the test equipment answer
888.902.6111
intellirentco.com
the test equipment answer
Anyone can “rent” you a piece of equipment, but can they do it the intellirent way; pre-selection
of the right equipment, in-stock, delivered on time & field ready, with application support?
intellirent can.
■■
We rent electrical test and measurement equipment from Doble, Dranetz, Fluke, High Voltage, HV Diagnostics,
Manta, Megger, Omicron, Raytech, Vanguard and many more.
■■
Thorough understanding of field applications.
■■
Equipment consultations before you rent to ensure you get the appropriate test equipment for your application.
■■
Delivered field ready and complete with manuals, test leads, charged batteries, even laptop and software set up if
required.
■■
Our equipment is tested in real world conditions as part of the intellirent conditioning and pre-shipment program.
■■
Worldwide logistics and transportation.
Table of Contents
Power Analysis and Data Acquisition
2
Relay and Protection Test Equipment
12
Transformer Test and Diagnostic Equipment
18
Switchgear and Circuit Breaker Test Equipment
30
Cable and Bus Test Equipment
54
Battery Test Equipment
66
Ground Test Equipment
68
Meters and Meter Test Equipment
70
Inspection Equipment
78
Motor and Rotating Apparatus Test Equipment
84
Electrical Safety and Hospital Test Equipment
86
Process Calibration Equipment
88
Index by Application
94
Index by Manufacturer
96
contact information
604 Henrietta Creek
Suite 400
Roanoke, TX 76262
T 888.902.6111
T 972.317.0479
F 817.491.0068
intellirentco.com
info@intellirentco.com
Power Analysis/Data Acquisition
Fluke 1750
Power Quality Analyzer
■■
Quick Communications and Configuration Using Bluetooth Enabled Device
Provided by Intellirent
■■
Threshold Free Setup – Apply Thresholds After Monitoring Is Complete Using
Fluke’s Intuitive Power Analyze Software
■■
Five Voltage and Five Current Inputs Enable Separate Ground and Neutral
Motoring
■■
Data is Recorded to Internal Flash Memory With 1GB of Storage Capacity
■■
Monitors All Power, Energy, Distortion and Power Quality Parameters with
Harmonic Measurement to The 50th Order
■■
Provided by Intellirent with Appropriately Ranged Current Probes
(Pictured Below)
Fluke 1750
Power Quality Analyzer
Fluke Current Probes
■■
Intellirent Provides a Comprehensive Selection of Current Probes for Use
with Fluke Power Quality Analyzers. Current Probes to Support Your
Specific Application are Included with the Selected Power Quality Analyzer.
■■
Fluke 3005D
Rigid Probe with 3/4” Jaw Opening
.01 – 5A Range
1% RDG ± 0.5% FS Accuracy
■■
Fluke 3014
Rigid Probe 3/4” Jaw Opening
0.1 – 40A Range
1% RDG ± 0.5% FS Accuracy
■■
Fluke 3110
Flexible Probe, 24”
2-100A Range
1% RDG ± 0.15% FS Accuracy
■■
Fluke 3210
Flexible Probe, 24”
20-1000A Range
1% RDG ± 0.15% FS Accuracy
■■
Fluke 3310
Flexible Probe, 24”
100-5000A Range
1% RDG ± 0.15% FS Accuracy
Fluke Current Probes
2
888.902.6111
■
www.intellirentco.com
Dranetz PX5
Power Quality Analyer
■■
High Speed Monitoring, Data and Waveform Capture, up to 1
Microsecond/Channel, of All Power, Energy, Distortion and Power Quality
parameters
■■
Simple Setup and Configuration Through Touchscreen Interface
■■
Automatic or Wizard Configuration
■■
Automatic Circuit Type Verification to Minimize Erroneous Data Recording
Sessions
■■
Comprehensive Control of Thresholds, Triggers and Monitoring Parameters
■■
Powerful Reporting Software, DranView Professional or DranView
Enterprise, for In Depth and Comprehensive Reporting and Analysis
■■
Current Ranges From .01 to 6000A with Available Current Probes
(Pictured Below)
■■
Dranetz PX4-400 model Extends Frequency Measurement Range to 400 Hz
Dranetz PX5
Power Quality Analyzer
Dranetz Current Probes
■■
Intellirent Offers a Comprehensive Selection of Current Probes for Use with
the Dranetz PX5. Current Probes to Support Your Specific Application are
Included With Your Rental.
■■
Dranetz TR-2510
0.01-10A (3/4” Jaw)
Rigid Current Probe
■■
Dranetz 6000XL36
600/6000A
36” Flexible Current Probe
■■
Dranetz TR-2500
1-500A
Rigid Current Probe (1 3/16” Jaw)
■■
Dranetz 6000XL48
600/6000A
48” Flexible Current Probe
■■
Dranetz 3000XL24
300/3000A
24” Flexible Current Probe
■■
■■
Dranetz 3000XL36
300/3000A
36” Flexible Current Probe
Proflex ACP 3000 Tridra
300/3000A
24” Three Phase Flexible Current
Probe
■■
Dranetz 3000XL48
300/3000A
48” Flexible Current Probe
■■
Dranetz 6000XL24
600/6000A
24” Flexible Current Probe
Dranetz Current Probes
the test equipment answer
3
Power Analysis/Data Acquisition
AEMC 8335
Power Quality Analyzer
■■
Hand-Held Monitoring, Data and Waveform Capture for AC or DC Circuits up
to 256 Samples/Cycle
■■
Large Color Display Includes Direct Access to Waveforms, Transients,
Harmonic Bar Graphs, Events, Trend Recordings, and Power Statistics
■■
Large 2GB Removable Memory Card Enables Extended Recordings of Any
Power Parameter, Harmonics, Transients, Waveform Distortion, Crest Factors,
Transformer K Factor, Flicker and Phase Unbalance
■■
Backup Battery Life of 8 Hours
■■
Available With a Wide Selection of Current Probes, From 1A (Rigid) up to
6500A (Flexible)
AEMC 8335
Power Quality Analyzer
AEMC 3945
Power Quality Analyzer
■■
Hand-Held Monitoring, Data and Waveform Capture for AC or DC Circuits up
to 256 Samples/Cycle
■■
Large Color Display Includes Direct Access to Waveforms, Transients,
Harmonic Bar Graphs, Events, Trend Recordings, and Power Statistics
■■
Provided With DataView Software for Simple Report Generation
■■
Available With a Wide Selection of Current Probes, from 240A (Rigid) up to
6500A (Flexible)
AEMC 3945
Power Quality Analyzer
4
888.902.6111
■
www.intellirentco.com
Amprobe Dm-III MultiTest
Power Quality Analyzer
■■
Measures and Records Three Phase Power, Energy, Power Quality and
Harmonics
■■
Measures Voltage to 600V, Current to 3000A with Included 3000A Flexible
Current Probe, Peak Demand, Frequency and Power Factor
■■
Event Sampling Includes Sags, Surges, Harmonics (THD and Individual to
49th) Calculates kW, VAR, VA, and kWh
■■
Readings can be Viewed During the Recording, After the Recording is
Complete on the LCD or After Downloading Into the Included Download
Suite Software
■■
Charting and Exporting Recorded Results Is Simple and Convenient
■■
No Software Key or Registration Required
■■
Optional .5-100A Current Range with Rigid Current Probes (Picture Below)
■■
Battery Backup Records for Six Hours
■■
Includes Phase Sequence Indicator, Ground Tester, and 1kV Megohmmeter
■■
USB Communications Facilitates Simplified Download
■■
Provided by Intellirent with Download Suite Software for Graph and Table
Generator or Export to MS Excel
Amprobe Dm-III MultiTest
Power Quality Analyzer
Amprobe Current Probes For DM-II Plus and Amprobe DM-III
Model
Range
Amprobe DMCT
5-1000A Current Probe for Dm-II Pro or DM-III
Amprobe Flex33
30-3000A Flexible Current Probe for DM-III
Amprobe ACF-3000-DMA
Dual Range, 300 or 3000A for DM-II Pro
Amprobe DMCT100
.1-100A Current Probe for Dm-III
Amprobe Current Probes
Amprobe DM-II Plus
Power Recorder
■■
Measures and Records Power Three Phase Power and Energy
■■
Measures Voltage to 600V, Current to 1000A With Included 1000A Rigid
Current Probes and Power Factor
■■
Calculates kW, VAR, VA, and kWh
■■
User Selectable Sample Rate Permits Recording Periods from Hours to
Months
■■
Readings can be Viewed During the Recording, After the Recording is
Complete on the LCD or After Downloading Into the Included Download
Suite Software
■■
Charting and Exporting Recording Results Is Simple and Convenient
■■
Optional 3000A Current Range with Flexible Current Probes
Amprobe DM-II Plus
Power Quality Analyzer
the test equipment answer
5
Power Analysis/Data Acquisition
Astromed DASH8xpm
Power Analyzer and Data Acquisition System
Astromed DASH8xpm
Power Analyzer and
Data Acquisition System
■■
Comprehensive Recording of All Parameters
■■
15 inch Touch Screen Display
■■
Real Time Calculations, Continuous Recording and Event Logging
■■
Sample Rates From Once Per Minute to 200,000 Per Second Per Channel
■■
Logged Events for Voltage Include Interrupt, Sag, Swell, Transient, Frequency,
THD, Individual Harmonics/Interharmonics and Unbalance
■■
Logged Events for Current Include Transient, RMS Thresholds, THD, Individual
Harmonics/Interharmonics and Unbalance
■■
Logged Events for Power Include PF, kVA, kW and kVAR
■■
Optimal for Generator Load Step Tests or UPS Commissioning
■■
Provided by Intellirent With AstroView X Software and Preconfigured Laptop
Computer if Desired
Astromed Modules
Astromed Modules
6
Module
Type
Signal
Range
HDV1
Non-Isolated Differential Input Module
+/- 5V (10V FS w/ 0 Offset)
IHV1
Isolated Single End Voltage Module
250V AC/DC
IBR1
Isolated Bridge Input Module
+/- 2V
IHV2
Isolated Single End Higher Voltage Module
600V AC/DC
ITCU
Universal Therocouple Input Module
J, K. E, T, N, B, R or S
IHV3
Isolated Single End Higher Voltage Module
250V AC/DC
888.902.6111
■
www.intellirentco.com
Astromed DASH 8xe
8 Channel Universal Data Acquisition System
■■
Portable and Lightweight (22 Lbs)
■■
15” Touch Screen Display
■■
Real Time Signal Testing Including Window, Slope/Level and Event
■■
Sample Rates from Once Per Minute to 200,000 Per Second Per Channel
■■
Single Ended Voltage Monitoring with a Max Measuring Voltage of 600V
RMS with IHV2 Module
■■
Differential Voltage Recording with a Max Measuring Voltage of 2 to 4
VFS with IBR1 Module
■■
Type J, K, T, E and N Thermocouple Measurements
■■
RTD Measurements
■■
Optional Onboard Thermal Printer
■■
Provided by Intellirent with AstroView Software
Astromed DASH 8xe
8 Channel Universal Data
Acquisition System
Astromed DASH 18X
18 Channel Universal Data Acquisition System
■■
Portable and Lightweight (27 Lbs)
■■
17” Touch Screen Display
■■
Real Time Signal Testing Including Window, Slope/Level and Event
■■
Sample Rates From Once Per Minute to 200,000 Per Second Per Channel
■■
Video Snapshot Recording Rates up to 1 Frame Per Second
■■
Single Ended Voltage Monitoring with Maximum Input of 250V AC or DC
■■
Differential Voltage Recording with a Maximum Input of ±40Volts
■■
Bridge Measurement with a Max Input Voltage of ±40Volts Differential
■■
Type J, K, T, E and N Thermocouple Measurements
■■
Onboard 73GB Harddrive
■■
Optional Onboard Thermal Printer
■■
Provided by Intellirent with AstroView Software
Astromed DASH 18X
18 Channel Universal Data
Acquisition System
Universal Current Probes
■■
AC or DC Rigid and Flexible Current Probes with mV or mA Outputs for
Data Acquisition or Meter Applications
Model
Range
AEMC MN103
1mA – 10A AC, 1A-100A AC, mV Ouput
AEMC MN254
0.1A to 240A (Duane Range), mV Output
AEMC SL201
50mA – 150A AC or 50mA to 150A DC, mV Otuput
AEMC MR410
1A-400A AC or 600A DC, mV Output
Amprobe CT600
0.1-600A AC or DC, mV Output
AEMC MR521
0.2 to 1000A AC or 0.5 to 1500A DC, mV Output
AEMC SR600
0.1A to 1200A AC, mA Output
AEMC JM865A
1A to 3600A AC, mA Ouptut
Fluke i2000 Flex
Flexible, 0.2 to 2000A AC, mV Output
Universal Current Probes
the test equipment answer
7
Power Analysis/Data Acquisition
Fluke 2686
Universal Data Acquisition System
Fluke 2686 Universal
Data Acquisition System
■■
Provided by Intellirent as a Complete System with A Fluke DAQ
Pre-Configured Laptop Computer, Appropriate Input Modules and
Networking Configuration Components
■■
Prewired with Input Signal Leads as Required
■■
Measure up to 120 Signals Per Unit or 720 Signals by Combining 2686 Units
■■
Sampling Rate Adjustable from 1000 Readings/Second to 1 Reading/Hour
■■
Measure AC or DC Voltage, Resistance, Frequency, RTD and Thermocouples,
Thermistor and Current (including 4..20 loops)
■■
Simple Configuration and Setup
Fluke 2686
Universal Data Acquisition System
■■
Data Acquisition Systems from Intellirent can be Configured for
Measurement of:
Current
Voltage
Resistance
Frequency
Phase Angle
Power Factor
Temperature (RTD and TC)
Pressure
Flow (Liquid or Gas)
Vibration
RPM
Sound Level
Light Level
Data Acquisition System
Inputs and Sensors
8
888.902.6111
■
www.intellirentco.com
Fluke 434 and 435
Three Phase Power Quality Analyzer
■■
Measure Three Phases with Neutral at 200 kS/s on Each Channel
Simultaneously
■■
Available From Intellirent with a Wide Variety of Current Probes from 5A for
Monitoring Secondaries to 5000A Flexible Current Probes (Picture Above)
■■
Measure and Record:
Voltage (AC and DC) to 1000V
Current (AC and DC) to 5000A
Peak Voltage and Peak Current
Crest Factor
Frequency
Dips and Swells
Harmonics
Power and Energy
Flicker
Unbalance
■■
Internal Memory Records 5 Readings/Second Continuously Per Channel
■■
Records up to 1800 Min/Max and Average Points for Each Reading
■■
Provided by Intellirent with FlukeView Software
■■
Interharmoics, Advanced Energy, Transient and Inrush are Available on Fluke
435 Model
Fluke 434 and 435
Three Phase Power
Quality Analyzer
Fluke 43B
Single Phase Power Quality Analyzer
■■
Measure and Trend Single Phase Voltage to 1kV, Current to 3000A,
Frequency, Power Harmonics, Voltage Sags, Transients and Current Inrush
■■
Record Two Selectable Parameters for up to 16 Days
■■
Internal Measurement of 20 Parameters
■■
Provided by Intellirent FlukeView Software
Fluke 43B
Single Phase Power
Quality Analyzer
Fluke 124 and 125
Dual Input 40 MHz Oscilloscope
■■
Measure Current to 400A and Voltage to 1kV at 40 MHz
■■
High Resolution Monochrome Display
■■
Sample Rate of 25 MS/s
■■
Divisions of 5mV – 500V
■■
Scope Record Mode will Record 512 min/max Points Per Input
■■
Internal Memory of up to 20 Screens and Setups
■■
Provided by Intellirent with FlukeView Scopemeter Software
Fluke 124 and 125
Dual Input 40 MHz Oscilloscope
the test equipment answer
9
Power Analysis/Data Acquisition
Manta MTS-1030
Multifunction Power Meter and Timer
Manta MTS-1030
Multifunction Power
Meter and Timer
■■
Ten Simultaneous Measurements of Frequency, Phase Angle, AC/DC Voltage,
AC Current (200A Max), Power Factor, Watts, and VARS.
■■
On Board Timer Measures Cycles or Seconds Based on State or Contact
Changes
■■
Lightweight and Simple to Operate
■■
Phasor Display of AC Values
■■
Battery or Line Powered
Megger PMM-1
Universal Power Meter
■■
Light Weight (13 Lbs) and Simple to Use with Intuitive Controls
■■
Battery or Line Operated
■■
Measure Voltage, Current (100A Directly or Higher With Optional CTs), Phase
Angle, Power, Reactive Power, Frequency, Harmonics, and Time (Seconds or
Cycles)
■■
Onboard Datalogger Records Events
■■
Displays Three Phase Voltage, Current, Phase Angle, Power, Reactive Power,
Power Factor, and Frequency Simultaneously.
■■
Variable PT and CT Ratios for Display of Primary Values
Megger PMM-1
Universal Power Meter
Sensorlink 6-920
High Voltage Recording Ammeter
■■
Provided With Three Open Sensor CTs
■■
Suitable For Use On 69kV Systems
■■
Sensor Opening of 1.3”
■■
+/-1% Accuracy to 1000A
■■
Provided With Softlink Software and IrDA Communications Cable
Sensorlink 6-920
High Voltage
Recording Ammeter
10
888.902.6111
■
www.intellirentco.com
Fluke 196
Dual Input 100MHz Oscilloscope
■■
Measure Current to 4000A and Voltage to 1kV at 200 MHz
■■
High Resolution Color Display
■■
Sample Rate of 1 GS/s
■■
Divisions of 2mV – 100V
■■
ScopeRecord Mode will Record 27,500 Points Per Input
■■
Internal Memory of up to 15 Screens and Setups
■■
Provided by Intellirent with FlukeView Scopemeter Software
Fluke 196
Dual Input 100MHz Oscilloscope
Amprobe PRM2
Phase Sequence Indicator
■■
Small and Lightweight (less than 1 Lb)
■■
Capable of Operation from 100 to 600V with a Frequency Range
from 45 to 65 Hz
■■
Powered by Circuit Under Test
Amprobe PRM2
Phase Sequence Indicator
Ohmic BET300AD (L)
Biomedical Electrical Safety Test Set
■■
Tests Electrical Equipment and Medical Instruments To AAMI, UL and NFPA
Codes
■■
Measures Leakage Current, Voltage and Resistance
■■
Insulation Tests to 100V
■■
Open Ground and Neutral Test Switches
■■
Line, Voltage, Polarity and Receptacle Ground Test
■■
Polarity Switch for Test Receptacle
■■
Includes Isolated Power System Tests and Line Isolation Test
Ohmic BET300AD (L)
Biomedical
Electrical Safety Test Set
the test equipment answer
11
Relay and Protection Test Equipment
Manta MTS-5000
Three Phase Relay Test System
Manta MTS-5000
Three Phase Relay Test System
12
■■
Simple Manual Controls Provide Access to Advanced Functions without a Computer
■■
On Board Color Display Indicates Vector Displays, Intuitive Control Menus, and Complex Poly-Phase Output Signals
■■
Standard Configuration Provides Three AC/DC Voltage Outputs, Three AC/DC Current Outputs, and a Single DC Voltage
Output
■■
Twelve Channels of Status Inputs and Four Digital Outputs for Detailed Interaction with Relays Under Test
■■
USB and Ethernet Interfaces
■■
Extensive on Board Help Screens with Tutorials and Connections Diagrams
■■
Vertical Configuration Minimizes Footprint in Small Control Rooms and Generator Protection Panels
■■
Configure both Pre-fault and Fault Settings for Dynamic Relay Testing or Utilize Static Relay Testing Methods
■■
Compact and Lightweight (49 Lbs)
■■
Low Level DCV/mA Inputs for Calibrating Transducers
■■
Currents can be Paralleled for High VA Output
■■
Optional GPS Antenna for End-To-End Testing
■■
Comtrade (.cfg) and Waveform Playback Capable
888.902.6111
■
www.intellirentco.com
Omicron CMC 356
Three Phase Relay Test System
Omicron CMC 356
Three Phase Relay Test Set
■■
High Versatility and Functionality For All Generations and Types of Protective Relays
■■
Standard Configuration Includes Six Current Outputs (in Three Phase Mode, 64A/860VA Per Channel or One Channel at
128A/1000VA) for Maximum Flexibility and Range of Applications
■■
Optional GPS or IRIG-B Accessories for End-to-End Testing
■■
Simulates Transient Faults, Power Swing, CT Saturation, CB or Rogowski Coil Simulation
■■
Transient Playback Through Comtrade, PL4 (EMTP), etc.
