Course Prospectus 2016 1 Our Aim Our aim is dedicated to assisting installers and service technicians working in the energy field, in achieving the highest possible standards through a theoretical and practical approach to training using the most up to-date equipment and technology available. Company Overview METAC Training is the largest energy training and assessment centre in Ireland and the UK and trains approximately 1,700 people annually. Our realistic training facilities equip people with practical skills for the modern workforce that are nationally recognised by QQI, Blueflame, City & Guilds, UKAS, Bord Gais and OFTEC amongst others. All courses we run are independently certified and verified by external agencies. All the administration and management of our certified courses is managed directly by our administration personnel. The company was established in 2006 by Dominic Dunne, an installer himself by trade, who saw a gap in the market for a training facility which would permit a high degree of live and simulated training which effectively reflects an authentic work environment. METAC Training is renowned in the energy industry for our specialist training in Renewable Energy, Gas and Oil as well as Sustainable Systems such as Rainwater Harvesting. Our trainers all work in the industries both nationally and internationally in which they train which ensures they are up-to-date with the latest technologies and issues that participants may face on a daily basis. They continually revise and update their skills to ensure they impart the latest knowledge to participants. Facilities Our centre based in Mountrath, Co. Laois is equipped with 13 theory rooms, 11 practical rooms, 2 canteens and onsite parking. We offer all our course participants free lunch as well as free tea/coffee. The centre is fully insured for the training of individuals/organisations and built to comply with all fire and safety regulations. One of our Theory Rooms… One of our Practical Rooms… Booking Procedure To reserve a place on a METAC Training course please call or email us on: Tel: Email: 057-8756540 info@metac.ie A non-refundable booking fee is required to reserve a course place with the outstanding balance payable in full prior to registration. In the event of a participant needing to cancel their booking, a request must be received no later than 7 days prior to the commencement date of the course booked. Requests received less than 7 days will not be facilitated, as METAC Training will not have sufficient time to fill the vacated place. Please note that METAC Training reserves the right to change the date of a course scheduled or to cancel a course due to insufficient numbers. Should this occur, all candidates who have paid any monies will be refunded in full. Please note that all dates may be subject to change. We reserve the right to alter any price or special offer at any time. 2 Table of Contents Courses Page Domestic Gas Safety (DGS) 4 Gas Installer Pre. Reassessment Training 5 GDA (Gas Domestic Assessment) 6 Domestic Servicing Course (GI3) 7 Domestic Gas Fault Finding & Repair 8 Commercial Gas Safety (CGS) 9 Gas Cylinder Safety 10 OFTEC (50, 101, 105e & 600a) 11 OFTEC 5 Day Refresher 12 OFTEC 3 Day Re-assessment 13 OFTEC 201 Commercial 14 Domestic Oil Fault Finding & Repair 15 Oil Tanker Drivers Course 16 Solid Fuel Awareness training 17 Dry Solid Fuel Stove Installer 18 Wet Stove Solid Fuel Installer 19 Electrical Verification & Certification 20 Electrical Safety (Minor Works) 21 Rainwater Harvesting 22 Passive House Building Envelope Specialist 23 Passive House Designer 24 Air & Wind Tightness and Insulation 25 Air Pressure Testing 26 Solar Domestic Hot Water Maintenance 27 Micro Solar Photovoltaic Systems Implementation (PV) 28 Implementation of Small Scale Wind Systems 29 Micro-Generator Electrical Installations 30 Electrofusion 31 Unvented Cylinders 32 Power Flushing 33 Flue Gas Analysers 34 Mechanical Ventilation Heat Recovery Installer Course 35 Additional Courses Are Available 3 DOMESTIC GAS SAFETY (DGS) AIM: The aim of this course is to provide participants with the skills and related knowledge to enable them to work safely with domestic gas installations. On completion of this course candidates will have the acquired knowledge and skills to enable them to install and admit gas safely to domestic gas installations having passed their assessments and end of course tests. OBJECTIVES: The programme will provide an extensive insight into Gas installer safety for domestic installations and will prepare candidates for the end of programme theory and practical assessments leading to qualification to register with RGII as a Registered Gas Installer (RGII). CONTENT: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Module 8 Module 9 Module 10 Module 11 Safety Standards Combustion Flues & Venilation Installations Pressure & Flow Gas Appliances Electrical and Electrical Control Gas Meter Installation and Isolation Combustion Analysers, Flame Protection Devices and Combustion Safety Customer Relations and Commissioning Installations End of Unit Written and Practical Assessments TRAINEE PROFILE: Candidates must hold a FETAC level 6 Advanced CraftCertificate or Equivlent in plumbing, Pipe fitting, refrigeration, or electrical DURATION: 16 Days (2 days per week for 8 weeks) COURSE FEE: €1950p.p CERTIFICATION: QQI Level 6 Please note: Application forms with all details including payment must be completed before training/assessment commences. Three recent photographs(passport style and size in colour) must be submitted with each application. 