Plug Load Control Solutions
Smart Solutions for California Title 24 2013
and ASHRAE 90.1 2010 Compliance
Receptacle Control Solutions
Automatic Shutoff Controls for Plug Loads and Lighting
One simple strategy to keep lights off when they are not needed involves Receptacle Control
(also known as Plug Load Control), which automatically turns off plug loads to lighting and
other unnecessary electronic devices when the space is vacated.
What are Plug Loads?
Plug loads include all devices that plug into a standard electrical
outlet. Plug load control refines energy-saving efforts by
automatically discontinuing power to designated plug loads
when a space has been vacated. Plug load control also includes
preventing “standby” or “vampire” loads, which can waste energy
by continuing to draw electricity when the device appears to
be OFF. Products not in use or on standby account for as much
as 25 percent of total electrical consumption in commercial
buildings. Examples include task lighting, computers, monitors,
cell phone chargers, A/V equipment, and other electronic
devices that can be switched OFF at night without causing
harmful consequences.
Title 24 2013 require controlled receptacles to have the same
automatic shutoff function as lighting using either occupancy
sensing or schedule based control. Plug-in strips and devices
cannot be used for code compliance. Title 24 and NEC also
require the controlled receptacles to be permanently marked to
differentiate them from uncontrolled receptacles.
Interpreting the Codes and Standards
Schedule Based Receptacle Control
Energy codes and standards now require Receptacle Control or
Plug Load Control. Both ASHRAE 90.1-2010 and California
Controls that allow the user to set the time of day
that a circuit will be energized and de-energized.
Receptacle Control Strategies
Occupancy Sensing Based Receptacle Control
Controls that monitor a space’s state of occupancy and will
energize and de-energize a controlled receptacle
based on occupancy.
3
Interpreting the Codes and Standards
ASHRAE 90.1-2010
Automatic Receptacle Control
• At least 50% of all receptacles in private offices, open office areas (including modular partition receptacles) and computer
classrooms must be controlled by an automatic control device:
- An occupancy sensor that will turn receptacles OFF
within 30 minutes of all occupants leaving a space
- A scheduled basis using a time-of-day operated control
device that turns receptacles OFF at specific programmed times
• Plug-in strips and devices cannot be used for compliance - the receptacle must be controlled
4
California Title 24 2013 Section 130.5
Electrical Power Distribution Systems
– Circuit Controls for 120 VAC Receptacles
• Both controlled and uncontrolled 120V receptacles shall be provided in each private office, open office area, reception lobby,
conference room, kitchenette in office spaces, and copy room
- Electric circuits serving controlled receptacles must be equipped with automatic shutoff controls such as occupancy sensors or an automatic time switch
- At least one controlled receptacle must be installed within 6 feet of each uncontrolled receptacle. Alternatively, a split duplex receptacle with one controlled and one uncontrolled receptacle can be installed
- Controlled receptacles must have a permanent marking to differentiate them from uncontrolled receptacles
• Hotel and motel guest rooms require at least 50 percent of receptacles to be auto off via an occupancy sensor, captive key
switch, or automatic control so they are OFF within 30 minutes of vacancy
• Plug-in strips and devices cannot be used for compliance
5
Occupancy Sensing Based Receptacle Control
Integrated Receptacle and Lighting Control
This solution utilizes a common occupancy sensor to provide control of both lighting and plug loads. The versatile Leviton OPP20-0D2
Power Pack enables Manual-ON local control using a standard momentary or maintained single-pole wall switch.
Receptacle and Lighting Control with OPP20 Super Duty Power Pack
• OPP20 models support plug load control, switched daylighting, sensing control, and bi-level switching
• UL/cUL 916 Listed for Energy Management
• Exclusive self-detect configurable local switch input
• Robust and reliable with mechanical latching relays and industry-exclusive “fail-safe” design
• General purpose rating exceeds UL-20 requirements
Recommended Solutions
Description
Cat No.
