72718 US Clamping Cover.qxd:Layout 2
23/10/07
11:00
Page 2
CLAMPING PRODUCTS
BRAUER CLAMPS USA
www.brauerclampsusa.com
BRAUER
H150/2B
H250/2B
H75/2B
V250/2B
V150/2B
COMPETITION
217U
227U
213U
207U
202U
“EXAMPLE” CROSS OVER CHART
No Guard
Full Excel Cross-over chart available from
web: www.brauerclampsusa.com or by email: sales@brauerclampsusa.com
25269 Mound Road Warren,
Michigan USA 48091
Tel: (586) 427-5304
Fax: (586) 427-5305
sales@brauerclampsusa.com
www.brauerclampsusa.com
THE COMPETITION
BRAUER CLAMPS USA INC
Watch out for sticking
points
Interchangeable hole patterns with
all major makes of clamps, on both
horizontal and vertical ranges.
Semi tubular rivets often
crack with frequent use
Smooth
handle often
causing slips
Interchangeable hole patterns
with competition
Smooth action geometry
Ergonomic
handle for
positive grips
11:00
THE COMPETITION
No Sticking
points
23/10/07
Often supplied
without
spindles
Guarded sides, prevent
finger trap
Supplied with spindle
Solid stainless
spun rivet for
longer life
72718 US Clamping Cover.qxd:Layout 2
Page IFC1
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
10:53
Page 1
25269 MOUND ROAD WARREN MICHIGAN USA 48091
TELEPHONE: (586) 427-5304 FAX: (586) 427-5305 E-MAIL: sales@brauerclampsusa.com
www.brauerclampsusa.com
www.brauer.co.uk
CAD FORMATS FOR BRAUER CLAMPS
The Brauer range of clamping products are available for design engineers in a number of CAD formats direct from:
www.brauerclampsusa.com.
3D:
• AutoCad (dwg)
• MDT (dwg)
• ACIS (.sat)
• STEP
• Iges
• PARACAD
• Catia v4
• Unigraphics
• Catia v5
• & in many more packages
Web Home Page
SPECIAL OR CUSTOM MADE PRODUCTS
If none of the standard products shown in this catalogue meets your
needs, our engineers are available to modify a standard clamp or to
work with you in developing a design to suit your need.
COMMITTED TO: • QUALITY • INNOVATION • SERVICE
BRAUER CLAMPING PRODUCTS ARE MANUFACTURED IN MILTON KEYNES, ENGLAND
© HMC Brauer • The mark ‘BRAUER’ is a registered trade mark of HMC Brauer.
The ‘Orange Grip’ is a registered trade mark of HMC Brauer. No part of this publication may be reproduced in any form (including photocopying or storing
in any medium by electronic means) without the written permission of HMC Brauer. HMC Brauer reserves the right to change the design or specification of
the products shown in this catalogue without prior notification.
1
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
10:53
Page 2
TABLE OF CONTENTS
TABLE OF CONTENTS
2-3
INTRODUCTION
4
TECHNICAL INFORMATION
5
INDEX
HEAVY-DUTY & LONG-HANDLED PUSH-PULL CLAMPS
P600, P600L
P1200, P1200L
P2500, P2500L
P5000, P5000L
31
ACCESSORIES
17
17
17
17
17
18, 22 & 25-30
Clamp Levers
29-30
Flanged Washers
26
Front Mounting
Brackets
26
Mounting Brackets
26
Neoprene Setscrew
Covers
28
Neoprene
Spindle Pads
28
Neoprene Tipped
Spindles
27
P Series Base
Accessory
18
Plain Spindles
27
Plastic Grips
Plastic Spindle
Covers
Setscrews
Spindle Retainers
Stroke Sensing Kit
Swivel Foot Spindles
VA Series Base
Accessory
VA Series Grip
VA Series Handle
VA S and T Series
Arm Accessory
HEAVY-DUTY PNEUMATIC TOGGLE CLAMPS
VA300BX
VA700CX
VA1200CX
VA2400CX
PC25.0
PC35.0
PC40.0
20
20
20
20
26
25
25
25
VA300/1B, VA3002B
VA300/2BT
VA700/1A
VA700/2C
10
10
10
20
28
27
28
22
27
HEAVY-DUTY VERTICAL CLAMPS
BODY & PIN LOCATION CLAMPS
BC25.0
BC40.0
25
10
10
10
11-13
12
11
13
13
VA1200/1A
VA1200/2C
VA2400/1A
VA2400/2C
13
13
13
13
HOOK CLAMPS
CAM PUSH/CAM PULL CLAMPS
22
22
22
22
HEAVY-DUTY CAM CLAMPS
HORIZONTAL CLAMPS
23
23
23
23
CR5000
CS300
CS800
CS1200
23
23
23
23
11-12
11
11
12
VA1200S, VA1200T
VA1200TD
VA2400S, VA2400T
14
15
14
15
14
14
15
14
13
H250/2A, H250/2AL
H250/1B, H250/2B
H300/2B
H350/1A
H350/2A
H350/1B, H350/2B
H450/1A
H450/2A
H450/1B, H450/2B
H700
LATCH CLAMPS - HORIZONTAL & VERTICAL
11
12
11
SS = Stainless steel version
2
16
16
16
13-15
H50/1B, H50/2B
H50/2BSS
H50/2C
H75/1B, H75/1BSS,
H75/2B, H75/2BSS
H75/1C, H75/2C
H100/2B
H150/1B, H150/1BSS,
H150/2B, H150/2BSS
H150/1C, H150/2C
H200/2B
H250/1A, H250/1AL
23
HEAVY-DUTY CLAMP MECHINISMS
VA300S,VA3002S
VA300T
VA700S, VA700T
VA700TD
LH200, LH200SS
LH400, LH400SS
LH700, LH700SS
22
CP1005
CP1006
CP1007
CP1008
CP1500, CP1500L
CP2000, CP2000L
CP3000, CP3000L
CR4000
16
LU200H, LU200HSS
LU400H, LU400HSS
LU700H, LU700HSS
LU2000H
LU4000H
14
14
14
13
14
14
13
14
14
14
16
16
16
16
16
16
LU200V, LU200VSS
LU400V, LU400VSS
LU700V, LU700VSS
16
16
16
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
10:53
PNEUMATIC POWER CLAMPS
19
BPC 25
BPC 32
PNEUMATIC SWING CLAMPS
PNS32-10A,
PNS32-10C
PNS40-20A
PNS40-20C
20
20
PNS50-20A,
PNS50-20C
PNS63-20A,
PNS63-20C
20
20
20
20
P600X
P1200X
P2500X
PNEUMATIC VERTICAL SLIM-LINE TOGGLE CLAMPS
V100VX
V200VX
V300VX
POSITIVE LOCKING CLAMPS
PULL-BACK CLAMPS
17
17
17
17
17
17
17
P550
P750
P1150, P1150L
P2250, P2250L
SP700
SWING CLAMPS & SWING CLAMP ASSEMBLIES
1015-08
1015-10
1015-12
1015-16
20
24
24
24
24
1016-08
1016-10
1016-12
1016-16
TOGGLE PRESSES – MANUAL, PNEUMATIC & RACK & PINION
20
20
20
P600PR
P1200PR
P2500PR
P600XPR
P1200XPR
P2500XPR
PNPR1
19
21
21
21
21
21
21
21
PNDP1
RPP1
RPP2
TPR1
TPR2
TPR3
VERTICAL CAM CLAMPS
CV75
CV250
CV350
VERTICAL CLAMPS
9
15
24
24
24
24
24
24
21
21
21
21
21
21
21
8
19
19
19
9
17
17
18
18
18
24
20
24
TC79
TC345
17-18
P50, P50SS
P100, P100SS
P200, P200SS
P250
P350
P400, P400SS
P450
20
9 & 15
V250/1BLC,
V250/2BLC,
V250/3BLC
V350/1BLC,
V350/2BLC
H350/1BLC,
H350/2BLC
PUSH-PULL CLAMPS
19
19
20
PNEUMATIC VERTICAL & PUSH-PULL CLAMPS
V75X
V150X
V250X
V450X
Page 3
8
8
8
6-9
V70/2BT, V70/2BTSS
V75/1B,
V75/2B, V75/2BSS
V100/1B, V100/1C
V100/2B, V100/2C
V100/3B, V100/3C
V150/1B,V150/1BSS,
V150/1BL, V150/1C
V150/2B, V150/2BSS,
V150/2BL, V150/2C
V200/1B, V200/1C
V200/2B, V200/2C
V200/3B, V200/3C
V250/1A, V250/1AL,
V250/1B, V250/1BSS,
V250/1C
V250/2A, V250/2AL,
V250/2B,V250/2BSS
V250/2C
9
6
7
6
7
8
6
7
6
7
8
6
V300/1A, V300/1B,
V300/1C
V300/3A, V300/3B
V300/3C
V350/1A, V350/1B,
V350/1C
V350/2A, V350/2B,
V350/2C
V450/1A, V450/1B,
V450/1C
V450/2A, V450/2B,
V450/2C
V550/1A, V550/1B,
V550/1C
V550/2A, V550/2B,
V550/2C
6
8
6
7
6
7
6
7
7
SS = Stainless steel version
3
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
10:53
Page 4
INTRODUCTION
Since 1926, Brauer has been providing industry with the finest
quality products, expert technical support, on time deliveries and
unparalleled customer service. Our brands are now recognized
world-wide as products of the highest quality, and the breadth
of our product portfolio provides our customers with tooling
solutions for a wide variety of problems.
Brauer continues to be committed to bringing new innovative tooling
products to the market place. This new clamping products catalog
updates our long standing, and successful range of clamping
products which have led the market for over 50 years.
Our team of highly talented engineers is backed by the latest
computer aided design facilities including three dimensional feature
based parametric solid modelling.
At Brauer, we continue to be motivated by working with our
customers in providing innovative solutions for their particular tooling
requirements.
To view the complete tooling portfolio manufactured by Brauer,
please consult our web site at www.brauerclampsusa.com or
www.brauer.co.uk.
If, after considering our standard range of products, you are unable
to find a solution, then please consult our sales team who will be
pleased to progress the design and manufacture of a custom
designed item to meet your particular needs.
4
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
10:53
Page 5
TECHNICAL INFORMATION
A
The toggle mechanism in a clamp has three functions:
1. to multiply a hand force at the handle into a high
clamping force to hold work.
2. to create an over-centre lock to prevent the clamp
from opening and releasing the work until opened by
the operator.
B
Link
angle
3. to rapidly open and close the clamp giving a wide
clearance in which to load and unload the workpiece.
Clamping
force
The multiplication of input (hand) force to output
(clamping) force is created firstly by the leverage of
handle length (A) to link length (B), and secondly by the
three pivots of the toggle being pushed into alignment.
Overcentre
dimension
For example, a clamp with a handle to link leverage of 3
can multiply its hand force to clamping force as follows:
link
angle
Hand force
A
handle
overall
leverage
force
multiplier
multiplier
2.0˚
14
3
42
1.0˚
28
3
84
0.5˚
57
3
171
0.25˚
114
3
342
0.12˚
342
3
1026
0.0˚ infinity - limited by the elasticity of the clamp
Hand force
toggle
multiplier
Overcentre
dimension
Link
angle
The model numbering system describes the clamp type
and strength as shown in the example below:
Clamping
force
V
350 / 2
B
V = vertical
CLAMP SERIES H = horizontal
P = straight line (push-pull) action
HOLDING FORCE = (for ibs x 2.2)
BASE TYPE
/1 = straight
/2 = flanged
/3 = front mounting
ARM TYPE
A = straight
B = adjustable spindle position
C = fixed spindle position
Note: an ‘X’ within the model number denotes a pneumatic clamp
Clamping Force — is that which will result from the
quoted Hand Force. Clamps with a fixed clamping
position have a single Clamping Force quoted. Those
where the threaded spindle may be positioned at any
point along an arm (arm type B) and those with solid
arms to be cut and welded as required (arm type A)
have clamping forces quoted at the inner and outer
ends of the arm.
Holding Force — is that which the clamp can withstand
after being closed without damage to the clamp and
without the toggle unlocking due to distortion of the
clamp.
Hand
force
(lbs)
Holding
force
(lbs)
The overcentre dimension is carefully chosen in relation
to the elasticity of the clamp to maximise clamping force
while ensuring that the clamp locks closed even under
vibration or intermittent loading.
Hand Force — has been chosen as being that which
might be applied in frequent operation.
Forces are given in lbs.
Clamping
force
(lbs)
5
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
10:53
Page 6
Vertical Clamps — Straight Base, Solid Arm Type
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel protection
● 2 position adjustable arm opening
● Spindle retainer supplied loose for welding in the desired position
● See “Accessories” for other items
●
●
A
F
J
B
Model #
V250/1A
V250/1AL
V300/1A
V350/1A
V450/1A
V550/1A
G
I
H
D
C
E
A
413⁄16
513⁄64
55⁄8
57⁄8
72⁄32
91⁄4
B
715⁄32
715⁄32
715⁄16
97⁄16
921⁄32
137⁄8
Dimensions (in.)
C
D
E
31⁄32 5⁄16 13⁄8
31⁄32 5⁄16 13⁄8
329⁄32 11⁄32 111⁄16
355⁄64 11⁄32 11⁄4
3
9
5
⁄8
⁄16
617⁄64 1⁄2
2
F
7
⁄8
7
⁄8
31
⁄32
13⁄16
17⁄16
11⁄2
G
H ØI
117⁄32 1⁄4 9⁄32
117⁄32 1⁄4 9⁄32
15⁄8 1⁄4 5⁄16
24⁄32 5⁄16 21⁄64
25⁄16 25⁄64 11⁄32
45⁄32 25⁄64 31⁄64
J
M8x60
M8x60
M8x60
M10x60
M12x100
M16x150
Holding
Force
Weight
551lbs
551lbs
660lbs
772lbs
992lbs
1212lbs
10oz
10.2oz
1lb 1oz
1lb 9oz
2lb 9oz
4lb 10oz
Vertical Clamps — Straight Base, Adjustable Arm Type
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel protection
● 2 position adjustable arm opening
● See “Accessories” for other items
●
●
A
F
Dimensions (in.)
