GLIDEG9R
T5, T5HO and T8
Direct/ Indirect luminaire Perforated
Project Name
Date
Catalog Number
Type
CONSTRUCTION One piece die-formed steel housing in a 8-3/4” by 2-1/2” profile. Standard 4’-0”, 8’-0” and 12’-0”
fixtures can be joined to create continuous runs.
REFLECTOR Standard high reflectance die-formed white painted aluminum. Optional specular reflector.
ENDCAPS Precision die-cast sculpted endcaps are fastened with concealed hardware.
PERFORATED PANELS Panels measure 2.5” by 43” every 4 feet. Diameter is .094 on 60 degree stagger with .1875”
hole centers. Opal diffuser included.
ELECTRICAL T5, T5HO: Program start 120/277 volt integral electronic ballast with less than 10% THD. T8: Instant
start 120/277 volt electronic ballast with less than 10% THD. Through wiring with quick connects standard. Standard
single circuit. Each ballast provided with disconnects to meet luminaire disconnect code requirement.
MOUNTING Adjustable aircraft cable mounts on 4’-0”, 8’-0” and 12’-0” centers. Aircraft Cable supplied with 5”
power and 2” non-power canopies. Refer to installation instructions for appropriate ceiling detail. Canopies and power
cords are painted white unless otherwise specified.
FINISH Standard powder-coat white painted finish. Consult factory for custom color and finish options.
LABELS UL and cUL Listed and approved for dry/damp location.
STANDARD LIGHT DISTRIBUTION
Direct 5%; Indirect 95%
T5 Cross Section
T8 Cross Section
2-1/2"
2-1/2"
8-3/4"
8-3/4"
Lamp Options
YEAR
WARRANTY
1T5, 1T8
LFL
Convertible
L U M I N A I R E S P E C I F I C AT I O N
LED
2T5, 2T8
LED
Lamp Options
LFL
_T___-
___’-
______-
___-
HOUSING
LAMPS
LENGTH
MOUNTING
VOLTAGE
1T8
Sample Catalog #: G9R-1T5HO-32’-AC48G1-120-1C-W
__-2T8
CIRCUITING
Convertible
Adjustable Aircraft Cable1,2
AC48G1- 1” T-Bar
AC48G9- 9/16” T-Bar
AC48GS- Slotted T-Bar
AC48JB- Junction Box
AC48ST- Structure
AC548G_- 5” Non-Power Canopy3
5” Non-Power Canopy3
AC548JBLED
Convertible
5” Square Canopy3
SQ48G_LFL
SQ48JB- 5” Square Canopy3
__-
120277347UNV-
120 V
277 V
347 V4
UNV4
LED
LED
4T8
___
YEAR 3T8
WARRANTY
YEAR
WARRANTY
LFL
1T5- (1) 28W T5
2T5- (2) 28W T5
3T5- (3) 28W T5
4T5- (4) 28W T5
YEAR
1T5HO- (1) 54W T5HO
WARRANTY
2T5HO- (2) 54W T5HO
3T5HO- (3) 54W T5HO
LFL
4T5HO- (4) 54W T5HO
Convertible
LED
1T8- (1) 32W T8
2T8- (2) 32W T8
3T8- (3) 32W T8 Individual Units
4- 4’
4T8- (4) 32W T8
8- 8’
12- 12’
Continuous Runs
xx’- Specify nominal
overall row
length in 4’
increments
4T5, 4T8
Convertible
G9R-
G9R-Glide
Direct/Indirect
indoor luminaire
with perforated
panel
3T5, 3T8
FINISH
LFL
Convertible
Convertible
LFL
LED
W- Matte White
CC- Custom Color
OPTIONS
LED
Convertible
LFL
(120/277)
1C- Single Circuit
2C- Dual Circuit5,6
1D- Single Circuit
Dimming5
2D- Dual Circuit
Dimming5,6
1E- Single Circuit with
