FINANCIAL BID
Bill of Quantities (BOQ) for Supply, Erection, Installation and Commissioning of dismountable
Portable Cabins at the backside lawn of C-DAC, Kolkata's Main Building (please refer layout
drawings attached and Rates should also be written in words).
Sl. No.
Qty.
Unit
1.1
Columns of the structure will be made of 100mm X 100mm 85.0
MS Square hollow pipe of make TATA / Bhushan or as
approved brand and quality, as per approved sample and
as per drawing attached. All columns shall be inserted into
the ground up to a depth of min 1000mm with 300 X 300 X
8 mm square MS Plate welded at the bottom as support on
ground and fixed with 1500mm length horizontal 50 X 50
mm MS painted hollow square tube recker at ground level
as per drawing and as approved.
RMt
1.2
Main Base (bottom) Outer frame structure will be made of
100mm X 100mm hollow square pipes of make TATA /
Bhushan or as approved brand and quality with running
weilding.
200.0
SqM
1.3
Main Base (bottom) frame Grid structure inside Outer
frame structure will be made of 50mm X 50mm hollow
square pipes of make TATA/ Bhushan or as approved
brand and quality. The frame grid will be 1200mm X
1200mm cc approx.
200.0
SqM
1.4
Inner frame structure including roof will be made of 25mm 475.0
X 25mm hollow square pipes of make TATA / Bhushan or
as approved brand and quality with necessary truss, fascia
and headers as approved.
SqM
2.0
Supply, erection and installation of Outer Walls:
2.1
Outer wall cladding of the structure will be made of 1.2 mm 210.0
MS Corrugated Sheet fixed on outer frame structure made
of 50mm X 50mm hollow square pipes - all made of TATA
or Bhushan or as approved brand and quality with two
coats of Red Oxide primer and 2 coats of synthetic enamel
paint at inner surfaces after surface preparation as
approved.
3.0
Supply, erection and installation of Inner walls:
3.1
Inner walls shall be made of 6.0 mm MDF pre-laminated
water proof board with approved brand and quality and
with approved shades and colour. In between walls laying
of 50 mm thick Glasswool as insulation and as approved.
Provisions for fitting switch boards and split ACs on walls
with conduit wiring should be made as directed and
approved.
1.0
Description
Supply, erection and installation of Structural Work:
The structure and roof shades etc. shall be strictly water
proof and capable to survive wind speed of 100 km/h. All
gaps shall be sealed at edges, seams, bottom sills etc. to
prevent ingress of insects, moisture etc. Entire metal
structure, pipes and its parts shall be painted with two
coats of Red Oxide primer and two coats of synthetic
enamel paint after surface preparation as approved.
Page 1 of 3
290.0
SqM
SqM
Rate
(in Rs.)
Amount
(in Rs.)
Sl. No.
Description
Qty.
Unit
210.0
SqM
4.0
Supply and installation of Roof Ceiling:
4.1
The roof of the structure will be made of 1.2 mm thick MS
Corrogated sheets fitted in dual slope as per drawing with
two coats of Red Oxide primer and two coats of synthetic
enamel paint at inner surfaces and is provided with
adequately pressed reinforced sections from inside for
additional strength with gutters and 75mm dia rain down
pipes at the back of structure as approved. Roof Ceiling
shall be made of 6.0 mm MDF pre-laminated water proof
board with approved brand and quality and with approved
shades and colour. Above the roof ceiling laying of 50 mm
thick Glasswool as insulation and as approved. Provisions
for hanging Tube Light Shades and Ceiling Fans from
Ceiling with conduit wiring should be made as approved.
5.0
Supply and construction of Flooring:
5.1
Flooring of Recreation Room and Store Space is made of
18 mm thk cement ply of make Everset/Byson or as
approved brand and quality with approved colour. On top
of the cement ply supply, pasting, installation and finishing
of 1.6mm thk Vinyl sheet of approved shade, brand and
quality.