Model #
A
B
C
D E
F
1
3
43
V75/1B
2 ⁄4 4 ⁄16
17⁄32 13⁄64 5⁄8
⁄64
9
3
1
5
1
9
V100/1B 2 ⁄16 4 ⁄8
1 ⁄2
⁄4
⁄16- ⁄8 11⁄16
3
5
11
9
1
15
V150/1B 2 ⁄4 5 ⁄16 1 ⁄16 ⁄32 ⁄2
⁄16
15
V150/1BSS 23⁄4 55⁄16 111⁄16 9⁄32 1⁄2
⁄16
11
5
11
9
1
15
V150/1BL 3 ⁄32 5 ⁄16 1 ⁄16 ⁄32 ⁄2
⁄16
V200/1B 31⁄16 57⁄8
123⁄32 5⁄16 1⁄2-3⁄4 53⁄64
29
V250/1B 45⁄16 71⁄2
215⁄16 5⁄16 3⁄4
⁄32
29
V250/1BSS 45⁄16 71⁄2
215⁄16 5⁄16 3⁄4
⁄32
23
63
63
9
7
V300/1B 5 ⁄16 8
3 ⁄8
⁄64 ⁄64
⁄64
11
3
7
3
1
V350/1B 5 ⁄4 9 ⁄16 3 ⁄4
⁄32 1 ⁄4 13⁄16
13
7
11
13
1
V450/1B 6 ⁄8 9 ⁄16 4 ⁄16
⁄32 1 ⁄4 115⁄32
1
V550/1B 91⁄4 1319⁄32 61⁄4
⁄2 2
11⁄2
SS = stainless steel version
J
B
G
H
D
I
E
C
G
H ØI
7
5
⁄8
⁄32 11⁄64
1
1 ⁄16 3⁄16 3⁄16
13⁄32 1⁄4 13⁄64
13⁄32 1⁄4 13⁄64
13⁄32 1⁄4 13⁄64
115⁄32 1⁄4 7⁄32
117⁄32 1⁄4 9⁄32
117⁄32 1⁄4 9⁄32
121⁄32 1⁄4 5⁄16
21⁄8 5⁄16 21⁄64
25⁄16 25⁄64 11⁄32
41⁄32 25⁄64 31⁄64
J
M5
M5
M6
M6
M6
M6x50
M8x60
M8x60
M8x60
M10x80
M12x100
M16x150
Holding
Force
Weight
165lbs
220lbs
330lbs
330lbs
330lbs
441lbs
551lbs
551lbs
660lbs
772lbs
992lbs
1212lbs
1.3oz
2.6oz
4oz
4oz
4.3oz
5.3oz
10oz
10oz
1lb 1oz
1lb 9oz
3lbs
5lb 4oz
Vertical Clamps — Straight Base, Fixed Spindle Position
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel protection
● 2 position adjustable arm opening
● See “Accessories” for other items
●
●
A
F
J
B
G
H
D
C
6
E
I
Model #
V100/1C
V150/1C
V200/1C
V250/1C
V300/1C
V350/1C
V450/1C
V550/1C
A
B
29⁄16 413⁄32
23⁄8
55⁄16
31⁄32 57⁄8
7
3 ⁄16 715⁄32
41⁄2
8
47⁄8
97⁄16
13
5 ⁄32 911⁄16
723⁄32 1319⁄32
Dimensions (in.)
C
D
E
F
117⁄64 15⁄64 9⁄16-5⁄8 11⁄16
15
11⁄32 9⁄32 1⁄2
⁄16
5
xx
⁄16 1⁄2-3⁄4 53⁄64
25
5
3
29
1 ⁄32 ⁄16
⁄4
⁄32
29⁄16 23⁄64 63⁄64 63⁄64
9
11
1
2 ⁄16
⁄32 1 ⁄4 13⁄16
229⁄32 13⁄32 11⁄4 115⁄32
41⁄4 1⁄2
2
11⁄2
G
H
11⁄16 13⁄64
13⁄32 1⁄4
115⁄32 1⁄4
115⁄32 1⁄4
117⁄32 1⁄4
21⁄16 5⁄16
21⁄4 25⁄64
315⁄16 25⁄64
ØI
3
⁄16
13
⁄64
7
⁄32
9
⁄32
8
⁄16
21
⁄64
11
⁄32
31
⁄64
J
M5
M6
M6x50
Mx60
M8x60
M10x80
M12x100
M16x150
Holding
Force
Weight
220lbs
330lbs
441lbs
551lbs
660lbs
772lbs
992lbs
1212lbs
2.6oz
4oz
5.3oz
10oz
1lb 1oz
1lb 8oz
2lb 10oz
5lb 1oz
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
10:53
Page 7
Vertical Clamps — Flanged Base, Solid Arm Type
A
H
F
E
D
I
B
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel protection
● Spindle retainer supplied loose for welding in the desired position
● Front mounting bracket available see “Accessories”
● See “Accessories” for other items
●
●
Model #
V250/2A
V250/2AL
V300/2A
V350/2A
V450/2A
V550/2A
G
C
A
43⁄8
425⁄32
55⁄8
57⁄8
71⁄16
99⁄32
B
67⁄8
67⁄8
75⁄16
97⁄16
9
129⁄32
Dimensions (in.)
C
D
E
F
31⁄32 5⁄16 3⁄4
11⁄4
3
5
3
3 ⁄16 ⁄16
⁄4
11⁄4
315⁄16 11⁄32 7⁄8
111⁄32
327⁄32 11⁄32 11⁄4 125⁄32
25
5
⁄64 11⁄4 125⁄32
51⁄4 1⁄2
21⁄4 23⁄4
G
11⁄4
11⁄4
111⁄32
111⁄16
2
37⁄32
ØH
9
⁄32
9
⁄32
5
⁄16
21
⁄64
11
⁄32
31
⁄64
I
M8x60
M8x60
M8x60
M10x80
M12x100
M16x150
Holding
Force
Weight
551lbs
551lbs
661lbs
772lbs
992lbs
1212lbs
10oz
10.2oz
1lb 1oz
1lb 9oz
2lb 9oz
4lb 10oz
Vertical Clamps — Flanged Base, Adjustable Arm Type
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel protection
● Some models also available in Stainless Steel
● Front mounting bracket available see “Accessories”
● See “Accessories” for other items
●
●
A
F
E
D
Dimensions (in.)
Model #
A
B
C
D
E
1
7
5
V75/2B
2 ⁄4
3 ⁄8 17⁄32 13⁄64
⁄8
5
V75/2BSS 21⁄4
37⁄8 17⁄32 13⁄64
⁄8
5
1
7
15
9
V100/2B 2 ⁄8
4 ⁄16 1 ⁄32
⁄64 ⁄16-5⁄8
3
7
7
9
1
V150/2B 2 ⁄4
4 ⁄8 1 ⁄32 ⁄32
⁄2
1
V150/2BSS 23⁄4
47⁄8 111⁄16 9⁄32
⁄2
1
V150/2BL 311⁄32 47⁄8 113⁄16 9⁄32
⁄2
V200/2B 31⁄16 55⁄16 111⁄16 5⁄16 1⁄2-3⁄4
3
V250/2B 41⁄4
67⁄8 215⁄16 5⁄16
⁄4
3
V250/2BSS 41⁄4
67⁄8 215⁄16 5⁄16
⁄4
3 63
5
5
23
V300/2B 5 ⁄8
7 ⁄16 4
⁄64 ⁄4- ⁄64
11
3
5
3
1
V350/2B 5 ⁄4
8 ⁄8 3 ⁄4
⁄32 1 ⁄4
V450/2B 7
9
451⁄64 25⁄64 11⁄4
1
3
1
1
V550/2B 9 ⁄32 12 ⁄4 6 ⁄16 ⁄2
2
SS = stainless steel version
I
B
G
C
F
⁄16
15
⁄16
11
⁄16-15⁄16
11⁄16
11⁄16
11⁄16
63
⁄64-11⁄16
11⁄4
11⁄4
123⁄64
125⁄32
125⁄32
23⁄4
15
G
ØH
11
⁄8
⁄64
5
11
⁄8
⁄64
7
3
⁄8
⁄16
29
13
⁄32
⁄64
29
⁄32 13⁄64
29
⁄32 13⁄64
15⁄32 7⁄32
11⁄4 9⁄32
11⁄4 9⁄32
111⁄32 5⁄16
111⁄16 21⁄64
11
2
⁄32
37⁄32 31⁄64
5
I
M5
M5
M5
M6
M6
M6
M6x50
M8x60
M8x60
M8x60
M10x80
M12x100
M16x150
Holding
Force
Weight
165lbs
165lbs
220lbs
330lbs
330lbs
330lbs
441lbs
551lbs
551lbs
661lbs
772lbs
992lbs
1212lbs
1.3oz
1.3oz
2.6o
4oz
4oz
4.3oz
5.3oz
10oz
10oz
1lb 1oz
1lb 9oz
2lb 9oz
5lb 4oz
Vertical Clamps — Flanged Base, Fixed Spindle Position
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel protection
● Front mounting bracket available see “Accessories”
● See “Accessories” for other items
●
●
A
F
E
D
I
B
G
C
Model #
V100/2C
V150/2C
V200/2C
V250/2C
V300/2C
V350/2C
V450/2C
V550/2C
A
29⁄16
223⁄64
31⁄32
315⁄32
41⁄2
47⁄8
513⁄32
73⁄4
B
41⁄16
47⁄8
55⁄16
67⁄8
75⁄16
821⁄32
831⁄32
129⁄32
Dimensions (in.)
C
D
E
117⁄64 15⁄64 9⁄16-5⁄8
9
1
1 ⁄32 ⁄32 1⁄2
13⁄8 5⁄16 1⁄2-3⁄4
23⁄32 5⁄16 3⁄4
29⁄16 23⁄64 3⁄4-63⁄64
29⁄16 7⁄8
11⁄4
229⁄32 13⁄32 11⁄4
41⁄4 1⁄2
2
F
⁄16-15⁄16
11⁄16
63
⁄64-11⁄16
11⁄4
123⁄64
125⁄32
125⁄32
23⁄4
11
G
7
⁄8
29
⁄32
15⁄32
11⁄4
11⁄4
15⁄8
15⁄16
37⁄32
H
3
⁄16
13
⁄64
7
⁄32
9
⁄32
5
⁄16
21
⁄64
11
⁄32
31
⁄64
I
M5
M6
M6x50
M8x60
M8x60
M10x80
M12x100
M16x150
Holding
Force
Weight
220lbs
330lbs
441lbs
551lbs
661lbs
772lbs
992lbs
1212lbs
2.6oz
4oz
5.3oz
10oz
1lb 1oz
1lb 8oz
2lb 10oz
5lb 1oz
7
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
14:04
Page 8
Cam Clamps — Vertical Standard Design
Clamping force generated by the action of a roller on a cam
Ideal for clamping components of different thicknesses without readjustment of the
clamping spindle
● Complete with cushioned PVC handle grip
● See “Accessories” for other items
●
●
Model #
CV75
CV250
CV350
A
23⁄64
27⁄8
49⁄16
B
37⁄8
67⁄8
85⁄8
Dimensions (in.)
C
D
E
F
7
3
15
⁄8
⁄16 5⁄8
⁄16
11⁄4 5⁄16 3⁄4
11⁄4
11
3
1
2 ⁄8
⁄32 1 ⁄4 13⁄4
G
5
⁄8
13⁄16
121⁄32
ØH
5
⁄32
9
⁄32
21
⁄64
I
M5x35
M8x60
M10x80
Holding
Force
Weight
165lbs
550lbs
770lbs
1.3oz
9oz
1lb 6oz
Vertical Clamps — Front mounted, Solid Arm
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel
● Unique one piece front mounting configuration
● Stainless steel solid axle pins
● Spindle and retainer supplied loose for welding in the desired position
● See “Accessories” for other items
●
A
●
I
B
G
D E
H
Model #
V300/3A
C
F
A
55⁄8
B
91⁄4
Dimensions (in.)
C
D
E
321⁄32 3⁄4
13⁄8
F
13⁄8
G
17⁄32
ØH
17
⁄64
I
M8x60
Holding
Force
Weight
661lbs
13oz
Vertical Clamps — Front mounted, Adjustable Arm
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel
● Unique one piece front mounting configuration
● Stainless steel solid axle pins
● See “Accessories” for other items
●
●
A
I
B
G
Model #
V100/3B
V200/3B
V300/3B
D E
H
C
F
A
25⁄8
31⁄8
55⁄8
B
413⁄16
611⁄16
91⁄4
Dimensions (in.)
C
D
E
9
XX
⁄32 9⁄16
15⁄32 5⁄16 11⁄32
321⁄32 3⁄4
13⁄8
F
13⁄32
11⁄32
13⁄8
G
⁄32
217⁄32
17⁄32
19
ØH
⁄16
7
⁄32
17
⁄64
3
I
M5
M6x50
M6x60
Holding
Force
Weight
220lbs
441lbs
661lbs
2.9oz
6.6oz
13oz
Vertical Clamps — Front mounted, Fixed Spindle Position
Axles are solid stainless steel and run in precision bushes
Precision geometry for smooth action
● Complete with cushioned PVC handle grip
● Extendible base to guide the clamping arm
● Removable stop pin which allows clamp arm to open to greater clearance angles
● Zinc-plated and passivated steel
● Unique one piece front mounting configuration
● Stainless steel solid axle pins
● See “Accessories” for other items
●
A
I
B
●
G
D
H
8
F
E
C
Model #
V100/3C
V200/3C
V300/3C
A
29⁄16
31⁄32
41⁄2
B
413⁄16
611⁄16
91⁄4
Dimensions (in.)
C
D
E
31
11
⁄32
⁄16 9⁄16
11⁄16 5⁄16
11⁄32
29⁄32 3⁄4
13⁄8
F
13⁄32
121⁄32
13⁄8
G
⁄32
15⁄32
13⁄16
19
ØH
⁄16
7
⁄32
17
⁄64
3
I
M5
M6x50
M8x60
Holding
Force
Weight
220lbs
441lbs
661lbs
2.9oz
6.6oz
13oz
72718 US Clamping 1-9.qxd:Layout 2
23/10/07
10:54
Page 9
Vertical Positive Locking Clamps — Straight Base, Adjustable Spindle Type
For use in turnover work holding fixtures
Complete with cushioned PVC handle grip
● Zinc-plated and passivated steel-plating protection
● Stainless steel solid axles
● Positive mechanical bar lock
● See “Accessories” for other items
●
●
F
B
J
G
Model #
A
V250/1BLC 51⁄2
V350/1BLC 51⁄2
I
C
D
E
Dimensions (in.)
B
C
D
E
F
5
821⁄32 21⁄4 9⁄32 5⁄8
⁄16
27
921⁄32 313⁄32 1⁄2
⁄32 3⁄8
G
17⁄8
217⁄32
H
7
⁄32
5
⁄16
ØI
19
⁄64
19
⁄32
J
8mm
10mm
G
15⁄16
15⁄8
ØH
19
⁄64
21
⁄64
I
8mm
10mm
G
225⁄32
ØH
1
⁄4
I
8mm
Holding
Force
Weight
550lbs
770lbs
1.04lbs
1.52lbs
H
A
Vertical Positive Locking Clamps — Flanged Base, Adjustable Spindle Type
For use in turnover work holding fixtures
Complete with cushioned PVC handle grip
● All models have closed ends for rigidity
● Zinc-plated and passivated steel-plating protection
● Stainless steel solid axles
● Positive mechanical bar lock
● Front mounting bracket available see “Accessories”
● See “Accessories” for other items
●
●
B
I
G
C
H
A
D
Model #
A
V250/2BLC 327⁄32
V350/2BLC 517⁄32
E
B
83⁄32
91⁄32
Dimensions (in.)
C
D
E
217⁄32 9⁄32 25⁄32
329⁄32 1⁄2
11⁄4
F
11⁄4
149⁄64
Holding
Force
Weight
550lbs
770lbs
1.04lbs
1.76lbs
F
Vertical Positive Locking Clamps — Front mounted, Adjustable Spindle Type
For use in turnover work holding fixtures
Complete with cushioned PVC handle grip
● All models have closed ends for rigidity
● Zinc-plated and passivated steel-plating protection
● Stainless steel solid axles
● Positive mechanical bar lock
● See “Accessories” for other items
●
●
I
B
H
G
E
D
C
Model #
A
V250/3BLC 327⁄32
F
B
91⁄2
Dimensions (in.)
