Series
Series
Vacuum pumps & Blowers
4307 & 4310 Blower Packages
Installation Ready
Featuring...
High Vacuum Tri-Lobe Blowers
607
-
4310 Pro Pak
Gearbox Drive
4310 Tri-Lobe Blower
Part #131-4310-LDM
Product Features:
•
•
•
•
•
•
Continuous duty performance at maximum vacuum
Range of airflow to accommodate the toughest jobs
Quiet operation due to innovative internal ballast silencing
Ballast port manifold - cools blower through air injection
Integral 4-Way pressure/vacuum change over valve
Integral final filter with easy access cleaning
•
•
•
•
•
4” hose barbed adjustable porting for intake and exhaust
Tri-lobe design with precision machining
Oil-less operation
Factory installed flushing system
Designed, built, and supported in the USA
Factory Designed and Built for the Perfect Fit
Reliable – Efficient – Cost Effective
National Vacuum Equipment
MADE IN
THE USA
Locations in Michigan & Texas
800-253-5500 | 800-998-6834 FAX | sales@natvac.com
natvac.com
PTION
4307 Challenger Series Packages
Each 4307 Pro Pak is designed around our industry leading Challenger Series high vacuum tri-lobe blower and is built in
our state of the art fabrication facility with the following standard features:
Available in Multiple Drive Systems:
• 560 CFM tri-lobe high vacuum blower with complete manifold
• Sound dampening internal air ballast
• Fully insulated stainless steel enclosure
• Powder coat painted 3/8” steel mounting bracket
• All elbows, fittings and high temperature hoses are factory installed
• Factory installed flush kit
• Gearbox Drive
4 Drive
• Hydraulic
• Top Mount Belt Drive
• Top Mount Hydraulic Drive
4
D
3
2
9 1/4"
13 7/8"
D
3
13 7/8"
REV
A
9 1/4"
17 1/2"
4" HOSE BARB
8 3/4"
3
2
C
4307 Pro Pak
Gearbox Drive
REV
A
17 1/2"
4" HOSE BARB
DATE
1/21/2016
8 3/4"
1
REVISION HISTORY
DESCRIPTION
RELEASED TO PRODUCTION
5 5/16"
APPROVED ZONE
ECN2217
21 3/16"
D
C
5 5/16"
35 3/8"
1
21 3/16"
45 7/16"
35 3/8"
32 3/4"
B
17 1/2"
29 3/4"
26 7/8"
High Airflow in a Compact Package
3
10
8 3/4"
9
11
29 3/4"
B 5/16"
5
26 7/8"
C
2
45 7/16"
32 3/4"
PARTS
ITEM QTY
PART NUMBER
1
1
280-4310-002
2
1
280-355-055
1
3
280-355-088
29
3/4"
4
1
490-800-025
A
5
1
120-100-023
4
6
FW - 1_2
7
4
HHCS - 1_2-13 UNC - 1.75
4
8
LW - 1_2
9
10 LW - 1_4 SS
10
9
ANSI B18.2.1 - 1/4-20 UNC - 1
11
10 FW - 1_4 USS
4
LIST
DESCRIPTION
4310 PROPAK 2-REV BASE UNIT
4310 GEARBOX KIT (500 SPIRAL)
GEARBOX COVER PLATES 4310
4310 FOAM KIT GB DRIVE
DECAL MAX OPERATING TEMP
FLAT WASHER - 1/2"
HEX HEAD CAP SCREW - 1/2-13 UNC - 1.75
LOCK WASHER, 1/2
LOCK WASHER, 1/4"
Hex Cap Screw
FLAT WASHER - 1/4" USS
ITEM
1
2
3
4
A
5
6
7
8
9
10
11
QTY
1
1
1
1
1
4
4
4
10
9
10
PARTS
PART NUMBER
280-4310-002
280-355-055
280-355-088
4
490-800-025
120-100-023
FW - 1_2
HHCS - 1_2-13 UNC - 1.75
LW - 1_2
LW - 1_4 SS
ANSI B18.2.1 - 1/4-20 UNC - 1
FW - 1_4 USS
4
7
7 1/16"
8
DESCRIPTION
4310 PROPAK 2-REV BASE UNIT