■■
Ten Binary Inputs (Dry/Wet)
■■
On-Board 10 Channel Recorder for Typical Power Values, Transients, Trend Recordings and Harmonic Analysis
■■
Provided by Intellirent with a Laptop Preconfigured with Test Universe Software for Automated Testing or CMControl
for Manual Testing
■■
Lightweight (37 Lbs) and Easily Transported In Intellient’s Ruggedized Case
the test equipment answer
13
Relay and Protection Test Equipment
Megger SMRT36
Three Phase Relay Test Set
■■
Three Convertible Channels (300V or 15A) and Three 60A Channels
■■
10 Binary Inputs and 6 Binary Outputs
■■
Bluetooth, USB or Ethernet Communication Between SMRT36 and Computer
■■
Optional Chaining SMRT36 Units Together for up to 24 Outputs
■■
Megger’s Smart Touch View Interface (STVI) Provides Simple Touchscreen
Graphical Interface for Testing Most Relays
■■
Realtime Display of Phasor and Values
■■
Variable Battery Simulator
■■
High Current Output Suitable For Modern and Electromechanical
Applications
■■
Complex Impedance Testing Simplified with Built in Relay Library
■■
On Board Storage of Test Results in PowerDB Format or Immediate Export To
Optional Computer Controller
■■
Compact and Lightweight (26 Lbs)
Megger SMRT36
Three Phase Relay Test Set
Programma Sverker 760
Single Phase Relay Test Set
■■
Simple and Intuitive Front Panel Interface
■■
High Current/VA Outputs Permit Testing of Most Single Phase Relays and
Some Three Phase Devices
■■
Two Voltage Outputs and One Current Output, Plus Variable DC Power
Supply and Flexible On-Board Timer
■■
Continuous Phase Shift Function Enables Testing of Directional Relays or
Automatic Reclosing Devices
■■
Flexibility To Perform Varied Applications, Including Plotting of Excitation
Curves, CT and PT Ratio Testing, Burden and Impedance Measurement,
Polarity Tests and Manual Secondary Injection of Current and/or Voltage
Programma Sverker 760
Single Phase Relay Test Set
14
888.902.6111
■
www.intellirentco.com
Doble F6150
Three Phase Relay Test System
Doble F6150
Three Phase Relay Test System
■■
Fully Automated Testing Through Protest Test Plans
■■
Simple, Manual Testing Through Control Panel Software
■■
Provided by Intellirent with a Protest Configured Laptop Computer and Appropriate Leads and Connectors for Most
Relay Testing Applications
■■
Standard Configuration Includes Three 300VAC Outputs and Three 30Amp AC Outputs Simultaneously
■■
Software Adjustment Permits a Variety of Other Configurations, Including Four Voltages and Four Currents, a Single
Current at 675VA and Much More.
■■
Variable Phase Angle, Frequency Generation, Phase Shifting and on Board Battery Simulator for Energizing Relays
Before Control Power is Available
■■
Includes Doble TransWin Software for Comtrade Config File (.cfg) Playback
■■
Optional Satellite Antenna Provides for End-To-End Testing
■■
Optional Doble F6300 Increases Current Output
the test equipment answer
15
Relay and Protection Test Equipment
Doble F2700
Single Phase Relay Test Set
Doble F2700
Single Phase Relay Test Set
■■
Multiple Output Configurations, Including One Voltage and One Current,
Two Voltages, or Two Currents
■■
Voltage Output Up to 300VAC (Phase to Ground)
■■
Onboard Timer, Phase Shifter and Frequency Generator
■■
Current Output to 26Amps AC Continuous
■■
Simple Front Panel Control
■■
Optional Doble F2010 Mini Controller Available for Fine Frequency
Adjustments and Remote Control
■■
Optional Computer Control Available Via Protest Software
Doble F2253
Single Phase Relay Test Set
Doble F2253
Single Phase Relay Test Set
■■
Multiple Output Configurations, Including One Voltage and One High VA
Current or Two Currents
■■
Voltage Output Up To 300VAC (Phase to Ground) or 424VDC Continuous
■■
Onboard Timer, Phase Shifter and Frequency Generator
■■
Current Output up to 90 Amps AC or 60 Amps DC Continuous
■■
Simple Front Panel Operation
■■
Optional Doble F2010 Mini Controller Available for Fine Frequency
Adjustments and Remote Control
■■
Optional Computer Control Available Via Protest Software
Doble F2010
Minicontroller
■■
Permits Flexible Hand Held Control of Doble F2000 Series Units
■■
Precisely Adjust Voltages, Current, Phase Angle and Frequency
■■
Enables Adjustment of Any Two Values for Dynamic Testing
Doble F2010
Minicontroller
16
888.902.6111
■
www.intellirentco.com
intellirent support note
relay testing project suppor
intellirent supports the customer’s entire testing application.
For relays and other protective devices, this is particularly important
because these devices have become increasingly complex and require
more than just the test equipment to properly communicate with, test
GE Multilin F485
and calibrate the device.
intellirent supports Customers with:
■■
Model specific accessories, including test jacks or paddles
■■
Communications accessories such as signal converters and
interface cables
■■
Software for relay interface and pre-developed test plans and
macros to suit the relay being tested
■■
Assistance with relay settings analysis, including settings
development services
GE 12XA12A1
Doble F6895
■■
Test set accessories, including GPS antennas and application
specific lead sets
■■
Calibrators and signal generators for temperature (RTD/TC),
frequency, mV or 4-20mA loops
Signal Generators
the test equipment answer
17
Transformer Test and Diagnostic Equipment
Doble M4000
12kV Power Factor Test Set
Doble M4000
12kV Power Factor Test Set
■■
Rugged Construction for Field Use with Laboratory Accuracy and Precision
■■
Industry Standard for Testing Electrical Apparatus such as Transformers,
Generators, and Cables
■■
Evaluates Integrity of High Voltage Substation Apparatus by Measuring Power
Factor/Tan Delta
■■
Measures Capacitance to Evaluate Physical Changes
■■
Measures Accurately in High Electrostatic and Electromagnetic Conditions
■■
Measures Excitation Current to Evaluate Transformer Magnetizing Circuit
■■
Line Frequency Modulation Technology Eliminates Substation Interference
■■
Automated Testing Procedures Through DTA or Manual Through M4000
Clipboard
■■
Provided by Intellirent with an M4000 Clipboard and DTAF Pre-Configured
Laptop, Safety Strobe, Temperature / Humidity Transmitter
■■
Internal Field Calibration Reference Ensures Accurate Testing
■■
Built in Diagnostics Provide Information on Instrument Status
■■
Output Current to 300mA at 10kV (Total Output Power 3kVA) for Better
Replication of In-Service Conditions
■■
Optional Type C Resonator Increases Output Capacity
■■
Optional M4110 Available for Measuring the Impedance of the Apparatus
Under Test
■■
Optional M4140 Available for Measuring Capacitance of Capacitor Banks
■■
Optional Liquid Insulation Test Cell For Measuring Insulating Characteristics
of Oil
■■
Optional TTR Capacitor for Measuring Transformer Ratio
Doble M4110/M4140
Leakage Reactance Module
■■
Performs Short Circuit Impedance Tests on Transformers
■■
Simple to Connect and Operate Using M4100 Automated Testing
Procedures
■■
Provided with Software Integrated with M4000/DTA Preconfigured Laptop
Computer
Doble M4110/M4140
Leakage Reactance Module
18
888.902.6111
■
www.intellirentco.com
Doble M5400
Sweep Frequency Response Analyzer
■■
Analyzes the Winding Relationship Inside a Transformer
■■
Optimal for Winding Movement Assessment After Transport, High
Magnitude Faults, and Lightning Strikes
■■
Simple Hookup and Automated Testing
■■
Results Management Software for Establishment of Baseline Data and
Trending
■■
Provided by Intellirent with a Preconfigured Laptop
Doble M5400
Sweep Frequency
Response Analyzer
Megger CB-100
Low Voltage Capacitance and Insulation Power Factor Test Set
■■
Lightweight (21 lbs) and Portable
■■
Output of 26V at 100Hz Minimizes 60Hz Interference
■■
Performs UST and GST Configuration Testing
■■
Direct Reading of Capacitance and Dissipation Factor
■■
Simple Manual Interface
■■
Optimal for Transformer Dry Out
Megger CB-100
Low Voltage Capacitance and
Insulation Power Factor Test Set
the test equipment answer
19
Transformer Test and Diagnostic Equipment
Omicron DIRANA
Dielectric Response Analyzer
■■
Reliably Identifies Moisture Content in Oil-Paper Insulation for New or Aged
Insulation
■■
Provided with Detailed Connection Diagrams for Most Measurement Scenarios
■■
Integrated Database Grades Moisture Level (No Expert Knowledge Required)
■■
Provided by Intellirent With DIRANA Preconfigured Laptop Computer
■■
Effective Tool for Complete Transformer Maintenance, or Diagnosis of Motor,
Cable or Instrument Transformer Insulation.
Omicron DIRANA
Dielectric Response Analyzer
Omircon FRAnalyzer
Sweep Frequency Response Analyzer
Omircon FRAnalyzer
Sweep Frequency
Response Analyzer
20
■■
Detects Winding Defects and Faults in Transformer Core
■■
Appropriate for Complete Transformer Maintenance or Following a
Short Circuit, Transport, Transient Fault Currents, Considerable Change In
Monitored Values (I.E., DGA).
■■
Repeatable and Trendable Results With Advanced Connection Technique
■■
Powerful and Intuitive Omicron FRAnalyzer Software Enables Simple
Comparison of Data and Report Generation
■■
Expert Assistance Available
■■
Provided by Intellirent With FRAnalyzer Preconfigured Laptop Computer
and Complete Connection Kit
■■
Battery Operated
888.902.6111
■
www.intellirentco.com
EA Tech UltraTev +
Multifunction Partial Discharge Analyzer
EA Tech UltraTev +
Multifunction Partial Discharge Analyzer
■■
Quickly Identify Presence and Severity of Partial Discharge in Electrical Apparatus
■■
Baselines Partial Discharge Activity to Direct Maintenance Activities
■■
Measures Surface Partial Discharge As Numerical dB Values and Measures Internal Partial Discharge as TEV Values
■■
Gathers Partial Discharge Data For Comparison and Trending
■■
Automatically Grades Condition of Transient Earth Voltages (TEV) and Ultrasonic Values For Immediate Analysis
■■
Simple and Intuitive Operation Though Menu Driven, Multifunction Display
■■
Provided by Intellirent With UltraDish Parabolic Waveform Concentrator, Flexible Sensor, External Microphone, Surface
Contact Probe, and Headphones for Surface, Internal or Overhead Applications
the test equipment answer
21
Transformer Test and Diagnostic Equipment
Omicron CPC 100
Multifunction Primary Test System
Omicron CPC 100
Multifunction Primary Test System
■■
Provides for Automated Testing of Power Transformers, CTs, VTs, Resistance Testing and More
■■
Optimal For Emergent Requirements or Remote Applications - One Device Replaces Multiple Instruments
■■
Onboard or Computer Driven Test Plans For “Push Button To Start” Automation
■■
Automatic Results Storage and Report Generation
■■
Stand Alone Functionality For:
• Ratio, Burden and Polarity, Phase and Magnitude Error, Excitation Curve, Winding Resistance, Secondary Burden and
Dielectric Withstand Tests for CTs and PTs
• Ratio, Winding Resistance, Tap Changer Testing, Excitation Current, Short Circuit Impedance Measurement and
Leakage Reactance Testing of Transformers
• Contact Resistance, Winding Resistance, Ground Resistance or Measurement of Complex Impedances
• Single Phase Testing of Primary and Secondary Relays (Including Over Current, Over Voltage, Undervoltage and
Frequency Relays
22
■■
Optional TD-1 Performs Tangent Delta and Power Factor Tests
■■
Flexible AC and DC Power Supply to 2kV AC, 400A DC, 800A AC
■■
Optional CP CB2 Boosts Current Output to 2000A AC
■■
USB, Serial or Ethernet Interface
■■
Optional CPOL Permits Polarity Verification at Multiple Test Points
888.902.6111
■
www.intellirentco.com
Omicron CP TD1
Tangent Delta and Power Factor Attachment
■■
Controlled by The Omicron CPC-100 For Complete Capacitance and Tangent
Delta / Power Factor Measurement
■■
Measures Capacitance, Dissipation Factor, Power Factor, Power, and
Impedance
■■
12kV Output
■■
Onboard or Computer Driven Test Plans For “Push Button To Start”
Automation Through CPC-100
■■
Available With Integrated Hand Truck for Simplified Transport
Omicron CP TD1
Tangent Delta and Power
Factor Attachment
Omicron CPOL
Polarity Checker
■■
Integrates with Omicron CPC-100 For Comprehensive Current and Voltage
Polarity Verification Throughout System
■■
CPC-100 Injects a Specialized Signal Over Primary Circuits for Red/Green
Polarity Indication on Portable CPOL
■■
Faster Than Traditional Methods and Documented on CPC-100 Polarity
Check Test Card
Omicron CPOL
Polarity Checker
Omicron CP CB2
Current Booster
■■
Integrates With Omicron CPC-100 For a Increased Output of up to 2000A AC.
