1
Valve systems ► Valve systems
Valve system, Series AV03
► Qn Max. = 300 l/min ► Multipole ► Electr. connection: D-Sub plug, 25-pin, on the side / D-Sub plug, 44-pin, on
the side
18205
Blocking principle
Combination of double and triple base plate
principles
Working pressure min./max.
-0.9 bar / 10 bar
Control pressure min./max.
3 bar / 8 bar
Ambient temperature min./max.
-10°C / +60°C
Medium temperature min./max.
-10°C / +60°C
Medium
Compressed air
Max. particle size
40 µm
Oil content of compressed air
0 mg/m³ - 5 mg/m³
Protection class
with connection
IP65
Number of valve positionsmax.
24 / 36
Number of solenoid coilsmax.
24 / 40
DC operating voltage
24 V
Voltage tolerance DC
-10% / +10%
Materials:
End plate
Aluminum; Polyamide
Base plate
Polyamide
An example configuration is illustrated. The delivered product may thus deviate from the illustration.
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
■ When using polyurethane tubing, we recommend using additional stiffener sleeves.
■ The combination of double and triple base plates allows a configuration in increments of 1.
■ See the following pages on the series for technical data on individual components.
■ See the Media Centre for information on pin assignment (version A and version B) of the D-Sub connector.
Configurable product
This product is configurable. Please use our Internet configurator at http://www.aventics.com or contact the
nearest AVENTICS sales office.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-09-27, ©AVENTICS S.à r.l., subject to change
2
Valve systems ► Valve systems
Valve system, Series AV03
► Qn Max. = 300 l/min ► Multipole ► Electr. connection: D-Sub plug, 25-pin, on the side / D-Sub plug, 44-pin, on
the side
Dimensions in mm
A
50
52
82
22,9
72
50
10,5
23
12,5
16
12,5
12,5
16,5
6
6
15,9
52
17
25
37,5
B
C
4,3
1)
5
5
4,5
5
9
1
18,8
45
16447
1) Retaining bracket (optional)
A = number of valve positions x 12.5 mm + number of supply plates x 16 mm + 12 mm
B = number of valve positions x 12.5 mm + number of supply plates x 16 mm + 39.5 mm
C = number of valve positions x 12.5 mm + number of supply plates x 16 mm + 25.5 mm
The supply plate in front of the first valve must be taken into consideration in the dimensions.
1 = push-in fitting Ø 4 mm, Ø 6 mm, and Ø 8 mm. Connection angle 1: straight and 90° (exchangeable)
2 and 4 = push-in fitting Ø3 mm. Connection angle: 90°
2 and 4 = push-in fitting Ø 4 mm and Ø 6 mm. Connection angle: straight and 90° (exchangeable)
3 and 5 = push-in fitting Ø8 mm. Connection angle: straight
R = collected exhaust air, push-in fitting Ø 4 mm. Connection angle: straight
X = external pilot, push-in fitting Ø 4 mm. Connection angle: straight
An example configuration is shown. You can calculate the dimensions for your configuration using the formula or read them directly in the configurator.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-09-27, ©AVENTICS S.à r.l., subject to change
3
Valve systems ► Valve systems
Valve system, Series AV03
► Qn Max. = 300 l/min ► Multipole ► Electr. connection: D-Sub plug, 25-pin, on the side / D-Sub plug, 44-pin, on
the side
Dimensions in inches
A
1.97
2.05
2.83
3.27
0.90
0.49
0.91 0.63
0.49
0.49
0.65
0.24
0.24
0.63
2.05
4.13
1.97
0.67
0.98
1.48
B
C
0,17
1)
0.20
0.18
0.20
0.20
0.35
0.04
0.74
1.77
IM0043856
A = number of valve positions x 0.49 inch + number of supply plates x 0.63 inch + 0.47 inch
B = number of valve positions x 0.49 inch + number of supply plates x 0.63 inch + 1.83 inch
C = number of valve positions x 0.49 inch + number of supply plates x 0.63 inch + 1 inch
The supply plate in front of the first valve must be taken into consideration in the dimensions.
1 = push-in fitting 5/32″, 1/4″, and 5/16″. Connection angle 1: straight and 90° (exchangeable)
2 and 4 = push-in fitting 1/8”. Connection angle: 90°
2 and 4 = push-in fitting 5/32″ and 1/4″. Connection angle: straight and 90° (exchangeable)
3 and 5 = push-in fitting 5/16″. Connection angle: straight
R = collected pilot exhaust air, push-in fitting 5/32″. Connection angle: straight
X = external pilot, push-in fitting 5/32″. Connection angle: straight
An example configuration is illustrated. The delivered product may thus deviate from the illustration.
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-09-27, ©AVENTICS S.à r.l., subject to change
4
Valve systems ► Valve systems
Valve system, Series AV03
► Qn Max. = 300 l/min ► Multipole ► Electr. connection: D-Sub plug, 25-pin, on the side / D-Sub plug, 44-pin, on
the side
Multipole plug (25-pin), cable identification as per DIN 47100
13
1
14
25
1
13
14
25
00136701
00137724
Socket (female)
Pin
Color
Pin
Color
Plug (male)
1
2
3
4
5
6
7
8
9
10
11
12
13
white
brown
green
yellow
gray
pink
blue
red
black
violet
gray/pink
red/blue
white/
green
14
15
brown/
green
white/
yellow
17
18
19
yellow/ white/gray
brown
16
gray/
brown
white/pink
21
22
23
24
25
pink/ white/blue
brown
20
brown/
blue
white/red
brown/red
white/
black
Multipole plug (44-pin), cable identification as per DIN 47100
15
15
30
1
14 13
29
44 43
12 11
28
42
10
9
8
27 26
25
24 23
41
40 39
38
7
6
22
37
5
4
3
2
1
1
15
1
16
2
17
21
20 19
18
17 16
36 35
34
33 32
31
31
31
31
44
3
4
18 19
32 33
5
6
20 21
34 35
7
8
22 23 24
36 37
38
9
10
11 12
25 26
27
39 40
13 14 15
28
41 42
29 30
43 44
44
00137727
00137727_a
Socket (female)
Pin
Color
Pin
Color
Pin
Color
Pin
Color
Plug (male)
1
2
3
4
5
6
7
8
9
10
11
12
13
white
brown
green
yellow
gray
pink
blue
red
black
violet
gray/pink
red/blue
white/
green
14
15
brown/
green
white/
yellow
17
18
19
yellow/ white/gray
brown
16
gray/
brown
white/pink
21
22
23
24
25
pink/ white/blue
brown
20
brown/
blue
white/red
brown/red
white/
black
26
27
28
29
30
31
32
brown/
black
gray/
green
yellow/
gray
pink/
green
yellow/
pink
green/
blue
yellow/
blue
34
35
36
37
green/red yellow/red
33
green/
black
yellow/
black
gray/blue
38
39
40
41
42
43
44
pink/blue
gray/red
pink/red
gray/black
pink/black
blue/black
red/black
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-09-27, ©AVENTICS S.à r.l., subject to change