6
4310 GEARBOX KIT (500 SPIRAL)
CAD FILE LOCATION
GEARBOX COVER PLATES 4310
TOLERANCES UNLESS OT
4310 FOAM KIT GB DRIVE
One place (.X)
DECAL MAX OPERATING TEMP
Two places (.XX)
FLAT
3 WASHER - 1/2"
Three places (.XXX)
HEX HEAD CAP SCREW - 1/2-13 UNC - 1.75
Angles
10 WASHER, 1/2
LOCK
Fractional (X/X)
LOCK
9 WASHER, 1/4"
All machined surfaces 1
Remove all burrs and sh
Hex Cap Screw
CAD drawing - NO manu
11 WASHER - 1/4" USS
FLAT
B
All dimensions in inches
3
LIST
This document may conta
secret information whi
property of National Vacu
information on this dra
disclosed to anyone no
Know." The information c
be used only in accord
interests of National Va
7 1/16"
3
4307 Tri-Lobe Blower
CAD FILE LOCATION: I:\Engineering\CAD - Production\147-4310-400.idw
Part #131-4307-LDM
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X)
Two places (.XX)
Three places (.XXX)
Angles
±.1
±.01
±.005
±1°
NVE
2
SHEET SIZE
APPROX. WT.
C
972 lbs
National
Vacuum
Equipment, Inc.
2707 Aero Park Drive, Traverse City, MI 49686
4310 Challenger Series Packages
Each 4310 Pro Pak is designed around our industry leading Challenger Series high vacuum tri-lobe blower and is built in
our state of the art fabrication facility with the following standard features:
Available in Multiple Drive Systems:
• 940 CFM tri-lobe blower with complete manifold
• Sound dampening internal air ballast
• Fully insulated stainless steel enclosure
• Powder coat painted 3/8” steel mounting bracket
• All elbows, fittings and high temperature hoses are factory installed
• Factory installed flush kit
4
• Gearbox Drive
• Hydraulic Drive
• Top Mount
Belt Drive
4
• Top Mount Hydraulic Drive
3
3
2
13 7/8"
REV
DATE
1/21/2016
A
SAE C FACE MOUNT
13 7/8"
R
D
SAE C FACE MOUNT
D
1
3
2
1
REVISION HISTORY
4"
HOSE
BARB
REV
DATE
DESCRIPTION
1/21/2016
A
RELEASED TO PRODUCTION
8 3/4"
17 1/2"
4" HOSE BARB
8 3/4"
D
5 5/16"
C
5 5/16"
1
4310 Pro Pak
Hydraulic Drive
21 3/16"
C
21 3/16"
17 1/2"
35 3/8"
35"
8 3/4"
35 3/8"
32 3/4"
MADE IN
THE USA
5 5/16"
C
9
26 7/8"
PARTS
ITEM QTY 29 3/4" PART NUMBER
1
1 280-4310-002
2
1 148-4310-018
1 280-355-082
3
4
1 490-800-027
A
5
1 120-100-023
4 FW - 1_2
6
7
4 HHCS - 1_2-13 UNC - 1.75
4 LW - 1_2
8
9
9 ANSI B18.2.1 - 1/4-20 UNC - 1
10
9 LW - 1_4 SS
11
9 FW - 1_4 USS
4
29 3/4"
10
11
29 3/4"
26 7/8"
4
2
B
B
ON
APPROVED ZONE 17 1/2"
ECN2217
35"
32 3/4"
7 1/16"
4
3
PARTS LIST
9
LIST
CAD FILE LOCATION: I:\Engineering\CAD - P
2
ITEM QTY
PART NUMBER
DESCRIPTION
TOLERANCES UNLESS OTHER WISE SPECIFIED
7 BASE
1
1 280-4310-002
4310 PROPAK 2-REV
UNIT (.X)
10
One place
±.1
places (.XX)
±.01
2
1 148-4310-018
HYDRAULIC KIT 4310Two
C-FACE
B
8
11
Three 43
places
(.XXX)
±.005
1 280-355-082
3
HYDRAULIC COVER PLATES
SERIES
Angles
±1°
6 DRIVE
4
1 490-800-027
4310 FOAM KIT HYD
A
Fractional (X/X)
±1/16
5
1 120-100-023
DECAL MAX OPERATING TEMP
All machined surfaces 125 RMS max.
