Market leading
controls for 2016
Intuitive & user-friendly interface
Cross pillar integration
Cloud control
Smart energy management
Integration of Daikin and third party products
Mini BMS for medium
to large commercial buildings
› Price competitive mini BMS
› Cross-pillar integation of Daikin products
› Integration of third party equipment
via WAGO or BACnet
› Connect up to 2,560 indoor units groups
more information on page „Functions overview“ op
pagina 485
Advanced centralised controller
with Cloud connection
› Simply control your entire building centrally
› Total solution concept (integration of Split, Sky Air, VRV, ventilation,
air curtains and hot water)
› Stylish optional screen fits any interior
› Cloud connection offers additional services
such as online control, energy monitoring, comparison of energy
consumption of multiple sites
› Connect up to 32 indoor units groups
more information on page „Advanced centralised
controller with Cloud connection“ op pagina 482
Find out more on www.daikineurope.com
470
Control Systems
Control Systems
Individual control systems
Wired / infrared remote controls
Siesta Sky Air
Online controller
475
476
477
478
Centralised control systems
Centralised remote control /
Unified ON/OFF control / Schedule timer
Adapter DTA113B51
480
NEW Advanced centralised controller
with cloud connection
Wireless room temperature sensor
Wired room temperature sensor
Other integration devices
Options & Accessories
496
496
497
498
480
481
481
482
Mini building management system
484
484
Standard protocol interfaces
Modbus interface
KNX Interface
BACnet Interface
LonWorks Interface
486
486
490
491
491
Daikin Configuration Software
EKPCCAB3
493
493
Remote monitoring and maintenance
For latest data, please consult my.daikin.eu
471
CONTROL
SYSTEMS
494
Control solutions summary
Requirement tables per application
Daikin offers various control solution adapted to the requirements of even the most demanding commercial application.
› Basic control solutions for those customers with few
requirements and limited budget
› Integrating control solutions for those customers
that would like to integrate Daikin units into their
existing BMS system
› Advanced control solutions for those customers
that expect Daikin to deliver a mini BMS solution,
including advance energy management
NEW
Unit control
Shop
Automatic control of A/C
Limited control possibilities for shop staff
Integrating control
BRC1E52A/B
RTD-20
1 remote
controller for
1 indoor unit
(group)
1 gateway for
1 indoor unit
(group)
y
y
y
y
y
y
Create zones within the shop
Interlock with eg. Alarm, PIR sensor
RTD-Net
KLIC-DI
1 gateway for 1 1 gateway for 1
indoor unit
indoor unit
y
y
Advanced control
EKMBDXA
DCC601A51
DCM601A51
1 gateway for
max. 64 indoor
unit(s) (groups)
& 10 outdoors
1 unit for 32
indoor unit(s)
(groups)
1 iTM for 64
indoor unit(s)
(groups) (1)
y
y
y
y
y
y
y
y
y
y
y
y
y
Integrate Daikin units into existing BMS via Modbus
y
y
Integrate Daikin units into existing BMS via KNX
y
y(2)
y(2)
y
Integrate Daikin units into existing BMS via HTTP
Monitor energy consumption
Advanced energy management
Allows free cooling
y
y
y
y
y
y
Integrate Daikin products cross pillars
into Daikin BMS
y
y(2)
y(2)
Integrate third party products into Daikin BMS
Online control
Manage multiple sites
(1) : 7 iTM plus adapters (DCM601A52) can be added to have 512 indoor groups and 80 outdoor (systems) (2) Via cloud control
Hotel
Unit control
BRC2/3E52C
Integrating control
RTD-Net
1 remote controller
1 gateway for 1
for 1 indoor unit
indoor unit (group)
(group)
Hotel guest can control & monitor basic functionalities from his room
Limited control possibilities for hotel guests
Interlock with window contact
Interlock with key-card
Integrate Daikin units into existing BMS via Modbus
y
y
y(2)
y(2)
y
y
DCS601C51
DCM601A51
1 gateway for 1
indoor unit
1 iTC for 64 indoor
unit(s) (groups)
1 iTM for 64 indoor
unit(s) (groups) (1)
y
y
y
y
y
y
y
y
y
Integrate Daikin units into existing BMS via KNX
Integrate Daikin units into existing BMS via HTTP
Monitor energy consumption
Advanced energy management
Integrate Daikin products cross pillars into Daikin BMS
Integrate third party products into Daikin BMS
Online control
(1) : 7 iTM plus adapters (DCM601A52) can be added to have 512 indoor groups and 80 outdoor (systems) (2) Via BRP7A51 adapter
472
Advanced control
KLIC-DI
y
y
y
y
y
y
y
Control solutions summary
Office
Unit control
BRC1E52A/B
1 remote
controller for
1 indoor unit
(group)
Automatic control of A/C
y
Centralised control for management
Local control for office workers
Limited control possibilities for office workers
y
y
Integrating control
EKMBDXA
DMS504B51
Advanced control
DMS502A51 /
DAM412B51
DCS302C51 /
DST301B51
1 gateway for
1 gateway for
1 R/C for max.
1 gateway for
max. 64 indoor
128 indoor
64 groups, 128
64 indoor unit(s)
unit(s) (groups)
unit(s) (groups), indoor units, 10
(groups)
& 10 outdoors
20 outdoors (2)
outdoors
y
y
y
y
y
y
y
y
y
y (3)
y
y
DCS601C51
DCM601A51
1 iTC for 64
indoor unit(s)
(groups)
1 iTM for 64
indoor unit(s)
(groups) (1)
y
y
y
y
y
y
y
y
y
Integrate Daikin units into existing BMS via Modbus
Integrate Daikin units into existing BMS via KNX
y
Integrate Daikin units into existing BMS via HTTP
y
Integrate Daikin units into existing BMS via LonTalk
y
Integrate Daikin units into existing BMS via BACnet
Energy consumption read out
y
y
y
y
y
y
Monitor energy consumption
Advanced energy management
Integrate Daikin products cross pillars into Daikin
BMS
Integrate third party products into Daikin BMS
Online control
(1) : 7 iTM plus adapters (DCM601A52) can be added to have 512 indoor groups and 80 outdoor (systems)
(2) : extension needed to go to 256 indoor unit(s) (groups), 40 outdoors
(3) : ON/OFF only
NEW
launch Spring
2016
Infrastructure cooling
Automatic control of A/C
Back-up operation
Duty rotation
Limited control possibilities in the technical cooling room
If room temperature above max., then show alarm & start standby
unit.
If an error occurs, an alarm will be shown.
Unit
Integrating
Advanced
BRC1E53A/B/C
RTD-10
DCM601A51
1 remote
controller for
1 indoor unit
(group) (2)
1 gateway for
up to 8 indoor
units (group)
1 iTM for 64
indoor unit(s)
(groups) (1)
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
473
CONTROL
SYSTEMS
(1) : 7 iTM plus adapters (DCM601A52) can be added to have 512 indoor groups and 80 outdoor (systems) (2) Infrastructure cooling functions only
compatible with indoor units connected to Seasonal Smart outdoor units.
Controllers
ONLINE
CONTROLLER
WIRED REMOTE CONTROL
BRC1E52A/B
INTELLIGENT
TOUCH MANAGER
DCM601A51
INFRARED REMOTE
CONTROLLER

