List of Publications
International Journals
Year 2016
1. R. Saini, D. Roy, A. K. Das, A. R. Dixit, G. C. Nayak (2016) "Tribological
behaviour and characterization of Ni-WS2 composite coating" International
Journal of Surface Science and Engineering Int. J. Surface Science and
Engineering, Vol. 10, No. 3, pp 240-251 (SCI, IF 0.4489 )
2. D. Roy, A. K. Das, R. Saini, P. K. Singh, P. Kumar, M Hussain, A. Mandal, A. R.
Dixit, “Pulse Current Co-deposition of Ni-WS2 Nano-composite Film for Solid
Lubrication”; Materials and Manufacturing Processes; (SCI journal) Accepted
3. Ashish Srivastava,
Amit Rai Dixit,
Sandeep Tiwari “A Review on
intensification of Metal Matrix Composites and its Non-Conventional
Machining" Science and Engineering of Composite Materials
(Impact Factor 0.515). Accepted
(SCI journal)
4. Ratnesh Kumar; Somnath Chattopadhyay ; Amit R Dixit Bhabhani Bora, M
Zelenak; Josef Foldyna; Sergej Holoch, V. Pedro;; Petr Hlavacek, Jiri Scuka; Jiri
Klich, Sitek Libor “Surface Integrity Analysis of Abrasive Water Jet-Cut Surfaces
of Friction-stir Welded Joints", Int. Journal of Advanced Manufacturing
Technology (SCI IF: 1.458) [Accepted]
5. Anuj Kumar Sharma, Arun Kumar Tiwari, Amit Rai Dixit, “Effects of
Minimum Quantity Lubrication (MQL) in machining processes using
conventional and nanofluid based cutting fluids: A comprehensive review”,
Journal of Cleaner Production, Volume 127, 20 July 2016, Pages 1-18, ISSN
0959-6526, http://dx.doi.org/10.1016/j.jclepro.2016.03.146. SCI IF: 3.59)
(http://www.sciencedirect.com/science/article/pii/S0959652616302293)
6. Ashish Srivastava, Amit Rai Dixit, Sandeep Tiwari (2016) " Investigation of
Microstructural and Mechanical Properties of Metal Matrix Composite
A359/B4C through Electromagnetic Stir Casting" Indian Journal of
Engineering & Materials Sciences (SCI-E IF 0.641) [Accepted]
7. Vikram Sharma, Amit Rai Dixit, Mohd. Asim Qadri and Sanjay Kumar (2016)
“Empirical assessment of the causal relati0onships among lean criteria using
1
List of Publications
DEMATEL method” Benchmarking: an International Journal. Vol 23 No. 6
(Emerald journal) [Scopus database] SJR=0.55
8. Anuj Sharma, Arun K Tiwari; Amit R Dixit (2016) “Rheological Behaviour of
Nanofluids: A Review” Renewable and Sustainable Energy Reviews, Volume
53, January 2016, Pages 779-791 (SCI IF-5.51)
9. Vikram Sharma, Amit Rai Dixit, Mohd. Asim Qadri and Sanjay Kumar (2016)
“Modeling lean implementation for manufacturing sector" Journal of Modelling
in Management Vol 11 (iss.2) (Emerald journal) (In press).
10. Anuj Kumar Sharma, Rabesh Kumar Singh, Arun Kumar Tiwari, Amit Rai Dixit
(2015)
“Characterization
and
Experimental
Investigation
of
Al2O3
Nanoparticle based Cutting Fluid in Turning of AISI 1040 Steel under Minimum
Quantity
Lubrication
(MQL)"
Materials
10.1016/j.matpr.2016.04.090 [Scopus]
Today:
Proceedings,
DOI:
11. Anuj Kumar Sharma, Rabesh Kumar Singh, Arun Kumar Tiwari, Amit Rai Dixit
(2015) “Characterization of TiO2, Al2O3 and SiO2 Nanoparticle based Cutting
Fluids" Materials Today: Proceedings DOI: 10.1016/j.matpr.2016.04.089.