95.0
SqM
5.2
105.0
Flooring of Food Coart Space is made of 18 mm thk
cement ply of make Everset/Byson or as approved brand
and quality with approved colour. On top of the cement ply
providing and laying of 600mm x 600mm Ceremic floor tiles
of approved brand and shade in Food Court Area and Stair
steps and rises in line and level free of flaws over tile fixing
adhesive after necessary chipping / scrapping on floors,
including colour cement float joints in matching shade all
complete finishing as per approval.
SqM
6.0
Supply, fitting and installation of Doors:
6.1
Doors of size: 1200mm (W) X 2100mm (H) insulated with
ply and glasswool in MS sheet and MS Frame all duly
painted with door closer, locking arrangement and door
handle etc. with min 600mm cantilever rain guard as per
drawing and as approved.
Supply, fitting and installation of Windows:
5.0
No.
7.1
Sliding Windows of size 1200 (H) X 1500 (W) made of high 16.0
quality aluminum anodized extruded sections with 5 mm
clear float Glass and min 600mm cantilever Rain Guard as
per drawing and as approved.
No.
7.2
Safety ornamental Grills for windows of approved design
joints continuously welded made of M.S. bars of section
10mm X 10mm with 100mm X 100mm cc grid fitted and
fixed with necessary screws and lugs with duly painted
after surface finish as approved.
30.0
SqM
8.0
Supply and Painting of entire Structure:
8.1
Entire external surfaces of outer walls of the structure shall 470.0
be painted with two coats of high gloos Paint of Make:
Berger/Asian/ICI/equivalent brand and quality in approved
colour and shade over two coats of Red Oxide primer or as
applicable after cleaning the surfaces properly in
intermediate coats etc. as approved.
SqM
7.0
Page 2 of 3
Rate
(in Rs.)
Amount
(in Rs.)
Sl. No.
Description
Qty.
Unit
9.0
Supply, erection and installation of Extra Shed:
9.1
The extra roof shed will be made of 1.2 mm thick MS
50.0
Corrogated sheets fitted in single slope matching and in
line with new structure with 25mm hollow square MS frame
structure with two coats of Red Oxide primer painted at
inner surfaces and all frame structure and is provided with
adequately pressed reinforced sections from inside for
additional strength with gutters and 75mm dia rain down
pipes at suitable position as approved. Extra Roof Shed
Ceiling shall be made of 6.0 mm MDF pre-laminated water
proof board with approved brand and quality and with
approved shades and colour.
SqM
10.0
Supply, fitting and testing of Electrical Items:
10.1
Double Tube Light Fittings with two 36W floroscent tubes
of size 1200 mm length with white glare with high
frequency electronic ballast. Frame is made of CRCA
sheet steel, powder coated grey with CRCA cover, powder
coated white with Vitreous enamelled reflector along with
channel. Make: Philips or equivalent brand and quality as
approved. Cost of this item includes supply, installation,
connections and testing complete.
26.0
Set
10.2
1200 mm Sweep Ceiling Fan of make, Crompton/Bajaj/
Havells or as approved brand and quality with electronic
regulator including installation, connection, testing
complete.
16.0
Set
10.3
External Wallket with 36W CFL Lamp secured inside
wallket frame, as per approved sample with necessary
screw fitting including installation, connection, testing
complete.
14.0
Set
10.4
Electrical Concealed wiring with FRLS Cu flexible wires of
approved brand, size and quality for 2TR Split Air
Conditioners (6 nos), lights, Wallkets, fans with Switch
Board (12 nos.) and Main switch Board (1 No.) with
required MCBs as approved and modular 16/6A, 250V
Switches and Sockets with face plates of make Legrands
or as approved brand and quality for the entire structure.
L.S.
L.S.
Rate
(in Rs.)
Total:
Total amount in words:
Signature of the Tenderer:
Date:
Name of the Tenderer:
Tenderer's Office Seal
Designation:
Organization:
Page 3 of 3
Amount
(in Rs.)