Individual control systems
BRC1E52A/B
User friendly remote control with
contemporary design
A series of energy saving functions that
can be individually selected
Graphical display of indicative
Other functions
› Up to  independent schedules can be set,
so the user can easily change the schedule himself
throughout the year (e.g. Summer, winter, mid-season)
› Possibility to individually restrict menu functions
Easy to use: all main functions directly accessible
› Easy setup: clear graphical user interface for
advanced menu settings
› Real time clock with auto update to daylight
saving time
› Built-in backup power: when a power failure occurs
all settings remain stored up to  hours
› Supports multiple languages:
English, German, Dutch, Spanish, Italian, Portuguese,
French, Greek, Russian, Turkish, Polish (BRCEA)
English, German, Czech, Croatian, Hungarian,
Romanian, Slovenian, Bulgarian, Slovak, Serbian and
Albanian (BRCEB)
› Temperature range limit
› Setback function
› Presence & floor sensor connection
(available on round flow and fully flat cassette)
› kWh indication
› Set temperature auto reset
› Off timer
electricity consumption
(Function available in
combination with FBQ-D,
Temperature range limit avoids excessive
heating or cooling
FCQG and FCGHQ)
Save energy by constraining the lower temperature
limit in cooling and upper temperature limit in
heating mode.
note : Also available in auto cooling/heating change over mode.
kWh indication keeps track of
your consumption
The kWh indication shows an indicative electricity
consumption of the last day/month/year.
BRC2E52A / BRC3E52A
Simplified wired remote control developed
for hotel applications
›
›
›
›
BRCEA
Symbol driven interface for intuitive control
Functions restricted to basic customer needs
Contemporary design
Energy saving thanks key card, window contact
integration and set point limitation (BRPA)
› Flexible setback function ensures room temperature
remains within comfortable limits to ensure guest
comfort
› Flat backpanel for easy installation
› Easy commissioning: intuitive interface
for advanced menu settings
›  versions available:
t Heat pump type: temperature, fan speed, ON/OFF
t Heat recovery type: temperature,
mode, fan speed, ON/OFF
› Replaces existing BRCC & BRCA
Heat recovery type
BRCEA
Heat pump type
P1 P2
Adaptator
(BRPA)
Key card (field supply)
Window contact
(field supply)
475
CONTROL
SYSTEMS
Key card and
window contact
integration
Individual control systems
Individual control systems
BRC073
Wired remote control
for residential use
BRC
› User friendly remote control with
contemporary design
› Easy to use: all main functions directly accessible
› Easy commissioning: intuitive interface
for advanced menu settings
› Optimise your air conditioning system by activating
a series of energy saving functions (temperature
range limit, setback function, off timer, …)
› Set up to  independent schedules, so the user can
easily change the schedule himself throughout
the year (e.g. summer, winter, mid-season)
› Real time clock with auto update to daylight
saving time
› Supports multiple languages (English, German,
French, Italian, Spanish, Portuguese, Dutch,
Czech, Croatian, Hungarian, Slovenian, Romanian,
Bulgarian, Russian, Greek, Turkish, Polish, Serbian
and Slovak) (depending on language package)
› Possibility to individually restrict menu functions
› Possibility to individually restrict each button
› Possibility to individually restrict each operation
mode (Cooling, Heating, Auto, etc.)
› When a power failure occurs all settings
remain stored up to  hours thanks to the built-in
backup power
› Setback operation maintains the indoor
temperature at your specified comfort level during
absence, thus saving energy
Note : Cable for wired remote control BRCWA (m) or
BRCWA (m) required
BRC1D52
Wired remote control
› Schedule timer:
Five day actions can be set as follows:
- set point: unit is switched ON and
normal operation is maintained
- OFF: unit is switched OFF1
- limits: unit is switched ON and min./max. control
(cf. limit operation for more details)
BRCD
› Home leave (frost protection): during absence, the
indoor temperature can be maintained at a certain
level. This function can also switch the unit ON/OFF
› User friendly HRV function, thanks to
the introduction of a button for ventilation mode
and fan speed
› Constantly monitoring of the system for
malfunctions in a total of  components
› Immediate display of fault location and condition
› Reduction of maintenance time and costs
Display
›
›
›
›
›
›
›
›
›
›
›
›
›
Operating mode
Heat Recovery Ventilation (HRV) in operation
Cool / heat changeover control
Centralised control indication
Group control indication
Set temperature
Air flow direction
Programmed time
Inspection test / operation
Fan speed
Clean air filter
Defrost / hot start
Malfunction
ARC4*/BRC4*/BRC7*
Infrared remote control
Operation buttons: ON / OFF, timer mode start / stop,
timer mode on / off, programme time, temperature
setting, air flow direction (1), operating mode, fan
speed control, filter sign reset (2), inspection (2)/ test
indication (2)
Display: Operating mode, battery change, set
temperature, air flow direction (1), programmed time,
fan speed, inspection / test operation (2)
ARCA
476
BRC*/BRC*
. Not applicable for FXDQ,
FXSQ, FXNQ, FBDQ, FDXS, FBQ
. For FX** units only
. For all features of the remote
control, refer to the operation
manual
Individual control systems
ARCWLA / ARCWB
Siesta individual control systems
Overview controllers for Siesta Sky Air
Siesta Sky Air indoor units
Controllers
ACQ-D 4-way blow, ceiling mounted cassette
t Standard infrared remote control (ARCWLA) in box of
decoration panel ADP125A
t Wired remote control ARCWB
t Optional group controller R04084124324
AHQ-C ceiling suspended
t Standard infrared remote control in box of indoor unit ARCWLA
t Wired remote control ARCWB
t Optional group controller R04084124324
ABQ-C concealed ceiling
t Standard wired remote control (ARCWB) in box of indoor unit
t Optional group controller R04084124324
Overview of features
Feature
ARCWB
AHQ-C and ACQ-D / Standard for ABQ-C
2
ARCWB
3
ON/OFF switch
Default range 16-30°C
Temperature setting
Optional range 20-30°C
Switch between °C and °F
Room temperature sensor on remote control
-
t
-
4
Cool / Fan dry / Heat / Auto
5
Sleep mode
-
6
Fan Speed selection
-
tt
7
Delay timer
8
7-days programmable timer
-
9
Real time clock display
-
10
Air swing selection
ON/OFF swing mode
Change swing option
(draft/soil prevention or
standard)
-
11
LCD display without backlight
-
12
Key lock
-
13
-
15
Error code indication
IR receiver to enable compatibility with infrared remote control
(disabled when lock function is activated)
Last state memory from indoor PCB
16
Silent mode
17
Turbo mode
t
t
14
-
18
Compressor test model (compressor force ON)
-
19
Daikin inverter error code
-
20
UART communication port (for Daikin protocol)
-
21
Backup battery
-
Specifications
› Dimensions (length x width x height) ARCWB:
. m x . m x . m.
› ARCWB comes standard with a  metre cable,
which can be extended to maximum cable length
of  metres. ARCWB can only control one indoor
unit at a time; group control is only possible when
using option R.
-
Standard
t
tt
By dipswitch selection
,  &  hours delay
477
CONTROL
SYSTEMS
1
Individual control systems
Online controller
BRP069A41/42/43/45
Always in control,
no matter where you are
The plug-and-play Online Controller allows you to set
and even schedule the temperature from anywhere
using Apple or Android systems. So you can manage
the unit when away from home, offering optimal
climate control while saving energy.
1
WLAN adaptor
2
Smartphone
3
Tablet
With the Daikin Online Controller application in
combination with the plug-and-play wireless LAN
device and an active internet connection, you can
manage your unit from anywhere, offering optimal
climate control while saving energy.
The Daikin Online Controller application can control
and monitor the status of up to 50 units and allows
you to:
› Monitor the status of your heat pump unit
› Control the operation mode, set temperature,
air flow rate and direction
› Schedule the set temperature and operation mode
with up to  actions per day for  days
478
Individual control systems
Connectable indoor units
BRP069A41
BRP069A42
BRP069A43
BRP069A45
› FTXG-LW/S
› FTXJ-MW/S *
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
›
› FTX--KV
› FTX-KV
› ATX-KV
FTXZ-N
FTXS--K
FTXS-G
FTXM--K
FTX--GV
FTXLS-K
FVXG-K
FVXS-F
FLXS-B()
ATXS-K
CTXS-K
FTXS-K
FTXM-K
FTX--J
FTXL-JV
ATXS-K
ATX-J
ATXL-JV
* controller included with the unit
Features Online Controller
The Daikin online controller can manage your unit in several ways.
Feature
Start/stop operation
Set operation mode:
- Automatic
- Cooling
- Heating
- Fan only
- Dry
Set temperature point
Set weekly schedule timer
Available actions: Start/stop operation, select
operation mode, set temperature set point.
Maximum  actions per day ( actions total).
Set air flow rate
Set air flow direction
Readout current room temperature
Readout current outdoor temperature
Readout current humidity
Readout smartphone application version
Readout wireless adapter firmware version
Readout error code (if any)
Set custom adapter name
Disable/enable adapter LED’s
Child lock function
Connection test function
Remote adapter software updates
Automatic daylight saving time function
Demo function (internet connection required)
In-home operation
Out-of-home operation
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
479
CONTROL
SYSTEMS
You can operate it in-home by connecting your smartphone to a private wireless
network or out-of-home by connecting your smartphone to a mobile network
(e.g. 3G) or an external wireless network.
Centralised control systems
Centralised control of the Sky Air and VRV system can be achieved via 3 user friendly compact remote
controllers. These controls may be used independently or in combination with 1 group = several (up to 16)
indoor units in combination and 1 zone = several groups in combination.
A centralised remote control is ideal for use in tenanted commercial buildings subject to random occupation,
enabling indoor units to be classified in groups per tenant (zoning).
The schedule timer programmes the schedule and operation conditions for each tenant and the control can
easily be reset according to varying requirements.
DCS302C51
Centralised remote control
Providing individual control of  groups (zones) of indoor units.
 a maximum of  groups ( indoor units, max.  outdoor units)
can be controlled
 a maximum of  groups ( indoor units, max.  outdoor units)
can be controlled via  centralised remote controls in separate
locations
 zone control
 group control
 malfunction code display
 maximum wiring length of ,m (total: ,m)
 air flow direction and air flow rate of HRV can be controlled
 expanded timer function
DST301B51
Schedule timer
Enabling 64 groups to be programmed.




