DIRECTIONAL VALVES
Blue rectangles are links to other catalog pages.
CV06-B20 Check Valve
DESCRIPTION
A screw-in, cartridge-style, hydraulic check valve for blocking or load-holding.
2
OPERATION
The CV06-B20 allows flow from ➀ to ➁, while normally blocking flow in the opposite
direction. The cartridge is spring-biased closed until sufficient pressure is applied at
➀ to open to ➁.
FEATURES
• Hardened seat for long life and low leakage.
• Fully guided check assembly.
• Small size.
• Fast closing and seating.
RATINGS
Operating Pressure: 345 bar (5000 psi)
Proof Pressure: 690 bar (10,000 psi)
Burst Pressure: greater than 828 bar (12,000 psi)
Flow: up to 7.6 lpm (2 gpm)
Internal Leakage: 0.10 cc/minute (2 drops/minute) max. at 34.5 bar (500 psi)
and 345 bar (5000 psi) from port 1, port 2, inlet
Operating Temperature: -54°C to 107°C (-65°F to 225°F)
Filtration: Recommend 25µ nominal or better; See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions
Cavity: VC06-B2; See page 9.106.1
Cavity Tool: CT06-B2xx; See page 8.600.1
1
SYMBOL
2
1
PRESSURE DROP bar/psi
PERFORMANCE (Cartridge Only)
Port 1 to 2
32 cSt/150 sus oil at 40°C
3.45/50
2.76/40
2.07/30
1.38/20
0.69/10
1.9
0.5
3.8
1.0
5.7
1.5
7.6
2.0
FLOW lpm/gpm
4.006.1
®
HYDRAFORCE.com
HYDRAFORCE
®
CV06-B20
DIMENSIONS
HEX SOCKET
TORQUE –
7 to 8 ft-lbs
(9.5 to 10.8 Nm)
0.31
HEX
8.0
PORT
2
9/16–18 UNF-2A
THREAD
1.26
32.1
INCH
MILLIMETRE
PORT
1
MATERIALS
Cartridge: Weight: 0.023 kg. (0.05 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
TO ORDER
CV06-B20 - __ __ __ - __ __
Bias Spring
5 0.34 bar (5 psi)
Porting
0 Cartridge Only
®
HYDRAFORCE.com
4.006.2
Blue rectangles are links to other catalog pages.
PRESSURE CONTROLS
RVCV56-20 Relief Valve w/Reverse Flow Check
DESCRIPTION
A screw-in, cartridge-style, direct-acting, poppet-type hydraulic relief valve with a
built-in reverse-flow check intended for use as a pressure limiting and regulating
device in demanding, high-pressure hydraulic circuits which require fast response,
low hysteresis, low leakage, low pressure override, and reverse free-flow features.
OPERATION
The RVCV56-20 blocks flow from ➀ to ➁ until sufficient pressure is present at ➀
to displace the poppet off its seat. Relief flow discharges to port ➁. Reverse flow
occurs from ➁ to ➀ when differential pressure between ➁ and ➀ exceeds the
check spring value.
FEATURES
• Maximum pressure 420.6 bar (6100 psi) at port ➀.
• Adjustments cannot be backed out of the valve.
• Adjustments prohibit springs from going solid.
• Hardened spool and cage for long life.
• Fast, smooth response to pressure surges.
2
1
RATINGS
SYMBOL
PERFORMANCE
PRESSURE DIFFERENTIAL bar/psi
Relief Valve Mode
Max. Pressure Drop; Cartridge and Body
32 cSt/150 sus oil at 40°C
414
6000
Max. Setting
345
5000
276
4000
207
3000
Min. Setting
138
2000
69
1000
Press. Drop
at Max. Opening
18.9
5
37.8
10
56.7
15
75.6
20
Pressure Rating: 420.6 bar (6100 psi) at port ➀; 68.9 bar (1000 psi) at port ➁
Proof Pressure: 482.6 bar (7000 psi)
Burst Pressure: 965.3 bar (14,000 psi)
Flow Rating: Port ➀ to ➁: 113.6 lpm (30 gpm); Port ➁ to ➀: 174.1 lpm (46 gpm)
Overshoot: Less than 20% of setting
Adjustable Pressure Range, Port ➀ to ➁: 137.9 bar (2000 psi) minimum;
420.6 bar (6100 psi) maximum
Crack Pressure Defined: 0.95 lpm (0.25 gpm)
Maximum Reseat Pressure, Port ➀ to ➁: 85% of crack pressure
Leakage at Port ➁: 10 drops/minute (0.53 ml/minute) at 103.4 bar (1500 psi) max.