C
D
E
F
115⁄16 1⁄32 15⁄16
17⁄64
Holding
Force
Weight
550lbs
1.18lbs
Holding
Force
Weight
150lbs
150lbs
4oz
4oz
A
Mini Vertical Clamps — Flanged Base, Adjustable Arm
Used where height restrictions prevent use of a vertical clamp
with cushioned PVC handle grip
● All models have closed ends for rigidity
● Zinc-plated and passivated steel-plating protection
● Stainless steel solid axles
● Positive mechanical bar lock
● See “Accessories” for other items
●
E
D
● Complete
H
F
C
I
G
B
C
Model #
V70/2BT
V70/2BTSS
A
23⁄16
23⁄16
B
13⁄8
112⁄32
Dimensions (in.)
C
D
E
F
11⁄32 7⁄32 17⁄32
1
11⁄32 7⁄32 17⁄32
1
G
1
⁄2
1
⁄2
ØH
11
⁄64
11
⁄64
I
10-32
10-32
SS = stainless steel version
A
9
72718 US Clamping 10-17.qxd:Layout 2
23/10/07
10:51
Page 10
Pin Location Clamps
●
Metric dimensions shown for global specification.
Model #
A
B
C
D
Dimensions (mm)
E
F
G
H
I
J
K
L
M
PC25.0
PC35.0
PC40.0
25
35
40
347
370
371
105
105
105
51
51
51
49
49
49
15
15
15
157
157
157
51
74
74
181
181
181
P400
P400
P400
20
20
20
20
20
20
30
30
30
A
C
K
D
L
M
B
I
ØB (TYP)
M8 (TYP)
F
H
E
J
G
Body Location Clamps
●
Metric dimensions shown for global specification.
Model #
BC25.0
BC40.0
B
C
305 105
310 105
D
E
Dimensions (mm)
F
G
H
I
J
51
51
49
49
20
20
157 181
157 181
20
20
30
30
15
15
L
M
N
P400 37
P400 37
C
L
D
B
M
H
10
ØB (TYP)
M8 (TYP)
F
I
E
G
J
N
72718 US Clamping 10-17.qxd:Layout 2
23/10/07
10:51
Page 11
Heavy-Duty Vertical Clamp Mechanisms
Mechanism to add customer’s own handle, arm and base
Adaptable, durable and weldable
● Able to withstand abuse in heavy-duty applications
● Fully bushed assembly
● Side plate mounting for drilling and bolting into position
● See “Accessories” for other items
●
●
Model #
VA300T
VA700T
VA1200T
VA2400T
A
11⁄16
13⁄4
2
21⁄2
B
325⁄64
55⁄8
7
85⁄8
Dimensions (in.)
C
D
E
13⁄16
R13⁄32 15⁄16
137⁄64 R9⁄16 11⁄2
21⁄4
R3⁄4
21⁄8
215⁄16 R7⁄8
223⁄32
F
1
111⁄16
17⁄8
27⁄16
G
1
⁄4
13
⁄32
15
⁄32
5
⁄8
Holding
Force
Weight
660lbs
1543lbs
2646lbs
5291lbs
6oz
1lb 9oz
3lb 2oz
7lb 1oz
Heavy-Duty Clamp Mechanisms
Mechanism to add customer’s own handle, arm and base
Adaptable, durable and weldable
● Able to withstand abuse in heavy-duty applications
● Fully bushed assembly
● Flanged base for screwing or welding into position
● Weldable base
● See “Accessories” for other items
●
●
Model #
VA300S
VA700S
VA1200S
VA2400S
A
23
⁄32
11⁄8
115⁄32
21⁄32
B
219⁄32
415⁄32
515⁄32
615⁄16
C
13
⁄32
25
⁄32
13⁄32
19⁄32
Dimensions (in.)
D
E
F
111⁄16 7⁄32
1
3
11⁄4
⁄8
111⁄16
15
27
2 ⁄32
⁄32 17⁄8
39⁄16 5⁄8
27⁄16
G
R3⁄8
R17⁄32
R23⁄32
R27⁄32
Holding
Force
Weigh
660lbs
1543lbs
2646lbs
5291lbs
6oz
1lb 7oz
2lb 10oz
6lb 4oz
Heavy-Duty Clamp Mechanisms
H
D
Ø0.47
Mechanism to add customer’s own handle, arm and base
Adaptable, durable and weldable
● Able to withstand abuse in heavy-duty applications
● Fully bushed assembly
● Flanged base for screwing or welding into position
● Weldable base
● See “Accessories” for other items
●
C
●
Ø0.25
E
A
Arm opens thro 116°
R0.39
B
Handle opens
thro 88°
Model #
VA3002S
Dimensions (in.)
A
B
C
D
E
2.05 2.91 1.25 0.24 0.75
F
1.65
G
1.22
H
0.24
Holding
Force
Weight
660lbs
6oz
F
G
Heavy-Duty Vertical — Adjustable Spindle Position, Flange Base
Able to withstand abuse in heavy-duty applications
Adaptable, durable and weldable
● Fully bushed assembly
● See “Accessories” for other items
●
●
Model #
A
VA300/2BT 35⁄16
B
31⁄32
Dimensions (in.)
C
D
E
F
149⁄64 15⁄64 3⁄4
11⁄4
G
31
⁄32
I
M6x50
Holding
Force
Weight
660lbs
9oz
11
72718 US Clamping 10-17.qxd:Layout 2
23/10/07
10:51
Page 12
Heavy-Duty Special Vertical — Attachable Precision Drilled Arm, Straight Base
D
Able to withstand abuse in heavy-duty applications
Adaptable, durable and weldable
● Fully bushed assembly
● Side plate mounting for drilling and bolting into position
● See “Accessories” for other items
● Arm supplied separately (if required)
●
F
●
A
Dimensions (in.)
Model #
A
B
C
D
E
F
VA700TD
425⁄32 55⁄8 2.50 25⁄32 13⁄4 14⁄16
9
VA1200TD 6 ⁄64 7.0 3.0
1.0 2.0 17⁄8
Arm Part No. (if required)
C7D (VA700TD)
C12D (VA1200TD)
B
G
J
I
H
E
G
3.0
4.0
ØH
25
⁄64
15
⁄32
I
5
⁄16
25
⁄64
J
⁄64
⁄64
23
15
Holding
Force
Weight
1543lbs
2646lbs
2lbs 6oz
4lbs 2oz
C
Heavy-Duty Vertical — Adjustable Spindle Position, Straight Base
A
E
G
Able to withstand abuse in heavy-duty applications
Adaptable, durable and weldable
● Fully bushed assembly
● Side plate mounting for drilling and bolting into position
● See “Accessories” for other items
●
●
I
B
Model #
VA300/1B
F
D
A
35⁄16
B
511⁄32
Dimensions (in.)
C
D
E
F
G
15
149⁄64 1⁄4
⁄32 121⁄32 17⁄64
I
M6x50
Holding
Force
Weight
660lbs
9oz
C
Heavy-Duty Vertical with Flange Base — Adjustable Spindle Position
H
A
F
I
D
B
●
E
G
Model #
VA300/2B
C
12
Able to withstand abuse in heavy-duty applications
Adaptable, durable and weldable
● Fully bushed assembly
● See “Accessories” for other items
●
A
35⁄16
B
411⁄16
Dimensions (in.)
C
D
E F
149⁄64 15⁄64 3⁄4 117⁄64
Holding
G
⁄32
31
ØH
⁄64
17
I
Force
M6x50 660lbs
Weight
9oz
72718 US Clamping 10-17.qxd:Layout 2
23/10/07
10:52
Page 13
Heavy-Duty Vertical — Straight Arm for Welded Attachment, Straight Base
A
D
Able to withstand abuse in heavy-duty applications
Adaptable, durable and weldable
● Fully bushed assembly
● Side plate mounting for drilling and bolting into position
● Spindle retainer supplied loose for welding in the desired position
● See “Accessories” for other items
●
●
F
I
B
Model #
A
B
VA700/1A 43⁄32 91⁄4
VA1200/1A 47⁄8 107⁄8
VA2400/1A 63⁄8 121⁄2
G
H
C
Dimensions (in.)
C
D
E
F
G
H
I
Holding
Force
Weight
137⁄64
2
23⁄8
23⁄4
33⁄8
41⁄8
13
⁄32
15
⁄32
5
⁄8
M12x100
M12x100
M16x150
1543lbs
2646lbs
5286lbs
2lb 5oz
4lb 0oz
8lb 3oz
⁄32
15
⁄32
5
⁄8
13
125⁄32
131⁄32
5
⁄8
111⁄16
157⁄64
27⁄16
E
Heavy-Duty Vertical — Fixed Spindle Position, Flange Base
A
H
Able to withstand abuse in heavy-duty applications
Adaptable, durable and weldable
● Fully bushed assembly
● Complete with cushioned PVC handle grip
● See “Accessories” for other items
●
●
F
I
E
D
B
G
Model #
A
B
Dimensions (in.)
C
D
E
F
VA700/2C 47⁄8 87⁄16 2
VA1200/2C 55⁄8 97⁄8 23⁄8
VA2400/2C 73⁄8 115⁄8 231⁄32
⁄64
25
⁄
3
8
15
⁄32
⁄64 131⁄32
13⁄16 223⁄64
17⁄8 231⁄32
63
G
ØH
Holding
Force
I
17⁄8
29⁄32
23⁄4
M12x100 1543lbs
M12x100 2646lbs
M12x100 1543lbs
Weight
2lb 9oz
4lb 9oz
2lb 9oz
C
Horizontal Clamps — Straight Base, Solid Arm Type
Used where height restrictions prevent use of a vertical clamp
Complete with cushioned PVC handle grip
● All models have closed ends for rigidity
● Zinc-plated and passivated steel-plating protection
● Stainless steel solid axles
● Positive mechanical bar lock
● Spindle and retainer supplied loose for welding in the desired position
● See “Accessories” for other items
●
●
A
J
F
G
B
H
C
D
E
I
Model #
A
B
Dimensions (in.)
C
D E
F
G
H
I
J
Holding
Force
Weight
H250/1A
H250/1AL
H350/1A
H450/1A
87⁄8
91⁄4
11
123⁄16
37⁄32
37⁄32
41⁄4
53⁄32
37⁄32
39⁄16
49⁄32
123⁄16
129⁄32
129⁄32
21⁄2
33⁄32
7
⁄32
⁄32
5
⁄16
3
⁄8
17
7
17
⁄64
⁄64
⁄32
11
⁄32
M8x60
M8x60
M10x80
M12x100
550lbs
540lbs
770lbs
991lbs
⁄16
⁄16
11
⁄32
1
⁄2
5
5
28
1
⁄32
28
1
⁄32
19
1 ⁄32 15⁄32
9
1 ⁄32 115⁄32
11
1lb 1oz
1lb 2oz
1lb 11oz
3lb 6oz
13
72718 US Clamping 10-17.qxd:Layout 2
23/10/07
10:52
Page 14
Horizontal Clamps — Flanged Base, Solid Arm Type
Used where height restrictions prevent use of a vertical clamp
Complete with cushioned PVC handle grip
● All models have closed ends for rigidity
● Zinc-plated and passivated steel-plating protection
● Stainless steel solid axles
● Positive mechanical bar lock
● Spindle and retainer supplied loose for welding in the desired position
● See “Accessories” for other items
●
●
A
F
J
D
E
I
B
G
Model #
H250/2A
H250/2AL
H350/2A
H450/2A
C
A
87⁄8
917⁄64
1031⁄32
123⁄16
B
25⁄8
25⁄8
39⁄16
45⁄16
Dimensions (in.)
C
D E
F
37⁄32 5⁄16 17⁄32 1.10
319⁄32 5⁄16 17⁄32 1.10
411⁄32 11⁄32 119⁄32 1.58
53⁄32 1⁄2 119⁄32 1.63
Width
G
15⁄16
15⁄16
13⁄4
221⁄64
I
17
⁄64
17
⁄64
11
⁄32
11
⁄32
J
M6x60
M6x60
M12x80
M12x100
Holding
Force
Weight
550lbs
550lbs
770lbs
991lbs
1lb 1oz
1lb 2oz
1lb 11oz
3lbs 6oz
Horizontal Clamps — Straight Base, Adjustable Arm
Solid stainless steel axles
Used where height restrictions prevent use of a vertical clamp
● Complete with cushioned PVC handle grip
● All models have enclosed clamp arms for rigidity
● Zinc-plated and passivated steel plating protection
● Precision Auto Cad design geometry for smooth action
● Safety side plate guarding to prevent finger trapping
● See “Accessories” for other items
●
●
A
E
I
Dimensions (in.)
Model # A
B
C
D E
H50/1B
23⁄4
15⁄32 11⁄32 1⁄4 7⁄32
9
25
15
H75/1B
4 ⁄16 1 ⁄32 1 ⁄32 7⁄32 17⁄32
H75/1BSS 49⁄16 125⁄32 115⁄32 7⁄32 17⁄32
H150/1B 611⁄16 29⁄16 213⁄32 1⁄4 11⁄32
H150/1BSS611⁄16 29⁄16 213⁄32 1⁄4 11⁄32
5
H250/1B 83⁄16 37⁄32 31⁄8
⁄16 11⁄32
11
H350/1B 1025⁄32 41⁄4
41⁄4
⁄32 15⁄8
H450/1B 12
51⁄8
51⁄32 1⁄2 15⁄8
SS = stainless steel version
B
G
D
C
F
F
5
⁄8
31
⁄32
31
⁄32
11⁄2
11⁄2
121⁄32
25⁄16
219⁄32
G
9
⁄16
7
⁄8
7
⁄8
13⁄32
13⁄32
117⁄32
21⁄8
219⁄32
I
M5
M5
M5
M6
M6
M8x60
M10x80
M12x100
Holding
Force
Weight
110lbs
165lbs
165lbs
330lbs
330lbs
550lbs
770lbs
991lbs
1oz
3oz
3oz
7oz
7oz
1lb 1oz
1lb 11oz
3lb 6oz
Horizontal Clamps — Flanged Base, Adjustable Arm Type
Solid stainless steel axles
Used where height restrictions prevent use of a vertical clamp
● Complete with cushioned PVC handle grip
● All models have enclosed clamp arms for rigidity
● Zinc-plated and passivated steel
● Precision Auto Cad design geometry for smooth action
● Safety side plate guarding to prevent finger trapping
● Front mounting bracket available see “Accessories”
● See “Accessories” for other items
●
●
A
F
D
E
I
B
G
C
14
Dimensions (in.)