a maximum of  indoor units can be controlled
 types of weekly schedule
a maximum of  hours back up power supply
a maximum wiring length of ,m (total: ,m)
DCS301B51
Unified ON/OFF control
Providing simultaneous and individual control of 16 groups
of indoor units.





480
a maximum of  groups ( indoor units) can be controlled
 remote controls in separate locations can be used
operating status indication (normal operation, alarm)
centralised control indication
maximum wiring length of ,m (total: ,m)
Centralised control systems
DTA113B51
Basic solution for control of Sky Air and VRV
 Rotation function
 Backup operation function.
adapter - DTAB
BRCEDA/B
Up to  units /  adapter
DCS601C51
Detailed & easy monitoring and operation of VRV systems (max. 64 indoor units groups).
third party controller (domotics, BMS, etc.) via http interface
Fire alarm
Ethernet
Forced OFF contact input
DIII-NET
Indoor units
HRV
DCSC
System layout
 Up to  indoor units can be
controlled
 Touch panel (full colour LCD
via icon display)
Control
 Individual control
(set point, start/stop,
fan speed)
(max.  groups/indoor units)
 Set back shedule
 Enhanced scheduling function
( schedules,  patterns)
 Flexible grouping in zones
 Yearly schedule
 Fire emergency stop control
 Interlocking control
 Increased HRV monitoring and
control function
 Automatic cooling / heating
change-over
 Heating optimization
 Temperature limit
 Password security:  levels
(general, administration
& service)
 Quick selection and full
control
 Simple navigation
Monitoring
 Visualisation via Graphical User
Interface (GUI)
 Icon colour display change
function
 Indoor units operation mode
 Indication filter replacement
 Multi PC
Cost performance
 Free cooling function
 Labour saving
 Easy installation
 Compact design: limited
installation space
 Overall energy saving
Open interface
 Communication to any third
party controller (domotics,
BMS, etc.) is possible via
open interface (http option
DCSA)
Connectable to
 VRV
 HRV
 Sky Air
 Split (via interface adapter)
481
CONTROL
SYSTEMS
Languages
 English
 French
 German
 Italian
 Spanish
 Dutch
 Portuguese
NEW Centralised control systems
DCC601A51
Advanced centralised controller
with Cloud connection
r Intuitive and user-friendly interface
r Flexible concept for stand alone
and multi site applications
r Total solution thanks to
integration of 3rd party equipment
r Monitor & control your small
commercial building, no matter
where you are
2 solutions:
Local solution
› Offline centralized control
via stylish optional screen
› Stylish interface fits any interior
Cloud solution
› Flexible online control from any device (Laptop,
tablet...)
› Monitor & control one or multiple sites
› Benchmark the energy consumption of different
installations
› Energy consumption follow-up to comply
with local regulations
System layout
Local solution
Online control from any device
Alarm
Window
contact
Daikin supplied screen
(optional) (for local control)
DAIKIN CLOUD
Pulse input
Z380C-1A023A
or
Digital input
Local network
Daikin supplied router
(optional) 4G-N12
DCC601A51
WAGO power
supply
CPU module
I/O module
Split,
,
VAM, ventilation,
air curtains
482
,
…
Centralised control systems NEW
Total solution
› Total solution thanks to a large integration of
Daikin products and 3rd party equipment
› Connect a wide range of Daikin units (Split, Sky Air,
VRV, Ventliation, air curtains)
› Simply control your entire building centrally
› Increased customer shopping experience by better
management of your shop comfort level
From one to ∞ sites
LOCAL
CONTROL
Daikin Cloud services
› Control your building no matter where you are
› Monitor and control multiple sites
› Installer or technical manager can remotely login
to the site in case of malfunctions for first trouble
shooting
› Benchmark the energy consumption
of different installations
› Manage & track your energy use
› Monitor the long time operation units to keep
the consumption under control
DAIKIN CLOUD
Installer/
technical manager
Customer
User friendly touch control
› Stylish Daikin supplied optional screen
for local control fits any interior
› Intuitive and user-friendly interface
› Full solution with simple control
› Easy commisioning
Flexible
Pulse input
› Inputs via digital and pulse input for 3rd party
equipment such as kwh meters, emergency input,
window contact, …
› Modular concept allows your cloud to grow
with your business
› Control up to 32 indoor unit groups
Digital input
Indoor uit
Functions overview
Languages
EN, FR, DE, IT, ES, NL, PT
System layout
N° of connectable indoor unit groups
Local solution
Cloud solution
32
32
Multiple sites control
Monitoring &
control
Basic control functions (ON/OFF, mode, filter sign, setpoint, fan
speed, ventilation mode, …)
Remote control
prohobition
All devices ON/OFF
Group control
Weekly schedule
Interlock control
Set point limitation
Vizualiasation of energy use per operation mode
Error e-mail
DX split, Sky Air, VRV
VAM, VKM ventilation
Air curtains
483
CONTROL
SYSTEMS
Connectable to
Mini Building Management System
DCM601A51
Mini BMS
• Price competitive mini BMS
• Cross-pillar integration of Daikin products
• Integration of third party equipment
with full integration
across all product pillars
System overview
Web Access
CLOUD
Internet
Extranet
LAN
3G
http interface
Integration of third
party equiqment
Full control of Daikin
HVAC-R portfolio
DCM601A51
ITM plus adaptor line
Max. 7
adapters
Di/Pi line
Fire alarm
Max. 200m
DCM601A52
Di/Pi port
kWh meter
Direct plug & play connection!
indoor units,
air curtain,
Lighting
Fan
Pump
Sensor
Multi state objects
Elevator