4 GAS INSTALLER PRE. REASSESSMENT TRAINING AIM: The aim of this course is to provide registered participants currently working in the gas industry an opportunity to upgrade their skills and knowledge to ensure that they are up to date with current procedures prior to applying for reassessment. OBJECTIVES: This programme will allow participants: To prepare for re - assessment Keep abreast of changes in the gas industry Provide greater customer satisfaction Maintain good practice CONTENT: Gas Regulations Basic Principles High Efficiency Boilers Soundness & Let By Testing Gas Rating High Efficiency Boilers Use of Combustion Flue Gas Analysers Leak Testing Commissioning Carbon Monoxide Leisure Accommodation Vehicles LPG Installations Electrical Safe Isolation TRAINEE PROFILE: RGII Registered DURATIONS: 1 Day, 3 Days or 5 Days COURSE FEE: €200, €480 or €620 p.p. CERTIFICATION: Certificate of Completion 5 GAS DOMESTIC ASSESSMENT (GDA) AIM: The aim of this assessment is to maintain the 5 year cycle of gas certification. Gas registered operatives are required to update their qualifications by part-taking in gas re-assessment. OBJECTIVES: To improve the knowledge and competences of registered gas installers and to enable the industry to maintain high standards of practice and above all safety. CONTENT: Theory Assessments Practical Assessments TRAINEE PROFILE: Applicants must produce current RGII Card & Registration Number LOCATION: METAC Training DURATION: 2 Days COURSE FEE: €430p.p. CERTIFICATION: Blueflame Certified Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 6 DOMESTIC SERVICING GAS (GI3) AIM: The aim of this course is to provide participants with the skills and related knowledge to enable them to diagnose faults, service & repair a range of cookers, fires, and central heating boilers to manufacturer’s specifications and to comply with current regulations and codes of practice and to achieve certification. OBJECTIVES: The programme will provide an extensive insight into Gas Appliance & Boiler Servicing, Fault Finding, Repairs and Maintenance and will prepare candidates for the end of programme Theory and Practical Assessments leading to Certification on Domestic Gas Servicing Appliances. CONTENT: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Module 8 Module 9 Review of Flueing, Ventilation and Soundness Testing Fault Finding Techniques & Testing Gas Cookers Gas Fires Central Heating Boilers Combination Boilers Condensing Boilers Legal aspects and Documentation of Service Work Practical Training Workshops Product Identification, Product Types, Fault Identification, Product Repair, Product Maintenance, System Applications as well as Practical Training on all the types of equipment TRAINEE PROFILE: Applicants must hold a GID or a GI 2 Certificate LOCATION: METAC Training DURATION: 10 Days (2 days per week for 5 Weeks - Fri/Sat) COURSE FEE: €1,800p.p. CERTIFICATION: Blueflame Certified Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 7 DOMESTIC GAS FAULT FINDING & REPAIR AIM: To enhance and upgrade the skills of gas service engineers on fault finding and the repair of gas boilers. OBJECTIVES: On completion of this course, participants will have improved their knowledge and skills in terms of gas fault finding. They will also be more aware of up-to-date appliance testing and be better able to repair gas boilers more efficiently. CONTENT: Basic systems of ignition for condensing and non-condensing boilers Boiler component testing Fault logic and diagnostics Test procedures including combustion flue gas analysis Appliance testing TRAINEE PROFILE: People working in the gas industry who would like to refresh their skills LOCATION: METAC Training DURATION: 1 Day COURSE FEE: €150p.p. CERTIFICATION: Certificate of Completion 8 COMMERCIAL GAS SAFETY (CGS) AIM: The aim of this course is to provide qualified participants with the skills and knowledge relating to Safety Regulations, Procedures and Standards which must be applied to enable participants to carry out Gas work safely for commercial gas installations to manufacturer’s specifications and to comply with current regulations and codes of practice. The course will prepare candidates for the end of programme Theory and Practical Assessments. OBJECTIVES: On completion of this course the participant will have acquired an extensive insight into Commercial Gas Installations and Service and have acquired the skills and knowledge to safely carry out Commercial Gas Works. CONTENT: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Module 8 Module 9 Module 10 Module 11 Module 12 Module 13 Module 14 Module 15 Introduction Industrial & Commercial Gas Installation Systems Health & Safety Regulations Building Regulations Ventilation Flues Gas Rate Appliance Burner Pressure Flame Picture Pipe Sizing Strength Testing Soundness Testing Purging Commissioning Practical Workshop Products & Equipment, For Heating, Catering and Laundry TRAINEE PROFILE: A Qualified Plumbing, Electrician or Refrigeration Engineer. DURATION: 18 Days LOCATION: METAC Training COURSE FEE: €2150 CERTIFICATION: QQI Level 6 Award Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 9 Gas Cylinder Safety Aim: To increase the knowledge and awareness of safety requirements and emergency procedures for people with the responsibility for handling, disconnecting and removing gas cylinders. Course Content: Legislative Requirements Properties of Gas Hazard/ Risk Identifiaction PPE (Personal Protective Equipment) & Manual Handling Storage Requirements Cylinder Use & Associated Equipment Emergency Procedures & Accident Prevention Cylinder Handling Trainee Profile: People Handling Gas Cylinders Location: METAC Training Duration: 1 Day Course Fee: €150p.p Certification: Certificate of Completion Please Note: *This course can be tailored to suit different companies’ specific needs and requirements 10 OFTEC OIL Full Package 4 in 1 OFTEC 50/101/105e/600a Under the new Boiler Passport Scheme for all new oil boilers it is now a requirement to be certified to install and commission oil boilers. Also under the SEAI Home Energy Scheme it is now a requirement to be certified and compliant person to ISO 17024. OFT 50 - Domestic Oil Firing Introduction Course OFT 101 Domestic/Light Commercial Oil Firing Assessment OFT 105E Domestic/Light Commercial Oil Firing Installation Course OFT 600a - Oil Storage Tank Installation Course AIM: To upgrade the skills and knowledge of the craftpersons as oil burner service engineers and progress through further training and work experience to OFTEC registration. AIM: To provide assessment to prove the competence of existing oil burner commissioning and service engineers who already have gained experience or qualifications in the field. AIM: To upgrade the skills and knowledge of operatives on the installation and maintenance of oil storage tanks in the Domestic/Light Commercial sector. CONTENT: Safety Requirements Oil Specifications Fuel Efficiency Flues & Ventilation Float Control Values & Oil Lifters Burners Vaporising & Pressure Jet Type CONTENT: Safety Requirements Codes of Practice Current Standards Building Regulations Oil Specifications Fuel Efficiency Flues & Ventilation Oil Supply & Storage Burners Vaporising & Pressure Jet Type Burner Control, Start up and Shut down sequence Basic Fault Finding Techniques Heating System