■■
Provided With Short or Long Output Leads For Varying Applications
■■
Output of 2000A at 2.45V for 25 Seconds at 15-400Hz
Omicron CP CB2
Current Booster
the test equipment answer
23
Transformer Test and Diagnostic Equipment
Raytech WR-50-12
Winding Resistance Test Set With Demagnetization
■■
50A Output for Testing the Largest Transformers with Repeatable Readings
■■
Automatically Demagnetizes Winding upon Test Completion
■■
2 Measurement Channels and Onboard Printer Convenience
■■
Bright Touchscreen Interface or Full Computer Control
■■
Color Coded Connections and Simple interface for Fast Familiarization
■■
Automatic Discharge Circuit
■■
Optional Heat Run Software and Three RTD Inputs
Raytech WR-50-12
Winding Resistance Test Set
With Demagnetization
Raytech WR-14
■■
15A Output for Testing Most Transformers with Repeatable Readings
■■
Battery or Line Powered
■■
2 Measurement Channels and Onboard Printer Convenience
■■
Bright Touchscreen Interface or Full Computer Control
■■
Color Coded Connections and Simple interface for Fast Familiarization
■■
Automatic Discharge Circuit
■■
Onboard Storage of Results
■■
Lightweight (21 Lbs)
Raytech WR-14
Winding Resistance Test Set
24
888.902.6111
■
www.intellirentco.com
Vanguard WRM-40
Winding Resistance Test Set
■■
Automatic Current Ranging from 10 mA to 40 A
■■
2 Measurement Channels
■■
On Board Printer for Immediate Results Documentation
■■
Internal Memory Stores 48 Records of 63 Readings
■■
Automatic Discharge Circuit
■■
Lightweight (30 Lbs)
■■
Simple Menu Driven Operation
Vanguard WRM-40
Winding Resistance Test Set
Vanguard WRM-10
Winding Resistance Test Set
■■
Automatic Current Ranging from 10 mA to 10 A
■■
2 Measurement Channels
■■
Automatic Discharge Circuit
■■
Lightweight (27 Lbs)
■■
Simple Menu Driven Operation
■■
Vanguard WRM-10P Model Includes On Board Printer
Vanguard WRM-10
Winding Resistance Test Set
the test equipment answer
25
Transformer Test and Diagnostic Equipment
Raytech TR-Spy Mark II
Three Phase TTR
■■
Simple Transformer Type Selection
■■
Measures Voltage/Turns Ratio, Current and Phase Displacement
■■
Internal Storage of 100 Test Results with RS-232 Interface
■■
Ratio Measurement from .08 to 13,000 Turns
■■
Optional Raytech T-Rex Measures Phase Relationship of Windings while
Three Phase Voltage is Applied
Raytech TR-Spy Mark II
Three Phase TTR
Raytech T-Rex
Three Phase Voltage Option
■■
Fully Automatic with Seamless Integration to Raytech TR-SPY Mark II
■■
Measure Phase Relationships of Transformer Windings while Applying Three
Phase Voltage
■■
Especially Useful when Measuring Ratio of Zig-Zag Type Transformers
Raytech T-Rex
Three Phase Voltage Option
Raytech TR-1
Single Phase TTR
■■
Lightweight (7 Lbs) and Battery Operated
■■
Measures Transformer, PT or CT Ratio and Polarity
■■
Raytech TR-1P Includes Onboard Printer
■■
Internal Storage of 50 Test Results
■■
Ratio Measurement from 0.8 to 4,000 Turns
Raytech TR-1
Single Phase TTR
26
888.902.6111
■
www.intellirentco.com
Raytech TR-SPY Mark III
Three Phase TTR
■■
Simplified and Convenient Touchscreen User Interface for Test Setup,
Results Display and Documentation Storage
■■
USB Interface For Documentation and Test Plan Transfer
■■
Automated Test Voltage Selection
■■
Automatic Measurements of Voltage, Turns Ratio, Current and Phase
Displasement
■■
Automatic Phase Vector Detection
■■
Includes Percent Error Vs. Nameplate Data For Secondary and Tertiary
Windings
■■
Onboard or Computer Based User Configured Transformer Test Plans
■■
Graphical Tap Changer Display
■■
Tap Changer Interface (Input and Output)
■■
Optional Raytech T-Rex Automates Testing by Measuring Phase Relationships
of Transformer Windings While Appliying Three Phase Voltage
Raytech TR-Spy Mark III
Three Phase TTR
Vanguard ATRT-03 S2
Three Phase TTR
■■
Internal Data Storage of 200 Test Results
■■
USB Port for Simple Data Transfer
■■
Simple Circuit Type Designations Using Diagrams
■■
Provided with Software for Computer Controlled Testing
■■
On Board Printer for Immediate Results Documentation
■■
Ratio Measurement from 0.8 to 15,000 Turns
Vanguard ATRT-03 S2
Three Phase TTR
Hipotronics OC60D
Oil Dielectric Test Set
■■
Simple Operation and Controls
■■
60kV AC Output Voltage
■■
Single Piece Construction
■■
Test Cells for ATSM D877, ASTMD1816 and IEC 156 Testing
■■
High Voltage Automatically Ramps, Dicharges, and Records Voltage Upon
Flashover
Hipotronics OC60D
Oil Dielectric Test Set
the test equipment answer
27
Transformer Test and Diagnostic Equipment
Vaisala DM70
Dewpoint Analyzer
■■
Accurate, Fast Measurements for SF6 or Transformer Nitrogen Blanket
Applications
■■
Measures Temperature, Dewpoint, Absolute Humidity, and Relative Humidity
■■
Provided by Intellirent with Sampling Cell and Fitting Kit
■■
Measurement Ranges from -60 to 60°C (-76 to 140°F) and 40 to 200K ppm
Vaisala DM70
Dewpoint Analyzer
Qualitrol KIT-013-1
Sudden Pressure Relay Test Kit
■■
Self Contained Kit with Pressure Source Pump, Timer, Gauge, Fittings, Tubes,
and Tools
■■
Battery Operated
■■
Relief Valve for Relay and Test Set Protection
Qualitrol KIT-013-1
Sudden Pressure Relay Test Kit
Fluke 9141
Dry Block Calibrator
■■
Lightweight (8 Lbs) and Portable
■■
122 °F to 1202 °F, Accuracy to 1°F
■■
12 Minutes from Ambient to 1200 °F
■■
Provided with 1/16”, 1/8”, 3/16”, 1/4”, 1/3”, 1/2” and 1” Inserts
Fluke 9141
Dry Block Calibrator
28
888.902.6111
■
www.intellirentco.com
Vanguard EZCT/EZCT-10
Automated CT Test Set
■■
Measures Excitation Voltage and Current, Turns Ratio, Winding Polarity on
Single Phase and Multi-Phase CTs
■■
Excitation Voltages Up To 1200V, Current to 2A (at 200V)
■■
Operation from Front Panel or Through Computer Control
■■
CT Ratio and Excitation Knee Point Calculated and Charted Automatically
■■
Capable of Testing 0.8 Through 5000 to 1 CT Ratios
■■
Onboard Printer For Immediate Results Documentation
■■
EZCT-10 Model Increases Excitation Current to 10A (at 200V)
Vanguard EZCT/EZCT-10
Automated CT Test Set
Vanguard EZCT-2000A
Automated Multi-Tap CT Test Set
■■
Measures Excitation Voltage and Current, Turns Ratio, Winding Polarity on
Single and Multi-Tap CTs
■■
Excitation Voltages to 2000V AC, Current up to 10A (at 300V)
■■
Fully Automated, Connects to All CT Output Terminals Simultaneously – No
Lead Switching Required
■■
Plots Multiple Saturation Curves
■■
Operations From the Front Panel or Through Computer Control
■■
CT Ratio and Excitation Knee Point Calculated and Charted Automatically
■■
Five Voltage Test Settings – 50, 300, 500 and 1200 and 2000V AC
■■
Measures DC Resistance in CT Windings
■■
Onboard Memory Stores 140 Test Records (Of 10 Saturation Curves) and 128
Test Plans
■■
Ratio Accuracies of 1% or Better
■■
Extended 35’ Lead Lengths
Vanguard EZCT-2000A
Automated Multi-Tap CT Test Set
Vanguard EZCT-2000B
Automated Multi-Tap CT Test Set
■■
Measures Excitation Voltage and Current, Turns Ratio, Winding Polarity
and Phase Angle Tests on Single and Multi-Tap CTs
■■
Measures Insulation Resistance and Winding Resistance on CT secondary
windings
■■
Measures CT Secondary Burden
■■
Excitation Voltages to 2000V AC, Current up to 10A (at 300V)
■■
Fully Automated, Connects to All CT Output Terminals Simultaneously –
No Lead Switching Required
■■
Plots Multiple Saturation Curves
■■
Operations From the Front Panel or Through Computer Control
■■
CT Ratio and Excitation Knee Point Calculated and Charted Automatically
■■
Five Voltage Test Settings – 50, 300, 500 and 1200 and 2000V AC
■■
Measures DC Resistance in CT Windings
■■
Onboard Memory Stores 140 Test Records (Of 10 Saturation Curves) and
128 Test Plans
■■
Ratio Accuracies of 1% or Better
■■
Extended 35’ Lead Lengths
Vanguard EZCT-2000B
Automated Multi-Tap CT Test Set
the test equipment answer
29
Switchgear and Circuit Breaker Test Equipment
Raytech Micro Junior II
10A Low Resistance Ohmmeter (DLRO)
■■
Provided With Kelvin Probes (pictured)
■■
Automated Measurement Detection and Storage Modes
■■
Onboard Printer
■■
Automatic Polarity Reversal
■■
Battery Operated
Raytech Micro Junior II
10A Low Resistance Ohmmeter
(DLRO)
AEMC 6240
10A Low Resistance Ohmmeter (DLRO)
■■
Provided with Kelvin Probes (pictured)
■■
Battery Operated, Light Weight and Compact Design
■■
User Selectable Test Current and Resistance Ranges
■■
Internal Storage of Readings with Data Storage and Analysis Software
Included
AEMC 6240
10A Low Resistance Ohmmeter
(DLRO)
AEMC 6250
10A Low Resistance Ohmmeter (DLRO)
■■
Provided with Kelvin Probes (pictured)
■■
Battery Operated, Light Weight and Compact Design
■■
User Selectable Test Current and Resistance Ranges
■■
Internal Storage of Readings with Data Storage and Analysis Software
Included
■■
Includes Temperature Compensation and User Selectable Resistive or
Inductive Materials Measurement
AEMC 6250
10A Low Resistance Ohmmeter
(DLRO)
30
888.902.6111
■
www.intellirentco.com
Vanguard Auto-Ohm SII
100A Low Resistance Ohmmeter (DLRO)
■■
Measures Resistance Using 10A to 100A Output (In 2A Steps)
■■
Simple Push Button Control from the front Panel
■■
Provided by Intellirent with 30’ Cables
■■
Accuracy is +/- 1% of Reading
Vanguard Auto-Ohm SII
100A Low Resistance Ohmmeter
(DLRO)
Raytech Micro Centurion II
200A Low Resistance Ohmmeter (DLRO)
■■
Selectable Output from 10A to 200A
■■
Onboard Printer
■■
Provided with Heavy Duty Alligator Clamps and 15’ Cables
■■
High Precision – Measurements from .01 µΩ to 20 µΩ with Resolution
of 0.01 µΩ
■■
Internal Memory Records 2000 Test results
Raytech Micro Centurion II
200A Low Resistance Ohmmeter
(DLRO)
Megger DLRO600
600A Low Resistance Ohmmeter (DLRO)
■■
Test Currents From 10 to 600A
■■
Internal Storage of Test Data for Download or Printing on Site with
Optional Printer
■■
Lightweight (33 Lbs.) Compact Design
■■
Provided with Heavy Duty Alligator Clamp or Optional C Clamps
Megger DLRO600
600A Low Resistance Ohmmeter
(DLRO)
the test equipment answer
31
Switchgear and Circuit Breaker Test Equipment
Metrel 3121
1kV Megohmmeter
■■
Large LCD Displays Bargraph and Insulation Resistance
■■
Measurement Ranges Up To 30GΩ
■■
Test Voltages from 50V to 1kV
■■
Measures Voltage and Frequency
■■
Pass/Fail Indication with Bright Red/Green LEDs
■■
Built In Battery Charger
■■
USB and RS-232 Ports For Results Download and Documentation
■■
Includes EuroLink PRO Software
Metrel 3121
1kV Megohmmeter
Metrel 2077
5kV Megohmmeter
Metrel 2077
5kV Megohmmeter
■■
Line or Battery Operated
■■
Test Voltages from 250V to 5kV in steps of 50V
■■
Automatic PI, DAR and DD Index Calculations
■■
Adjustable Measurement Timer From 1 Second to 30 Minutes
■■
Automatic Discharge of Capacitive Loads
■■
Digital and Bar Graph Display
■■
Measures Insulation to 5 TΩ
■■
Internal Memory Stores 1000 Measurements
■■
Capacitance Measurements up to 50uF
Metrel 3201
5kV Megohmmeter with Fault Identifier
Metrel 3201
5kV Megohmmeter
with Fault Identifier
32
■■
Line or Battery Operated
■■
Test Voltages from 250V to 5kV in steps of 25V
■■
Automatic PI, DAR and DD Index Calculations
■■
Programmable Step Voltage and Withstand Voltage Functions to Assist in
Diagnosing Faults
■■
Plots Real Time Resistance to Time
■■
Adjustable Measurement Timer From 1 Second to 30 Minutes
■■
Capacitance Measurements to 50uF
■■
Automatic Discharge of Capacitive Loads
■■
Digital and Bar Graph Display
■■
Measures Insulation to 5 TΩ
■■
Internal Memory Stores 1000 Measurements
888.902.6111
■
www.intellirentco.com
Megger S1-552/2 and S1-1052/2
5kV and 10kV Megohmmeter
■■
Simple to Use with Intuitive Controls and Features
■■
Battery or Line Operated
■■
Vary Test Voltages in 10V Increments Between 50V and 1kV and in 25V
Increments from 1kV to 5kV
■■
Performs PI, Step Voltage, Dielectric Discharge, Dielectric Absorption Ratio
Automatically.
■■
Burn and Breakdown Functions Available in Insulation Resistance Mode
■■
Load Capacitance is Measured and Reported when Tests are Concluded
■■
Provided with Download Software
■■
S1-1052/2 Extends Voltage Output Range to 10kV
Megger S1-552/2 and S1-1052/2
5kV and 10kV Megohmmeter
Metrel 3200
10kV Megohmmeter
■■
Line or Battery Operated
■■
Test Voltages from 500V to 10kV in 25V Steps
■■
Automatic Discharge of Capacitive Loads
■■
Digital and Bar Graph Display
■■
Measures Insulation to 10 TΩ
■■
Capacitance Measurements to 50uF
Metrel 3200
10kV Megohmmeter
Megger 210415
15kV Megohmmeter
■■
Continuously Variable Test Voltage to 15kV
■■
Line Operated
■■
Available in 5kV or 15kV Models
■■
Suitable for DAR, PI and Step Voltage Testing
Megger 210415
15kV Megohmmeter
the test equipment answer
33
Switchgear and Circuit Breaker Test Equipment
Vanguard MCCB-250
250A High Current Test Set
Vanguard MCCB-250
250A High Current Test Set
■■
Programmable High Current Source Appropriate for Testing Molded-Case Circuit
Breakers and Thermal Magnetic or Solid State Overload Motor Protection Relays
■■
Rugged and Robust Design For Field Applications
■■
Onboard Multifunction Timer
■■
Simple Operations and Controls
■■
Four Current Outputs (5A @ 120V, 25A @ 24V, 120A @ 6V and 250A @ 3V)
Current
On Time
Off Time
250A
30 Min
30 Min
500A
3 Min
5 Min
750A
30 Sec
4 Min
1000A
4 Sec
7 Min
Megger MS-2
600A High Current Test Set
■■
Instantaneous Current to 600A or Continuous Current to 240A
■■
Memory Ammeter and Seconds/Cycles Timer
■■
Lightweight (33 Lbs) and Compact
■■
Provided with 5’ Heavy Duty (No. 4) Test Leads
Megger MS-2
600A High Current Test Set
34
888.902.6111
■
www.intellirentco.com
Vanguard PCI-600
600A High Current Test Set
■■
Programmable High Current Source for Utility Substation Applications for
Relay or Breaker Applications
■■
On Board Multifunction Timer
■■
Measures Internal and External Currents
■■
Simple Operations and Controls
Output at 120V
Time
5.6V at 100A
1 Hour
5.3V at 200A
5 Min
4.9V at 300A
2 Min
4.6V at 400A
1 Min
4.2V at 500A
30 Sec
3.9V at 600A
20 Sec
Vanguard PCI-600 600A
High Current Test Set
Phenix HC1
1000A High Current Test Sets
■■
Instantaneous Current to 1000A or Continuous Current to 240A From 110V.
■■
Memory Ammeter and Seconds/Cycles Timer
■■
Approximately 70 Lbs
■■
Provided with 5’ Heavy Duty (No. 2) Test Leads
Phenix HC1
1000A High Current Test Sets
Phenix HC2
2000A High Current Test Sets
■■
Instantaneous Current to 2000A to Continuous Current to 500A from 110V.
■■
Memory Ammeter and Seconds/Cycles Timer
■■
Approximately 115 Lbs
■■
Provided with 5’ Heavy Duty (No. 2) Test Leads
Phenix HC2
2000A High Current Test Sets
the test equipment answer
35
Switchgear and Circuit Breaker Test Equipment
Electrical Test Instruments PI-4000
40,000A High Current Test Set
■■
Intuitive and Rugged MAC-20 Digital Instrumentation with Memory Ammeter
and Seconds/Cycles Timer
■■
208/240 or 480V Input
■■
Optional Autotransformer for 480V Input
■■
Provided by Intellirent with 1/2” and 3/4” Universal Stabs, Input Cables and
Custom Output Cabling to Meet Specific Customer Requirements
■■
Output Current and Overload Capabilities:
9V Parallel
18V Series
Overload
Duty
Max On
Time
Max Off
Time
4000A
5600A
8000A
12000A
16000A
20000A
28000A *
2000A
2800A
4000A
6000A
8000A
10000A
14000A *
1X
1.4 X
2X
3X
4X
5X
7X
100%
50%
25%
10%
6%
4%
2%
Continuous
15 Min
5 Min
1.5 Min
45 Sec
4 Sec
2 Sec
N/A
15 Min
15 Min
15 Min
15 Min
2 Min
2 Min
Max Input
Current
at 480V
94A
140A
187A
281A
375A
468A
656A
40000A *
20000A *
10 X
1%
1 Sec
2 Min
937A
Electrical Test Instruments PI-4000
40,000A High Current Test Set
Electrical Test Instruments PI-2500 / 5000
25,000A or 50,000A High Current Test Set
Electrical Test Instruments
PI-2500 / 5000
25,000A or 50,000A High
Current Test Set
36
■■
Intuitive and Rugged MAC-20 Digital Controller with Memory Ammeter
and Seconds/Cycles Timer
■■
55.2kVA Continuous for Testing up to 4000A Circuit Breakers
■■
480V Input
■■
Rugged Two Piece Design Supports 2500A or 4000A Circuit Breaker Testing
■■
Provided by Intellirent With 1/2” and 3/4” Universal Stabs, Input Cables and
Custom Output Cabling To Meet Specific Customer Requirements
■■
Output Current and Overload Capabilities:
7.6V Parallel 15.2V Series
Overload
Duty
Max On
Time
Max Off
Time
Max Input
Current
4000A
5600A
8000A
16000A
20000A
32000A
40000A
2000A
2800A
4000A
8000A
10000A
16000A
20000A
1X
1.4 X
2X
4X
6X
8X
10 X
100%
50%
25%
6%
2%
1.60%
1%
Continuous
15 Min
5 Min
1 Min
6 Sec
1 Sec
.5 Sec
N/A
15 Min
15 Min
15 Min
2 Min
1 Min
1 Min
96A
134A
192A
384A
480A
672A
960A
60000A
30000A
Max
0.10%
.03 Sec
1 Min
1440A
888.902.6111
■
www.intellirentco.com
240V Input
Electrical Test Instruments PI-800
8,000A High Current Test Set
■■
Convenient One-Man Portable Two Piece Design, Total Weight
Approximately 125 Lbs
■■
Intuitive and Rugged MAC-20 Digital Controller with Memory Ammeter
and Seconds/Cycles Timer
■■
4.2kVA Continuous Rating for Testing Up To 800A Circuit Breakers
■■
