Ideas Supporting Ideas
the focus:
ACCESSORIES
Ceiling Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Suspended Ceiling Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Structural Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Angled Ceiling Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Extension Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Security Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Other Installation Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Control Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PRODUCT SPECIFIC ACCESSORIES
Projector Ceiling Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
SMART-LIFTS™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Large Flat Panel Display Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 31
Small Flat Panel Display Mounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Equipment Lifts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
USA/INTERNATIONAL P 800.582.6480 F 877.894.6918 / P 952.894.6280 F 952.894.6918
EUROPE P 49 7031/76 91 41 F 49 7031/76 91 42
ACCESSORIES
ACCESSORIES
CEILING PLATES
23.25" / 590.6mm
1.90" / 48.3mm
DIA
CMA-100
.75"
19.1mm
CMA-100 8" CEILING PLATE
WITH ATTACHED ADJUSTABLE
1 1⁄2" NPT COLUMN
ACCESSORIES
CMA-100 attaches to all 1 1⁄2" NPT
openings. It is height adjustable from
24 1⁄4" to 46" in 3⁄4" increments.
Combines with other Chief Ceiling
Plates for other installation options.
Four set screws included.
Weight Capacity: 500 lbs.
2.25" / 57.2mm REF
1.25” / 31.8mm
.281" / 7.13mm DIA
5⁄16" / 8.0mm-18
@45°
1.88" / 47.8mm
13.88" / 352.6mm
1 1⁄2"NPT
THREADED COLUMN SECTION OF CMA-100
.75" / 19.1mm TYP
4.00"
101.6mm
8.00"
203.2mm
SQ.
CMA-110 combines with any CMA Fixed Extension Column, CMA
Adjustable Extension Column, or other 1 1⁄2" NPT extension columns
threaded on both ends. Can also combine with CMA-120 for angled
ceiling installations. Includes set screw. Weight Capacity: 500 lbs.
6.5" / 165.1mm
3.25"
82.55mm
.43"
10.92mm
3.25"
82.55mm
8.0"
203.2mm
6.19"
157.2mm
.25"
6.35mm
8.0" / 203.2mm
ø.10
TAPPED HOLE FOR 10-24 UNC
25.94" / 658.9mm
.281" / 7.1mm DIA
.438" / 11.12mm DIA (4)
6.50"
165.1mm
SQ.
CMA-110 8" CEILING PLATE WITH 1 1⁄2" NPT OPENING
CMA-110
12.75" / 323.9mm
3 EQ. SP. @ .75=2.25
TYP (2)
1.5" / 38.1mm - 11.5 NPS
STRAIGHT TAP
CMA-110 PLATE
CMA-115 6" CEILING PLATE WITH
1 1⁄2" NPT OPENING
CMA-115 combines with any CMA Fixed Extension Column, CMA
Adjustable Extension Column, or other 1 1⁄2" NPT extension columns
threaded on both ends. Includes set screw. Weight Capacity: 500 lbs.
.50"
12.7mm
8 EQ. SP.
@ 1.50=12.00
1.56"
39.6mm
DIA
CMA-260 8" CEILING PLATE
AND ADJUSTABLE 2" NPT
COLUMN
CMA-260 attaches to all 2" NPT threaded
couplers. It is height adjustable from
24 3⁄4" to 46" in 3⁄4" increments.
Combines with the CMA-120 for angled
ceiling applications. Not generally used
for projector mounting.
Weight Capacity: 500 lbs.
CMA-210 8" CEILING PLATE
WITH 2" NPT COUPLER
CMA-210 combines with any 2" NPT
3.43
extension
column threaded on both ends.
Can also combine with CMA-120 for angled
ceiling installations. Not generally used for
projector mounting. Weight Capacity:
500 lbs.
CMA-260
CMA-210
CMA-330 AND 332 OFFSET
FIXED CEILING PLATES
4.5" / 114.3mm
2.25"
57.15mm
.75" / 19.05mm
2.25"
57.15mm
4.5"
114.3mm
6.0"
152.4mm
CMA-115
.44
11.8mm
6.0" / 152.4mm
8" square ceiling plates. CMA-330 attaches
to 1 1⁄2" NPT threaded extension column.
