www.weidmueller.com
WAVECONTROL
WAVECONTROL is a sub-section of the WAVESERIES range,
focused on a.c. voltage and current monitoring. Apart from
including the WAVE construction features above
WAVECONTROL offers …
• Direct a.c. or d.c. current inputs up to 60 A, or a.c. voltages
up to 450 V.
• Inputs and d.c. outputs are selectable via DIP switches,
without further calibration
• Hall-effect sensor option, which allows the cable measured
to be fed through the WAVECONTROL housing, making the
use of a current transformer unnecessary for applications up
to 60 A.
• DIN rail mountable current transformers for measurements
up to 500 A
WAVEDATA
WAVEDATA is a useful isolator option for interface conversion,
with …
• A choice of RS 232 to RS 485/422 or RS 232 to TTY
interfacing
• 3-way isolation
• DIP switch configurability
WAVETOOL
WAVETOOL is a support software application for
WAVEANALOG PRO products. Downloadable to your PC or
laptop, WAVETOOL is there to help you …
• Verify that the input / output combination required can
be done
• Illustrate the DIP switch positions required
MANNSERIES
MANNSERIES is a complementary range of Weidmuller signal
conditioning products targeted at the process industries, and
featuring …
• DIN rail mounted modules with metal housings and front
adjustments
• Front-of-panel mounted digital displays and conditioners
• Microprocessor-based options with high levels of configurability using a simple menu system from the front of
the instrument.
• Multi-channel monitors with integral maths functions and
serial communications (RS 485 / Modbus)
• Software configuration applications
• Portable calibration and testing tools
MICROANALOG
MICROANALOG offers some BIG signal conditioning features
in a small package, such as …
• Extremely high density mounting on DIN rail (6.1 mm width
per module)
• High insulation (300 V) options, including power supply for
input
• HART compatibility option
• Transmitters and isolaters with DIP switch-selectable outputs
• Multipin connection option, for use as 8 channel analogue
I/O block for PLC / SMS.
Argentina
Australia
Austria
Azerbaijan
Bahrain
Belarus
Belgium
BosniaHerzegovina
Brazil
Bulgaria
Canada
Chile
China
Colombia
Costa Rica
Croatia
Czech Republic
Denmark
Egypt
Estonia
Finland
France
Germany
Greece
Hong Kong
Hungary
Iceland
India
Indonesia
Iran
Ireland
Israel
Italy
Japan
Jordan
Kazakhstan
Kuwait
Latvia
Lebanon
Lithuania
Luxembourg
Macedonia
Malaysia
Mexico
Netherlands
New Zealand
Norway
Oman
Paraguay
Peru
Philippines
Poland
Portugal
Qatar
Romania
Russia
Saudi Arabia
Serbia/
Montenegro
Singapore
Slovakia
Slovenia
South Africa
South Korea
Spain
Sweden
Switzerland
Syria
Taiwan
Thailand
Turkey
UAE
Ukraine
United Kingdom
Uruguay
USA
Venezuela
Vietnam
Yemen
Product Overview Analogue Signal Conditioning
High performance in arduous environments
Plant measurements such as temperature, pressure, level, flow,
weight, speed etc, must not be degraded on their way from
the field to the control room. Conversion or changes to these
signals requires electronics of the highest quality, which can
also withstand wide ambient temperature changes, electromagnet interference, a vibrating environment, corrosive or
hazardous atmospheres.
Weidmüller is the leading manufacturer of components
for electrical connection technology. The Weidmüller
product portfolio ranges from terminal blocks,
PCB connectors and terminals, protected components,
Industrial Ethernet components and relay sockets to
power supply and overvoltage protection modules
suitable for all applications. Electrical installation and
marking material, basic I/O components and a variety of
tools round off the range. As an OEM supplier, the
company sets global standards in the field of electrical
connection technology.
Broad functionality – and still broadening!
In a single document, this guide illustrates the scope of
Weidmuller’s analogue capability, and makes it easy to select
the right product for the job!
Analogue Signal Conditioning
We cannot guarantee that there are no mistakes in the
publications or software provided by us to the customer for the
purpose of making orders. We try our best to quickly correct
errors in our printed media. For this purpose we list corrections,
which have been identified after publishing printed media, on our
web site at www.weidmueller.com. For convenience we list these
corrections against product catalogue number and/or page
number. This Internet-database is part of our catalogue.
Product overview
Segment-targeted construction
Three tiers of construction and configurability are offered for
Weidmuller’s rail mounted electronics:
• Wider, heavy duty metal housings with adjustment through
a front membrane, (MANN Series) aimed at the Process
segment
WAVESERIES
WAVESERIES has established a fine reputation in the industrial
environment, with it’s …
• Isolators – for standardized (mA, V) signals, Transmitters –
to amplify delicate sensor outputs into standardized values,
and Process alarms (or Trip amplifiers) – to switch relays at
preset analogue input levels
• Unique choice of fixed range and configurable options
• Inputs accepted from most electrical sources, e.g. d.c. mV,
V, mA, thermocouples, RTDs, resistance, potentiometers,
strain gauges, frequency, a.c. voltage, a.c. current.
