LIGHT LINE SYSTEM
IL2 PLUS
Components and accessories
IL2 PLUS –
THE HIGHLY FLEXIBLE
LIGHT LINE SYSTEM
THERMAL MANAGEMENT
Permanent temperature monitoring
of LED and electronic driver, temperature
range from -25 °C – +50 °C
VARIATIONS
Different light colors
(4,000 K / 5,000 K / 6,500 K)
and performance levels available
(3,300 lm / 4,000 lm / 4,700 lm)
4 different track lengths
available (0.60 m to 4.20 m),
a plug-in connector every 0.6 m
PLUG & PLAY
Tool-less replacement of
electronic driver and LED module
is possible during operation
.20 m
o4
0.6 t
FLEXIBILITY
CABLE ROUTES
The top of the track can be
used for cable routing
Different optics can be used in every
track. Individual protection classes can
be upgraded retrospectively at any time.
LIGHT MANAGEMENT
Targeted luminaire design, efficient
lighting control optionally upgradable
EMERGENCY LIGHTING
SENSOR SYSTEM
LED module and electronic driver can be
used as emergency lighting, special
solution for addressable lighting
Intelligent sensor system can
be extended at every position
on the tracks
ALUMINUM
High-quality and durable
aluminum tracks
LED DRIVER
DALI and 1-10 V
LED MODULE
L80B10 after 60,000 h
with four (4) different
light distributions
MADE IN GERMANY
Development and production in Germany
IL2 PLUS
DATA AND FACTS
Optimal light right into the most far-flung corners of production
plants, facilities and for example, also high-bay warehouses: our
light line system IL2 PLUS shines with a consistent light quality.
Thanks to the option of freely selecting optics according to your
requirements, it is possible to guarantee homogeneous
illumination and ideally suited light distribution at all times.
The upper part of the support rail can be utilized as a cable route
and the phase organization per light point can be freely selected.
The benefits of the light line system | IL2 Plus:
➔➔ Highly flexible LED light line system
➔➔ Modular design
➔➔ Simple and fast tool-free installation
➔➔ Warp-resistant aluminum rails
➔➔ Intelligent temperature management
➔➔ Separate replacement of electronic drivers and LED module
➔➔ The luminaire type of protection can be upgraded to
IP 54 at any time
➔➔ Emergency lighting is possible
➔➔ Sensors can be upgraded and expanded at every rail position
➔➔ At least 80% luminous flux after an average lifetime of
60,000 operating hours
➔➔ Replacement part availability of at least 20 years
➔➔ Development and production in Germany
The most important areas of application:
➔➔ Warehouses
➔➔ Logistics facilities
➔➔ Factory facilities
➔➔ Production facilities
ELECTRONICS
Luminaire type
LED module each with 104 LEDs
Driver
Optionally as 1 – 10 V dimming or DALI
Failure rate of the electronic
drivers
Max. 3 % after 50,000 hours
(MTBF 2 million hours)
Mains connection
220 – 240 V / 50 – 60 Hz
Sensor system
Optional daylight sensors (1 – 10 V)
and / or presence detector (1-10 V, DALI, DALI 2)
Protection class
System: PROTECTION CLASS I / electronic
drivers and modules: PROTECTION CLASS II
Power factor
≥ 0.95 c
Power consumption
22 W (3,300 lm) / 28 W (4,000 lm) /
33 W (4,700 lm)
Surge voltage withstand capability
4 KV
LIGHT TECHNOLOGY
Effective system luminous flux
3,300 lm / 4,000 lm / 4,700 lm
Color temperature
4,000 K (840) / 5,000 K (850) / 6,500 K (865)
Color rendering index (CRI)
> 80
Luminous flux over lifetime
L80B10 after 60,000 operating hours
(in accordance with IES LM 80 and TM 21-11)
Optics
N optics: Narrow beam
W optics: Wide beam
D optics: Double asymmetrical illumination
X optics: Very narrow radiation
ADDITIONAL DATA
Dimensions (L x W x H)
LED module: 592 x 72 mm
Support rail: 0.6 m / 1.20 m / 3.00 m / 4.20 m
Length 600 / 1,200 / 3,000 / 4,200 x 90 x 85 mm
Weight pro 0.6 m
2.2 kg with complete module equipment,
1.3 kg without module equipment
Materials
High-quality and buckling-resistant support
rail made of aluminum, lens made of PMMA,