CMA-332 attaches to 2" threaded extension
column.The offset is 1 3⁄4" high for cable
access. 4 1⁄2" overall height.
Weight Capacity: 500 lbs.
CMA-330
ø.10
TAPPED HOLE FOR 10 - 24 UN
1.5" / 38.1mm - 11.5 NPS
STRAIGHT TAP
CMA-115 PLATE
CMA-105 4" CEILING PLATE WITH
1 1⁄2" NPT OPENING
CMA-105 combines with any CMA Fixed Extension
Column, CMA Adjustable Extension Column, or
other 1 1⁄2" NPT extension columns threaded
on both ends. Good for installations using short
extension columns. Weight Capacity: 500 lbs.
24
CMA-105
CMA-345 STRUCTURAL CEILING
PLATE WITH FLEX JOINTS
CMA-345 ceiling plate with flexible neoprene
rubber joint minimizes the transfer of shock
and extreme vibration from the plate to the
equipment. Attaches to ceiling structural
member. Unit has 1 1⁄2" NPT fitting for
attachment to threaded extension column.
Includes set screw. Weight Capacity: 500 lbs.
C H I E F M A N U FA C T U R I N G I N C . – P R E S E N TAT I O N S U P P O R T S O L U T I O N S
WWW.CHIEFMFG.COM
CMA-345
SUSPENDED CEILING KITS
CMA-440 LIGHT WEIGHT SUSPENDED CEILING KIT
The easiest to install, most economically priced and smallest mounting kit available for suspended ceilings. Perfect for
mounting most LCD/DLP projectors under 50 lbs. due to minimal assembly and easy clamping to ceiling tracks. Infinite
adjustment allows positioning of 1 1/2" NPT opening at nearly any location within a 2' x 2' or 2' x 4' ceiling tile. Comes
with 10 ft. safety cable, 20 ft. strand wire, two outlet knockouts, four turnbuckles, wood eye bolts, concrete anchors and
chrome ring. Color: White. Weight Capacity: 50 lbs.
CMA-440
CMA-450 SUSPENDED CEILING KIT
CMA-450
ACCESSORIES
CMA-450 is a 2' x 2' plate designed to sit above the suspended ceiling secured by safety wire. Nine mounting hole
positions with threaded ends for accepting 1 1/2" NPT extension column. Comes with 10 ft. safety cable, 20 ft. strand
wire, two outlet knockouts, four turnbuckles, wood eye bolts, concrete anchors and chrome ring. Color: White.
Weight Capacity: 250 lbs. (center hole), 125 lbs. (side and corner holes).
CMA-455 SUSPENDED REPLACEMENT KIT
CMA-455 is designed to replace one 2' x 2' ceiling tile or sit above the suspended ceiling and is secured to the structure
above with four tie wires. Threaded hole accepts 1 1/2" NPT extension column. Comes with 10 ft. safety cable, 20 ft.
strand wire, two outlet knockouts, four turnbuckles, wood eye bolts, concrete anchors and chrome ring. Color: White.
Weight Capacity: 250 lbs.
CMA-455
STRUCTURAL ADAPTERS
CMA-300 PIPE CLAMP
CMA-300 clamps onto horizontal pipe from 1 9/10" to 3 1/2".
Allows cable access. Attaches to 1 1⁄2" NPT threaded extension column.
Weight Capacity: 300 lbs.
CMA-365 TRUSS CEILING ADAPTER
CMA-300
CMA-365
CMA-365 adapts 1 1/2" threaded extension column to square, round,
rectangular, or I-beam trusses up to 3" in diameter. Can be used with
or without extension columns. Weight Capacity: 250 lbs.
CMA-360 I-BEAM CLAMP
CMA-360 adapts 1 1⁄2" NPT pipe to I-beam truss from 2 5⁄6"–12" width. Weight Capacity: 250 lbs.
CMA-385 INTERNAL JOIST MOUNT
CMA-385 expands to bridge ceiling joists on 16" or 20" centers. Adjustable clamping bracket has threaded
fitting to accept 1 1⁄2" NPT threaded extension column. Weight Capacity: 300 lbs.