All orders are based on our general terms of delivery, which can
be reviewed on the websites of our group companies where you
place your order. On demand we can also send the general terms
of delivery to you.
• Modular, robust, high quality polymer housings with wide
adjustment via DIP-switch on the circuit board, (WAVE Series)
for general industrial use
• Very high density (6 mm width), but robust polymer housings
with limited adjustability via external DIP-switches
(MICROANALOGUE Series) for lighter industrial applications.
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Phone +49 (0) 5231 14-0
Fax
+49 (0) 5231 14-2083
E-Mail info@weidmueller.com
Internet www.weidmueller.com
Worldwide support
You can be sure with Weidmuller that, wherever in the world
your system is operating, local technical and service support
will be close at hand. Weidmuller has a well-established international network of either group-company or distributor offices
covering over 50 countries.
High reliability
The words “reliability” and “Weidmuller” are synonymous for
industrial applications. Whichever products you select you can
be certain they are designed, tested and manufactured to the
highest international standards.
Order number:
5655670000/07/2006/DMMD
• Outputs – the common d.c. mA, V ranges, and volt-free
relay contacts are available
• Pluggable connections, which simplify commissioning and
maintenance
• Many international approvals, including CE, UL, CSA, GL
• Global sales and technical support through Weidmuller's
international offices and distributors
P
P
P
P
P
P
A
P
• •
•
• • • • • • • • • • • • • • •
• •
•
•
•
• • • • •
• • • • • • • • •
•
• • •
•
•
• • • • •
• • • • • • • • • • • •
• • • • •
•
•
•
•
•
P
•
P
P
P
• •
•
P
P
P
P
P
P
P
P
P
P
P
• • •
A
A
• • • • • • • • • •
• • • • •
•
•
•
•
•
•
•
•
•
•
•
•
P
A
A
A
• •
P
P
P
P
P
P
P
P
P
• •
P
P
P
P
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• • •
• •
•
•
P
A
• • •
• •
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
WAS5 PRO Thermo
D.43 8560720000
2)
WTS4 THERMO
D.42 8432300000
CNDAR
MAS Thermo-K1000
D.17 8594830000
7940010232
MAS Thermo-J700
D.18 8615210000
7)
WTS4 PT100 (4W)
D.38 8432240000
STG
WTS4 PT100 (3W)
D.37 8432090000
7940011671
WTS4 PT100 (2W)
D.36 8432180000
26
WTS4 PT100 (4W)
WAS5 PRO Bridge
WTS4 PT100 (3W)
D.38 8432270000
Please specify the input range to obtain a catalogue number
For example, “D.44” refers to the page in Catalogue 4 (2006 / 2007) 5650140000, Section D, and “54” refers
to the page in the Mann Series Product Information 565240000.
9)
A
P
•
• •
•
•
•
• •
• •
• •
•
•
•
•
•
•
Mainly Screw Clamp connections are listed, but WAS types also have Tension Clamp (WAZ) options – for
the order numbers please refer to the catalogue in Note 8
Analogue Signals with HART Communications
HART compatible isolator – with transmitter power supply –
in very high density (6 mm W) packaging!
Input device P/S
• • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • •
•
4-20 mA
0/4-20 mA (x 2)
DC mA (zero based)
DC mA – bopolar
Differential mA
DC millivolts
DC Voltage
DC Voltage – bipolar
RTD
Thermocouple
Resistance
Potentiometer
Differential Resistence
Strain gauge / loadcell
Conductivity cell
AC Current
AC Voltage
Frequency
Pulse
Volt-free contact
Proximity sensor
•
• • • • • • • • • • • • • • • • • • •
•
•
•
•
•
•
Active / Passive
Type Selectable
4 Channel
8 Channel
• • •
• • •
• •
•
• • • • • • • • • • • • •
• • •
• • • • • • • •
• •
• • •
•
•
•
•
• • • • • • •
•
• •
D.37 8432150000
A
• • •
•
•
WTS4 PT100 (2W)
P
•
• • • • •
•
•
•
•
P
Input Type
•
•
•
A
Powered
Powered
Powered
Powered
Isolation
Isolation – No. of ports
3
DC inputs
•
•
•
3
• • • • • •
•
• • •
• • •
• • • • • • • • • • • • • • • •
D.36 8432210000
RI4
52
7940017071
2)
URTAR
7940010250
MAS PT100 (0-100)
30
WAS5 PRO RTD 1000
D.16 8594820000
WAS5 VVC
D.30 8540330000
D.39 8679490000
WAS5 VVC HF
D.34 8561610000
WAS5 PRO RTD
WAS5 VVC HF
D.34 8447370000
P
•
D.46 8581200000
•
•
•
•
•
•
2)
•
•
•
•
•
UTCAR
•
•
•
•
7940012190
•
•
•
•
•
•
•
• • • •
•
• • • •
•
•
• • • •
•
•
• • • •
•
•
•
•
30
•
•
•
•
•
D.39 8560700000
WAS4 VVC DC
D.27 8447130000
AI8
WAS4 VCC DC
D.27 8447050000
7940018245
WAS5 VCC HF
D.33 8447310000
48
WAS5 VCC
D.30 8540310000
MCZ VFC
WAS5 VCC HF
D.33 8447340000
7)
8)
8461470000*
WAS5 VCC
D.30 8540290000
Needs a CBX100 interface (Order number 7940010208) to a PC/laptop for configuration
4-20 mA Input number shown - 0-10 V input is different order number. Please refer to the Catalogue.