120V or 208-240V Input (Switch Selectable)
■■
Optional Autotransformer for 480V Input
■■
Provided by Intellirent With 1/2” and 3/4” Universal Stabs, Input Cables
and Custom Output Cabling To Meet Specific Customer Requirements
■■
Output Current and Overload Capabilities
N/A
15 Min
15 Min
20 Min
20 Min
2 Min
2 Min
1 Min
Max Input
Current
at 240V
18A
25A
36A
50A
72A
90A
126A
180A
Max Input
Current
at 120V
36A
50A
72A
100A
144A
180A
N/A
N/A
1 Min
300A
N/A
4.2V Series/
Parallel
8.4V Series
Overload
Duty
Max On
Time
Max Off
Time
800A
1120A
1600A
2400A
3200A
4000A
5600A
8000A
400A
560A
800A
1200A
1600A
2000A
2800A
4000A
1X
1.4 X
2X
3X
4X
5X
7X
10 X
100%
50%
25%
10%
6%
4%
2%
1%
Continuous
15 Min
5 Min
2.5 Min
75 Sec
4 Sec
2 Sec
.6 Sec
12800A
6400A
16 X
0.5%
.1 Sec
Electrical Test Instruments PI-800
8,000A High Current Test Set
Electrical Test Instruments PI-1600
16,000A High Current Test Set
■■
Convenient One-Man Portable Three Piece Design, Total Weight
Approximately 270 Lbs
■■
Intuitive and Rugged MAC-20 Digital Controller with Memory Ammeter
and Seconds/Cycles Timer
■■
240V Input
■■
Optional Autotransformer for 480V Input
■■
Provided by Intellirent with 1/2” and 3/4” Universal Stabs, Input Cables and
Custom Output Cabling to Meet Specific Customer Requirements
■■
Output Current and Overload Capabilities:
4.2V Series/
Parallel
8.4V Series
Overload
Duty
Max On
Time
Max Off
Time
1600A
2250A
3200A
4800A
6400A
8000A
11200A
800A
1125A
1600A
2400A
3200A
4000A
5600A
1X
1.4 X
2X
3X
4X
5X
7X
100%
50%
25%
10%
6%
4%
2%
Continuous
15 Min
5 Min
2.5 Min
75 Sec
4 Sec
2 Sec
N/A
15 Min
15 Min
20 Min
20 Min
2 Min
2 Min
Max Input
Current
at 240V
38A
53A
75A
112A
150A
187A
262A
16000A
8000A
10 X
1%
.6 Sec
1 Min
375A
Electrical Test Instruments PI-1600
16,000A High Current Test Set
the test equipment answer
37
Switchgear and Circuit Breaker Test Equipment
Omicron CPC 100
Multifunction Primary Test System
with Current Booster
Omicron CP CB2
Omicron CPC 100 and CP CB2
Multifunction Primary Test System with Current Booster
■■
Single Piece Design Suited for Automated Testing of Power Transformers, CTs, VTs, Resistance Testing and More
■■
Optimal For Emergent Requirements or Remote Applications - One Device Replaces Multiple Instruments
■■
CP CB2 Boosts Current Output to 2000A AC
■■
Output Current and Overload Capabilities:
Range
1000A
2000A
38
Current
Time On
Output Voltage
Output Power
Frequency
0-1000A
25 Sec
4.9V
4.9kVA
15-400 Hz
0-500A
30 Min
5V
2.5kVA
15-400 Hz
0-2000A
25 Sec
2.45V
4.9kVA
15-400 Hz
888.902.6111
■
www.intellirentco.com
Megger CB-845
4500A High Current Test Set
■■
Instantaneous Current to 4500A or Continuous Current to 1200A
■■
Memory Ammeter and Seconds/Cycles Timer
■■
Two Man Portable; Controller Weighs 70 Lbs, Output Transformer Weighs
123 Lbs
■■
Input Voltage 208 and 240V, 30A
■■
Provided by Intellirent with Input Cables and Custom Output Cabling to
Meet Specific Customer Requirements
Megger CB-845
4500A High Current Test Set
Megger DDA3000
35,000A High Current Test Sets
■■
Digital Controller Includes Memory Ammeter, Timer, and Voltmeter
■■
Intuitive DDA-1 Controller Provides for Simple Operation
■■
Provided by Intellirent with Universal 1/2” and 3/4” Stab, Input Cables and
Custom Output Cabling to Meet Specific Customer Requirements
■■
Maximum Current Output At 480V Input:
4500A Maximum Continuous Current
35,000A Maximum Current Through a Circuit Breaker
60,000A Maximum Current Through a Short Circuit
■■
30 Minutes On / 30 Minutes Off Duty Cycle
■■
Shipping Weight Approximately 1350 Lbs
■■
Available with Optional Megger AT-1 Input Autotransformer for 208/240
Source
Megger DDA3000
35,000A High Current Test Sets
Megger DDA6000
60,000A High Current Test Sets
■■
Digital Controller Includes Memory Ammeter, Timer, and Voltmeter
■■
Intuitive DDA-1 Controller Provides for Simple Operation
■■
Provided by Intellirent with Universal 1/2” and 3/4” Stab, Input Cables and
Custom Output Cabling to Meet Specific Customer Requirements
■■
Maximum Current at 480V Input:
6250A Maximum Continuous Current
60,000A Maximum Current Through a Circuit Breaker
100,000A Maximum Current Through a Short Circuit
■■
30 Minutes On / 30 Minutes Off Duty Cycle
■■
Shipping Weight Approximately 1350 Lbs
■■
Available with Optional Megger AT-1 Input Autotransformer for 208/240
Source
Megger DDA6000
60,000A High Current Test Sets
the test equipment answer
39
Switchgear and Circuit Breaker Test Equipment
Manufacturer
Model
Trip Unit/Circuit Breaker Reference
Page
ABB
504
Power Shield Trip Units (ITE)
41
ABB
505
Power Shield Trip Units
41
ABB
606
MPS Trip Units
41
ABB
607
MPSC Trip Units
41
ABB
BTSB
MPS, MPSC and MPSC 2000 Trip Units
42
ABB
PR010/T
Emax/SACE PR Trip Units
41
ABB
TT1
Emax/SACE PR Trip Units
41
Cooper Power Systems
METK1
MET / Kyle Reclosers
44
Cutler Hammer
1232C50G05
Seltronic and Series C Circuit Breakers
42
Cutler Hammer
140D481G02
Amptector Trip Untis
43
Cutler Hammer
140D481G03
Amptector and Digitrip Trip Units
42
Cutler Hammer
7801C57
Optim Series Trip Units
43
Cutler Hammer
1232C50G10
Seltronic and Series C Circuit Breakers
42
Cutler Hammer
SPBPTK
Pow-R-Trip Units
43
Cutler Hammer
8779C02G03
140D481G03 Adaptor for DS/DSII Circuit Breakers
42
Cutler Hammer
8779C02G04
140D481G03 Adaptor for Magnum DS Circuit Breakers
42
Cutler Hammer
MTK1000
Magnum DS Circuit Breakers
43
Cutler Hammer
PRTBAPMDV
Power Supply for Digitrip Trip Units
43
Cutler Hammer
70C1056
Digitrip Trip Units (+ Style)
43
GE
GTUTK20
Entelliguard Trip Units
44
GE
PST1-1
Power Sensor Trip Units
44
GE
TAKTS1
ECS / SST and VersaTrip Trip Units
44
GE
TVRMS2
MicroVersaTrip, MVT +, MVT PM, and Power + Trip Units
44
GE
TVTS1
MicroVersaTrip Trip Units
44
Merlin Gerin
34547
MicroLogic and STR Trip Units
45
Satin American
ETC-PTS
ETC Trip Units
46
Siemens
PTS-4
Static Trip, Static Trip II and Static Trip III Trip Units
46
Siemens
ELTPHB
VL Circuit Breakers
47
Siemens
TS-31
SB Circuit Breakers
46
Siemens
WLTS
WL Circuit Breakers
47
Siemens
SBAPM
Power Supply for SB Circuit Breakers
47
Siemens
WL FF
WL Circuit Breakers (Full Function)
47
Siemens
PTS-5
Static Trip III Trip Units
46
Square D
S33595
MicroLogic, ET and STR Trip Units
45
Square D
S33594
MicroLogic, ET and STR Trip Units
45
Square D
UTS-3
MicroLogic Trip Units
45
Square D
CBTMB
UTS-3 Adaptor for Series B Breakers
45
Square D
CBTM4A
UTS-3 Adaptor for Some Series 3 and 4 Breakers
45
Square D
CBTM3
UTS-3 Adaptor for Some Series 1, 2, 3 and 4 Breakers
46
SureTrip
CON1111
140D481G03 Adaptor for SureTrip/WestTrip Trip Units
47
Utility Relay
1-AC-PRO-TS
AC Pro Trip Units
47
Westinghouse
SCBII
Seltronic and Series C Circuit Breakers
47
Please Contact Intellirent for Applications Assistance. Circuit Breaker Manufacturer, Model, Options and Vintage
Affect Secondary Injection Test Set Selection.
40
888.902.6111
■
www.intellirentco.com
ABB 504
ABB 505
Power Shield Trip Units (ITE)
Power Shield Trip Units
ABB 606
ABB 607
MPS Trip Units
MPSC Trip Units
ABB PRO10/T
ABB TT1
EMax/SACE Trip Units
EMax/SACE PR Trip Units
the test equipment answer
41
Switchgear and Circuit Breaker Test Equipment
42
ABB BTSB
Cutler Hammer 140D481G03
MPS, MPSC and MPSC 2000 Trip Units
Amptector and Digitrip Trip Units
Cutler Hammer 1232C50G10
Cutler Hammer 8779C02G03
Seltronic and Series C Circuit Breakers
40D481G03 Adaptor for DS/DSII Circuit Breakers
Cutler Hammer 1232C50G05
Cutler Hammer 8779C02G04
Seltronic and Series C Circuit Breakers
140D481G03 Adaptor for Magnum DS Circuit Breakers
888.902.6111
■
www.intellirentco.com
Cutler Hammer 7801C57
Cutler Hammer SPBPTK
Optim Series Trip Units
Pow-R-Trip Units
Cutler Hammer 70C1056
Cutler Hammer MTK1000
Digitrip Trip Units (+ Style)
Magnum DS Circuit Breakers
Cutler Hammer 140D481G02
Cutler Hammer PRTBAPMDV
Amptector Trip Untis
Power Supply for Digitrip Trip Units
the test equipment answer
43
Switchgear and Circuit Breaker Test Equipment
44
Cooper Power System METK1
GE TVTS1
MET / Kyle Reclosers
MicroVersaTrip Trip Units
GE PST1-1
GE TVRMS2
Power Sensor Trip Units
MicroVersa Trip, MVT+, MVT PM Trip Units
GE TAKTS1
GE GTUTK20
ECS / SST and VersaTrip Trip Units
Entelliguard Trip Units
888.902.6111
■
www.intellirentco.com
Merlin Gerin 34547
Square D UTS-3
MicroLogic and STR Trip Units
MicroLogic Trip Units
Square D S33594
Square D CBTMB
MicroLogic, ET and STR Trip Units
UTS-3 Adaptor for Series B Breakers
Square D S33595
Square D CBTM4A
MicroLogic, ET and STR Trip Units
UTS-3 Adaptor for Some Series 3 and 4 Breakers
the test equipment answer
45
Switchgear and Circuit Breaker Test Equipment
Square D CBTM3
Siemens PTS-4
UTS-3 Adaptor for Some Series 1, 2, 3 and 4 Breakers
Static Trip, Static Trip II and Static Trip III Trip Units
Satin American ETC PTS
Siemens PTS-5
ETC Trip Units
Static Trip III Trip Units
Siemens WLTS
Siemens TS-31
WL Circuit Breakers
SB Circuit Breakers
46
888.902.6111
■
www.intellirentco.com
Siemens ELTPHB
Siemens SBPAM
VL Circuit Breakers
Power Supply for SB Circuit Breakers
Siemens WL Full Function
Utility Relay AC PRO
WL Circuit Breakers (Full Function)
AC Pro Trip Units
Westinghouse SCBII
SureTrip CON1111
Seltronic and Series C Circuit Breakers
140D481G03 Adaptor for SureTrip/WestTrip Trip Units
the test equipment answer
47
Switchgear and Circuit Breaker Test Equipment
Vanguard CT-6500 S2
Circuit Breaker Timer and Travel Analyzer
Vanguard CT-6500 S2
Circuit Breaker Timer and
Travel Analyzer
■■
Operates with Insertion Resistors up to 7000Ωs
■■
Initiates Breaker Operation
■■
Trip/Close Coil Current Monitoring Capabilities
■■
Monitors all 3 Breaker Poles Simultaneously
■■
Available with Up to 12 Contacts
■■
On Board Printer for Immediate Results Documentation
■■
Computer Interface Allows for Data Collection and Operational Control
■■
Internal Data Storage of 200 Test Results
■■
USB Port for Simple Data Transfer
■■
Three Transducer Inputs
■■
Provided by Intellirent with Application Appropriate Transducer(s)
Vanguard DIGITIMR
Circuit Breaker Timer and Travel Analyzer
Vanguard DIGITIMR
Circuit Breaker Timer and
Travel Analyzer
■■
Operates with Insertion Resistors up to 7000Ωs
■■
Initiates Breaker Operation
■■
Trip/Close Coil Current Monitoring Capabilities
■■
Monitors all 3 Breaker Poles at Once
■■
On Board Printer for Immediate Results Documentation
■■
Computer Interface Allows for Data Collection and Operational Control
■■
On Board Data Storage up to 150 Test Records
■■
Simplified Connections with One Main Contact Assemblys
■■
Single Transducer Input
■■
Provided by Intellirent with Application Appropriate Transducer
Vanguard Transducers
Vanguard Transducers
48
■■
Please Contact Intellirent for Applications Assistance. Breaker Manufacturer,
Model, Voltage, Options and Vintage Affect Transducer Selection
■■
All Transducers Connect Directly to Either the CT-6500 or the DIGITIMR
■■
Simple Setup Using Control Panel or Computer Integration with Breaker
Analyzer
Type
Description
LT-10
LT-24
RT-Mag
RT-MP
RT-HMB
LT-HMA
10” Linear
24” Linear
Universal Rotary With Magnetic Base
Universal Rotary With Mounting Plate
Circuit Breaker Model Specific
Circuit Breaker Model Specific
RT-DT1
Circuit Breaker Model Specific
888.902.6111
■
www.intellirentco.com
Dilo 3-027-R002
SF6 Volume Percentage (Purity) Analyzer
■■
Simple Operation and Logical Controls
■■
Indicates SF6 Volume Percentage (SF6 Purity by Volume) Independent of
Atmospheric Pressure and Location
■■
Accuracy of +/- 1% by Volume for 0-100% SF6 in SF6/N2
■■
Provided With DN20/DN8 Self Sealing Couplings and DILO Coupling DN20
Dilo 3-027-R002
SF6 Volume Percentage
(Purity) Analyzer
SF6 Purity Analysis Accessories
■■
Suitable to Connect 3-027-R002 To Most Gas Filled Apparatus
■■
SF6 Regulator Assembly
■■
DN8 Self Sealing Male to 3/8 Male NPT
■■
1/4” FJIC
■■
3/8” FJIC
■■
Siemens Aeroquip / SPS
■■
DN20 Self Sealing Male to 1 1/4” Parker (ITE, Westinghouse, ABB PA)
■■
DN20 Self Sealing Male to 3/8” Female NPT
■■
DN20 Self Sealing Male to 1” Male NPT
■■
DN20 Self Sealing Male to Malmquist (ABB PM)
SF6 Purity Analysis Accessories
Dilo 3-033-R002
SF6 Detector
■■
LED Display of SF6 Intensity or Concentration
■■
Multiple Levels of Sensitivity with Real Time Adjustment
■■
Battery Operated, Lightweight, and Simple to Operate
Dilo 3-033-R002
SF6 Detector
the test equipment answer
49
Switchgear and Circuit Breaker Test Equipment
Vaisala DM70
Dewpoint Analyzer
■■
Accurate, Fast Measurements for SF6 or Transformer Nitrogen Blanket
Applications
■■
Measures Temperature, Dewpoint, Absolute Humidity, and Relative Humidity
■■
Provided by Intellirent with Sampling Cell and Fitting Kit
■■
Measurement Ranges from -60 to 60°C (-76 to 140°F) and 40 to 200K ppm
Vaisala DM70
Dewpoint Analyzer
Magna PS12/480
AC/DC Power Supply
■■
Rugged Field Portable Design
■■
Simple and Intuitive Front Panel Controls
■■
Metered Outputs
■■
0-140V AC at 12A (2kVA)
■■
0-240V AC at 2A (500VA)
■■
0-480V AC at 1A (500VA)
■■
0-190V DC at 12A
■■
0-320V DC at 2A
Magna PS12/480
AC/DC Power Supply
Vanguard UPS-S2
AC/DC Power Supply
■■
Current Capability of 10A Continuous in Either AC or DC Voltage Ranges
■■
Variable DC Output Voltage of 300VDC Max
■■
Variable AC Output Voltage of 240VAC Max
■■
110V Line Powered
Vanguard UPS-S2
AC/DC Power Supply
50
888.902.6111
■
www.intellirentco.com
Doble M4000
12kV Power Factor Test Set
■■
Rugged Construction for Field Use with Laboratory Accuracy and Precision
■■
Industry Standard for Testing Electrical Apparatus such as Transformers,
Generators, and Cables
■■
Evaluates Integrity of High Voltage Substation Apparatus by Measuring
Power Factor/Tan Delta
■■
Measures Capacitance to Evaluate Physical Changes
■■
Measures Accurately in High Electrostatic and Electromagnetic Conditions
■■
Line Frequency Modulation Technology Eliminates Substation Interference
■■
Provided by Intellirent with an M4000 Clipboard and DTAF Pre-Configured
Laptop, Safety Strobe, Temperature / Humidity Transmitter
■■
Internal Field Calibration Reference Ensures Accurate Testing
■■
Built in Diagnostics Provide Information on Instrument Status
■■
Output Current to 300mA at 10kV (Total Output Power 3kVA) for Better
Replication of In-Service Conditions
■■
Optional Type C Resonator Increases Output Capacity
Doble M4000
12kV Power Factor Test Set
Megger CB-100
Low Voltage Capacitance and Insulation Power Factor Test Set
■■
Lightweight (21 lbs) and Portable
■■
Output of 26V at 100Hz Minimizes 60Hz Interference
■■
Performs UST and GST Configuration Testing
■■
Direct Reading of Capacitance and Dissipation Factor
■■
Simple Manual Interface
■■
Optimal for Transformer Dry Out
Megger CB-100
Low Voltage Capacitance and
Insulation Power Factor Test Set
ABB CB-10
Portable Capacitance Bridge
■■
Measures Capacitances without Making Any Disconnections Within
Capacitor Bank
■■
Optimal For Substation Power Factor Correction Capacitor Banks
■■
Complete Kit With Clamp On CT
Scale Factor
Capacitance Range
0.01
0-10 uF
0.1
10-100uF
1
100-1000 uF
ABB CB-10
Portable Capacitance Bridge
the test equipment answer
51
Switchgear and Circuit Breaker Test Equipment
EA Tech UltraTev +
Multifunction Partial Discharge Analyzer
■■
Quickly Identify Presence and Severity of Partial Discharge in Electrical
Apparatus
■■
Baselines Partial Discharge Activity to Direct Maintenance Activities
■■
Measures Surface Partial Discharge As Numerical dB Values and Measures
Internal Partial Discharge as Transient Earth Voltage (TEV) Values
■■
Gathers Partial Discharge Data For Comparison and Trending
■■
Automatically Grades Condition of TEV and Ultrasonic Values For Immediate
Analysis
■■
Simple and Intuitive Operation through Menu Driven, Multifunction Display
■■
Provided by Intellirent With UltraDish Parabolic Waveform Concentrator,
Flexible Sensor, External Microphone, Surface Contact Probe, and
Headphones for Surface, Internal or Overhead Applications
EA Tech UltraTev +
Multifunction Partial
Discharge Analyzer
Programma TM200 Universal Timer
■■
Rugged and Compact
■■
Simple and Intuitive Front Panel Controls
■■
Broad Range of Applications
■■
Contact or Voltage Trigger
Programma TM200
Universal Timer
52
888.902.6111
■
www.intellirentco.com
High Voltage PFT-303CM
30kV AC Hipot
■■
0-100mA Output Current; 3kVA (Capacitive Load)
■■
Analog Meters Display Current Leakage and Voltage Output
■■
20’ Shielded Output Cable with Alligator Clamp
■■
Approximately 75Lbs.
■■
Optimal for Low Capacitance Substation Apparatus such as Vacuum Bottles,
Breakers, Swtichgear, Bushings, Reclosers, Small Transformers and Motors
High Voltage PFT-303CM
30kV AC Hipot
High Voltage PFT-503CM and PFT-1003CM
50kV and 100kV AC Hipots
■■
0-60mA Output Current; 3kVA (Capacitive Load)
■■
Analog Meters Display Current Leakage and Voltage Output
■■
20’ Shielded Output Cable with Alligator Clamp
■■
Approximately 85Lbs.