[Scopus]
Year 2015
12. Amitav Mandol Amit R. Dixit, A K Das and Niladri Das (2015) “Modeling and
Optimization of Machining Nimonic C-263 Superalloy using Multicut Strategy
in WEDM " Materials and Manufacturing Processes. Taylor and Francis
DOI: 10.1080/10426914.2015.1048462 (SCI journal IF-1.486)
13. Anuj Sharma, Arun K Tiwari; Amit R Dixit, (2015) “Progress of nanofluids in
machining: A review” Materials and Manufacturing Processes. Volume 30,
Issue 7, July 2015, pages 813-828 (SCI journal IF-1.486)
14. Vikram Sharma, Amit Rai Dixit and Mohd. Asim Qadri and Sanjay Kumar
(2015) “Impact of lean practices on performance measures in context to Indian
machine tool industry” Journal of Manufacturing Technology Management, Vol
26 issue 8. Emerald Publication [Emerging SCI , Thomson Reuter]
2
List of Publications
15. Anuj Kumar Sharma, Arun Kumar Tiwari, Amit Rai Dixit (2015) “Improved
Machining Performance with Nanoparticle Enriched Cutting Fluids under
Minimum Quantity Lubrication (MQL) Technique: A Review" Materials Today:
Proceedings, Volume 2, Issues 4–5, 2015, Pages 3545-3551[Scopus]
16. Anuj Kumar Sharma, Arun Kumar Tiwari, Amit Rai Dixit (2015) “Mechanism of
Nanoparticles functioning and Effects in Machining" Materials Today:
Proceedings, Volume 2, Issues 4–5, 2015, Pages 3539-3544. [Scopus]
17. Rajesh Bajaj, Arun Kumar Tiwari, Amit Rai Dixit (2015) “Current trends in
electric discharge machining using micro and nano powder materials- A Review"
Materials Today: Proceedings, Volume 2, Issues 4–5, 2015, Pages 3302-3307.
[Scopus]
18. Vikram Sharma, Amit Rai Dixit, Mohd. Asim Qadri and sanjay Kumar (2015)
“An interpretive hierarchical model for lean implementation in machine tool
sector” International Journal of Productivity & Quality Management, Vol 15,
No. 3, pp 381-406 [Scopus database] SJR=0.33
Year 2014
19. Sushil Madheshiya, Ashish Srivastava, Amit Rai Dixit, Sandeep Tiwari
(2014) "A Review on Fabrication and Characterization of Composite Material
and its Buckling Analysis through FEM" International Journal of Advance
Research and Innovation ISSN 2347 – 3258, Vol (1) page 185-193.
20. Amitav Mandol and Amit R. Dixit, (2014) “State of Art in Wire Electrical
Discharge Machining Process and Performance" Int. J. of Machining and
Machinability of Materials. V0l. 16, No. 1 pp 1-21 [Scopus] SJR=0.24
Before Year 2013
21. Amit R. Dixit, Manish Gupta(2013) “Current status, enablers & barriers of
implementing cellular manufacturing system in Indian industries” Advances in
Manufacturing, Springer Publisher, Vol 1, no. 4, pp:346-356. [Emerging SCI,
Thomson Reuters]- [Scopus]
3
List of Publications
22. Dixit, A.R. and Mishra, P.K. (2012) Dynamic cellular manufacturing design
and its sensitivity analysis, Int. J. of Applied Management Science, Volume 4,
Issue 3, 2012. [Scopus]
23. Dixit, A.R. and Mishra, P.K. (2010) ‘Cell formation considering real-life
production parameters’, Int. J. Manufacturing Technology and Management,
Vol. 20, Nos. 1/2/3/4, pp.197–221. [Scopus]
24. Dixit, A.R. and Mishra, P.K. (2010) ’Ex-CLASS: Extended Cell formation and
Layout Selection considering production parameters with Sequence data’, Int. J.
Product Development, Vol. 10, Nos. 1/2/3, pp 180-200. [Scopus]
25. Dixit, A.R. and Mishra, P.K. (2008) ’Design of flexible manufacturing cell
considering uncertain product mix requirement’, International Journal of Agile
system and Management, Vol. 3, Nos. 1/2, pp. 37-60 (Scopus).
26. Dixit, A.R. and Mishra, P.K. (2008) ’Flexible manufacturing cell design under
stochastic product mix environment’, International Journal of Applied
Management and Technology, Vol 5, Num-3 pp 125-140.
27. Dixit, A.R. and Mishra, P.K. (2007) ’An efficient algorithm for the machine/part
grouping problem considering machines’ overloading and important
production parameters’, International Journal of Advanced Manufacturing
Systems, Vol 10, No 2,pp 15-36.
4
List of Publications
International/National Conferences:
1. Dixit, A.R. and Mishra, P.K. (2007) ” An Efficient Algorithm for the
Manufacturing Cell Design Considering Machines” Loading and Important
Production Parameters”, Proceeding on Seventh Global Conference on Flexible
Manufacturing systems Management, India, pp 107-127.
2. Dixit, A.R. and Mishra, P.K. (2007) ”Two Phase Heuristic Based Approach in
cellular manufacturing system”, Proceeding on Seventh Global Conference on
Flexible Manufacturing systems Management, India, pp 335-349.