Considerations AIM: This module is for experienced central heating installers who want to become OFTEC Registered as Installation Technicians. It covers the regulations and standards’ applying to oil fired heating installations, and also includes assessment that leads to OFTEC Registration. Technical literature and course study notes are provided. Burner Control, Start up and Shut down sequence Servicing & Commissioning Procedures CONTENT: Safety Requirements Types of Oil Firing Heating & Cooking equipment Fuel Feed Pipework Flues & Ventilation Oil Storage Boiler Changeovers Heating System Circulation Thermostatic Controls Insulation CONTENT: Codes of Practice & Building Regulations Control of Pollution legislation Types of oil and their identification Steel & Thermoplastic oil storage tanks Constructional Standards Tank Fitting & Tank Supports Bunding & Delivery Considerations Oil Supply Systems & Pipe work installations Gauges & Overfill alarms systems Contamination problems & Maintenance TRAINEE PROFILE: Craft Certificate in Plumbing, Pipe Fitting/Welding, Heating & Ventilation, Refrigeration/Air Conditioning or any other fossil fuel qualification e.g. Gas, Solid Fuel etc. DURATION: 10 Days (2 days per week for 5 weeks – Mon/Tues, Wed/Thurs, Fri/Sat) LOCATION: METAC Training COURSE FEE: €1,800p.p. CERTIFICATION: Blueflame Certified & UKAS Accredited Successful candidates can obtain OFTEC registration as an oil installer /Commissioning/Service Technician SPECIAL OFFER €1,499p.p. Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 11 OFTEC 5 DAY REFRESHER OFTEC 101/105e/600a OFT 101 - Domestic/Light Commercial Oil Firing Assessment OFT 105E - Domestic/Light Commercial Oil Firing Installation Course Oft 600a - Oil Storage Tank Installation Course AIM : AIM : AIM : To provide training and assessment to prove the competence of existing oil burner commissioning and service engineers who already have gained experience or qualifications in the field. This module is for experienced installers who wish to maintain OFTEC Registration as Installation Technicians. It covers the existing and new regulations and standards applying to oil fired heating installations. To refresh and upgrade the skills and knowledge of operatives on the installation and maintenance of oil storage tanks in the Domestic/Light Commercial sector. CONTENT : CONTENT : CONTENT : Safety Requirements Codes of Practice Current Standards Building Regulations Oil Specifications Fuel Efficiency Flues & Ventilation Oil Supply & Storage Burners - Vaporising & Pressure Jet Type Burner Control, Start up and Shut down sequence Basic Fault Finding Techniques Heating System Considerations Safety Requirements Types of Oil Firing Heating & Cooking equipment Fuel Feed Pipe-work Flues & Ventilation Oil Storage Boiler Changeovers Heating System Circulation Thermostatic Controls Insulation Codes of Practice & Building Regulations Control of Pollution legislation Types of oil and their identification Steel & Thermoplastic oil storage tanks Constructional Standards Tank Fitting & Tank Supports Bunding & Delivery Considerations Oil Supply Systems & Pipe work installations Gauges & Overfill alarms systems Contamination problems & Maintenance TRAINEE PROFILE: Qualified/Certified Plumbers as well as experienced oil service technicians and installers who have previously completed OFT101 or OFT50 (with boiler manufacturers) and who wish to maintain their OFTEC registration LOCATION: METAC Training DURATION: 5 Days (2 day pre-course overview with course material, followed by a minimum of 7 days of home study and then 1 day of pre-assessment training, followed by 2 days of assessments) COURSE FEE: €950p.p. CERTIFICATION: Blueflame Certificate & UKAS Accredited Allows the participant to obtain and/or maintain OFTEC registration as an oil installer/commissioning/service technician Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 12 OFTEC 3 DAY REASSESSMENT AIM: The aim of this course is to reassess the candidate’s competence so as to ensure they are able to work safely and re-register as an OFTEC registered technician having completed their assessment to ISO 17024. OBJECTIVES: This course has been designed to provide the candidate with a 1 day introduction to new technologies and new operator procedures and 2 days of assessment. CONTENT: Course Outline Introduction to New Technologies & Procedures Assessment Procedures Workshop Practices TRAINEE PROFILE: Must be certified to ISO 17024 in the past to OFT101 LOCATION: METAC Training DURATION: 3 Days COURSE FEE: €490p.p. *Plus €160 for Books 1, 2, 3 & 4 CERTIFICATION: Blueflame Certification & UKAS Accredited Allows the participant to maintain OFTEC registration as an oil installer/commissioning/service technician *METAC Training can provide copies of books required for the assessment. Candidates can purchase these books if required for study pre-assessment. 13 OFT 201 COMMERCIAL OIL AIM: The aim of this course is to provide qualified participants with the skills and knowledge relating to Safety Regulations, Procedures and Standards which must be applied to enable participants to carry out work safely for commercial oil installations to manufacturer’s specifications and to comply with current regulations and codes of practice. The course will prepare candidates for the end of programme Theory and Practical Assessments. OBJECTIVES: On completion of this course the participant will have acquired an extensive insight into Commercial Oil Installations and Service and have acquired the skills and knowledge to safely carry out Commercial Oil Works. CONTENT: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Module 8 Module 9 Module 10 Introduction Commercial Oil Installation Systems Health & Safety Regulations Building Regulations Ventilation Flues Flame Picture Pipe Sizing Commissioning Practical Workshop Products & Equipment, Product Identification, Product Types, System Applications TRAINEE PROFILE: Qualified persons holding OFT 101,105e & 600a certification DURATION: 4 Days LOCATION: METAC Training COURSE FEE: €700 (includes OFTEC book 7, certification and assessment) CERTIFICATION: Blueflame Certification Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 14 DOMESTIC OIL FAULT FINDING & REPAIR AIM: The aim of this course is to provide qualified participants currently working in the oil heating market with refreshed skills and knowledge ensuring they are up-to-date with the latest developments and maintain good