CMA-360
CMA-390 16" ON CENTER CEILING PLATE
CMA-390 can be attached to finished ceilings (wood joist on 16" centers) using the four included washer head
wood screws, or structural ceilings using concrete anchors (CMA-380). Unit has threaded fitting to accept
1 1⁄2" NPT threaded extension column. Weight Capacity: 300 lbs.
CMA-370 UNISTRUT® ADAPTER KIT
CMA-385
CMA-370 adapts Chief’s CMA Ceiling Plates to 1 5/8" wide Unistrut.® Kit includes four 3/8" diameter channel
nuts with springs and attachment bolts.
CMA-375 UNISTRUT® PLUS ADAPTER KIT
CMA-375 includes two 36" long Unistrut® channels plus four 3/8" diameter channel nuts with springs and
attachment bolts.
CMA-380 CONCRETE FASTENER KIT
CMA-390
CMA-380 includes four concrete fasteners to be used with concrete or brick installations.
USA / INTERNATIONAL P 800.582.6480 F 877.894.6918 / P 952.894.6280 F 952.894.6918 EUROPE P 49 7031/76 91 41 F 49 7031/76 91 42
25
ANGLED CEILING PLATES
CMA-120 45° ANGLED CEILING ADAPTER PLATE
CMA-120 adjusts from 0 degrees to 45 degrees to level an angled ceiling.
Must be used with another 8" Chief Ceiling Plate that has a threaded
fitting such as CMA-100, CMA-110, CMA-210, CMA-260, CMA-330 or
CMA-332. Weight Capacity: 250 lbs.
CMA-120
CMA-395 100° ANGLED CEILING PLATE
WITH THREADED COUPLER
ACCESSORIES
CMA-395 adjusts from -5 degrees to +95 degrees to level an angled
ceiling. Accepts 1 1/2" NPT threaded extension column. Three slotted
mounting holes. Dimensions: 4 1/4" H / 107.9mm x 3" W / 76.2mm x
7 1/2" L / 190.5mm. Weight Capacity: 500 lbs.
CMA-395
EXTENSION COLUMNS
CMA ADJUSTABLE COLUMNS
CMA Adjustable Columns can be used with any 1 1⁄2" NPT accessory to
lower projector to desired height. Provides 2' range of height adjustment
in 1" increments depending on model (6" to 12' lengths). Includes set screw
for added rigidity. Weight Capacity: 500 lbs.
Model
Length
Model
Length
CMA006009
6"–9" (15–23cm)
CMA0507
5'–7' (1.5–2.1m)
CMA012018
12"–18" (31–46cm)
CMA0608
6'–8' (1.8–2.4m)
CMA018024
18"–24" (46–61cm)
CMA0709
7'–9' (2.1–2.7m)
CMA0203
2'–3' (.6–.9m)
CMA0810
8'–10' (2.4–3.1m)
CMA0305
3'–5' (.9–1.5m)
CMA0911
9'–11' (2.7–3.4m)
CMA0406
4'–6' (1.2–1.8m)
CMA1012*
10'–12' (3.1–3.7m)
*NOTE: CMA1012 Extension Column cannot ship by UPS due to length.
CMA FIXED EXTENSION COLUMNS
CMA Fixed Extension Columns can be used with any 1 1⁄2" NPT accessory to
lower projector to desired height. Consists of 1 1⁄2" NPT pipe threaded on
both ends (3" to 6' lengths). Weight Capacity: 500 lbs.
26
Model
Length
Model
Length
CMA003
3" (8cm)
CMA024
2' (.6m)
CMA006
6" (15cm)
CMA036
3' (.9m)
CMA008
8" (20cm)
CMA048
4' (1.2m)
CMA012
12" (31cm)
CMA060
5' (1.5m)
CMA018
18" (46cm)
CMA072
6' (1.8m)
C H I E F M A N U FA C T U R I N G I N C . – P R E S E N TAT I O N S U P P O R T S O L U T I O N S
WWW.CHIEFMFG.COM
PROJECTOR SECURITY ACCESSORIES
ALL-POINTS™ SECURITY SYSTEM
SA-1 SECURITY ANCHOR
Chief’s exclusive All-Points™ is an integrated
security system that is included in the RPA
Series projector mount. Uses tamperproof
parts and a steel-into-steel design to lock
the mount at all key connection points:
bracket-to-projector; mount-to-bracket; and
Roll, Pitch and Yaw adjustments. See RPA
ALL-POINTS™
Series mount, pages 4–5.