Model #
A
B
C
D
E
7
5
H50/2B
23⁄4
⁄8
11⁄32 1⁄4
⁄8
7
5
H50/2BSS 23⁄4
⁄8
11⁄32 1⁄4
⁄8
11
H75/2B
41⁄2
13⁄8
17⁄16 7⁄32
⁄16
11
H75/2BSS 41⁄2
13⁄8
17⁄16 7⁄32
⁄16
H100/2B
11
1
3
7
7
H150/2B
6 ⁄16 2 ⁄8
2 ⁄8
⁄32
⁄8-11⁄8
7
7
H150/2BSS 611⁄16 21⁄8
23⁄8
⁄32
⁄8-11⁄8
H200/2B
17
H250/2B
87⁄8
25⁄8
31⁄8
⁄64 11⁄32-17⁄32
H300/2B
11
H350/2B
103⁄4 39⁄16 41⁄4
⁄32 117⁄32-111⁄16
H450/2B
12
43⁄8
51⁄32 1⁄2
15⁄8
5
5
1
15
H700
10 ⁄8 3 ⁄16 3 ⁄16
⁄32 31⁄4
SS = stainless steel version
F
5
⁄8
5
⁄8
17
⁄32
17
⁄32
G
7
⁄16
7
⁄16
3
⁄4
3
⁄4
I
M5
M5
M5
M5
Holding
Force
Weight
110lbs
110lbs
165lbs
165lbs
13⁄32oz
13⁄32oz
3oz
3oz
1
1
31
⁄32
⁄32
1
111⁄32
15⁄8
15⁄8
11⁄4
125⁄32
25⁄16
13⁄4
M5
M5
M5
M5
M5
M5
M5
M5
110lbs
110lbs
110lbs
110lbs
110lbs
110lbs
110lbs
110lbs
13⁄32oz
13⁄32oz
13⁄32oz
13⁄32oz
13⁄32oz
13⁄32oz
13⁄32oz
13⁄32oz
31
72718 US Clamping 10-17.qxd:Layout 2
23/10/07
10:52
Page 15
Horizontal Clamps — Straight Base, Fixed Spindle Arm Type
Solid stainless steel axles
Used where height restrictions prevent use of a vertical clamp
● Complete with cushioned PVC handle grip
● All models have closed ends for rigidity
● Zinc-plated and passivated steel
● Precision Auto Cad design geometry for smooth action
● Safety side plate guarding to prevent finger trapping
● Front mounting bracket available see “Accessories”
● See “Accessories” for other items
●
A
●
F
J
H
B
G
D
I
E
Model #
H75/1C
H150/1C
C
A
41⁄4
67⁄32
Dimensions (in.)
B
C
D E
F
G
125⁄32 29⁄32 7⁄16 17⁄32 5⁄8 11⁄16
29⁄16 11⁄2 1⁄4 11⁄32 25⁄32 115⁄32
H
5
⁄32
3
⁄16
I
13
J
M5
M6
⁄64
⁄32
7
Holding
Force
Weight
165lbs
330lbs
3oz
7oz
Horizontal Clamps — Flanged Base, Fixed Spindle Arm Type
Solid stainless steel axles
Used where height restrictions prevent use of a vertical clamp
● Complete with cushioned PVC handle grip
● All models have enclosed clamp arms for rigidity
● Zinc-plated and passivated steel
● Precision Auto Cad design geometry for smooth action
● Safety side plate guarding to prevent finger trapping
● Front mounting bracket available see “Accessories”
● See “Accessories” for other items
●
A
●
F
D
E
I
Model #
H50/2C
H75/2C
H150/2C
B
G
C
A
23⁄4
41⁄4
63⁄32
B
7
⁄8
13⁄8
23⁄32
Dimensions (in.)
C
D
E
F
13
1
5
5
⁄16
⁄4
⁄8
⁄8
7
7
11
17
⁄8
⁄32
⁄16
⁄32
1
1
7
1 ⁄2
⁄32
1 ⁄32 13⁄16
G
7
⁄16
3
⁄4
31
⁄32
I
M5
M5
M6
Holding
Force
Weight
110lbs
165lbs
330lbs
3
⁄4oz
3oz
7oz
Horizontal Positive Locking Clamps — Straight Base Type
Used where a secondary positive lock is needed like turn over fixtures
Complete with cushioned PVC handle grip
● All models have closed ends for rigidity
● Zinc-plated and passivated steel-plating protection
● Stainless steel solid axles
● Positive mechanical bar lock
● See “Accessories” for other items
●
●
J
G
C
I
A
D
Dimensions (in.)
Model #
A
B
C
D E
F
H350/1BLC 69⁄32 1117⁄32 319⁄32 5⁄16 119⁄32 3⁄8
E
F
G
219⁄32
Width
Holding
I
21
⁄64
J
Force
Weight
10mm 770lbs 1.52lbs
B
Horizontal Positive Locking Clamps — Flanged Base, Adjustable Spindle Type
Used where a secondary positive lock is needed like turn over fixtures
Complete with cushioned PVC handle grip
● All models have closed ends for rigidity
● Zinc-plated and passivated steel-plating protection
● Stainless steel solid axles
● Positive mechanical bar lock
● Front mounting bracket available see “Accessories”
● See “Accessories” for other items
●
●
J
G
C
A
I
F
D
E
Dimensions (in.)
Model #
A B
C
D E
F
H350/2BLC 69⁄32 1117⁄32 41⁄32 5⁄16 119⁄32 119⁄32
Width
G
123⁄32
I
1
⁄64
Holding
J
Force
Weight
10mm 770lbs 1.52lbs
B
15
72718 US Clamping 10-17.qxd:Layout 2
23/10/07
10:52
Page 16
Hook Clamps
Used for locking lids, covers and boxes
Complete with cushioned PVC handle grip
● Zinc-plated and passivated steel-plating protection
● Solid stainless steel axles
● Adjustable swaged hook for increased holding capacity
● See “Accessories” for other items
●
●
A
G
G
D
F
E
E
Dimensions (in.)
Model #
A
B
C
D
E
1
LH200
65⁄32
11⁄32
23⁄4
17⁄32
⁄2
1
LH200SS
65⁄32
11⁄32
23⁄4
17⁄32
⁄2
3
LH400
93⁄4
115⁄32 317⁄32
15⁄8
⁄4
3
LH400SS
93⁄4
115⁄32 317⁄32
15⁄8
⁄4
7
15
1
9
LH700
12 ⁄32 1 ⁄16 4 ⁄2
2 ⁄32
11⁄4
7
15
1
9
LH700SS
12 ⁄32 1 ⁄16 4 ⁄2
2 ⁄32
11⁄4
SS = stainless steel version
B
C
F
G
13
⁄64
13
⁄64
1
⁄4
1
⁄4
11
⁄32
11
⁄32
⁄32
27
⁄32
15⁄32
15⁄32
111⁄16
111⁄16
27
Holding
Force
Weight
441lbs
441lbs
881lbs
881lbs
1542lbs
1524lbs
3oz
3oz
9oz
9oz
2.2lbs
2.2lbs
Latch Clamps Horizontal Position
Used for locking lids, covers and boxes
Complete with cushioned PVC handle grip
● Zinc-plated and passivated steel
● Models also available in Stainless Steel
● Adjustable latch arm for varying reach
● See “Accessories” for other items
●
●
A
F
D
E
Model #
A
B
LU200H
41⁄8-55⁄16
15⁄8
LU200HSS 41⁄8-55⁄16
15⁄8
LU400H
511⁄16-79⁄32 21⁄2
LU400HSS 511⁄16-79⁄32 21⁄2
LU700H
71⁄2-913⁄16 35⁄16
LU700HSS 71⁄2-913⁄16 35⁄16
SS = stainless steel version
B
C
Dimensions (in.)
C
D
E
7
13
1
⁄8
⁄64
⁄2
7
13
1
⁄8
⁄64
⁄2
1
3
1
1 ⁄4
⁄4
⁄4
1
3
11⁄4
⁄4
⁄4
21
17⁄8
⁄64
11⁄4
21
17⁄8
⁄64
11⁄4
F
3
⁄4
3
⁄4
1
1
13⁄8
13⁄8
Holding
Force
Weight
441lbs
441lbs
881lbs
881lbs
1542lbs
1542lbs
2oz
2oz
7oz
7oz
1lb 6oz
1lb 6oz
Latch Clamps Vertical Position
Used for locking lids, covers and boxes
Complete with cushioned PVC handle grip
● Zinc-plated and passivated steel
● Models also available in Stainless Steel
● Adjustable latch arm for varying reach
● See “Accessories” for other items
● Base mounting same as horizontal position latch clamp
●
●
A
E
F
D
Model #
A
B
LU200V
3
25⁄8-317⁄32
LU200VSS 3
25⁄8-317⁄32
17
LU400V
4 ⁄32
313⁄16-427⁄32
LU400VSS 417⁄32
313⁄16-427⁄32
LU700V
6
415⁄16-67⁄16
LU700VSS 6
415⁄16-67⁄16
SS = stainless steel version
B
C
Dimensions (in.)
C
D
E
7
1
7
⁄8
⁄2
⁄16
7
13
1
⁄8
⁄64
⁄2
1
1
3
1 ⁄4
⁄4
⁄4
1
1
3
1 ⁄4
⁄4
⁄4
9
1
21
1 ⁄16
⁄64
1 ⁄4
9
1
21
1 ⁄16
⁄64
1 ⁄4
F
3
⁄4
3
⁄4
1
1
13⁄8
13⁄8
Holding
Force
Weight
441lbs
441lbs
881lbs
881lbs
1542lbs
1542lbs
2oz
2oz
7oz
7oz
1lb 6oz
1lb 6oz
Heavy-Duty Latch Clamps — Horizontal Position
●
F
G
D
E
B
C
16
Used for locking lids, covers and boxes
Complete with cushioned PVC handle grip
● Zinc-plated and passivated steel – for corrosion protection
● Fully adjustable latch arm
● 2 position latch for vertical or horizontal use
● See “Accessories” for other items
●
A
G
Model # A
LU2000H 105⁄8-129⁄16
LU4000H 133⁄16-159⁄16
B
41⁄2
53⁄16
Dimensions (in.)
C
D
E
29⁄16 9⁄32
131⁄32
31⁄16 15⁄32
27⁄32
F
2
23⁄16
G
13
⁄32
15
⁄32
Holding
Force
Weight
4405lbs
8811lbs
3lb 1oz
5lb 9oz
72718 US Clamping 10-17.qxd:Layout 2
23/10/07
10:52
Page 17
Push-Pull Slimline Clamps
A range of toggle clamps for use when positive clamping is required
Complete with cushioned PVC handle grip
● Also available in Stainless Steel
● Large bushing area for increased life
● See “Accessories” for other items
●
A
●
S
Stroke
E
C
D
Model # A
P50
P50SS
P100
P100SS
P200
P200SS
P250
P350
P400
P400SS
P450
P550
P750
B
G
F
2 ⁄8
25⁄8
211⁄16
11
⁄16
45⁄16
45⁄16
55⁄16
427⁄32
67⁄8
67⁄8
613⁄16
63⁄8
95⁄32
5
B
1 ⁄8
15⁄8
33⁄4
33⁄4
53⁄8
53⁄8
311⁄32
313⁄16
6
6
423⁄32
421⁄16
55⁄16
5
C
1 ⁄8
13⁄8
11⁄4
11⁄4
21⁄8
21⁄8
23⁄32
115⁄16
35⁄8
35⁄8
23⁄8
23⁄8
23⁄4
3
D
⁄8
⁄8
13⁄16
13⁄16
7
⁄8
7
⁄8
–
–
–
–
–
–
–
5
5
Dimensions (in.)
E
F
G
S
⁄8
⁄
⁄16
11
⁄16
13⁄16-15⁄8
13⁄16-15⁄8
113⁄32
–
13⁄16-13⁄4
13⁄16-13⁄4
115⁄32
–
–
5
5
8
11
⁄16
7
⁄16
13⁄16
29
⁄32
13⁄16
13⁄16
29
⁄32
–
xx
xx
13⁄16
–
–
7
⁄2
⁄2
11⁄32
11⁄32
31
⁄32
31
⁄32
31
⁄32
–
13⁄16
13⁄16
13⁄16
–
–
1
1
5
⁄
⁄
8
5
8
13
⁄16
13
⁄16
19⁄16
19⁄16
11⁄4
31
⁄32
211⁄16
211⁄16
11⁄2
11⁄2
219⁄32
I
Holding
Force
Weight
M4x12
M4x12
M16x1,5
M16x1,5
M8x25
M8x25
M6x12
M16x1,5
M24x1,5
M24x1,5
M10x20
M20x1,5
M24x1,5
110lbs
110lbs
220lbs
220lbs
485lbs
485lbs
551lbs
771lbs
881lbs
881lbs
991lbs
1211lbs
1652lbs
1.3oz
1.3oz
4oz
4oz
9oz
9oz
8oz
5oz
1lb 7oz
1lb 7oz
1lb 8oz
1lbs
2.2lbs
SS = stainless steel version
Heavy-Duty Push-Pull Clamps
A
J
●
Stroke
F
D
Unique to Brauer heavy-duty push-pull clamps
A range of toggle clamps for use when arduous environment clamping is required
● Complete with cushioned PVC handle grip
● Main components steel
● Large bearing area for long plunger life
● Plunger locks in both full forward and retracted position
● Machined cast base.
● See “Accessories” for other items
●
I
S
E
B
Model #
P600
P1200
P2500
P5000
A
5
71⁄2
1111⁄16
153⁄8
B
25⁄8
31⁄2
41⁄4
47⁄8
Dimensions (in.)
C
D E
F
S
11⁄2 1 17⁄16 1.32 11⁄4
25⁄32 5⁄16 3
1.62 131⁄32
15
4
⁄32 31⁄2 2.13 215⁄16
15
7
1
5 ⁄16 ⁄32 5 ⁄2 2.25 315⁄16
ØI
7
⁄32
21
⁄64
13
⁄32
13
⁄32
J
M8x30
M10x40
M12x60
M16x60
Holding
Force
Weight
1322lbs
2643lbs
5507lbs
11013lbs
1lbs
3lbs
8lbs
13lb 6oz
C
Long-Handled Push-Pull Clamps
Unique to Brauer heavy-duty push-pull clamps
A range of toggle clamps for use when arduous environment clamping is required
● Complete with cushioned PVC handle grip
● Main components steel
● Large bearing area for long plunger life
● Plunger locks in both full forward and retracted position
● Machined cast base. Investment precision
● Long handle for increased mechanical advantage
● See “Accessories” for other items
●
●
A
I
J
F
S
Stroke
E
G
D
B
C
Model #
P600L
P1200L
P2500L
P5000L
A
5
71⁄2
1111⁄16
153⁄8
B
51⁄8
77⁄8
11
14
C
11⁄2
25⁄32
4
57⁄16
Dimensions (in.)
