaced by a plain or transparent door. Easy
one man fitting is part of the integrated system.
The removable side panel for the enclosure is
manufactured using 1.5mm AISI 304 / AISI 316L
stainless sheet steel. Easy one man fitting is part
of the integrated system.
The bottom of the enclosure is designed with a large
opening and covered with one piece removable
cable entry plate, made of 1.5mm AISI 304 /
AISI 316L stainless steel. The bottom plate has
injected polyurethane gasket to ensure maximum
sealing.
Manufactured from 240s pre-grained stainless
steel, offering increased resistance to corrosion,
and cleaner, smoother surface suitable for extreme
harsh environments and food applications.
To comply with EMC guidelines, the mounting
plate is manufactured from Sendzimir zinc-plated
steel plate 2.7mm thick. This plate provides an
equipotential mass connection between all the
devices on the enclosure.
All panels are directly earthed to the enclosure
frame by their fittings or an extra fitting clip.
The mounting plate is fitted with sliding brackets,
the mounting plate rests directly onto the enclosure
frame for maximum weight support. The sliding
brackets allow an easy installation and depth
adjustment but do not interfere with the bottom
cable entryspace. The position of the mounting
plate in the maximum depth of the enclosure is
standard and the use of two opposite mounting
plates is possible. Standard mounting plates can
be mounted in the side of the enclosure by using
the accessory kit MPS04.
The enclosure offers maximum protection to the
user and equipment thanks to the high protection
degree IP 55 / IP 56 - IK 10 according to lEC 60529,
EN 60529 & EN 50298
When using an interior door, modular framework
or 19” swing frame, the protection degree IP 20
is guaranteed within the enclosure. Upgrade of
this protection to IP 55 can be reached by the
use of a glazed door.
The enclosures carry the UL, cUL and KEMA
approvals.
Floor Standing Enclosures
ELDON CS
MultiFlex® stainless steel
floor standing enclosures
‹‹ Removable roof plate
The roof can be replaced
by ventilation roofs,
top covers, fan trays.
‹‹ All panels are directly
earthed to the frame.
‹‹ The door is reversible
without removing the
espagnolette or
the lock system.
‹‹ The rear panel can be
replaced by a door.
‹‹ Mounting Plate brackets
do not cover the MP in
the corners so the full
surface is available for
installation (adjustable
in depth in steps of 25mm).
MCSS/MCDS stainless steel
combinable version
THE PROFILE
The 60º bending ensures maximum rigidity.
The double row of holes gives more
mounting possibilities than ever.
Inside:
Space for earthing and cabling in the profile.
Product specifications, CAD drawings and information available on the website
‹‹ The versatile design of
the frame offers the possibility
to mount accessories inside
it without interfering with the
enclosure opening.
‹‹ One piece bottom plate with
injected polyurethane gasket.
‹‹ Approvals and certifications.
Floor Standing Enclosure
41
ELDON CS
Floor Standing Enclosures
MCSS
Stainless Steel combinable version, single door enclosure.
IP 56, NEMA 12, 13 IK10
Multi-Flex range of stainless steel single door floor standing enclosures sets new standards when it comes
to strength and ease of use. The sturdy construction of the Eldon MCSS range, with its 1.5mm thick stainless
steel profile frame and 25mm hole pattern in all directions, provides high corrosion resistance and rigidity.
Intended for harsh environments, can be used as a stand alone system or suited together by the use of baying
brackets.
Technical Data
Material: AISI 304 pre-grained stainless
steel / AISI 316L
Frame: 1.5mm. Door: 2 mm . Rear,
roof and side panels: 1.5mm. Bottom
plates: 1.5mm stainless steel. Mounting
plate: 2.7mm galvanized steel.
Frame: Seam welded reversed
open profiles with 25mm hole
pattern according to DIN 43660.
Door: Mounted with four hinges allowing
left or right hand opening. Including
door frame with 25mm hole pattern.
Rear panel: Fitted by M6 torx screws.
Standard facilities for rear door mounting.
Side panels: Supplied as an accessory.
Roof panel: Removable.
42
Floor Standing Enclosure
Lock: Espagnolette 4-point locking system.
Does not interfere with the enclosure inner
space. Standard double-bit 3mm lock.
Can be exchanged for standard inserts
or Euro-cylinder and swing handle.
Finish: 240s pre-grained stainless
steel (0.5 microns average).
Bottom plates: One piece bottom
plate with injected polyurethane gasket
to ensure maximum sealing.
Delivery: Frame with fitted door,
rear panel, roof panel, bottom plates,
mounting plate and door frame. Delivery
also includes earthing bolts. Delivered
on a pallet with identical width of the
enclosure to allow suiting without
removal. All packing material is recyclable.
mounting plate is on the outside.
Mounting plate: Double folded and
slides into position. Adjustable in depth by
steps of 25mm with the MPD02 accessory.
Mounting plate is delivered attached on
the outside of the enclosure packaging.
Earthing: All panels are earthed
through their fittings and are equipped
with a separate earthing stud.
Protection: Corresponds with IP
56, NEMA 12 and 13. IK10.
Mounting requirement: Standard delivery
ready for combined installation.
For stand-alone installation add side panels.
Visit our website at www.eldon.com
Floor Standing Enclosures
Enclosure dimension
ELDON CS
Mounting plate dimension
H
W
D
h
w
1800
600
800
1000
600
800
1000
500
500
500
600
600
600
1694
1694
1694
1894
1894
1894
494
694
894
494
694
894
2000
Part No.
MCSS18065
MCSS18085
MCSS18105
MCSS20066
MCSS20086
MCSS20106
Dimensions
Product specifications, CAD drawings and information available on the website
Floor Standing Enclosure
43
ELDON CS
Floor Standing Enclosures
MCDS
Stainless steel combinable version, double door enclosure.
IP 55, NEMA 12, 13 IK10
As the double door version of MCSS, the MCDS offers the same improved design, strength and corrosion
resistance. Can be used as a stand alone system or suited together by the use of baying brackets. Intended
for harsh environments such as the food and chemical industries, outdoor applications and marine
environments.
Technical Data
Material: AISI 304 pre-grained stainless
seel / AISI 316L. Frame: 1.5mm.
Door: 2mm. Rear, roof and side
panels: 1.5mm. Bottom plates:
1.5mm stainless steel. Mounting
plate: 2.7mm galvanized steel.
Frame: Seam welded reversed
open profiles with 25mm hole
pattern according to DIN 43660.
