MDZWIB00, MDZPIB00/01
ZDII SERIES INDOOR DOME MOUNTS
MDZWIB00
MDZPIB00
MDZPIB01
The MDZWIB00 wall mount and MDZPIB00/01 pendant mounts are indoor medium duty mounting arrangements that
are designed specifically for use with our new ZDII Series, 8-inch full sphere, indoor pendant style dome. All mounts
are constructed of schedule-40 steel pipe with integral mounting flange that is extremely rugged when properly
fastened to a support structure. The MDZWIB00 is specifically designed for indoor wall mounting and the MDZPIB00/01
are designed for indoor pendant installations.
These mounts are designed to aesthetically complement any indoor installation where wall or pendant mounting is
required. Both the MDZWIB00 and MDZPIB00 mounts are constructed of 1-inch diameter steel tubing that offers
superior strength when properly fastened to a wall or ceiling structure. The MDZPIB01 is constructed of 1-1/4 inch
diameter steel tubing with threaded NPT pipe. These mounts include a base-mounting flange with four .312-inch
mounting holes that can easily be mounted to a supporting structure. All mounts are carbide black powder coat paint.
On both the MDZWIB00 wall mount and MDZPIB00/01 pendant mounts, all cabling is easily passed through the internal
tubing making the installation clean and free of exposed cabling. Each mount is easily fastened to the ZDII Series dome
via a steel mating flange and three M4/8 Screws.
• Specifically designed for ZDII Series
Pendant Domes.
• MDZWIB00 mount is for indoor wall mounting
installations.
• MDZPIB00/01 mounts are for indoor pendant mounting
installations.
• Rugged Medium Duty Design.
• Constructed of 1" diameter schedule-40 steel pipe with
integral steel wall or pendant mounting flange.
• Each mount is powder coated carbide black paint that
compliments the aesthetics of the ZDII Series
Pendant Dome.
• All cabling can be easily passed through the mount
pipe into the dome thus hiding all interconnecting
cable.
• Each mount includes a medium duty steel, mounting
flange for fastening to a support structure.
• Simple to secure to the dome top via a 2.875" diameter
flange and three M4/8 screws (supplied w/dome).
18/5
MDZWIB00, MDZPIB00/01
TECHNICAL SPECIFICATIONS
MDZWIB00 WALL MOUNT:
Construction:
Dome flange and wall flange – 14 gauge cold
rolled steel (CRS)
Pipe:
1" diameter x .065 wall thickness x 6.25" long cold
steel (CS)
Dome Mating:
3/16" thick x 2.875" diameter flange, three M4/8
screws provided with dome
Wall Mount:
Four .312 diameter holes for 3mm fasteners
Finish:
Carbide black powder coat paint
Environment:
Indoor
Weight:
2.8 lbs. (1.27kg)
Max Load:
25 lbs. (11.31kg)
MDZWIB00
MDZPIB00 PENDANT MOUNT:
Construction:
Dome flange and wall flange – 14 gauge cold
rolled steel (CRS)
Pipe:
1" diameter x .065 wall thickness x 6.93" long cold
steel (CS)
Dome Mating:
3/16" thick x 2.875" diameter flange, three M4/8
screws provided with dome
Wall Mount:
Four .312 diameter holes for 3mm fasteners
Finish:
Carbide black powder coat paint
Environment:
Indoor
Weight:
3 lbs. (1.36kg)
Max Load:
25 lbs. (11.31kg)
MDZPIB00
MDZPIB01
MDZPIB01 PENDANT MOUNT:
Construction:
Dome flange and wall flange – 14 gauge cold
rolled steel (CRS) with 1 1/4" FPT welded coupling
Pipe:
1 1/4" diameter x .156 wall thickness x 6.0" long cold
steel (CS) NPT pipe.
Dome Mating:
3/16" thick x 2.875" diameter flange, three M4/8
screws provided with dome
Wall Mount:
Four .312 diameter holes for 3mm fasteners
Finish:
Carbide black powder coat paint
Environment:
Indoor
Weight:
2.4 lbs. (1.09kg)
Max Load:
25 lbs. (11.34kg)
Design and specifications subject to change without notice.
Conversion: 1" = 25.4mm
Measurement conversions are approximate
Ultrak Worldwide Support Center:
1305 Waters Ridge Drive
Lewisville, TX 75057
(800) 796-2288 (972) 353-6500
Fax (972) 353-6670
REV 08/14/02
www.ultrak.com
©Ultrak® is a registered trademark of Ultrak, Inc. 2002.
18/6