working practices. OBJECTIVES: To keep abreast of changes in the oil heating market To understand changes in building regulations To maintain good practice CONTENT: Basic Principles Changes in the Oil Industry Biofuels High Efficiency Boilers Fault Diagnosis Basic & Advanced Test Procedures including Combustion Flue Gas Analysing Fire Valve Testing Testing Rig Work Pressure Testing of Oil Lines Boiler Controls including Interlock Questions & Answers TRAINEE PROFILE: People working in the oil industry who would like to refresh their skills LOCATION: METAC Training DURATION: 1 Day COURSE FEE: €150p.p. CERTIFICATION: Certificate of Completion 15 Oil Tanker Drivers Course INTRODUCTION: The Course is designed for Oil Tanker Drivers so that drivers are aware of the main Safety issues surrounding the delivery of Oil along with a practical Training Workshop on Burner Bleeding, Problem Detection and follow on recommendations. OBJECTIVES: To help Oil Tanker Drivers understand the following: Health & Safety. Health Hazards, Hygiene Precautions. Safety Aspects of Petroleum Products, Protective Clothing. Environmental Aspects of Petroleum Products. Lone Workers & Safe Working Practice. Building Regulations. Control of Pollution Regulations. Agricultural Fuel Oil Regulations. Oil Filters. Fire Valves. Fuel Characteristics. Tank Types, Tank Fittings, Tank Supports & Bases, Tank Cleaning. Tank Location & Bunding, Internal Tanks, Underground Tanks, Tank Check. Oil Supply Systems. Delivery Site Safety. Fill Rate & Safe Working Capacity. Use of Ladders. Defect Reporting Procedures. Filling Into Drums. Fumes & Vapours. Access Hazards, Lifting Hazards. Burner Bleeding. Practical Training Workshop DURATION: 1 Day LOCATION: METAC Training COURSE FEE: €150p.p. CERTIFICATION: Certificate of Completion 16 Solid Fuel Awareness Training AIM: The aim of this course is to provide participants with the knowledge to enable them to assist customers in choosing the correct solid fuel appliance and to recognise the installation & fuel requirements. Content: Unit 1: Unit 2: Unit 3: Unit 4: Unit 5: Unit 6: Unit 7: Unit 8: Unit 9: Unit 10: Show an awareness of the solid fuel legislation that applies to work in dwellings Know and be able to identify solid mineral fuels and the factors affecting fuel selection Know the basic operating principals of solid fuel appliances Show an awareness of the factors which affect the selection of solid fuel appliances and be able to identify appliances and determine minimum operating efficiencies Know the principles of safe combustion of solid fuel Show an awareness of the ventilation requirements for solid fuel appliances in dwellings Show an awareness of the standards applying to chimneys and flue systems Show an awareness of the requirements of the hearth and fire surrounds Show an awareness of the different methods of linking solid fuel fired appliances with exsisting appliances Show an awareness of unsafe solid fuel situations TRAINEE PROFILE: Counter Hands LOCATION: METAC Training DURATION: 1 Day COURSE FEE: €150p.p Group discounts available. CERTIFICATION: Certificate of Completion 17 Dry Solid Fuel Stove Installer AIM: The aim of this course is to provide participants with the knowledge and understanding to enable them to install Dry stoves to meet the requirements of Customers, Building Regulations and Standards. Content: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Module 8 Module 9 Module 10 Introduction Health and Safety Regulations Building Regulations Combustion Ventilation Flues and Chimneys Fuels Product sizing Carbon Monoxide Hearths and surrounds TRAINEE PROFILE: Construction Professional LOCATION: METAC Training DURATION: 5 Day COURSE FEE: €750 CERTIFICATION: OFTEC 15-108-IRL (DRY) 18 Wet Stove Solid Fuel Installer AIM: The aim of this course is to provide participants with the knowledge and understanding to enable them to install Wet stoves to meet the requirements of Customers, Building Regulations and Standards. Content: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Introduction Health and Safety Regulations Building Regulations Open Heating Systems Interlinking Heating Systems Product sizing Carbon Monoxide TRAINEE PROFILE: Plumber with OFT15-108-IRL (DRY) LOCATION: METAC Training DURATION: 3 Day COURSE FEE: €450 CERTIFICATION: OFTEC 15-108-IRL (WET) 19 VERIFICATION & CERTIFICATION AIM: To update the skills of electricians operating in the electrical industry, to verify, test, complete test records, and completion of certificates to comply with Safe Electric requirements. OBJECTIVES: On successful completion of this training the candidate will be able to, Visually inspect a electrical installation and identify faults Test the electrical system using required instruments to verify safety within the system in accordance with ET101 Enable you to meet the requirements of clause 1.2.12 (iii) of section C of the CER Criteria Document Enable you to obtain a QC number CONTENT: Module 1 Pre assessment test on electrical safety Module 2 Visual inspections of faults on electrical systems Module 3 Inspection and test of domestic circuits, continuity, insulation resistance, polarity, loop impedance and RCD operation Module 4 Complete test record sheets and completion certificates TRAINEE PROFILE: (i) Served a recognised apprenticeship as an electrician and having been awarded a National Craft Certificate or (ii) Another suitable electrical award, equivalent to Level 6 or higher on the National Framework of Qualifications COURSE DURATION: 2 Days or 5 Days Subject to experience on Testing and Verification COURSE FEES: €410 for 2 Days or €790 for 5 Days CERTIFICATION: City & Guilds qualification 2407 Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. This course may be offered as an evening course. Call us for details. 