Door: Mounted with four hinges. Including
door frame with 25mm hole pattern.
Rear panel: Fitted by M6 torx screws.
Standard facilities for rear door mounting.
Split rear panels in 1600 wide enclosures.
Side panels: Supplied as an accessory.
Lock: Espagnolette 4-point locking system.
Does not interfere with the enclosure inner
space. Standard double-bit 3mm lock.
Can be exchanged for standard inserts
or Euro-cylinder and swing handle.
Finish: 240s pre-grained stainless
steel (0.5 microns average).
Bottom plates: One piece bottom
plate with injected polyurethane gasket
to ensure maximum sealing.
Delivery: Frame with fitted doors,
rear panel, roof panel, bottom plates,
mounting plate and door frame. Delivery
also includes earthing bolts. Delivered
on a pallet with identical width of the
enclosure to allow suiting without
removal. Packing material is recyclable.
Mounting plate: Double folded and
adjustable in depth by steps of 25mm
with the MPD02 accessory. Mounting
plate is delivered attached on the
outside of the enclosure packaging.
Earthing: All panels are earthed
through their fittings and are equipped
with a separate earthing stud.
Protection: Corresponds with
IP 55, Nema 12 & 13. IK10.
Mounting requirement: Standard delivery
ready for combined installation.
For stand-alone installation add side panels.
Roof panel: Removable.
44
Floor Standing Enclosure
Visit our website at www.eldon.com
Floor Standing Enclosures
Enclosure dimension
Mounting plate dimension
H
W
D
h
w
1800
1000
1200
1200
500
500
600
1694
1694
1894
894
1094
1094
2000
ELDON CS
Part No.
MCDS18105
MCDS18125
MCDS20126
Dimensions
Product specifications, CAD drawings and information available on the website
Floor Standing Enclosure
45
Floor Standing Accessories
ELDON CS
SPMS
SPM
Side panels Stainless steel
Side panels
Description: Stainless steel side panels. With
an injected polyurethane gasket.
Description: Easy one man assembly. Sealed by an
extruded, one piece polyurethane gasket and mounted
with 8 screws. Can be replaced by the side door DS.
Material: 1.5mm AISI304/AISI 316L pre-grained stainless steel.
Finish: 240s pre-grained stainless steel (0.5 microns average).
Material: 1.35mm steel plate.
Includes: Mounting material.
Finish: RAL 7035 structured powder coating.
Pack quantity: 2 panels.
Protection: IP 56, NEMA 4, 12 & 13.
Enclosure dimension
Pack quantity: 2 panels with mounting accessories.
H
W
Part No.
1800
500
SPMS1805
600
SPM1106R5
2000
600
SPMS2006
1400
600
SPM1406R5
1600
600
SPM1606R5
1800
400
SPM1804R5
500
SPM1805R5
600
SPM1806R5
800
SPM1808R5
400
SPM2004R5
500
SPM2005R5
600
SPM2006R5
800
SPM2008R5
600
SPM2206R5
800
SPM2208R5
H
D
1100
2000
2200
46
Floor Standing Accessories
*Delivery times upon request.
Visit our website at www.eldon.com
Part No.
Floor Standing Accessories
ELDON CS
PF
PS
Front/rear Plinths
Side Plinths
Description: Front and rear plinth sections. For cabling without any
restrictions and in accordance with the VDE 0113 standard. The
plinth consists of four corner pieces with removable front covers.
The side panels PS/PSK are to be ordered separately. Produced
in 100mm and 200mm heights. 200mm high plinths are delivered
with a rear cover for cabling that consists of two removable panels
100mm high. The front cover is a one piece panel of 200mm high.
All panels have double returns on each panel for added strength.
Description: Side panels to cover the openings in the depth
of the PF plinth. Double folded panels for maximum strength.
Material: Corner pieces in 2mm and panels in 1.5mm mild steel.
Finish: RAL 7022 structured powder coating.
Material: 1.5mm steel plate.
Finish: RAL 7022 structured powder coating.
Pack quantity: 2 panels. Mounting accessories included
with PF/PV.
H
D
Part No.
100
400
PS1040
500
PS1050
600
PS1060
800
PS1080
400
PS2040
500
PS2050
600
PS2060
800
PS2080
Pack quantity: 1 set of 4 corner pieces including covers.
Front and rear panel (2 rear panels for 200mm, high
plinths) with mounting accessories. Mounting accessories
for side panels PS or transversal profiles PCP.
Mounting requirement: When adding enclosures, it
is recommended to add the side panels PS/PSK for a
complete plinth. When combining enclosures add transversal
panels PCP for cable duct support and extra rigidity.
H
W
Part No.
100
400
PF1040
500
PF1050
600
PF1060
200
800
PF1080
1000
PF1100
1200
PF1120
400
PF2040
500
PF2050
600
PF2060
800
PF2080
1000
PF2100
1200
PF2120
200
* For enclosures 1600 mm wide use 2 x 800 mm wide plinth
Product specifications, CAD drawings and information available on the website
Floor Standing Accessories
47
Floor Standing Accessories
ELDON CS
PFS
PSS
Front/Rear plinth, stainless steel
Side Plinths
Description: Front and rear plinth sections. For cabling without any
restrictions and in accordance with the VDE 0113 standard. The
plinth consists of four corner pieces with removable front covers.
The side panels PSS are to be ordered separately. Produced in
100mm and 200mm heights. 200mm high plinths are delivered
with a rear cover for cabling that consists of two removable panels
100mm high. The front cover is a one piece panel of 200mm high.
All panels have double returns on each panel for added strength.
Description: Side panels to cover the openings in the depth of
the PFS plinth. Double folded panels for maximum strength.
Material: AISI304/AISI316L pre-grained stainless steel.
Corners 2mm, and panels 1mm.
Finish: 240s pre-grained stainless steel (0.5 microns average).
Material: AISI304/AISI316L pre-grained stainless steel.
Panels: 1mm.
Finish: 240s pre-grained stainless steel (0.5 microns average).
Pack quantity: 2 panels. Mounting accessories included with PFS.
H
D
Part No.
100
400
PSS1040
500
PSS1050
600
PSS1060
400
PSS2040
500
PSS2050
600
PSS2060
Pack quantity: 1 plinth with mounting material.
Enclosure dimension
H
W
Part No.