D E
F
G
29⁄16 1
1.32 17⁄16
4
13⁄8 1.62 15⁄8
51⁄4 13⁄4 2.13 13⁄4
63⁄4 23⁄4 2.25 23⁄4
S
I
11⁄4 7⁄32
13⁄32 21⁄64
215⁄16 13⁄32
315⁄16 13⁄32
J
M8x30
M10x40
M12x60
M16x60
Holding
Force
Weight
1322lbs
2643lbs
5507lbs
11013lbs
1lb 2oz
3lb 6oz
9lb 1oz
15lb 6oz
17
72718 US Clamping 18-25.qxd :Layout 1
23/10/07
10:55
Page 18
Precision Push-Pull Clamp - Model SP700
0.75
0.55
1540lbs
daN
3.66
0.20
● Plunger
is precision ground steel self-locking at forward stroke position
steel precision machined base, nose mounting or body mounting
● Supplied complete with MBO840 setscrews and nuts
● See “Accessories” for other items
1.38
● Carbon
M24 x 1.5
5.71
30lbs
R2
.56
0.22
1.26
Stroke
0.95
185º
5.71
Model #
Holding
Force
Weight
SP700
1540lbs
1.8lbs
1.38
M8 x 1.8 Deep
0.95
Precision Push-Pull Clamp
● Heavy
Tack weld base
to the clamp
90º
C
duty high force
locks at the extended end of the stroke only
● Base is fixed using accessories
● See “Accessories” for other items
● Piston
180º
E
F
H
G
D
A
B
G
Dimensions (in.)
C
D
E
Model #
A
B
P1150
P2250
4.26 6.27 1.81
5.55 8.37 2.17
F
0.39 4.41 1.38
0.55 5.00 1.77
G
H
Holding
Force
Weight
0.75
0.98
M12
M16
2530lbs
4950lbs
2530lbs
4070lbs
Precision Push-Pull Clamp
● Heavy
duty high force
locks at the extended end of the stroke only
● Base is fixed using accessories
● See “Accessories” for other items
● Piston
Tack weld base
to the clamp
180º
E
C
F
H
G
A
D
180º
B
G
Model #
A
B
Dimensions (in.)
C
D
E
F
G
Holding
Force
Weight
P1150L
P2250L
5.90
7.65
8.50
11.0
2.30
3.07
1.38
1.78
0.74
0.98
2530lbs
4070lbs
2530lbs
4070lbs
Base #
C
Dimensions (in.)
D
E
F
G
H
Weight
P1150B
P2250B
2.76
3.55
1.97
2.76
0.26
0.28
0.30
0.48
0.84lbs
1.98lbs
0.38
0.55
4.41
5.00
P Series Base Accessory
G
E
BASE
F
1.38
1.77
H
C
D
18
Part #
P1150B
P2250B
Fits Models
P1150, P1150L
P2250, P2250L
1.19
1.58
72718 US Clamping 18-25.qxd :Layout 1
23/10/07
15:12
Page 19
Pneumatic Power Clamps - Interchangeable with Existing Types
D
B
F
● Mounting
face hole patterns and hole sizes can be modified to suit requirements
Enclosed body
● No reduction of clamping torque as clamp locks
● Flat, ‘slim line’ construction
● Variety of arm types
● Opening angles up to 135º
● Long service life
● Air cylinders max 8 bar with oil free dry running design
● Reed switches on cylinder (magentic piston) (R)
● Sensing options:
= without sensing
= supplied with inductive sensing 10-30V weld immune and
isolated M12x10 sensor thread
E
●
G
A
H
C
Arm Types 1 2 3
2
2.13
1.0
Dimensions (in.)
Model # A
B
C
D
E
F
G
H
BPC 25 12.00 4.02 3.35 2.52 5.24 1.06 1.26 1.18
BPC 32 12.28 4.02 3.35 2.52 5.24 1.06 1.26 1.18
0.79
Ø7.2
Ø6H7
Holding
Moment
Clamping Piston Cylinder Weight
Moment
Ø
Port
(lbs)
125ft/lbs 40ft/lbs
250ft/lbs 85ft/lbs
0.980
1.259
5.25
5.75
M5
G1⁄8
0.55
3
1
3.11
0.24
ORDER EXAMPLE
4.21
Standard Opening Angle
90º 105º 120º 135º
BPC
BPC
25
32
H
V
2
3
0
I
105
120
A
A
BODY MATERIAL (ALUMINIUM)
ARM OPENING ANGLE
SENSING OPTION
CLAMPING ARM VARIANT
BRAUER
POWER
CLAMP
CLAMPING ARM POSITION (H - HORIZONTAL, V - VERTICAL)
CYLINDER DIAMETER Ø
Pnuematic Slim Line Verticle Toggle Clamp - Adjustable Spindle, Flange Base
G
H1
90º
Space saving design
Can be mounted vertically or horizontally
● Fitted with double-acting Norgren or Festo pneumatic cylinders
● Replaceable cylinders
● 30-90lbs operating pressure range
● Magnetic piston for sensor-position monitoring
● Adjustable speed
● Clamp zinc-plated and passivated
● Stainless steel rivets running in case-hardened bushes
● Bearings pre-greased
● Complete with heat-treated, zinc-plated pressure screws
● Supplied with set screw, sliders, nuts and neoprene cover
● See “Accessories” for other items
●
●
H5
I
F3
N
H
HW
F5
F4
ØW
R
F2
F1
E
H4
H3
F
B
U1
ØD
R
A G
T1
V
L
K C
Stroke Sensing Switch
Part No.
M/50/LSU/CP Ø25
M/50/LSU/CP Ø32
M/50/LSU/CP Ø40
Cylinder Cylinder
Stroke Piston Ø
1.65
2.05
2.44
1.00
1.26
1.58
Model #
V100VX
V200VX
V300VX
Model #
V100VX
V200VX
V300VX
F1(lbs)
220
308
440
C
0.49
0.62
1.26
ØD
0.22
0.26
0.33
F1(lbs)
264
550
660
E
1.06
1.65
2.04
F
0.94
1.18
1.57
F1(lbs)
154
132
330
G
1.06
1.00
1.77
H
2.56
2.83
3.93
F1(lbs)
220
242
484
H1
5.71
7.28
9.45
H3
0.63
0.70
0.87
Dimensions (in.)
F1(kN)
Height
66
6.69
110
8.07
165
10.23
Dimensions (in.)
H4
H5
HW
0.50 0.50 1.46-1.81
0.63
1.50-1.97
1.30 1.30 1.97-3.11
Width
5.12
6.30
8.66
I
0.47
0.70
0.79
Screw
1.38
1.77
2.56
K
0.63
0.63
0.71
N
3.70
4.25
5.66
R
M5
G1⁄8
G1⁄8
WGT(g)
1.76
2.42
3.52
a
0.24
0.32
0.39
Q
0.31
0.51
0.79
U1
2.76
3.54
4.13
T1
3.54
4.13
5.31
b
1.57
2.56
3.35
V
2.44
2.76
3.35
ØW
0.39
0.47
0.63
19
72718 US Clamping 18-25.qxd :Layout 1
23/10/07
10:55
Page 20
Pneumatic Vertical Clamps
A
● Compact
cylinder with magnetic piston
be operated with dry air; air lubrication extends cylinder life
● Operating air pressure range 2-6 bar
● One piece body base to maintain alignment
● See “Accessories” for other items
C
● Can
E
J
D
H
F
I
B
Model #
V75X
V150X
V250X
V450X
G
A
7
815⁄16
121⁄8
113⁄16
B
2
21⁄2
35⁄16
413⁄16
Dimensions (in.)
C
D
E
F
G
13⁄16 3⁄16 15⁄16 5⁄8 23⁄32
9
15⁄8
⁄32 11⁄16 1⁄2 15⁄16
5
3
⁄16 11⁄4 3⁄4 13⁄8
215⁄16 5⁄16 3⁄4
11⁄4 21⁄8
ØH
11
⁄64
13
⁄64
9
⁄32
11
⁄32
I
G1⁄8
G1⁄8
G1⁄8
G1⁄8
J
M5x35
M6x50
M8x60
M12x100
Holding
Force
Weight
165lbs
330lbs
550lbs
991lbs
11oz
1lb 5oz
2lb 8oz
6lb 5oz
Pneumatic Swing Clamps
● 90°
swing of arm for clearance of workplace
clamping stroke
● High repeatable clamping accuracy
● See “Accessories” for other items
● Fast
E
Dimensions (in.)
Holding
Model #
A
B
C
D
E
F
G
I
Force
PNS 32-10A 5
13⁄4
125⁄32 15⁄16 25⁄32 15⁄32 G1⁄8
M8x1,25 132lbs
PNS 32-10C 5
13⁄4
125⁄32 15⁄16 25⁄32 15⁄32 G1⁄8
M8x1,25 132lbs
PNS 40-20A 513⁄16 21⁄32 215⁄32 19⁄16 25⁄32 15⁄32 G1⁄8
M8x1,25 231lbs
13
1
15
9
5
1
25
PNS 40-20C 5 ⁄16 2 ⁄32 2 ⁄32 1 ⁄16
⁄32 1 ⁄32 G ⁄8
M8x1,25 231lbs
PNS 50-20A 621⁄32 31⁄32 227⁄32 115⁄16 27⁄32 17⁄16 G1⁄4
M8x1,25 370lbs
PNS 50-20C 621⁄32 31⁄32 227⁄32 115⁄16 27⁄32 17⁄16 G1⁄4
M8x1,25 370lbs
PNS 63-20A 625⁄32 31⁄32 227⁄32 211⁄32 27⁄32 17⁄8
G1⁄4
M10x1,5 616lbs
25
1
27
11
7
1
27
PNS 63-20C 6 ⁄32 3 ⁄32 2 ⁄32 2 ⁄32
⁄32 1 ⁄8
G ⁄4
M10x1,5 616lbs
‘A’ suffix denotes anti-clockwise working. ‘C’ suffix denotes clockwise working
D
B
I
A
C
F
G
Weight
1lb 9oz
1lb 9oz
1lb 14oz
1lb 14oz
3lb 3oz
3lb 3oz
4lb 2oz
4lb 2oz
Heavy-Duty Pneumatic Push-Pull Clamps
A
● Compact
G
cylinder with magnetic piston
be operated with dry air; air lubrication extends cylinder life
● Operating air pressure range 2-6 bar
● One piece body base to maintain alignment
● Precision ground piston rods
● See “Accessories” for other items
● Can
E
S
Stroke
D
F
H
B
Model #
P600X
P1200X
P2500X
I
A
123⁄4
171⁄8
2223⁄32
B
21⁄8
3
325⁄32
Dimensions (in.)
C
D E
F
15⁄8 1 15⁄16 17⁄16
25⁄32 5⁄16 15⁄8 3
41⁄32 7⁄8 125⁄32 21⁄8
ØG
7
⁄32
21
⁄64
13
⁄32
S
31
⁄32
11⁄4
13⁄32
I
M16x150
M10x40
M12x60
H
G1⁄8
G1⁄8
G1⁄4
Holding
Force
Weight
4400lbs 22lb 10oz
2640lbs 8lb 4oz
5500lbs 16lb 4oz
C
Heavy-Duty Pneumatic Vertical Toggle Clamps
● For
use in arduous environments
arm types as standard
● All leading pneumatic cylinders including SMC, ASCO Joucomatic and Festo can be fitted
● Heavy duty extremely high holding forces
● See “Accessories” for other items
B
● Adjustable
I
G
E
D
F
C
A
H
20
Model #
VA300BX
VA700CX
VA1200CX
VA2400CX
A
9.0
99⁄16
125⁄8
17
B
225⁄32
313⁄32
313⁄32
313⁄32
Dimensions (in.)
C
D
E
F
23
4.0 13⁄4 1⁄4
⁄32
25⁄32 3.0 31⁄32 311⁄32
25⁄32 311⁄32 11⁄4 329⁄32
44⁄32 35⁄16 7⁄8
329⁄32
G
1.26
1.97
2.36
3.0
H
G1⁄8
G1⁄4
G1⁄4
G1⁄4
I
M6x50
M12x100
M2x100
M16x150
Holding
Force
Weight
550-770lbs
1540lbs
2640lbs
5280lbs
4lb 13oz
9lb 14oz
12lb 10oz
19lb
72718 US Clamping 18-25.qxd :Layout 1
23/10/07
10:55
Page 21
Manual Operation Toggle Presses
●A
comprehensive range of manual presses suitable for a variety of applications
generation of high forces towards the end of their stroke make these presses
suitable for work such as swaging, press fitting, riveting, piercing and punching.
● All frames are manufactured from machined SG iron casting for consistent quality and
durability.
● Replaceable operating mechanisms
● See “Accessories” for other items
● The
E
D
F
Stroke
S
Model #
P600PR
P1200PR
P2500PR
TPR1
TPR2
TPR3
B
G
C
C
A
6
79⁄16
93⁄8
615⁄32
87⁄8
1113⁄16
B
8
1113⁄32
167⁄16
133⁄4
199⁄32
191⁄2
Dimensions (in.)
C
D E
13
131⁄32
⁄32 35⁄32
1
211⁄32
⁄2 33⁄4
1
3
⁄2 459⁄64
11⁄4 -27⁄8 – 35⁄32
25⁄32-317⁄32 – 55⁄16
229⁄32-411⁄32 – 55⁄16
F
33⁄4
417⁄3
545⁄64
–
–
–
G
215⁄16
315⁄16
423⁄32
19⁄16-55⁄16
1
⁄4-65⁄8
3
⁄32-413⁄16
S
11⁄4
131⁄32
215⁄16
19⁄16
19⁄16
19⁄16
I
M8x30
M8x30
M12x60
xx
xx
xx
Holding
Force
Weight
1322lbs
2643lbs
5507lbs
1124lbf
1686lbf
3150lbf
7lb 9oz
16lb 2oz
34lb
20lb
42lb
86lb
A
Pneumatic Operation Toggle Presses
●A
comprehensive range of pnuematically operated presses suitable for a variety of
applications
● The generation of high forces towards the end of their stroke make these presses
suitable for work such as swaging, press fitting, riveting, piercing and punching.
● All frames are manufactured from machined SG iron casting for consistent quality and
durability.
● Cylinders can run on unlubricated air supplies
● Precision ground cylinder rods for accuracy
● See “Accessories” for other items
D
E
F
J
A
Stroke
S
I
G
Model #
P600XPR
P1200XPR
P2500XPR
C
A
17
225⁄8
291⁄2
B
17
227⁄10
2947⁄100
Dimensions (in.)
C D
E F
23⁄64 35⁄32 25⁄64 33⁄4
21⁄2 33⁄4 1⁄2 417⁄32
31⁄8 459⁄64 1⁄2 545⁄64
G
215⁄16
315⁄16
423⁄32
J
S
G1⁄8 31⁄32
G1⁄8 11⁄4
G1⁄4 131⁄32
I
M8x30
M10x40
M12x60
Holding
Force
Weight
1320lbs 11lb 8oz
2640lbs 21lb
5500lbs 42lb
B
Rack and Pinion Presses
E
F
● Very
high precision press
comprehensive range suitable for a variety of applications
● The generation of high forces towards the end of their stroke make these presses
suitable for work such as swaging, press fitting, riveting, embossing and glueing.
● All frames are manufactured from machined SG iron casting for consistent quality and
durability.
● See “Accessories” for other items
●A
D
Stroke
S
A
Model #
RPP1
RPP2
C
A
133⁄8
185⁄16
B
615⁄32
827⁄32
Dimensions (in.)
C
D
E
227⁄32
31⁄8
311⁄32
317⁄32
41⁄4
45⁄16
F
31⁄8
317⁄32
S
111⁄16
115⁄16
Weight
19lbs
46lbs
B
Pneumatic Operation Toggle Presses
●A
comprehensive range suitable for a variety of applications
generation of high forces towards the end of their stroke make these presses
suitable for work such as swaging, press fitting, riveting, embossing and glueing.
