BAE Secura Solar
G
Solar
Wind
Hydropower
Biomass
Batteries for Renewable
Energy Applications
n
Made i
y
erman
BAE Secura Solar Batteries for Renewab
Applications
Type
PVS Cells
PVS Block
PVV Cells
Technology
Vented (VLA)
Vented (VLA)
Valve regulated (VRLA)
Maintenance
Low maintenance
Low maintenance
Maintenance free
Nominal capacity (100 h)
140 – 4,940 Ah
70 – 420 Ah
140 – 4,940 Ah
2V
12 V, 6 V
2V
Tubular
Low antimony
Tubular
Low antimony
Tubular
Lead calcium
SAN (HB)
SAN (HB)
ABS (HB/V-O)
Liquid
Liquid
GEL
Up to 3 years
Up to 3 years
Maintenance free
1 – 240 h
1 – 240 h
1 – 240 h
100 % tight
100 % tight
100 % tight
> 1,500
> 1,200
> 1,500
2.30 – 2.40
2.30 – 2.40
2.30 – 2.40
2.23
2.23
2.25
Nominal voltage
Positive electrode
Container (UL-94 rating)
Electrolyte
Water-refilling-interval 1)
Typical discharge time
Pole bushing
Cycles IEC 60896-11/-21
Charge voltage at cyclic operation
(V/cell)
Float voltage at non cyclic operation
(V/cell)
Reference temperature: 20 °C
1) Reference values. The real water-refilling-interval for vented batteries depends on many factors, e.g. ambient temperature and specific
battery operation.
ble Energy Applications
PVV Block
PVSM Cells
PVSM Modules
PVVM Cells
PVVM Modules
Valve regulated (VRLA)
Vented (VLA)
Vented (VLA)
Valve regulated (VRLA)
Valve regulated (VRLA)
Maintenance free
Low maintenance
Low maintenance
Maintenance free
Maintenance free
70 – 1,260 Ah
180 – 900 Ah
180 – 900 Ah
140 – 700 Ah
140 – 700 Ah
12 V, 6 V, 2 V
2V
24 V, 48 V
2V
24 V, 48 V
Tubular
Lead calcium
Tubular
Low antimony
Tubular
Low antimony
Tubular
Lead calcium
Tubular
Lead calcium
SAN/ABS (HB/V-O)
PP (HB)
PP (HB)
PP (HB)
PP (HB)
GEL
Liquid
Liquid
GEL
GEL
Maintenance free
Up to 3 years
Up to 3 years
Maintenance free
Maintenance free
1 – 240 h
1 – 240 h
1 – 240 h
1 – 240 h
1 – 240 h
100 % tight
100 % tight
100 % tight
100 % tight
100 % tight
> 1,500
> 1,000
> 1,000
1,000
1,000
2.30 – 2.40
2.30 – 2.40
2.30 – 2.40
2.30 - 2.40
2.30 – 2.40
2.25
2.23
2.23
2.25
2.25
BAE Secura Solar
Quality – Made in Germany
BAE solar batteries are used in renewable energy applications such as photovoltaic power generation. They
are used in hybrid applications as well as in stand-alone
photovoltaic systems, which include a very wide range of
sizes and application fields. So BAE solar batteries have
been proven in industrial energy systems even under
extreme conditions as well as in private households, e.g.
to increase the content of self consumed solar PV energy.
BAE solar batteries reflect outstanding quality by:
•long cycle life approved acc. to IEC 61427
•fully insulated battery design to ensure touch
protection
•very good recharge behaviour
•excellent deep discharge capability
•perfect reliability due to absolute tight pole bushing
•external intercell connector design for all solar block
batteries
•easy access for measurements of e.g. voltage via
service ring and/or pole screw
Installed maintenance free VRLA-GEL BAE PVV battery system
The company BAE is certified in accordance with
international quality and environmental standards.
Top quality and reliability are the core elements of
the success of our products. BAE solar batteries fulfill
national and international battery standards as given
below:
BAE Secura PVS Solar
BAE Secura PVSM Solar
IEC 60896-11
IEC 61427:2005
BAE Secura PVV Solar
BAE Secura PVVM Solar
IEC 60896-21
IEC 61427:2005
BAE Batterien GmbH
Wilhelminenhofstraße 69/70
12459 Berlin
GERMANY
Tel.: +49 (0) 30 53001- 661
Fax: +49 (0) 30 53001- 667
E-mail: info@bae-berlin.de
www.bae-berlin.de
ISO 9001:2008
Quality
Management by
ISO 14001:2009
Environmental
Management by
OHSAS 18001:2007
Health and Safety
Management by
08/2013 480 4900 Technical details may be subject to alterations. www.filusch-fiore.de
BAE offers low maintenance VLA batteries with liquid
electrolyte as well as maintenance free batteries in
VRLA-GEL technology. Due to the high cyclic requirements batteries with positive tubular plates are used
only. Moreover BAE is able to supply tailor-made
solutions.
Solar photovoltaic industrial system