Features
Melt Pressure Sensor Series
n
No fill material or moving internal parts
n
RoHS compliant for sustainability programs
n
Robust Inconel diaphragm is coated with Dymax®
n
Diaphragm is much thicker with unique sidewall support
n Available
n 0-1,500
with J-type thermocouple temperature output
to 0-10,000 psi pressure range capability
Description
Vertex™ is a Dynisco melt pressure sensor innovation that matches or exceeds
the performance of the traditional sensor. The big differences are that Vertex is
more robust, much faster, and significantly friendlier to the environment.
A new standard in Durability,
Environmental Safety,
and Reliability
The breakthrough technology lies at the tip of the sensor, where melt pressure
is registered directly through a single, more robust diaphragm. Direct measurement eliminates errors that can arise in sensors with complicated internal
structures, transmission fluids and moving push rods. The Vertex diaphragm is
much thicker than those in other sensors and is made of tough Inconel 718
alloy, which provides a higher level of corrosion resistance than stainless steel.
For added protection, the tip is coated with a diamond-hardened DyMax®
coating. The sensor walls have been fortified to handle side stresses. With
all these features, Vertex is the true definition of a robust sensor, proven to
deliver long life and a low cost of ownership.
Vertex design innovation also extends to the speed of response of the sensor.
Faster processes and controls demand faster sensing measurements. Vertex
is many times faster than traditional sensors improving real time production.
Environmental regulations and community conscientiousness are driving
sustainability policies and programs in large and small companies. Waste
stream reduction and longer life cycles are good for the environment and the
budget. Dynisco can assist because Vertex is green, very green. There is no
mercury, no NaK, no oil, no Gallium, no fill material what-so-ever. Vertex is
also RoHS compliant.
Vertex sensors are available with 3.33mV/V or 4-20mA output signals and
designed to work with universal pressure indicators. An optional J-type thermocouple is available to provide a melt temperature signal. Vertex is equipped
with a 1/2-20 UNF for installation in standard transducer mounting holes.
www.Dynisco.com
Dynisco
38 Forge Parkway
Franklin, MA 02038
USA
Hotline
Phone
Fax
Email
1-800-DYNISCO
+1-508-541-9400
+1-508-541-6206
infoinst@Dynisco.com
Dynisco Europe GmbH
Pfaffenstr. 21
74078 Heilbronn
Germany
Phone
Fax
Email
+49-7131-297-0
+49-7131-297-166
dyniscoeurope@Dynisco.com
Specifications
PERFORMANCE CHARACTERISTICS
Input, excitation:
mV/V: 6-12VDC; mA: 16-36VDC
Output, analog:
3.33mV/V or 4-20mA
Accuracy*:±0.25% FS
Electronics Operating Temp, max:
185°F (85°C)
Zero Shift (Electronics temp):0.05%/°F (0.09%/°C)
Span Shift (Electronics temp):0.005%/°F (0.009%/°C
Hex/Transition Temperature (max):
300°F (150°C)
Zero Shift (Hex temperature):
0.005%/°F (0.009%/°C)
Overload Pressure Rating:
1.5x FS
Pressure Ranges (psi):
1.5M, 3M, 5M, 7.5M or 10M
Pressure Units:
PSI, Bar, Kg/cm2, MPa, KPa
Zero Balance Adjustment (±% FS):
mV/V: na; mA: ±20%
Zero Balance Setting (±% FS):
mV/V: 10%; mA: ±3%
Insulation Resistance:
mV/V: 100 MΩ @50VDC;
Internal Shunt Calibration (R-Cal):
80% FSO ±1% FS
MECHANICAL & PACKAGING
Sensor Technology:
Diaphragm Temperature:
Zero Shift (process temp change):
Diaphragm Wetted Parts:
Process Connection:
Electrical Connection:
Mounting Torque:
Temperature Sensor (optional):
Direct sensing
660°F (350°C), max
0.5%/100°F 0.9%/100°C
Inconel 718, DyMax® coated
1/2-20 UNF (with 45˚ conical seat)
Bendix PT02A-10-6P
250 in-lbs recommended,
500 in-lbs max
J-type thermocouple
APPROVALS & CERTIFICATIONS
Marks, Certifications,
Registrations:
CE:
ISO:
Directive 2004/108/EC
ISO9001:2008 production environment
*A
ccuracy is defined as the combined error expressed as a percentage of full scale
output. Combined error includes linearity (BFSL), hysteresis, and repeatability, as
defined in ISA-S37.1.
