DNIT FOR PROVIDING EXTERNAL ELECTRIFICATION WORKS INCLUDING
CAMPUS LIGHTING AND D.G. SET IN ADMINISTRATIVE CUM OFFICE
BUILDING AT SARSWATI VIHAR, HBC CHAKKARPUR, GURGAON.
TENDER AMOUNT = Rs. 78.25 LACS
EARNEST MONEY = Rs. 1.57 LACS
TIME LIMIT
S.
Nos.
Description
Qty.
TWO POLE STRUCTURE , metering cubical
and 11 KV load braek switch
1
Supply, erection,testing and commissioning of 2 pole
structure for terminating 11 KV O.H supply from
electricity supply authority as per specifications and
drawing and direction of Engineer-in-charge. The two
pole structure shall comprise of :- .
b
PCC pole 11 mtrs high (410 SP 56 as per latest
IS:2713), in cement concrete foundation 1:3:6 (1
cement : 3 coarse sand : 6 graded stone aggregate
40 mm nominal size) as per drawing including
excavation and refilling, 300 mm high, 450 mm dia
coping finished with neat cement etc. as required.
The rate shall be inclusive of painting with 2 coats of
red
d oxide
id primer
i
and
d 2 coats
t off aluminium
l i i
paint.
i t Th
The
portion of pole under the ground shall be provided
with 2 coats of bituminous paint, inside and outside Nos. 2
c
Steel sections, channels angles, flats, clamps, GI
nuts, bolts and required G.I. hardware etc of different
sizes for cross arms, bracings, supports etc for two
pole mounting arrangement, insulation, LA,
trifurcating cable box, GOD etc including anticlimbing
barbed wires (conforming to IS:278) having 4 points
barbs spaced 75 ± 12 mm apart. All steel structure
shall be given 2 coats of red oxide primer and 2
finishing coats of Aluminium paint as required as per
drgs and direction of Engineer- in-Charge. - Lot
d
Supply, installation, testing and commissioning of 11
KV class disc/ pin/ support insulators complete with
clamps and fixing hard wares and busbar & jumpers
made from weasel ACSR conductor etc complete as
required as per drgs and direction of Engineer- inCharge – Lot
Supply, installation, testing and commissioning of 11
KV station class thyrite type lightning arrestors
complete with mounting arrangement (on all phases)
-Lot.
e
f
= 4 MONTHS
Supply, installation, testing and commissioning of
drop out – lock out (DOLO) fuse, Gang operating
device (Air Break Switch) (operating rod to be
supported properly), complete with operating handle,
pad locking arrangement and brass pad lock with
three keys - Set 1
Unit
Rate
HSR/ NS
S.
Nos.
Description
g
Supply, installation, testing and commissioning of GI
stay set complete with 20 mm dia 1.8 M long stay rod
with 450 x 450 x 7.5 mm anchor plate with thimbles,
stay clamps, 7/4.00 mm dia GI stay wire, turn buckle
(20 mm x 600 mm) strain insulator, bow tightner in
cement concrete 1:3:6 foundation including
excavation and refilling etc. – Set 1
h
Earthing of poles with 2 Nos. 20mm dia M.S. rod
earthing and connecting the poles with 25 x 6mm GI
earth strip. - Lot
Earthing of lightning arrestors with 2 Nos. 32 x 6mm
GI strip directly connected with GI pipe Earth station
as per IS-3043 - Lot.
Two pole structure as described above.
i
j
2
Supply, laying , testing and commissioning of
Cubical type floor mounting outdoor type
operating at 12 KV Metering cum isolation
panel for essential services . The panel
fabricated with 2.00 mm. thick CRCA sheet
duly powder coated with channel base frame
including double door interlock with earthing
switch for safety, water and vermin proof and
air insulated feature complete with necessary
PVC insulated copper bus bar heat shrinkable,
small wiring, inter connection, label, cable
eyes, cable termination to receive XLPE cable
with following specification :
Rated voltage : 12 KV
Rated Current : 630 Amp.
Frequency :
50 Hz.
Rated Sort time current : 18.96 KA
Rated Making Current :
31.5 KA
Operating Mechanism with mannual operation
trip quickly and break automatically at blowing
of any of the fuses.
Door interlock with earthing switch for safety.
Quick make and break with ON, OFF position.
PVC insulated copper bus bar of required size.
Indicating lamp 1- set.
HRC fuses upto 100 Amp. 1-set with metering
cubical (CT, PT and TVM)
Concord make CT Ratio
/ 5 Amp.