20 ELECTRICAL SAFETY (MINOR WORKS) AIM: The aim of this course is to provide participants with the skills and related knowledge to enable them to work safely on electrical installations while carrying out minor works. It will also provide a fundamental understanding of electrical safety. OBJECTIVES: Extensive insight into electricity safety and procedures To be able to use electrical testing equipment Understanding of domestic electrical system CONTENT: Module 1 Electrical Safety Requirements Module 2 Electrical Fundamentals, Voltage, Current Resistance, Power Module 3 Testing procedures and safe isolation Module 4 Practical Workshops Practical Training Workshops on installing electrical fittings using appropriate tools and instruments. TRAINEE PROFILE: Appliance service Technicians, general Maintenance Persons and people wishing to gain additional knowledge in electrical safety. DURATION: 3 Days LOCATION: METAC Training COURSE FEE: €495p.p. CERTIFICATION: Blueflame Certified (Minor Works) Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 21 RAINWATER HARVESTING AIM: The aim of this course is to equip trainees with the relevant knowledge and technical competence to install and maintain rainwater harvesting systems. OBJECTIVES: Understand the importance of water as a valuable resource Appreciate the broad scope of the water framework directive Develop an awareness of river catchments and river basin districts Understand the role of new technologies and new concepts in water management Be familiar with sustainable water management strategies Understand water collection, storage systems, filtration stages and water treatment Establish the characteristics and difference between direct and gravity Rainwater Harvesting Systems Carry out risk assessments prior to commencing an installation and adhere to relevant Health & Safety guidelines Design and learn how to install a Rainwater Harvesting System CONTENT: Unit 1: The Water Cycle Unit 2: Fluvial Processes Unit 3: Water Management in Natural Environments Unit 4: Threats to Water Quality Unit 5: Water Protection Unit 6: Practical Training Workshops Products & Equipment, Product Identification & Product Types TRAINEE PROFILE: Architect, Farmer, Plumber, Building Professionals, Engineers or anyone interested in installing Rainwater Harvesting Systems DURATION: 3 Days LOCATION: METAC Training COURSE FEE: €495p.p. CERTIFICATION: METAC Certificate of Completion Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 22 PASSIVE HOUSE BUILDING ENVELOPE & SERVICES SPECIALIST AIM: From the outside, Passive House buildings are no different from conventional buildings, because the term “Passive House” refers to a standard and not a certain construction method. Good planning and careful implementation of details are decisive factors in the construction of Passive House buildings, the world’s leading standard in low energy, sustainable construction. The aim of this training for the ”Certified Passive House Tradesperson” certificate is to convey an overall impression of the interdisciplinary Passive House concept to tradesmen involved in the construction industry. CONTENT: Passive House – Interdisciplinary principles Passive House Definition Passive House Criteria The 5 pillars of the Passive House principles Ecology and comfort PHPP and other planning principles Economic efficiency Construction process and quality assurance User information and user support Building Envelope Specialist - Training Thermal insulation in the Passive House Thermal bridge free construction Passive House Windows Summer comfort Refurbishment of existing buildings using Passive House components Building Services Specialist - Training Air-tightness Specialist – practical training Ventilation Air-tightness & Building Why is ventilation Regulations essential? Blower Door Controlled home Demonstration ventilation with heat Practical Air-tightness recovery installation with Ampack Individual components Air-tightness of ventilation systems Heating via fresh air in membranes Passive Houses Practical Air-tightness Heating in the Passive to windows and House membrane penetrations Heat generation and with Ampack window heat distribution in the tapes. Passive House Implementation-relevant Wind-tightness details membranes & Tapes Refurbishment of existing buildings TRAINEE PROFILE: Experienced qualified tradepersons working in the construction industry. DURATION: 5 days COURSE FEE: €650 CERTIFICATION: The Passivhaus Tradesperson qualification is internationally accredited by the Passivhaus Institut in Germany. On successful completion of the exam participants are listed on the Passivhaus Tradesperson database. There are 3 parts to the exam, all participants must sit part 1, part 2 is envelope specialist and part 3 is services specialist – participants can sit either of these disciplines or both. If you pass both you will receive two certificates. Each part is 45 mins long. The fee for the exam for international accreditation is 195euro which covers exam marking & 5 year certification from the Passivhaus Institut. All participants get a free listing on website www.passivehousetradesman.com 23 PASSIVE HOUSE DESIGNER COURSE AIM: The course is a challenging and intensive course of instruction, and is aimed at qualified and motivated building professionals who have a passion to learn the art of Passive House design, the world’s leading standard in low energy, sustainable construction. COURSE CONTENT: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Definition of a Passive House Passive House criteria Basic principles of planning a Passive House 3.1 Thermal insulation – basics 3.2 Airtight envelopes – basics 3.3 Transparent exterior components – basics 3.3.1 Window U-values according to EN 10077 3.3.2 Heat gain through windows according to PHPP 3.3.3 Impact on summer comfort Ventilation in a Passive House – basics 4.1 Why is ventilation essential? 4.2 Natural ventilation 4.3 Exhaust systems 4.4 Balanced supply and exhaust air systems with heat recovery Principles of heating systems for Passive Houses Summer comfort – basics Electrical energy Principles of energy balancing (PHPP) Basics of economic efficiency calculation Invitations to tender and allocation Construction site management and quality assurance Information and support for occupants Refurbishments using Passive House components Calculation, quantities, units Non-residential buildings TRAINEE PROFILE: Diploma/ Degree in Built Environment Related Discipline. DURATION: 10 days LOCATION: METAC Training COURSE FEE: €1,495p.p (includes PHPP software) CERTIFICATION: Course Participants will be given the option to sit the exam for international accreditation as “Certified Passive House Designer or Consultant”. The fee for this is €300 which covers exam marking & 5 year certification from the Passivhaus Institut. Note: Course is offered in conjunction with Target Zero international accredited course providers & exam body by the Passivhaus Institut in Germany. 