Emergency Circuit5
2E- Dual Circuit with
Emergency Circuit5,6
1B- Single Circuit with
Battery Pack5
2B- Dual Circuit with
Battery Pack5,6
DSM- Daylight Sensor Master
(sensor included)7
DSS- Daylight Sensor Satellite (sensor not included)7
MS- Motion Sensor
DG- Dust Guard
(Covers top of luminaire)
SR- Specular Reflector
8
QS- Quick Ship
Low
Ceiling
Reflector
LCR(1, 2 lamp T5, T5HO)
CL- 90 Degree Corner
CX- X Connector
CT- T Connector
1Standard 48” Adjustable Cable. Consult factory for additional lengths. 2Consult factory for tegular edged tiles. 3Replaces standard 2” non-power canopy. Square canopy replaces standard round. Must
specify grid ceiling type on AC548G_ and SQ48G_. Select from G1 (1” grid), G9 (9/16” grid), or GS (slotted); for example AC548G1. 4347 volt and UNV not available with battery packs. 5Some Glide
configurations will not accommodate all electrical options. Consult factory. 62 lamps switched side-by-side, 3 and 4 lamps switched inboard/outboard. 7See back page for ordering information. Requires
0-10 volt dimming. 8Includes Universal voltage, standard white, single (1C) and dual circuit (2C).
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570 Fax 303.322.5568
www.pinnacle-ltg.com
© 2012 Pinnacle Architectural Lighting® April 2012
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRICS
3.0"
1
1502 48.0"
4'
1126
1.60"
375
96.0"1
12.0"
1Endcaps
2202
3296
2472
3394
to the overall length of the row.
1101
1648
2263
551
824
1131
1652
Must add 3” for each endcap or 6”
751
10.40"
G L I D E G 91.60"
R / T 5 , T 5 H O ,1.60"
T8
12.0"
4525
8'
CL = 90 Degree Corner
Test # 202742
Part #: G9R-1T5HO-4-SR
Total Luminaire Efficiency: 87.2%
Direct: 5%; Indirect: 95%
Test # 202748
Part #: G9R-2T5HO-4-SR
Total Luminaire Efficiency: 85%
Direct: 5%; Indirect: 95%
INDIVIDUAL LUMINAIRES
Test # 202753
Part #: G9R-3T5HO-4-SR
Total Luminaire Efficiency: 83.3%
Direct: 5%; Indirect: 95%
Test # 202757
Part #: G9R-4T5HO-4-SR
Total Luminaire Efficiency: 81.4%
Direct: 5%; Indirect: 95%
1.60"
1Endcaps
Must add 3” for each endcap or 6”
to the overall length of the row.
4'
CX = X Connector
CORNERS
3.0"
48.0"1
CT = T Connector
10.40"
1.60"
1.60"
12.0"
12.0"
96.0"1
8'
144.0"1
12'
CL = 90 Degree Corner
CT = T Connector
CX = X Connector
LOW CEILING REFLECTOR
APPLICATION: Glide’s low ceiling
reflector eliminates hot spots while
increasing uniformity across the
1
ceiling. Utilize when48.0"
fixtures
must
be installed as close as 10” from the
ceiling. Available on 1 and 2 lamp
4'
T5, T5HO fixtures only.
3.0"
1Endcaps
1.60"
Must add 3” for each endcap or 6”
to the overall length of the row.
10.40"
1.60"
12.0"
1.60"
12.0"
1 painted aluminum. Low Ceiling Reflector
96.0"
CONSTRUCTION: Highly reflective
white
securely snaps onto top of the lamp.