OPP20-0D2: Super Duty Power Pack with Auto-ON,
Manual-ON, and Local Switch Inputs, Title 24
OPP20-0D2
OPP20-RD4:Super Duty Power Pack with Auto-ON,
Manual-ON, Local Switch, and Photocell Input, Title 24
OPP20-RD4
Ceiling-Mount Multi-Technology Occupancy Sensor
Ceiling-Mount Ultrasonic Occupancy Sensor
Ceiling-Mount PIR Occupancy Sensor
OSC05-MOW, OSC10-MOW, OSC20-MOW
OSC010-MOW, OSC05-UOW, OSC10-UOW
OSC20-UOW
OSC020-MOW, OSC04-IOW, OSC15-IOW
Ceiling-Mount Multi-Technology Occupancy Sensor with Isolated Relay OSC05-RMW, OSC10-RMW, OSC20-RMW
OSC010-RMW, OSC05-RUW, OSC10-RUW
Ceiling-Mount Ultrasonic Occupancy Sensor with Isolated Relay
OSC20-RUW
Ceiling-Mount PIR Occupancy Sensor with Isolated Relay
OSC020-RMW, OSC04-RIW, OSC15-RIW
Wall Mount Multi-Technology Occupancy Sensor
OSW12-M0W
Wall Mount Multi-Technology Occupancy Sensor with Isolated Relay
OSW12-RMW
Wide-View Wall Mount PIR Occupancy Sensor
OSWWV-I0W
Wide-View Wall Mount PIR Occupancy Sensor with Isolated Relay
OSWWV-RIW
Long-Range Wall Mount PIR Occupancy Sensor
OSWLR-I0W
Long-Range Wall Mount PIR Occupancy Sensor with Isolated Relay
OSWLR-RIW
Receptacle or Wallplate, marked
See page 10 for ordering information
Visit Leviton.com/sensors for more information and to see the full line of sensing solutions.
Switch
OPP20 Power Pack
Controlled Receptacles
Occupancy Sensor
6
Wireless Occupancy Sensing Control
Easy Retrofit with No Additional Control Wiring
Receptacle and Lighting Control with LevNet RF™ Receptacle
• Receptacle models include split and duplex with wireless ON/OFF control of lamps, electronic devices, and appliances
• Sensor models are self-powered and wireless , using zero power for zero utility cost and making it easy to install with little
to no interruption to operations -- ideal for retrofits
Recommended Solutions
Description
Cat No.
LevNet RF Split Duplex TR Receptacle
Controlled Side: 1800W, 1800VA, 1/2HP, 120V; Receptacle: NEMA 5-15R
WSG15-0DZ
LevNet RF Duplex TR Receptacle for Dual Controlled Outlet.
Controlled Side:1800W, 1800VA, 1/2HP, 120V
WSG15-TDZ
LevNet RF 902MHz Wireless Self-Powered PIR Occupancy Sensor, low profile,
surface mount, 1,200 sq ft
WSC12-M9N
LevNet RF Wall Switch Receiver
WSS20-N9N
LevNet RF Wall Switch Receiver, Non-Neutral
WSS20-G9N
Visit Leviton.com/levnetrf for more information and to see the full line of self-powered wireless control solutions.
LevNet RF
Wall Switch Receiver
Wireless
Control
Signal
Up to 150 ft.
Wireless Occupancy Sensor
LevNet RF
Controlled Receptacles
7
Schedule Based Receptacle Control
Schedule Plug Load Control Based on Time of Day
Receptacle and Lighting Control with EZ-MAX® Plus Stand-Alone Relay System
• Compact design engineered to be contractor friendly, quick to install, and simple to configure
• Built-in astronomical time clock and scheduler
• Easy programming configurations
• Integrates low voltage inputs such as occupancy sensors and photocells
Recommended Solutions
Description
Cat No.
