4418 WET NICHE
OR ADJUSTABLE
NICHE MOUNT
CATALOG
NUMBER
NOTES
TYPE
Line Voltage
Fountain Fixture
DESCRIPTION
Specifications
L:
12”
305 mm
11”
279 mm
11”
279 mm
W:
H:
These heavy cast bronze underwater fixtures are ideal for
use in fountains, waterfalls, or reflection pools. Designed
for medium base PAR-38 incandescent or tungsten
halogen (quartz) lamps, 83W Max. - 120V. Furnished
with one piece U-shaped silicone gasket and tempered
heat-resistant convex lens.
EXAMPLE: 4418 P3883I 120 CLC NM 34B RG CSL35
ORDERING INFORMATION
Model
Lamp Type
4418
P3883I
PAR38 Med.
Voltage
Distribution1
Lens
120
FL
Flood
CLC 2
Convex Lens Clear
SP
Spot
CLA
Convex Lens Amber
CLB
Convex Lens Blue
CLG
Convex Lens Green
CLR
Convex Lens Red
Mounting
Conduit Entries
Accessories
Cord Set Length
Lamp
ANM
Adjustable Niche Mount
34B
RG3
CSL__
LPI
NM
Niche Mount
3/4” NPT on Bottom
Rock Guard
35’-120’ of cord available
in 5’ increments
Lamp Installed
FEATURES & SPECIFICATIONS
FIXTURE HOUSING & DOOR: Heavy wall cast bronze construction. Natural bronze finish.
NICHE: Stainless steel with cast bronze mounting ring, which has provisions for positive locking of fixture into
position, four ears for tying to forms or steel structural rods. Pressure grounding lug on interior and exterior surfaces.
Conduit entrance is 3/4” NPT with 3/4” x 1/2” NPT reducer bushing supplied. The adjustable niche mount fixture is
capable of 360° rotation with 30° of vertical tilt.
Notes:
1 Distribution only required if LPI is chosen.
2 CLC is the standard lens and will be used if nothing is chosen.
3 Required on ANM.
LAMP: 120V, PAR-38, see ordering guide.
SOCKET: Porcelain medium screw base with nickel plated copper shell and 200°C insulated leads.
LENS: 6 1/2” diameter convex clear tempered heat resistant glass. Amber, blue, green or red lenses also available.
GASKET: Single-piece molded U-shaped silicone.
CORD: Minimum of 35’ of #16-3 ST submersible rated cord. Cord entrance is brass, water-tight seal and epoxy
encapsulated. Cord length must be specified.
NOTE: Sufficient cord should be coiled in the fixture niche to allow for the removal of fixture to above water level for
re-lamping.
FACTORY LEAK TESTED: Fixtures are tested at 10 PSI (0.70kg/cm2) internal pressure while totally submerged in
water.
LOW WATER CUT OFF: Temperature sensing low water cut-off standard.
FASTENERS: Stainless steel.
ACCESSORIES: Rock Guard: Cast bronze exterior grid, optional on niche mount wall mounting, required on
adjustable niche mount and niche mount floor mounting.
LISTING: U.L.
WARRANTY: 1-year limited warranty. Complete warranty terms located
at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
NOTE: Hydrel Reserves The Right To Modify Specification Without Notice. Any dimension
on this sheet is to be assumed as a reference dimension: “Used for information purposes
only. It does not govern manufacturing or inspection requirements.” (ANSI Y14.5-1973)
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014-2015 Acuity Brands Lighting, Inc.
Rev. 05/05/15
4418_NM_ANM