LED
LED ENCLOSED AND GASKET VAPORTITE HI-BAY
HV LED
APPLICATION
LED an enclosed and gasket Hi-Bay enclosed light
is appropriate for damp and wet locations as well as
for protection against dust and other non-hazardous
contaminants. It is often used in food industry, cold
storage, warehouses, parking garages, commercial
kitchens, car washing, utility tunnels, laundries and
industrial facilities.
FEATURES:
•
Specifications: HV
Length: 52-1/8 (1323)
Width: 14-1/2 (368)
Depth: 5-3/4 (146)
5-3/4
•
•
•
All dimensions are inches
(millimeters).
14-1/2
•
COMPATIBLE DIMMERS:
Leviton : IP710-DLX
Lutron : DVTV-XX
Encelium EMS : EN-LCM-1R10V-GB2-BK
Encelium EMS : EN-LCM-1R10V-GB2-BK/DR
Encelium EMS : EN-ALC-1R10V-GB2-BK
Encelium EMS : EN-ALC-1R10V-GB2-BK-DR
SYLVANIA : ELMC-SL3W-TVWBX/UNV
Wattstopper : ADF-120277
Synergy lighting Controls : ISD BC
•
•
•
MOUNTING:
•
ORDERING INFORMATION
MODEL
HV
EXAMPLE: HV-4-66LED/50-UNV
LENGTH
4
LED
4’ Length
66LED
72LED
80LED
107LED
134LED
162LED
194LED
225LED
COLOR TEMP.
66W LED
72W LED 1
80W LED
107W LED
134W LED
162W LED
194W LED
225W LED
VOLTAGE
3000K
3500K
4000K
5000K (Std.)
/30
/35
/40
/50
UNV
120
277
347
480
120-277V
120V
277V
347V 3
480V 3
(Blank)
PL
FT
Clear impact resistant
acrylic with frosted ends
Clear Polycarbonate with
frosted ends
Frosted impact resistant
acrylic
DM1
SD50
MOUNTING
0-10V Dim
10~100% (std.)
0-10V Dim 1~100%
Bi-Level Step dim 50/100
* Contact factory for custom minimum
dimming level set up. (Custom set up is not
available with SD50)
SENSOR
(Blank)
MS
IMSL
IMS
1
No sensor
Occupancy Sensor (Wet location)
Low voltage Integrated occupancy sensor with
hold-off day light and time delay control
Line voltage Integrated occupancy sensor with
hold-off day light and time delay control
www.utopialightingus.com
LED:
•
•
•
•
•
•
•
DIMMIG
DM
Compatible with chain, cable, dual pendant
mount (by others)
Color Temperature: 3000/3500/4000/5000 (K).
LED Module: High efficency up to 173 LPW.
Service life: Greater than 60,000 hours(L70)
minimizing maintenance frequency.
Poke in wire connectors.
Color variation within 3 MacAdam steps.
LM80
ELECTRICAL:
* Contact factory for custom wattage
or lumen requirement.
DIFFUSER TYPE
Vaportite fixture that features fiber glass housing with white powder coated iron gear
tray, hinge at both side with tool less latch for
easy of accessibility and maintenance.
One piece impact resistant Acrylic, frosted
ends and side linear prism diffuser.
Stainless steel latches as standard.
Fixtures provided with black end plug, 7/8”
housing end holes (2) - Snaps and locks tight
to maintain tight seal of unused end holes.
86% minimum average reflective white power
coated high gloss white reflectors or specular
aluminum reflector.
Housing utilizes off the shelf 1/2” fittings.
Poured in place gasket helps seal the
enclosures form most hostile environments.
Optional Tamper resistance available.
VH
CM
RGD
ACxx
V-Hook
Ceiling Mount
Rigid mount
Highbay Aircraft Cable Y-Hook (Pair)
Specify Cable Length: 60ft,120ft
* Contact factory for
more sensor options.
OPTIONS
EM
AB
MR4
GLR
GMF
TR
TRDT
CS16/3
Emergency Ballast 2
AB Switch
MIRO4 Reflector (Gear Tray Reflector)
Fast Blow Fuse 3
Slow Blow Fuse 3
Tamper-Proof Latch
Tamper-Proof Driver Tool
# 16/3 STW Cord and Plug set
(Length and Plug NEMA type : consult with factory)
•
•
•
•
•
High power factor electronic driver, operate
from a 120~277 Vac input range, 50 / 60 Hz.
Dimming Control: 10~100%(std.), 1~100%,
Bi-level step dim.
Power Factor: +0.9
Efficiency: +85%
Ambient Operating Temperature:
-40°C (-40°F) ~ 55°C (131°F).
Constant Current, Class 2
LISTING:
•
•
•
•
•
•
UL/CUL listed and labeled.
Suitable for damp and wet locations.
Assembled in USA.
ARRA compliant.
IP 67 rated.
5 years limited warranty.
NOTES:
1. Economic version : 100 lumen / Watt
2. Emergency Ballast options, see page 79.
3. Must specify voltage, not available with 347V.
UTOPIA LIGHTING reserves the right to change specifications, drawings, dimensions without prior notice.