24 AIR & WIND TIGHTNESS AND INSULATION INTRODUCTION Overview of insulation properties including U R and K Values. Insulation advantages and disadvantages along with all environmental impacts. Natural Insulations and Responsible specification AIR-TIGHTNESS & ITS EXECUTION ON SITE Introduction to Air-tightness Air-tightness & Building Regulations Condensation dangers and their impacts Ventilation considerations Intelligent moisture management Conventional Details for Irish Construction Material specifications for specific Air-tightness applications Questions and answers WIND TIGHTNESS & ITS EXECUTION ON SITE Introduction to Wind-tightness Condensation dangers and their impacts Ventilation considerations & cross Battening Types of Wind-tight barriers advantages &disadvantages Conventional Details for Irish Construction Questions and answers HANDS ON PRACTICAL APPLICATION AND DEMONSTRATIONS Insulation demonstrations for roofs, walls and floors Practical Air-tightness installation with Ampack Air - tightness membranes Practical Air-tightness to windows and membrane penetrations with Ampack window tapes. Practical Wind-tightness installation with Ampack Wind-tightness membranes & Tapes Summary/Questions and answers DURATION: 1 Day LOCATION: METAC Training COURSE FEE: €65p.p. CERTIFICATION: Ampack Certification, Certificate of Completion CPD available on completion. *Each participant will receive a sample pack with material samples brochures and an Irish detail hand book. 25 AIR PRESSURE TESTING AIM: The aim of this course is to provide participants with the skills and related knowledge to enable them to carry out Air Pressure Testing. Since 1st July 2008 all new single dwellings are required to have an Air Pressure Test. OBJECTIVES: The programme will provide an extensive insight into Air Pressure Testing and the recommended use of the equipment to prepare candidates for the end of programme examinations leading to certification. The course will help participants to understand: Air Pressure Tests used to evaluate the energy efficiency of new and existing buildings Air Leakage Testing which helps to identify areas of a building experiencing excessive ventilation heat loss Air Leakage Testing to determine the effectiveness of fire-stop between adjacent houses and apartments How Air Leakage Testing plays a vital role in building an A-Rate house CONTENT: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Module 8 Module 9 Module 10 Module 11 Introduction Health & Safety Understanding Air Pressure Testing Regulation & Legislation Air Pressure Standards Requirements for Testing Air Pressure Test Equipment Carrying out the Test Test Reports Practical Training Workshop on relevant Equipment & System Applications Assessment This 3 day course is broken down into 2 days of theoretical material interspersed with practical workshops developed to introduce the recommended operation of the equipment and gauges. The third day is set aside for the examination process that includes a written examination, a practical test to measure the area of a structure and seal the area prior to testing. The students are then required to complete a full test of the structure using the equipment available, following the technical standard including a report of the finding. TRAINEE PROFILE: Persons interested in energy efficiency DURATION: 3 Days LOCATION: METAC Training COURSE FEE : €1050p.p. CERTIFICATION: Certified course that conforms to the EN 13829 Standard & the ATTMA TS-1 method and is endorsed by BINDT, a UKAS accredited organisation Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 26 SOLAR DOMESTIC HOT WATER MAINTENANCE AIM: To provide participants with the skills and knowledge required for solar thermal system servicing and fault finding. OBJECTIVES: This course will cover all aspects of solar thermal system components, how they operate and their maintenance requirements. CONTENT: Solar Panels/Collectors Solar Pumping Station Solar Controller Expansion Vessels Pressure Relief Valves Solar Sensors Solar Fluid/Antifreeze Domestic Hot Water Cylinders Buffer Vessels Commissioning Solar Thermal Systems Fault finding TRAINEE PROFILE: Plumbers, Maintenance Technicians, Engineers DURATION: 1 Day LOCATION: METAC Training COURSE FEE: €150p.p. CERTIFICATION: Certificate of Completion 27 MICRO SOLAR PHOTOVOLTAIC SYSTEMS IMPLEMENTATION Aim: Describe the main solar PV cell technologies, recognise the factors that affect solar PV output, summarise the planning requirements for Solar PV installations, Identify the relevant legislation standards and regulations governing Solar PV installations, Describe appropriate maintenance techniques for Solar PV systems, Adhere to the relevant Health & Safety requirements. Objectives: The objective of this course is to equip the learner with the relevant knowledge, skill and competence to implement micro scale solar photovoltaic (PV) projects, up to 11kW. Content: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Module 8 Module 9 Module 10 Module 11 Module 12 Module 13 Photovoltaic cell technologies. Solar PV output. Planning requirements for Solar PV installations. Legislative and regulatory considerations. Maintenance requirements for Solar PV systems. Identification of potential hazards during the installation process. Health & Safety requirements. Installation sequence for Solar PV systems. Considerations for roof-mounted Solar PV systems. Roof loading and load bearing capacity. Tools. Feasibility study and Design layout. Conformance and testing of Solar PV systems. Practical Training Workshops on Products & Equipment, Product Identification & Product Types. TRAINEE PROFILE: Construction or Trade Background DURATION: 10 days LOCATION: METAC Training COURSE FEE: €1,500p.p CERTIFICATION: QQI Level 6 SPECIAL OFFER €1,299p.p Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 28 SMALL SCALE WIND SYSTEMS IMPLEMENTATION Aim: The aim of this full-time 10 day programme is to provide learners with the knowledge, skills and competence to plan, design and install wind turbine projects for small systems. This programme comprises one compulsory programme module and learners who successfully complete this programme will achieve a QQI Special Purpose Level 6 Award in Implementation of Small Scale Wind Systems (6S0325). Objectives: The objective of this course is to equip the candidate with the relevant knowledge, skill and competence to install and service small scale wind systems with a rotor swept area of up to 200 M2, in accordance with manufacturer’s instructions, and relevant legislation and standards. CONTENT: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Module 