● All frames are manufactured from machined SG iron casting for consistent quality and
durability.
● See “Accessories” for other items
● The
E
A
F
D
Stroke
S
C
B
Model #
PNPR1
PNDP1
A
273⁄64
2411⁄16
B
821⁄32
821⁄32
Dimensions (in.)
C
D
E
317⁄32
41⁄4
45⁄16
17
1
3 ⁄32
4 ⁄4
45⁄16
F
317⁄32
317⁄32
S
13⁄8
19⁄16
Weight
49lbs
41lbs
21
72718 US Clamping 18-25.qxd :Layout 1
23/10/07
10:55
Page 22
Stroke-Sensing Kits
Kit Number Used
Clamp Model
SK/1
V75X
SK/2
V150X
SK/3
V250X, P600X
SK/4
V450X, P1200X
SK/5
P2500X
SK/6
V750X, V1750X
SK/7
PNS20-10A, PNS20-10C
SK/8
PNS32-10A, PNS32-10C, PNS40-20A, PNS40-20C, PNS50-20A, PNS50-20C, PNS63-20A, PNS63-20C
SK/9
V2000X
SK/10
VA3000BX, VA700CX, VA1200CX, VA2400CX
Note: Each SK Kit includes 2 individual sensors
Cam Push/Cam Pull Clamps
Nominal
Model #
Holding Force (lbs)
CP1005
1100
CP1006
1100
CP1007
1100
CP1008
1100
RH = Right hand LH = Left hand
Weight
(lbs)
Version
1.76
1.76
1.76
1.76
● Cam
operated
Right hand push
● Rear mounted
● See “Accessories” for other items
RH/PUSH
RH/PULL
LH/PUSH
LH/PULL
●
Ø1.46
0.39
0.39
pressure
sleeve only
moves axially
Ø0.55
1.02
push
0.79
Ø0.55
0.79
pull
Ø2.17
Ø1.10
tension cam
45º
4º
0.08
0.39
1.83
2.15
1.18
quick travel
65º
self-locking clamp travel
l
ave
avel
t tr
ping tr
fas /1006
c lam
°
65° 007/1008
25 005
1
1
starting point
RH types
25º
65° clam
ping
1005/1 travel
006
2 5°
f
100 ast t
7/1 rav
00 el
8
final point
RH types
final point
LH types
4.73
Ø0.55
starting point
LH types
45º
R120
1.81
through axle
M6 x 0.36 Deep
22
72718 US Clamping 18-25.qxd :Layout 1
23/10/07
10:55
Page 23
Heavy-Duty Cam Push Clamps
Cam push clamps are of rugged build quality, ideal for machine shops where vibration may be an
issue
● Unique, patented range of cam clamps
● Significant cost benefits over Hydraulic clamps in repetitive machining
● A fraction of the cost of hydraulic workholding
● Very high holding forces
● See “Accessories” for other items
●
A
C
B
Model #
CP1500
CP2000
CP3000
CP1500L
CP2000L
CP3000L
I
F
E
D
G
A
233⁄64
35⁄16
325⁄32
131⁄32
219⁄32
325⁄32
B
31⁄32
41⁄16
533⁄64
649⁄64
831⁄32
129⁄32
Dimensions (in.)
C
D
E
117⁄64 117⁄32 19⁄32
139⁄64 131⁄32 25⁄32
21⁄8
243⁄64 63⁄64
117⁄64 117⁄32 19⁄32
139⁄64 131⁄32 25⁄32
21⁄8
243⁄64 63⁄64
F
63
⁄64
111⁄32
111⁄16
11⁄32
111⁄32
111⁄16
ØG
1
⁄4
21
⁄64
13
⁄32
1
⁄4
21
⁄64
13
⁄32
I
M6x19
M8x25
M12x35
M6x19
M8x25
M12x35
Holding
Force
Weight
1320lbs
1430lbs
1430lbs
3300lbs
3740lbs
4400lbs
0.6lbs
1.3lbs
3.4lbs
0.8lbs
1.7lbs
4.4lbs
Heavy-Duty Cam Swing Clamps
Cam swing clamps are of rugged build quality, ideal for machine shops where vibration may be an
issue
● Cam swing clamps show significant cost benefits over more expensive hydraulic and strap clamping
● Out-put holding forces same as hydraulic clamping
● Ideal for vibratory machine clamping
● High output force cam mechanism
● See “Accessories” for other items
●
A
C
B
D
F
E
Fig 1
Fig 2
G
Dimensions (in.)
Model #
A
B
C
D
E
F
ØG
45
3
25
__
CS300*
43⁄8
11⁄2
117⁄64
⁄64
⁄64
⁄64
__
__
1
CS800*
6
21⁄8
17⁄8
17⁄64
⁄4
__
__
21
CS1200*
77⁄8
31⁄32
211⁄64
129⁄64
⁄64
*Above models are clockwise version.
To order anti-clockwise version add suffix A to order code.
Fig 3
Holding
Force
Weight
660lbs
1760lbs
2640lbs
0.4lbs
0.9lbs
2lbs
Heavy-Duty Cam Ram Clamps
● Unique,
patented range of cam clamps
Rugged build quality, ideal for machine shops
● Significant cost benefits over strap clamps in repetitive machining
● A fraction of the cost of hydraulic workholding
● Very high holding forces
● See “Accessories” for other items
●
Stroke
S
B
F
A
Model #
C
D
E
A
B
Dimensions (in.)
C
D
E
F
S
Holding
Force
Weight
55
CR4000*
421⁄64 139⁄64 5⁄64
121⁄32 13⁄16
⁄64 0.25/0.08 8800lbs
1.21lbs
3
CR5000*
533⁄64 21⁄4
⁄32
213⁄64 121⁄32 17⁄64 0.32/0.10 11000lbs 2.9lbs
*Above models are clockwise version. To order anti-clockwise version add suffix A to
order code.
23
72718 US Clamping 18-25.qxd :Layout 1
23/10/07
14:24
Page 24
Heavy-Duty Hex Key Clamps
Bolt body housing onto fixture, key down swing bolt onto work piece
Ideal for vibratory clamping such as CNC clamping
● The 1016 series of swing clamp assemblies comprises complete assemblies of clamping
arm,clamping bolt, return spring and housing, ready for bolting to a fixture ideal for heavy
dutymachining applications.
● See “Accessories” for other items
●
A
●
F
E
D
G
Model #
1016-08
1016-10
1016-12
1016-16
B
C
A
11⁄32
17⁄32
17⁄16
123⁄32
B
27⁄16
229⁄32
37⁄16
413⁄32
Dimensions (in.)
C
D
E
1
11⁄2
11⁄32
13⁄16
157⁄64
111⁄32
13⁄8
211⁄64
137⁄64
25
9
1 ⁄32
2 ⁄16
157⁄64
F
ØG
1
⁄4
21
⁄64
13
⁄32
1
⁄2
⁄64
15
⁄32
19
⁄32
25
⁄32
25
Holding
Force
Weight
3960lbs
4400lbs
5500lbs
6600lbs
12oz
1lb 2oz
1lb 12oz
3lb 8oz
Swing Clamps
D
A
E
●
●
Ideal for vibratory area clamping such as CNC tooling
The 1015 series of swing clamp can be used with the 1016 housing assemblies ideal for m/c
shops and heavy duty machining applications.
F
B
Model #
1015-08
1015-10
1015-12
1015-16
C
G
A
5
⁄16
13
⁄32
1
⁄2
21
⁄32
B
13⁄4
25⁄32
217⁄32
311⁄32
Dimensions (in.)
C
D
E
11
11
3
⁄16
⁄16
⁄8
27
7
15
⁄32
⁄8
⁄32
1
9
1
1 ⁄16
⁄16
5
13
25
1 ⁄16
1 ⁄32
⁄32
F
G
0.784
0.941
1.098
1.335
⁄32
⁄32
13
15
⁄
9
16
11
16
⁄
Holding
Force
Weight
3960lbs
4400lbs
5500lbs
6600lbs
3oz
6oz
8oz
1lb
Pull Back Clamp
● Zinc
plated and passivated steel
steel rivets
● Unique action similar to a wide-opening locking plier
● Comfortable, cushioned PVC grip
● Complete with mounting base
● See “Accessories” for other items
● Stainless
Model #
TC79
A
3
B
83⁄4
Dimensions (in.)
C
D
E
F
9
15⁄8
⁄32
1
13⁄4
G
11⁄4
ØH
17
⁄64
I
M12x50
F
3
⁄8
G
9
⁄16
Holding
Force
Weight
793lbs
1lb 1oz
Pull Back Clamp
● Zinc
plated and passivated steel
steel rivets
● Unique action similar to a wide-opening locking plier
● Comfortable, cushioned PVC grip
● Complete with mounting base
● Bottom jaw included with clamp
● See “Accessories” for other items
D
● Stainless
A
E
swivel-foot
spindle
B
Gap can be increased or de- G
creased
by moving
bottom jaw
C
Model #
TC345
F
square
24
trigger release
A
63⁄8
B
101⁄8
Dimensions (in.)
C
D
E
11
3
24⁄16
⁄16
⁄8 -16
Holding
Force
Weight
800lbs
2lb 7oz
72718 US Clamping 18-25.qxd :Layout 1
23/10/07
10:55
Page 25
Plastic Grips
Part #
GR/01
GR/02
GR/03
GR/04
GR/05
GR/06
GR/07
GR/08
GR/09
GR/10
GR/11
GR/12
GR/13
BR/1
BR/2
BR/3
B7
B12
B24
H
W
WA
ØD
To Fit Handles Dim’s
H
W
WA
ØD
5
5
13⁄4
⁄32
⁄16
3
3
23⁄8
⁄16
⁄8
1
3
21⁄8
⁄4
⁄8
3
1
25⁄32
⁄16
⁄2
5
1
29⁄32
⁄32
⁄2
11
1
19
3 ⁄32
⁄4
⁄32
9
1
5
2 ⁄16
⁄4
⁄8
3
3
1
2 ⁄8
⁄16
⁄2
5
11
41⁄8
⁄16
⁄16
3
3
7
3 ⁄4
⁄8
⁄8
3
423⁄32
⁄8
1
5
3
41⁄8
⁄16
⁄4
5
7
417⁄32
⁄16
⁄8
3
3
2 ⁄4
⁄8
1
3
⁄2
5
4
⁄8
9
3
3 ⁄16
⁄4
7
4
⁄8
4
1
Fits Clamp Model
H75, V75, CV75, V100, H100
H150
V150, LH200
H200
V200, P100
V250, BR-H250, CV250, V300, LH400, P200, P350
H300
P250
V350, CV350, H350, P400, P450, P550, TC79
V450, H450, LH700
V550
H700
P750
P600L
P1200L
P2500L
VA700, P5000L
VA1200
VA2400
VA Series Accessories - Grip
● To
fit appropriate handle
H
Model #
B3
B7
B12
B24
Dimensions (in.)
H
21⁄8
311⁄16
329⁄32
329⁄32
B
⁄32
⁄32
27
⁄32
31
⁄32
15
23
B
VA Series Accessories - Handle
B
● For
welding to the desired clamp and at the desired
position
Model #
Dimensions (in.)
A
A3
A7
A12
A24
A
ØB
127⁄32
317⁄32
329⁄32
329⁄32
⁄2
⁄8
3
⁄4
1.00
1
5
VA ‘S’ and ‘T’ Series Arm Accessory
A
● For
● Can
B
C
extending the stub arm
be drilled to accept fixture arms
D
E
Model #
C3
C7
C12
C24
A
211⁄32
29⁄32
31⁄8
329⁄32
Dimensions (in.)
B
C
3
7
⁄8
⁄32
5
3
⁄16
⁄8
9
15
⁄16
⁄32
9
5
⁄16
⁄8
D
⁄32
25
⁄32
31
⁄32
9
⁄16
15
E
⁄8
5
31
32
15⁄32
15⁄32
25
72718 US Clamping 26-32.qxd:Layout 1
23/10/07
14:09
Page 26
VA Series Base Accessory
● Heavy
A
duty clamp base for welding to heavy duty mechanisms
E
B
C
Model #
D3
D7
D12
D24
D
F
A
114⁄32
115⁄16
211⁄32
23⁄4
Dimensions (in.)
B
C
31
11
⁄32
⁄16
31
13⁄8
⁄32
19⁄16
15⁄32
15
1 ⁄16
13⁄4
D
15⁄32
19⁄16
115⁄16
217⁄32
E
3
⁄16
5
⁄16
5
⁄16
5
⁄16
ØF
7
⁄32
1
⁄4
21
⁄64
21
⁄64
F
ØG
13
⁄64
13
⁄64
21
⁄64
Front Mounting Brackets - Vertical and Horizontal Clamps
A
B
F
Model #
FM1
FM2
FM3
D
C
G
A
111⁄16
21⁄8
3
B
15⁄32
13⁄4
25⁄8
Dimensions (in.)
C
D
11
19
⁄16
⁄32
3
1
⁄4
13⁄4
11⁄4
E
129⁄64
141⁄64
217⁄16
⁄32
15
⁄32
13
⁄16
17
E
Part #
FM1
FM2
FM3
Fits Flanged Base Models
V75, V150, H75, CV75
V250, H150, H250, CV250
V350, V450, H350, H450,CV350
Mounting Brackets - Nose Mounting Push-Pull Clamps
A
Dimensions (in.)
