RF-LAMBDA RFSP3TRDC06G LEADER OF RF BROADBAND SOLUTIONS Reflective Coaxial SP3T Switch DC - 6GHz Features Ultra Wide Band Operation DC-6GHz TTL compatible driver included Fast Switching Speed Low Insertion Loss and High Isolation Temperature Range -45ºC~+85ºC Customization available upon request Hermetically sealed package up to 60,000ft available upon request. Electrical Specifications, TA = +25° C, Vdd = +5V, Control TTL = 0 / +5V PN: RFSP3TRDC06G SP3T Reflective Switch Description High Power Cold Switching Parameters Min Typ Max Units Frequency Range DC-6 Insertion Loss 1.2 Insertion Loss Temperature Coefficient 0.003 dB/ °C 35 dB Isolation 25 GHz 2.0 dB Input VSWR 1.2 1.5 :1 Output VSWR 1.2 1.5 :1 46.5 dBm RF Input power (CW) DC Power Dissipation (CW) 15 W 0.1dB Compression Point (P0.1dB) 46 dBm IIP3 50 dBm Switching Speed 250 ns Weight 1.76 ounces Impedance 50 Ω Bias Current (+5V) 80 mA Input / Output Connectors SMA - Female Finishing Nickel plating Material Aluminum Sealing Hermetically Sealed(optional) RF-LAMBDA USA Sales: sales@rflambda.com Reflective Coaxial Single Pole Three Throw Switch DC-6GHz • • • • • • • www.rflambda.com Technical : support@rflambda.com RF-LAMBDA RFSP3TRDC06G LEADER OF RF BROADBAND SOLUTIONS Absolute Maximum Ratings Environmental Specifications Biasing Voltage +5V±10% Operational Temperature (°C) -45 ~ +85 TTL Control Voltage -0.5~ 0.8V / 2 ~ 5.5V Storage Temperature (°C) -50 ~ +125 Part No ECCN RFSP3TRDC06G EAR99 Description Altitude 60,000 ft. 1.0psi min (Hermetically Seal Un-controlled environment) (Optional) SP3T DC-6GHz PIN Diode Switch Vibration 25g RMS (15 degrees 2KHz) endurance, 1 hour per axis Humidity 100% RH at 35c, 95%RH at 40ºC Shock 20G for 11msec half sine wave, 3 axis both directions Typical Performance Plots Insertion Loss Trc3 S21 dB Mag 2 dB / Ref 0 dB Input VSWR Cal 3 (Max) S21 M110.000000 MHz -1.3248 dB M2 4.000000 GHz -1.2642 dB M3 6.000000 GHz -1.7615 dB 8 Trc1 S11 SWR 500 mU/ Ref 1 U Cal 1 (Max) M110.000000 MHz M2 4.000000 GHz M3 6.000000 GHz S11 5500 1.0840 U 1.1262 U 1.3254 U 6 5000 4 4500 2 4000 0 M1 M2 3500 M3 -2 3000 -4 2500 -6 2000 -8 M3 1500 M2 M1 1000 Ch1 Base Freq Start 10 MHz Base Pwr 0 dBm Stop 6.5 GHz 6/20/2016, 5:16 AM Output VSWR Trc4 S22 SWR 500 mU/ Ref 1 U Ch1 Base Freq Start 10 MHz Base Pwr 0 dBm Stop 6.5 GHz 6/20/2016, 5:16 AM Isolation Cal 4 (Max) Trc2 S12 dB Mag 10 dB / Ref 0 dB S22 M110.000000 MHz M2 4.000000 GHz M3 6.000000 GHz 5500 1.1323 U 1.0593 U 1.2347 U Cal 2 (Max) 0 S12 M110.000000 MHz -69.828 dB M2 4.000000 GHz -33.617 dB M3 6.000000 GHz -27.417 dB -10 5000 -20 M3 4500 M2 -30 4000 -40 3500 -50 3000 Reflective Coaxial Single Pole Three Throw Switch DC-6GHz 30,000 ft. (Epoxy Sealed Controlled environment) Ordering Information -60 M1 2500 -70 2000 -80 1500 M3 M1 -90 M2 1000 Ch1 Base Freq Start 10 MHz 6/20/2016, 5:16 AM Base Pwr 0 dBm Stop 6.5 GHz Ch1 Base Freq Start 10 MHz Base Pwr 0 dBm Stop 6.5 GHz 6/20/2016, 5:18 AM RF-LAMBDA USA Sales: sales@rflambda.com www.rflambda.com Technical : support@rflambda.com RF-LAMBDA RFSP3TRDC06G LEADER OF RF BROADBAND SOLUTIONS Switching Speed Switching Speed All Dimensions in mm [inches] 58.5 [2.30] 2.5 [0.10] 13.88 [0.55] 9.5 [0.37] 4- 2.2[0.09] THRU J0 +5V E3 E2 E1 RF-Lambda 23 [0.91] 33 [1.30] GND RFSP3TRDC06G F:DC-6GHz SN:XXXXXXXXXX 5 [0.20] J3 26 [1.02] J2 13 [0.51] Truth Table J1 3.5 [0.14] 13 [0.51] 53.9 [2.12] Control Signal Path Input TTL State C3 C2 C1 0 1 1 J0-J1 1 0 1 J0-J2 1 1 0 J0-J3 Other states are invalid Control Pin Customization available upon request Reflective Coaxial Single Pole Three Throw Switch DC-6GHz Outline Drawing: Important Notice The information contained herein is believed to be reliable. RF-Lambda makes no warranties regarding the information contained herein. RF-Lambda assumes no responsibility or liability whatsoever for any of the information contained herein. RF-Lambda assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for RF-Lambda products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. RF-Lambda products are not warranted or authorized for use as critical components in medical, life-saving, or life sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. RF-LAMBDA USA Sales: sales@rflambda.com www.rflambda.com Technical : support@rflambda.com