3. Dixit, A.R. and Mishra, P.K. (2007)”Flexible manufacturing cell design under
stochastic product mix environment” International Conference on Advanced
Manufacturing Engineering (ICAME2007), India, 24-26 October 2007.
4. Dixit, A.R. and Mishra, P.K. (2007)”Heuristic Based Approach of Cell
Formation Considering Operation Sequences”, International Conference of
Manufacturing Engineering and Engineering Management, London, 2-4 July
2007. ICMEEM-44 The World Congress on Engineering 2007 Proceedings
book Volume-II (978-988-98671-2-6) PP 1101-1107.
5. Dixit, A.R. and Mishra, P.K. (2004) ”Machine Cell Formation Using Genetic
Algorithm”, Proc. of the National Conference on Advanced Manufacturing and
Robotics held at Central Mechanical Engineering Research Institute,
Durgapur, West Bangal, India, 10-11 January, pp.293-299.
6. Agarawal S., Tiwari S., Dixit, A. R. “Biomedical System, Application in
Predeiction of Earthquake” International Conference on Dynamic system &
Application, Turkey, 5-10 July 2004.
7. Dixit, A.R., Gupta Manish, Narian Rakesh (2009) “Role of Information
Technology in E-Procurement” National seminar on “Recent advances on
information technology (RAIT-2009)”, held at ISMU, Dhanbad (Feb 6-7,
2009)
8. Alok Kumar Das, Sambit Kumar Parida, Amit Rai Dixit, Partha Saha, C. S.
Kumar (2011) “A vision system for online measurement of diameter of
micro-tool
in
micro-electrochemical
5
machine”,
Proceedings
of
24 th
List of Publications
International congress on Condition Monitoring and Diagnostic Engineering
Management (COMADEM2011), University of Stavanger, Norway,PP. 11971204.
9. Amit
Rai
Manufacturing
Dixit, P. K.
Cell Design
Mishra, Alok Kumar Das
under
Uncertain
(2011) “Robust
Product-Mix
Demand”,
Proceedings of 24th International congress on Condition Monitoring and
Diagnostic Engineering Management (COMADEM2011), University of
Stavanger, Norway,PP. 1549- 1558.
10. Brajesh Kumar, Alok Kumar Das, Amit Rai Dixit (2012) “Study of Surface
Integrity of Surfaces Machined by Electrochemical Machining Process”,
Proceedings of National Seminar on “Mining Equipment: Challenges &
Application” (MENTCA-2012), ISM, Dhanbad, India.
Year 2013
11. Vikram Sharma, Amit Rai Dixit and Mohd. Asim Qadri (2013) “Statistical
Analysis of Survey Data to Establish Strategies for Manufacturing
Excellence”, National Conference on Recent Advances in Mathematics and
Its Applications (RAMA-2013) during Feb., 14-16, 2013 at ISM Dhanbad,
India pp:.
12. Amitava Mandal, Amit Rai Dixit, Biswanath Doloi, Dipankar Bose (2013)
“Parametric Analysis for Optimization of Machining Characteristics
Using Statistical Technique in Non-Traditional Machining Process”
National Conference on Recent Advances in Mathematics and Its Applications
(RAMA-2013) during Feb., 14-16, 2013 at ISM Dhanbad, India pp:
13. Vikram Sharma, Amit Rai Dixit and Mohd. Asim Qadri (2013) “Lean
Manufacturing
Paradigm
for
Indian
Manufacturing
Industry”,
International Conference On Manufacturing Excellence,(MANFEX 2013, ISBN
978-93-83083-17-6 organized by AMITY university Noida, Indian on 30-31
May 2013 pp.138—143.
6
List of Publications
14. Saurav, Sumit and, Dixit, A. R. (2013) “Quantitative analysis of incorporating
production parameters in cellular layout planning”, International Conference
on Industrial Engineering, organized by S.V. National Institute of Technology,
Surat and Indian Institute of Industrial Engineering(IIIE), Mumbai 20-22
November, 2013 pp:. (accepted)
15. P. Singh*, A. Mandal, A.R. Dixit and A. K. Das (2013) “Experimental
Techniques in Optimizing Process Parameters of WEDM Operation: A
review” Proceeding in National Conference on Recent Advancements in
Mechanical Engineering NERIST, Itanagar, India 8 - 9 November 2013, pp
117-126
16. A K Das, A R Dixit A Mandol “TRIBOLOGICAL BEHAVIOR AND
CHARACTERIZATION OF Ni-WS2 COMPOSITE COATING” International
Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING
(COPEN-8: 2013) to be held in the Department of Mechanical Engineering,
National Institute of Technology Calicut, India, during 13 th to 15th December,
2013.