100
600
PFS1060
800
PFS1080
1000
PFS1100
1200
PFS1120
600
PFS2060
800
PFS2080
1000
PFS2100
1200
PFS2120
200
48
Floor Standing Accessories
200
Visit our website at www.eldon.com
Floor Standing Accessories
ELDON CS
D
Plain door
Description: Standard door equipped
with doubl-bit 3mm lock system and
door frame. Door accessory kit DMK
(hinges, rod catches) to be ordered
separately. Allows all the options of the
locking program and 180° hinges.
Material: 2mm steel plate.
Maximum load: 800N.
Finish: RAL 7035 structured
powder coating.
Mounting requirement: Use hinge kit
DMK01 if no door was fitted previously.
Pack quantity: 1 piece.
Left door
Plain door
Enclosure dimension
Enclosure dimension
H
W
Part No.
H
W
600
D1606LR5
400
D1804LR5
D1805LR5
1100
600
D1106R5
1600
1400
800
D1408R5
1800
1600
1800
2000
2200
Part No.
600
D1606R5
500
800
D1608R5
600
D1806LR5
1000
D1610R5
800
D1808LR5
400
D2004LR5
2000
500
D1805R5
600
D1806R5
500
D2005LR5
800
D1808R5
600
D2006LR5
1000
D1810R5
800
D2008LR5
500
D2205LR5
600
D2206LR5
500
D2005R5
600
D2006R5
2200
Right door
800
D2008R5
1000
D2010R5
Enclosure dimension
600
D2206R5
H
W
800
D2208R5
1600
600
D1606RR5
1800
400
D1804RR5
500
D1805RR5
600
D1806RR5
800
D1808RR5
400
D2004RR5
500
D2005RR5
600
D2006RR5
800
D2008RR5
500
D2205RR5
600
D2206RR5
2000
2200
Product specifications, CAD drawings and information available on the website
Part No.
Floor Standing Accessories
49
Floor Standing Accessories
ELDON CS
DGC
DHN
Glazed door
Door hinges 180°
Description: Adjustable door hinges which allows
the door to open 180°. Machining is required.
Material: Die-cast alloy.
Finish: Structured blue.
Maximum load: 800N (per kit).
Pack quantity: 4 hinges with mounting accessories.
Description: Standard door with fitted clear safety glass to view
the inside of the enclosure. Equipped with double-bit 3mm lock
system and door frame. Allows all options of the locking program.
Description
Part No.
Adjustable 180 degree hinge
DHN180
DMK
Material: Frame: 2mm steel plate.
Viewing area: 4mm clear safety glass.
Door mounting kit
Finish: RAL 7035 structured powder coating.
Protection: Complies with IP 55, NEMA 12, IK 10.
Pack quantity: 1 piece.
Mounting requirement: Use hinge kit DMK01 if no door
was fitted previously.
H
W
VA h
VA w
1100
600
876
415
Part No.
DGC1106R5
1400
800
1176
615
DGC1408R5
1600
600
1376
415
DGC1606R5
800
1376
615
DGC1608R5
1800
600
1576
415
DGC1806R5
800
1576
615
DGC1808R5
2000
600
1776
415
DGC2006R5
800
1776
615
DGC2008R5
Description
2200
600
1976
415
DGC2206R5
Single door mounting kit
DMK01
800
1976
615
DGC2208R5
Double door mounting kit
DMK02
Description: Required when fitting a door. Only needed
when there was no door mounted previously.
Pack quantity: 1 complete kit with hinges,
rod catches and mounting accessories.
Part No.
Doubledoor mounting kit Multi
50
Floor Standing Accessories
Visit our website at www.eldon.com
DMK02K
Floor Standing Accessories
ELDON CS
DRA
MP
Document pocket
Mounting plates
Description: Self adhesive, for DIN A4.
Usable depth: 30mm.
Material: Thermoplastic.
Finish: RAL 7035.
Pack quantity: 1 document pocket with double sided tape.
Description
Document pocket A4/legal
Part No.
DRA04
Description: Standard mounting plate. It can also be
mounted on the side of an enclosure by using MPS kit
or slid in from the side with the MTS profile. For heavy
loads in vibrating environments use mounting plate
reinforcement profile MPR and MPE or MPEF brackets.
Material: 2.7mm galvanized steel.
Pack quantity: 1 piece.
Maximum load: 6000N.
DSTP
Mounting requirement: Use MPA for mounting
the MP inside the enclosure. 500mm deep mounting
plates for side mounting available on request.
Door stop
H
W
h
w
Part No.
600
1494
494
MP1606
800
1494
694
MP1608
1000
1494
894
MP1610
1200
1494
1094
MP1612
400
1694
294
MP1804
500
1694
394
MP1805
600
1694
494
MP1806
Material: Zinc plated steel.
800
1694
694
MP1808
Pack quantity: 1 piece with mounting accessories.
1000
1694
894
MP1810
1200
1694
1094
MP1812
1600
1694
1494
MP1816
400
1894
294
MP2004
500
1894
394
MP2005
600
1894
494
MP2006
1600
1800
Description: To lock an open door in position. Mounted
directly to the door frame and on the enclosure profile.
Description
Part No.
Door stop
DSTP02
2000
DSW
Door switch
2200
Description: Activates any electrical device (lighting, coolers,
etc). Can be fitted after installing the enclosure thereby keeping
the door opening free. Fixed (without screws) on the inside
hole pattern of the enclosure's frame. Cable entry M 20.
800
1894
694
MP2008
1000
1894
894
MP2010
1200
1894
1094
MP2012
1600
1894
1494
MP2016
600
2094
494
MP2206
800
2094
694
MP2208
1000
2094
894
MP2210
1200
2094
1094
MP2212
Switch capacity: 6A-230V
Approvals: CE, GOST, UL.
Pack quantity: 1 piece with mounting accessories.
Description
Door switch. UL - Approved
Part No.
DSW01
Product specifications, CAD drawings and information available on the website
Floor Standing Accessories
51
Floor Standing Accessories
ELDON CS
MPF
MPD
Filler plates
Mounting plate adjustment brackets
Description: Covers the space between pairs of adjacent
mounting plates to provide a continuous working surface,
when two enclosures are mounted together.
Description: With these brackets the mounting plate can be
adjusted in depth by steps of 25mm in the enclosure frame.
Material: 3mm zinc plated steel.
Material: 2mm zinc plated steel.
Pack quantity: 2 brackets with mounting accessories.
Pack quantity: 1 plate with mounting accessories.
H
Part No.
1800
MPF1800
2000
MPF2000
2200
MPF2200
Description
Part No.