Accuracy class
as per DHBVN Ltd.
Specifications.
Concord make PT Ratio 11 KV/110 Volt
Accuracy class 0.5 as per DHBVN Ltd.
Specifications.
Qty.
Unit
Rate
1
Set
59740.00
HSR/ NS
N.S.
S.
Nos.
Description
Qty.
Unit
Rate
HSR/ NS
Secure make trivector meter 11 KV/ 110 Volt,
/ 5 Amp. As per DHBVN Ltd. Specifications.
And other petty material required to complete
the job up to the entire satisfaction of the
Engineer-In-Charge.
HT PANEL ,CABLES AND TRANSFORMER
HT PANEL
3
Supplying,
installation,
testing
&
commissioning of H.V. air insulated distribution
switchgear consisting of one panel H.T. Board
suitable for Indoor installation for use on 11
KV 50 Hz earthed system having a
symmetrical breaking capacity of 350 MVA at
11 KV The panel shall be equipped with
following accessories as per specification
compete as required.
INCOMING/ Outgoing
One No. 400 A Air insulated Metal clad
housing
g
A set of three 3 phase, 400A PVC insulated
copper busbars.
One Tripple pole draw out truck mounted 400
A 350 MVA, VCB fitted with all necessary
control devices.
One Trip free, motor charged, spring released
closing mechanism fitted with shunt trip
suitable for 240 volt AC operation complete
with necessary.
Auxiliary switches, emergency hand trip device
and mechanical ON and OFF indicators.
15/5A ratio, 15 VA, Class 1.0 Resin cast
Current Transformers for metering purposes.
Single phase horizontal draw out type resin
cast line type potential Transformer of 11
kV/110 volts with 15 VA burden complete
connected star / star with fuses as per
requirements
INSTRUMENT PANEL:
1 One 96 mm square, scaled 0-11kV flush type
Voltmeter with 3 way and OFF selector switch.
1
Each
280414.00 N.S.
S.
Nos.
Description
Qty.
Unit
1
Nos
Rate
HSR/ NS
1 One 96 mm square, scaled 0-30 amps, flush
type ammeter with 3 way and OFF selector
switch.
1 One static Triple pole very inverse definite
mean time over current and earth fault relay
with two outer elements connected for over
current protection and the middle element for
protection with adjustable over current and
earth fault setting
Trip circuit supervision relay, trip annunciation
relay & trip circuit healthy relay.
One set of Lock out relay.
One set of Red / Green / Indicating lamps for
close and open indication.
One set of Amber indicating lamp for Trip
circuit healthy indication.
One set of white phase indicating lamps for
phases.
phases
Auxiliary contacts for oil temperature alarm,
and trip.
HT panel as described above complete as per
specification
Transformer
4
SITC of Oil Type transformer complete selff
protected type with indicating lamp and
MCCB control distribution transformer of
400KVA 11/0.433 KV, 3 Phase, 50 Hz , Dyn 11
vector group, outdoor AN type copper wound, with
OFF load tap changing arrangementon HV side in
steps of + 5 % & - 10%, in 1.25 % step with having
cable end boxes on HV side suitable for 3 x 120
Sqmm XLPE cable of 11 KV grade. Cable
termination arrangement on LV side complete with
all accessories with , M.S. channel i/c supplying and
grouting of suitable M.S. channel with all accessories
and confirming to IS 2026, 1976-81 up to the entire
satisfaction of the engineer in charge of the work on
plateform including first filling of oil confirming to IS.
335 as per details specification given as under I/C
cost of RCC plate form of required side for
installation of transformers ETC & as per
specification attached complete in all respects as
required at site.
NO load voltage ratio 11/0.433 KV
N
f h
3
631011.00 N.S.
S.
Nos.
Description
Qty.
