Superior by Design.
Euro-C5 Thermally Broken Aluminum Folding Door System
SUPERIOR BY DESIGN
www.euro-wall.com
888.989.EURO (3876)
S p ec i f i c a t i o n s
Euro-C5 Exterior Aluminum Folding Door System
Maximum / Minimum Specifications
Max Panel Weight:
240 lbs each panel
Min Panel Width:
18”
Max Panel Width:
40”
Min Panel Height:
32”
Max Panel Height:
144”
Door Thickness:
2-1/4”
Max # of Panels:
Unlimited
Euro-C5 Extrusions:
Extruded Aluminum 6063-T5.
Euro-C5 Extrusion Finishes:
1. a) Clear & b) Bronze anodized Class 1.
2. a) Standard Mill Finish available for custom
colors from Euro-Wall.
3. a) White and bronze Kynar Coat finish:
D2000-AAMA 2605.
4. a) Custom Powder Coat finishes available
D3000-AAMA 2604 and 2605.
5. a) Wood Grain finishes (custom): AAMA 2604.
Euro-C5 Hardware:
Stainless Steel (316SS) Components with Aluminum hinges.
Euro-C5 Twinpoint Hardware:
Stainless Steel (304SS) & Aluminum Components.
Euro-C5 Lever Lock Sets:
F-2 Sets Powder Coat over Brass.
Euro-DSD Multi-point Door Locks:
Faceplate, latch and hooks are 304SS.
WARRANTY
NOTE: When using maximum panel width & height
40” x 144” panel may exceed maximum panel weight
of 240 lbs. Calculated weight check should be done.
Euro-Wall
10 Year Warranty
Euro-Wall offers a
complete 10 Year
Warranty. Component
deletions and/or
substitutions are strictly
prohibited. Warranty
is void if system has
missing or substitute
products. Please refer
to www.euro-wall.com/
for our full warranty
information, terms &
conditions, returns &
allowances, claims
policy, and other
general information.
4 STANDARD FRAME & DOOR PANEL FINISHES
White
•
•
•
•
1
Clear
Black
Bronze
NOTE: The colors shown in this brochure give only an
approximation of color and finish. Actual colors and
finishes may vary.
Anodized, Powder Coat or Kynar are available
40 Custom Wood Grain finishes available (not shown)
30 Solid Colors: Custom powder coat finishes available (not showwn)
40 Metallic Custom Powder coat finishes available (not shown)
®
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
F o l d i n g
Code
d oor
p a n e l
o p t i o n s
Opening configuration
2l
2R
2l1r
1l2r
3l
3R
3l1r
1l3r
4l
2l2R
4l1r
3l2r
5l
NOTE: Please note that the configurations below are just
a few examples of the limitless possibilities for Euro-Wall
Folding Door layout options.
3l3r
7l
4l3r
5l2r
5l5r
5l7r
5l9r
5l11r
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
2
Outswing
5/64”
3-13/32”
13/64”
5/64”
3-13/32”
1-7/32”
2-13/32”
13/64”
1-7/32”
19/32”
19/32”
13-64”
T astragal
or MP astragal
PANEL
PANEL
13-64”
T astragal
or MP astragal
23/32”
EXTERIOR
INTERIOR
Pile A/B seal
applied to top
and bottom of
astragal
EXTERIOR
9/32”
13-64”
13-64”
13/64”
13/64”
23/32”
25/64”
1”
19/32”
23/32”
2-1/4”
2-1/4”
25/64”
1”
1-5/32”
weep holes
INTERIOR
Pile A/B seal
applied to top
and bottom of
astragal
9/32”
19/32”
PANEL
23/32”
PANEL
E uro - C 5
C ross
S ect i o n
2-13/32”
Inswing
1-5/32”
weep holes
25/64”
25/64”
Panel to Sill Detail
3
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
E uro - C 5
G l a z i n g
d et a i l s
0.09”
5/8”
1/4”
1/4”
3/16”
3/16”
Sentryglas®
Interlayer
Laminated Monolithic Impact Glass
1” Insulated Glass
Sentryglas® Interlayer
1”
9/16”
Panel Stile
Panel Stile
Top & Bottom Rail
Insulated Impact Glass
Top & Bottom Rail
11/16” Glass
Bite
1/8” Tempered
1/4” Annealed
1” O.A.
