LVT
LED 2X4 High-Bay Vaportight
Product Information
Project Name
Type
Catalog Number
Date
SPECIFICATIONS
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hose down & wet location fixture is IP67 rated (Sensored units are IP65 rated).
Poured in place gasket & stainless latches seal the enclosure from most hostile environments.
Frosted diffuser for uniform light distribution without pixilation.
Very tough diffuser resists breakage and reduces replacement and maintenance costs.
UL Sanitation; suitable for food production areas.
LED light engine eliminates risk of glass breakage in food production areas.
Rounded fixture shape for easy cleaning and prevents dirt and water accumulation.
Instant re-start with no warm-up times or reduced light output in cold environments.
Economical mounting options can provide dramatic savings on the installation labor.
Mounting options for v-hook, cable & ceiling mount systems.
High efficacy LED in multiple choices of lumen packages and colors.
Long-life LEDs at L80 (80% lumen maint.) at 60,000 hours reduce life cycle maintenance costs.
Up to 119 lumens per watt.
Color Rendering Index (CRI) > 80.
Made In USA. Meets ARRA & Buy American requirements.
Construction
• Fiberglass housing & injection molded impact resistant acrylic lens.
• Housing and lens are made with flame retardant 5VA (f1) fire rated materials.
• Certain airborne contaminants can diminish integrity of acrylic. Consult factory for chemical
compatibility.
• Secure locking plastic latches (Polyoxymethylene) standard. Chemical resistant stainless steel
latches optional, tamper resistance ready.
• Stainless steel mounting brackets standard, tamper resistance ready.
• Tamper proof stainless steel screws optional.
• Stainless steel v-hangers standard.
• Weight: 20 lbs.
Electrical
•
•
•
•
•
•
•
•
•
•
Input Voltage Range: 100-277 VAC Nom. (90-305 V Min/Max)
Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max)
Active Power Factor Correction
Power Factor: >0.90 @ full load, 100V through 277V
Inrush Current: 70 Amps max @ 220 VAC, cold start 25ºC
Harmonic Distortion: THD < 20% @ full load
Protection: Over-Voltage, Over-Temperature (110º) & Short Circuit with self-recovery
Compliant to FCC Part 15 requirements for EMI/RFI emissions
NEC/CEC compliant ballast disconnect is standard
Optional emergency battery pack
Certifications
•
•
•
•
•
•
CSA listed & tested to UL 1598 & UL 8750 standards. Wet location standard.
Luminaires bear appropriate listing labels.
Adheres to LM79, LM80 and TM21 industry standards.
LVT Fixtures are NSF Rated for Splash Zones
DesignLights Consortium® (DLC) qualified.
Please refer to the DLC website for specific product qualifications
at www.designlights.org.
• Please refer to the Lighting Facts website for specific product qualifications
at www.lightingfacts.com.
Application
• Suitable for use with most wired or wireless lighting control systems
• Suitable for wet locations such as:
• Livestock containment buildings
• Under awnings
• Food processing facilities
• Cold storage
• Commercial kitchens
• Car washes
• Industrial facilities
• Breweries
Warranty
• Five-year warranty. (Terms and Conditions Apply)
CERTIFICATION
ORDERING INFORMATION
–
MODEL
LVT LVT 2X4 LED
High-Bay
Vaportight
SIZE
2x4 2x4
–
–
LUMEN
OUTPUT
XL
LW
ML
HL
EXAMPLE LVT-2X4-HL-F-UL-40K-FA
DRIVER
OUTPUT
Extra Low
Low
Medium
High
Nominal
–
F Fixed
DM 0-10v
Dimming1
BL Bi-Level2
DRIVER
VOLTAGE
UL Universal
120-277
VAC
FOOTNOTES
1.
2.
3.
4.
BLANK Universal
120-277
Must be used in conjunction with lighting controls.
Bi-Level driver must be controlled by sensor or A/B switching.
Contact factory for additional cord & mounting options.
EB option is not available on HL output.
–
–
COLOR
TEMP
30K
35K
40K
50K
3000
3500
4000
5000
–
LENS
FA Frosted
Acrylic (std)
CA Clear Acrylic
CP Clear
Polycarbonate
BLANK Frosted
Acrylic
–
OCC
SENSOR
WH Wet
Location
High-Bay
Sensor
WL Wet
Location
Low-Bay
Sensor
–
CORD
PLUG3
C6 6' Cord,
No Plug
C6/ 6' Cord
L715 & Plug
(L7-15P)
C6/515 6' Cord &
Plug (515P)
OTHER
SSL Stainless
Steel Latches
TP Tamper
Proof SS
Screws
LSP Lighting
Surge
Protector
VSM Surface
Mounting
Bracket Set
EB Emergency
Battery
Backup 4
JP Job Pack
Page 1/3 - Revised: 08/31/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves
the right to change specifications without notice. Telephone [Midwest] 715.381.2971 / Website www.P-2.com
LVT
LED 2X4 High-Bay Vaportight
PHOTOMETRIC DATA
LUMINAIRE DATA
Luminaire
ZONAL LUMEN SUMMARY
LVT-2x4-LW-F-UL-40K
LED 2x4 High-Bay
Vaportight
15" X 52" LED WITH
WHITE BACK AND
CLEAR ACRYLIC LENS
(2) D23CC90UNVT-F
1.00
LED
15890
151.80
Surface
0º = 90 90º = 90
0º = 1.28 90º = 1.34
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing
Criterion
Luminous
Length: 4.17
Opening in Feet Width: 1.08
Height: 0.25
INDOOR CANDELA PLOT
Zone
Lumens
Lamp
Fixt.