SA-1 secures connections to NPT pipe,
truss work and other components.
Security shroud is held in position by a
security cable (not included) blocking
access to the hardware.
SA-1
HC-1 HEAVY-DUTY CABLE SYSTEM
PG-1 PROJECTOR GUARD™
SECURITY CAGE
The PG-1 Projector Guard™ fully encloses
LCD/DLP projectors in a locked steel cage to
protect projectors from theft or guard
against recreational damage in gymnasium
environments. See full specifications,
page 9.
ACCESSORIES
Kit includes Chief’s exclusive security anchor, 1⁄4" x 5' vinyl-coated
cable, 40mm padlock, two steel security pads with patented rotating
cable fasteners and a 3 gram tube of instant adhesive. SA-1 included in
the system.
SECURITY SYSTEM
PG-1
PL-4 PROJECTOR LOCK
PL-4 Projector Lock discourages unauthorized removal of projectors. Lock
body is 1" diameter x 1 1⁄4" long. Made from aircraft aluminum, the PL-4
has a seamless housing and a seven-pin tumbler locking mechanism
(two keys provided). Cable is nylon coated. 3M™ adhesive secures lock
to projector.
HC-1
LC-1 CABLE LOCK
LC-1 kit includes coiled cable that extends 6', two steel security pads,
a 2 gram tube of super glue gel and 30mm padlock.
PL-4
LC-1
LARGE FLAT PANEL DISPLAY SECURITY ACCESSORIES
PAC-130 Q-LATCH™ MOUNTING SYSTEM LOCKABLE LATCH
Lockable latch for PRO, PST and PSM Large Flat Panel Display mounts.
Includes adaptable accessory flag and hardware. Compatible with padlocks.
PAC-135 Q-LATCH™ MOUNTING SYSTEM LOCKABLE LATCH
WITH PADLOCK
PAC-130
PAC-135
Lockable latch with padlock/keys for PRO, PST and PSM Large Flat
Panel Display mounts. Includes adaptable accessory flag, padlock/keys
and hardware.
SMALL FLAT PANEL DISPLAY SECURITY ACCESSORY
FSA-1000 Q2™ MOUNTING SYSTEM LOCKABLE LATCH
Lockable latch for FSM, FPM, FSP and FDP Small Flat Panel Display mounts.
Includes adaptable accessory flag and set screw. Compatible with padlocks.
FSA-1000
USA / INTERNATIONAL P 800.582.6480 F 877.894.6918 / P 952.894.6280 F 952.894.6918 EUROPE P 49 7031/76 91 41 F 49 7031/76 91 42
27
OTHER INSTALLATION ADAPTERS
CMA-151 1 1⁄2" TO 1"
ADAPTER/REDUCER
CMA-640 ESCUTCHEON
FINISHING RING
Converts Chief’s RPA top or any 1 1⁄2" NPT
accessory for use with 1" NPT pipe.
Chrome ring visually enhances
suspended ceiling installations by
covering the hole where extension
column passes through the ceiling
tile. Ring is hinged to open.
CMA-340 SUPPORT BRACKET
AND CABLE ASSEMBLY
CMA-151
ACCESSORIES
CMA-340 is used with long extension
installations. Attaches to 1 1⁄2" NPT or 2"
threaded extension column for added
support where rigidity or sway dampening
is needed. Includes bracket, four cables
approximately 10 ft. each and four
turnbuckles.
CMA-640
WMA-300 WALL MOUNT ARM
CMA-340
CMA-270 THREADED
PIPE COUPLER
WMA-300 can be used to wall mount RPA, UPC or LCDA Series
ceiling mounts. Comes with 4" extension column. Order longer
1 1⁄2" NPT extension column separately. Weight Capacity: 150 lbs.
(concrete installation), 125 lbs. (wood stud installation).