Air handling unit
Alarm
I/O module
I/O module
hydrobox,
air handling units
Chillers and AHU
WABO
interface
Fan coil units
BACnet
protocol
Referigeration
Split
Mini Building Management System
User friendliness
› Intuitive user interface
› Visual lay out view and direct access to indoor unit
main funtions
› All functions direct accessible via touch screen
or via web interface
Smart energy management
› Monitoring if energy use is according to plan
› Helps to detect origins of energy waste
› Powerful schedules guarantee correct operation
throughout the year
› Save energy by interlocking A/C operation with other
equiment such as heating
Plug & play
Flexibility
Split
Fan coils
› Cross-pillar integration (heating, air conditioning,
applied systems, refrigeration, air handling units)
› BACnet protocol for rd party products integration
› I/O for integration of equipment such as lights,
pumps… on WAGO modules
› Modular concept for small to large applications
› Control up to , indoor unit groups
BACnet
protocol
Easy servicing and commissioning
Lighting
Lighting
Chillers and AHU
Pump
Pump
Fan
Fan
WAGO I/O
Lighting
› Remote refrigerant containment check preventing
on site visit
› Simplified troubleshooting
› Save time on commissioning
thanks to the pre-commissioning tool
› Auto registration of indoor units
Sensor
Sensor
Refrigeration
Air handling
unit
Air handling
unit
Lighting
Pump
Pump
Fan
Alarm
Elevator
Fan
Alarm
Sensor
Sensor
Flexibility in size
64 up to 2,560 groups
Functions overview
Languages
Management
Control
› English
› Web access
› Individual control
› French
› Power Proportional
› Italian
› Spanish
› Dutch
› Portuguese
Distribution (option)
› Operational history
(malfunctions, operation hours, …)
- Daikin AHU
schedule, yearly calender,
- Fan coils
seasonal schedule)
- Daikin Altherma Flex type
- LT and HT hydroboxes
- monitor if energy use is
› Setpoint limitation
- Air curtains
according to plan
› Temperature limit
- WAGO I/O
- detect origins of energy
› Up to , unit groups can
waste
be controlled
› Setback function
(ITM plus Integrator +  iPU
› Sliding temperature
› Ethernet TCPIP
- Chillers (via POL. controller)
› Interlock control
› Smart energy management
System layout
(incl. iTM adaptor)
› Schedule setting (Weekly
- DX Split, Sky Air, VRV
- BACnet protocol
WAGO Interface
› Modular integration of rd
party equipment
- WAGO coupler (interface
between WAGO and Modbus)
- Di module
- Do module
- Ai module
- Ao module
- Thermistor module
- Pi module

CONTROL
SYSTEMS
› German
( groups)
Connectable to
Standard protocol interfaces
Modbus Interface
RTD
RTD-RA
› Modbus interface for monitoring and control
of residential indoor units
RTD-NET
› Modbus interface for monitoring and control
of Sky Air, VRV, VAM and VKM
RTD-10
› Advanced integration into BMS of Sky Air, VRV,
VAM and VKM through either:
- Modbus
- Voltage (-V)
- Resistance
› Duty/standby function for server rooms
RTD-20
› Advanced control of Sky Air, VRV, VAM/VKM
and air curtains
› Clone or independent zone control
› Increased comfort with integration of CO sensor
for fresh air volume control
› Save on runningcosts via
- pre/post and trade mode
- set point limitation
- overall shut down
- PIR sensor for adaptive deadband
RTD-HO
› Modbus interface for monitoring and control of
Sky Air, VRV, VAM and VKM
› Intelligent hotel room controller
RTD-W
› Modbus interface for monitoring and control of
Daikin Altherma Flex Type, VRV HT hydrobox and
small inverter chiller

Integration of RA, Sky Air,
VRV, Daikin Altherma Flex,
small inverter chiller and small
inverter chiller in BMS or home
automation systems
Overview functions
Main functions
RTD-RA
Dimensions
HxWxD
mm
Key card + window contact
Set back function
Prohibit or restrict remote control functions (setpoint limitation, ...)
Modbus (RS)
Group control
 -  V control
Resistance control
IT application
Heating interlock
Output signal (on/defrost, error)
Retail application
Partitioned room control
Air curtain
RTD-NET
RTD-10
80 x 80 x 37,5
3
3
3
3(1)
RTD-20
RTD-HO
100 x100 x 22
3
3
3
3
3
3
3
3
3
3
3
3
3**
3
3
3
3
3
3
3
3****
3
3
3
***
***
3
3
3
3
3
3
(): By combining RTD-RA devices
Control functions
RTD-RA
RTD-NET
RTD-10
RTD-20
RTD-HO
On/Off
Set point
Mode
fan
Louver
HRV Damper control
Prohibit/Restrict functions
Forced thermo off
M,C
M
M
M
M
M
M
M
M
M
M
M
M,V,R
M,V,R
M,V,R
M,V,R
M,V,R
M,V,R
M,V,R
M
M
M
M
M
M
M
M*
M*
M*
M*
M*
M*
RTD-RA
RTD-NET
RTD-10
RTD-20
RTD-HO
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Monitoring functions
On/Off
Set point
Mode
fan
Louver
RC temperature
RC mode
nbr units
Fault
Fault code
Return air temperature (Average /Min/Max)
Filter alarm
Termo on
Defrost
Coil In/Out temperature
M
M
M
M
M
Main functions
Dimensions
On/off prohibition
Modbus RS485
Dry contact control
Output signal (operation error)
Space heating / cooling operation
Domestic hot water control
Smart Grid control
RTD-W
HxWxD
mm
100x100x22
3
3
3
3
3
3
Control functions
On/Off Space heating/cooling
Set point leaving water temperature (heating / cooling)
Room temperature setpoint
Operation mode
Domestic Hot water ON
Domestic Hot Water reheat
Domestic Hot Water reheat setpoint
Domestic Hot Water storage
Domestic Hot Water Booster setpoint
Quiet mode
Weather dependent setpoint enable
Weather dependent curve shift
Fault/pump info relay choice
Control source prohibition
M,C
M,V
M
M
M,C
M
M,C
M
M
M
Smart grid mode control
Prohibit Space heating/cooling
Prohibit DHW
Prohibit Electric heaters
Prohibit All operation
PV available for storage
Powerful boost
Monitoring functions
M,C
M
M
M
M
M
M
M
M
M,C
M
M
M
M
M
M
M
M
M
M
M
M : Modbus / R : Resistance / V : Voltage / C: control
* : only when room is occupied / ** : setpoint limitation / (*) if available
*** : no fan speed control on the CYV air curtain / **** : run & fault