4 FW - 1_2
6
FLAT WASHER - 1/2" Remove all burrs and sharp edges.
CAD
drawing
- NO- manual
7
4 HHCS - 1_2-13 UNC - 1.75
HEX HEAD CAP SCREW
- 1/2-13
UNC
1.75 changes.
All dimensions in inches unless specified.
4 LW - 1_2
8
LOCK WASHER, 1/2
This document may contain confidential trade
9
9 ANSI B18.2.1 - 1/4-20 UNC - 1
Hex Cap Screw
secret information which is the exclusive
10
9 LW - 1_4 SS
LOCK WASHER, 1/4"property
of National Vacuum Equipment. Any
11
9 FW - 1_4 USS
FLAT WASHER
- 1/4"
USS
information
on this drawing is not to be
SHEET
SIZE
C
disclosed
to anyone not having a 3"Need to
4
CAD FILE LOCATION: I:\Engineering\CAD
- Production\147-4310-435.idw APPROX. WT.
922 lbs
The power and performance you
have been looking for all in one
compact package!
DESCRIPTION
4310 PROPAK 2-REV BASE UNIT
HYDRAULIC KIT 4310 C-FACE
HYDRAULIC COVER PLATES 43 SERIES
4310 FOAM KIT HYD DRIVE
DECAL MAX OPERATING TEMP
FLAT WASHER - 1/2"
7 1/16"
HEX HEAD CAP SCREW - 1/2-13 UNC - 1.75
LOCK WASHER, 1/2
Hex Cap Screw
LOCK WASHER, 1/4"
TOLERANCES UNLESS OTHER WISE SPECIFIED
FLAT WASHER - 1/4" USS
One place (.X)
±.1
3 Two places (.XX)
±.01
Three places (.XXX)
±.005
Angles
±1°
NVE
Know." The information contained herein is to
be used only in accordance with the best
interests of National Vacuum Equipment.
National
Vacuum
2
Equipment, Inc.
2707 Aero Park Drive, Traverse City, MI 49686
4307 & 4310 Challenger Series Top Mount Packages
Features:
4" MNPT
8
16"
D
4'-1 5/16"
• High shaft or low shaft configuration available
• Sound dampening internal air ballast
• Fully insulated stainless steel enclosure
• Factory installed Moisture Trap
• Factory installed Cyclone Grit RIdder
• Factory installed Exhaust7 Silencer
• Factory installed Final Filter
• Factory installed Remote 4-Way
• Factory installed Gauges
• Easily Serviceable
6
3'- 3/8"
DIM. VARIES
SEE NOTES
C
5'-7 1/16"
8"
2'- 3/4"
2'-10"
6'-7 7/8"
Series
1'-9 1/16"
CAD FILE LOCATION: I:\Engineering\Projects\1218 4310 PACKAGE OVERHAU
Data\43 SERIES CHANGES\TOP MOUNT PACKAGES\TM PACKAGE REV
4310 Blower
2'-8 1/4"
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X)
Two places (.XX)
Three places (.XXX)
Angles
Fractional (X/X)
Available in Multiple Drive Systems:
FOR
W SHAFT)
All machined surfaces 125 RMS max.
Remove all burrs and sharp edges.
CAD drawing - NO manual changes.