EZ-MAX Plus 8 Relay Panel, (8) 1-Pole 30A 120V/277V Relays. 120V, 277V, 347V
input power. With 8 Low Voltage Inputs
R08BD-L08
EZ-MAX Plus 8 Relay Panel, (8) 2-Pole 20A 240V/480V Relays. 120V, 277V, 347V
input power. With 8 Low Voltage Inputs
R08BD-208
EZ-MAX Plus 24 Relay Panel, (24) 1-Pole 30A 120V/277V Relays. 120V, 277V, 347V
input power. With 12 Low Voltage Inputs
R24BD-L24
EZ-MAX Plus 24 Relay Panel, (24) 2-Pole 20A 240V/480V Relays. 120V, 277V, 347V
input power. With 12 Low Voltage Inputs
R24BD-224
EZ-MAX Plus 8 Relay Panel, (8) 1-Pole 30A 120V/230V/277V Relays. 230V input
power. With 8 Low Voltage Inputs
R08BF-L08
Receptacle or Wallplate, marked
See page 10
for ordering
information
CONTROLLED RECEPTACLES
LIGHTING LOADS
*
8
Recommended Solutions... Continued
Description
Cat No.
Ceiling-Mount Multi-Technology Occupancy Sensor
OSC05-MOW, OSC10-MOW, OSC20-MOW
Ceiling-Mount Ultrasonic Occupancy Sensor
OSC010-MOW, OSC05-UOW, OSC10-UOW
OSC20-UOW
Ceiling-Mount PIR Occupancy Sensor
OSC020-MOW, OSC04-IOW, OSC15-IOW
Ceiling-Mount Multi-Technology Occupancy Sensor with Isolated Relay OSC05-RMW, OSC10-RMW, OSC20-RMW
Ceiling-Mount Ultrasonic Occupancy Sensor with Isolated Relay
OSC010-RMW, OSC05-RUW, OSC10-RUW
OSC20-RUW
Ceiling-Mount PIR Occupancy Sensor with Isolated Relay
OSC020-RMW, OSC04-RIW, OSC15-RIW
Wall Mount Multi-Technology Occupancy Sensor
OSW12-M0W
Wall Mount Multi-Technology Occupancy Sensor with Isolated Relay
OSW12-RMW
Wide-View Wall Mount PIR Occupancy Sensor
OSWWV-I0W
Wide-View Wall Mount PIR Occupancy Sensor with Isolated Relay
OSWWV-RIW
Long-Range Wall Mount PIR Occupancy Sensor
OSWLR-I0W
Long-Range Wall Mount PIR Occupancy Sensor with Isolated Relay
OSWLR-RIW
Description
Cat No.
Photocell, clear lens, 0-70fc sensing range
ODC0P-00W
Switching Photocell, clear lens, 1-750fc sensing range
ODC0P-S0W
Indoor Photocell, fresnel lens, 50-750fc sensing range
PCIND-000
Indoor Photocell, diffuse lens, 0-300fc sensing range
PCIND-0SV
Outdoor Photocell, clear hood lens, 50-750fc sensing range
PCOUT-000
Outdoor Photocell, diffuse lens, 0-300fc sensing range
PCOUT-0SV
Atrium Photocell, dome/frost lens, 200-2500fc sensing range
PCATR-000
Skylight Photocell, dome/frost lens, 1000-7500fc sensing range
PCSKY-000
Description
Cat No.
Low Voltage Switch, White
00LVS-xxW*
* xx = 01, 02, 03, 04, 05, 06, 08, or 10 Button Low Voltage Switch
9
Controlled Receptacle Identification
To meet the requirements for identifying receptacles that will be automatically de-energized as part
of an overall plug load control program, Leviton offers two compliant solutions:
Wallplate Decals
For the most economical retrofit application, these decals allow you to mark existing receptacle wallplates
with the required symbol, and the word “CONTROLLED” (optional) for easy identification. Decals use a
UL-approved material for marking and labeling.