CONTROL
SYSTEMS
On/Off Space heating/cooling
Set point leaving water temperature (H/C)
Room temperature setpoint
Operation mode
Domestic Hot Water reheat
Domestic Hot Water storage
Number of units in the group
Average leaving water temperature
Remocon room temperature
Fault
Fault code
Circulation pump operation
Flow rate
Solar pump operation
Compressor status
Desinfection operation
Setback operation
Defrost/ start up
Hot start
Booster Heater operation
3-Way valve status
Pump running hours accumulated
Compressor running hours accumulated
Actual leaving water temperature
Actual return water temperature
Actual DHW tank temperature (*)
Actual refrigerant temperature
Actual outdoor temperature
Standard protocol interfaces
DIII-net Modbus interface
EKMBDXA
Integrated control system for seamless connection between
Split, Sky Air, VRV and small inverter chillers and BMS systems
›
›
›
›
Communication via Modbus RS protocol
Detailed monitoring and control of the VRV total solution
Easy and fast installation via DIII-net protocol
As the Daikin DIII-net protocol is being used, only one modbus interface is needed per Daikin unit
VRV network
DIII- NET
EKMBDXA
VRV Outdoor unit
Biddle air curtain
*via EKEQ box
HRV
up to  units connectable per interface
Sky Air network*
Split network*
KRPBBS
Small inverter chiller network
Building
control
network
Fire alarm
Security
Power supply facility
Lighting
Pump
* Additional centralized controller might be required. For more information contact your local dealer.
Maximum number of connectable indoor units
Maximum number of connectable outdoor units
Communication
DIII-NET - Remark
Protocol - Remark
Protocol - Type
Protocol - Max. Wiring
length
Dimensions
HeightxWidthxDepth
Weight
Ambient temperature - operation
Max.
Min.
Installation
Power supply
Frequency
Voltage
488
EKMBDXA7V1


DIII-NET (FF)
 wire; communication speed:  bps or  bps
RS (modbus)
m
mm
kg
°C
°C
Hz
V

xx
.