Ordering Guide
VERT-XXX-XXX-XXX-XXX-XXX-XXX-XXX-XXX-XXX-XXX-XXX
Analog Output
MV3=3.33mV/V
MA4=4-20mA
Compliance Specials
NCC= No Compliance
Certification (CE Included)
Accuracy
MM1= 0.25% accuracy, BFSL
Digital Communications
NDC = No digital communications
Temperature Sensor
NTR =No Thermocouple
or RTD
TCJ =Thermocouple J-type
with 3 inch flex
Unit of Measure
PSI =PSI
BAR= Bar
KG2= Kg/cm2
MPA= MPa
KPA=KPa
Flex Length
NFL = No Flex Length
F18 = 18 inches (45.7 cm)
F30 = 30 inches (76.2 cm)
F48 = 48 inches (121.9 cm)
F72 = 72 inches (182.9 cm)
Pressure Range
R17 = 1500 psi; R20 = 3000 psi;
R21 = 5000 psi;
R22 = 7500 psi; R23 =10000 psi;
100 Bar; 200 Bar; 350 Bar; 500 Bar; 700 Bar; 100 Kg/cm2; 200 Kg/cm2; 350 Kg/cm2; 500 Kg/cm2; 700 Kg/cm2; 10 MPa; 20 MPa; 35 MPa; 50 MPa; 70 MPa; 10000 KPa
20000 KPa
35000 KPa
50000 KPa
70000 KPa
Electrical Connection
6PN = 6 pin connector
Snout Length
S03 = 3 inch (7.6 cm)
S06 = 6 inch (15.2 cm)
S09 = 9 inch (22.9 cm)
Process Connection
UNF= 1/2-20 UNF
VERTEX
2
1.08
27.47mm
ZERO/SPAN SEAL SCREWS NOT PRESENT ON mV/V OUTPUT CONFIGURATIONS
1/2-20 UNF 2A
BENDIX CONN.PT02A-10-6P OR EQUIV.
MATING CONN. PT06A-10- 6S (SR)
Ø
.305
Ø 0
7.80mm
7.75mm
.50
Ø 0
1.50
38.10mm
Ø
A
0.307
0.42
10.69mm
12.70mm
Ø
5/8 HEX
A
Ø
0 .214
( 5.44mm )
1.12
28.58mm
0.470
0.435
11.95mm
11.05mm
45˚ 30'
44˚ 30'
3.75
( 95.3mm )
0.45
( 11.43 mm )
0.414
0.412
10.52mm
10.46mm
RIGID SNOUT LENGTH
7.28 + RIGID SNOUT LENGTH ± 0.25
(6.4mm)
( 185.0mm )
MASTER
KEYWAY
BENDIX CONN.PT02A-10-6P OR EQUIV.
MATING CONN. PT06A-10- 6S (SR)
1.08
27.47mm
ZERO/SPAN SEAL SCREWS NOT PRESENT ON mV/V OUTPUT CONFIGURATIONS
SPAN
1/2-20 UNF 2A
A
0.307
.42
Ø0
.305
Ø 0
10.69mm
B
Ø
A
1.50
38.10mm
Ø
7.80mm
7.75mm
0.50
12.70mm
0.414
ZERO
VIEW A-A
.412
Ø 0
5/8 HEX
A
Ø
10.52mm
10.46mm
0.214
( 5.44mm )
1.12
28.58mm
SST SINGLE BRAID
45˚ 30'
44˚ 30'
0.45
( 11.43mm )
3.75
( 95.3 mm )
UNIT FLEX LENGTH
3.66
( 93.0mm )
0.470
0.435
11.95mm
11.05mm
RIGID SNOUT LENGTH
8.1 + UNIT FLEX LENGTH + RIGID SNOUT LENGTH ± 0.5
( 205.7mm )
(6.4mm)
MASTER
KEYWAY
1.08
27.47mm
ZERO/SPAN SEAL SCREWS NOT PRESENT ON mV/V OUTPUT CONFIGURATIONS
SPAN
1/2-20 UNF 2A
A
0.42
Ø
10.69mm
B
BENDIX CONN.PT02A-10-6P OR EQUIV.
MATING CONN. PT06A-10- 6S (SR)
ZERO
UNIT FLEX LENGTH
A
Ø
7.80mm
7.75mm
5/8 HEX
VIEW A-A
1.50
38.10mm
0.414
.412
Ø0
SST SINGLE BRAID
10.52mm
10.46mm
Ø
A
SST
BRAID
COVER
0.45
( 11.43 mm )
0.307
.305
Ø 0
0.50
Ø
12.70mm
3.75
( 95.3 mm )
STANDARD
MALE
CONN.
T/C FLEX LENGTH
0 .214
( 5.44mm )
1.12
28.58mm
STANDARD
FEMALE
CONN.
3.66
( 93.0mm )
0.470
0.435
11.95mm
11.05mm
45˚ 30'
44˚ 30'
RIGID SNOUT LENGTH
8.1 + UNIT FLEX LENGTH + RIGID SNOUT LENGTH ± 0.5
( 205.7 mm )
(6.4mm)
All dimensions are inches (mm) unless otherwise specified.
©2012 Dynisco. Dynisco reserves the right to MASTER
make changes without notice.
KEYWAY
DDS276087 DOC111612
SPAN
A
B
VERTEX
3