MP Depth adjustment bracket
MPD02
CLPK
Click-in profile
MPA
Mounting brackets front fixing
Description: Equal to the top mounting brackets of the mounting
plate. To fix profiles and plates, e.g. a wooden mounting plate,
in the enclosure. Adjustable in depth in steps of 25mm.
Material: 1.5mm zinc plated steel.
Material: Zinc plated steel.
Pack quantity: 4 profiles.
Pack quantity: 2 sets top brackets with mounting accessories.
Mounting requirement: Add CLPF profiles with the same
height of the enclosure in the rear to fit CLPK profiles in depth.
Description
Part No.
Mounting plate brackets
52
Description: Universal profile for both depth and width fitting
on the 25mm DIN hole pattern of the enclosure's frame or in
combination with the VB profiles. The 75mm wide profile is
equipped with three rows of holes of which one is turned 90º. This
makes it possible to mount the CLPF profiles in both directions.
The CLPK can be secured by the use of self tapping screws.
Floor Standing Accessories
For
enclosure
MPA04
Description
W/D
Max. loading
Part No.
Click-in profile 400
400
1600 N
CLPK400
Click-in profile 500
500
1600 N
CLPK500
Click-in profile 600
600
1600 N
CLPK600
Click-in profile 800
800
1200 N
CLPK800
Click-in profile 1000
1000
1200 N
CLPK1000
Click-in profile 1200
1200
1000 N
CLPK1200
Visit our website at www.eldon.com
Floor Standing Accessories
ELDON CS
CNM
CLPF
Cage nuts
Mounting profile
Description: Cage nuts designed for universal use on
the enclosure frame profiles and the profiles system.
Description: The CLPF profile system is a 40mm wide and
25mm high profile, which can be mounted in all directions on the
enclosure's frame. It can also be used in combination with the
CLPK and the VB profiles. By turning the profile it can be used
as a standard CP20/40 profile in combination with GLM 40/6
sliding nut, to mount installation material which needs adjusting in
depth. The profiles, when mounted onto the enclosure's frame are
flush with the enclosure's profiles. Two rows of hole patterns for
cage nut fixing and self tapping screws are provided. For 90mm
wide profiles two profiles can be mounted next to each other.
Pack quantity: 50 pieces.
Description
Thread
Part No.
Cage nut M6 1 off 7862010503
M6
CNM615
Cage nut M8
M8
CNM815
CNT
Material: Zinc plated steel.
Pack quantity: 4 profiles including fixing accessories.
Extrude-tite screws
H/W
W/D
Max. loading
Horizontal C
Max. loading
Horizontal ∏
1000
1000
800N
1000N
CLPF1000
1200
1200
800N
1000N
CLPF1200
1400
1400
Only vertical
loads allowed
Only vertical
loads allowed
CLPF1400
1600
1600
Only vertical
loads allowed
Only vertical
loads allowed
CLPF1600
1800
1800
Only vertical
loads allowed
Only vertical
loads allowed
CLPF1800
Description: Torx extrude-tite screws for fitting
accessories, click in profiles, earthing etc.
2000
2000
Only vertical
loads allowed
Only vertical
loads allowed
CLPF2000
Pack quantity: 250 pieces.
2200
2200
Only vertical
loads allowed
Only vertical
loads allowed
CLPF2200
Part No.
400
400
800N
1000N
CLPF400
Description
Thread
Part No.
Extrudetite screws M5
M5
CNT05
500
500
800N
1000N
CLPF500
Extrudetite screws M6
M6
CNT06
600
600
800N
1000N
CLPF600
800
800
800N
1000N
CLPF800
Product specifications, CAD drawings and information available on the website
Floor Standing Accessories
53
Floor Standing Accessories
ELDON CS
CNS
CCI
Screws for clip-on cage nuts
Internal baying brackets
Description: Socket head screws M6x12
and M8x12 for clipon cage nuts.
Description: Brackets provide a rigid reinforcement
of the enclosure assembly. The correct spacing
between the enclosures is assured.
Pack quantity: 250 pieces.
Description
Thread
Part No.
Sockethead screws for cage nut
M6
CNS612
Sockethead screws for cage nut
M8
CNS812
Material: 3mm zinc plated steel.
Pack quantity: 6 brackets with mounting accessories.
Description
Part No.
Internal combining kit
CCE
CCI06
CCM
External baying brackets
Internal corner baying kit
Description: Brackets mounted on the outside hole pattern
of the frame ensuring a strong and 3 dimensional alignment of
the bayed enclosures with "auto spacer" function. This method
of baying enclosures also has the advantage of realizing a
direct earthing connection between the enclosure frames.
Material: 3mm zinc plated steel.
Part No.
Ext. Auto spacer comb. Kit
54
Floor Standing Accessories
Material: 3mm zinc plated steel.
Pack quantity: 4 brackets with mounting accessories.
Pack quantity: 6 brackets with mounting accessories.
Description
Description: For extra support when bayed enclosures are fully
equipped and require lifting.
Can be used together with SPD separation plates.
CCE06
Description
Part No.
Corner combining bracket MF
Visit our website at www.eldon.com
CCM04
Floor Standing Accessories
ELDON CS
LC
LSSI
Lifting device
Profile half cylinder locks
Description: For optimal weight distribution when lifting bayed
enclosures. To be used in combination with baying bracket.
Material: 5mm zinc plated steel.
Pack quantity: 2 pieces with mounting accessories.
Description
Pack quantity
Lifting device
2
Part No.
Description: Profile half cylinder inserts. To be used
in the swinghandles LSC501 / LSC503. Can also
be mounted on all ElRack outlaying doors.
Pack quantity: 1 piece
Description
Part No.
RONIS HALF PROF INSERT 21323C
LSSI521
LE MultiFlex
RONIS ROUND PROF INSERT
21323C
LSSI522
Lifting eye bolts
Square 7mm insert
LSSI523
Square 8mm insert
LSSI524
Triangle 7mm insert
LSSI526
Triangle 8mm insert
LSSI527
DIN 3mm insert
LSSI528
DIN 5mm insert
LSSI529
DAIMLER BENZ
LSSI530
Round cylinder, key NºC2233
LSSI532
Maximum load: 3400N per lifting eye with max angle
of 45°. Please follow Eldon lifting instructions.
Cylinder nr E1 (VW) excl key
LSSI533
Adapter half prof cyl DIN18252
LSSI534
Pack quantity: 4 pieces.
