Designed and
Manufactured
in Germany
Specification
Oscillator type:
Rev.: 3
Date: 2015-02-17
AXIOM210
Ultra-Low Phase Noise OCXO in Vibration-isolated Package
Parameter
Frequency range
Standard frequencies
Frequency stability
Initial tolerance @+25°C
vs. operating temperature range
vs. supply voltage variation (pushing)
Long term (aging) per day
Long term (aging) per year
Frequency adjustment range
Electronic Frequency Control (EFC)
EFC voltage VC
EFC slope (∆f / ∆VC)
EFC input impedance
RF output
Signal waveform
Load RL
Output level
Harmonics
Spurious at rest
Phase noise at rest
Phase noise under random vibration
Warm-up time @ +25°C
Supply voltage VS
Current consumption (steady state)
Current consumption (warm-up)
Operating temperature range
Enclosure (see drawings) (LxWxH)
Weight
Notes:
1.
2.
3.
4.
min.
typ.
max. Unit
50
130
100.000 / 120.000
MHz
MHz
±300
±200
±10
±2
±100
ppb
ppb
ppb
ppb
ppb
9
ppm
V
±100
±1
1
±2
5
Positive
100
Condition
@ VC = 5V
steady state (Note 2)
VS ±5%
after 30 days operation
after 30 days operation
kΩ
Sine wave
50
+7
-40
-30
-90
Ω
dBm
dBc
dBc
See table 1
See table 2
5
12.6
300
500
+85
min
V
mA
mA
°C
50.0x50.0x30.0 max.
200
mm
g
11.4
12.0
-40
±5%
Option 2
Option 3
∆ffinal/f0 < ±0.1 ppm
(Note 3)
@ +25°C
(Note 2)
Option 1 “H” or “S” (Note 4)
Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated
Other stability and temperature range on request
Other supply voltage on request
Other enclosure height on request. Please consult factory
Absolute Maximum Ratings
Parameter
min.
max.
Supply Voltage VS
Control Voltage VC
Storage Temperature
-0.5
-0.5
-55
VS + 10%
15
+125
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM210 Rev.3
Drawing D0
Page 1(6)
Unit
Condition
V
V
°C
VS to GND
VC to GND
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: info@axtal.com
Designed and
Manufactured
in Germany
Phase Noise – Option 2:
Offset
10 Hz
100 Hz
1 kHz
10 kHz
≥100 kHz
Table 1
A
-90
-125
-155
-165
-175
B
-95
-130
-158
-168
-175
100 MHz
C
-97
-132
-160
-170
-175
D
-100
-135
-162
-172
-175
E
-105
-137
-164
-174
-175
A
-85
-118
-148
-160
-175
B
-90
-122
-150
-165
-175
120 MHz
C
-95
-125
-153
-168
-175
D
-97
-127
-155
-170
-175
E
-100
-130
-157
-172
-175
Unit
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Vibration sensitivity – Option 3:
Option
Phase noise @ 1 kHz *
140
145
150
155
Table 2
Unit
-140
dBc/Hz
-145
dBc/Hz
-150
dBc/Hz
-155
dBc/Hz
* see vibration profile below
Vibration profile
PSD = 0.02 g²/Hz according to RTCA/DO160E Curve C
Functional test: 1 hour each direction
Endurance test: 3 hours each direction at 2 times the PSD level of the functional test
Notes: - Other vibration profiles on request (max. PSD = 0.04 g²/Hz for fVIBRATION < 15 Hz)
- Available enclosure height depends on vibration profile
Ordering Code
Option 1
Option 2
Option 3
Revision
[Package]
[Phase noise] [Vibration sensitivity]
AXIOM210
“H” or “S”
Table 1
Table 2
Rev.3
Example: AXIOM210H-A-140_Rev.3 – 100.000 MHz
Model
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM210 Rev.3
Drawing D0
Page 2(6)
Frequency [MHz]
100.000
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: info@axtal.com
Designed and
Manufactured
in Germany
Phase noise response under random vibration at 100 MHz
Typical phase noise response for vibration sensitivity option “155”
Vibration orientation
Handling and Testing
Parameter
Handling and Testing
Processing
Parameter
Electrostatic discharge (ESD)
THD devices
SMD devices
Washable
RoHS- Compliant
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
Procedure
Application Note AXAN-011
Application Note AXAN-012
Procedure
IEC60749-26
IEC60749-27
Yes
Yes
AXIOM210 Rev.3
Drawing D0
Page 3(6)
HBM
MM
No
No
Source
www.axtal.com
www.axtal.com
Condition
2000 V
200 V
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: info@axtal.com
Designed and
Manufactured
in Germany
Enclosure drawings
Package Option H “Threaded Holes”
Pin connections:
Pin # Symbol
1
VS
2
GND
3
VC
SMA RF OUT
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM210 Rev.3
Drawing D0
Page 4(6)
Function
Supply Voltage
Ground
Control Voltage (EFC)
RF Output
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: info@axtal.com
Designed and
Manufactured
in Germany
Package Option S “Threaded Studs”
Pin connections:
Pin # Symbol
1
VS
2
GND
3
VC
SMA RF OUT
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXIOM210 Rev.3
Drawing D0
Page 5(6)
Function
Supply Voltage
Ground
Control Voltage (EFC)
RF Output
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: info@axtal.com
Designed and
Manufactured
in Germany
Environmental conditions
Test
Sealing tests
(if applicable)
Solderability
Resistance to
soldering heat
Shock*
IEC
60068
Part …
2-17
IEC
60679-1
Clause
5.6.2
MIL-STD202G
Method
112E
2-20
2-58
5.6.3
208H
210F
2-27
5.6.8
213B
Vibration,
2-6
5.6.7.1
201A
sinusoidal*
204D
Vibration,
2-64
5.6.7.3
214A
random*
Endurance tests
108A
- ageing
5.7.1
- extended aging
5.7.2
Other environmental conditions on request
MIL-STD810F
Method
MIL-PRF55310D
Clause
3.6.1.2
3.6.52
3.6.48
516.4
3.6.40
516.4-4
3.6.38.1
3.6.38.2
3.6.38.3
3.6.38.4
514.5
4.8.35
Test conditions (IEC)
Gross leak: Test Qc,
Fine leak: Test Qk
Test Ta Method 1
Test Td1 Method 2
Test Td2 Method 2
Test Ea, 3 x per axes 100g,
6 ms half-sine pulse
Test Fc, 30 min per axes,
10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g
Test Fdb
30 days @ 85°C, OCXO @25°C
1000h, 2000h, 8000h @85°C
Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice.
Revision History
Rev.
Drawing
Date
[dd.mm.yyyy]
1
2
D0
D0
25.11.2013
17.07.2014
3
D0
17.02.2015
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
Remarks
First issue
New enclosure drawing with changed package height,
various parameters and environmental conditions
updated, editorial changes
Package options added (replaces AXIOM200)
AXIOM210 Rev.3
Drawing D0
Page 6(6)
Author
Checked
HH
HH
BN
HH
HH
HH
www.axtal.com
fon: +49 (6261) 939834
fax: +49 (6261) 939836
E-mail: info@axtal.com