8 Module 9 Module 10 Module 11 Feasibility study of small scale wind turbines Wind turbine output. Planning requirements for wind turbine installations. Legislative and regulatory considerations. Raising and lowering wind turbines. Identification of potential hazards during the installation process. Health & Safety requirements. Installation sequence for wind systems. Tools and equipment required. Maintenance requirements for wind turbines. Conformance and testing of micro wind systems. Practical Training Workshops on Products & Equipment, Product Identification & Product Types. TRAINEE PROFILE: Numerical aptitude Spatial aptitude Ability to extract and gather information Experience in organising people and coordinating resources and timescales desirable. A knowledge of building construction is required. An ability to work at heights. DURATION: 10 days LOCATION: METAC Training COURSE FEE: €1,500p.p CERTIFICATION: QQI Level 6 SPECIAL OFFER €1,299p.p Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 29 MICRO-GENERATOR ELECTRICAL INSTALLATION Aim: The aim of this full-time 5 day programme is to provide learners with the knowledge, skills and competence to, install and connect micro PV and wind turbine systems. This programme comprises one compulsory programme module and learners who successfully complete this programme will achieve a QQi Special Purpose Level 6 Award in Implementation of Micro-Generator Electrical Installation (6S0307). Objectives: The objective of this course is to equip the candidate with the relevant knowledge, skill and competence to perform electrical installation, connecting testing, commissioning and service of micro generators with a type-approved network interface in accordance with applicable standards, manufactures instructions, guidelines, relevant legislation and standards. Content: Module 1 Understanding the key characteristics of micro-generating systems Module 2 Power generating with variable voltages and frequency output. Module 3 Understand output controls of wind generators to include dump loads and electrical braking. Module 4 Legislative and regulatory considerations. Module 5 Raising and lowering wind turbines. Module 6 Identification of potential hazards during the installation process. Module 7 Health & Safety requirements. Module 8 Installation sequence for wind and PV Systems. Module 9 Tools and equipment required. Module 10 Maintenance requirements for wind and PV systems. Module 11 Conformance and testing of wind and PV generation systems. Practical Training Workshops on Products & Equipment, Product Identification & Product Types. TRAINEE PROFILE: Numerical aptitude, Spatial aptitude Ability to extract and gather information. Experience in organising people and coordinating resources and timescales desirable. Suitable recognised qualification in electrical installation. An ability to work at heights. DURATION: 5 days LOCATION: METAC Training COURSE FEE: €750 CERTIFICATION: QQI Level 6 Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 30 ELECTROFUSION AIM: The aim of this course is to equip trainees with the relevant knowledge and technical competence to join polyethylene pipe safely using Electrofusion techniques. OBJECTIVES: Understand Electrofusion Techniques and the Benefits Understand Water Piping on site & safety implications when carrying out Electrofusion Examining alternative machines for fusion of MDPE and LDPE pipework and fittings Testing and commissioning of PE pipe Understanding installation procedures of mains pipework and connection to water meters Work in accordance with Health & Safety regulations Theoretical & Practical Assessment CONTENT: Understand the essential elements required to make successful joints using Electrofusion methods Demonstrate the ability to join PE pipes together in line with industry standards Correctly set up Electrofusion equipment ready for operation Correctly clean and clamp PE pipe in order to eliminate joint faults Demonstrate the ability to use an Electrofusion unit Quality assurance application to completed joints, to ensure suitability to carry water TRAINEE PROFILE: Building Professionals, Plumbers, Drainage Contractors, Groundworks Personnel DURATION: 3 Days LOCATION: METAC Training COURSE FEE: €595p.p. CERTIFICATION: Blueflame Certified Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 31 UNVENTED CYLINDERS AIM: The aim of this course is to train candidates in the Installation and Safety Requirements of Unvented Hot Water Cylinders. The candidate will also gain an understanding of Building Regulation Part G. OBJECTIVES: The programme will provide an extensive insight into Unvented Hot Water Cylinders and will prepare candidates for end of programme examinations leading to recommendation to Blueflame for certification. Upon completion of the course the candidate will be able to: Recognise the various forms of hot water supplies State the functional requirements of Unvented Domestic Hot Water systems Design an Unvented system to comply with Part G of the Building Regulations Carry out commissioning of an Unvented System State and rectify common causes of faults in an Unvented System CONTENT: Module 1 Module 2 Module 3 Module 4 Module 5 Module 6 Module 7 Introduction to Health & Safety Domestic Hot Water Supply Options, Tanks, Boilers, Heaters Legal Requirements – Controls, Valves, System Layout Cylinder Schematics , Construction & Materials Installation, Pressure & Flow, Discharge System Faults, Commissioning, Maintenance Practical Workshop Practical Training Workshop on Product Identification, Product Types, Product Maintenance, System Applications TRAINEE PROFILE: People involved in Heating Systems Installation DURATION: 2 Days LOCATION: METAC Training COURSE FEE: €350p.p. CERTIFICATION: Blueflame Certified SPECIAL OFFER €275p.p. Please Note: Application Forms with all details including payment must be completed before training/assessment commences. Three recent photographs (passport style and size in colour) must be submitted with each application. 