 Metal Molding and Trim
 Read each product number according to the following example: 2131A72
– “2131” refers to the part profile number. “A” refers to the part finish. “72”
refers to the part length in inches.
 Fasteners (nails or screws) are included.
 All molding and trim is extruded aluminum (unless otherwise noted).
 Carpet Bar
 Covers and protects carpet edges to provide a finished appearance.
 All have a fluted finish.
 2132A installed.
2131A36
2131A72
2131G36
2131G72
2132A36
2132A72
2132G36
2132G72
 Provided with drive nails.
 Provided with drive nails.
2134G36
2134G72
2134A36
2134A72
 Provided with drive nails.
 Carpet Bar – Tap Down Style
 Z-Bar
 All have a fluted finish.
 Roll-form product.
 Fasteners not included.
2130A48
2137A36
2137A72
2137G36
2137G72
2138A36
2138A72
 2138A installed.
2138G36
2138G72
 Provided with drive nails.
 Provided with drive nails.
 Tap-down, pinless style, for use
with rubber-backed carpets.
 Tap-down style, with pins, for use
with jute-backed carpets.
Finish Designations: (pages 138-139)
A
mill finish aluminum
C
clear anodized aluminum
G
gold anodized aluminum
SS
mill finish stainless steel
 Seam Binding
 Covers seams and joints in linoleum, floor tile, carpet, and other similar floor coverings.
Please refer to the listings under each product for stocked
finishes. See page 7 for a complete list of all Pemko
stocked and non-stocked finishes. Consult the factory
for the price and availability of non-stocked finishes.
 All have a smooth finish.
2220S150 (coiled)
2250A150 (coiled)
 Provided with nails.
 Provided with nails.
 Roll-form product.
 Roll-form product.
 .012 gauge stainless steel.
 .020 gauge aluminum.
 Finish: BA (Bright Annealed).
2218A36
2218A72
2218G36
2218G72
 Provided with drive nails.
VENTURA, CA
PH
138
WHITTIER,
CA
WHITTIER,
WHITTIER,CA
CA
2
2219C36
2219C72
2219G36
2219G72
 Provided with drive nails.
800 • 283-9988
 2219C installed.
MEMPHIS, TN
800 • 824-3018
 Stair Nosing
 Protects and improves the appearance of stair edges.
2120A36
2120A72
2120G36
2120G72
2701SS36
2701SS72
 Provided with screws.
 Provided with drive nails.
 Durable stainless steel is wear and
stain resistant.
 Ribbed top surface and fluted face.
 Finish: BA (Bright Annealed).
 Roll-form product.
 2120A installed.
 Edging
 Covers, protects and provides a neat trim for the edge of linoleum, floor tile and
other similar floor coverings.
 Provided with nails.
2603SS36
2603SS72
2604A36
2604A72
 Smooth finish.
 Provided with screws.
 Provided with screw nails.
 .012 gauge stainless steel.
 Smooth finish.
 Fluted finish.
 Durable stainless steel is wear and
stain resistant.
 .030 gauge stainless steel.
2222S150 (coiled)
 Finish: BA (Bright Annealed).
 Durable stainless steel is wear and
stain resistant.
 Roll-form product.
 Finish: BA (Bright Annealed).
2604G36
2604G72
 2604A installed.
 Roll-form product.
 Edging Corner
 Used to protect and beautify
outside edge corners.
 Durable stainless steel is wear
and stain resistant.
 Provided with
screws.
 Roll-form product.
2808SS60
 2808SS installed (wall application).
 Coves
 2808SS installed (counter application).
 Provides a concave surface for inside corners.
 Gives a smooth appearance and makes cleaning easy.
 Both have a smooth finish.
2408SS60
 Provided with screws.
 2408SS installed.
 Roll-form product.
 Finish: BA (Bright Annealed).
 Durable stainless steel is wear and stain resistant.
PEMKOSALES@PEMKO.COM
2408C72
2408C96
 2408C installed.
 Provided with
screw nails.
WWW.PEMKO.COM
139
 Oak Molding and Trim
 Read each product number according to the following example: 2132W72
– “2132” refers to the part profile number. “W” refers to wood (solid,
unfinished oak). “72” refers to the part length in inches.
 Quality oak creates a warm and beautiful finished look.
 All are drilled with countersunk holes and supplied with brass plated screws.
 Oak Floor Edging
 Oak Reducers
 Covers, protects and provides a neat trim
for the edges of wood, tile, linoleum, or
other surfaces.
 Provides a smooth transition between surfaces.
2604W36
 Covers seams between surfaces of different heights
(such as carpet and linoleum).
2141W36
2604W72
2141W72
 2141W installed.
2142W36
2142W72
2175W36
2175W72
 Oak Seam Binding
 Covers seams between wood, tile, linoleum, or other level surfaces.
 Wider seam binding (2250W, 2300W and 2500W) can also be used as thresholds.
