louis
poulsen
Instruction No.: 1440331000
Munkegaard Mega
Design:Arne Jacobsen
120/277V
T-5 2GX13
18 Lbs
Wipe off dust with a dry, soft cloth.
Remove greasy spots with a mild detergent.
Wring the cloth thoroughly before use.
Never use detergents containing alcohol.
All installation is subject to local code and
jurisdiction.
This product must be installed in accordance with
the applicable installation code by a person
familiar with the construction and operation of the
product and the hazards involved.
Damp Location
Grounded
Headoffice
Denmark
Louis Poulsen Lighting
A/S.
Tel: +45 33 14 14 14
Fax: +45 33 14 60 62
www.louis-poulsen.dk
Export Division
Louis Poulsen Lighting
A/S.
Tel: +45 33 31 11 66
Fax: +45 33 29 86 46
France
Louis Poulsen & Cie
Tel: +33 1 49 59 68 68
Fax: +33 1 49 59 68 69
www.louis-poulsen.fr
Holland
Louis Poulsen B.V.
Tel: +31 23 5650030
Fax: +31 23 5652284
www.louis-poulsen.nl
Norway
Louis Poulsen & Co. A/S
Tel: +47 22 50 20 20
Fax: +47 22 52 47 05
www.louis-poulsen.no
Switzerland
Louis Poulsen AG
Tel: +41 1 733 70 40
Fax: +41 1 733 70 50
www.louis-poulsen.ch
Denmark
Frontdesk
Tel: +45 33 31 11 66
Fax: +45 33 29 86 45
Finland
Louis Poulsen Oy
Tel: +358 9 6226 760
Fax: +358 9 6226 7650
www.louispoulsen.fi
Germany
Louis Poulsen & Co.
GmbH
Tel: +49 2103 940 0
Fax: +49 2103 940 290
www.louis-poulsen.de
Japan
Louis Poulsen Japan KK
Tel: +81 3 3586 5341
Fax: +81 3 3586 0478
Sweden
Louis Poulsen & Co. AB
Tel: +46 8 446 48 00
Fax: +46 8 446 48 28
www.louispoulsen.se
United Kingdom
Louis Poulsen UK Ltd.
Tel: +44 1372 848 800
Fax: +44 1372 848 801
www.louis-poulsen.co.uk
USA
Louis Poulsen Lighting,
Inc.
Tel: +1 954-349-2525
Fax: +1 954-349-2550
www.louispoulsen.com
SUPPORT THE HOUSING ON THE T-BAR OR
JOISTS BY MEANS OF THE BRACKETS PROVIDED.
ADJUST THE HEIGHT OF THE HOUSING AS
NEEDED BY MOVING THE BRACKETS, SO
THAT THE FIXTURE FLANGE IS FLUSH WITH
THE CEILING.
WARNING:
RISK OF FIRE. DO NOT INSTALL INSULATION
WITHIN 3 INCHES OF FIXTURE SIDES OF
WIRING COMPARTMENT/OR ABOVE FIXTURE
IN SUCH A MANNER TO ENTRAP HEAT.
SECURE THE “L”-BRACKETS TO THE
“T”-BAR OR JOIST TO PREVENT THE
HOUSING FROM TURNING
L. BRACKET
BRING THE INSTALLATION WIRE
INTO THE WIRING COMPARTMENT
BY MEANS OF FLEXIBLE CONDUIT
MAKE THE ELECTRICAL CONNECTIONS
AS FOLLOWS:
NOTE:
MAKE SURE ALL WIRES ARE PUSHED
INSIDE THE SPLICEBOX TO PREVENT
ANY PINCHING OF WIRES OR
ELECTRICAL SHORTS.
FLEXIBLE
CONDUIT
WIRING
COMPARTMENT
N: NEUTRAL=WHITE
G: GROUND=GREEN
L: LINE=BLACK
SECURE THE MOUNTING PAN TO THE HOUSING
WITH TWIST AND LOCK METHOD.
HOUSING
MOUNTING
PAN
INSTALL THE LIGHT SOURCES
SECURE THE GLASS FRAME BY FEEDING
THE SUSPENSION CABLE THROUGH THE
TRIM AND FASTEN THE OTHER END TO
THE HOUSING.
NOW THE GLASS CAN BE SUSPENDED
BY THE CABLE DURING RELAMPING.
WARNING - IF YOUR UNIT HAS EMPK, DO NOT
MATE EMPK CONECTOR UNTILL INSTALLATION IS
COMPLETE AND AC POWER IS SUPPLIED.
MOUNT THE GLASS FRAME
TO THE FIXTURE BY TURNING
IT CLOCKWISE UNTIL IT STOPS