Not recommended for metal stud mounting.
18 1/4"
CMA-270 threaded pipe coupler attaches
1 1⁄2" NPT threaded extension column to
1 1⁄2" NPT threaded pipe. 2 1/16" height
added to installation. Two set screws
included for security and stability.
Weight Capacity: 500 lbs.
CMA-270
WMA-300
CMA-350 HEAVY-DUTY SWIVEL
ADAPTER
Allows smooth and safe axis turning at
the coupler point. Provides 330 degrees of
rotation and allows cable access. CMA-350
attaches to 1 1⁄2" NPT threaded extension
column. 330 degree stop keeps cables
from twisting.
XY-1 X-Y AXIS ADJUSTMENT BRACKET
XY-1 adjustment bracket allows for 2" adjustments in any
direction. Can be positioned on 1 1/2" NPT extension column
for either right/left or fore/aft adjustment. Order extension
columns separately.
CMA-350
QD-1 QUICK DISCONNECT
QD-1 provides quick release by
loosening flange nuts and removing
safety pin. Helpful with mounting heavy
equipment such as Chief’s VCM projector
mounts, MAGNA-LIFT™ Electric Service Lift
and TV mounts. Slight Roll adjustment is
possible using shims. Use with any 1 1⁄2"
NPT threaded extension column.
Weight Capacity: 500 lbs.
STRUCTURAL
CEILING
XY ADJUSTMENT
BRACKET
2"
2"EA. WAY
TOP VIEW
SUSPENDED
CEILING
1.5"
QD-1
5.5"
139.7mm 11.0"
279.4mm
SAFETY PIN
1.75"
44.45mm
2.5"
63.5mm
XY-1
NPT 1.5" pipe
PROJECTOR
BRACKET
QD-1
COUPLER
4.375"
.31"-18 STUDS
W/NUTS (4)
QD-1
28
C H I E F M A N U FA C T U R I N G I N C . – P R E S E N TAT I O N S U P P O R T S O L U T I O N S
WWW.CHIEFMFG.COM
4.0"
2.5"
63.5mm SLOT (2)
101.6mm
2.75"
69.85mm
CONTROL ACCESSORIES
IR-10 INFRARED SENSOR CONTROL
ASP-401 INDIVIDUAL CONTROL SYSTEM
Infrared sensor control can be used to control any of Chief’s lifts.
Must be used in conjunction with a low-voltage control.
Allows up/down intermediate break by toggle switch. Must be used in
conjunction with a low-voltage control.
RC-10 RADIO FREQUENCY REMOTE CONTROL
PRODUCT SPECIFIC ACCESSORIES
PROJECTOR CEILING MOUNTS
RPA UNIVERSAL TOP
LSB-100
LSB-100 LATERAL SHIFT ACCESSORY FOR
RPA SERIES MOUNT – PAGES 4–5
In an RPA installation, the LSB-100 allows 3" right/left lateral adjustments
to center the lens. This accessory keeps the quick disconnect feature of the
RPA for easy projector reconnection. An additional 2 1⁄4" right/left lateral
adjustment is possible for projectors under 15 lbs.
Weight Capacity: 200 lbs.
SLB BRACKET
3.50"
CMA-250 FLUSH MOUNT ADAPTER FOR LCDA SERIES
MOUNT – PAGE 7
5.25"
CMA-250 can be used to flush mount the LCDA ceiling mount.
CMA-250
15.50" / 393.7mm
.50"
12.7mm
13.50"
342.9mm
LPK-1 LOW-PROFILE MOUNTING KIT FOR VCM
SERIES MOUNT – PAGE 8 OR MAGNA-LIFT™ –
PAGES 14–15
6.750" / 171.5mm TYP
3.75"
95.3mm
TYP
2.50"
63.5mm
TYP
9.375"
238.1mm
5.00"
127mm
LPK-1 attaches to the top of the VCM or MAGNA-LIFT™ Electric
Service Lift to permit flush mounting to the ceiling, without loss of
the X-Y movement.