Indoor installation

-
Elevator
Standard protocol interfaces
Modbus interface
Integrate chillers, fan coil units and air handling units in BMS systems via modbus protocol
Serial card RS/Modbus
Serial sequencing panel
EKCMJ
EKCMJ
EKCMJ
EKACJ
EKDSSP-S
D-AHU
Climatix
MODBUS
EKCMJ
MicroTech III
()
FWM-D/FWS-A
FWL-D/FWR-A
MicroTech III
MicroTech III
FWV-D/FWZ-A
FWECA () / FWECA ()
EKFCMBCB
FWC-BT/BF
FWF-BT/BF
Building
control
network
Fire alarm
Security
() The communication module is integrated in the controller
Power supply facility
() Connection to FWV-D, FWL-D & FWM-D
Lighting
Pump
Elevator
() Connection to FWV-D, FWL-D, FWM-D and to FWZ-A, FWR-A, FWS-A
Integrate Refrigeration units in BMS systems via modbus protocol
DIII net
Daikin Modbus
Communication Interface
BRRAV
Monitoring system
rd party equipment
Conveni-pack
ZEAS
Multi-ZEAS
Daikin indoor units and
Biddle air curtains
Booster unit
* For all connectable indoor units and Biddle air curtains please refer to the Conveni-pack pages in this catalogue
489
CONTROL
SYSTEMS
Booster unit
Standard protocol interfaces
KNX interface
KLIC-DD
KLIC-DI
Integration of Split, Sky Air and VRV in HA/BMS systems
Connect split indoor units to KNX interface
for Home Automation system
Concept
light
house
Domotica
shutter control
Controller
Interface Daikin protocol/ KNX
tv
Connect Sky Air / VRV indoor units to
KNX interface for BMS integration
Concept
light
shop
shutter control
Domotica
tv
Controller
Interface Daikin protocol/ KNX
KNX interface line-up
The integration of Daikin indoor units through
the KNX interface allows monitoring and control
of several devices, such as lights and shutters, from
one central controller. One particularly important
feature is the ability to programme a ‘scenario’
- such as “Home leave” - in which the end-user selects
a range of commands to be executed simultaneously
once the scenario is selected. For instance in
“Home leave” , the air conditioner is off, the lights are
turned off, the shutters are closed and the alarm is on.
KNX interface for
KLIC-DD Size 45x45x15mm
Split
Basic control
On/Off
Mode
Temperature
Fan speed levels
Swing
Advanced functionalities
Error management
Scenes
Auto switch off
Temperature limitation
Initial configuration
Master and slave configuration
490
Sky Air
KLIC-DI Size 90x60x35mm
VRV
t
t
t
Auto, heat, dry, fan, cool
Auto, heat, dry, fan, cool
Auto, heat, dry, fan, cool
t
 or  + auto
Stop or movement
t
 or 
Stop or movement
t
 or 
Swing or fixed positions ()
Communication errors, Daikin unit errors
t
t
t
t
t
t
t
t
t
t
t
t
t
t
Standard protocol interfaces
BACnet Interface
DMS502A51 / EKACBACMSTP / EKCMBACIP / EKCMBACMSTP
Integrated control system for seamless connection between VRV,
applied systems, air handling units and BMS systems
BMS
 Interface for BMS system
 Communication via BACnet protocol
(connection via Ethernet)
 Unlimited sitesize
 Easy and fast installation
 PPD data is available
on BMS system (only for VRV)
VRV network
BACNET / ETHERNET
DIII- NET
Local Control
DMSA
VRV Outdoor unit
HRV
up to  units connectable per interface
Remote Control
Applied systems network
Serial Card
BACnet MSTP
EKACBACMSTP
Serial sequencing
panel
EKCMJ
EKCMJ
EKCMJ
EKDSSP-S
Air handling unit network
EKCMBACIP
EKCMBACMSTP
Fire alarm
Security
Pump
Lighting
Power supply facility
Building
Elevator
491
CONTROL
SYSTEMS
control
network
Standard protocol interfaces
LonWorks Interface
DMS504B51 / EKACLONP
Open network integration of VRV and applied systems
monitoring and control functions into LonWorks networks
LON BMS
VRV network
LonTalk
DIII- NET
adapter
ETHERNET (TCP/IP)
 Interface for Lon connection to
LonWorks networks
 Communication via Lon protocol
(twisted pair wire)
 Unlimited sitesize
 Quick and easy installation
DMSB
Local Control
VRV
Outdoor
unit
HRV
up to  units connectable per interface
Remote Control
Applied systems network
Serial card
LON FTT 
LonTalk
adapter
EKACLONP
Serial sequencing
panel
EKDSSP-S
LonTalk
adapter
LonPoint
LonPoint
Security
Fire alarm
Building
control
network
System
492
EKCMJ
EKCMJ
EKCMJ
Daikin Configurator Software
Daikin Configurator Software
EKPCCAB3
Simplified commissioning:
graphical interface to configure, commission
and upload system settings
Simplified commissioning
The Daikin configurator for Daikin Altherma and
VRV is an advanced software solution that allows for
easy system configuration and commissioning:
Simplified
Retrieve initial
commissioning
system settings
493
CONTROL
SYSTEMS
› Less time is required on the roof configuring
the outdoor unit
› Multiple systems at different sites can be managed
in exactly the same way, thus offering simplified
commissioning for key accounts
› Initial settings on the outdoor unit can be easily
retrieved
What is I-Net?
A service based on our global remote
monitoring technology, keeping your system
trouble-free and working with top efficiency.
CLOUD
I-Net
performance monitoring
and analysis
24/7
What does I-Net offer you
I-Net Services
Safeguarding the lifelong optimum operation of
your air conditioning system means getting geared
up to operate the system in a energy efficient way
and reduce unexpected breakdowns and costs to
the absolute minimum. This is where I-Net helps
to improve the effectiveness of your building
management.
i-Net consists of 2 main services: the VRV Cloud and
I-Net performance monitoring and analysis.
I-Net is about ‘being connected’ with Daikin,
the Internet-based link between you, your air
conditioning system and Daikin’s Remote Monitoring
Centre. This allows you to monitor your energy
consumption and Daikin’s expert service engineers to
monitor your entire system’s status non-stop, all year
round. Through predicting malfunctions and offering
technical advice from data analysis, you can maximise
equipment uptime, as well as controlling energy
costs with no sacrifice in comfort levels. By doing this,
i-Net will prevent problems, prolong your system’s
service life while reducing the energy bill.
494
VRV Cloud
The VRV Cloud puts you in the driving seat of your
energy management. The easy-to-use energy data
trending and analytic tools puts you in control and
shows you CO2 footprint reduction opportunities and
energy savings of up to 15%.
Saving starts by measuring. Enhance your company’s
sustainability !
I-Net performance monitoring and analysis
Focus on your core business and hand the HVAC
over to Daikin. Daikin I-Net connects your system
continuously with Daikin. It notifies alarms and
early warnings of system deviations to maximise
system uptime and the comfort of the people in the
building. Service providers have webbased access to
operation data so that they are fully prepared when
they arrive on-site. Specialists run trend analyses.
All of which boosts your system’s reliability by
ensuring that it is running at optimum efficiency.
Data server
Performance supervision
Internet
and analysis
24/7
Prediction analysis
Data trend logging
Information to:
›
›
customers
service company
CLOUD
Controller
Monitor your energy
managment.
Connection with I-Net via
ITM, PCASO, ...
Helps you manage your energy through Daikin
technology.
› Intelligent energy visualization tool that helps you
with your energy management
› / online monitoring by the customer from any
location.
› User friendly visualization of VRV energy
management (kWh)
› Analysis support of waste operation
› Multiple site monitoring
Performance monitoring
Daikin’s unique I-Net Service aims to prevent
the equipment coming to an unexpected stop or
needing emergency repair.
Fast response, better prepared
› If an alarm does occur, the service provider is
immediately alerted and receives all crucial
information.
› Early fault indication (predictions) : operation data
are / checked by I-Net prediction algorithms
to act as early as possible, averting unscheduled
breakdowns.
› Performance Supervision by Daikin experts
enhances a maintenance plan.
› This service aims to enhance the service level, to
respond fast and accurate, to save on unexpected
repair costs and assure the peace of mind.
Repetitive interventions and disturbance of building
tenants and maintenance teams are kept to a
minimum.
Long lifetime systems
› I-Net will maximise the installation’s lifetime, by
assuring the equipment runs in optimal conditions
and avoid unnecessary stress on components.
Analysis
Be connected with Daikin’s experts, this gives you
a clear overview of operability and use of the air
conditioning system.
› Daikin continuously monitors energy, operation
and comfort data. Thanks to periodic analysis of
the data, Daikin can suggest ways of improving
performance.
› if there is a problem, Daikin specialists will analyse
the operation data history to provide remote
support.
495
CONTROL
SYSTEMS
Daikin VRV Cloud
Room sensors
Wireless room temperature sensor
K.RSS
Flexible and easy installation
› Accurate temperature measurement thanks to flexible
placement of the sensor
› No need for wiring
› No need to drill holes
› Ideal for refurbishment
Connection diagram Daikin indoor unit PCB (FXSQ example)
Power supply – X, X
Air sensor – XA, X
Rf Receiver
RF sender
Specifications
Dimensions
Weight
Power supply
Battery life
Battery type
Maximum range
Operation range
Communication
mm
g
m
°C
Type
Frequency
MHz
Wireless room temperature sensor kit (K.RSS)
Wireless room temperature receiver
Wireless room temperature sensor
 x 
ø 


VDC, max.  mA
N/A
N/A
+/-  years
N/A
 Volt Lithium battery

~
RF
.
› Room temperature is sent to the indoor unit every  seconds or if the temperature difference is .°C or larger.
Wired room temperature sensor
KRCS01-1B
KRCS01-4B
› Accurate temperature measurement,
thanks to flexible placement of the sensor
Specifications
Dimensions (HxW)
Weight
Length of branch wiring
496
mm
g
m
 x 


Other integration devices
ADAPTER PCBs
Simple solutions for unique requirements
Concept and benefits
› Low cost option to satisfy simple control
requirements
› Deployed on single or multiple units
(E)KRP1B*
adapter for wiring
KRP2A*/KRP4A*
Wiring adapter for
electrical appendices
KRP58M3
SB.KRP58M51
KRP58M51
Connectable to:
Split
Sky Air
VRV
t Facilitates integration of auxiliary heating apparatus, humidifiers, fans, damper
t Powered by and installed at the indoor unit
y
y
t
t
t
t
t
y
y
Remotely start and stop up to  indoor units ( group) (KRPA* via P P)
Remotely start and stop up to  indoor units ( groups) (KRPA* via F F)
Alarm indication/ fire shut down
Remote temperature setpoint adjustment
Cannot be used in combination with a central controller
t Low noise and demand control option for RZQ/C
y
t Low noise and demand control option for RZQG and RZQSG single phase
t Includes mounting plate EKMKSA
y
t Low noise and demand control option for RZQG and RZQSG  phase
y
DTA104A*
Outdoor Unit External
Control Adapter
t Individual or simultaneous control of VRV system operating mode
t Demand control of individual or multiple systems
t Low noise option for individual or multiple systems
y
DCS302A52
Unification adapter for
computerized control
t
t
t
t
y
Enables unified display (operation/malfunction) and unified control (ON/OFF) from BMS system
Must be used together with Intelligent Touch Controller
Cannot be combined with KRP/*
Can be used for all VRV indoor models
KRP928*
Interface adapter for
DIII-net
t Allows integration of split units to Daikin central controls
y
KRP413*
Wiring adapter normal
open contact / normal
open pulse contact
t
t
t
t
t
y
KRP980*
Adapter for split units
without an S port
t Connect a wired remote control
t Connect to Daikin central controls
t Allow external contact
Switch off auto restart after power failure
Indication of operation mode / error
Remotely start /stop
Remotely change operation mode
Remotely change fan speed
y
Some adapters require an installation box, refer to the option lists for more information
Accessories
EKRORO
t External ON/OFF or forced off
t Example: door or window contact
EKRORO 3
t External ON/OFF or forced off
t F/F contact
t Example: door or window contact
KRC19-26A
t Mechanical cool/heat selector
t Allows switching over an entire system between cooling/heating/fan only
t Connects to the A/B/C terminals of the unit
t Cool/heat selector PCB
t Required to connect KRC-A to a VRV IV outdoor unit