Unit
1
Nos
Rate
HSR/ NS
Duty = Outdoor
Vector Group/lSS- DYN-11/IS-2026/77
Fiiting/ accessories Provided = off circuite tape
changer
Externally hand operated
Oil consevation with filling hole &cap
Plain oil Level guage with minimum level
marking
Thermometer pocket
4 no. plain roller uni- directional
silica- Gel Breather
1st fill of oil
drain cum filter valve
Two earth terminal
Lifting arrangement
Exploson vent
Air release plug
Marshaling box
Oil temperature indicator with alarm & trip
indicator
winding temperature indicator with alarm trip
contact
Termination: Hv= 3 pole single glands cable
box suitable for reception of 1 no. 3 core 120
sqmm XLPE cable copper lugs/ thimble
LV side, 4 pole 3 gland cable box suitable
for 3 nos. 300 sqmm 3.5 core pvc cable having
extended copper bar of requisite capacity duty
tinned from L.T bussing for marking connection
with cable including cost of copper lugs and
thimbles
LV. Neutral Suitable box for earthing provided
400 KVA
641771.00 N.S.
HT cables
5
Supply Laying and testing of 3 core stranded
aluminium conductor XLPE insulated armoured
cable 11 KV grade, as per IS 7098 part2 on surface
, Cable trench/hume pipe or on surface fixed on GI
clamps or on cable trey etc as required. The
armouring of the cable shall be properly connected
with earth conductor by clamps etc.
a
120sq. mm 3 core
6
supplying and making INDOOR cable end
termination with heat shrinkable jointing kit complete
with all accessories including lugs suitable for
following size of 3 core, XLPE aluminium conductor
cable of 11 KV grade as required :
120
3
120
M
1663.00
N.S.
S.
Nos.
Description
Qty.
7
Supplying and making OUTDOOR cable end
termination with heat shrinkable jointing kit complete
with all accessories including lugs
suitable for following size of 3 core, XLPE aluminium
conductor
cable of 11 KV grade as required
a
120 sq. mm 3 core
2
Unit
Rate
HSR/ NS
Set
6562.00
N.S.
1809.00
N.S.
873.00
N.S.
SUB STATION SAFETY EQUIPMENT
8
Supplying and fixing following rubber matting
complete as per engineer incharge instruction
a)
Supply and erection of rubber mat of size I
meter x 2 meter, 12 mm thick 1.1 KV duty
tested for 15 KV ISI marked (heavy duty).
9
10
11
12
13
Supplying & fixing standard shock treatment
charts in English & Hindi duly framed and
covered with glass at different locations.
Supply and erection of MS Bucket stand
suitable for 6 numbers fire buckets (but without
b k ) made
buckets)
d out off angle
l off size
i 40 x 40 x 6
mm. including the cost of welding and painting
of complete stand with one coat of red oxide
primer and two coats of approved paint with all
labour and material required to complete the
job in all respect up to the entire satisfaction of
the Enginner-In-Charge.
Supply and erection of fire buckets set (6
number buckets) nine liter capacity made out
of 22 guage GI sheet duly painted with one
coat of red oxide primer and two coats of
approved paints in red color written with fire as
per fire protection, necessary sand filling in the
bucket with stand, with all labour and material
to complete the job in all respect up to the
entire satisfaction of the Enginner-In-Charge.
Supplying and fixing ISI marked Dry powder
fire extinguisher type 10 kgs capacity of
approved make with wall mounting bracketwith
all labour, material to complete the job in all
respect up to the entire satisfaction of the
engineer incharge
Providing & fixing HT /LT danger Notice plate
200 mm x 150 mm made of mild steel at least
2mm thick & enameled white on both sides
and with inscription in signal red colour with
skull & bone on front side as required.
8
1
Each
Nos.
2
Each
3434.00
N.S.
2
Each
1596.00
N.S.
3112.00
N.S.
2
Nos.
4
N
S.
Nos.
Description
14
Providing 11 KV tested hand gloves.
15
Providing first
requirement.
aid
safety
box
as
per
PANEL AND SUB PANEL
16
SITC of M.V. cubical type totally enclosed free
standing type, dust, dump and vermin proof
Main LT Panel complete with bus bars,
Ammeter, Ammeter selector switch, voltmeter,
Voltmeter selector switch, P.F. meter,
indicating lamps, CT's, Interconnection with
suitable capacity of aluminium strips / rods,
connection of incoming and outgoing cables
with thimbles, stove enameled painted and
having following incoming and outgoing ACB/
MCCBs, switch fuse/ fuse with complete as
required.
Main LT Panel
Incoming:
1 Nos. 630A, 415V, Icu = 36kA, 4P MCCB
with Microprocessor based release having ,
Over current setting,Selective short circuit
setting ,instanteneous short circuit ,EARTH
earth fault with adjustable setting,Reverse
power
relay,
Single
phase preventer
protection. KWH meter 10 KVAR Capacitor
with 63A MCCB 36 KA.
1 Nos. 0-500V Digital type Voltmeter with
selector switch.
1Nos. 0-630A Digital type Ammeter with
selector switch with CT's 630/5A
1 set.5P10 class CT's 630/5A for the
protection
3 no. class 1 CT's 630/5A for the metering
1 Nos. 0-630 Ameter with selector switch
1 Set of phase indicating lamps with MCB
protection.