■■
Optimal for Low Capacitance Substation Apparatus such as Vacuum Bottles,
Breakers, Swtichgear, Bushings, Reclosers, Small Transformers and Motors
■■
High Voltage PFT-1003CM Model Extends Voltage Range to 100kV (Includes
Separate High Voltage Tank)
High Voltage PFT-503CM and
PFT-1003CM 50kV and
100kV AC Hipots
Vanguard VBT-60 and VBT-80
Vacuum Bottle Test Set
■■
Automated Testing From 10kV to 60kV DC in 5kV Steps
■■
Selectable Dwell Time from 5 Seconds to 2 Minutes
■■
Digital Voltage and Current Display
■■
Failure Indicator LED
■■
Lightweight (10 Lbs)
■■
Display Indicates Test Voltage and mA Leakage During Test
■■
Selectable Overcurrent Limits of 100, 200 and 300mA
Vanguard VBT-60 and VBT-80
Vacuum Bottle Test Set
the test equipment answer
53
Cable and Bus Test Equipment
High Voltage PTS-75
75kV DC Hipot and Megohmmeter
■■
75kV Output Voltage at 10mA
■■
Continuously Adjustable Output Voltage
■■
Convenient and Compact Single Piece Design
■■
Dual Range Voltage Meter Scaled 0-37.5/75 kVDC
■■
Microamp and Megohm Meter Scales for both Leakage Current and
Resistance Measurements
■■
20’ Shielded Output Cable with Alligator Clip
■■
Switchable Guard/Ground Load Return Path
High Voltage PTS-75
75kV DC Hipot
and Megohmmeter
High Voltage PTS-80
80kV DC Hipot and Megohmmeter
■■
80kV Output Voltage at 10mA
■■
Continuously Adjustable Output Voltage
■■
Convenient and Compact Single Piece Design
■■
Dual Range Voltage Meter Scaled 0-40/80 kVDC
■■
Microamp and Megohm Meter Scales for both Leakage Current and
Resistance Measurements
■■
20’ Shielded Output Cable with Alligator Clip
■■
Switchable Guard/Ground Load Return Path
High Voltage PTS-80
80kV DC Hipot
and Megohmmeter
High Voltage PTS-130
130kV DC Hipot and Megohmmeter
High Voltage PTS-130
130kV DC Hipot
and Megohmmeter
54
■■
130kV Output Voltage at 10mA
■■
Continuously Adjustable Output Voltage
■■
Functional Two Piece Design
■■
High Voltage Tank is Approximately 82 Lbs, Controller is Approximately 35
Lbs.
■■
Dual Range Voltage Meter Scaled 0-70/130
■■
Microamp and Megohm Meter Scales for both Leakage Current and
Resistance Measurements
■■
20 Ft. EPR Output Cable Stays Flexible During Cold Weather Use
■■
Switchable Guard/Ground Load Return Path
888.902.6111
■
www.intellirentco.com
High Voltage PTS-200
200kV DC Hipot
■■
200kV Output Voltage at 5mA
■■
Continuously Adjustable Output Voltage
■■
Functional Two Piece Design
■■
High Voltage Tank is Approximately 150 Lbs, Controller is Approximately
35 Lbs
■■
Dual Range Voltage Meter Scaled 0-80/200
■■
Microamp and Megohm Meter Scales for both Leakage Current and
Resistance Measurements
■■
20 Ft. EPR Output Cable Stays Flexible During Cold Weather Use
■■
Switchable Guard/Ground Load Return Path
High Voltage PTS-200
200kV DC Hipot
High Voltage VLF-6022CM
60kV VLF Hipot
■■
Output Voltage is 60kV Peak at 5.5mA Max
■■
Adjustable Output Frequency of 0.1, 0.05, or 0.02 Hz (Sinusoidal)
■■
Capable of Testing 35kV Cable up to a Maximum Distance of 10 Miles
■■
Metering Includes Voltmeter ±0-60kVAC Peak, Charging Current Meter
0-100mA Peak, and Load Capacitance Meter 0-6µFarads
■■
20’ Shielded Output Cable
■■
Two Piece Design; Controller Is Approximately 75 lbs and the High Voltage
Tank Is Approximately 120lbs
High Voltage VLF-6022CM
60kV VLF Hipot
Phenix 6CP-100-7.5
50/100kV AC Hipot (7.5kVA)
■■
High VA Output Suitable For Applications Not Met by Smaller More
Portable Systems
■■
Capacity Optimal For Testing ISO-Phase Bus and Other Capacitive Loads
■■
Two Piece Design; Controller Approximately 50 Lbs and Tank
Approximately 190 Lbs
■■
240V Input
■■
Duty Cycle of 5 Minutes On / 15 Minutes off at 7.5kVA (Full Output), 15
Minutes On / 1 Hour Off at 5kVA and 1 Hour On / 1 Hour Off at 3kVA
■■
Output Capacity of 50kV at 7.5kVA for 150mA
■■
Output Capacity of 100kV at 7.5kVA for 75mA
■■
Bolt Type Output Terminals For Simple Connection To Test Apparatus
Phenix 6CP-100-7.5
50/100kV AC Hipot (7.5kVA)
the test equipment answer
55
Cable and Bus Test Equipment
HV Diagnostics HVA30
30kV VLF or DC Hipot
HV Diagnostics HVA30
30kV VLF or DC Hipot
■■
Lightweight (44 lbs) and Compact Single Piece Construction for Enhanced
Portability and Logistics
■■
Simple and Intuitive Menu Driven User Interface
■■
Appropriate for Cables, Capacitors, Switchgear, Transformers, Rotating
Equipment, Insulators and Bushings
■■
33kV (Peak) VLF at 0.1 Hz, 0.05 Hz or 0.02 Hz or DC Output
■■
Digital Metering Displays Voltage and Current (RMS or Peak), Capacitance,
Resistance, Duration and Flashover Voltage
■■
Manual or Automated Testing Sequences Based on Applicable Standards
■■
True Symmetrical Sinusoidal, Load Independent Output Waveforms Across Full
Load Range
■■
Short Circuit Protection with Active Arc Management
■■
Provides for VLF and DC Testing, Jacket/Sheath Testing and Fault Conditioning
■■
Internal Storage or Test Results
■■
Seamless Integration with HV Diagnostics TD30 Tan Delta System
HV Diagnostics TD30
30kV Tan Delta Measurement System
■■
Compact and Battery Operated
■■
Solid State, Air Insulated Design
■■
Configuration and Data Extraction Through Bluetooth® Connection
■■
Provided with Powerful and Intuitive Tan Delta Analysis Software with Tan
Delta Curve Display
■■
Real Time Display of Actual Waveform Output and Data
■■
Seamless Integration with HV Diagnostics HVA30 System
■■
Visual Indication of TD Levels
HV Diagnostics TD30
30kV Tan Delta
Measurement System
56
888.902.6111
■
www.intellirentco.com
HV Diagnostics HVA60
60kV VLF Hipot
■■
Single Piece Construction for Simplified Logistics
■■
Portable at 135 Lbs
■■
Simple and Intuitive Menu Driven User Interface
■■
62kV (Peak) VLF at 0.1 Hz, 0.05 Hz or 0.02 Hz or DC Output
■■
Capable of Testing 1µF at 0.1 Hz, 62kV Peak Voltage (Approximately
10,000 Feet of Cable) with Alligator Clip
■■
Appropriate for Cables, Capacitors, Switchgear, Transformers, Rotating
Equipment, Insulators and Bushings
■■
Digital Metering Displays Voltage and Current (RMS or Peak), Capacitance,
Resistance, Duration and Flashover Voltage
■■
True Symmetrical Sinusoidal, Load Independent Output Waveforms Across
Full Load Range
■■
Short Circuit Protection with Active Arc Management
■■
Provides for VLF and DC Testing, Jacket/Sheath Testing and Fault
Conditioning
■■
Manual or Automated Testing Sequences Based on Applicable Standards
■■
Internal Storage or Test Results
■■
Seamless Integration with HV Diagnostics TD60 Tan Delta System
HV Diagnostics HVA60
60kV VLF Hipot
HV Diagnostics TD60
60kV Tan Delta Measurement System
■■
Compact and Battery Operated
■■
Solid State, Air Insulated Design
■■
Configuration and Data Extraction Through Bluetooth® Connection
■■
Provided with Powerful and Intuitive Tan Delta Analysis Software with Tan
Delta Curve Display
■■
Real Time Display of Actual Waveform Output and Data
■■
Seamless Integration with HV Diagnostics HVA60 System
■■
Visual Indication of TD Levels
HV Diagnostics TD60
60kV Tan Delta
Measurement System
the test equipment answer
57
Cable and Bus Test Equipment
Baur Frida
30kV VLF Hipot and Tan Delta System
Baur Frida
30kV VLF Hipot and Tan Delta System
58
■■
Integrated VLF and Tan Delta Measurement In Single Unit Suitable For Testing Medium Voltage Cables to 15kV
(20kV For Tan Delta Diagnostics)
■■
Cable Testing According to IEEE 400-2001, IEEE P 400.2-2001, and VDE DIN 0276-620/621 (CENELEC HD 620/621)
■■
Cable Sheath Testing According To IEEE 433, IEC 60502 and VDE 0276-620
■■
Fully Automated Testing and Diagnostic Sequences
■■
Simple Menu Driven Setup for Manual Testing
■■
Quick and Easy Measurement Structure
■■
Baur PD Portable Adds Complete Diagnostic System
■■
Precision Measurement with Accuracy of 1 x 10-4
■■
Load Range of 10nF to 8uF
■■
Sinusoidal or Rectangle Wave Shape
■■
Automatic Load Discharge
■■
Onboard Results Storage and Management of Data with Included Software
■■
Provided by Intellirent With a Preconfigured Laptop Computer
■■
Includes Ground and Discharge Rod
■■
Lightweight (42 Lbs) and Compact for Simplified Transportation
888.902.6111
■
www.intellirentco.com
Let our equipment
meet you there
Whether you need equipment put on the next flight to an outage, or need it delivered on the other side
of the world, our equipment travels first class.
■■
Set up right, ready to go to work
■■
Custom cases and packaging for a secure trip
■■
Shipment tracking and controls in case we
get lost
■■
For longer trips, international
transportation documents for a quick
transition.
■■
Return shipment packging and labels, for
the return trip
■■
All to ensure you can do your job out of the
box ready to go
the test equipment answer
59
Cable and Bus Test Equipment
Doble M4000
12kV Power Factor Test Set
■■
Rugged Construction for Field Use With Laboratory Accuracy and Precision
■■
Evaluates Integrity of High Voltage Apparatus
■■
Measures Capacitance to Evaluate Physical Changes
■■
Measures Accurately in High Electrostatic and Electromagnetic Conditions
■■
Provided by Intellirent With DTAF and M4000 Preconfigured Laptop Computer
■■
Output Current to 300mA at 10kV for Better Replication of In-Service Conditions
Doble M4000
12kV Power Factor Test Set
Doble Type C
Resonating Inductor
■■
Increases Output Capacity of Doble M4000 for Cable and Other Capacitive
Apparatus
■■
No Software or Additional Hardware Required
■■
Available For Rental Individually or With Doble M4000
Doble Type C
Resonating Inductor
60
888.902.6111
■
www.intellirentco.com
Fluke FOM / FOS
Fiber Optic Power Meter and Light Source
■■
Economical Solution to Measuring DB Loss on Fiber Optic Cables
■■
Simple Setup and Operation; Plugs Into DMM
■■
Available with ST to ST, ST to FC, ST to SC, ST to SMA Adaptor Cables
■■
Available in 850, 1300 or 850/130 Light Sources
Fluke FOM / FOS
Fiber Optic Power Meter
and Light Source
AEMC 2620
AC Leakage Current Probe
■■
Locates Faults on High Current Loads
■■
High Sensitivity Enables Readings from 500 µA to 400A Using Two Ranges
■■
Capable of Measuring Leakage Current on Single or Three Phase systems
■■
Jaw Opening of 4.5”
■■
5’ Output Leads
AEMC 2620
AC Leakage Current Probe
Megger CFL535F
2 Channel Time Domain Reflectometer
■■
Appropriate for Any Cable with At Least Two Insulated Metallic Elements
(Including Sheath or Shield)
■■
Large Graphic Display Permits Comparison of Test Data for Simple Fault
Location
■■
Dual Input and Output Ports for Simultaneous Two Phase Measurement
■■
Internal Storage of 15 Tests
■■
Simple Download of Test Data with Included Software
Megger CFL535F
2 Channel Time Domain
Reflectometer
the test equipment answer
61
Cable and Bus Test Equipment
Metrel 3121
1kV Megger
■■
Large LCD Displays Bargraph and Insulation Resistance
■■
Measurement Ranges Up To 30GΩ
■■
Test Voltages from 50V to 1kV
■■
Measures Voltage and Frequency
■■
Pass/Fail Indication with Bright Red/Green LEDs
■■
Built In Battery Charger
■■
USB and RS-232 Ports For Results Download and Documentation
■■
Includes EuroLink PRO Software
Metrel 3121
1kV Megohmmeter
Metrel 2077
5kV Megohmmeter
Metrel 2077
5kV Megohmmeter
■■
Line or Battery Operated
■■
Automatic PI, DAR and DD Index Calculations
■■
Adjustable Measurement Timer from 1 Second to 30 Minutes
■■
Automatic Discharge of Capacitive Loads
■■
Digital and Bar Graph Display
■■
Measures Insulation to 5 TΩ
■■
Internal Memory Stores 1000 Measurements
Metrel 3201
5kV Megohmmeter with Fault Identifier
■■
Line or Battery Operated
■■
Automatic PI, DAR and DD Index Calculations
■■
Programmable Step Voltage and Withstand Voltage Functions to Assist in
■■
Diagnosing Faults
■■
Plots Real Time Resistance to Time
■■
Adjustable Measurement Timer From 1 Second to 30 Minutes
■■
Automatic Discharge of Capacitive Loads
■■
Internal Memory Stores 1000 Measurements
Metrel 3201
5kV Megohmmeter with
Fault Identifier
62
888.902.6111
■
www.intellirentco.com
AEMC 5050/5060
5kV Megohmmeter
■■
Line or Battery Operated
■■
Test Voltages of 500V, 1000V, 2500V and 5000V
■■
Insulation Measurement to 10TΩ
■■
Direct Measurement and Display of Resistance, Test Voltage, Test Duration,
Capacitance and Leakage Current
■■
Large Backlit Display
■■
Field Portable and Rugged
■■
Automatic Calculation of DAR, PI and DD
■■
AEMC 5060 Model Adds Results Storage and Download Capability
AEMC 5050/5060
5kV Megohmmeter
Metrel 3200
10kV Megohmmeter
■■
Line or Battery Operated
■■
Test Voltages from 500V to 10kV in 25V Steps
■■
Automatic Discharge of Capacitive Loads
■■
Digital and Bar Graph Display
■■
Measures resistance to 10 T ohms
Metrel 3200
10kV Megohmmeter
Megger 210415
15kV Megohmmeter
■■
Continuously Variable Test Voltage to 15kV
■■
Line Operated
■■
Available in 5kV or 15kV Models
■■
Suitable for PI, DAR and Step Voltage Testing
Megger 210415
15kV Megohmmeter
the test equipment answer
63
Cable and Bus Test Equipment
IUP Fault Wizard
Complete Fault Location System
IUP Fault Wizard
Complete Fault Location System
64
■■
Single Piece High Voltage Thumper, ARC Reflection TDR, DC Hipot and Low Voltage TDR
■■
Rugged and Reliable Compact Design (50 Lbs)
■■
Simplified Transportation Through Common Express Carriers
■■
One Man Portable
■■
Battery or Line Powered
■■
Optimal For Shielded High Voltage Cables
■■
Quickly Indicates Fault Type and Actual Distance to Fault in Feet
■■
Simple To Operate and Indentify Fault Location For Less Familiar Users
■■
Sophisticated Circuitry Ignores Transformer Reflection and Locks on Fault Location
■■
Locates Faults To 10,000 Ft. (Maximum Capacitance of 7uF)
■■
Variable Impulse Voltage (Thump) For Minimal Cable Damage
■■
Variable Velocity of Propagation For Precision Adjustment to Specific Application
■■
350 Joule Pulse Can Often Be Heard Above Ground
■■
Included Fault Wizard Software Enables Viewing and Recording Of Trace
888.902.6111
■
www.intellirentco.com
Aquatronics SDAD
Acoustical Detector
■■
Two Channel System Enables Directional Fault Identification
■■
Bright Backlit Display Indicates Distance To Fault and Fault depth
■■
Optional Stirrup Probes for Hard Surfaces
■■
Fault Centering Function Quickly Orients User To Fault Location
■■
Simple Operation For Less Familiar Users
■■
Provided by Intellirent as a Complete Kit
Aquatronics SDAD
Acoustical Detector
Amprobe AT-3000 Pro
Underground Locator
■■
Locates Underground Energized and Deenergized Wires, Cables and Pipes
■■
Power, Radio and Induced Signal Operation Modes
■■
Provided by Intellirent with the Amprobe GS-3000 Transmitter for Signal
Induction by Swamp, Direct Connection or by Signal Clamp Method
■■
Depth Measurement to 10’
Amprobe AT-3000 Pro
Underground Locator
Amprobe AT-2005
Wire and Circuit Tracer
■■
Traces energized and Deenergized Cables and Circuits in Walls or
Switchgear
■■
Locates Circuit Breakers Neutral and Ground Cables
■■
Pinpoints Shorts, Ground Faults and Broken Cables
■■
Provided by Intellirent as a Complete Kit, Including Receiver, Transmitter,
Transmitter for Open Tracing, Clamp On, Battery Booster, Battery Charger
and Lead Sets
Amprobe AT-2005
Wire and Circuit Tracer
the test equipment answer
65
Battery Test Equipment
Megger 246100B / BGFT
Battery Ground Fault Tracer
■■
Identifies and Locates Ground Faults in Ungrounded DC Systems
■■
Operates in Energized Systems
■■
Digital Display of Voltage and Current Amplitudes
■■
Optional Bridge Measurement of Fault Resistance (from 1 kΩ to 399 kΩ)
■■
Soft-Start Charging System Prevents Sensitive Relay Tripping
■■
Simplifies Fault Tracing by Identification of Fault Characteristics
■■
Includes Line Operated Transmitter and Battery Operated Receiver for
Remote Tracing
Megger 246100B / BGFT
Battery Ground Fault Tracer
SBS 2002
Digital Hydrometer
■■
Measures Specific Gravity of Electrolyte
■■
Internal Pump Draws Electrolyte into Sample Chamber
■■
Simple One-Button Test
■■
Automatic Temperature Compensation
SBS 2002
Digital Hydrometer
Cannon L121-250
Battery Load Bank
■■
Designed to Operate on 125V DC Systems
■■
Variable 0-250A DC
■■
On Board Fans and Temperature Controls
■■
Analog Current Meters
■■