Adapter Abloy Asa Cylinders
LSSI535
Push button insert
LSSI536
CNOMO (Automotive Ind)
LSSI572
LC02
Description: M12 thread. Mounts directly to the frame corner
pieces of the enclosure. Complies with DIN 580 lifting requirements.
Description
Pack quantity
Part No.
Lifting eyes, DIN 580
4
LE9304
Lifing eyes, stainless steel
4
LE9304SS
Profile half cyl Ronis 2132E
LSSI5212132E
LE9304K
Profile half cyl Ronis 3121E
LSSI5213121E
Lifting eyes, DIN 580
4
* Other key numbers available on request.
** Key numbers 333, 1333, EK333 and GX130 are equal
***Order separate key LSMK for Square 8mm and Triangle 8mm.
LSC
Swing handle lock cover
Description: Swing handle for LSSI range inserts.
Pack quantity: 1 swing handle.
Mounting requirement: Add LSSI inserts when required.
Description
Part No.
Swinghandle without insert
LSC501
Swinghandle padlock w/o insert
LSC503
Product specifications, CAD drawings and information available on the website
Floor Standing Accessories
55
Floor Standing Accessories
ELDON CS
LTL
COF
Enclosure light
Female connectors
Description: Fluorescent lamp equipped with switch electronic
starter integrated socket and a protection cap. A male
connector is provided for connection to the power on one side
and by a pass-through circuit to a female connector allows a
further connection on the other side. An additional connector
allows the activation of the lamp by a door switch.
Pack quantity: Pack of 5 female connectors.
Power: Standard socket:120/230 V/ 50/60Hz / 16A Schuko.
Other country specific sockets available on request.
Pack quantity: 1 piece with tube and fixing devices.
Approvals: GOST.
Description
Part No.
Female connectors
COF05
Female connectors for LTSL
*Note: To be used with LTSL
Approvals: GOST.
H
W
D
Voltage
(V)
Watt
Frequency
Part No.
38
400
97
230
14W 230V
50 Hz
LTL1425
38
630
97
230
18W 230V
50 Hz
LTL1825
Add door switch with lead (DSW +DSWC) for automatic power when
door opens.
56
Floor Standing Accessories
Visit our website at www.eldon.com
COF05L*
Human-Machine Interface
ELDON CS
HUMAN-MACHINE
INTERFACE
Product specifications, CAD drawings and information available on the website
Human-Machine Interface
57
Human-Machine Interface
ELDON CS
MPG
One-piece consoles in mild steel
IP 66/NEMA 4,12,13; IP 55/ NEMA 12, 13
The MPG simple but effective one-piece console is available in five sizes. The top desk panel is held open by a
self-engage/self-release mechanical panel stay and combines with the removable rear panel and front door, to
ensure convenient access. A range of 19” accessories adds further versatility.
Technical Data
Material: MPG: Body and door: 1.5mm
mild steel. Rear panel1.5mm mild steel.
Bottom plates 1.2mm galvanized steel.
Mounting Plate 2.5mm galvanized steel.
Body: Folded and seam welded.
Integrated plinth.
Doors and panels: Single folded surface
mounted with hinges allowing left and
right-hand opening to base door. Angle
12° from horizontal. Concealed hinges
on top edge allow 80° opening. Panel
held open by self engage/self release
mechanical panel stay. Double doors on
1200 and 1600 mm wide base units.
58
Human-Machine Interface
Mounting plate: Standard
mounting plate in base unit.
Protection: Single door: IP 66/NEMA 4, 12
13 Double doors: IP 55/NEMA 12 and 13.
Cable inlet: Bottom opening for
cable access. Bottom plate for cable
glanding supplied as standard.
Delivery: Mounting plate and suitable
nuts and washers for earthing. The
console is delivered on a wooden pallet.
Lock: Double-bit 3mm locks for
top panel. For base, two double-bit
3mm locks. Other options available.
See wall mounting section.
Earthing: M8 threaded studs on body,
door, top panel and rear panel.
Finish: RAL 7035 structure
powder coating.
Visit our website at www.eldon.com
Human-Machine Interface
ELDON CS
Mild steel
H
985
W
D
h
600
800
1000
1200
1600
400
400
400
400
400
790
790
790
790
790
w
499
699
899
1099
1499
Usable depth
333
333
333
333
333
Part No.
MPG06R5
MPG08R5
MPG10R5
MPG12R5
MPG16R5
Note: Only 1200 and 1600 wide consoles have double doors.
Dimensions
Product specifications, CAD drawings and information available on the website
Human-Machine Interface
59
Human-Machine Interface
ELDON CS
MPC
Console system
IP 66/NEMA 4, 12, 13; IP 55/ NEMA 12,13
Flexible console system, allows a versatile number of combinations to configure the system to your design.
The top section and desk panels are held open by a self-engage/self-release mechanical panel stay and
combines with the top removable rear panel and front door, to ensure convenient access. A range of 19”
accessories adds further versatility. The MPC range is fully compatible with the stainless steel MPCS units,
providing additional protection if required.
Technical Data
Material: Body and door: 2.0mm mild
steel. Rear panel 1.5mm mild steel.
Bottom plates: 1.2mm galvanized steel.
|Mounting plate: 2.5 mm galvanized steel.
Mounting plate: Standard in base
unit. Fixed by fixing brackets on C rail,
top and bottom for depth adjustment.
Optional in desk and top section units.
Body: Folded and seam
welded. Integrated plinth.
Lock: Double-bit 3mm locks for top
section and desk unit. For base, two
double-bit 3mm locks. Other options
available, see wall mounting section.
Doors and panels: Single folded surface
mounted with hinges allowing left and
right-hand opening to base door. Top
section and desk panels held open by
self engage/self release mechanical panel
stays. Concealed hinges allowing 90°
opening on the desk. Double doors on
1200 and 1600 mm wide base units.
60
Human-Machine Interface
Cable access: Bottom opening in base
unit for cable access. Bottom plates for
cable glanding supplied as standard.
Earthing: M8 threaded studs on
bodies, doors and rear panels.
Finish: MPC: RAL 7035
structure powder coating.
Protection: MPC single door: Corresponds
with IP 66 and NEMA 4, 12 and 13.
MPC double door: Corresponds
with IP 55 and NEMA 12 and 13.
Delivery: The base unit is provided with a
mounting plate as standard. Desk and top
section units have mounting plates provided
as accessories. All top and base apertures
can be closed by choosing the appropriate
accessory plate. Suitable nuts and washers
for the various earthing studs are provided.