1 Set of indicating lamp to indicate OPEN,
CLOSE, TRIP.SPRING CHARGE. RYB PHSE
INDICATING LAMPS
1Nos. 160A, 415V, Icu = 36kA, TPN MCCB
Qty.
Unit
Rate
HSR/ NS
2
Pair
350.00
N.S.
1
Set
540.00
N.S.
S.
Nos.
Description
Qty.
Unit
1
Set
Rate
HSR/ NS
Outgoing:
1Nos. 200A, 415V, Icu = 36kA, TPN MCCB
with electronic trip unit for over current seting,
selective short circuit setting, instanteneous
short circuit and earth fault with adjustable
setting protection and a set of CT's, ammeter
with ammeter , ,selector switch,KWH METER
,ON/OFF/TRIP Indicating Lamps with MCB.
1Nos. 300A, 415V, Icu = 36kA, TPN MCCB
with electronic trip unit for over current seting,
selective short circuit setting, instanteneous
short circuit and earth fault with adjustable
setting protection and a set of CT's, ammeter
with ammeter selector switch ON/OFF/TRIP
Indicating Lamps with MCB.
2Nos. 160A, 415V, Icu = 36kA, TPN MCCB
with electronic trip unit for over current seting,
selective short circuit setting, instanteneous
short circuit and earth fault with adjustable
setting protection and a set of CT's, ammeter
with ammeter selector switch ON/OFF/TRIP
Indicating Lamps with MCB with KWH meter.
Complete panel described as above
17
150KVAR Capacitor Panel
INCOMER :
1Nos. 400A, 415V, Icu = 36kA, TPN MCCB
with electronic trip unit for over current seting,
selective short circuit setting, instanteneous
short circuit and earth fault with adjustable
setting protection and a set of CT's, ammeter
with ammeter selector switch ON/OFF/TRIP
Indicating Lamps with MCB.
1 Set of phase indicating lamp with MCB
BUS BARS:
400A TPN bus bars of aluminium alloy.
OUT GOING:
1nos. 50 KVAR capacitor bank with 160A TP
MCCB and 160 A Contactor, one set of
indicating Lights and Push Buttons.
3 nos. 25 KVAR capacitor bank with 100A TP
MCCB and 70A Contactor, one set of
indicating Lights and Push Buttons.
1 nos. 15 KVAR capacitor bank with 63A TP
508566.00 N.S.
S.
Nos.
Description
Qty.
Unit
Rate
HSR/ NS
S.
Nos.
Description
Qty.
Unit
1
Set
Rate
HSR/ NS
1 nos. 10 KVAR capacitor bank with 32A TP
MCCB and 25 A Contactor, one set of
indicating Lights and Push Buttons.
Additional space to be provided in each
Capcitor bank copartment for fixing the filters
in future.
1 no. Electronic type Auto matic power factor
correction relay.
Complete panel described as above
18
EMERGENCY PANEL
INCOMER :1
1Nos. 250A, 415V, Icu = 36kA, TP MCCB
with electronic trip unit for over current
seting,
selective short circuit
setting,
instanteneous short circuit and earth fault
with adjustable setting , Revers power ,
protection. KWH Meter with 4 p 250A motor
duity
contactor
with
necessary
relay
compatable with the micro PLC for load
management
1 Nos. 0 - 500V voltmeter with selector switch,
0-250A ammeter with selector switch, and set
of cast resin C.T.'s 250/5A
1 set of Phase indicating lamp with MCB
1 set ON/OFF/TRIP Indicating Lamps with
BUS BARS:
300A TPN bus bars of aluminium alloy.
OUT GOING:
Bus section 1
3 Nos.32A TPN MCCB of 10kA . With on off
indicating lamp as per SLD
4 Nos.63A TPN MCCB.10kA. With on off
indicating lamp as per SLD
1 Nos. 160A 415V, TPN MCCB of 25 KA with
electronic trip unit for overload, short circuit
and earth fault protection as per SLD
3 Nos. 125A 415V, TPN MCCB of 25 KA with
electronic trip unit for overload, short circuit
and earth fault protection as per SLD
512559.00 N.S.
S.
Nos.
Description
Qty.