covering of PP
Mounting
Mounting by means of hanging on support rails
Colors
Support rail optionally in aluminum color, gloss
white similar to RAL 9016, grey similar to
RAL 9007 or black matt similar to RAL 9017
Ambient temperature range
3,300 lm: -25 °C to +50 °C
4,000 lm: -25 °C to +50 °C
4,700 lm: -25 °C to +45 °C
IP Certification (Luminaire)
IP 20 / IP 40 / IP 54
Certification
Efficiency class
Technical data effective from 06/2016
VARIANTS
IL2 PLUS light line system
Continuous suspension
IL2 PLUS light line system
Suspension, with coverage
IL2 PLUS light line system
Surface mounted
IL2 PLUS light line system
Suspension, individual module
LED MODULES AND OPTICS
Item number Light color Luminous flux
W
W optics
Production facilities
➔➔ Light point height: > 4 m
➔➔ Wide beam
➔➔ Very homogeneous illumination
➔➔ Large light line intervals also in
the case of low light point heights
4,000 K
3,300 lm
22 Watt
217.765-16X
4,000 K
4,000 lm
28 Watt
217.765-17X
4,000 K
4,700 lm
33 Watt
217.765-18X
5,000 K
3,300 lm
22 Watt
217.765-19X
5,000 K
4,000 lm
28 Watt
217.765-20X
5,000 K
4,700 lm
33 Watt
217.765-21X
6,500 K
3,300 lm
22 Watt
217.765-22X
6,500 K
4,000 lm
28 Watt
217.765-23X
6,500 K
4,700 lm
33 Watt
Item number Light color Luminous flux
N
N optics
High industrial facilities
➔➔ Light point height: > 7 m
➔➔ Narrow beam
➔➔ Narrow radiation characteristics
➔➔ Optimized for high light points
X
➔➔ Light point height: > 12 m
➔➔ Very narrow radiation
➔➔ Ideal for very high light points
4,000 K
3,300 lm
22 Watt
217.765-04X
4,000 K
4,000 lm
28 Watt
217.765-05X
4,000 K
4,700 lm
33 Watt
217.765-06X
5,000 K
3,300 lm
22 Watt
217.765-07X
5,000 K
4,000 lm
28 Watt
217.765-08X
5,000 K
4,700 lm
33 Watt
217.765-09X
6,500 K
3,300 lm
22 Watt
217.765-10X
6,500 K
4,000 lm
28 Watt
217.765-11X
6,500 K
4,700 lm
33 Watt
D optics
Supermarkets
➔➔ Light point height: > 2.6 m
➔➔ Double asymmetrical
➔➔ Targeted illumination
of shelving
W
N
X
Performance
217.765-39X
4,000 K
3,300 lm
22 Watt
217.765-40X
4,000 K
4,000 lm
28 Watt
217.765-41X
4,000 K
4,700 lm
33 Watt
217.765-42X
5,000 K
3,300 lm
22 Watt
217.765-43X
5,000 K
4,000 lm
28 Watt
217.765-44X
5,000 K
4,700 lm
33 Watt
217.765-45X
6,500 K
3,300 lm
22 Watt
217.765-46X
6,500 K
4,000 lm
28 Watt
217.765-47X
6,500 K
4,700 lm
33 Watt
Item number Light color Luminous flux
D
Performance
217.765-03X
Item number Light color Luminous flux
X optics
High-bay warehouse
Performance
217.765-15X
Performance
217.765-27X
4,000 K
3,300 lm
22 Watt
217.765-28X
4,000 K
4,000 lm
28 Watt
217.765-29X
4,000 K
4,700 lm
33 Watt
217.765-30X
5,000 K
3,300 lm
22 Watt
217.765-31X
5,000 K
4,000 lm
28 Watt
217.765-32X
5,000 K
4,700 lm
33 Watt
217.765-33X
6,500 K
3,300 lm
22 Watt
217.765-34X
6,500 K
4,000 lm
28 Watt
217.765-35X
6,500 K
4,700 lm
33 Watt
D
LED DRIVER
Item number
Connected load
Version
192.968-217
220-240 V, 50-60 Hz
1-10 V
192.968-227
220-240 V, 50-60 Hz
DALI
SUPPORT RAIL
Item number
Length
Protection class
Rail color*
192.966-001
4.2 m
Number of cores & cross section
7 x 2.5 mm²
IP 20
Alu
Cover color*
Black
192.966-051
4.2 m
14 x 2.5 mm²
IP 20
Alu
Black
192.966-002
3.0 m
7 x 2.5 mm²
IP 20
Alu
Black
192.966-052
3.0 m
14 x 2.5 mm²
IP 20
Alu
Black
192.966-003
1.2 m
7 x 2.5 mm²
IP 20
Alu
Black
192.966-053
1.2 m
14 x 2.5 mm²
IP 20
Alu
Black
192.966-005
0.6 m
7 x 2.5 mm²
IP 20
Alu
Black
192.966-055
0.6 m
14 x 2.5 mm²
IP 20
Alu
Black
Special 0.6 m support rails for integrating emergency / safety lighting available
* other color combinations on request
ACCESSORIES
BRACKETS
Item number
Description
Version
191.225-008
Metal bracket stainless steel *
Rope / chain suspension
191.225-028
Ceiling mounted
Direct fixation
194.665-008
Wire suspension
Rope / chain suspension
* other color combinations on request
END CAPS
Item number
Description
Version*
193.844-008
End cap with strain relief M25
Alu
193.844-018