2218W36
2218W72
2250W36
2219W36
2219W72
2250W72
2300W36
2300W72
2500W36
2500W72
 Oak Carpet Trim
 Covers, protects and beautifies carpet edges.
 Also covers seams between two surfaces of
different heights.
2131W36
2132W36
2132W72
VENTURA, CA
PH
140
WHITTIER,
CA
WHITTIER,
WHITTIER,CA
CA
4
2133W36
800 • 283-9988
2131W72
2133W72
 2132W installed.
MEMPHIS, TN
800 • 824-3018
 Edge Facing
 Used to trim and protect edges of counters, work benches, or tables.
 All have a smooth finish.
2070C72
2072C72
 Provided with
screw nails.
 Provided with
screw nails.
2076C72
2076G72
 Provided with
screw nails.
2017SS72
2086SS72
 Provided with screws.
 Provided with screws.
 Roll-form product.
 Roll-form product.
 Durable stainless steel is wear
and stain resistant.
 Durable stainless steel is wear
and stain resistant.
 Finish: BA (Bright Annealed).
 Finish: BA (Bright Annealed).
 Wallboard Molding
 Provides easy alignment, support and a decorative finish to wallboard.
 Gives a smooth appearance and makes cleaning easy.
2084C72
 Provided with
screw nails.
2080C72
2080G72
 Provided with
screw nails.
 2086SS installed.
Finish Designations: (pages 140-141)
C
clear anodized aluminum
G
gold anodized aluminum
SS
mill finish stainless steel
W
wood-solid unfinished oak
Please refer to the listings under each product for stocked
finishes. See page 7 for a complete list of all Pemko
stocked and non-stocked finishes. Consult the factory
for the price and availability of non-stocked finishes.
 Fasteners not included.
3088C63
3088G63
3090C96
3090G96
3092C96
3092G96
3094C96
3094G96
 Tub Molding
 Divider
 Single flange,
inside corner
 Double flange,
inside corner
 3088C installed.
 3090C installed.
PEMKOSALES@PEMKO.COM
 3092C installed.
 3094C installed.
WWW.PEMKO.COM
141
 Caps
 Protects and supports wallboard edges.
 Also used to frame mirrors or to retain carpet / linoleum.
 Fasteners not included (except for the 3102's at 72" and 96"
which are provided with screw nails).
Finish Designations: (pages 142-143)
C
clear anodized aluminum
G
gold anodized aluminum
Please refer to the listings under each product for stocked
finishes. See page 7 for a complete list of all Pemko stocked
and non-stocked finishes. Consult the factory for the price and
availability of non-stocked finishes.
3096C72
3096C96
3096G72
3096G96
3098C72
3098C96
3098G72
3098G96
3100C96
3100G96
3102C72
3102C96
3102G72
3102G96
 3102C installed.
 Cabinet – Door Track
 Used for bypass sliding cabinet doors.
 Provided in pairs (one top track and one bottom track).
 Provided with screws.
 3084C bottom track with glass doors.
3086C72
3086G72
3084C72
3084G72
 3086C top and bottom track.
 HandyShapes™
 Read each product number according to the following example:
2901C72 – “2901” refers to the part profile number. “C” refers
to the part finish. “72” refers to the part length in inches.
 Angles
2897C72
2897C96
2899C72
2899C96
VENTURA, CA
PH
142WHITTIER,
WHITTIER,
CA
WHITTIER,CA
CA
6
2901C72
2901C96
800 • 283-9988
2905C72
2905C96
MEMPHIS, TN
2913C72
2913C96
800 • 824-3018
 Angles
2909C72
2909C96
– Continued
2917C72
2917C96
2921C72
2921C96
2925C72
2925C96
2929C72
2929C96
 Flat Bar
2945C72
2945C96
2957C72
2957C96
2949C72
2949C96
2953C72
2953C96
2959C72
2959C96
2961C72
2961C96
PEMKOSALES@PEMKO.COM
WWW.PEMKO.COM
143
 Round Tube
2969C72
2969C96
2965C72
2965C96
2973C72
2973C96
 Square Tube
2977C72
2977C96
 U-Channel
 Can be used for many applications, including as edging for plywood or particle board.
2933C72
2933C96
 Solid Rod
2937C72
2937C96
2935C72
2935C96
2939C72
2939C96
2979C72
2979C96
2981C72
2981C96
2941C72
2941C96
Finish Designations: (page 144)
C
clear anodized aluminum
Please refer to the listings under each product for stocked
finishes. See page 7 for a complete list of all Pemko stocked
and non-stocked finishes. Consult the factory for the price and
availability of non-stocked finishes.
© Pemko Mfg. Co. 2004
FM2004
VENTURA, CA
PH
144
WHITTIER,
CA
WHITTIER,
WHITTIER,CA
CA
8
800 • 283-9988
MEMPHIS, TN
800 • 824-3018