Unit
1
Set
820816.00 N.S.
3Nos.63A TPN MCCB.10kA. With on off
iindicating
di i llamp
Complete panel described as above
3
Set
145008.00 N.S.
Feeder Pillar-1
INCOMER :
1 no. 63A, 415 Volts, TPN MCCB 10kA with
Thermal magnetic trip unit and ON, OFF, TRIP
Indicating lamps
BUS BARS:
100 A TPN bus bars of aluminium alloy.
OUT GOING:
1 no 40 A TPN MCB 10 KA with 40A TP
contactor and 24 hour timer switch having 4
no. 10/116/20 A SP MCB of 10kA.
3 Nos.32A DP MCB of 10kA .
1
Set
64539.00 N.S.
120
50
270
m
m
m
Rate
HSR/ NS
1 Nos. 160A 415V, TPN MCCB of 25 KA with
electronic trip unit for overload, short circuit
and earth fault protection as per SLD and 1no.
160A Auto transfer switch as per SLD
Complete panel described as above
19
Floor Panel
INCOMER :1
1Nos. 160A, 415V, Icu = 25kA, TP MCCB
with electronic trip unit for over current with
seting,
selective short circuit
setting,
instanteneous short circuit with adjustable,
and earth fault with adjustable setting
protection.
OUT GOING:
2 Nos. 100A 415V, TPN MCCB of 25 KA with
electronic trip unit for overload, short circuit
and earth fault protection
20
21
a
b
c
LT CABLES AND TERMINATIONS
Supplying, laying, testing and commissioning
of 1100 volt grade XLPE insulated, PVC
sheathed, aluminium conductor, armoured
cable laid on existing cable trays / walls/ pipe
including the cost of saddling and clamping
and including the cost of dressing to ensure
minimum 1 cable diameter spacing between
adjacent cables etc. complete as per
specifications, as required and as below.
3 -1/2 core 300 Sq mm
3 -1/2 core 240 Sq mm
3 -1/2 core 150 Sq mm
#REF!
#REF!
#REF!
N.S.
N.S.
N.S.
S.
Nos.
Description
f
g
h
i
j)
k)
l)
m)
3 -1/2 core 50 Sq mm
4 core 25 Sq mm
4 core 16 Sq mm
4 core 10 Sq mm
4 core 6 Sq mm
4core 4Sq mm
2 core 6 Sq mm
2core 4Sq mm
22
Supplying, laying, testing and commissioning
of control cable 6 core 1.5 sq.mm. PVC
insulated copper conductor 1.1 KV grade,
armoured control cable in trench/ on cable tray
as required complete in all respect.
23
a)
b)
c)
d)
e)
f)
g)
h)
j)
k)
l)
m)
Supply and erection of Cable end termination
XLPE insulated 1100 Volt grade cables
including the cost of crimping tinned copper
heavy duty lugs, double compression glands,
insulation tape etc. complete as required and
as below.
3 -1/2 core 300 Sq mm
3 -1/2 core 240 Sq mm
3 -1/2 core 150 Sq mm
3 -1/2 core 120 Sq mm
3 -1/2 core 70 Sq mm
3 -1/2 core 50 Sq mm
4 core 25 Sq mm
4 core 16 Sq mm
4 core 6 Sq mm
4core 4Sq mm
2 core 6 Sq mm
2core 4Sq mm
Qty.
Unit
Rate
HSR/ NS
180
130
155
150
10
10
10
10
m
m
m
m
m
m
m
m
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
#REF!
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
50
RM
#REF!
N.S.
8
4
14
10
NO.
NO.
NO.
NO.
NO.
NO.
NO.
NO.
NO.
NO.
NO.
NO.
867.00
771.00
458.00
383.00
297.00
262.00
192.00
188.00
146.00
146.00
110.00
110.00
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
10
2
6
12
2
6
4
S.
Nos.
Description
24
Supplying and fixing of powder coated
Perforated Type Cable Tray system including
fittings and accessories fabricated from
minimum 2 mm thick CRCA MS sheets
including the cost of powder coating of
approved shade of minimum 50 microns film
thickness on MS surface cleaned and
prepared with 7 tank process and including the
cost of support arrangement of approved
design fabricated from MS angles/flats/rods
including jointing the steel sections of the
support arrangement with nuts & bolts /
welding and including securing the support to
the structural ceiling by dash fasteners at
spacing as per site conditions to prevent
sagging of trays and including painting with two
coats of primer paint etc., including 25x3mm GI
stip both side of the cable tray . complete as
per specifications, as required, and as below.
a)
150 mm x 50 mm x 50 mm and 2 mm thick
b)
Qty.
Unit
Rate
HSR/ NS
40
Per mtr
482.00
N.S.
40
Per mtr
663.00
N.S.
