DEEE DD
SECTION 03300
CAST-IN-PLACE CONCRETE
PART 1
1.01
GENERAL
SCOPE OF WORK
A. Work Included:
1.
2.
3.
4.
5.
6.
7.
1.02
All concrete work shown on Drawings.
Reinforcing steel.
Concrete accessories.
Built-in work furnished under other Sections, including setting and placing unless
otherwise specified.
Construction, contraction (control) and expansion joints.
Forming, finishing, curing and patching.
Moisture barrier under interior slabs-on-grade as specified.
RELATED WORK
A. Precast structural concrete - Section 03400.
1.03
CODES AND STANDARDS
A. Conform to the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ACI 318-89, "Building Code Requirements for Reinforced Concrete."
Governing Building Code. Comply with all requirements of the governing building code
that are more stringent than the above-referenced codes, standards and Specifications.
ACI SP-15 (89), Field Reference Manual. A copy of this publication must be kept in the
field office at all times during concrete construction.
ACI 304, Recommended Practice for Measuring, Mixing, Transporting and Placing
Concrete.
ACI 311, Recommended Practice for Concrete Inspection.
ACI 211.1, Recommended Practice for Selecting Proportions for Normal and
Heavyweight Concrete.
ACI 214, Recommended Practice for Evaluation of Compression Test Results of Field
Concrete.
ACI 305, Recommended Practice for Hot Weather Concreting.
ACI 306, Recommended Practice for Cold Weather Concreting.
ACI 308, Recommended Practice for Curing Concrete.
ACI 309, Recommended Practice for Consolidation of Concrete.
AASHTO M 182, Burlap Cloth Made from Jute or Kenaf.
B. All work shall be performed to secure for the entire job homogeneous concrete having required
strength, durability and weathering resistance, without planes of weakness and other structural
defects and free of pronounced honeycombs, air pockets, voids, projections, offsets of plane, and
other defacements on exposed surfaces.
C. Standard Specifications
-
DEEE DD
The "Specifications for Structural Concrete for Buildings" ACI 301-89 are hereby incorporated as
a part of these Specifications and are as much a part of the contract documents as if reproduced
herein. Modifications shall take precedence over items specified in ACI 301 and as incorporated
in Part III are preceded by the relative ACI 301 designation. All ACI 301 items unless so modified
below are incorporated as written. When any part of any item is modified or voided by these
modifications, the unaltered provisions of that part shall apply as written. Copy of ACI 301 shall
be kept in the project field office at all times. No work shall proceed until persons directly
responsible for the project representing the contractors, subcontractors, suppliers and testing
agencies have a copy of this Specification and an understanding of the provisions therein.
PART 2
PRODUCTS
Not used.
PART 3
EXECUTION
Not used.
END OF SECTION
***
-