Specification Sheet / Ingrade / L02
Specification Sheet / In-grade / L02
L02
Application
Interior directional in-grade light for lighting walls, columns,
architectural features or landscape features. Applicable for
mounting into floors, walls, ceilings or other surfaces where
a non-obtrusive luminaire is required.
IP Rating
40
Mounting
Comes with steel flange which mounts to pre-installed
standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep
minimum and 1/4” (6mm) setback from face of drywall. Can
be wall or ceiling mounted.
Electrical
DC - Powered by remote 350mA (1W) or 700mA (2.5W)
DC driver. Recommended LED10W350D (1W) and
LED17W700D (2.5W).
Dimmable drivers available (not included). AC Recommended TLW120MT050-01 / TLW277MT050
magnetic transformer (not included).
Consult factory for dimming option.
Type:
Power
Consumption
1.5 Watt (at 350 mA, 1.0 Watt)
Light Output
1.0 Watt, 51~61lm
2.5 Watt, 78~82lm
*For photometric data, see page 03
Warranty
5 years limited warranty
Estimated useful life of LED is 50,000 hours.
Material
Solid anodized aluminum, brass or stainless steel (316) with
1/4” (6mm) thick tempered glass lens. RoHS compliant.
Weight
0.35lbs (0.158kg)
Project:
Modified:
Quantity:
Notes: PLEASE READ - When using a control system, consult dimming system manufacturer
with minimum load before installing 12V AC transformer. Malfunction and damage to
product due to improper dimming system installation or misuse will not be covered under
warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for
recommended drivers.
3.0 Watt (at 700 mA, 2.5 Watt)
Approval
Order Guide
Example: L02-1-W20S-S-C-LM-0-A-MA
Code
Wattage
Color
Beam
Lens
(Option)
Angle Bracket*
Input Voltage
L02 -
Finish
1 = 1W W20S = 2000L, std CRI
2 = 2.5W W27S = 2700K, std CRI
W30S = 3000K, std CRI
W35S = 3500K, std CRI
W41S = 4100K, std CRI
W27H = 2000K, high CRI
W30H = 3000K, high CRI
W35H = 3500K, high CRI
A = 1 2V AC
0 = no angle
C = clear
LM = louver, matte
S = spot (12°)
(available for W20S,
30 = 30° angle
anodized
N = narrow flood (30°) F = frosted
W27S, and W30S only)
45 = 45° angle
LB = louver, black
W= wide flood (120°)
X = custom (30° max.) D = DC
anodized
HM = hex louver, matte
* Max. 30° angle bracket with
anodized
louver option.
HB = hex louver, black
* Internal angle bracket factory
anodized
set. Cannot be field adjusted.
MA = matte clear anodized
BA = black anodized
BZ = bronze anodized
ABZ = antique bronze
S6 = stainless steel 316
PBR = polished brass
ABR = antique brass
All technical information in this document is subject to change. Copyright © MP Lighting. All technical informationwww.mplighting.com
t 1.877.708.1184
f 604.708.1185
in this document is subject
to change. Copyright
MP Lighting.
www.mplighting.com t 1.877.708.1184 f 604.708.1185
4-2016
Specification Sheet / In-grade / L02
L02
Dimension:
1”
25mm
thickness
or drywall
Face of
drywall
3-1/2”
89mm
22mm
Power Consumption: 1.5W / 3W
Ø2-1/2”
Ø62mm
1-3/4”
49.5mm
Electrical: 1W, 350mA or 2.5W, 700mA LED.
LED Input Voltage: 4V DC or7/8”
12V AC
Angle
Ø1-5/8”
Ø41mm
Application: Exterior/interior directional in-grade light for lighting walls,
columns, architectural features or landscape features. Applicable for mounting
into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire
is required.
Ø2-1/2”
Ø4-1/8”
Ø105mm
Power Supply: DC - Powered by
remote 350mA (1W) or 700mA (2.5W)
Ø64mm
DC driver. Recommended LED10W350D (1W) and LED17W700D
(2.5W). Dimmable drivers available (not included). AC - Recommended
TLW120MT050-01 / TLW277MT050 magnetic transformer (not included).
Consult factory for1-3/4”
dimming option.
44mm
Weight: 0.35lbs (0.158kg)
Material: Solid anodized aluminum or stainless steel (303/316) with 1/4”
(6mm) thick tempered glass lens. RoHS compliant.
Mounting: Comes with steel flange which mounts to pre-installed standard
4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm)
setback from face of drywall. Can be wall or ceiling mounted.
Approval: Dry locations. Approved to US and Canadian standards by CSA.
Light Distribution:
1Watt
Emergency Driver options (remote):
MP Lighting Emergency Backup Unit.