0-30
0-40
0-60
0-90
0-180
4223
6973
12202
15606
15890
26.6
43.9
76.8
98.2
100.0
26.6
43.9
76.8
98.2
100.0
180
150
Test 14.00251 Test Date 9/5/14
135
5400
120
2700
105
ENERGY DATA
Total Luminaire Efficiency
100.0%
Luminaire Efficacy Rating (LER)
IESNA RP-1-2004 Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
105
Non-Compliant
$2.29 based on 3000 hrs.
and $0.08 per KWH
90
75
2700
60
5400
15
30
45
Horiz 0-180
45.0
90.0
0
0.0
LUMINAIRE DATA
Luminaire
165
ZONAL LUMEN SUMMARY
LVT-2x4-ML-F-UL-40K
LED 2x4 High-Bay
Vaportight
15" X 52" LED WITH
WHITE BACK AND
FROSTED ACRYLIC
LENS
D23CC90UNVT-F
1.00
LED
21291
226.30
Surface
0º = 90 90º = 90
0º = 1.26 90º = 1.23
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing
Criterion
Luminous
Length: 4.21
Opening in Feet Width: 1.13
Height: 0.25
INDOOR CANDELA PLOT
Zone
Lumens
Lamp
Fixt.
0-30
0-40
0-60
0-90
0-180
5693
9236
15929
20491
21291
26.7
43.4
74.8
96.2
100.0
26.7
43.4
74.8
96.2
100.0
180
165
Test 14.00020 Test Date 7/29/14
135
150
7400
120
3700
105
ENERGY DATA
Total Luminaire Efficiency
100.0%
Luminaire Efficacy Rating (LER)
IESNA RP-1-2004 Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
94
Non-Compliant
$2.55 based on 3000 hrs.
and $0.08 per KWH
90
75
3700
60
7400
0
15
30
Horiz 0-180
0.0
45.0
45
90.0
OPERATING ENVIRONMENT
Proposed
System
Min
Temp
Max
Temp
LVT-2X4-XL
0°C/32°F
40°C/104°F
LVT-2X4-LW
-30°C/-22°F
40°C/104°F
LVT-2X4-ML
-30°C/-22°F
25°C/77°F
LVT-2X4-HL
-30°C/-22°F
25°C/77°F
Application Notes
1. Application temperatures are provided to ensure the longevity and performance of the driver and LEDs.
2. Results are based off the In-Situ Temperature Measurement Test (ISTMT)
along with the drivers' temperature and life curves.
3. Optional emergency battery equipped units have a minimum temperature of 10°C.
4. Precision-Paragon [P2]'s 5 year warranty assumes operation
at the maximum ambient temperature range.
LUMEN PACKAGE OPTIONS
Proposed
System
Lumen
Output
CRI
Lumens
Per Fixture
Nominal
Input Watts
Lumens
Per Watt
LVT-2X4-XL
LVT-2X4-LW
LVT-2X4-ML
LVT-2X4-HL
XL
LW
ML
HL
>80
>80
>80
>80
11,600–12,600
15,100–16,400
20,600–22,300
30,000–32,600
110
150
225
275
115
109
99
119
*Lumen values shown are initial delivered lumens tested at 25°C per IES LM-79 standards.
Page 2/3 - Revised: 08/31/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves
the right to change specifications without notice. Telephone [Midwest] 715.381.2971 / Website www.P-2.com
LVT
LED 2X4 High-Bay Vaportight
FIXTURE DIMENSIONS
52.0
6.0
14.6
14.6
52.3
52.0
6.0
*Drawings N.T.S.
MOUNTING OPTIONS
SUSPENDED
STD. SUSPENDED MT. V-HANGER
STD. MOUNTING STRAP
Included
Included
V-Hook
GRIPPLE LOOP
Order Separately
Cable
Captive
Screws
Mounting
Beam Clip
SUSPENDED
STD. MOUNTING STRAP
Included
GRIPPLE Y-HOOK SNAP
Order Separately
V-Hook
Cable
Captive
Screws
Mounting
Beam Clip
SURFACE
STD. MOUNTING STRAP
Included
FLEXIBLE BRACKET (VSM)
Optional
V-Hook
Cable
Captive
Screws
Mounting
Beam Clip
*Contact the Service Hub for additional mounting options including stainless steel availability.
TAMPER RESISTANT LATCHES
STAINLESS STEEL LATCHES: TAMPER RESISTANT SCREWS (OPTIONAL)
TAMPER PROOF SCREWS
PART #95011778
NOTES:
*Torx screwdriver required for tamper proof screws.
*12 Screws Required
*Images N.T.S.
SCREW - #6 LENGTH - .62"
OPENED
CLOSED
Page 3/3 - Revised: 08/31/16 | Created: 2016
© 2016 Precision-Paragon [P2], a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Precision-Paragon [P2] reserves
the right to change specifications without notice. Telephone [Midwest] 715.381.2971 / Website www.P-2.com