MP26N DRIVER
S P E C I F I C A T I O N
Description:
Line voltage triac dimming 18w 350mA LED driver. MODA's
revolutionary EZ-LIGHT plug on secondary output makes
installation fast and simple. 120v input, compact size for
easy concealment. Quality construction by MODA engineers
ensure long life. Protected from short circuit, over voltage, over
current and over temperature. Durable plastic construction.
Fully potted. Cooling by free air convection. Dry location rated.
Tested by UL.
Dimensions:
Output:
120v AC
Output
2 1/10”
(54mm)
1 3/10”
(32.5mm)
3 3/10” (85mm)
3 3/10" x 2 1/10" x 1 3/10"
(85mm x 54mm x 32.5mm)
Packing
(LxWxH)/Carton
3 1/2" x 3" x 1 2/5"
(90mm x 77mm x 35mm)
Weight (lbs)
0.4lbs (181.4g)
Safety & EMC:
Safety
Standards
30 ~ 48v DC
Rated Current
350mA
Rated Power
18w Max
Efficiency(Typ.)
79%
Voltage Tolerance
±6
Ripple & Noise (max.)
4vp - p
3 3/10” (85mm)
Dimensions
(LxWxH)
(For lux multiply fc by 10.7)
DC Voltage
UL, cUL 1310 Class 2 CE Approved
Electrical:
Input:
Voltage Range
110v AC
Frequency Range
60Hz
AC Current (Max.)
0.24A at 115v AC
Power Factor
>0.9
Inrush Current (Max.)
<20A
Leakage Current
<1mA / 120v AC
Protections:
MBTF
Dimming Notes
>100,000 Hours at full load and 25°C
ambient conditions (MIL-217F)
Triac Based incandescent dimmers
(Standard phase - leading edge).
Over Current
95 ~ 105% rated current.
Type: Auto-recovery after fault condition disappeared.
Short Circuit
Type: Hiccup mode & recovers after fault condition
disappeared.
Over Voltage
Over Temperature
Class
14 ~ 20v
Type: Latch mode ( re-power on to recover )
Tcase: 95°C ± 10°C
Type: Shutdown mode ( re-power on to recover )
Class 2
Environment:
Submittal Information:
Project Name:
Date:
Company:
P/O #
Name:
Type:
Location
Dry location rated IP20
Operation Temp.
-20°C ~ +50°C full load
Operation Humidity
20% ~ 95% RH non-condensing
Storage Temp.
-20 ~ +80°C
Storage Humidity
10% ~ 95% RH
Vibration
5 to 50Hz
Note: With constant development of LED technology please refer to our website
for current technical data.
Notes:
© Cop yrig ht 2 01 5 • 955 W hit e Dr iv e, Las Vega s , N V 8 9 11 9 • T: 7 0 2 4 0 7 7 7 7 5 • F : 7 0 2 4 0 7 7 7 7 3 • w w w.m o d a l i g h t.co m
S P E C I F I C A T I O N
Mechanical Specification:
2 1/2" (63mm)
2 3/5" (54mm)
3 3/10" (85mm)
1 3/10" (32.5mm)
3 3/10" (85mm)
Wiring Diagram
Dimmer Recommended Chart
1.25A
0A
+
Triac Based
Dimmer
MP26N LED Driver
Manufacturer
Dimmer Model
LUTRON
SKYLARK SELV-300P
LUTRON
DIVA DVLV-600P
LUTRON
DIVA DV600P
LEVITON
SURESLIDE 6631
LEVITON
TRIMATRON 6681
AC input
-
LED Lighting Source
Notes:
1. All specifications not specially mentioned are measured at 230v AC and 25°C ambient temperature.
2. Ripple & Noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with
0.1uf & 47uf parallel capacitor.
3. Voltage Tolerance: includes line regulation, load regulation and set-up tolerance.
4. Constant Current operation region is within 75%~100% rated output voltage. This is the suitable
operation region for LED related applications, but please reconfirm special electrical requirements for
some specific system design.
Ordering:
SKU:MP26N
RoHS
LOVE
THE
EARTH
5
year
warranty
MODA Products are protected under Worldwide Patents. Minimum order quantity may apply. Due to continuous improvements and innovations, specifications may change without notice.
Please refer to our website for current technical data. These figures are provided as a guideline only and may vary with differing power supplies and installations. All rights reserved. E. & O.E.
© C opyrig ht 2 01 5 • 9 55 W hit e Dr iv e, Las Vegas , NV 8 9 11 9 • T: 7 0 2 4 0 7 7 7 7 5 • F : 7 0 2 4 0 7 7 7 7 3 • w w w. m o d a l i g h t.co m