Input: 100-277V, 50/60Hz / Output: 11-36V, 16W
Bodine Emergency Micro Inventer
Input: 120/277V, 50/60Hz / Output: 120/277V, 60Hz, 20W
Type:
12° (Spot Beam), Clear lens,
Matte clear anodized
30° (Narrow Flood Beam), Clear lens,
Matte clear anodized
Notes:
2.5Watt
12° (Spot Beam), Clear lens,
Matte clear anodized
Project:
120° (WideModified:
Flood Beam), Clear lens,
Matte clearQuantity:
anodized
30° (Narrow Flood Beam), Clear lens,
Matte clear anodized
120° (Wide Flood Beam), Clear lens,
Matte clear anodized
All technical information in this document is subject to change. Copyright © MP Lighting.
www.mplighting.com t 1.877.708.1184 f 604.708.1185
All technical information in this document is subject to change. Copyright MP Lighting.
www.mplighting.com t 1.877.708.1184 f 604.708.1185
12-2014
4-2016
Specification Sheet / In-grade / L02
L02
Photometric data:
Application: Exterior/interior directional in-grade light for lighting walls,
3000K,
Clear lens
columns, architectural2.5W,
features
or landscape
features. Applicable for mounting
into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire
is required.
Polar Candela
Distribution
Isofootcandle Plot
1W, 3000K, Clear lens
Polar Candela Distribution
L02
1W, 12°
Clear lens
3000K Std
64 lm
Isofootcandle Plot
Polar Candela Distribution
Isofootcandle Plot
Lumen: 51lm, Spot beam (12°)
180°
135°
0
2
4
6
8
10
4
2
-90°
90°
L02
2.5W, 12°
12
Clear
lens
3000K Std
76 lm
Polar Candela Distribution
Isofootcandle Plot
Electrical:
1W, 350mA
Lumen: 78lm,
Spot beam
(12°) or 2.5W, 700mA LED.
180°
LED
Power Consumption: 1.5W / 3W
0.1 fc
0
2.5
1.0
0.5
-90°
0.2
2
approx. 282 cd max.
L02
1W, 30°
Clear lens
3000K Std
46 lm
0°
-0°
4
-90°
6
Mount height: 1 ft Total LLF: 1
45°
Polar Candela Distribution
Isofootcandle Plot
Lumen: 61lm, Narrow Flood (30°)
180°
135°
0
2
4
6
8
10
4
2
-90°
90°
L02
2.5W, 30°
12
Clear lens
3000K Std
73 lm
0.5
1.0
0.2
approx. 179 cd max.
L02
1W, 120°
Clear lens
3000K Std
42 lm
0°
4
-90°
6
-90°
180°
135°
2
-90°
90°
0
approx. 15 cd max.
0°
45°
4
-90°
6
12
Mounting: Comes with steel flange 4which mounts to pre-installed standard
4” (102mm) octagonal box, 1-1/2” 2(38mm) deep minimum and 1/4” (6mm)
setback from face of drywall.
1mounted.
0.2
0.5
90° Can be0wall or ceiling
2.5
2
4
6
0.1 fc
0.2
0.5
1.0
2.5
8
10
L02
2.5W, 120°
12
Clear
lens
3000K Std
76 lm
0°
-90°
4
6
Mount height: 1 ft Total LLF: 1
45°
Polar Candela
Distribution
Lumen:
78lm, Wide
Flood (120°)
Isofootcandle Plot
Emergency Driver options (remote):
180°
135°
0
2
4
6
8
10
12
MP Lighting Emergency Backup Unit.
Input: 100-277V, 50/60Hz / Output: 411-36V, 16W
-90°
2
Bodine Emergency Micro Inventer
0.2 20W
0.1
90°
5 1 60Hz,
Input: 120/277V, 50/60Hz / Output: 0120/277V,
2
-0°
10
Mount height: 1 ft Total LLF: 1
-0°
0
4
8
4
45°
approx. 286 cd max.
Isofootcandle Plot
Lumen: 51lm, Wide Flood (120°)
6
2 US and Canadian standards by CSA.
Approval: Dry locations. Approved to
Mount height: 1 ft Total LLF: 1
45°
Polar Candela Distribution
4
2
Power Supply: DC - Powered by remote
350mA (1W) or 700mA
0.1 (2.5W)
0
90°
0.5
0.2
2.5 and
1 LED17W700D
DC driver. Recommended LED10W350D
(1W)
(2.5W). Dimmable drivers available 2(not included). AC - Recommended
TLW120MT050-01 / TLW277MT050
-0°
4 magnetic transformer (not included).
approx.
364 cdformax.
Consult
factory
dimming option.
-90° 6
0°
2
-0°
2
Weight: 0.35lbs (0.158kg)
Polar Candela
Distribution
Isofootcandle Plot
Lumen:
82lm, Narrow
Flood (30°)
Material: Solid anodized aluminum or stainless steel (303/316) with 1/4”
180°
0
2
4
6
8
10 12
(6mm) thick135°
tempered glass lens. RoHS
compliant.
0.1 fc
0
135°
Input Voltage:
4V DC or 12V AC0
2
approx. 28 cd max.
Type:
Mount height: 1 ft Total LLF: 1
0°
Project:
Modified:
Quantity:
45°
-0°
4
-90°
6
Mount height: 1 ft Total LLF: 1
Notes:
All technical information in this document is subject to change. Copyright © MP Lighting.
www.mplighting.com t 1.877.708.1184 f 604.708.1185
All technical information in this document is subject to change. Copyright MP Lighting.
www.mplighting.com t 1.877.708.1184 f 604.708.1185
03-2015