B
Model #
FM16
FM20
FM24
C
A
13⁄8
125⁄32
131⁄32
B
63
⁄64
114
13⁄8
C
⁄32
5
⁄8
5
⁄8
5
D
13⁄16
13⁄8
137⁄64
E
⁄16
25
⁄32
7
⁄8
11
F
M16x1,5
M20x1,5
M24x1,5
F
Part #
FM16
FM20
FM24
D
E
Fits Models
P100, P350
P200, P250, P550
P400, P450, P750
Flanged Washers
To Fit Thread T
ØDA
W
26
Part #
FW05/09
FW05/10
FW06/12
FW08/15
FW10/20
FW12/23
FW16/27
TH’D
T
3
⁄16
3
⁄16
1
⁄2
5
⁄16
3
⁄8
1
⁄2
5
⁄8
W
11
⁄32
25
⁄64
15
⁄32
19
⁄32
25
⁄32
29
⁄32
11⁄16
ØDA
1
⁄2
19
⁄32
11
⁄16
7
⁄8
1
11⁄4
13⁄8
Fits Clamp Models
With B Type Arm
H50
H75, V75, V75X,V100
H150, V150, V150X,V200
H250, V250, V250X,V300
H350, V350
H450, V450, V450X,H700
V550
72718 US Clamping 26-32.qxd:Layout 1
23/10/07
14:09
Page 27
Setscrews
T
L
Part #
MB0420
MB0520
MB0535
MB0625
MB0650
MB0840
MB0860
MB1050
MB1080
MB1250
MB12100
MB1680
MB16150
TH’D
T
M4
M5
M5
M6
M6
M8
M8
M10
M10
M12
M12
M16
M16
L
0.8
0.8
1.40
1.0
2.0
1.58
2.37
2.0
3.15
2.0
4.0
3.15
6.0
Fits Models
P50
H50
V75, H75, V100, CV75, V75X
P100, P250, P350
V150, V200, H150, V150X
P200, P550, P600, P600L, P600X
V250, V300, CV250, H250, V250X
P400, P450, P750, P1200, P1200L, P1200X
V350, H350, CV350
P2500, P2500L, P2500X
V450, V450X, H450, H700, VA700, VA1200
P5000, P5000L
V550, VA2400
Part #
M0525
M0535
M0650
M0865
TH’D
T
M5
M5
M6
M8
L
1.00
1.40
2.00
2.56
M1085,
M10
3.35
M12100
M16150,
M12
M16
4.00
6.00
Fits Models
H50
V75, H75, V100, CV75, V75X
V150, V200, H150, P200, P250, P350
V250, V300, CV250, P300, P550, P600,
P600L, P600X
V350, CV350, H350, P400, P450, P750,
P1200, P1200L, P1200X
V450, VA700, VA1200, H450, H700,V450X
V550, VA2400
Plain Spindles
T
L
Swivel Foot Spindles
T
Part #
TH’D
T
L
ØD
HA
Fits Models
MS0535
MS0650
MS0865
M5
M6
M8
1.4 12
2.0 12
2.56 20
10
10
13
MS1085
M10
3.35 20
15
MS12100
M12
4.0
25
20
MS16150
M16
6.0
45
30
H75, V100, V75, V75X
V150, V200, H150, P200, P250, P350
V250, V300, CV250, P300, P550, P600,
P600L, P600X
V350, CV350, H350, P400, P450, P750,
P1200, P1200L, P1200X
V450, VA700, VA1200, H45C, H700,
V450X
V550, VA2400
Part #
NTS0432
NTS0538
TH’D
T
M4
M5
L
1.25
1.50
NTS0645
M6
NTS0865
L
ØD
HA
Neoprene Tipped Spindles
T
LA
ØD ØDA
7
⁄16
3
⁄8
1
⁄2
1.75
1
⁄2
1
⁄2
5
⁄8
M8
2.56
5
⁄8
5
⁄8
7
⁄8
NTS1085
M10
3.34
3
⁄4
7
⁄8
11⁄16
NTS12100
M12
4.00
1
1
13⁄16
L
ØD
ØDA
LA
Fits Clamp Model
P50
H50, V75, H75, V100, CV75,
V75X
V150, V200, H150, P200, P250,
P350, V250, V300, CV250
P300, P550, P600, P600L,
P600X, V350, CV350
H350, P400, P450, P750, P1200,
P1200L, P1200X, V450, VA700
VA1200, H450, H700, V450X
27
72718 US Clamping 26-32.qxd:Layout 1
23/10/07
10:57
Page 28
Spindle Retainers - To Fit Spindles and Setscrews
To Fit Thread T
H
Part #
TH’D
T
H
W
Fits Clamp Models
With Type A Arm
R/08
R/10
R/12
R/16
M8
M10
M12
M16
⁄16
⁄8
11⁄32
11⁄4
15
⁄16
13⁄16
117⁄64
13⁄8
V250, H250, V300
V350, H350
V450, H450
V550
11
7
W
Neoprene Setscrew Covers
ØDA
H
Part #
H
HA
ØD
ØDA
Fits Screw
NC/04
NC/05
NC/06
NC/08
NC/10
NC/12
5
⁄16
3
⁄8
1
⁄2
19
⁄32
11
⁄16
25
⁄32
5
⁄32
5
⁄32
5
⁄32
1
⁄4
9
⁄32
9
⁄32
9
⁄32
7
⁄16
1
⁄2
1
⁄2
5
⁄8
3
⁄4
7
⁄16
1
⁄2
19
⁄32
3
⁄4
7
⁄8
11⁄32
MB0420
MB0525, MB0535
MB0650
MB0860
MB1080
MB1260, MB12100
HA
ØD
Neoprene Pads - To Fit Plain Spindles
Thread T
ØDA
H
ØD
Part #
TH’D
T
NP/05
NP/06
NP/08
NP/10
NP/12
M6
M8
M10
M12
H
HA
ØD
ØDA
⁄8
1
⁄2
11
⁄16
1
1
5
⁄64
1
⁄8
5
⁄32
5
⁄16
5
⁄16
7
⁄16
19
⁄32
13
⁄16
13
⁄16
15
3
⁄32
⁄8
⁄16
13⁄16
13⁄16
5
13
Fits Spindle
M0525, M0535
M0650
M0865
M1085
M12100
HA
Plastic Covers - To Fit Swivel Foot Spindles
ØD
H
28
Part #
ØD
H
Fits Spindle
NPS/05/06
NPS/08/10
NPS/12
5
⁄8
15
⁄16
13⁄16
⁄4
3
⁄8
3
⁄8
MS0535, MS0650
MS0865, MS1085
MS12100
1
72718 US Clamping 26-32.qxd:Layout 1
23/10/07
10:57
Page 29
Clamp Levers - External Thread and Plastic Handle
● Handle
in glass-fibre reinforced plastic with toothed wheel in die cast zinc, steel parts
quality class 5.8 or steel parts in stainless steel, 1.4305
● Steel black oxide surface finish or stainless steel natural finish
● Standard colours are anthracite gray RAL 7021 and orange RAL 2004
STAINLESS STEEL COMPONENTS
A1
D2
B
20º
H3 H4
H
H1 H2
(handle disengaged)
A
L
Item No
(inch)
Item No.
(metric)
Size
06610-1A0X
06610-1A1X
06610-1A2X
06610-2A2X
06610-2A3X
06610-2A4X
06610-3A3X
06610-3A4X
06610-4A5X
06610-5A6X
06610-105X
06610-106X
06610-206X
06610-208X
06610-210X
06610-308X
06610-310X
06610-412X
06610-516X
1
1
1
2
2
2
3
3
4
5
External Thread X*
(inch)
(metric)
10-24
10-32
1
⁄4-20
1
⁄4-20
5
⁄16-18
3
⁄8-16
5
⁄16-18
3
⁄8-16
1
⁄2-13
5
⁄8-11
M5
M6
M6
M8
M10
M8
M10
M12
M16
H1**
4
4
4
6.5
6.5
6.5
10
10
10
12
L = bolt length in mm
10
-
15
15
15
15
15
-
20
20
20
20
20
20
20
20
-
25
25
25
25
25
25
25
25
25
-
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
60
60
60
60
60
60
60
*Other external threads and screw lengths available on request **Dimension ‘H1’ available in other lengths at extra charge
X
D
D1
flat point to DIN 78
STEEL COMPONENTS
disengage
lifting
by
Item No
(inch)
Item No.
(metric)
Size
06610-1A0X
06610-1A1X
06610-1A2X
06610-2A2X
06610-2A3X
06610-2A4X
06610-3A3X
06610-3A4X
06610-4A4X
06610-4A5X
06610-5A5X
06610-5A6X
06610-105X
06610-106X
06610-206X
06610-208X
06610-210X
06610-308X
06610-310X
06610-410X
06610-412X
06610-512X
06610-516X
1
1
1
2
2
2
3
3
4
4
5
5
External Thread X*
(inch)
(metric)
10-24
10-32
1
⁄4-20
1
⁄4-20
5
⁄16-18
3
⁄8-16
5
⁄16-18
3
⁄8-16
3
⁄8-16
1
⁄2-13
1
⁄2-13
5
⁄8-11
H1**
M5
M6
M6
M8
M10
M8
M10
M10
M12
M12
M16
L = bolt length in mm
4
4
4
6.5
6.5
6.5
10
10
10
10
12
12
10
10
10
-
15
15
15
15
15
15
15
15
-
20
20
20
20
20
20
20
20
20
20
-
25
25
25
25
25
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
30
30
35
35
35
35
35
35
35
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
45
45
45
45
45
45
45
45
45
45
45
45
50
50
50
50
50
50
50
50
50
50
50
50
55
55
55
55
55
55
55
55
55
60
60
60
60
60
60
60
60
60
70
70
70
70
80
80
80
80
90
90
90
90
*Other external threads and screw lengths available on request **Dimension ‘H1’ available in other lengths at extra charge
Clamp Levers - Internal Thread and Plastic Handle
● Handle
in glass-fibre reinforced plastic with toothed wheel in die cast zinc, steel parts
quality class 5.8
● Steel parts black oxide surface finish
● Standard colours are anthracite gray RAL 7021 and orange RAL 2004
disengage
by
lifting
20º
H
H3 H4
T H2
(handle disengaged)
A
A1
B
D2
H1
X
D
D1
Inch
Metric
Item No.
(steel)
Item No.
(st. steel)
Item No.
(steel)
Item No.
(st. steel)
06600-1AE
06600-1A0
06600-1A1
06600-1A2
06600-2A2
06600-2A3
06600-3A3
06600-3A4
06600-4A4
06600-4A5
06600-5A5
06600-5A6
06601-1A0
06601-1A1
06601-1A2
06601-2A2
06601-2A3
06601-3A3
06601-3A4
06601-4A4
06601-4A5
06601-5A5
06601-5A6
06600-104
06600-105
06600-106
06600-206
06600-208
06600-308
06600-310
06600-410
06600-412
06600-512
06600-516
06601-105
06601-106
06601-206
06601-208
06601-308
06601-310
06601-410
06601-412
06601-512
06601-516
Size
1
1
1
1
2
2
3
3
4
4
5
5
External Thread
X*
(inch)
(metric)
8-32
10-24
10-32
1
⁄4-20
1
⁄4-20
5
⁄16-18
5
⁄16-18
3
⁄8-16
3
⁄8-16
1
⁄2-13
1
⁄2-13
5
⁄8-11
M4
M5
M6
M6
M8
M8
M10
M10
M12
M12
M16
T
D
D1
D2
H
H1**
H2
H3
H4
A
A1
B
No. of
teeth
(kg)
Approx
weight
9
9
9
9
12
12
14
14
17
17
23
23
10
10
10
10
13.5
13.5
16
16
19
19
23
23
13
13
13
13
18
18
21.5
21.5
25.5
25.5
30
30
14.5
14.5
14.5
14.5
19.5
19.5
23
23
27.5
27.5
32.5
32.5
24.5
24.5
24.5
24.5
28.5
28.5
37
37
43
43
49
49
4
4
4
4
6.5
6.5
10
10
10
10
12
12
15
15
15
15
17.5
17.5
24
24
26
26
33
33
30
30
30
30
41.5
41.5
53.5
53.5
61
61
72
72
33.5
33.5
33.5
33.5
45.5
45.5
58
58
66
66
77
77
40
40
40
40
65
65
80
80
95
95
110
110
47
47
47
47
75
75
91.5
91.5
109
109
126
126
7.5
7.5
7.5
7.5
9.5
9.5
11
11
13
13
15.5
15.5
16
16
16
16
20
20
22
22
24
24
26
26
0.013
0.013
0.013
0.013
0.030
0.030
0.052
0.052
0.082
0.082
0.136
0.136
*Other inserts available on request **Dimension ‘H1’ available in other lengths at extra charge
29
72718 US Clamping 26-32.qxd:Layout 1
23/10/07
10:57
Page 30
Clamp Levers - External Thread
● Handle
in die cast zinc to DIN 1743, steel parts quality class 5.8 or steel parts in stainless
steel, 1.4305
● Plastic coated handle and steel black oxide surface finish or stainless steel natural finish
● Standard colours are black satin finish and Orange RAL 2004
● Other colours available on request
STAINLESS STEEL COMPONENTS
Inch
H3 H4
H
H2
H1
L
(handle disengaged)
A
A1
X
D
D1
flat point to DIN 78
D2
B
Metric
Size External Thread
X*
Item No
(black satin)
Item No.
(orange)
Item No.
(black satin)
Item No.
(orange)
06461-1A01X
06461-1A11X
06461-1A21X
06461-2A21X
06461-2A31X
06461-2A41X
06461-3A31X
06461-3A41X
06461-4A51X
06461-5A61X
06461-1A02X
06461-1A12X
06461-1A22X
06461-2A22X
06461-2A32X
06461-2A42X
06461-3A32X
06461-3A42X
06461-4A52X
06461-5A62X
06461-1051X
06461-1061X
06461-2061X
06461-2081X
06461-2101X
06461-3081X
06461-3101X
06610-4121X
06610-5161X
06461-1052X
06461-1062X
06461-2062X
06461-2082X
06461-2102X
06461-3082X
06461-3101X
06610-4122X
06610-5162X
1
1
1
2
2
2
3
3
4
5
L = bolt length in mm
(inch)
(metric)
10-24
10-32
1
⁄4-20
1
⁄4-20
5
⁄16-18
3
⁄8-16
5
⁄16-18
3
⁄8-16
1
⁄2-13
5
⁄8-11
M5
M6
M6
M8
M10
M8
M10
M12
M16
10
-
15
15
15
15
15
-
20
20
20
20
20
20
20
20
-
25
25
25
25
25
25
25
25
25
-
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
60
60
60
60
60
60
60
55
55
55
55
55
55
55
55
55
60
60
60
60
60
60
60
60
60
70
70
70
70
- 80 90
80 90
80 90
80 90
*Other external threads and screw lengths available on request
STEEL COMPONENTS
disengage
by
lifting
Inch
Item No.
(black satin)
06460-1A01X
06460-1A11X
06460-1A21X
06460-2A21X
06460-2A31X
06460-2A41X
06460-3A31X
06460-3A41X
06460-4A51X
06460-4A51X
06460-5A51X
06460-5A61X
Metric
Size
Item No.
(orange)
Item No.
(black satin)
Item No.
(orange)
06460-1A02X
06460-1A12X
06460-1A22X
06460-2A22X
06460-2A32X
06460-2A42X
06460-3A32X
06460-3A42X
06460-4A52X
06460-4A52X
06460-5A52X
06460-5A62X
06460-1051X
06460-1061X
06460-2061X
06460-2081X
06460-2101X
06460-3081X
06460-3101X
06460-4101X
06460-4121X
06460-5121X
06460-5161X
06460-1052X
06460-1062X
06460-2062X
06460-2082X
06460-2102X
06460-3082X
06460-3102X
06460-4102X
06460-4122X
06460-5122X
06460-5162X
1
1
1
2
2
2
3
3
4
4
5
5
External Thread
X*
H1**
L = bolt length in mm
(inch)
(metric)
10-24
10-32
1
⁄4-20
1
⁄4-20
5
⁄16-18
3
⁄8-16
5
⁄16-18
3
⁄8-16
3
⁄8-16
1
⁄2-13
1
⁄2-13
5
⁄8-11
M5
M6
M6
M8
M10
M8
M10
M10
M12
M12
M16
4
4
4
6.5
6.5
6.5
10
10
10
10
12
12
10
10
10
-
15
15
15
15
15
15
15
15
-
20
20
20
20
20
20
20
20
20
20
-
25
25
25
25
25
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
30
30
35
35
35
35
35
35
35
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
45
45
45
45
45
45
45
45
45
45
45
45
50
50
50
50
50
50
50
50
50
50
50
50
*Other external threads and screw lengths available on request **Dimension ‘H1’ available in other lengths at extra charge
Clamp Levers - Internal Thread
● Handle
in die cast zinc to DIN 1743, steel parts quality class 5.8
Plastic coated handle and steel black oxide surface finish
● Standard colours are black satin finish and orange RAL 2004
● Other colours available on request
●
disengage
by
lifting
H3 H4
H
H1
T H2
(handle disengaged)
A
A1
B
D2
X
D
D1
Inch
Metric
Item No.