300 mm x 50 mm x 50 mm and 2 mm thick
c)
450 mm x 50 mm x 50 mm 2 mm thick
50
Per mtr
853.00
N.S.
d)
600 mm x 50mm x 50 mm 2 mm thick
40
Per mtr
1013.00
N.S.
25
EARTHING
(i)
Earthing with GI earth pipe 4.5 meter long and
40 mm. dia. With masonary enclosures on the
top etc. as required.
Extra for using salt and Charcoal / Coke for
pipe earth electrode as required.
Earthing with GI earth plate 600 x 600 x 6 mm.
thick including accessories and providing
masonary enclosures with cover plate having
loacking arrangement and watering pipe etc
(but without Charcoal or Coke and salt)
complete as required.
Providing and fixing 4.00 mm. dia. GI wire on
surface or in recess for loop earthing as
required.
Supplying and laying 25 x 6 mm. GI strip at 0.5
meter below ground as strip earth electrode
including soldering etc. as required.
(ii)
(iii)
(iv)
(v)
(vi)
(vii)
Providing and fixing 25 x 5 mm GI strip on
surface or in recess for connection etc. as
required with all labour and meterial.
Providing and laying earth connection from
earth electrode with 4.00 mm. dia. GI wires in
15 mm dia GI pipe from earth electrode as
4
Each
378.00
31.22-i
4
Each
125.00
31.22-ii
12
Each
453.00
31.22-iii
450
Per mtr.
3.40
31.22- xvi
200
Per mtr.
18.20
31.22-ix
200
Per mtr.
20.30
31.22-xv
S.
Nos.
Description
Qty.
(viii)
Excavation earth pit 180 cm. round at top and
90 cm. at bottom 4.5 meters deep and refillng
the same in plains including supply of
necessary charcoal / Coke and salt mixture.
(ix)
Supply and erection of GI tape 32 x 6 mm.
thick from earth electrode directly to ground
and surface fixed with GI stapples of same
size.
providing & fixing 25mmx5mm GI strip
in40mm dia GI pipe from earth electrode as
required.
(x)
26
27 (ii)
Rate
HSR/ NS
12
Each
254.00
31.23-ii
100
Per mtr.
32.60
31.24-vii
100
Per mtr.
65.10
31.22-xi
Each
1149.00
31.22IV
400
mtr
117.00
31.22XIV
400
mtr
155.00
31.22X
15
mtr
59.00
15
mtr
42.00
15
mtr
31.00
1
Set
Earthing with Tinned copper earth plate 600 x
600 x 3 mm. thick including accessories and
providing masonary enclosures with cover
plate having loacking arrangement and
watering pipe etc (but without Charcoal or
Coke and salt)etc. complete as required.
4
27 (i)
Unit
Providing and fixing 25 mm x 5 mm copper
strip on surface or in recess for connections
etc. as required with all labour and materials.
Providing and fixing 25 mm x 5 mm copper
strip in 40mm dia GI pipe from earth electrode
as required.
28
Supply and errection of PVC pipe 6 Kg
pressure laid I ltr. Below ground level complete
including digging refilling of trench with jointing
etc.
a
120 mm dia
b
80 mm dia
c
65 mm dia
31.21
-XXX-(a)
31.21
-XXX-(b)
31.21
-XXX-(c)
DG SETS
29
Supplying, installation, erection, testing and
commissioning of air cooled Diesel Engine with
rated capacity of 160 KVA at 0.8 P.F., 1500
RPM. 4 stroke, multicylinder coupled to brush
less type 415 volts 50 cycle/second self exited
alternator completed with cushy padds,
domestic silencer, exhaust pipe complete with
Alternator auxiliaries, Radiator,fuel tank.
electronic governer(pcc1301) , 24 volts
chargable battery including initital charging of
batteries, control panel with acuastic inclouser
complete as per specification.
Exhaust Pipe
1174350.00 N.S.
S.
Nos.
Description
Qty.
30
Design, fabrication, erection, connecting of
exhaust system comprising of following Class
B MS pipes including the cost of flanges, short
bends, long bends, nuts and bolts, gasket duly
lagged with 50mm thick rock wool along the
circumference of the pipe, duly tightened with
chicken wire mesh wrapped with 24 gauge
aluminium sheet complete in all respects.
a)
125 mm dia
30
Unit
RM
Rate
HSR/ NS
3299.00
N.S.