Imprinted Receptacles
For new construction and renovation applications, custom imprinting directly on the receptacle is available for
our most popular specification grade receptacles, in both standard and Decora® platforms.
Wallplate Decals
70 decals/pk. Cat No: CRLAB
Imprinted Receptacles
Receptacle Ordering Information
Fed Spec
Standard
Tamper Resistant
Decora
Standard
15A
20A
15A
20A
15A
20A
15A
20A
One outlet
controlled
5262-S1x
5362-S1x
5262-1Px
5362-1Px
16252-1Px
16352-1Px
CR015-1Px
CR020-1Px
Two outlets
controlled
5262-S2x
5362-S2x
5262-2Px
5362-2Px
16252-2Px
16352-2Px
CR015-2Px
CR020-2Px
Where “x” = color code; standard Leviton colors apply
10
Commercial Spec Grade
Assistance and Services
Smart Service – Sustainable Technology
Design Guides and Cookbooks - We offer
examples of recommended energy code compliant
solutions for typical commercial applications. Visit
ashrae.leviton.com and title24.leviton.com and search
by Application. For additional assistance, contact your
local Leviton representative.
Leviton Customer Services
Phone / Email Support
Leviton Corporate Customer Service
1-800-323-8920 Monday to Friday 8am – 7pm EST
• Fax: 1-800-832-9538
• Email: Customerservice@leviton.com
Leviton Technical Services
Phone / Email Support
Cross Reference Tool on www.leviton.com
Leviton Corporate Techline 1-800-824-3005
Monday to Friday 8am – 7pm EST info@leviton.com
Simply type the part number into the search box on the
home page and matches will be displayed on the Manufacturer
Cross Reference tab
Lighting & Energy Solutions Techline 1-800-959-6004,
Monday to Friday 9am - 8pm EST
LEStechsupport@leviton.com
Live Chat
Online Knowledgebase: Communities.leviton.com
Obtain product related information from industry professionals
and DIY homeowners on a wide range of products and services
Communicate online with Leviton’s technical service representatives about application and product-related questions.
Corporate Technical Support – Monday to Friday 9am -7pm EST
Other Helpful Links
Dollars & Sensors® Online Energy Audit Tool - Makes energy
audits easier than ever - use your smart device (Android, Apple,
Windows or Blackberry) to enter audit information and your
desktop to generate ROI reports, analyses, Bill of Materials,
and a submittal package - go to
www.leviton.com/dollarsandsensors
ez-Learn™ – Get Leviton smart from the comfort of your home
or office with this exclusive 24/7 online training – go to
www.leviton.com/ezlearn
Occupancy sensor layout services – Have a team of experts
create occupancy sensor layouts directly on your CAD drawings,
complete with a List of Equipment at no cost – go to
portal.leviton.com
www.leviton.com/LESproducts - Find high-quality,
cost-effective, easy-to-implement lighting control solutions
for any application
LightLogger® Program – Get an accurate estimate of your
energy-savings potential with this exclusive payback analysis
tool – go to www.leviton.com/logger
www.leviton.com/LESdesign - Save time and energy in the
design process by utilizing our no cost design tools.
www.leviton.com/LESlibrary - Find all lighting and energy
product documentation and software in one centralized location
to make it easier to get the information you are looking for
www.leviton.com/BIM - Incorporate Leviton connectivity
images and added intelligence into your infrastructure
design drawings with our library of free BIM objects
11
Leviton Manufacturing Co., Inc Global Headquarters
201 N Service Rd, Melville, NY 11747
Tel. 1-800-323-8920, FAX: 1-800-832-9538
Tech Line: (8:30AM-7:00PM E.T. Monday-Friday) 1-800-824-3005
Visit our website at: www.leviton.com/receptaclecontrol
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062
Tel. 800-736-6682 fax 503-404-5594
Tech Line (6:00AM-4:00PM PT Monday-Friday) 800-959-6004
©2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
G-9303/114-ds