17. Satyajit Mahato, Amit Rai Dixit, Rajeev Agarwal (2013) “Achieving Process
Excellence In Field Quality Through DMAIC Road Map Of Lean Six Sigma”
National Seminar on Effectiveness, Ethics and Sustainability: The Measures of
Organisational Excellence (NSEES 2013) during December 6 & 7, 2013
organised by Department of Management Studies, ISM Dhanbad
Year 2014
18. Sushil Madheshiy*, Ashish Srivastava*, Amit Rai Dixit, Sandeep Tiwari
(2014) “A Review on Fabrication and Characterization of Composite Material
and its Buckling Analysis through FEM” International Conference of Advance
Research and Innovation (ICARI-2014) Organized By International Journal of
Advance Research and Innovation, Institution of Engineers (India), Delhi
State Centre, (Engineers Bhawan), 1.2.2014
7
List of Publications
19. Mayank Kahyap, , Ashish Srivastava, Amit Rai Dixit, Sandeep Tiwari,
Shubham Sharma (2014) “A REVIEW ON NON-CONVENTIONAL MACHINING
OF METAL MATRIX COMPOSITES OF ALUMINIUM ALLOY “ 2nd International
Conference on ‘Technological and Management Advances in the New Age
Economy: An Industry Perspective’ Mangalmay institute of Engineering and
Management, Gr. Noida.
20. Laxmi Kant, A R Dixit, A K Das and A Mandal (2014)” Multiobjective
optimization of Cutting parameters for turning operation of EN36B Steel
using Taguchi Method” International Conference on Advance Research in
Engineering and Technology (ICARET-2014) Tamil Nadu, 18 th April- 19th
April 2014, pp42-46.
Year 2015
21. Anuj Kumar Sharma, Rabesh Kumar Singh, Arun Kumar Tiwari, Amit Rai Dixit
(2015) “Tribological Investigation of TiO2 Nanoparticle based Cutting Fluid in
Machining under Minimum Quantity Lubrication (MQL) " Recent Advances In
Nano-Science And Technology (RAINSAT-2015), Sathyabama University, India,
during July 8th - 10th, 2015 in association with CSIR-CLRI, India.
22. Rajesh Bajaj, Arun Kumar Tiwari, Amit Rai Dixit (2015) “Progress of
micro/nano powder mixed electric discharge machining: A Review" Recent
Advances In Nano-Science And Technology (RAINSAT-2015), Sathyabama
University, India, during July 8th - 10th, 2015 in association with CSIR-CLRI,
India.
23. Avadh Kishor Prasad, A Mandol, A K Das, A R Dixit “INVESTIGATION INTO
FIBER LASER CUTTING OF STAINLESS STEEL SS304” International
Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING
(COPEN-9: 2015) held IIT Mumbai , India, during 10th to 12th December,
2015.
Year 2016
8
List of Publications
24. Satyajit Mahato, Amit Rai Dixit, Rajeev Agarwal (2016) “Process excellence
in IT sector in an emerging economic scenario” 3rd IEEE International
conference on Recent Advances in Information Technology,(3-5 March
2016), ISM Dhanbad
25. Anuj Kumar Sharma, Arun Kumar Tiwari, Amit Rai Dixit, Rabesh Kumar Singh
(2015) “Investigation into Performance of SiO2 Nanoparticle Based Cutting Fluid
in Machining Process" 5th International Conference on Materials Processing and
Characterization (ICMPC-2016) 12-13 March Hyderabad, India
26. Kamlesh paswan, Rachit Ranjan, Shakuntala Hembram; Rajesh Bajaj, Amit Rai Dixit,
“EXPERIMENTAL INVESTIGATION ON MACHINING PERFORMANCE USING
DEIONIZED WATER AS DIELECTRICIN DIE-SINKING EDM” , 2nd International
Conference on Design, Analysis, Manufacturing and Analysis ICDAMS 2016;
Chennai 7-8 April 2016. pp 215-221.
27. Rabesh Kumar Singh, Anuj Kumar Sharma, , Amit Rai Dixit, Arun Kumar Tiwari ,
Amitava Mandol “Preparation and characterization of nanoparticles mixed
cutting fluids” International Conference on Materials Science & Technology;
2016,
1-4 March ;New Delhi , India [www.vbripress.com/icmtech, DOI:
10.5185/icmtech.2016;Published online by the VBRI Press in 2016]
28. Shakti Kumar, Rabesh Kumar Singh ,Amit Rai Dixit, Amitava Mandol, Alok Kumar
Das “Response prediction in machining of AISI 1040 stainless steel using ANN
model” 2nd International Conference on Design, Analysis, Manufacturing and
Analysis, ICDAMS 2016 Chennai [7-8 April 2016] page no. 243-251
[Presentated and accepted for publication in Scopus journal]
9