Provided With The User’s Choice of Test Cables
■■
Powered by Battery Under Test
■■
Lightweight (50 Lbs) and Portable
Cannon L121-250
Battery Load Bank
66
888.902.6111
■
www.intellirentco.com
Alber CRT-400
Battery Analyzer
■■
Compact and Portable System Designed to Meet IEEE Standards for
Battery Testing
■■
Measurement and Results Not Affected by Ripple (AC Noise), Natural
Battery Capacitance or the Magnitude of Test Current
■■
Large, Backlit LCD
■■
Battery or Line Powered
■■
Measures and Records Cell Voltage, Internal Battery Resistance and
Intercell Resistance
■■
Internal Resistance Measurements Detect Failing Cells Before Failure
■■
Bluetooth Capable
■■
Onboard USB Flash Drive For Simple Transition of Data to PC
■■
Included Battery Analysis Software Identifies Problematic Cells, Creates
Reports and Archives Data
■■
irDA Communications Available for Communications With PC or Optional
Alber Hydrometer
■■
Test Battery Cells From 0-16V
■■
Includes Battery Test Clamps and Multiple Jaw Options
■■
Provided by Intellirent With Interchangeable Spike Probes
Alber CRT-400
Battery Analyzer
Fluke 2686
Battery Discharge Analyzer
■■
Provided by Intellirent as a Complete System with A Fluke DAQ
Pre-Configured Laptop Computer, Appropriate Input Modules and
Networking Configuration Components
■■
Prewired with Input Signal Leads as Required
■■
Measure up to 120 Signals Per Unit or 720 Signals by Combining 2686 Units
■■
Sampling Rate Adjustable from 1000 Readings/Second to 1 Reading/Hour
■■
Measure AC or DC Voltage, Resistance, Frequency, RTD and Thermocouples,
Thermistor and Current (including 4..20 loops)
■■
Simple Configuration and Setup
Fluke 2686 Universal
Battery Discharge Analyzer
the test equipment answer
67
Ground Test Equipment
Metrel 2088
Multifunction Ground Tester
Metrel 2088
Multifunction Ground Tester
■■
Three Wire 62% Fall of Potential Testing
■■
Four Wire Soil Resistivity Measurement
■■
Two Wire Point to Point Testing
■■
Clamp on Testing with Optional Current Probes
■■
Adjustable Output Voltage
■■
Internal Memory Stores 1000 Test Results
■■
Provided by Intellirent with Complete Ground Test Kit
Metrel 3123
Multifunction Hand Held Ground Tester
Metrel 3123
Multifunction Hand Held
Ground Tester
■■
Compact and Robust Design
■■
Three Wire 62% Fall of Potential Testing
■■
Four Wire Soil Resistivity Measurement
■■
Two Wire Point to Point Testing
■■
Selective (Contactless) Resistance Testing With Two Clamps
■■
Attached Rod Technique Testing
■■
Simple Clamp on Ground Testing
■■
USB Communications and Onboard Results Storage
■■
Provided by Intellirent With a Comprehensive Accessory Kit
AEMC 4620
Multifunction Ground Tester
■■
Three Wire 62% Fall of Potential Testing
■■
Four Wire Soil Resistivity Measurement
■■
Two Wire Point to Point Testing
■■
Rejects High Levels of Noise and Interference
■■
Push to Test Simplicity
■■
Provided by Intellirent With a Comprehensive Accessory Kit
AEMC 4620
Multifunction Ground Tester
68
888.902.6111
■
www.intellirentco.com
AEMC 3711 and AEMC 3731
Clamp On Ground Tester
■■
Measure Ground Rod and Grid Resistance without Driving Temporary
Ground Rods
■■
Verifies Quality of Grounding Connections/Bonds and Continuity of Ground
Loops
■■
Measures Ground Current
■■
Jaw Opening of 1.25”
■■
AEMC 3731 Includes a Display Hold Function
AEMC 3711 and AEMC 3731
Clamp On Ground Tester
Megger DET3TC/ICLAMP
Multifunction ART Ground Tester
■■
Simple One Button Operation
■■
Selectable Test Voltages (25 or 50V)
■■
0.01 to 2000 Ω Range
■■
Provided Complete with Leads and Temporary Ground Rods
■■
Automatic Noise Check and Rejection to 40V Peak-to-Peak
■■
Use In Conjunction with Megger IClamp for Attached Rod Technique
Testing
■■
Measure Leakage Current From 0.5 to 19.9A
■■
Use in Conjunction with Megger DET3TC For Complete Attached Rod
Technique Testing
■■
Enables Testing of On-Site Grounds Separately without Removing Utility
Connection
Megger DET3TC/ICLAMP
Multifunction ART Ground Tester
AEMC 6474
Multifunction Tower Ground Testert
■■
Versatile for All Types of Earth Resistance Measurements
■■
Resistivity Through Wenner and Schlumberger Methods
■■
Ground Coupling
■■
Ground Potential Measurement
■■
Continuity and Resistance
■■
Analyzes Frequency Behavior of Grounding Systems
■■
Rejection of Interference Voltages to 60V
■■
Automatic Calculation of Ground Coupling Coefficient and Ground
Resistivity
■■
Measurement and Analysis of Tow Leg Grounding
Full Results Recording
■■
Provided As Complete Kit for 3 Point, 4P or 4P Selective Method, Earth
Measurement With 2 Clamps, Resistivity, Earth Potential Measurement, DC
Resistance Measurement and Tower Ground Measurement
AEMC 6474 Multifunction Tower
Ground Tester
the test equipment answer
69
Meters and Meter Test Equipment
Radian RD-21-112
Watthour Standard
■■
Versatile Single Phase Standard with typical accuracy of 0.005% Throughout
Operating Range
■■
Integrated Analog to Digital Signal Converter For Real World Waveform
Measurement
■■
Four Quadrant Measurement Registers Forward and Reverse Energy Flow and
Documents Voltage, Current, Power and Energy (Active, Reactive, and Apparent)
■■
Optional Harmonic Analysis Through 50th Harmonic Order
■■
Built In Comparator Provides Automatic Calculation of Test Results
■■
BNC for Input/Gating, Pulse Outputs and Phase Synch or Analog Sense
■■
Intuitive Five Button User Interface for Setup of Measurement, Test Sequence,
and Harmonics
■■
Seamless Integration With Radian Accessories
Radian RD-21-112
Watthour Standard
Watthour Meter Testing Accessories
Type
Description
RM-1Hz
LED Pickup
RRKYZ-2
KYZ Adaptor (Form A and C Compatible)
RR-1H
Optical Pickup for LED
RR-DS (Suction Mount)
Meter Disk Sensor with Suction Cup Mount
RM-111
Comparator
RR-DS (Field Mount)
Meter Disk Sensor
RM-KYZ
Pulse Inputer
RR-1HV
Infrared Pickup
RR-KYZ
Pulse Input Adaptor
RM-1S
Remote Reset Switch
Watthour Meter
Testing Accessories
70
888.902.6111
■
www.intellirentco.com
Transdata 2130
Automated Watthour Meter Test Set
■■
Complete Automated Test Bench with Internal Multifunction Standard
■■
Typical Accuracy of +/- 0.025%
■■
Analog Input for Testing Watt, VAR, Current and Voltage Transducers
■■
Menu Driven Routines for Series and Per Phase Full Load, Light Load and
Power Factor Testing
■■
Built In Precision Current and Voltage Sources Provide Accurate and
Repeatable Test Results, Especially on Loss Compensated Meters
■■
Infrared LED Sensor, Disk Sensor and KYZ Relay Pulse Test Pickups Included
■■
Simplified for Field Applications, PC Controlled with Automated Menu
Driven Test Routines
■■
Active Test Methodology with Integrated Pure Sinusoidal Current and
Voltage Sources
■■
Test Ranges from 10mA to 30A and 0V to 600V
■■
Provided With Transdata 2130 Software
Transdata 2130
Automated Watthour
Meter Test Set
Fluke 124 and 125
Dual Input 40 MHz Oscilloscope
■■
Measure Current to 400A and Voltage to 1kV at 40 MHz
■■
High Resolution Monochrome Display
■■
Sample Rate of 25 MS/s
■■
Divisions of 5mV – 500V
■■
Scope Record Mode will Record 512 min/max Points Per Input
■■
Internal Memory of up to 20 Screens and Setups
■■
Provided by Intellirent with FlukeView Scopemeter Software
Fluke 124 and 125
Dual Input 40 MHz Oscilloscope
GW Instek GFG-8255A
Analog Function Generator and Frequency Counter
■■
Lightweight (Approx 5 Lbs) and Portable
■■
Frequency Range of .5Hz to 5Mhz
■■
Sine, Triangle, Square, Ramp TTL and CMOS Output
■■
External Voltage Controlled Frequency
■■
Variable DC Offset Control
■■
Integrated 6 Digit Counter and INT/EXT Functions up to 150MHz High
Resolution
■■
LIN/LOG Sweep Mode
■■
INT/EXT AM/FM Modulation
GW Instek GFG-8255A
Analog Function Generator
and Frequency Counter
the test equipment answer
71
Meters and Meter Test Equipment
Westinghouse PI-161
Analog Synch Scope
■■
Original Synchroscope
■■
Large Analog Meter Displays Phase Angle Differential Or Actual Phase Angle
To Reference
■■
0-360 Degree Indication of Phase Angle and Power Factor
■■
Indication of Leading or Lagging Power Factor
■■
Two Inputs at 15-480V or 1-30A
Westinghouse PI-161
Analog Synch Scope
Megger PMM-1
Universal Power Meter
■■
Light Weight (13 Lbs) and Simple to Use with Intuitive Controls
■■
Battery or Line Operated
■■
Measure Voltage, Current (100A Directly or Higher With Optional CTs), Phase
Angle, Power, Reactive Power, Frequency, Harmonics, and Time (Seconds or
Cycles)
■■
Onboard Datalogger Records Events
■■
Displays Three Phase Voltage, Current, Phase Angle, Power, Reactive Power,
Power Factor, and Frequency Simultaneously.
■■
Variable PT and CT Ratios for Display of Primary Values
Megger PMM-1
Universal Power Meter
Manta MTS-1030
Multifunction Power Meter and Timer
Manta MTS-1030
Multifunction Power
Meter and Timer
72
■■
Ten Simultaneous Measurements of Frequency, Phase Angle, AC/DC Voltage,
AC Current (200A Max), Power Factor, Watts, and VARS.
■■
On Board Timer Measures Cycles or Seconds Based on State or Contact
Changes
■■
Lightweight and Simple to Operate
■■
Phasor Display of AC Values
■■
Battery or Line Powered
888.902.6111
■
www.intellirentco.com
Sensorlink 6-920
High Voltage Recording Ammeter
■■
Provided With Three Open Sensor CTs
■■
Suitable For Use On 69kV Systems
■■
Sensor Opening of 1.3”
■■
+/-1% Accuracy to 1000A
■■
Provided With Softlink Software and IrDA Communications Cable
Sensorlink 6-920
High Voltage
Recording Ammeter
Sensorlink Amp LiteWire
Fiber Optic Coupled Ammeter
■■
Open Horseshoe Design Slips On and Off Conductor easily
■■
Simple One Button Operation
■■
Suitable For Use On Systems to 150kV
■■
Rejection of Stray Magnetic Fields
■■
0-2000A at +/- 1.5% Accuracy
■■
Fiber Optic Isolation of Signal To Coupling Device
■■
Analog Output For Waveform Analysis
■■
Spline Type Hotstick Connection
Sensorlink Amp LiteWire
Fiber Optic Coupled Ammeter
Sensorlink Volt Wire
Fiber Optic Coupled Voltmeter
■■
Measures Up To 40kV AC
■■
Simple One Button Operation
■■
Rejection of Stray Magnetic Fields
■■
Fiber Optic Isolation of Signal To Coupling Device
■■
Analog Output For Waveform Analysis
■■
Spline Type Hotstick Connection
Sensorlink Volt Wire
Fiber Optic Coupled Voltmeter
the test equipment answer
73
Meters and Meter Test Equipment
Amprobe PRM2
Phase Sequence Indicator
■■
Small and Lightweight (less than 1 Lb)
■■
Capable of Operation from 100 to 600V with a Frequency Range
from 45 to 65 Hz
■■
Powered by Apparatus Under Test
Amprobe PRM2
Phase Sequence Indicator
Ohmic BET300AD (L)
Biomedical Electrical Safety Test Set
■■
Tests Electrical Equipment and Medical Instruments To AAMI, UL and NFPA
Codes
■■
Measures Leakage Current, Voltage and Resistance
■■
Insulation Tests to 100V
■■
Open Ground and Neutral Test Switches
■■
Line, Voltage, Polarity and Receptacle Ground Test
■■
Polarity Switch for Test Receptacle
■■
Includes Isolated Power System Tests and Line Isolation Test
Ohmic BET300AD (L)
Biomedical
Electrical Safety Test Set
Bender LT-3000
Line Isolation Monitor Tester
■■
Simple and Intuitive Operation
■■
Determines Integrity of Isolated Systems and Grounding
■■
LIM and GFCI Testing
■■
Large LCD Display
■■
Operates on System Voltages up to 240V
■■
System Leakage Measurement
Bender LT-3000
Line Isolation Monitor Tester
74
888.902.6111
■
www.intellirentco.com
Signalcrafters 60
Impedance Magnitude Meter
■■
Designed Specifically for Line Trap Work
■■
Operates at 30kHz to 500kHz
■■
Direct Display of Impedance Magnitude for Quick and Simple Resonant
Frequency Determination
■■
Large Ruggedized Analog Meter
■■
Dual Range: .1-4kΩ and 1.0-40kΩ
■■
Field Portable and Battery Operated Lightweight (5 Lbs) Design
Signalcrafters 60
Impedance Magnitude Meter
Signalcrafters 90
High Level VLF Signal Source
■■
Designed Specific for Line Trap Work - Perform PLC Transmitter Emulations,
Line Tuner and Line Trap Tune Ups, System Line Ups and Receive Level
Checks
■■
Operates from 100 Hz to 500kHz for Audio Tones Up Through PLC
Frequencies
■■
Two Watt Output (50Ω Load) From Battery Power
■■
Nine Sweep Rates and 10 User Programmable Memory Registers
Signalcrafters 90
High Level VLF Signal Source
Signalcrafters 110
Frequency Selective Voltmeter
■■
Measures Voltage At Frequencies of 50 Hz to 5 Mhz
■■
Includes Signal Generator
■■
Onboard Storage and Recall Functions Permit Quick Configuration
■■
Selectable Bandwidths of 50Hz – 5Mhz, 3100Hz, 1950Hz, 100Hz and 25Hz
■■
Automatic Frequency Control Adjusts The Receiver to Center on the Actual
Input Frequency
■■
Max Hold Displays The Maximum Signal Level
■■
Adjustable Bridge Impedance from 1Ω to 999Ω
■■
AM, SSB (USB, LSB) and DSB Demodulator
Signalcrafters 110
Frequency Selective Voltmeter
the test equipment answer
75
Meters and Meter Test Equipment
Sencore LC53
LCR Meter
■■
Measures Capacitors from 1µF to 199,200 µF in 10 Ranges
■■
Measures Capacitor Leakage from 1mA to 9.99kmA
■■
Measures Inductance from 10 mA/mSec 1 mH to .1mA/mSec 9,990 mH
■■
Accuracy of ±2%
Sencore LC53
LCR Meter
Agilent 1732B
Handheld Capacitance / LCR Meter
■■
Quick, Basic LCR Measurements
■■
Hand Held with Simplified Controls
■■
Measures Resistance from .001 to 9.999MΩ
■■
Measures Capacitance from .01pF to 19.99mF
■■
Measures Inductance from 0.01uH to 999.9H
■■
Onboard Data Storage and Download Through Included Software and IR/
USB Communications Cable
Agilent 1732B
Handheld Capacitance / LCR Meter
Fluke 87 / 789
True RMS Multimeter
■■
Measure AC and DC Voltage, AC and DC Current, Resistance, Capacitance,
Frequency, Temperature and Conductance
■■
Industry Standard with Simple, Intuitive Operation
■■
Available With A Wide Variety of Input Modules for Pressure, Current to
2000A, Voltage to 40kV, Fiber Optic Measurement, Temperature, and more
■■
Available in Intrinsically Safe Version
■■
Fluke 187 Model Provides Datalogger Functionality with Software
■■
Fluke 789 Model Adds Capability to Source and Measure 4.20mA with 0.05%
Accuracy
Fluke 87 / 789
True RMS Multimeter
76
888.902.6111
■
www.intellirentco.com
HD Electric DVM II
50kV Phasing Kit
■■
Large Auto Ranging LCD Reads to 50kV
■■
Dual Stick Design Optimal for Phasing
■■
15’ Coiled Connection Lead
■■
Available with 3’ or 6’ Hot Sticks
HD Electric DVM II
50kV Phasing Kit
Summit 15kVP
15kV Probe Set
■■
Direct Connection to 15kV Systems
■■
Three Probes Included With Kit
■■
Threaded Extendable Hotsticks Included
■■
Hook Tip and Long Leads Maximize Convenience for Connections
Summit 15kVP
15kV Probe Set
TriState TSW45
5kV Phase Sequence Indicator
■■
Instant Phase Rotation Indication on Systems Up to 5kV
■■
LED Indication of Phase Rotation
■■
Open Phase Detection
TriState TSW45
5kV Phase Sequence Indicator
the test equipment answer
77
Inspection Equipment
Fluke Ti45
Infrared Camera with Fusion® Technology
■■
Merge Infrared and Real Light Images (Taken Through the Same Lens) for Image
Location Identification and Effective Reporting Through Fusion® Technology
■■
5” High Resolution Display Visible in Daylight
■■
Laser and Visible Light Output
■■
160 x 120 Focal Plane Array, Uncooled Microbolometer
■■
Three Times Digital Zoom
■■
Provided by Intellirent with Powerful and Compressive Fluke SmartView
Software which Permits User to Select Picture in Picture, Merged Thermal and
Visual Light Images, Full Thermal or Full Visual Images.
Fluke Ti45
Infrared Camera with Fusion®
Technology
Fluke Ti55
High Resolution Infrared Camera with Fusion® Technology
Fluke Ti55
High Resolution Infrared Camera
with Fusion® Technology
78
■■
Merge Infrared and Real Light Images (Taken Through the Same Lens) for
Image Location Identification and Effective Reporting Through Fusion®
Technology
■■
5” High Resolution Display Visible in Daylight
■■
Laser and Visible Light Output
■■
320 x 240 Focal Plane Array, Uncooled Microbolometer
■■
Sensitive to 0.05 ° C
■■
2x, 4x and 8x Digial Zoom
■■
Provided by Intellirent with Powerful and Compressive Fluke SmartView
Software which Permits User to Select Picture in Picture, Merged Thermal
and Visual Light Images, Full Thermal or Full Visual Images.