Order No. has suffix C1D2 on label for CSA Ex
D.7
WAS4 VCC DC
WAS5 CVC HF
D.31 8447220000
D.27 8447100000
WAS5 CVC
D.28 8540270000
MCZ CFC
WAS4 CVC DC
D.26 8447020000
8461480000*
WAS5 CCC HF
D.7
WAS5 CCC
WAS5 CVC HF
D.32 8447280000
D.31 8447160000
WAS5 CVC
D.29 8540230000
D.28 8540180000
WAS4 CVC DC
D.25 8445040000
WAS5 CCC HF
WAS5 CCC HF
D.32 8447250000
D.31 8447190000
WAS5 CCC
D.29 8540200000
WAS5 CCC
WAS4 CCC DC
D.25 8445010000
D.28 8540250000
WAS4 CCC DC
D.25 8444980000
4)
5)
6)
WAS4 CCC DC
MAS RPSH
D.15 8721170000
Specifies 4-20 mA output, but this is V/mA selectable internally
With indicator / front configuration
As 2) but Function Generator
D.26 8446970000
MAS RPS
D.14 8721150000
5)
DFI
7940010167
8
Micromann UPIT (HF)
7940015988
5)
Micromann UPIR (LF)
7940010908
SFI
Micrmann CLCAR
7940010489
7940010212
3)
Micrmann UCVAR
31
2)
MannPak MPC
7940010195
MAS DC/DC Select
D.13 8594810000
7940015297
1)
2)
3)
30
WAS4 PRO DC/DC
D.35 8560740000
12
WAS1 CMA LP
Signifies the approval process is incomplete (May 2006). Please refer to Weidmuller for current status
A different part number is required for this option. Please refer to the catalogue.
MCZ is Tension Clamp Connection only
P
• • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • •
• • • • • • • •
• • • • • • • • • •
• •
• • • • •
•
•
• •
•
•
•
• •
•
•
•
• • • •
• • •
•
•
•
•
•
• •
• • • • • • • • • • • • • • • • • • • • • • • • • • •
• • •
• • •
MCZ CFC
•
•
•
•
•
•
8461490000*
•
•
•
•
•
D.7
•
•
•
•
•
• • • • • • • • • • • •
•
• • • • • • •
•
•
• •
•
•
•
• •
• • •
D.51 8528650000
MCZ PT100/3 CLP
8425720000*
D.6
WAS5 CCC 2OLP
TWI-2
7940010171
D.24 8581160000
TWI-1
7940010159
6
6
WAS5 OLP
D.23 8543720000
4)
ITX Plus
6)
WAS5 CCC LP
D.22 8463580000
7940016563
6)
WAS5 CCC LP
8)
8411190000*
MCZ CCC
Catalogue Page
D.5
9)
• • • • • • • •
• • •
•
•
•
•
•
•
•
•
•
•
• • •
D.22 8444950000
• •
•
•
• •
•
•
•
• •
Product Code
Order Number
•
•
•
•
• •
14
Approvals (April 2006)
CE
cULus
cURus
UR
CSA
Ex (CSA) – C1D2 6)
Ex (UL) – C1D2
GL
GOST
•
•
• • • • • • • • • • •
•
• •
• • •
•
• •
•
•
•
• •
•
•
• • • • •
• • • • •
• • •
•
•
•
• •
• • •
• •
• • •
•
• •
• • •
• • •
• • • •
•
• •
•
•
•
•
•
•
•
•
•
P
Other inputs
• • • •
•
• • •
• • •
•
• • • • • • • • •
A
• • • • •
2
Output
Optional
Adjustable
Selectable
4-20 mA
2 Outputs (0/4-20 mA)
DC mA (zero based)
DC Voltage
Frequency
Linearised output or display
HART compatable
Relay – 4 CO
Relay – 2 CO
Relay – 1 CO
Relay – 2 NO
Open Collector
Approvals (April 2006)
CE
cULus
cURus
UR
CSA
Ex (CSA) – C1D2 6)
Ex (UL) – C1D2
GL
GOST
AMS400
P
2
7940011895
P
3
Order Number
70
P
2
PMX420 Plus
P
3
7940018957
P
Temperature inputs
3
PMX420
P
3
7940018956
P
3
LPD450F
P
3
LPD350
P
3
7940010238
P
3
7940010163
P
3
DI350
P
DC inputs
3
7940010185
P
3
Catalogue Page
2)
P
3
UHZR
P
3