All dimensions in inches unless specified.
DIMENSION FOR
CCW BLOWER (HIGH SHAFT)
• Top Mount Belt Drive
• Top Mount Hydraulic Drive
14.6"
18.55"
19.34"
6
5
Series
4
DISTRIBUTED BY:
A
©2016 National Vacuum Equipment, Inc. | Revised 06/2016
3
2
NVE
2707 Aero Park
Phone: (231) 9
PART NAME:
D
MATERIAL:
DRAWN BY: ME
SCALE:
SHEET
1 of 1
For over 30 years NVE has been providing quality vacuum
system components to the liquid waste markets. From design,
to development to product support, NVE IS the industry leader.
Vacuum pumps & Blowers
607
This document may contain confidential trade
secret information which is the exclusive
property of National Vacuum Equipment. Any
information on this drawing is not to be
disclosed to anyone not having a "Need to
Know." The information contained herein is to
be used only in accordance with the best
interests of National Vacuum Equipment.
B
Series
-
±.1
±.01
±.005
±1°
±1/16
In addition to our team of engineers and highly qualified support
staff, NVE has a state of the art machine shop, fabrication shop,
NOTES:
and powder coat paint facility housed in two plants
in Traverse
HIGH SHAFT (CCW BLOWER)
City, Michigan. We also have a warehouse and1.)
support
2.)sales
LOW SHAFT
(CW BLOWER)
facility in Mansfield, Texas.
DIMENSION FOR
BELT SIZE
For questions and additional information please contact
8MPC200036your
8MPC220036
dealer or NVE direct at 800.253.5500.
8MPC224036
CW BLOWER (LOW SHAFT)
18.93"
22.88"
23.67"
Thank you,
8
7
6
Series
2
1
REVISION HISTORY
DESCRIPTION
ADDED MOUNTING DIMENSIONS SHT 2
REV DATE
APPROVE
A 5/6/11
BOB
10/1/1 UPDATED MODEL, MOVED TO CAD PROD
B
ECN 171
2
ADDED FLANGE, REMOVED FEET, ADDED
2" COUPLER TO TOP, REMOVED LUBE
ADT
C 8/8/13
NUTS FROM TOP
9/19/2
UPDATED HOLE SIZE ON TOP DISHED
D
ADT
013
HEAD
4/16/2
E
CHANGED 428-20125-1C TO 428-0202-1C ECN 197
014
PartCLEAN
#222-900-1
REVISED
OUT COUPLER ANGLE,
8/6/20 INCREASE PIPE LENGTH (222-900-1-10),
ECN 204
F
• Cyclonic action
grit and debris from airflow
14 removes
REVISED GUSSETS (222-900-1-11 & -12)
• 4” NPT inlet
with a 4” ANSI flange outlet
10/20/ REPLACED THREADED PIPE W/ 4" ANSI
ECN 219
• FlangedGcenter
2015for optimum adjustability
FLANGE
Series
Vacuum pumps & Blowers
4307 & 4310 Components and Accessories
Grit Ridder 900 -
Grit Ridder 600 - Part #222-600-2
2
• Cyclonic action removes grit and debris from airflow
• 4” NPT inlet and outlet
• Flanged center for optimum adjustability
1
• Approximate dimensions - 18.5”x13”x45”
• Approximate weight 154 lbs
• 4307 only
• Approximate dimensions - 21”x15”x51”
• Approximate weight 240 lbs
• 4310 only
607
-
D
4 11/16"
8 1/2"
C
21 13/16"
222-600-2
B
National Vacuum Equipment
MADE IN
THE USA
Locations in Michigan & Texas
800-253-5500 | 800-998-6834 FAX | sales@natvac.com
natvac.com
CAD FILE LOCATION: I:\Engineering\CAD - Production\222-600-2.idw
CAD FILE LOCATION: I:\Engineering\CAD - Production\222-900-1.idw
SHEET SIZE
C
APPROX. WT. TOLERANCES UNLESS OTHER WISE SPECIFIED
C
SHEET SIZE
APPROX. WT. 190
National
4307 & 4310 Challenger Series Components & Accessories
Factory designed, tested, and built specifically for our tri-lobe blowers. Takes the guess work out of designing your own
mounting system. Several accessory options are available to choose from.