End cap closed
Alu
193.844-088
End cap with rubber grommet M20
Alu
193.844-128
End cap strain relief 2x M20
Alu
* other color combinations on request
WIRE CABLES
COVERS
Item number
Description
200.406-008
Wire cable 2 m with loop (also available in 5 m)
200.406-028
Wire cable 2 m with eyelet (also available in 5 m)
200.406-048
Wire cable 2 m with hook for profiled steel panels (also available in 5 m)
Item number
Description
Version
Special feature
196.322-008
Cover below 0.6 m
gray
for IP 40 / IP54
196.322-018
Cover below 1.2 m
gray
for IP 40 / IP54
206.336-008
Sealing Kit for support rail
black
for IP 54
SENSOR SYSTEM
1-10 V COMPONENTS
DALI COMPONENTS
ACCESSORIES
Item number
Description
Application
Special feature
201.733-007
Steinel presence detector incl. constant
lighting control
up to 8 m height
in adapter box
201.733-037
Steinel presence detector incl. constant
lighting control
up to 10 m height
in adapter box
201.733-157
Esylux presence detector
specially for corridors
in adapter box
201.733-027
Osram daylight sensor
up to 8 m height
in adapter box
Item number
Description
Application
Special feature
201.733-017
Steinel presence detector incl. constant
lighting control (broadcast mode)
up to 8 m height
in adapter box
201.733-047
Steinel presence detector incl. constant
lighting control (broadcast mode)
up to 10 m height
in adapter box
201.733-147
Steinel presence detector incl. constant
lighting control (master mode)
up to 10 m height
in adapter box
Item number
Description
Application
Special feature
201.733-087
Adapter box without sensor
for sensor integration
Adapter box empty
214.119-007
Remote control Esylux
Controls for Esylux sensor
Remote control
201.731-007
Remote control Steinel RC3
Control unit for Steinel
sensors
Remote control
DALI CONTROL COMPONENTS
CONTROL PANELS
CONTROL UNITS
SIGNAL CONVERTER
POWER SUPPLIES
ACCESSORIES
Item number
Description
Application
Special feature
214.120-007
Glass touch panel 6 keys
freely programmable
black
214.120-017
Glass touch panel 12 keys
freely programmable
black
Item number
Description
Application
Special feature
214.122-007
Control unit NCR 1 channel USB
Top-hat rail mounting
1x 64 DALI addresses
214.122-017
Control unit NCR 2 channel USB
Top-hat rail mounting
2x 64 Dali addresses
214.122-027
Control unit NCR 1 channel LAN
Top-hat rail mounting
1x 64 DALI addresses
214.122-037
Control unit NCR 2 channel LAN
Top-hat rail mounting
2x 64 Dali addresses
Item number
Description
Application
Special feature
214.121-007
Signal converter 8 channel
Top-hat rail mounting
Switch contact signal
on Dali
214.121-017
Signal converter 4 channel
Flush-mounted
Switch contact signal
on Dali
Item number
Description
Application
Special feature
214.123-007
Power supply
for no more than 1 NCR control
Top-hat rail mounting
for no more than 1
NCR control unit
214.123-017
Power supply
for up to 3 NCR controls
Top-hat rail mounting
for up to 3 NCR
controls
Item number
Description
Application
Special feature
214.124-007
Network switch
Connection for
4 NCRs and 1 PC
5-port 10/100 Mbit/s
EMERGENCY / SAFETY LIGHTING
SAFETY LIGHTING IN LED TECHNOLOGY
E. g. CEAG emergency and safety lighting systems can be integrated directly into the support rail through a range of intelligent solutions. We also offer
solutions to integrate lighting products from other manufacturers. The combination of HELLA LED module and Hella ECG is certified according to DIN EN 60598-2-22.
HELLA KGaA Hueck & Co.
HELLA INDUSTRIES
Rixbecker Strasse 75
59552 Lippstadt / Germany
Tel. + 49 2941 38 - 32818
Fax + 49 2941 38 - 47 32818
industries@hella.com
www.hella-industries.com
Subject to technical change.
As of 02/2016
© HELLA KGaA Hueck & Co., Lippstadt/Germany
Printed in Germany
HELLA INDUSTRIES
Street lighting
Industrial lighting
Interior lighting
You can find more information at:
www.hella-industries.com