Manual Awning
Product No. 088-1305-2
Assembly Instructions
Toll-free: 1-877-483-6759
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
3
Important Safety Instructions
3
Packaging Contents
4
Key Parts Diagram
4
Assembly
5-9
Cleaning and Maintenance
10
Technical Data
10
Warranty
11
Warning! To reduce the risk of serious injury, read the following safety instructions before
assembling and using the awning.
Caution! Always keep children under close supervision while they are playing around this product.
Never leave children unattended. Keep pets away while setting up the awning.
Caution! Check municipal by-laws prior to setting up the awning.
It is recommended to install the product on concrete walls. If it is necessary to install the product on a brick
wall, install the expanding bolts directly in the bricks without using the mortar. Other types of surfaces, e.g.
wood or plasterboard, are not strong enough to support this product. This product is not stable enough to be
installed on these surfaces, especially in windy, rainy, or snowy conditions.
• Never use the product in extreme weather conditions. This could cause damage to property and/or injury to the
user.
• Before installation, make sure there is enough space to extend the awning without any obstructions.
• At least 3 adults are needed for the installation.
• Install this product at a minimum height of 2.5 m (8') above the ground.
• When working at a larger height, always use a suitable ladder.
• Keep the product’s fabric away from fire sources and flammable objects.
• Do not place any heavy objects on top of the fabric while the awning is extended.
• Check the product regularly to make sure all bolts and nuts are securely tightened. If any loose joints are found,
tighten them immediately.
• Do not use the awning while cleaning it or when performing maintenance on surrounding windows or doors.
• Never use replacement parts and hardware which are not recommended by the manufacturer. They could pose
a safety risk to the user and might cause damage to the product. Only use original parts and hardware.
• Retain the original packaging to store the product.
• Please store the product in a dry and clean area.
• Use a clean cloth to remove any manufacturing residues from the product before first use. Use a damp cloth for
cleaning the product on a regular basis.
Imported for Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
Important Safety Instructions
Table of Contents
Table of Contents
3
5
Product No. 088-1305-2
1
C
Crank wand - 1
Spring washer - 4
2
D
Wall bracket - 2
Nut - 4
3
E
Awning frame - 1
Lead sleeve - 4
A
F
Expansion bolt - 4
Fastening bolt set - 2
B
G
Flat washer - 4
Drill bit - 1
Key Parts Diagram
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-877-483-6759
If you have questions regarding your product, require warranty assistance,
or have damaged or missing parts, please call our customer service toll-free helpline.
Contact us for assistance; we’re here to help.
Parts list
3
5
6
7
9
4
1
8
10
13
2
Caution!
• Proper placement of your awning is essential. Do not place the product underneath
electrical lines.
• Keep children away during assembly. This product contains small parts which can be
swallowed by children.
• While assembling the awning, avoid placing fingers in any areas where they can be
pinched or trapped.
• Do not attempt to assemble the awning if any part is missing.
11
13 12
1
2
Crank wand
3
4
Awning frame
5
Supporting bar
6
Fabric
7
Right arm
8
Valance
9
Front bar
10
Level
11
Easy angle system
12
Jack bolt
13
Locking nut
Wall bracket
Left arm
IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of product,
make sure all parts are present. Compare parts with packaging contents list. If any part is missing, or if you have
any questions, contact the service centre at 1-877-483-6759 (toll-free).
Take all parts from the packaging box and position them on a clean floor. Remove all packing materials and place
them back into the box. Do not dispose of the packing materials until assembly is complete. Read each step
carefully before beginning any assembly and make sure you understand each step. If any part is missing, please
call our toll-free number for assistance: 1-877-483-6759.
Needed for assembly:
3 People
Pencil
Tape measure
Drill
Ladder
Assembly
Packaging Contents
4
7
Product No. 088-1305-2
Step 1
Caution!
• Before drilling, ensure there are no electrical wires or water pipes behind the drill spots.
• It is recommended to wear protective goggles and hearing protection while drilling the
holes.
• Choose an appropriate place on the wall at least 2.5 m ( 8' ) above the ground.
• Mark the chosen height on both sides with a pencil and draw a horizontal line connecting the points.
Assembly
Step 3
Requires A, E, G
≥ 2.5 m (8')
• Drill two holes on the marked locations using the drill bit (included) (G). Make sure the holes are deeper than
the length of the lead sleeves (E).
• Insert the expanding bolts (A) into the lead sleeves (E).
• Insert the expanding bolts with the lead sleeves inside the drilled holes, using a hammer if necessary.
While inserting the bolt, make sure the bolt head faces the drilled hole.
A
E
G
Step 2
• Choose two locations on the horizontal line on the wall where the wall brackets need to be fixed.
• Mark the locations corresponding to each bracket.
G
≥ 2.5 m (8')
A
E
Step 4
Requires B, C, D
• Align the holes of the wall brackets with the threads of the expanding bolts.
• Mount the wall brackets onto the expanding bolts.
• Secure the wall brackets in place using the flat washers (B), spring washers (C) and nuts (D).
B
C
D
B
Caution!
Install the wall brackets with hinges facing out. If not, the awning cannot
be retracted fully.
D
C
Assembly
6
9
Product No. 088-1305-2
Step 5
Requires 2, 5
With the help of some persons, lift the awning and place the supporting bar (5) within the protrusions of the wall
brackets (2).
Step 7
Requires 1
• Insert the crank wand (1) into the crank loop.
• The awning is installed and ready for use.
1
Assembly
2
Assembly
8
5
2
1
Note: If the supporting bar cannot be easily fitted to the wall brackets, slightly lift the front side of the awning.
Step 8
Requires 1
Turn the crank wand (1) clockwise to extend the fabric and anti-clockwise to retract the fabric.
Step 6
Requires 2, F
1
Secure the supporting bar on the wall brackets (2) by inserting two fastening bolts (F) onto the
corresponding holes on the wall brackets.
2
F
2
F
1
1
Note: It is recommended to remove the crank wand from the crank loop and to store it in a safe place when
not in use.
Caution!
Stop retracting the awning if the fabric is under tension. Excessive retraction can tear
the fabric.
11
Product No. 088-1305-2
Cleaning the awning frame
• Use a mild detergent and warm water to clean the frame. Do not use abrasive cleansers, chemicals, bleach, or
solvents.
• Rinse with clean water.
Cleaning the fabric
• It is sufficient to just brush off the dirt on the fabric in most cases.
• If necessary, wipe the dirt off the fabric using a damp cloth soaked with mild soap.
• Dry the fabric in the extended position as soon as possible.
Maintenance
• It is recommended to retract the awning when not in use for an extended period of time.
Caution!
• Always clean and dry your awning completely before retracting it after every use.
• Before assembling, adjusting or cleaning the right and left arms, strap both arms, or
extend the awning fully until the internal springs are completely free of tension.
Dimensions (L x W)
2.4 x 1.5 m
8 x 5'
Product weight
15.8 kg (net), 18.5 kg (gross)
34 lb 13 oz (net), 40 lb 12 oz (gross)
Warranty
• Dry thoroughly.
• To maintain the best look of awning frame, apply some quality car wax after cleaning.
Technical Data
This For Living™ product carries a one (1) year warranty against defects in workmanship and materials.
Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period,
when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear
or breakage due to misuse and/or abuse.
Warranty
Cleaning and Maintenance
10