Lighting Symbols

advertisement
SEC_EC2024PA_CAD
Job 9
Title: Standard Electrical Symbols
There are a few codes of practices and Singapore Standards that standardize the use of
electrical symbols for computer-aided design. There are as listed below:
a. SS 202 : Part 7 and 8 : 1999, and
b. CP 83 : Part 2 : 2000.
The code and standards recommends a common set of symbols to be used by all parties in the
building industry in the preparation of drawings. This will eventually:
 provide a standard set of 2D graphical symbols to represent entities of building components
for the building industry,
 facilitate common understanding and interpretation of information in drawings by different
users of building industry, and
 facilitate easy and efficient exchange of information.
Extract of the codes stated above is listed below for use in the module.
Lighting Symbols
Description of
Symbol
Graphic Image
Description of
Symbol
Fluorescent fitting
(18 W – Batten)
Fluorescent fitting
(2 x 18 W – Batten)
Fluorescent fitting
(36 W – Wall
Mounted Batten)
Fluorescent fitting
(2 x 36 W – Wall
Mounted Batten)
Fluorescent fitting
(300 X 1200 –
Recessed)
Fluorescent fitting
(600 X 1200 –
Recessed)
Graphic Image
Circular light fitting
Ceiling lighting point
Wall mounted light
fitting
Wall lighting point
Ceiling Spot light
Flood Light
Job 9
Page 1
SEC_EC2024PA_CAD
Wall mounted spot
light
Wall mounted flood
light
Lighting Switches Symbols
Description of
Symbol
Graphic Image
Description of
Symbol
Single-pole lighting
switch, 1-way (one
gang)
Single-pole lighting
switch, 1-way (one
gang, metalclad)
Double-pole lighting
switch, 1-way (one
gang)
Double-pole lighting
switch, 1-way (one
gang, metalclad)
Lighting switch,
2 -way (one gang)
Lighting switch,
2 -way (one gang,
metalclad)
Intermediate lighting
switch (one gang)
Dimmer c/w switch
Graphic Image
20 A double pole
switch c/w neon
indication lamp and
marked ‘Water
heater’
Waterproof lighting
switch
Flameproof lighting
switch
Splashproof lighting
switch
Electrical Switches Symbols
Description of
Symbol
Graphic Image
Description of
Symbol
Fireman’s switch
Key card switch
Isolator (rating as
shown)
Bell switch marked
with “Bell’ symbol
Job 9
Graphic Image
Page 2
SEC_EC2024PA_CAD
Power Symbols
Description of
Symbol
Graphic Image
Description of
Symbol
Shaver unit
13 A fuse connection
unit
Distribution board
Main switchboard
13 A switch socket
outlet (one gang)
13 A switch socket
outlet (one gang,
metalclad)
13 A switch socket
outlet (two gang)
13 A weatherproof
switch socket outlet
13 A switch socket
outlet (floor mounted)
13 A switch socket
outlet (mounted on
floor pedestal)
15 A switch socket
outlet
13 A switch socket
outlet (one gang
mounted at high
level)
Graphic Image
Lightning Protection
Description of
Symbol
Graphic Image
Air terminal
Description of
Symbol
Graphic Image
Lightning stub
Earth pit inspection
chamber c/w earth
electrode
Single Line Diagram Symbols
Description of
Symbol
Air/Oil circuit
breaker.
Rating as shown
Job 9
Graphic Image
Description of
Symbol
Graphic Image
Earth leakage relay
c/w time lag
Page 3
SEC_EC2024PA_CAD
Description of
Symbol
Graphic Image
Description of
Symbol
Moulded case circuit
breaker (MCCB) /
Miniature circuit
breaker (MCB)
Residual currentoperated circuit
breaker (RCCB).
Rating and
sensitivity as shown
Kilowatt-hour meter
Ammeter
HRC fuse (rating as
shown)
Voltmeter
Direct on-line starter
Star-delta starter
Auto-transformer
starter
Motor
Bell
Clock
Graphic Image
Battery
Telecommunication Symbols
Description of
Symbol
Graphic Image
Telephone outlet
Description of
Symbol
Graphic Image
Computer outlet
TV Antenna/Cable Symbols
Description of
Symbol
TV/FM co-axial
outlet
Graphic Image
Description of
Symbol
Graphic Image
Tele-conferencing
cable outlet
Singapore Cable
Vision
Job 9
Page 4
Download