7.50"
190.5mm
.50" / 12.7mm x .750" / 19.1mm (4)
4.00"
101.6mm
TYP
.344” / 8.7mm x 3.38" / 85.9mm (4)
LPK-1 LOW-PROFILE MOUNTING KIT
USA / INTERNATIONAL P 800.582.6480 F 877.894.6918 / P 952.894.6280 F 952.894.6918 EUROPE P 49 7031/76 91 41 F 49 7031/76 91 42
29
ACCESSORIES
Remote control can be used to control any of Chief’s lifts. Must be used
in conjunction with a low-voltage control.
PRODUCT SPECIFIC ACCESSORIES (CONTINUED)
SMART-LIFTS™
CMA-240 CEILING FINISHING
KIT FOR SL-150 – PAGES 10–11
SMA-600 SINGLE COLUMN
MOUNTING PLATE FOR SL-236 – PAGES 12–13
CMA-240 provides a finished look to the T-Channels in a 2' x 2'
suspended ceiling installation for the SL-150.
SMA-600 is used for the SL-236 installation and attaches to any 1 1⁄2" NPT
extension column. The mounting plate allows 3" fore/aft and 3" left/right
adjustments, as well as slight Roll, Pitch and Yaw adjustments.
ACCESSORIES
UPB-1 UPRIGHT PROJECTOR
BRACKET FOR SL-150 AND SL-236 – PAGES 10–13
UPB-1 allows projectors to hang in an upright position and retain
the Pitch and Roll adjustments of the SL-150 and SL-236. The UPB-1
will accommodate projectors up to 9 1⁄8" H / 231.8mm x 17 1⁄4" W /
438.1mm x 20" D / 508mm.
SMA-620 SUSPENDED CEILING
TRACK CLIP FOR SL-236 – PAGES 12–13
SMA-620 provides a secure means of attaching the suspended ceiling
T-channel in place and allowing the suspended ceiling track to be
attached to the sides of the lift. Kit includes eight clips.
SMA-650 THREADED ROD
ADAPTER FOR SL-236 – PAGES 12–13
Designed for ease of use when installing threaded rod or cabling.
Attach the U-channel adapters to the lift and attach outside holes to
threaded rod. Allows easy access for bolting lift to rod. Kit includes two
U-channel adapters.
SMART-LIFT™ SL-150
SMART-LIFT™ SL-236
30
C H I E F M A N U FA C T U R I N G I N C . – P R E S E N TAT I O N S U P P O R T S O L U T I O N S
WWW.CHIEFMFG.COM
PRODUCT SPECIFIC ACCESSORIES (CONTINUED)
LARGE FLAT PANEL DISPLAY MOUNTS
PAC-140
Lateral Shift Accessory for PSM, PST,
PRO and PLP Large Flat Panel Display
wall mounts. Allows easy spanning of
a 24" on-center stud system or 4" of
lateral shift on either side of a 16"
on-center stud system. Includes two
28" length T-slotted aluminum
extrusions and safety-catch screws.
Seven mounting holes at 4" intervals.
Grooved for drilling at other intervals.
Weight Capacity: 600 lbs.
Q-Clamps for added stability for PWP, PWL, PWS, PDS, PFS, PTS. Comes
as standard on all other 2000 Series Q-Latch™ products for Large Flat
Panel Displays. Kit includes two clamps.
Lateral Shift Accessory for PSM Large Flat Panel Display wall mount
designed to fit 32" on-center stud system or 2" lateral shift on either side
of 32" on-center stud system. Includes two 36" length T-slotted aluminum
extrusions and safety-catch screws. Nine mounting holes at 4" intervals.
Grooved for drilling at other intervals. Weight Capacity: 600 lbs.
ENS
Lateral Shift Extrusion. Aluminum extrusion available in custom lengths
for forming video walls with multiple Large Flat Panel Displays.
Compatible with PSM, PST, PRO and PLP wall mounts. Order per inch, up
to 108". For additional length, order multiple extrusions.
Weight Capacity: 600 lbs.
Smoked Acrylic Accessory Shelf for
Large Flat Panel Display PPC
Presenters Cart.