Visit our website at www.eldon.com
Human-Machine Interface
ELDON CS
Top section units | Mild steel
H
500
500
500
500
500
W
D
600
800
1000
1200
1600
494
494
494
494
494
Part No.
MPC061R5
MPC081R5
MPC101R5
MPC121R5
MPC161R5
Desk units | Mild steel
H
250
250
250
250
250
W
D
600
800
1000
1200
1600
985
985
985
985
985
Part No.
MPC062R5
MPC082R5
MPC102R5
MPC122R5
MPC162R5
Base units with mounting plate | Mild steel
H
700
700
700
700
700
W
D
h
600
800
1000
1200
1600
500
500
500
500
500
590
590
590
590
590
w
499
699
899
1099
1499
Usable depth
Part No.
470,5
470,5
470,5
470,5
470,5
MPC063R5
MPC083R5
MPC103R5
MPC123R5
MPC163R5
Note: Only 1200 and 1600 wide consoles have double doors.
Product specifications, CAD drawings and information available on the website
Human-Machine Interface
61
ELDON CS
Human-Machine Interface
Dimensions
62
Human-Machine Interface
Visit our website at www.eldon.com
Human-Machine Interface
Product specifications, CAD drawings and information available on the website
ELDON CS
Human-Machine Interface
63
ELDON CS
Human-Machine Interface
MCM
Mild steel industrial computer enclosure
IP 44, NEMA 12. IK 10
Multi-purpose IP 44 computer enclosure in attractive two-tone colour (RAL 7035 & RAL 7015), is suitable
for office and factory environments. The rigid construction offers suitable protection against many adverse
conditions and theft, while the clever design quickens installation and offers multiple mounting options. MCM
is delivered complete with monitor shelf. Non-standard colours are available on request.
Technical Data
Material: Frame: 1.5mm steel plate.
Roof and side panels: 1.35mm steel
plate. Doors: 2mm steel plate. Bottom
plates: 1mm galvanized steel.
Lock: Espagnolette 4 point locking system.
Standard double-bit lock with 3mm pin.
Can be exchanged for standard inserts
or Euro-cylinder and swing handle.
Frame: Seam welded reversed open
profiles with 25mm hole pattern according
to double-bit 3mm 43660. Including
integrated external hole pattern.
Bottom plates: Consists of three
or four (D> 600) pieces.
Door: Mounted with two hinges per
door. Top door with safety glass.
Viewing area for 14"- 21"monitor.
Rear door: Mounted with hinges allowing
left or right hand opening. Including
door frame with 25mm hole pattern.
Keyboard panel: Vertical opening
keyboard panel. Sliding mouse pad allowing
left or right hand use. Max keyboard
dimensions 470 mm x 190 mm x 45 mm.
64
Human-Machine Interface
Finish: Two tone finish. Doors, side
panels, roof and frame in RAL 7035
structured powder coating. Keyboard
side panels and monitor door pane in
RAL 7015 structured powder coating.
Other colour schemes optional.
Features: Special design of roof and
side panels for theft security. All panels
are only accessible when the doors are
unlocked. Your own company name can
be inserted in the top plinth (option).
Protection: Complies with IP 44,
NEMA 12, IK 10. With keyboard tray
opened corresponding with IP 30.
Delivery: Frame with fitted rear door,
side panels, roof panel, monitor door,
keyboard panel, bottom plates and
monitor shelf with clamps to fix the
monitor. Delivery also includes earthing
bolts. The enclosure is delivered on a
pallet identical to the enclosure width.
All packing material is recyclable.
Mounting requirement: Equipment
shelves need to be added.
Visit our website at www.eldon.com
Human-Machine Interface
ELDON CS
Enclosure dimension
H
1600
W
D
600
600
800
Part No.
MCM16066
MCM16068
Dimensions
Product specifications, CAD drawings and information available on the website
Human-Machine Interface
65
ELDON CS
Thermal Management
thermal
management
Systems
66
208
Thermal Management
Visit our website at www.eldon.com
Thermal Management
ELDON CS
EF
High flow Filter fan
IP 54
Easy to install filter fans, with time saving click-in system. All models are UL approved.
Technical Data
Description: Filter fan for forced ventilation.
Eldon filter fans save time on installtion as
they are installed with a click‑in system
without screws. The hinged front cover
can be easily opened for quick and easy
filter replacement. The airflow direction
and the connection position can easily
be changed. Filtration efficiency of
88% ( 91% for EF500R5 and above ).
Sleeve bearing, and ball bearing for DC
filter fans and EF250R5 and above.
Material: Front cover made of
injection-moulded thermoplastic,
self-extinguishing, UL94V0.
Protection: IP 54, NEMA12.
Filter: Grade G3, and grade G4 for
EF500R5 and above (according to EN 779).
Approvals: CE, cUL, UL.
Finish: RAL 7035.
Pack quantity: 1 fan with filter.
Temperature resistance: -15ºC to +55ºC.
Type of connection: Depending
on the filter fan size, type 1 cable
length 310mm, type 2 terminal strip,
type 3 spring-type terminal.
230 V, 50/60 HZ
Connection Type
Current (A)
Noise (dB)
EF+EFA Air flow
( m³/h)
Free air flow
(m³/h)
Part No.
1
0.07
33
16
25
EF100R5
2
0.12
44
44
61
EF200R5
2
0.12
40
110
82
EF220R5
3
0.12
40
116
156
EF250R5
3
0.32
42
231
256
EF300R5
3
0.30
54
370
480
EF500R5
3
0.51
63
445
640
EF600R5
3
0.59
66
560
845
EF700R5
Product specifications, CAD drawings and information available on the website
Thermal Management
67
Thermal Management Accessories
ELDON CS
EFA
ETR200
Exhaust filter
Thermostat
Description: Exhaust filter to be used for natural ventilation,
or for forced ventilation working with filter fans EF. Eldon
exhaust filters save us time because are installed with a
click‑in system without screws. The hinged front cover can be
easily opened for quick and easy filter replacement. Filtration
efficiency of 88% ( 91% for EFA500R5 and above ).
Description: Thermostat with changeover contacts to
manage temperature in panels. Sensor element thermostatic
bimetal. Mounting clip for 35mm DIN rail (EN 60715).
Material: Front cover made of injection-moulded thermoplastic,
self-extinguishing, UL94V0. FilterGrade G3, and grade
G4 for EFA500R5 and above (according to EN 779).