7940015213
P
3
47
P
Other inputs
3
WAS 2 CMR
P
3
D.50 8513340000
P
3
7)
P
3
DPAAVX
P
3
7940017847
P
3
39
P
2
7)
P
Temperature inputs
3
DPA/POT
A
3
7940017851
A
3
41
A
3
7)
A
3
DPA/DRT
• • • •
• • • •
•
•
• • • •
•
•
A
2
7940017919
A
2
42
A
2
7)
P
2
DPA/RES
• • • • • • • •
•
•
• • • • •
P
• • • • • • • • •
2
7940017917
P
2
41
P
2
UTCR
P
2
56
2
54
7
68
3
66
2
62
3
7760000017
3
46
11
7)
2
DPA/TCX
3
7940017853
3
40
3
2)
2
CNDR
2
7940017921
3
47
3
2)
3
URTR
3
7940011087
2
46
2
7)
3
DPA/RTD
3
7940014900
2
40
3
7)
3
DPADCV
P
3
7940011718
P
3
38
P
2
7)
2
DPADMV
3
7940017849
3
38
2
7)
3
DPA/MAS
3
7940016144
2
42
2
WAS5 DC/Alarm
3
D.47 8543820000
3
• •
4-20 mA
2 Outputs (0/4-20 mA)
DC mA (zero based)
DC Voltage
Frequency
Linearised output or display
HART compatible
Relay – 4 CO
Relay – 2 CO
Relay – 1 CO
Relay – 2 NO
Open Collector
*
5
2)
P
• •
•
• • • •
•
•
•
•
Optional
Adjustable
Selectable
•
•
3
DC inputs
Output
The variety of Weidmuller analogue modules which can be
used in Class 1, Division 2 hazardous areas is growing.
3
DC inputs
Input device P/S
Electronics for Hazardous Areas
3
XFAR
3
7940014450
3
47
3
2)
3
UCVR
3
7940010174
2
46
2
7)
P
3
DPADMA
P
4
7940011294
4-20 mA
0/4-20 mA (x 2)
DC mA (zero based)
DC mA – bipolar
Differential mA
DC millivolts
DC Voltage
DC Voltage – bipolar
RTD
Thermocouple
Resistance
Potentiometer
Differential Resistence
Strain gauge / loadcell
Conductivity cell
AC Current
AC Voltage
Frequency
Pulse
Volt-free contact
Proximity sensor
P
2
38
2
Ideal for Stocking – Easy to Configure
ITX plus has a “universal” input – computer configurable via
the CBX100 interface – and is output loop powered.
AC
DC Aux
DC OL
DC IL
• • •
• •
8
PMX420 Plus isn’t just a display, but also a versatile signal
conditioner with analogue and relay outputs.
2
DC inputs
Active / Passive
Type Selectable
4 Channel
8 Channel
NEW – Panel-Mounted Displays and Conditioners
4
•
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
2)
Input Type
2
Power Type
UHZAR
2
Auxiliary Powered
7940010184
Isolation
Isolation – No. of ports
• • • • • • •
Auxiliary Powered
31
• • •
Auxiliary Powered
WAS PRO Freq
AC Powered
DC Aux Powered
DC OL Powered
DC IL Powered
Function Group
WAS2 VMA
Output Loop Powered
Panel Displays
D.44 8581180000
Input Loop
Powered
Trip Amplifiers
D.56 8581220000
Power Type
Isolators / Transmitters
WAS1 CMA
2 Wire Output
D.51 8523400000
Isolators/Transmitters
2 Wire Output
31
Isolators
34
MICROANALOG Interface connects to a PLC / SMS via
multi-pin connectors and makes an 8 channel analogue I/O
connection using just 60 mm of rail width!
Function Group
34
Multi-Channel Analogue-to-PLC Interfacing
Product Code
9)
8)
Portable Testing for Analogue Electronics
The Portacal 1000 is an accurate, light and portable, current /
voltage instrument calibrator.