Weight Capacity: 35 lbs. – Page 47
Accessory Shelf for Large Flat Panel
Display PTC Mobile Cart – Page 46
USA-1
Swivel Accessory Shelf for Large Flat
Panel Display PTC Mobile Cart – Page 46
PAC-100
Lockable latch for PRO, PST and PSM
Large Flat Panel Display mounts.
Includes adaptable accessory flag and
hardware. Compatible with padlocks.
See pages 37–39.
PAC-160
Lockable latch with padlock/keys for
PRO, PST and PSM Large Flat Panel
Display mounts. Includes adaptable
accessory flag, padlock/keys and
hardware. See pages 37–39.
PPC SHOWN WITH PAC-150 VIDEO
CONFERENCING SHELF AND
PAS-100 ACCESSORY SHELVES
PAS-1
PAC-130
PAC-135
PAC-135
Q-LATCH™ MOUNTING SYSTEM WITH
LOCKING FLAG AND PADLOCK
Video Conferencing Shelf for PPC, PFS,
PWS, PDS, PWP and PWL. Shelf
dimensions: 14" W x 10" D. Height
adjustable 3 1/2". Attaches to
mounting plate.
PAS-100
PAC-126
PAC-130
Q-LATCH™ MOUNTING SYSTEM WITH
LOCKING FLAG ACCESSORY
PAC-150
ACCESSORIES
PRO SHOWN WITH PAC-125
LATERAL SHIFT ACCESSORY
PAC-125
Accessory Shelf for Large Flat Panel
Display PFS Flat Base
Floor Stand – Page 48
PTC SHOWN WITH PAS-1
ACCESSORY SHELF
Small Flat Display Accessory Bracket.
Attaches Small Flat Panel Display to the
PFS Floor Stand. Adapts to 75mm x
75mm and 100mm x 100mm VESA®
compliant displays. Infinitely adjustable
along length of pole.
PAC-165
Small Flat Display Accessory Bracket.
Affixes Small Flat Panel Display to the
PTC Mobile Cart. Adapts to 75mm x
75mm and 100mm x 100mm VESA®
compliant displays. Infinitely adjustable
along length of poles.
PFS SHOWN WITH PAC-160
SMALL FLAT PANEL DISPLAY
ACCESSORY BRACKET
USA / INTERNATIONAL P 800.582.6480 F 877.894.6918 / P 952.894.6280 F 952.894.6918 EUROPE P 49 7031/76 91 41 F 49 7031/76 91 42
31
PRODUCT SPECIFIC ACCESSORIES (CONTINUED)
SMALL FLAT PANEL DISPLAY MOUNTS
FSA-035 HORIZONTAL BRACKET
FSA-015 VERTICAL BRACKET
Can be combined with a multiple vertical table stand to attach
up to four displays.
Can be used to quickly change a desk mount into
a wall mount.
ACCESSORIES
FSA-015
FSA-035
FSA-030 POLE PIVOT CLAMP
Can be used with a 28" extension to
attach up to two stacking displays
to the horizontal table stand.
FSA-020 DESK CLAMP
Can be used to quickly change a wall mount
into a desk mount.
FOR CEILING PLATES AND MORE
ACCESSORIES, SEE PAGES 24–31.
FSA-030
FSA-020
FSA-028 28" EXTENSION
Can be used with a pole pivot clamp or horizontal bracket to attach
up to four displays to a table stand.
FSA-028
EQUIPMENT LIFTS
PB-10, PB-10I (230V) LOW-VOLTAGE CIRCUIT
BOARD CONTROL FOR MAGNA-SHELF™ –
PAGES 70–71
HA-21 HEIGHT ADJUSTER FOR LM SERIES – PAGE 72
Positive stop, ratchet mechanism has 10 different height stops. 2 1⁄2"
increments on LM21/LM21DC, 4 1⁄4" increments on LM42/LM42DC.
Used for many wiring options including momentary push button, latching
switches, wall plates, RC-10, IR-10, safety pinch strips and powering
external devices. Ordered separately with MAGNA-SHELF.™ Comes
standard on PCL and PUL electric lifts.
32
C H I E F M A N U FA C T U R I N G I N C . – P R E S E N TAT I O N S U P P O R T S O L U T I O N S
WWW.CHIEFMFG.COM