Maximum Crack Pressure, Port ➁ to ➀: 1.17 bar (17 psi)
Temperature: with Buna N seals: -40°C to 100°C (-40°F to 212°F);
with Fluorocarbon seals: -26°C to 204°C (-15°F to 400°F);
with Polyurethane seals: -54°C to 107°C (-65°F to 225°F)
Filtration: See page 9.010.1
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity, page 9.060.1
Installation: No restrictions; See page 9.020.1
Cavity: VC16-2; See page 9.116.1
Cavity Tool: CT16-2XX; See page 8.600.1
Seal Kit: SK16-2x-B; See page 8.650.1
94.5 113.4
30
25
PRESSURE DIFFERENTIAL bar/psi
FLOW lpm/gpm
Check Valve Mode
10.3
150
Max. Pressure Drop; Cartridge and Body
32 cSt/150 sus oil at 40°C
8.6
125
6.9
100
5.2
75
3.4
50
1.7
25
38
10
76
20
113
30
151
40
189
50
227
60
265
70
FLOW lpm/gpm
6.022.1
®
HYDRAFORCE.com
Blue rectangles are links to other catalog pages.
HYDRAFORCE
®
RVCV56-20
DIMENSIONS
1.00
25.4
2.00
50.8
1.33
33.7
1.50
DIA.
38.1
Optns. ‘C’, ‘L’
Optn. ‘B’
3.37
85.5
2.77
70.3
0.25
HEX
6.4
ACROSS
FLATS
3.25
82.6
Optn. ‘A’
0.75
ACROSS
19.1
FLATS
Optns. ‘F’, ‘H’
2.76
70.2
1.50
ACROSS
38.1
FLATS
2.10
53.3
TORQUE
150 ft-lbs
(203.4 Nm)
1.00
25.4
1.79
45.4
2
2
Ductile iron
body shown.
2.25
57.2
1
INCH
MILLIMETRE
3.50
88.9
0.34
DIA.
8.6
Thru
2 Places
1
MATERIALS
Cartridge: Weight: 0.62 kg. (1.36 lbs.)
Steel with hardened work surfaces.
Zinc-plated exposed surfaces.
O-rings and polyester elastomer
back-up standard.
Ported Body: Aluminum: 0.57 kg.
(1.25 lbs.); Anodized high-strength
6061 T6 Aluminum alloy, rated to
207 bar (3000 psi). Ductile iron body
required for operation over 207 bar
(3000 psi). See page 8.016.1
2.56
65.0
TO ORDER
RVCV56-20__ - __ - __ - __ __ / __ __ __ __
Adjustment Option
1/4 in. Hex Allen Head
1-1/2 in. Dia. Alum. Knob
Option A w/ Cover Cap
Factory Preset Non-Adj.
Factory Preset
Hidden Adj.
Option C w/
Lockwire Holes
Setting in bar
A
B
C
F
Specify, for example:
30.0 3000 psi
Pressure Range
30 137.9 to 206.8 bar
(2000 to 3000 psi)
45 213.7 to 310.3 bar
(3100 to 4500 psi)
60 317.2 to 420.6 bar
(4600 to 6100 psi)
L
*BSP Body; UK Mfr. Only
HYDRAFORCE.com
M210 210 bar
Setting in psi
H
Porting
Cartridge Only
SAE 12
SAE 16
3/4 in. BSP*
1 in. BSP*
®
Specify, for example:
0
12T
16T
6B
8B
N
V
P
Seals
Buna N
Fluorocarbon
Polyurethane
6.022.2