(black satin)
Item No.
(orange)
Item No.
(black satin)
Item No.
(orange)
06450-1041
06450-1051
06450-1061
06450-2061
06450-2081
06450-3081
06450-3101
06450-4101
06450-4121
06450-5121
06450-5161
06450-1042
06450-1052
06450-1062
06450-2062
06450-2082
06450-3082
06450-3102
06450-4102
06450-4122
06450-5122
06450-5162
06450-1AE1
06450-1A01
06450-1A11
06450-1A21
06450-2A21
06450-2A31
06450-3A31
06450-3A41
06450-4A41
06450-4A51
06450-5A51
06450-5A62
06450-1AE2
06450-1A02
06450-1A12
06450-1A22
06450-2A22
06450-2A32
06450-3A32
06450-3A42
06450-4A42
06450-4A52
06450-5A52
06450-5A61
Size
1
1
1
1
2
2
3
3
4
4
5
5
External Thread
X*
(inch)
(metric)
M4
M5
M6
M6
M8
M8
M10
M10
M12
M12
M16
8-32
10-24
10-32
1
⁄4-20
1
⁄4-20
5
⁄16-18
5
⁄16-18
3
⁄8-16
3
⁄8-16
1
⁄2-13
1
⁄2-13
5
⁄8-11
*Other inserts available on request **Dimension ‘H1’ available in other lengths at extra charge
30
T
D
D1
D2
H
H1**
H2
H3
H4
A
A1
B
No. of
teeth
Approx
weight
(kg)
9
9
9
9
12
12
14
14
17
17
23
23
10
10
10
10
13.5
13.5
16
16
19
19
23
23
13
13
13
13
18.5
18.5
21
21
27
27
31
31
14
14
14
14
19
19
22
22
27.5
27.5
32
32
24.5
24.5
24.5
24.5
28.5
28.5
37
37
43
43
49
49
4
4
4
4
6.5
6.5
10
10
10
10
12
12
14.5
14.5
14.5
14.5
17.5
17.5
24
24
27
27
31.5
31.5
31
31
31
31
42.5
42.5
54.5
54.5
63
63
73
73
34
34
34
34
45.5
45.5
58.5
58.5
67.5
67.5
77.5
77.5
40
40
40
40
65
65
80
80
95
95
110
110
47
47
47
47
74.5
74.5
91
91
109
109
126
126
7
7
7
7
9.5
9.5
11
11
13
13
15
15
16
16
16
16
20
20
22
22
24
24
26
26
0.040
0.040
0.040
0.040
0.090
0.090
0.130
0.130
0.210
0.210
0.330
0.330
72718 US Clamping 26-32.qxd:Layout 1
23/10/07
10:57
Page 31
INDEX
ACCESSORIES
Clamp Levers ................................. 29-30
Flanged Washers............................ 26
Front Mounting Brackets................ 26
Mounting Brackets......................... 26
Neoprene Setscrew Covers............ 28
Neoprene Spindle Pads.................. 28
Neoprene Tipped Spindles ............. 27
P Series Base Accessory................ 18
Plain Spindles................................ 27
Plastic Grips................................... 25
Plastic Spindle Covers....................28
Setscrews ...................................... 27
Spindles Retainers......................... 28
Stroke Sensing Kit ......................... 22
Swivel Foot Spindles...................... 27
VA S and T Series Arm
Accessory.......................................25
VA Series Base Accessory.............. 26
VA Series Grip................................ 25
VA Series Handle............................ 25
BODY & PIN LOCATION CLAMPS
BC25.0........................................... 10
BC40.0........................................... 10
PC25.0........................................... 10
PC35.0........................................... 10
PC40.0........................................... 10
CAM PUSH/CAM PULL CLAMPS
CP1005.......................................... 22
CP1006.......................................... 22
CP1007.......................................... 22
CP1008.......................................... 22
HEAVY-DUTY CAM CLAMPS
CP1500.......................................... 23
CP1500L........................................ 23
CP2000.......................................... 23
CP2000L........................................ 23
CP3000.......................................... 23
CP3000L........................................ 23
CR4000.......................................... 23
CR5000.......................................... 23
CS300............................................ 23
CS800............................................ 23
CS1200.......................................... 23
HEAVY-DUTY CLAMP MECHANISMS
VA300S.......................................... 11
VA3002S........................................ 11
VA300T........................................... 11
VA700S.......................................... 11
VA700T........................................... 11
VA700TD........................................ 12
VA1200S........................................ 11
VA1200T......................................... 11
VA1200TD...................................... 12
VA2400S........................................ 11
VA2400T......................................... 11
HEAVY-DUTY & LONG HANDLED
PUSH-PULL CLAMPS
P600.............................................. 17
P600L............................................ 17
P1200............................................ 17
P1200L.......................................... 17
P2500............................................ 17
P2500L.......................................... 17
P5000.............................................17
P5000L...........................................17
PNEUMATIC SWING CLAMPS
PNS32-10A.................................... 20
PNS32-10C.................................... 20
PNS40-20A.................................... 20
PNS40-20C.................................... 20
PNS50-20A.................................... 20
PNS50-20C.................................... 20
PNS63-20A.................................... 20
PNS63-20C.................................... 20
P1200XPR..................................... 21
P2500XPR......................................21
PNPR1........................................... 21
PNDP1........................................... 21
RPP1............................................. 21
RPP2............................................. 21
TPR1............................................. 21
TPR2............................................. 21
TPR3............................................. 21
HEAVY-DUTY VERTICAL CLAMPS
VA300/1B....................................... 12
VA300/2B....................................... 12
VA300/2BT..................................... 11
VA700/1A....................................... 13
VA700/2C....................................... 13
VA1200/1A..................................... 13
VA1200/2C..................................... 13
VA2400/1A..................................... 13
VA2400/2C..................................... 13
PNEUMATIC VERTICAL &
PUSH-PULL CLAMPS
P600X............................................ 20
P1200X.......................................... 20
P2500X.......................................... 20
V75X.............................................. 20
V150X............................................ 20
V250X............................................ 20
V450X............................................ 20
VERTICAL CAM CLAMPS
CV75............................................. 8
CV250........................................... 8
CV350........................................... 8
HOOK CLAMPS
LH200, LH200SS............................16
LH400, LH400SS............................16
LH700, LH700SS............................16
PNEUMATIC VERTICAL SLIM-LINE TOGGLE
CLAMPS
V100VX.......................................... 19
V200VX.......................................... 19
V300VX.......................................... 19
HEAVY-DUTY PNEUMATIC
TOGGLE CLAMPS
VA300BX........................................ 20
VA700CX........................................ 20
VA1200CX...................................... 20
VA2400CX...................................... 20
HORIZONTAL CLAMPS
H50/1B........................................... 14
H50/2B, H50/2BSS......................... 14
H50/2C........................................... 15
H75/1B, H75/1BSS......................... 14
H75/2B, H75/2BSS......................... 14
H75/1C........................................... 15
H75/2C........................................... 15
H100/2B......................................... 14
H150/1B, H150/1BSS..................... 14
H150/2B, H150/2BSS..................... 14
H150/1C......................................... 15
H150/2C......................................... 15
H200/2B......................................... 14
H250/1A......................................... 13
H250/1AL....................................... 13
H250/2A......................................... 14
H250/2AL....................................... 14
H250/1B......................................... 14
H250/2B......................................... 14
H300/2B......................................... 14
H350/1A......................................... 13
H350/2A......................................... 14
H350/1B......................................... 14
H350/2B......................................... 14
H450/1A......................................... 13
H450/2A......................................... 14
H450/1B......................................... 14
H450/2B......................................... 14
H700.............................................. 14
LATCH CLAMPS
LU200H, LU200HSS.......................16
LU200V, LU200VSS........................16
LU400H, LU400HSS.......................16
LU400V, LU400VSS........................16
LU700H, LU700HSS.......................16
LU700V, LU700VSS........................16
LU2000H........................................ 16
LU4000H........................................ 16
PNEUMATIC POWER CLAMPS
BPC 25........................................... 19
BPC 32........................................... 19
POSITIVE LOCKING CLAMPS
H350/1BLC....................................
H350/2BLC....................................
V250/1BLC....................................
V250/2BLC....................................
V250/3BLC....................................
V350/1BLC....................................
V350/2BLC....................................
15
15
9
9
9
9
9
PULL-BACK CLAMPS
TC79.............................................. 24
TC345............................................ 24
PUSH-PULL CLAMPS
P50, P50SS................................... 17
P100, P100SS............................... 17
P200, P200SS............................... 17
P250.............................................. 17
P350.............................................. 17
P400, P400SS............................... 17
P450.............................................. 17
P550.............................................. 17
P750.............................................. 17
P1150............................................ 17
P1150L.......................................... 17
P2250............................................ 18
P2250L.......................................... 18
SP700............................................ 18
SWING CLAMPS & SWING CLAMP
ASSEMBLIES
1015-08......................................... 24
1015-10......................................... 24
1015-12......................................... 24
1015-16......................................... 24
1016-08......................................... 24
1016-10......................................... 24
1016-12......................................... 24
1016-16......................................... 24
TOGGLE PRESSES
P600PR.........................................
P1200PR.......................................
P2500PR.......................................
P600XPR.......................................
21
21
21
21
VERTICAL CLAMPS
V70/2BT, V70/2BTSS.....................
V75/1B..........................................
V75/2B, V75/2BSS........................
V100/1B........................................
V100/1C........................................
V100/2B........................................
V100/2C........................................
V100/3B........................................
V100/3C........................................
V150/1B,V150/1BSS.....................
V150/1BL......................................
V150/1C........................................
V150/2B, V150/2BSS....................
V150/2BL......................................
V150/2C........................................
V200/1B........................................
V200/1C........................................
V200/2B........................................
V200/2C........................................
V200/3B........................................
V200/3C........................................
V250/1A........................................
V250/1AL......................................
V250/1B, V250/1BSS....................
V250/1C........................................
V250/2A........................................
V250/2AL......................................
V250/2B,V250/2BSS.....................
V250/2C........................................
V300/1A........................................
V300/1B........................................
V300/1C........................................
V300/3A........................................
V300/3B........................................
V300/3C........................................
V350/1A........................................
V350/1B........................................
V350/1C........................................
V350/2A........................................
V350/2B........................................
V350/2C........................................
V450/1A........................................
V450/1B........................................
V450/1C........................................
V450/2A........................................
V450/2B........................................
V450/2C........................................
V550/1A........................................
V550/1B........................................
V550/1C........................................
V550/2A........................................
V550/2B........................................
V550/2C........................................
9
6
7
6
6
7
7
8
8
6
6
6
7
7
7
6
6
7
7
8
8
6
6
6
6
7
7
7
7
6
6
6
8
8
8
6
6
6
7
7
7
6
6
6
7
7
7
6
6
6
7
7
7
31
72718 US Clamping 26-32.qxd:Layout 1
23/10/07
13:32
Page 32
Manufacturers of WHEELS AND CASTORS
See our web site for the full product range, including stainless steel models.
WG Series
Special Pivoting Castors
Steel Flat Tread
Rail Wheels
Polyurethane Press-on Band
Tyred Wheels
Polyurethane Tyred Wheels
Polyurethane Tyred Single
Flanged Rail Wheels
Steel Single Flanged
Rail Wheel
Single Flanged ‘I’ Beam &
Channel Wheels
Steel Double Flanged
Rail Wheels
For further details contact
TEL: 586 427 5304 FAX: 586 427 5305
E-mail: sales@brauerclampsusa.com Web: www.brauerclampsusa.com
72718 US Clamping Cover.qxd:Layout 2
23/10/07
11:00
Page IBC1
Manufacturers of AIRMOVERS
See our web site for the full product range, including stainless steel models.
AM10
AM35
AM40
AM75
Fixed Gap Airmovers
Fixed Gap Airmover
Fixed Gap Airmover
Fixed Gap Airmover
MATERIALS: Zinc Alloy
I.D. 10mm
WEIGHT: 0.100Kg
STANDARD GAP: 0.05mm
MATERIALS: Zinc Alloy & Alumin.
I.D. 35mm
WEIGHT: 0.19Kg
STANDARD GAP: 0.05mm
MATERIALS: Zinc Alloy
WEIGHT: 0.9Kg
STANDARD GAP: 0.05mm
MATERIALS: Zinc Alloy
WEIGHT: 2.7Kg
STANDARD GAP: 0.05mm
AM125
AM20A
AM35A
SS10A
Fixed Gap Airmovers
Adjustable Airmover
Adjustable Airmover
Stainless Steel Airmover
MATERIALS: Aluminium Alloy
I.D. 125mm
WEIGHT: 7.55Kg
STANDARD GAP: 0.15mm
AA10A - Acetal
Adjustable Airmover
MATERIALS: Acetal Copolymer
I.D. 10mm
WEIGHT: 0.05Kg
STANDARD GAP: Adjustable
MATERIALS: Aluminium Alloy
I.D. 20mm
WEIGHT: 0.13Kg
STANDARD GAP: Adjustable
Ring Blade
MATERIALS: Aluminium & S.steel
STANDARD GAP: 0.05mm
DBA at: 5.5 bar is 80
CG4
AG32LC
Cold Air Gun
Blow Gun
MATERIALS: Stainless Steel
WEIGHT: 1.7Kg
DBA at: 5.5 bar is 80
MATERIALS: Aluminium alloy
WEIGHT: 0.54Kg
STANDARD GAP: Adjustable
MATERIALS: Aluminium Alloy
I.D. 35mm
WEIGHT: 0.28Kg
STANDARD GAP: Adjustable
MATERIALS: Stainless Steel
I.D. 10mm
WEIGHT: 0.13Kg
STANDARD GAP: Adjustable
EV8
DP175
Extractor Ventilator
Liquid Drum Pump
MATERIALS: GRP
WEIGHT: 7Kg
DBA at: 5.5 bar is 75
AG32LC - Strip
(Air Curtain) Airmover
MAT.: Alumin./Zinc plated steel
WEIGHT: 0.3Kg
STANDARD GAP: 0.05-0.10mm
MATERIALS: Stainless Steel/Nylon
WEIGHT: 1.6Kg
DBA at: 5.5 bar is 92
Airmiser Nozzles
MATERIALS: Aluminium alloy
WEIGHT: 0.025Kg
STANDARD GAP: 0.15
For further details contact
TEL: 586 427 5304 FAX: 586 427 5305
E-mail: sales@brauerclampsusa.com Web: www.brauerclampsusa.com
72718 US Clamping Cover.qxd:Layout 2
23/10/07
11:00
Page 1
OTHER
®
PRODUCTS
H M C
WHEELS AND
CASTORS
B R A U E R
–
W H E E L S
A N D
C A S T O R S
www.brauer.co.uk
TEL: 586 427 5304 FAX: 586 427 5305
E-mail: sales@brauerclampsusa.com
Web: www.brauerclampsusa.com
Authorised Dealer stamp
10/07 EXPORT
To request one of the above
catalogues please contact