0.090”
Sentryglas®
SUPERIOR
by design
1/4” Annealed
11/16
3/8”
brushed sweep
finished
floor line
19/64”
7/16
brushed sweep
1/2”
3/8”
11/16
7/8”
7/16
Panel to Floor Channel Detail
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
finished
floor line
blockout
flooring for
sill channel
Panel to ADA Sill Detail
finished
floor line
4
Features of the euro-C5 Folding Door System
NOTE: A, B & C available in white, satin, black & bronze powder coat finishes.
3L1R
top pivot
active
lock set
B
C5 multi-pont
astragal
intermediate carrier
door panel corner key
8
wall pivot
weatherseals
top pivot
9
8
6
8
C
bottom pivot
4
hinge with
handle
1-3
7
concealed
intermediate
guide
10
5
lever lock set
Euro-C5 hinge gasket
A
Multi-point Door Lock
bottom pivot
twinpoint
weatherseals
• (3 hooks) + top & bottom shootbolts = 5 point
• 3 Hook Model for door heights of up to 8’
• 4 Hook Model for door heights higher than 8’
11.
All aluminum profiles are available in anodized class 1 acid etch clear & bronze
22.
All aluminum profiles are available in powder coat or WCI coat finishes
A
1. 33.
Door panels designed for laminated impact and IG and IG impact glass
Lever Lock Set
2. 44.
Twinpoint hardware in stainless steel (304SS)
3. Door panels designed to hold impact lamnible, I-G and I-G Impact
4. Twinpoint hardware in stainless steel (304SS)
5. Door Panel Corner Key for strenght and security
6. Dual weatherseals on head, jamb, sill & between each panel
7. 55.
66.
77.
Door panel corner key for strength and security
Dual weatherstripping on all door panels and frames
6063-T5 aluminum profiles with polyamide thermal break in Euro-C5 extrusions
88.
Matching color lever lock sets for panels and frame
99.
Stainless steel (304SS) 5 or 6 point MK2 multi-point door lock
8. Color coordinated lever lock sets for active & adjoining panels
9. Five point or six point MK2 Multi-point door lock (304SS) Stainless Steel
5
B
Carrier & Hinge
C
Twinpoint Handle
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
O p t i o n s
Twinpoint assembly is used in securing each pair of folding door
panels in the closed position. Not used on the swing (active) panel.
F INI S H
O P T I O N S
1
2
3
4
5
White Powder Coat
Satin Aluminum
Powder Coat
Clear Anodized
Black Powder Coat
Bronze Anodized
DF3 (Aluminum TwinPoint
Swing Handle) Finishes
Euro Series Lever
Lock Set
Multi-Point Lock
Available Finishes
Available Finishes
(Powder Coat over Brass)
Available Finishes
(Powder Coat over Brass)
1, 2, 4, 5
1, 2, 4, 5
NOTE: The colors shown in this brochure give only
an approximation of color and finish. Actual colors
and finishes may vary.
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
1, 2, 4, 5
Euro Intermediate
Carrier (Shown)
Available Finishes (Hinges)
1, 3, 4, 5
SUPERIOR
by design
6
T est Perfor m a n ce
Met a l l re q u i re m e n ts
AAMA / WDMA / CSA 101 / I.S.2 / A440-08 • NAFS-08
Air Infiltration: A2
Water Leakage Resistance: DP45 or PG45
Wind Load Resistance: DP45 to DP70
SUPERIOR BY DESIGN
888.989.EURO (3876)
E u r o - W a l l S y s t e m s , LL C
www.euro-wall.com
•
•
Port Charlotte, FL 33980
info@euro-wall.com
Proud Member of the American Architectural Manufacturers Association.