888.902.6111
■
www.intellirentco.com
Fluke Ti32
Infrared Camera with IR Fusion® Technology
■■
Field Rugged and Optimized For Use In Harsh Environments
■■
Tested To Withstand a 6’ Drop
■■
Convenient Pistol Grip Design
■■
Crisp, Clear Images With a 320 x 240 Sensor
■■
Fluke’s NETD Thermal Sensitivity Identifies Minute Differences In
Temperatures
■■
Merge Infrared and Real Light Images for Image Location Identification
and Effective Reporting Through IR Fusion® Technology
■■
Optional Wide Angle and Telephoto Lenses
■■
Field Replaceable Batteries for Maximum Flexibility
■■
Intuitive Three Button Menu
■■
Voice Recording
■■
Emissivity Correction, Single Hand Focus Capability, and Temperature
Compensation
■■
Provided by Intellirent with Powerful and Comprehensive Fluke SmartView
Software
Fluke Ti32
Infrared Camera with IR
Fusion® Technology
UE Systems UltraProbe 100
Ultrasonic Inspection System
■■
Appropriate for Leak Detection or Corona Detection
■■
Easy to Use
■■
Visual and Audible Indication of Amplitude
■■
8 Position Sensitivity Selection
■■
Provided by Intellirent with Two Focusing Probes, Microphone Sensor and
Contact Sensor with Extensions
UE Systems UltraProbe 100
Ultrasonic Inspection System
the test equipment answer
79
Inspection Equipment
EA Tech UltraTev +
Multifunction Partial Discharge Analyzer
EA Tech UltraTev +
Multifunction Partial Discharge Analyzer
80
■■
Quickly Identify Presence and Severity of Partial Discharge in Electrical Apparatus
■■
Baselines Partial Discharge Activity to Direct Maintenance Activities
■■
Measures Surface Partial Discharge As Numerical dB Values and Measures Internal Partial Discharge as Transient Earth
Voltage (TEV) Values
■■
Gathers Partial Discharge Data For Comparison and Trending
■■
Automatically Grades Condition of TEV and Ultrasonic Values For Immediate Analysis
■■
Simple and Intuitive Operation Through Menu Driven, Multifunction Display
■■
Provided by Intellirent With UltraDish Parabolic Waveform Concentrator, Flexible Sensor, External Microphone, Surface
Contact Probe, and Headphones for Surface, Internal or Overhead Applications
888.902.6111
■
www.intellirentco.com
General DCS-1800
Flexible Borescope
■■
Available with 6 Ft or 16 Ft Probe
■■
User Adjustable Viewing Angle
■■
User Configured Field of View from 34 to 56 degrees
■■
0.4 to 2.4 In Depth of Field
■■
Wireless Console and Viewer
■■
Onboard SD Memory Card
■■
Integrated Microphone Records User’s Voice Notes
■■
Still Image or Video Capture
■■
Battery Operated
General DCS-1800
Flexible Borescope
Extech 407736
Sound Level Meter
■■
Time Weighting Curves for Slow (550ms) and Fast (55ms)
■■
Frequency Weighting Curves Type A and Type C
■■
Programmable Integrating Time with Real Time Calendar
■■
Datalogger Records 32,000 Records at User Specified Interval
Extech 407736
Sound Level Meter
Extech EA30
Lightmeter
■■
Peak Function Captures Light Pulse
■■
HOLD and MIN/MAX Functions
■■
Remote Sensor
■■
Measures Foot Candles to 40k or Lux to 400k
Extech EA30
Lightmeter
the test equipment answer
81
Inspection Equipment
Fluke 63
Infrared Thermometer
■■
Measure -25 to 1000 °F with Distance to Spot Ratio of 12:1
■■
Backlit Display Holds Minimum, Maximum and Average Readings
■■
Emissivity Fixed at .095
■■
Accuracy better than ±3 °F Throughout most Ranges
Fluke 63
Infrared Thermometer
Extech 480823
Single Axis EMF/ELF Meter
■■
Measures Electromagnetic Field Radiation Levels
■■
Displays EMF level in Milligauss or Microtesla
■■
Accuracy of 4% Over Operating Range of 0.1 to 199.9mG
■■
ELF Frequency Bandwidth of 30Hz to 300Hz
Extech 480823
Single Axis EMF/ELF Meter
Ametek 1726
Dual Function Tachometer
■■
Low Maintenance, Easy to Use and Compact
■■
Optimal for Non-Contact and Contact Requirements
■■
Built in Photoelectric Pickup Operates to a Distance of 12 Inches
■■
Accuracy to ±0.025% of Reading for Angular Readings and ±0.2% for Linear
Measurements
Ametek 1726
Dual Function Tachometer
82
888.902.6111
■
www.intellirentco.com
Monarch Nova Strobe
Strobe Tachometer
■■
Digital Display with Fine and Coarse Flash Rate Adjustment
■■
30-14,000 Flashes Per Minute
■■
Internal Phase Shifting
■■
Times Two and Divide by Two for Immediate Check of Actual RPM versus
Harmonics
■■
Store and Recall Six Memory Values
■■
Provided by Intellirent with Spare Bulbs, Case and Charger
Monarch Nova Strobe
Strobe Tachometer
SPM VIB-10 and VIB-11
Vibration Meter
■■
Measures Vibration Velocity in Inches/Second with Accuracy of ±2%
■■
Resolution of 0.01 Inches/Second
■■
Accelerometer Provided with Magnetic Mount or Probe
■■
SPM VIB-10 Model Displays mm/Second
SPM VIB-10 and VIB-11
Vibration Meter
Rion VM-82
Vibration Analyzer
■■
Single Axis Meter for Acceleration, Velocity and Displacement
■■
Large LCD Displays Bargraph Style and Numeric Values
■■
Onboard Memory Records up to 1000 Data Points for Results
Documentation with Included Software and Communications Cable
■■
30 Hours of Continuous Use with Disposable Batteries
Rion VM-82
Vibration Analyzer
the test equipment answer
83
Motor and Rotating Apparatus Test Equipment
PDMA MCEMax
5kV Motor Analyzer
■■
Portable and Battery Powered
■■
Monitors Power Circuit, Insulation, Stator, Rotor and Air Gap
■■
Variable Test Voltage from 250V to 5kV
■■
Automatic IR, PI, DAR and Step Voltage Tests
■■
Measures Insulation Resistance to 3TΩ
■■
Precision Resistance Measurement From 10uΩ to 2000Ω Using Four-Wire
Bridge
■■
Measures Capacitance (pF) and Inductance (mH)
■■
Provided by Intellirent with MCEGold Preconfigured Laptop Computer
PDMA MCEMax
5kV Motor Analyzer
Doble M4000
12kV Power Factor Test Set
Doble M4000
12kV Power Factor Test Set
■■
Rugged Construction for Field Use with Laboratory Accuracy and Precision
■■
Industry Standard for Testing Electrical Apparatus such as Transformers,
Generators, and Cables
■■
Evaluates Integrity of High Voltage Substation Apparatus by Measuring Power
Factor/Tan Delta
■■
Measures Capacitance to Evaluate Physical Changes
■■
Measures Accurately in High Electrostatic and Electromagnetic Conditions
■■
Line Frequency Modulation Technology Eliminates Substation Interference
■■
Automated Testing Procedures Through DTA or Manual Through M4000 Clipboard
■■
Provided by Intellirent with an M4000 Clipboard and DTAF Pre-Configured Laptop,
Safety Strobe, Temperature / Humidity Transmitter
■■
Internal Field Calibration Reference Ensures Accurate Testing
■■
Built in Diagnostics Provide Information on Instrument Status
■■
Output Current to 300mA at 10kV (Total Output Power 3kVA) for Better
Replication of In-Service Conditions
■■
Optional Type C Resonator Increases Output Capacity
Doble Type C
Resonating Inductor
■■
Increases Output Capacity of Doble M4000 for Generators and Other
Capacitive Apparatus
■■
No Software or Additional Hardware Required
■■
Available For Rental Individually or With Doble M4000
Doble Type C
Resonating Inductor
84
888.902.6111
■
www.intellirentco.com
Fluke 810
Full Function Vibration Analyzer
■■
Onboard Identification and Location of Common Mechanical Faults
(Bearings, Misalignment, Unbalance and Looseness)
■■
Graded Fault Severity For Maintenance Prioritization
■■
Integrated 2GB Memory for Complete Machine Analysis
■■
Integrated Laser Tachometer
■■
Tri Axial Analysis of Acceleration, Displacement and Velocity
■■
Document and Trend Results With Included Software
■■
Suitable For Analysis of Rotating Equipment from 200 to 12,000 RPM
■■
Simple and Intuitive Setup, Measurement and Diagnosis
Fluke 810
Full Function Vibration Analyzer
Raytech WR-50-12
Winding Resistance Test Set With Demagnetization
■■
50A Outpu for testing large geenrators and motors with repeatable
readings
■■
Automatically Demagnetizes Winding upon Test Completion
■■
2 Measurement Channels and Onboard Printer Convenience
■■
Bright Touchscreen Interface or Full Computer Control
■■
Color Coded Connections and Simple interface for Fast Familiarization
■■
Automatic Discharge Circuit
■■
Optional Heat Run Software and Three RTD Inputs
Raytech WR-50-12
Winding Resistance Test Set
With Demagnetization
Metrel 3200
10kV Megohmmeter
■■
Line or Battery Operated
■■
Test Voltages from 500V to 10kV in 25V Steps
■■
Automatic Discharge of Capacitive Loads
■■
Digital and Bar Graph Display
■■
Measures Insulation to 10 TΩ
Metrel 3200
10kV Megohmmeter
the test equipment answer
85
Electrical Safety and Hospital Test Equipment
RKI GX-2009
Four Gas Analyzer
■■
Three Operating Modes: Normal, Bar Hole and Leak Check
■■
Simultaneous Detection of LEL, O2, H2S and CO
■■
Internal Sample Pump Draws Air Through Included 40’ Hose
■■
Alarms and Vibrates When Potential Danger Thresholds Are Reached
■■
Optimal for Confined Space Entry or Remote Monitoring
■■
RKI GX-2003 model adds internal sample pump
RKI GX-2009
Four Gas Analyzer
Bender LT-3000
Line Isolation Monitor Tester
■■
Simple and Intuitive Operation
■■
Determines Integrity of Isolated Systems and Grounding
■■
LIM and GFCI Testing
■■
Large LCD Display
■■
Operates on system voltages up to 240V
■■
System Leakage Measurement
Bender LT-3000
Line Isolation Monitor Tester
Ohmic BET300AD (L)
Biomedical Electrical Safety Test Set
■■
Tests Electrical Equipment and Medical Instruments To AAMI, UL and NFPA
Codes
■■
Measures Leakage Current, Voltage and Resistance
■■
Insulation Tests to 100V
■■
Open Ground and Neutral Test Switches
■■
Line, Voltage, Polarity and Receptacle Ground Test
■■
Polarity Switch for Test Receptacle
■■
Includes Isolated Power System Tests and Line Isolation Test
Ohmic BET300AD (L)
Biomedical
Electrical Safety Test Set
86
888.902.6111
■
www.intellirentco.com
Vitrek V61
5kV AC / 6kV DC Hipot
■■
Fully Automated Testing Through Front Panel or Computer Control
■■
5kV AC Output with 20mA Sourcing
■■
6kV DC Output with 7.5mA Sourcing
■■
Digital Current and Voltage Display
■■
Programmable Ramp and Dwell Time
■■
Arc Detection
Vitrek V61
5kV AC / 6kV DC Hipot
HD Electric DVM II
50kV Phasing Kit
■■
Large Auto Ranging LCD Reads to 50kV
■■
Dual Stick Design Optimal for Phasing
■■
15’ Coiled Connection Lead
■■
Available with 3’ or 6’ Hot Sticks
HD Electric DVM II
50kV Phasing Kit
Amprobe TIC300HV and H10A
AC Voltage Detector with Extendable Hot Stick
■■
30V to 121kV Tic Tracer
■■
Audible Alarm when Voltage is Present
■■
Available with Amprobe H10A Extendable 6’ Hotstick
Amprobe TIC300HV and H10A
AC Voltage Detector with
Extendable Hot Stick
the test equipment answer
87
Process Calibration Equipment
Fluke 744
Documenting Multifunction Process Calibrator with Hart Interface
■■
Simultaneous Input and Output
■■
Optional Pressure Modules Available in All PSIA, PSID, and PSIG Ranges
■■
Measures and Sources Thermocouple and RTDs
■■
Calibrates Loops, Voltage, mV, and Frequency
■■
Measures Resistance and Provides Loop Power
■■
Hart Functionality
■■
Optional DPC Track Software Manages Calibration Recordkeeping Data
■■
Internally Records and Documents Calibrations and Data
Fluke 744
Documenting Multifunction Process
Calibrator with Hart Interface
Fluke 725
Multifunction Process Calibrator
■■
Simultaneous Input and Output Visible on Split Screen
■■
Measures and Sources Thermocouple and RTDs
■■
Calibrates Loops, Voltage, mV, and Frequency
■■
Measures Resistance and Provides Loop Power
■■
Optional Pressure Modules Available in all PSIA, PSID, and PSIG Ranges
■■
Fluke 725EX Model is Intrinsically Safe
Fluke 725
Multifunction Process Calibrator
Fluke 87 / 789
True RMS Multimeter
■■
Measure AC and DC Voltage, AC and DC Current, Resistance, Capacitance,
Frequency, Temperature and Conductance
■■
Industry Standard with Simple, Intuitive Operation
■■
Available With A Wide Variety of Input Modules for Pressure, Current to
2000A, Voltage to 40kV, Fiber Optic Measurement, Temperature, and more
■■
Available in Intrinsically Safe Version
■■
Fluke 187 Model Provides Datalogger Functionality with Software
■■
Fluke 789 Model Adds Capability to Source and Measure 4.20mA with 0.05%
Accuracy
Fluke 87 / 789
True RMS Multimeter
88
888.902.6111
■
www.intellirentco.com
Fluke Pressure Modules
■■
Display Pressure to Fluke 744 or 725
■■
Differential, Gauge, Absolute, Vacuum, Dual and High Pressure Models
■■
Accuracy from 0.025%
Model
Range
Model
Range
700P00
1” H20 Differential
700P30
5K PSI High
700P01
10” H20 Differential
700P31
10K PSI High
700P02
1 PSID Differential
700PA3
5 PSIA Absolute
700P03
5 PSID Differential
700PA4
15 PSIA Absolute
700P04
15 PSID Differential
700PA5
30 PSIA Absolute
700P05
30 PSI
Gauge
700PA6
100 PSIA Absolute
700P06
100 PSI Gauge
700PD2
+/- 1 PSI Dual
700P07
500 PSI Gauge
700PD3
+/- 5 PSI Dual
700P08
1000 PSI Gauge
700PD4
+/- 15 PSI Dual
700P09
1500 PSI Gauge
700PD5
-15/30 PSI Dual
700P22
1 PSID Differential
700PD6
-15/100 PSI Dual
700P23
5 PSID Differential
700PD7
-15/200 PSI Dual
700P24
15 PSID Differential
700PV3
-5 PSI Vacuum
700P27
300 PSI Gauge
700PV4
-15 PSI Vacuum
700P29
3K PSI High
Fluke Pressure Modules
Hart 375
Smart Communicator
■■
Communicate with and Adjust HART®, Fieldbus and Thousands of Other
Devices
■■
Field Upgradeable and Intrinsically Safe
■■
Large LCD Touch Screen
■■
Menu Driven for Ease of Use and Quick Familiarization
■■
32MB of Application Memory and Removable SD Card for Device
Descriptions
Hart 375
Smart Communicator
the test equipment answer
89
Process Calibration Equipment
Hand Pumps
Vacuum, Pneumatic,
Dual Range and Hydraulic
■■
Vacuum, Pneumatic, Dual Range and Hydraulic Hand Pumps for Any
Application
■■
Provided by Intellirent complete with Tubing and Fitting Kits
■■
All Pumps are Available with an Appropriately Ranged Test Gauge for a
Complete Pressure Calibration Kit
■■
Martel MECP500
Vacuum to 500PSI Pneumatic Hand Pump
■■
Reliable, No Maintenance Pneumatic Hand Pump
Generates -28” Hg (-12 PSI) to 500 PSI in Real World Conditions
Easy to Use
Fine Release Bleed Value and Fine Adjust Vernier
■■
Martel MECP 100/V
Vacuum to 100PSI Pneumatic Hand Pump
■■
Reliable, No Maintenance Pneumatic Hand Pump
Generates -28” Hg (-12 PSI) to 100 PSI in Real World Conditions
Simple, Compact Design
Fine Release Bleed Value and Fine Adjust Vernier
■■
Martel MECP 10,000
10K PSI Hydraulic Hand Pump
■■
Reliable, Hydraulic Fluid or Water Hand Pump
Generates 0-10K PSI in Real World Conditions
Fully Adjustable Stroke Control
Fine Release Bleed Value and Fine Adjust Vernier
■■
Ralston HPGV
3000 PSI Hydraulic Hand Pump
■■
Generates 3000 PSI in Real World Conditions
Two Outlet Ports with Fine Adjustment
■■
Ralston DP0V
Vacuum to 100 PSI Pneumatic Hand Pump
■■
Generate -25 “ Hg to 100 PSI In the Same Pump
Switch from Pressure to Vacuum by Twisting A Knob
Two Outlet Ports, Large Voltage Fine Adjustment Knob
Vent and Bleed Valve
Fluke 771
Clamp on Loop Calibrator
■■
Measure 4-20mA Signals Without Breaking Loops