Switch capacity: NC contact, 100-250V AC, 10(2)A.
NO contact, 100-250V AC, 5(2)A, for 230V AC operation
only. DC, 30W. Value in brackets for inductive load.
Temperature resistance: -15ºC to +55ºC.
Operating temperature: -40 to +80°C.
Protection: IP54, NEMA12.
Service life: > 100,000 cycles.
Finish: RAL 7035.
Connection: Screw terminal for cable (0.5 to 2.5 mm2).
Approvals: CE, cUL, UL.
Protection: IP 20.
Pack quantity: One exhaust filter.
Approvals: CE
Setting range: 0ºC to 60ºC
Material: Plastic according to UL94 V-0
Finish: RAL 7035.
Cut out dim.
Part No.
92 x 92 mm
EFA100R5
125 x 125 mm
EFA200R5
177 x 177 mm
EFA220R5
223 x 223 mm
EFA250-300R5
291 x 291 mm
EFA500-700R5
Pack quantity: 1 piece.
Description
Weight
Part No.
Changeover contact
0.075 kg
ETR200
ETF
Hygrostat
Description: Mechanical hygrostat designed to control
heaters when the pre-set or fixed relative humidity is
exceeded. The relative humidity must be kept above the
dew point to prevent condensation and corrosion inside the
enclosure. Mounting clip for 35mm DIN rail (EN 60715).
Material: Plastic according to UL94 V-0
Switch capacity: 250V AC, 5A. DC, 20W (30W ETF2000).
Operating temperature: 0ºC to +60°C.
Service life: > 50,000 cycles.
Connection: 2 pole terminal for 2.5mm².
Protection: IP 20.
Approvals: CE, (ETF2000 – cUL, GOST)
Finish: RAL 7035.
Pack quantity: 1 piece.
68
Thermal Management Accessories
Description
Setting range
Weight
Part No.
Pre-set hygrostat
65%
0.040kg
ETF200
Adjustable hygrostat
40% to 90%
0.055kg
ETF2000
Visit our website at www.eldon.com
Index
ELDON CS
Index
Part No.
A
ADO200S
ADO201
ADR1001030
ADR1001030-316
ADR1001230
ADR1001230-316
ALL509
AMG155
AMG210
AMG260
AMG300
AMG400
ASR0182415
ASR0182415-316
ASR0242415
ASR0242415-316
ASR0243615
ASR0243615-316
ASR0302015
ASR0302015-316
ASR0362415
ASR0362415-316
ASR0403015
ASR0403015-316
ASR0404021
ASR0404021-316
ASR0406021
ASR0406021-316
ASR0504021
ASR0504021-316
ASR0505021
ASR0505021-316
ASR0604021
ASR0604021-316
ASR0606021
ASR0606021-316
ASR0606030
ASR0606030-316
ASR0608030
ASR0608030-316
ASR0806021
ASR0806021-316
ASR0806030
ASR0806030-316
ASR0808030
ASR0808030-316
ASR1008030
ASR1008030-316
ASR1208030
ASR1208030-316
ASR1208040
ASR1208040-316
ASR1408040
ASR1408040-316
AW41
AW41
Page
25
25
24
24
24
24
25
25
25
25
25
25
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
25
28
B
BMP1515
BMP1530
BMP2020
BMP2030
BMP2040
BMP2050
BMP2060
BMP2080
BMP3030
BMP3040
BMP3050
BMP3060
BMP4040
BMP4060
BMP4080
BPP15
BPP20
BPP30
BPP40
BPP50
BPP60
BPP80
C
CCE06
CCI06
CCM04
CLPF1000
CLPF1200
CLPF1400
CLPF1600
CLPF1800
CLPF2000
CLPF2200
CLPF400
CLPF500
CLPF600
CLPF800
CLPK1000
CLPK1200
CLPK400
CLPK500
CLPK600
CLPK800
CNM615
CNM815
CNS612
CNS812
CNT05
CNT06
COF05
COF05L*
D
D1106R5
D1408R5
D1606LR5
D1606R5
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
54
54
54
53
53
53
53
53
53
53
53
53
53
53
52
52
52
52
52
52
53
53
54
54
53
53
56
56
49
49
49
49
D1606RR5
D1608R5
D1610R5
D1804LR5
D1804RR5
D1805LR5
D1805R5
D1805RR5
D1806LR5
D1806R5
D1806RR5
D1808LR5
D1808R5
D1808RR5
D1810R5
D2004LR5
D2004RR5
D2005LR5
D2005R5
D2005RR5
D2006LR5
D2006R5
D2006RR5
D2008LR5
D2008R5
D2008RR5
D2010R5
D2205LR5
D2205RR5
D2206LR5
D2206R5
D2206RR5
D2208R5
DGC1106R5
DGC1408R5
DGC1606R5
DGC1608R5
DGC1806R5
DGC1808R5
DGC2006R5
DGC2008R5
DGC2206R5
DGC2208R5
DHN180
DMK01
DMK02
DMK02K
DRA04
DRA04
DSTP02
DSW01
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
49
50
50
50
50
50
50
50
50
50
50
50
50
50
50
25
51
51
51
E
EF100R5
EF200R5
EF220R5
EF250R5
EF300R5
EF500R5
67
67
67
67
67
67
Product specifications, CAD drawings and information available on the website
EF600R5
EF700R5
EFA100R5
EFA200R5
EFA220R5
EFA250-300R5
EFA500-700R5
ETF200
ETF2000
ETR200
67
67
68
68
68
68
68
68
68
68
L
LC02
LE9304
LE9304K
LE9304SS
LSC501
LSC503
LSSI521
LSSI5212132E
LSSI5213121E
LSSI522
LSSI523
LSSI524
LSSI526
LSSI527
LSSI528
LSSI529
LSSI530
LSSI532
LSSI533
LSSI534
LSSI535
LSSI536
LSSI572
LTL1425
LTL1825
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
56
56
M
MAD0608030PER5
MAD0608030R5
MAD0801230PER5
MAD0801230R5
MAD1001030PER5
MAD1001030R5
MAD1201030PER5
MAD1201030R5
MAD1401030PER5
MAD1401030R5
MAS0202015PER5
MAS0202015R5
MAS0252015PER5
MAS0252015R5
MAS0252515PER5
MAS0252515R5
MAS0302515PER5
MAS0302515R5
MAS0302521PER5
MAS0302521R5
17
17
17
17
