25W Single Output AC Dimmable LED Power Supply
PCD-25
series
Features :
AC phase-cut dimming
Work with leading edge and trailing edge TRIAC dimmers
115VAC or 230VAC models available
Built-in active PFC function
Constant current design
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully isolated plastic case
IP30 design
Class
power unit, no FG
Class 2 power unit
Suitable for indoor LED lighting applications
100% full load burn-in test
Low cost
High reliability
3 years warranty
F
110
( for B type only)
PCD-25-350 A
SELV
( for B type only)
IP30
( for A type only)
( for PCD-25-350/700 )
( except PCD-25-350/700 )
( for B type only)
A : With AC input 90~ 135VAC.
B : With AC input 180~ 295VAC.
SPECIFICATION
MODEL
RATED CURRENT
PCD-25-350
PCD-25-700
PCD-25-1050
PCD-25-1400
350mA
700mA
1050mA
1400mA
24 ~ 36V
16 ~ 24V
12 ~ 18V
0 ~ 700mA
0 ~ 1050mA
0 ~ 1400mA
OPERATING VOLTAGE RANGE 40 ~ 58V
CURRENT RANGE
OUTPUT
INPUT
PROTECTION
CURRENT ACCURACY
0 ~ 350mA
5.0%
25.2W
25.2W
25.2W
RIPPLE & NOISE (max.) Note.1 4.6Vp-p
2.7Vp-p
2.2Vp-p
2Vp-p
NO LOAD OUTPUT VOLTAGE (max.) 63V
50V
35V
25V
RATED POWER
20.3W
SETUP TIME
1000ms / 230VAC 2000ms / 115VAC at full load
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.9/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
EFFICIENCY (Typ.)
82%
AC CURRENT (Typ.)
INRUSH CURRENT(max.)
0.6A/115VAC
40A/230VAC
LEAKAGE CURRENT
<0.5mA / 240VAC
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed.
95
10 (RTH1)
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
81%
0.3A/230VAC
80.5%
80%
0.2A/277VAC
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +60
(Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80
0.03%/
, 10 ~ 95% RH
(0 ~ 50
)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
UL8750, CSA C22.2 No. 250.0-08(except for PCD-16-350, PCD-25-350, PCD-25-700), ENEC EN613471, EN61347-2-13,
EN62384(for B type only), IP30 approved ; design refer to UL60950-1, TUV EN60950-1, EN61347-1, EN61347-2-13
SAFETY & WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
EMC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015 (B type only), EN61000-3-2 Class C ; EN61000-3-3, FCC part 18 non-consumer equipment (A type only)
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
906.5Khrs min. MIL-HDBK-217F (25
84*57*29.5mm (L*W*H)
0.19Kg; 72pcs/14.7Kg/0.92CUFT
)
1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
File Name:PCD-25-SPEC 2012-04-17
PCD-25
25W Single Output AC Dimmable LED Power Supply
Mechanical Specification
Case No.PCD16A
series
Unit:mm
A Type:(PCD-25-_A)
3
84
15.3
14.5
150 10
UL1430 18AWG
V+(RED)
V-(BLACK)
34.5
7.3
57
T case
7.3
75 5
UL1430 18AWG
15.3
AC/N(WHITE)
3.6
2 - - 8 .9
2
AC/L(BLACK)
3
1.9
29.5
T case: Max. Case Temperature.
B Type:(PCD-25-_B)
3
84
15.3
14.5
150 10
UL1430 18AWG
V+(RED)
V-(BLACK)
34.5
75 5
7.3
NISPT-1 18AWG
3.6
2 - - 8 .9
2
15.3
AC/N(BLUE)
57
T case
7.3
AC/L(BROWN)
3
1.9
29.5
T case: Max. Case Temperature.
Block Diagram
fosc : 90KHz(115VAC)
120KHz(230VAC)
I/P
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
O.L.P.
RECTIFIERS
&
FILTER
+V
-V
DETECTION
CIRCUIT
PWM & PFC
CONTROL
O.C.P.
File Name:PCD-25-SPEC 2012-04-17
PCD-25
25W Single Output AC Dimmable LED Power Supply
Derating Curve
series
Static Characteristics
100
100
90
80
80
70
LOAD (%)
LOAD (%)
60
40
20
-30
60
50
40
-25
-5
0
15
30
40
50
60
(HORIZONTAL)
90
180
135 Type A (60Hz)
295 Type B (50Hz)
INPUT VOLTAGE (V)
AMBIENT TEMPERATURE ( )
Power Factor Characteristic
PF
Constant Current Mode
1.00
0.98
0.96
0.94
0.92
0.90
0.88
0.86
0.84
0.82
0.80
0.78
277V ac(B Type)
230V ac(B Type)
115V ac(A Type)
50%
60%
70%
80%
90%
100%
(25W)
LOAD
EFFICIENCY vs LOAD (PCD-25-350)
EFFICIENCY (%)
PCD-25 series possess superior working efficiency that up to 86%
can be reached in field applications.
88
84
80
76
72
68
64
60
56
52
48
44
40
36
277Vac(B Type)
230Vac(B Type)
115Vac(A Type)
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
File Name:PCD-25-SPEC 2012-04-17
25W Single Output AC Dimmable LED Power Supply
PCD-25
series
AC Dimming Operation
The following diagram depicts a typical installation utilizing the PCD-25 :
Io
0A
TRIAC
Based
Dimmer
MW
PCD-25
Under direct driving, the power supply will work in "constant current mode (CC)" and output voltage of the power supply will be clamped by sum of
forward voltage (V F ) of the LED strip.
Dimmer Compatibility Chart
Dimmer Model
Manufacturer
LUTRON
SKYLARK SF-12P-277
(277VAC / 60Hz)
LUTRON
DVF-103P-277
(277VAC / 60Hz)
LUTRON
SKYLARK SF-10P
(120VAC / 60Hz)
LUTRON
SKYLARK S-600P
(120VAC / 60Hz)
LUTRON
SKYLARK DVF-103P
(120VAC / 60Hz)
LEVITON
ILLUMATECH TM Cat.No.IP106
(120VAC / 60Hz)
LEVITON
SURESLIDE TM Cat.No.6633-P
(120VAC / 60Hz)
LEVITON
SURESLIDE TM Cat. NO.6615-P
(120VAC / 60Hz)
JUNG
Licht-Management 225 TDE
(230VAC / 50Hz)
JUNG
Licht-Management 225 NV DE
(230VAC / 50Hz)
Tronic-Drehdimmer 286710
(230-240VAC / 50Hz)
T39.01
(230VAC / 50Hz)
CLIPSAL
32E450UDM
(220-240VAC / 50Hz)
CLIPSAL
NO 32E450TM
(220-240VAC / 50Hz)
BERKER
Bodo Ehmann LICHTREGLER
Conduction angle: 30 degrees(min.) / 180 degrees(max.)
File Name:PCD-25-SPEC 2012-04-17