CONTROL
SYSTEMS
BRP2A81
Options - Control systems
Daikin touch control with cloud connection
Daikin touch control with cloud connection
Options for local control
Cloud options
Software
-
-
Zenpad 8” Tablet for local control
Z380C
t
Asus 4G-N12 router
4G-N12
t
Online control - for remote montoring and control
DCC001A51
DCC002A51
-
t
Multi site – for remote monitoring, control and comparison
of multiple sites (needed for each site)
Energy saving – activates automatic energy saving
function
DCC003A51
t
Full – contains packs DCC001/002/003A51
DCC004A51
-
App for tablet – Application to run on Z380C tablet (download from Play
store, Android only)
Commisioning tool
Software update tool
t
t
-
t
t
t
Intelligent Touch Manager
Options & software
iTM plus adapter – Allows connection of an additional 64
indoor units/groups. Up to 7 adapters can be connected
DCM601A52
t
iTM ppd software – Allows distribution of used kWh by
indoor units connected to the iTM
DCM002A51
t
iTM energy navigator – Energy management option
DCM008A51
t
iTM BACnet option – Enables connection of third party
devices to the iTM via the BACnet protocol. (This is not a
gateway and cannot replace DMS502B51)
DCM009A51
t
Standard protocol interfaces
Interface adapter for connection to RA units
Interface adapter for connection to R-407C/R-22 Sky Air units
Interface adapter for connection to R-410A Sky Air units
DIII board
Digital input/output

KRP928A2S
DTA102A52
DTA112B51
DAM411B51
DAM412B51
DMS504B51
DMS502A51
LonWorks Interface
BACnet Interface
t
t
t
t
t
t
t
t
-
Power supply
T1
V1
VE
V3
VM
W1
Y1
=
=
=
=
=
=
=
Conversion table
refrigerant piping
3~, 220V, 50Hz
1~, 220-240V, 50Hz
1~, 220-240V/220V, 50Hz/60Hz*
1~, 230V, 50Hz
1~, 220~240V/220~230V, 50Hz/60Hz
3N~, 400V, 50Hz
3~, 400V, 50Hz
inch
1
/4˝
3
/8˝
1
/2˝
5
/8˝
3
/4˝
7
/8˝
1 1/8˝
1 3/8˝
1 5/8˝
1 3/4˝
2˝
2 1/8˝
2 5/8˝
* For VE power supply only 1~, 220-240V, 50Hz data
is displayed in this catalogue.
mm
6.4 mm
9.5 mm
12.7 mm
15.9 mm
19.1 mm
22.2 mm
28.5 mm
34.9 mm
41.3 mm
44.5 mm
50.8 mm
54 mm
66.7 mm
F-gas regulation
For fully/partially charged equipment: contains fluorinated greenhouse gases. Actual refrigerant charge depends on the final unit
construction, details can be found on the unit labels.
For non pre-charged equipment (Chillers: split chiller (SEHVX/SERHQ), condensing units and condenserless chillers + refrigeration
(LCBKQ-AV1, JEHCCU/JEHSCU and ICU): Its functioning relies on fluorinated greenhouse gases.
Measuring conditions
Air conditioning
1) Nominal cooling capacities are based on:
Indoor temperature
Outdoor temperature
Refrigerant piping length
Level difference
2) Nominal heating capacities are based on:
Indoor temperature
Outdoor temperature
Refrigerant piping length
Level difference
27°CDB/19°CWB
35°CDB
7.5m - 8/5m VRV
0m
20°CDB
7°CDB/6°CWB
7.5m - 8/5m VRV
0m
Applied systems
Cooling only
Heat pump
Water cooled
Cooling only
Heating only
Condenserless chiller
Fan coil units
Cooling
Heating
Evaporator: 12°C/7°C
Evaporator: 12°C/7°C
Condenser: 40°C/45°C
Ambient: 35°CDB
Ambient: 35°C
Ambient: 7°CDB/6°CWB
Evaporator: 12°C/7°C
Condenser: 30°C/35°C
Evaporator: 12°C/7°C
Condenser: 40°C/45°C
Evaporator: 12°C/7°C
Condensing temperature: 45°C / liquid temperature: 40°C
Room temperature: 27°CDB /19°CWB
Water inlet/outlet temperature: 7°C/12°C
Room temperature: 20°C
2 pipe: Water inlet temperature: 50°C (same water flow as in cooling mode)
4 pipe: Water inlet/outlet temperature: 70°C/60°C
The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value,
depending on the distance and acoustic environment (for measuring conditions: please refer to the technical databooks).
The sound power level is an absolute value indicating the “power” which a sound source generates.
For more detailed information please consult our technical databooks.