17
17
17
17
17
17
14
13
14
13
14
13
14
13
14
13
MAS0303015PER5
MAS0303015R5
MAS0303021PER5
MAS0303021R5
MAS0352515PER5
MAS0352515R5
MAS0403015PER5
MAS0403015R5
MAS0403021PER5
MAS0403021R5
MAS0404021PER5
MAS0404021R5
MAS0405021PER5
MAS0405021R5
MAS0406021PER5
MAS0406021R5
MAS0503021PER5
MAS0503021R5
MAS0504015PER5
MAS0504015R5
MAS0504021PER5
MAS0504021R5
MAS0504026PER5
MAS0504026R5
MAS0504030PER5
MAS0504030R5
MAS0505021PER5
MAS0505021R5
MAS0505030PER5
MAS0505030R5
MAS0604015PER5
MAS0604015R5
MAS0604021PER5
MAS0604021R5
MAS0604026PER5
MAS0604026R5
MAS0604030PER5
MAS0604030R5
MAS0605015PER5
MAS0605015R5
MAS0605021PER5
MAS0605021R5
MAS0605026PER5
MAS0605026R5
MAS0605030PER5
MAS0605030R5
MAS0606021PER5
MAS0606021R5
MAS0606030PER5
MAS0606030R5
MAS0606040PER5
MAS0606040R5
MAS0608030PER5
MAS0608030R5
MAS0705021PER5
MAS0705021R5
MAS0705026PER5
MAS0705026R5
MAS0804030PER5
Index
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
69
Index
ELDON CS
MAS0804030R5
MAS0806021PER5
MAS0806021R5
MAS0806026PER5
MAS0806026R5
MAS0806030PER5
MAS0806030R5
MAS0806040PER5
MAS0806040R5
MAS0808021PER5
MAS0808021R5
MAS0808030PER5
MAS0808030R5
MAS0808040PER5
MAS0808040R5
MAS1006026PER5
MAS1006026R5
MAS1006030PER5
MAS1006030R5
MAS1008026PER5
MAS1008026R5
MAS1008030PER5
MAS1008030R5
MAS1008040PER5
MAS1008040R5
MAS1206030PER5
MAS1206030R5
MAS1208030PER5
MAS1208030R5
MAS1208040PER5
MAS1208040R5
MCD18085R5
MCD18104R5
MCD18105R5
MCD18124R5
MCD18125R5
MCD18126R5
MCD20085R5
MCD20104R5
MCD20105R5
MCD20106R5
MCD20108R5
MCD20124R5
MCD20125R5
MCD20126R5
MCD20128R5
MCD22106R5
MCD22126R5
MCDS18105
MCDS18125
MCDS20126
MCM16066
MCM16068
MCS18044R5
MCS18045R5
MCS18046R5
MCS18055R5
MCS18064R5
MCS18065R5
70
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
14
13
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
45
45
45
65
65
35
35
35
35
35
35
MCS18066R5
MCS18084R5
MCS18085R5
MCS18086R5
MCS18104R5
MCS18105R5
MCS18106R5
MCS20044R5
MCS20045R5
MCS20046R5
MCS20048R5
MCS20055R5
MCS20064R5
MCS20065R5
MCS20066R5
MCS20068R5
MCS20084R5
MCS20085R5
MCS20086R5
MCS20088R5
MCS20104R5
MCS20105R5
MCS20106R5
MCS20108R5
MCS22066R5
MCS22068R5
MCS22086R5
MCS22088R5
MCSS18065
MCSS18085
MCSS18105
MCSS20066
MCSS20086
MCSS20106
MP1606
MP1608
MP1610
MP1612
MP1804
MP1805
MP1806
MP1808
MP1810
MP1812
MP1816
MP2004
MP2005
MP2006
MP2008
MP2010
MP2012
MP2016
MP2206
MP2208
MP2210
MP2212
MPA04
MPC061R5
MPC062R5
Index
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
43
43
43
43
43
43
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
51
52
61
61
MPC063R5
MPC081R5
MPC082R5
MPC083R5
MPC101R5
MPC102R5
MPC103R5
MPC121R5
MPC122R5
MPC123R5
MPC161R5
MPC162R5
MPC163R5
MPD02
MPF1800
MPF2000
MPF2200
MPG06R5
MPG08R5
MPG10R5
MPG12R5
MPG16R5
61
61
61
61
61
61
61
61
61
61
61
61
61
52
52
52
52
59
59
59
59
59
P
PF1040
PF1050
PF1060
PF1080
PF1100
PF1120
PF2040
PF2050
PF2060
PF2080
PF2100
PF2120
PFS1060
PFS1080
PFS1100
PFS1120
PFS2060
PFS2080
PFS2100
PFS2120
PS1040
PS1050
PS1060
PS1080
PS2040
PS2050
PS2060
PS2080
PSS1040
PSS1050
PSS1060
PSS2040
PSS2050
PSS2060
47
47
47
47
47
47
47
47
47
47
47
47
48
48
48
48
48
48
48
48
47
47
47
47
47
47
47
47
48
48
48
48
48
48
S
SPM1106R5
SPM1406R5
SPM1606R5
SPM1804R5
SPM1805R5
SPM1806R5
SPM1808R5
SPM2004R5
SPM2005R5
SPM2006R5
SPM2008R5
SPM2206R5
SPM2208R5
SPMS1805
SPMS2006
STB151508
STB151512
STB153008
STB153012
STB202008
STB202012
STB203008
STB203012
STB204008
STB204012
STB205012
STB206012
STB208012
STB303008
STB303012
STB304012
STB305012
STB306012
STB404012
STB406012
STB408012
STBH02
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
28
Visit our website at www.eldon.com
Enclosure solutions for you. Eldon strives to satisfy a broad spectrum of industrial and real estate customers with
a comprehensive range of standard and customized enclosure solutions for power and distribution, machines, and
automation and control applications. We work hard for each and all of our customers by listening and responding to
their requirements. Read more on www.eldon.com
ELDON CS Enclosures Pvt. Ltd.
A1 / 285 / 1, GIDC, Umbergaon, Dist – Valsad, Gujarat,
PIN: 396171 INDIA
Tel: +91- 260 - 6532 709, 2562 062 | Tel / Fax : +91 - 260 - 2562 714
E-mail: sales@eldoncs.in | Website: www.eldon.com
India General Catalogue, version 1.0 EN, August 2013.
© Eldon Holding. All rights reserved.