5450.00
NS
Miscellaneous Items
31
Supply, installation, testing and commisioning
of Main Gate Light luminaries with "JUNO
INTEGRAL" post top lantern in LPF version
only brown painted LMG alloy cylindrical
spigot, decorative, acrylic bowl supported by
spun aluminium top cover accessories with
HPSV lamp 70 Watt (T) on 50 mm.. dia. GI
pipe (B-Class) embedded in RCC pillar of main
gate along with suitable size of PVC pipe for
cable connection in wheather proof MS box of
size 20 cm. x 15cm. x 10 cm. covered with 3.0
mm thick MS sheet hinged covered and
mm.
gasket with cable entry, locking arrangement
housed in 1:2:4 cement concrete muff
includung suitable size of PVC pipe for
incoming and outgoing cables including the
cost of 1 no. 16 Amp. 415 Volt kit-kat and 4way 32 Amp. Bakelite connectors mounted on
Bakelite sheet in the MS box with painting and
other petty material required for necessary
connection etc. to complete the job in all
respect up to the entire satisfaction of the
Enginner-In-Charge. BAJAJ product code
161583 BJ ODCJ- 1170-SVLPF/ HPSV T 70
Watt, Havells LHLY 10140C99, LHBW
20140036. Or equivalent other make PHILIPS ,
3 nos.
CROMPTON GREAVES)
Each
S.
Nos.
32
33
34
35
Description
Qty.
Unit
Rate
Fencing of Electric sub station with steel fabric
jali size 1"x3"of 5mm thick MS wire and jali
frame of MS angle of size 40x40x6 mm , M.S.
flat 40 x 6 mm. including grouting / fixing of jali
size 1.80 m. x 1.68 m. in constructed brick
masonary work including excavation of earth
work CC 1:4:8 in foundation . 1st class brick
work in cement 1:5 in step as per drg./ site
condition and CC 1:2:4 on DPC 40 mm.
thick ,brick work in cement 1:4 for pillar height
upto 1800 mm. & 25mm. thick CC 1:2:4 on top
of pillar wall with cement plaster 1:5 on wall
with approved colour scheme for brick
masonary wall and paint with one coat of red
oxide primer & two coat approved paint on MS
work as per requirement to complete the job in
all respect as approved and upto the entire
satisfaction of the Engineer - in - charge .
Supply erection of 48" ceiling fan with hanging
rod of 1' To 3' with Hanging hook and control
wiring and all necessary conection complete
in all respect up to the entire satisfation of the
engineer incharge
Supply and errection of Fabrication MS, Angle,
Flat, Channels Including cost of of Nut and
bolt with paint, one coat red oxide primer and
two coat paint as per ingineer incharge
instruction plete in all respect up to the entire
satisfation of the engineer incharge
Supply , laying testing commioning of PVC
insulated and sheathed 2 core x 2.5 sqmm
copper ciscular wire 650/1100 volt grade
confirming to IS 694/1990 and ISI marked for
connection of the Street light luminariers Etc,
with alll labour and materials to complete up to
the entire satisfation of the engineer incharge
HSR/ NS
35
sqr mtr
2085.00
N.S.
36
no.
1804.00
N.S.
200
KG
97.00
N.S.
250
Mtr
48.00
N.S.
25
No.
161.00
N.S.
36
Supply and fixing of 18/11/10 watt CFL lamp (
Havels, HPL make)
37
Providing , laying and fixing following dia G.I
Pipe ( medium class) in ground complete with
G.I fittings including trenching (75cm deep)
and refilling etc as required
a
100 mm dia
5
mtr
436.00
N.S.
b
150 mm dia
10
mtr
546.00
N.S.
S.
Nos.
Description
38 (a)
Supply and erection of Epoxy powder coated
die-cast aluminium housing with weatherproof
gasket
for
lamp
and
control
gear
accessories.Cast aluminium frame with heat
resistant toughened clear glass fixed with SS
screw. Control Gear for ( 2x12 W) LED total 24
W LED 6K with HF electronic driver at 700 mA
LHR D01124674 lamp prewired upto the
terminal block. LED specification – make High power CREE LED Colour temp. - 6500 º
K Lens – Individual lens for each LED.Side
entry mounting for 35 mm OD pipe
bracket.Degree of protection IP 65 protection
rating. Or equivalent make Bajaj, Philips,
Crompton Greaves. 2.5 Meter long G I pipe 50
mm dia ,PVC pipe & MS Box 20 x 15 x 10 cm .
having Kit - Kat , With the 150mmx150 mm 3
mm thick base plate and 10 mm fastner
complete connections and petty material etc.
as per site requirment
38 (b)
39
Qty.