■■
1/4” Jaw Opening
■■
0.2% Accuracy
■■
Resolution of 0.01 mA
Fluke 771
Clamp on Loop Calibrator
90
888.902.6111
■
www.intellirentco.com
Martel PI Gauges
Digital Test Gauges
■■
± 0.05% F.S. Temperature Compensated Accuracy
■■
Displays in Eighteen Standard Pressure Units
■■
Displays Ambient Temperature
■■
Min/Max Recall
■■
Battery Operated
■■
User Configurable Sample Rate Maximizes
Battery Life
■■
■■
Ruggedized Case for Extended Use and Reliability
Available from Intellirent in Multiple Ranges:
Model
Range
PI-100
0-100 PSI
PI-1000
0-1000 PSI
PI-30
0-30 PSI
PI-300
0-300 PSI
PI-C/V
-15 (Vacuum) -30 PSI
PI-500
0-500 PSI
PI-3000
0-3000 PSI
Martel PI Gauges
Digital Test Gauges
Crystal XP2I and IS33
Digital Test Gauges
■■
■■
■■
■■
■■
■■
Model
Range
XP2i-15
15 PSI
Accuracy of 0.1%
XP2i-30
30 PSI
XP2i-100
100 PSI
Multiple Pressure Units
XP2i-300
300 PSI
XP2i-500
500 PSI
XP2i-1K
1,000 PSI
XP2i-1K
1,000 PSI
XP2i-2K
2,000 PSI
XP2i-3K
3000 PSI
XP2i-5K
5000 PSI
XP2i-10K
10,000 PSI
Rugged and Dependable
Pressure Ranges from 15 to 10K PSI
Battery Operated
1/4” NPT Connection
Crystal XP2I and IS33
Digital Test Gauges
Ashcroft 1305D
Deadweight Tester
■■
Generates Pressures to 0.1% of Reading
■■
Range of 10,000 PSI for a Wide Variety of Applications
■■
Two Piston Construction, Low Pressure (from 15 to 2,000 PSI) and High
Pressure (from 75 to 10,000 PSI)
Ashcroft 1305D
Deadweight Tester
the test equipment answer
91
Process Calibration Equipment
Model
Description
Altek 820
Multifunction Process Calibrator
Altek 334A
Loop Calibrator
Altek 422
Thermocouple Calibrator
Altek 311A
RTD Calibrator
Altek 942
Frequency Calibrator
Model
Description
PIE 334
Loop Calibrator
PIE 532
Loop and Voltage Calibrator
PIE 541
Frequency Calibrator with Totalizer
PIE 211
RTD Calibrator
PIE 525
Thermocouple and RTD Calibrator
PIE 322
Thermocouple Calibrator
Altek Calibrators
PIE Calibrators
Transcat 7010T
RTD Substitution Box
Transcat 7010T
RTD Substitution Box
92
■■
Real Four Wire Substitution of RTDs at 0.01% Accuracy
■■
Six Decades for Precision Adjustment
■■
10 to 111.110Ω
■■
Two, Three or Four Wire Connections
888.902.6111
■
www.intellirentco.com
Isotech Quick-Cal 550
Dry Block Calibrator
■■
Low and High Temperature Quick Cal Models Available
■■
Temperature Ranges from -12°C to 350°C
■■
9 Minutes to Heating and Cooling Times to Obtain Temperature Set Point
■■
Lightweight at only 3.3lbs
■■
Interchangeable and Custom Inserts are Available
■■
Accuracy for the Low Temp Quick-Cal is ±0.1 to ±0.4°C, Stability is ±0.05°C
■■
Accuracy for the High Temp Quick-Cal is ±0.1 to ±0.4°C, Stability is ±0.05°C
Isotech Quick-Cal 550
Dry Block Calibrator
Isotech Jupiter
Dual Range Dry Block Calibrator
■■
Generates Temperatures From 35°C to 650°C
■■
Large Calibration Volume
■■
Heats From 30°C to 650°C in 20 Minutes
■■
Cools From 650°C to 150°C in 60 Minutes
■■
Computer Interface For Programmable Settings
■■
Optional Surface Sensor and Blackbody
Isotech Jupiter
Dual Range Dry Block Calibrator
Isotech ISIS
Cooled Dry Block Calibrator
■■
Generates Temperature from -100°C to 40°C
■■
Cools to -20°C in 20 Minutes
■■
Cools To -100°C in 90 Minutes
■■
Stability of +/-0.03°C at 0°C
Isotech ISIS
Cooled Dry Block Calibrator
the test equipment answer
93
Index by Application
Index by Application
ABB Secondary Injection Test Set
Absolute Pressure Module
AC Hipot
89
53, 55
EMax Test Set
41
Entelliguard Test Set
44
Fault Locator
61, 64, 65, 66
61
AC Pro Test Set
47
Fiber Optic Light Source and Power Meter
Acoustical Detector
65
Flexible Current Probe
2-7
92
Frequency Calibrator
92
Frequency Selective Voltmeter
75
Function Generator
71
Altek
Amptector Test Set
Astromed
42, 43
6, 7
Attached Rod Technique Ground Tester
69
GE Secondary Injection Test Set
14
Battery Analyzer
67
GPS Antenna
17
Battery Discharge Analyzer
67
Ground Tester
Battery Ground Fault Tracer (BGFT)
66
Hand Pump
90
Battery Hydrometer
66
Hart Communicator
89
Battery Impedance Test Set
67
High Current Test Sets
Battery Load Bank
66
High Level VLF Signal Source
Biomedical Safety Analyzer
74
High Voltage Circuit Breaker Test Equipment
Calibrator
92
High Voltage Current Probe
73
Capacitance and Insulation Analyzer
19
High Voltage Current Recorder
73
19
High Voltage Probe
Capacitance Bridge
Chart Recorder
6, 7
68, 69
34-39
75
48-53
73
54-58
Hipot
90
Circuit Breaker Timer and Travel Analyzer
48
Hydraulic Hand Pump
Circuit Tracer
65
Impedance Magnitude Meter
Clamp On Ground Resistance Meter
69
Impedance Meter
22, 76
Clamp On Loop Calibrator
90
Infrared Camera
78, 79
17
Infrared Thermometer
Communications Adaptor
CT Test Set
22, 29
Insulation Analyzer
75
82
18,19, 32, 33
Kyle/MET Test Set
44
Cutler Hammer Secondary Injection Test Set
42, 43
LCR Meter
76
Data Acquisition System
6, 7, 8
Leakage Current Meter
61
Current Probe
DC Hipot
7, 73
54 - 58
Leakage Reactance
18, 22
Dead Weight Tester
91
Light Meter
81
Decade Box
92
Line Carrier/Trap Tuning Equipment
75
Dewpoint Analyzer
28
Line Isolation Monitor Tester
74
Dielectric Response Analyzer
20
Linear Transducer
48
Differential Pressure Module
89
Load Bank (Battery)
66
Digitrip Power Supply
43
Loop Calibrator
Digitrip Test Set
42, 43
Low Voltage Circuit Breaker Test Equipment
92
30-47
42
49
Magnum DS Adaptor
DLRO
22, 30, 31
Magnum DS Test Set
Doble
18
Megohmmeters
Documenting Multifunction Process Calibrator
88
Merlin Gerin Secondary Injection Test Set
45
MicroLogic Test Set
45
DILO
Dranetz
3
42
32, 33
44
Dry Block Calibrator
93
MicroVersaTrip Test Set
DS and DS II Adaptor
42
Motor Analyzer
84, 85
Dual Pressure Module
89
Motor Rotation Indicator
11, 84
MPS Test Set
41
ECS and SST Test Set
44
MPSC 2000 Test Set
42
Electrical Safety and Hospital Test Equipment
86
MPS-C Test Set
41
Multi Gas Analyzer
86
Ductor
Electrical Test Instruments (Manufacturer)
94
41, 42
30, 31
36, 37
888.902.6111
■
www.intellirentco.com
Multifunction Process Calibrator
88
Sound Level Meter
81
Multimeter
76
Square D Secondary Injection Test Set
45
Static Trip II and III Test Set
46
Multitap CT Test Set
29
STR Test Set
45
Oil Dielectric Test Set
27
Strobe Tachometer
83
43
Sudden Pressure Relay Test Kit
28
Multipoint Ground Tester
Optimizer
Oscilloscope
68, 69
9, 11
47
SureTrip Adaptor
19, 20
Partial Discharge Analyzer
21
Sweep Frequency Response Analyzer
PDMA
84
Synch Scope
Phase Angle Meter
72
Tachometer
82, 83
Phase Sequence Indicator
11
Tan Delta Analyzer
56-58
Phasing Kit
77
Test Gauge
91
Pneumatic Hand Pump
90
Thermocouple Calibrator
92
23
Three Phase Relay Test Set
Polarity Checker
Power Factor Test Set
Power Meter
Power Multimeter
Power Quality Analyzer
72
12-15
Three Phsae TTR
27
2-11
Thumper
64
72
Tic Tracer
18, 19, 23
2-7, 9
87
Time Domain Reflectometer
64, 61
Power Sensor Test Set
44
Timer
52
Power Shield Test Set
41
Tower Ground Tester
69
Transducer
48
Power Supply
22, 50
Pow-R-Trip Test Set
43
Transformer Impedance Meter
22
Pressure Gauges (Test Gauges)
91
Transformer Ohmmeter
24
Pressure Modules
89
Travel Analyzer
48
Primary Injection Test Set
Primary Test System
Process Calibration Equipment
Relay Test Jacks (Paddles)
Relay Test Set
22, 34-39
22
88-93
17
12-17
79
UE Systems
79, 80
Ultrasonic Detector
Underground Cable Locator and Tracer
65
Utility Relay Secondary Injection Test Set
47
Vacuum Bottle Test Set
53
90
Resonating Inductor
60
Vacuum Hand Pump
Rotary Transducer
48
Vacuum Pressure Module
89
Rotating Equipment Analyzer
85
Vibration Analyzer
83, 85
RTD Calibrator
92
Vibration Meter
83, 85
SACE Test Set
41
VL Test Set
47
Satin American ETC Test Set
46
VLF Hipots
55-58
Satin American ETC.12 Adaptor
46
Voltage Detector
87
SB Power Supply
47
Voltage Probe
77
46
Watthour Meter Pickups
70
SB Test Set
Secondary Injection Test Sets
40-47
71
Watthour Meter Test System
70, 71
Seltronic Test Set
42
Watthour Standard
Series C Test Set
42
Westinghouse Secondary Injection Test Set
SF6 Connection Adaptors
49
Winding Resistance Test Set
SF6 Detector
49
WL Test Set
46
SF6 Purity Analyzer
49
Z Meter
76
SF6 Regulator
49
Siemens Secondary Injection Test Set
46
Single Phase Relay Test Set
Single Phase TTR
Smart Communicator
47
22, 24, 25
16
22, 26, 27
89
the test equipment answer
95
Index by Manufacturer
Index by Manufacturer
96
Manufacturer
Model
Page
Manufacturer
Model
ABB
ABB
ABB
ABB
ABB
ABB
ABB
ABB
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
AEMC
Agilent
Alber
Alber
Altek
Altek
Altek
Altek
Altek
Ametek
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Amprobe
Aquatronics
Ashcroft
Astromed
Astromed
Astromed
Astromed
Astromed
Astromed
Astromed
Astromed
Astromed
504
505
606
607
BTSB
CB-10
PR010/T
TT1
2620
3711
3731
3945
4620
5050
5060
6240
6250
6474
8335
JM865A
MN103
MN254
MR410
MR521
SL201
SR600
1732B
CellCorder
CRT-400
422
820
942
311A
334A
1726
ACF-3000-DMA
AT-2005
AT-3000 Pro
CT600
DMCT
DMCT100
DM-II Plus
DM-III MultiTest
DM-III MultiTest Flex
Flex 33
H10A
PRM-2
TIC300HV
SDAD
1305D-100
DASH 18X
DASH 8Xe
DASH 8XPM
HDV1
IBR1
IHV1
IHV3
ITCU
IHV2
40, 41
40, 41
40, 41
40, 41
40, 42
51
40, 41
40, 41
61
69
69
4
69
63
63
30
30
69
4
7
7
7
7
7
7
7
76
67
67
92
92
92
92
92
82
5
65
65
7
5
5
5
5
5
5
87
11, 74
87
65
91
7
7
6
6
6
6
6
6
6
Baur
Bender
Cannon
Cooper Power Systems
Crystal
Crystal
Crystal
Crystal
Crystal
Crystal
Crystal
Crystal
Crystal
Crystal
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
Cutler Hammer
DILO
DILO
DILO
Doble
Doble
Doble
Doble
Doble
Doble
Doble
Doble
Doble
Dranetz
Dranetz
Dranetz
Dranetz
Dranetz
Dranetz
Dranetz
Dranetz
Dranetz
Dranetz
Dranetz
EA Technologies
Electrical Test Instruments
Electrical Test Instruments
Electrical Test Instruments
Electrical Test Instruments
Electrical Test Instruments
Extech
Extech
Extech
Fluke
Frida
58
LT-3000
74, 86
L121-250
66
METK1
40, 44
XP2i-100
91
XP2i-10K
91
XP2i-15
91
XP2i-1K
91
XP2i-2K
91
XP2i-30
91
XP2i-300
91
XP2i-3K
91
XP2i-500
91
XP2i-5K
91
1232C50G05
40, 42
1232C50G10
40, 42
140D481G02
40, 43
140D481G03
40, 42
7801C56/MSTS120V
40, 43
7801C57
40, 43
8779C02G03
40, 42
8779C02G04
40, 42
MTK1000
40, 43
PRTAAPM
40, 43
PRTBAPMDV
40, 43
SPBPTK
40, 43
3-027-R002
49
3-033-R002
49
DN8/DN20
49
F2010
16
F2253
16
F2700
16
F6150
15
F6895
17
M4000
18, 51, 60, 84
M4110
18
M5400
19
Type C
60, 84
3000XL24
3
3000XL36
3
3000XL48
3
6000XL24
3
6000XL36
3
6000XL48
3
Dranview
3
Dranview Enterprise Edition
3
PX5
3
TR-2500
3
TR-2510
3
UltraTev +
21, 52, 80
PI-1600
37
PI-2500
37
PI-4000
37
PI-5000
37
PI-800
37
407736
81
480823
82
EA30
81
63
82
888.902.6111
■
www.intellirentco.com
Page
Manufacturer
Model
Page
Manufacturer
Model
Page
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
Fluke
GE
GE
124
125
196
434
435
725
744
771
789
810
1750
2686
3005
3014
3110
3210
3310
9141
43B
700P00
700P01
700P02
700P03
700P04
700P05
700P06
700P07
700P08
700P09
700P22
700P23
700P24
700P27
700P29
700P30
700P31
700PA3
700PA4
700PA5
700PA6
700PD2
700PD3
700PD4
700PD5
700PD6
700PD7
700PV3
700PV4
87 V
FAI
FOM
FOS
I-2000
PAI
Ti32
Ti45
Ti55
GTUTK20
PST1-1
9, 71
9, 71
11
9
9
88
88
90
76, 88
85
3
8, 67
3
3
3
3
3
28
9
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
89
76, 88
8, 67
61
61
7
8, 67
79
78
78
40, 44
40, 44
GE
GE
GE
GE Multilin
General
GW Instek
Hart
HD Electric
High Voltage
High Voltage
High Voltage
High Voltage
High Voltage
High Voltage
High Voltage
Hipotronics
HV Diagnostics
HV Diagnostics
HV Diagnostics
HV Diagnostics
Innovative Utility Products
Isotech
Isotech
Isotech
Magna IV
Manta
Manta
Martel
Martel
Martel
Martel
Martel
Martel
Martel
Martel
Martel
Martel
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Megger
Merlin Gerin
Metrel
Metrel
Metrel
Metrel
TAKTS1
TVRMS2
TVTS1
F485
DCS-1800
GFG-8255A
375
DVM-II
PFT-303CM
PFT-503CM
PTS-130
PTS-200
PTS-75
PTS-80
VLF-6022CM
OC60D
HVA30
HVA60
TD-30
TD-60
Fault Wizard
ISIS
Jupiter
Quick-Cal 550
PS12/480
MTS-1030
MTS-5000
MECP 100-V
MECP 10K
MECP 500
PI 100
PI 1000
PI 30
PI 300
PI 3000
PI 500
PI C-V
210415
246100B
BGFT
CB-100
CB-845
CFL535
DDA-3000
DDA-6000
DET20C
DET3TC
DLRO600
I Clamp
MS-2
PMM-1
S1-1052
S1-552
SMRT36
34547
2077
2088
3121
3123
40, 44
40, 44
40, 44
17
81
71
89
77, 87
53
53
54
55
54
54
55
27
56
57
56
57
64
93
93
93
50
10, 72
12
90
90
90
91
91
91
91
91
91
91
33, 63
66
66
19, 51
39
61
39
39
69
69
31
69
34
10, 72
33
33
14
40, 45
32, 62
68
32, 62
68
the test equipment answer
97
Index by Manufacturer
Index by Manufacturer
98
Manufacturer
Model
Metrel
Metrel
Monarch
Ohmic
Omicron
Omicron
Omicron
Omicron
Omicron
Omicron
Omicron
PDMA
Phenix
Phenix
Phenix
PIE
PIE
PIE
PIE
PIE
PIE
Proflex
Programma
Programma
Qualitrol
Radian
Radian
Radian
Radian
Radian
Radian
Radian
Radian
Radian
Radian
Radian
Ralston
Ralston
Raytech
Raytech
Raytech
Raytech
Raytech
Raytech
Raytech
Raytech
Rion
RKI
RKI
Satin American
Satin American
SBS
Sencore
Sensorlink
Sensorlink
Sensorlink
Siemens
Siemens
Siemens
3200
3201
Nova Strobe DB
BET300AD
CMC 356
CP CB2
CP TD1
CPC 100
CPOL
DIRANA
FRAnalyzer
MCEMax
6CP-100-7.5
HC-1
HC-2
211
322
334
525
532
541
ACP 3000 Tridra
Sverker 760
TM200
KIT-013-1
RD-21-112
RM-111
RM-1Hz
RM-1S
RM-KYZ
RR-1H
RR-1HV
RR-DS
RR-DS
RR-KYZ
RRKYZ-2
DP0V
HPGV
Micro Centurion II
Micro Junior II
TR-1
T-Rex
TR-SPY Mark II
TR-SPY Mark III
WR-14
WR-50-12
VM-82
GX-2003
GX-2009
ETC.12 Adaptor
ETC-PTS
2002
LC53
6-920
Amp LiteWire
Volt LiteWire
PTS-4
PTS-5
SBAPM
Page
33, 63, 85
32, 62
83
11, 74, 86
13
23, 38
23
22, 38
23
20
20
84
55
35
35
92
92
92
92
92
92
3
14
52
28
70
70
70
70
70
70
70
70
70
70
70
90
90
31
30
26
26
26
27
24
24, 85
83
86
86
40, 46
40, 46
66
76
10, 73
73
73
40, 46
40, 46
40, 47
888.902.6111
Manufacturer
Model
Page
Siemens
Siemens
Siemens
Siemes
SignalCrafters
SignalCrafters
SignalCrafters
SPM
SPM
Square D
Square D
Square D
Square D
Square D
Square D
Summit
SureTrip
Transcat
Transdata
Tristate
UE Systems
Utility Relay Co
Vaisala
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vanguard
Vitrek
Westinghouse
Westinghouse
TS-31
WL Full Function
WLTS
ELTPHB
60
90
110
VIB-10
VIB-11
CBTM3
CBTM4A
CBTMB
S33594
S33595
UTS-3
15kVP
CON1111
7010T
2130
TSW45
UltraProbe 100
1-AC-PRO-TS
DM70
ATRT-03 SII
Auto Ohm SII
CT-6500 SII
DIGITIMR
EZCT
EZCT-10
EZCT-2000A
EZCT-2000B
LT-10
LT-24
MCCB-250
PCI-600
RT-DT1
RT-HMA
RT-HMB
RT-Mag
RT-PM
Transducers
UPS S-2
VBT-60
VBT-80
WRM-10
WRM-10P
WRM-40
V61
PI-161
SCBII
40, 46
40, 47
40, 46
40, 47
75
75
75
83
83
40, 45
40, 45
40, 45
40, 45
40, 45
40, 45
77
40, 47
92
71
77
79
40, 47
28, 50
27
31
48
48
29
29
29
29
48
48
34
35
48
48
48
48
48
48
50
53
53
25
25
25
87
72
40, 47
■
www.intellirentco.com
the test equipment answer
Test
Equipment
Rental
T 972.317.0479
|
www.intellirentco.com
|
contact us at info@intellirentco.com
the test equipment answer
604 Henrietta Creek
Suite 400
Roanoke, TX 76262
T 888.902.6111
T 972.317.0479
F 817.491.0068
intellirentco.com
DPGHFS52DA
info@intellirentco.com