Round Silencer - Part #224-4310-03
• Stainless steel internals and carbon steel shell
• Installs anywhere, in any position
• 4” ANSI flanged fittings
• Approximate dimensions - 48.5”x14.25”
• Approximate weight 194 lbs
• Designed to work with the 4307 & 4310
Ultra Silencer - Part #224-360-002
• Custom fit for extremely quiet operation
• Stainless steel construction
• Universal design with multiple porting options
• Top and bottom flanged for many mounting options
• Approximate dimensions - 27”x12.25”x25.75”
• Approximate weight 243 lbs
4
3
• Designed to work with the 4307 & 4310
2
D
REV
DATE
G
4/3/2014
H
I
5/14/14
5/27/2014
J
5/27/2015
K
2/5/2016
1
REVISION HISTORY
DESCRIPTION
CHANGE BODY WELDMENT WELD FROM
1/4" TO 3/16"
ADDED LEVER 362-301-2
REVISED SIZE OF STRAP INSIDE LID
STAND WAS 19-7/8" WIDE X 17-7/8"
HIGH, LID WAS CARBON STEEL, HOLE
SIZE FOR PRV COUPLER WAS 2-5/8",
REMOVED PRV FROM PACKAGE
RESIZED 218-140-001-10 DUE TO
INTERFERENCE
APPROVED ZONE
ECN 1969
-
ECN 1997
ECN 2007
-
ECN 2139
-
D
ECN 2227
Horizontal Moisture Trap - Part #218-140-001
17"
C
B
2'-5 11/16"
• Mounts to truck frame
• Stainless steel construction
• 4” TTMA flanged fittings
• 2” drain valve
• Lube Nuts included
• Approximate dimensions - 30”x17”x25”
2'-1 1/4"
• Approximate weight 97 lbs
• Designed to work with the 4307 & 4310
C
Aluminum Moisture Trap - Part #218-001-003
• 2.5” vacuum/pressure gauge
• 2” pressure relief
• 2” level valve
• Includes upper & lower mounting brackets
• Approximate dimensions - 26.5”x10.25”x21.75”
• Approximate weight 83 lbs
• Designed specifically for the 4307
B
26 1/2"
5 1/8"
CAD FILE LOCATION: I:\Engineering\CAD - Production\218-140-001.idw
TOLERANCES UNLESS OTHER WISE SPECIFIED
2 3/4"
One place (.X)
Two places (.XX)
Three places (.XXX)
Angles
Fractional (X/X)
13"
A
A
A
±.1
±.01
±.005
±1°
±1/16
All machined surfaces 125 RMS max.
Remove all burrs and sharp edges.
CAD drawing - NO manual changes.
All dimensions in inches unless specified.
This document may contain confidential trade
secret information which is the exclusive
property of National Vacuum Equipment. Any
information on this drawing is not to be
disclosed to anyone not having a "Need to
Know." The information contained herein is to
be used only in accordance with the best
interests of National Vacuum Equipment.
4
3
©2016 National Vacuum Equipment, Inc. | Revised 06/2016
1"
2
NVE
SHEET SIZE
APPROX. WT.
C
140 LBS
National
Vacuum
Equipment, Inc.
2707 Aero Park Drive, Traverse City, MI 49686
Phone: (231) 941-0215 Fax: (231) 941-2354
PART NAME:
MT 14" HORIZONTAL
MATERIAL: SEE
BOM
DRAWN BY: ADT
CHECKED BY:
SCALE:
DATE:
SHEET
1:4
1 of 14
218-001-003
PART NO.
218-140-001
1
A