CONTROL
SYSTEMS
Air cooled
Benefits
We care icons
3
Seasonal efficiency, smart use of energy
Seasonal efficiency gives a more realistic indication on how
efficient air conditioners operate over an entire heating or cooling
season.
Econo mode
This function decreases the power consumption so that other
applicances that need large power consumption can be used.
This function is also energy saving.
Auto-cleaning filter
The filter automatically cleans itself once per day. Simplicity of
upkeep means optimum energy efficiency and maximum comfort
without the need for expensive or time-consuming maintenance.
Movement sensor
The sensor detects whether someone is in the room. When
the room is empty, the unit switches to economy mode after
20 minutes and restarts when a person enters the room.
Inverter technology
In combination with inverter controlled outdoor units
Home leave operation
During absence, the indoor temperature can be maintained at
a certain level.
2 area intelligent eye
Air flow is sent to a zone other than where the person is located
at that moment. Detection is done in 2 directions: left and right. If
no people are detected, the unit will automatically switch over to
the energy-efficient setting.
3 area intelligent eye
Air flow is sent to a zone other than where the person is located
at that moment. Detection is done in 3 directions : left, front and
right. If no people are detected, the unit will automatically switch
over to the energy-efficient setting and eventually switch off.
Energy saving during operation standby
Current consumption is reduced by about 80 % when operating
on standby.
Fan only
The air conditioner can be used as fan, blowing air without
cooling or heating.
Free cooling
By exploiting the low external air temperatures to cool the water,
free cooling reduces the load on the compressors and decreases
considerably the annual operating costs during the cold season.
Floor & presence sensor
The presence sensor directs the air away from any person
detected in the room, when the air flow control is on. The floor
sensor detects the average floor temperature and ensures an even
temperature distribution between ceiling and floor.
Night set mode
Saves energy, by preventing overcooling or overheating during
night time.
Comfort
Comfort mode
The unit automatically changes the angle of the air discharge louvre
depending on the mode. In cooling operation the air will be directed
rather upwards to avoid cold draught, while in heating operation the
air will be directed rather downwards to avoid cold feet.
Draught prevention
When starting to warm up or when the thermostat is off, the air
discharge direction is set horizontally and the fan to low speed, to
prevent draught. After warming up, air discharge and fan speed
are set as desired.
Powerful mode
If the temperature in the room is too high/low, it can be cooled
down/heated quickly by selecting the ‘powerful mode’. After the
powerful mode is turned off, the unit returns to the preset mode.
Auto cooling-heating changeover
Automatically selects cooling or heating mode to achieve
the set temperature (heat pump types only).
Whisper quiet
Daikin units are whisper quiet. (with sound levels as low as 19dBA)
Indoor unit silent operation
To ensure a quiet environment for studying or sleeping the user
can lower the operation sound of the indoor unit by 3 dB(A) via
remote control.
Outdoor unit silent operation
To ensure a quiet environment for the neighbourhood the user
can lower the operation sound of the outdoor unit by 3 dB(A) via
remote control.
Night quiet mode (cooling only)
Lowers the operation sound of the outdoor unit automatically
at night.
Installer has to make special setting on outdoor unit or wired
remote controller, depending on model.
Comfortable sleeping mode
Increased comfort function that follows a specific temperature
fluctuation rhythm.
Radiant heat
The front panel of the indoor unit radiates additional heat to add
to your comfort on cold days
Integrated cooling
Remove in a reliable, efficient and flexible way the heat constantly
generated by the IT and server equipment to ensure maximum
uptime while offering the best return on investment.
Air flow
Ceiling soiling prevention
A special function prevents air blowing out too long in horizontal
position, to prevent ceiling stains.
3-D Air flow
This function combines Vertical and Horizontal auto-swing to
circulate a stream of cool/warm air right to the corners of even
large spaces.
Vertical auto swing
Possibility to select automatic vertical moving of the air discharge
louvre, for uniform air flow and temperature distribution.
Horizontal auto swing
Possibility to select automatic horizontal moving of the air
discharge louvre, for uniform air flow and temperature distribution.
Auto fan speed
Automatically selects the necessary fan speed to reach or maintain
the set temperature.
Fan speed steps
Allows to select up to the given number of fan speed.
Individual flap control
Flexible installation thanks to the possibility of easily closing
one flap via the wired remote controller, to suit any new room
configuration. Optional closure kits are available as well.
Benefits
Humidity control
Ururu - humidification
Moisture is absorbed from the outdoor air and evenly distributed
throughout the indoor areas.
Sarara - dehumidification
Reduces indoor humidity, without affecting the room
temperature, by mixing cool, dry air with warm air.
Dry programme
Allows humidity levels to be reduced without variations in room
temperature.
Air treatment
Flash streamer
The Flash Streamer generates high-speed electrons that
powerfully break down odours and formaldehyde .
Titanium photocatalytic air purification filter
Removes airborne dust particles, and decomposes the odours of
for example tobacco and pets. It also decomposes harmful organic
chemical substances such as bacteria, viruses and allergens.
Photocatalytic deodorising filter
Removes airborne dust particles, decomposes odours and
restrains the reproduction of bacteria, viruses and microbes, this to
ensure a steady supply of clean air.
Air filter
Removes airborne dust particles to ensure a steady supply
of clean air.
Remote control & timer
Weekly timer
Timer can be set to start operation anytime on a daily or weekly
basis
24 Hour timer
Timer can be set to start cooling/heating anytime during
a 24-hour period.
Timer
Allows to preset the air conditioner to start/stop at a specified
time.
Infrared remote control
Infrared remote control with LCD to start, stop and regulate
your indoor unit from a distance.
Wired remote control
Wired remote control to start, stop and regulate the air
conditioner from a distance.
Centralised control
Centralised control to start, stop and regulate several
indoor units from one central point.
Online controller via app
Control your indoor unit from any location via app.
(optional WLAN adapter)
Other functions
Auto-restart
The unit restarts automatically at the original settings after power
failure.
Self-diagnosis
Simplifies maintenance by indicating system faults or
operating anomalies.
Twin/triple/double twin application
2, 3 or 4 indoor units can be connected to only 1 outdoor unit
even if they have different capacities. All indoor units operate
within the same mode (cooling or heating) from one remote
control.
Multi model application
Up to 5 indoor units (even different capacities) can be connected
to a single outdoor unit. All indoor units can individually be
operated within the same mode.
VRV for residential application
Up to 9 indoor units (even different capacities and up to 71 class)
can be connected to a single outdoor unit. All indoor units can
individually be operated within the same mode.
Drain pump kit
Facilitates condensation draining from the indoor unit.
Multi tenant
The indoor unit’s main power supply can be turned off when
leaving the hotel or office building.
Swing compressor
Swing type compressors have a unified vane and roller with
fewer moving parts producing low vibration and friction, achieve
higher reliability and efficiency compared to conventionally rotary
compressors.
Scroll compressor
Scroll compressors consist of two scrolls, one is fixed while the
other orbits eccentrically without rotating. Designed for small
and medium capacities, they provide constant reliability and high
efficiency throughout its service life.
Screw compressor
Single screw compressors consist of a main single screw and
two gate rotors. Optimal performance through step less capacity
control, they are designed for high capacities and optimal
performances.
Centrifugal compressor
Centrifugal compressors use an impeller and volute section to
convert the velocity energy into pressure energy. Centrifugal
compressors are designed with either optional variable speed
drives (VFD) for superior part-load performance for single or dual
compressor units, or with magnetic bearings and totally oil-free
operation.
Reciprocating compressor
The reciprocating type compressor consists of a cylinder, pistons
and valves. The compression is accomplished by reciprocating
movements of the piston in the cylinder.
Guaranteed operation down to -20°C
Daikin heat pumps are suitable for all climates, even withstanding
severe winter conditions with an operation range down to -20°C
Guaranteed operation down to -25°C
Daikin heat pumps are suitable for all climates, even withstanding
severe winter conditions with an operation range down to -25°C
New business portal
Easy search / Personalised / Mobile
Easy to do business with
We are setting new standards in customer support. With the introduction
of our cutting-edge business portal, our solutions are just a click away.
Our new business portal is built around your needs, enabling you to find
information quickly and easily. Our aim is that you find the information
you need in seconds.
To make life even easier for you, our portal is accessible no matter
where you are, via desktop, tablet and smartphone.
Discover and enjoy using our business portal at my.daikin.eu
my.daikin.eu
Daikin Europe N.V.
Naamloze Vennootschap Zandvoordestraat 300 · 8400 Oostende · Belgium · www.daikin.eu · BE 0412 120 336 · RPR Oostende (Responsible Editor)
Daikin Europe N.V. participates in the Eurovent Certification
programme for Liquid Chilling Packages (LCP), Air handling
units (AHU), Fan coil units (FCU) and variable refrigerant flow
systems (VRF) Check ongoing validity of certificate online:
www.eurovent-certification.com or using: www.certiflash.com
ECPEN16 -500
CD · 10/16
The present publication is drawn up by way of information only and does not constitute an offer binding upon
Daikin Europe N.V. Daikin Europe N.V. has compiled the content of this publication to the best of its knowledge. No
express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its
content and the products and services presented therein. Specifications are subject to change without prior notice.
Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from
or related to the use and/or interpretation of this publication. All content is copyrighted by Daikin Europe N.V.
The present publication supersedes ECPEN15-500_P. Printed on non-chlorinated paper.