8'
ORDERING INFORMATION: Specify “LCR” in the options section of the part
number. (Sample Catalog #: G9R-1T5-32’AC48G1-120-1C-W-LCR)
DAYLIGHT SENSOR
Glide Side Baffle shown
APPLICATION: Daylight sensors
are an ideal solution for saving
energy , creating smart environments
and aiding sustainability. Pinnacle LightIndicates sensor location
Example 1
ing’s daylight sensor is a turn key solution
4DSM
4’
for lighting control. The sensor is easily wired
4’ individual fixture with a Daylight Sensor.
to Specify:
the 0-10G9B-2T5-4’-AC48G1-120-1C-W-4DSM
volt dimming ballast installed in the
Example 2
fixture.
location
DAYLIGHT
SENSOR: Daylight sensor Indicates
dims lightssensor
based on
electric light and
8DSS
8’
4’fixture wired
presence
of daylight.
control
up to 20 dimming ballasts. Sensor
8’ individual
to a DSMSensor
fixture. can
Specify:
G9B-2T5-8’-AC48G1-120-1C-W-8DSS
Example 3 is8’factory calibrated to 45 footcandles (fc), adjustable by 1/3 to 3 times the
default setting
by rotating the aperture. 8DSS
8DSM
16’
SENSOR
8’ fixture STANDARD
with
a
Daylight
Sensor
andPLACEMENT:
8’ fixture wired to The
DSMsensor
fixture location in Glide fixtures
12’
for easy placement of the sensor in relation to the space being daySpecify: allows
G9B-2T5-16’-AC48G1-120-1C-W-8DSM+8DSS
lighted. Housings can be rotated for more flexibility.
CL = 90 Degree Corner
CT = T Connector
CX = X Connector
ORDERING INFORMATION: Specify row layout in the Options section of the part
number when ordering Remote Daylight Sensor. Remote Daylight Sensor Master (DSM)
includes the fixture with remote sensor and dimming ballast. Controls DSS units. Remote
Daylight Sensor Satellite (DSS) includes the fixture with a sensor compatible dimming ballast only. Must be used in conjunction with a DSM unit. See example 4 and 5 for information on ordering rows with both standard circuiting and daylight sensor.
Indicates sensor location
Example 1
4DSM
4’
4’ individual fixture with a Daylight Sensor. Specify: G9R-2T5-4’-AC48G1-120-1C-W-4DSM
Example 2
8DSS
8’
8’ individual fixture wired to a DSM fixture. Specify: G9R-2T5-8’-AC48G1-120-1C-W-8DSS
Example 3
8DSS
8DSM
16’
8’ fixture with a Daylight Sensor and 8’ fixture wired to DSM fixture
Specify: G9R-2T5-16’-AC48G1-120-1C-W-8DSM+8DSS
Example 4
82C
8DSM
16’
Indicates
sensor location
4’
8’ fixture with a Daylight Sensor + 8’ fixture wired as standard dual circuit (not wired to the sensor)
Specify: G9B-2T5-16’-AC48G1-120-2C-W-8DSM+82C
Example 4
82C
8DSM
16’
8’ fixture with a Daylight Sensor + 8’ fixture wired as standard dual circuit (not wired to the sensor)
Specify: G9R-2T5-16’-AC48G1-120-2C-W-8DSM+82C
Example 5
81C
12DSM
20’
12’
12’ fixture with a Daylight Sensor + 8’ fixture wired as standard single circuit (not wired to the sensor)
Specify: G9B-2T5-20’-AC48G1-120-1C-W-12DSM+81C
Example 5
81C
12DSM
20’
12’ fixture with a Daylight Sensor + 8’ fixture wired as standard single circuit (not wired to the sensor)
Specify: G9R-2T5-20’-AC48G1-120-1C-W-12DSM+81C
8’
Indicates sensor location
4’
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO
80239 Phone 303.322.5570 Fax 303.322.5568
www.pinnacle-ltg.com
Example 1
Indicates sensor location
8’
© 2012 Pinnacle Architectural Lighting® April 2012
4DSM
4’
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
4’ individual fixture with a Daylight Sensor. Specify: G9W-2T5-4’-AC48G1-120-1C-W-4DSM
®
Example 2
12’