32 POWER FLUSHING AIM: The aim of this course is to provide participants with the skills and knowledge in how to power flush a system. It will also provide information on the procedures which need to be carried out prior to starting the flushing as well as the chemicals required. OVERVIEW: This course has been designed for people with a good knowledge of plumbing systems and who are practically minded. It is ideal for anyone interested in learning how to use a power flushing machine and chemicals for both removing sludge from a system and also protecting the system after flushing. CONTENT: Preparing your system for power flushing Power flushing procedure Heating system preparation Connections and controls of the power flushing unit Fernox system cleaners Practical workshop Connecting a power flushing unit to a heating system, adding cleaners to the system, reverse flow action on the power flushing unit, disconnection of the unit and cleaning out the filters TRAINEE PROFILE: People working with heating systems DURATION: 1 Day LOCATION: METAC Training COURSE FEE: €150p.p. CERTIFICATION: Certificate of Completion 33 FLUE GAS ANALYSERS AIM: The aim of this programme is to provide oil, gas and renewable energy specialists with a comprehensive understanding and practical knowledge of flue gas analysers, their application and benefits and all other issues with their use. OBJECTIVES: Understand Flue Gas Analysis Understand Pressure Tests Understand Let By Tests Understand Tightness Tests Understand Temperature Tests Understand Room CO Safety Tests Understand Gas Escape Tests Understand Operation and Maintenance Understand Calibration CONTENT: Flue Gas Analysers Tests: Pressure, Let By, Tightness, Temperature, Room CO Safety, Gas Escape Calibration Practical Training Workshop Introduction and Training on carrying out various tests on various Oil and Gas boilers and other installations using an Analyser. Emission Tests CO2 O2 Efficiency TRAINEE PROFILE: Installer, Service & Repair Engineers DURATION: 1 Day LOCATION: METAC Training COURSE FEE: €150p.p. CERTIFICATION: Certificate of Completion 34 MECHANICAL VENTILATION HEAT RECOVERY INSTALLER COURSE AIM: This MVHR Installer course provides installers with the opportunity to learn new skills and increase their scope of work. Enables candidates to install any domestic mechanical ventilation heat recovery system safely and efficiently. Helps understanding MVHR along with heating load and supply air heating. This course also emphasizes the most common systems and configurations that most installers are likely to encounter CONTENT: Air Quality, Control of Humidity & CO2, Noise levels Role & benefits of mechanical ventilation heat recovery Components of a ventilation unit & system Design a system for a single-family-house, ductwork planning, silencers, zoning for supply and extract & transfer Calculation of energy saving and running costs Sizing of system, sizing ducting, dimensioning the air flow rate Practical demonstrations of component installation Balancing the system using an hood capture anemometer Commissioning, user guidelines, maintenance, filters etc As part of this course air-tightness testing will also be covered. Requirements, results and how the buildings air-tightness affects MVHR systems efficiency. A blower door test demonstration is also carried out Introduction to the decentralized system TRAINEE PROFILE: Plumbers, Builders, Insulation Personnel, Engineers, Designers, Electricians, Heat Merchants, Apprentices, Architects, Consultants, M&E Contractors DURATION: 2 Days LOCATION: METAC Training COURSE FEE: €450p.p. CERTIFICATION: Certificate of Completion SPECIAL OFFER €300p.p. 35 BUSINESS COURSES AVAILABLE Computers for Beginners Course Duration: 2 hour class x 10 Cost: €130 Information & Technology Skills QQI Level 4 Course Duration: 2 hour class x 10 Cost: €205 Accounting Technicians Ireland Year 1 & 2 Course Duration: 2 Nights per week x 25 weeks Cost: €1,300per year (& €690 for course books payable to Accounting Technicians Ireland) Special Needs Assistant QQI Level 5 Course Duration: 3 hours class x 10 Cost: €440 Special Needs Assistant QQI Level 6 Course Duration: 3 hours class x 10 Cost: €740 Arc Welding (Certified) Course Duration: 9 Weeks X 2 hour class Cost: €330 MIG/TIG Welding Course Duration: 6 Weeks X 2 hour class Cost: €495 36 HOBBY COURSES AVAILABLE Digital Photography Course Duration: 6 Weeks X 2 hour class + 2 Field trips Cost: €110 Arc Welding(Uncertified) Course Duration: 8 Weeks X 2 hour class Cost: €255 Gardening Design Course Duration: 8 Weeks X 2 hour class Cost: €95 Dog Grooming Course Duration: 6 Weeks X 2 hour class Cost: €150 Sugar Craft Course Duration: 3 Weeks X 2 hour class Cost: €90 Beauty, Make-up and Skincare Course Duration: 6 Weeks X 2 hour class Cost: €95 Hairdressing Up-Styles Course Duration: 6 Weeks X 2 hour class Cost: €95 37 METAC Stickers METAC have introduced van stickers, in conjunction with ARACHAS Insurance, as a means of identifying the candidates trained at METAC who have successfully completed their qualifications in Gas, Oil, Electrical and Renewable training. This was introduced following enquiries from both the public and installers and is deemed as a mark of quality. 38 SERVICES The following companies have agreed to offer preferential rates to METAC Trainees Parts & Equipment Heat Services Ltd (Veronica) Tel: 057-8756504 Insurance Arachas Insurance (Gearoid) Tel: 0818-307030 Mob: 086-8969234 Finance AIB Portlaoise (Paul) Tel: 086-6086691 Equipment Heating Engineer Supplies (Charlie) Tel: 086-0455812 Accommodation Maldron Hotel Tel: 057-8695900 Motoring K&M Motors (Ken) Tel: 057-8723041 Location in Mountrath Exit: 18 from the M7 Sat Nav: N - 53 - 0.153 W - 7 - 28. 200 39 Why train with METAC Training? Award Winning, practical and hands on training and assessment by experts in their field Use of top of the range training equipment and facilities Choice of a wide range of courses providing national and international qualifications Convenient location in the heart of Ireland just off the M7 Value for money training Here’s just a little of what some previous candidates have said about us… “I highly recommend METAC Training to anyone who would like to invest in themselves, after attending 3 full time and 1 day course. I would like to commend there top class trainers and the personal attention from METAC staff. Great experience overall.“ Tom Lynch May 2014 “I was recommended to do my training in METAC by a local FÁS/SOLAS office…The instructors work in the industries in which they train so their knowledge and information is second to none…A very positive experience.” Gerry Kinsella (Self Employed Plumber) Call us on 057-8756540 to book your place Mountrath Enterprise Park Portlaoise Road Mountrath Co. Laois Tel: 057-8756540 Email: info@metac.ie Web: www.metac.ie OPEN 6 DAYS (Monday-Saturday) 40