PUCK LED 3W, 12V AC/DC
REV05.12.16
Remove Collar
for Recessed Mounting
Surface Mount - Satin Aluminum
Surface Mount -White
Surface Mount (Collar Included)
Recessed
Description:
Recessed or surface-mount, Puck LED features solid aluminum construction
and uses only 3 watts of warm-white LED light. Ideal for under cabinet
illumination. The tiny but very powerful round fixture is available with a 90
degree beam spread. Includes 8 foot cord/plug port, wire clips and screws.
Fixture plugs into 4- or 8-port hub, which distributes the low voltage power
from LED power source. Fixtures use 12VAC or 12VDC power supplies and
include a 5 year warranty.
Finish:
Satin Aluminum, White or Bronze
Lamp Specification:
4 Total Watts, 138 total lumens, 12V AC or DC LED, 3070K, 84CRI,
70% lumen maintenance based on 50,000 hours of operation
Surface Mount - Bronze
.50"
(1.27cm)
Dimming Information:
Dimmable with Lutron Diva or Skylark standard electronic low voltage
dimmers. AC power supplies dim down to 20% before flickering and slight
buzzing
Power Supply:
Hardwired: TE-60L-12
Plug-In: TE-60L-12AC-P
2.42"
(6.15cm)
Weight:
.5 lb (0.23 kg)
Recessed
Type
PUCK
.50"
(1.27cm)
–
RD
RDRound
2.7"
(6.85cm)
Surface
Beam Angle
90°
Ø2.70"
(6.85cm)
D" FC DIA.
12" 74.5 13"
18" 32.5 20"
24" 18.4 26.5"
36" 8.1
38"
FC
DIA
fixture
type:
Watts
–
3W
3W 3 Watts
Beam Spread
–
90D
90D 90 degree
Color Temp (K)
–
30K
30K 3070 Kelvin
Finish
–
SA
SA
Satin Aluminum
WHWhite
BZ
Bronze
POWER HUB FOR PUCKS & DOTS
REV05.12.16
8 Port Hub shown
Description:
The 4 or 8 Port Hub distributes the 12V AC/DC low voltage power
from LED transformer to a combination of 1 to 4 or 1 to 8 LED
Puck or Dot lights. Includes 6 foot Power Feed Connector Cord
and 3 clips.
6 foot cord connects
to LED power source
1.65"
(4.2cm)
Product
1.3"
(3.3cm)
.6"
(1.5cm)
HUB-4P
HUB
Type
–
HUB Power Hub
4P
4P
8P
4 Port
8 Port
2.35"
(6cm)
.6"
(1.5cm)
1.3"
(3.3cm)
HUB-8P
12 Ft. Hub Extension Cord and Hub Connector
The 12 ft extension cord extends the Hub power cord or the Puck
and Dot fixture cord. Includes 6 pieces of WC-1 wire clips. Use
HUB-HUB-12 to link multiple Hubs together.
Product
HUB
Type
–
HUB Power Hub
EC
EC Extension Cord
HUB Hub to Hub
Length
–
12
12 12 Feet
Wire Clips
Wire Clips keep wires organized. Secure with screws or doublesided tape (included). 3 wire clips provided for each fixture. Also
sold separately.
Product
WC
WC Wire Clip
Type
–
1
1 Standard
AC POWER FOR PUCKS
REV05.12.16
Electronic 60 Watt AC Transformer with Rectangle Canopy Cover
TE-60L-12 Electronic 60 Watt 12 Volt AC hard wire fits inside single gang electrical
box covered with a white 3" rectangular canopy, powering the Dots and Pucks.
Product
Wattage
TE
–
TE Transformer Electronic
60L
Voltage
–
60L 60 Watt LED
12AC
Type
–
12AC 12 Volt AC
3RE
3RE 3 Inch Rectangle
Canopy Cover
Finish
–
WH
WHWhite
Electronic 60 Watt LED AC Transformer Plug-In
Plug-In version of the TE-60-12 Electronic 60 Watt 12 Volt AC Transformer
includes 10 ft of cord and DC Connector to plug into the HUB-4P or HUB-8P
powering the Dots and Pucks.
Product
Wattage
–
TE
TE
Transformer Electronic
60L
Voltage
–
60L 60 Watt LED
12AC
12AC 12 Volt AC
Type
–
P
P Plug In
Electronic 60 Watt LED AC Transformer
TE-60L-12 Electronic 60 Watt 12 Volt AC Transformer converts standard 120 volt
line voltage to 12 volts and features built-in short-circuit protection. Fits inside
an electrical junction box. Minimum dimming load is 6 watts.
Product
Wattage
–
TE
TE
Transformer Electronic
60L
60L 60 Watt LED
and Halogen
Voltage
–
12
12
12 Volt AC
3" Rectangle and 4" Round Canopy Cover
The white rectangle or round canopy cover conceals the TE-60L-12 LED
transformer (sold separately) inside a single gang box to power Dots and Pucks.
Finish
Product
3RE
–
3RE 3 Inch Rectangle
Canopy Cover
4RD 4 Inch Round
Canopy Cover
WH
WHWhite
PUCK LED
AC DIMMING, HARDWIRED
REV05.12.16
Application:
Electronic low-voltage dimming for 4 Puck LED fixtures
Power Supply: 60 watt, 120 volt input, 12 volt AC output TE-60L-12
Dimming: Dimmable with Lutron Diva #DVELV-300P or Skylark #SELV-300P standard electronic low voltage dimmers. AC power supplies dim down to 20% before flickering and slight buzzing
HUB-HUB-12 (12 FEET)
RECTANGLE
ELECTRICAL BOX
TE-60L-12AC-3RE-WH
HUB-4P OR
HUB-8P
E
YELLOW (HOT)
WHITE(NEUTRAL)
120VAC
TE-60L-12
12VDC/AC
120VAC
RECTANGLE
CANOPY COVER
(3RE-WH)
6FT
HUB-4P OR
HUB-8P
SWITCH OR ELECTRONIC
LOW VOLTAGE DIMMER
PUCK LED CABINET
LIGHTING. 3W PER FIXTURE
EDGE # PUCK-RD-3W-90D-30K-SA
3FT
PUCK LED
AC DIMMING, PLUG-IN
REV05.12.16
Application:
Electronic low-voltage dimming for 7 Puck LED fixtures
Power Supply:
60 watt, 120 volt input, 12 volt AC output TE-60L-12AC-P
Dimming: Dimmable with Lutron Diva #DVELV-300P or Skylark #SELV-300P standard electronic low voltage dimmers. AC power supplies dim down to 20% before flickering and slight buzzing
See power supply spec sheet for additional details.
OPTIONAL HUB FOR
ADDITIONAL FIXTURES
SWITCH OR ELV DIMMER
HUB-4P
BLACK (HOT)
WHITE(NEUTRAL)
120VAC
HUB-HUB-12 (12 FEET)
6FT
12VAC
OUTLET
HUB-4P OR HUB-8P
10FT
POWER SUPPLY
TE-60L-12AC-P
60W 12VAC
3FT
PUCK LED CABINET LIGHTING. 3W PER FIXTURE
EDGE # PUCK-RD-3W-90D-30K-SA