Unit
Rate
HSR/ NS
7
No.
13359.00
N.S.
15
No.
12869.00
N.S.
7
No.
15590.00
N.S.
Supply and erection of Epoxy powder coated
die-cast aluminium housing with weatherproof
gasket
for
lamp
and
control
gear
accessories.Cast aluminium frame with heat
resistant toughened clear glass fixed with SS
screw. Control Gear for ( 2x12 W) LED total
24 W LED 6K with HF electronic driver at 700
mA LHR D01124674 Lamps prewired upto the
terminal block.LED specification – make - High
power CREE LED Colour temp. - 6500 º K
Lens – Individual lens for each LED.Side entry
mounting for 35 mm OD pipe bracket.Degree
of protection IP 65 protection rating. Or
equivalent make Bajaj, Philips, Crompton
Greaves. in all respect upto the entire
satisfaction of Engineer-in-charge.
1) 6mtr height OP with top 70mm and bottom
100mm sheet thickness 3mm and base plate
220 x 220 x 12mm thick.
2) Foundation bolt M20 x 600mm in C:C. 1:2:4
in foundation as per required.
3)500mm long SA bracket.
4)
Pole to be fixed at boundry wall
S.
Nos.
Description
Qty.
40
Supply, installation, testing and commissioning
of maintenance free electrolytic earthing
system with 10 feet's rod, 2 inches dia, 2mm
thick that does not require manual addition of
water. The system should be stable operation
for at least 30 years. The electrode shall be
electrolytic grade copper rod pre-filled with
hygroscopic powder and provided with suitable
breathing and leaching ports at the ends. The
electrode shall be surrounded by suitable
powdered form of backfill so as to provide
maximum contact between the electrode and
the backfill. The earthing pit shall be provided
with suitable sturdy test well for observation.
41
Supply and erection of street light bracket of
35mm (OD) dia GI pipe of B Class of length
1.25mtr. With 10-150 bends as required at site
with 3mm thick MS base plate size 1'x 9" fixe d
on wall with 4 nos. 10mm thick 4" long good
quality fastner, 4 nos. MS nuts and bolts of size
10mm thick 2" long, Nuts welded in the base
plate for fixing the bracket with 2 nos. half
clamps of 25mm x 3mm MS flat and all petty
materials required to complete the job in all
respect upto the entire satisfaction of Engineerin-Charge of the work.
42
Supply and errection of PVC pipe of ISI
marked (medium recessed in wall / ceiling etc
including the cost of PVC bands, inspection
boxes . Iron hooks and cement concrete ETC
comlete in all respect up to the entire
satisfation of engineer incharge of work
a
b
PVC Pipe of 32 mm dia
PVC Pipe of 40 mm dia
43
Miniature Circuit Breaker and Isolator
Supply and erection of Miniature Circuit
Breaker / Isolator 240-415 Volt in the existing
distrribution board including making necessary
connection .
Miniature Circuit Breaker of 9 KA breaking
capacity
6 -32 Amp. (Single Pole)
6 -32 Amp. (SPN)
40 -63 Amp. (TPN)
(a)
(i)
(ii)
(iii)
Sheet Steel Enclosure:
Supply and erection of sheet steel enclosures
distribution board suitable for MCB's etc. on
wall / existing board / Pedestal with ragbolts
i l di b di t
th
Rate
HSR/ NS
2
No.
25179.00
N.S.
15
No.
967.00
N.S.
50
50
mtr
mtr
45.00
56.00
31.58 a
31.58 b
10
2
Each
Each
95.00
197.00
31.17 a-i
31.17 a-ii
499.00
31.17 a-iii
2
44
Unit
Each
S.
Nos.
(i)
Description
Qty.
Distribution board four way (SPN)
2
Unit
Each
Rate
HSR/ NS
263.00
31.12 d-iv
S.
Nos.
Description
Qty.
(ii)
Distribution board four way (TPN)
45
Supply , and errection of of PVC unsheathed
copper conductor cable single core 1100 V
grade in pipe of suitable size excluding cost
and errection of pipe.
(i)
(i)
(i)
(i)
(i)
cable size 1.5 sq. mm. (3/0.81 mm)
cable size 2.5 sq. mm. (3/1.05 mm)
cable size 4 sq. mm. (7/0.85 mm)
cable size 6 sq. mm. (7/1.05 mm)
cable size 10 sq. mm. (7/1.35 mm)
46
Supply and errection of pipe for wiring purpose
including bends inspection boxes etc , where
necessaty and painting as required
i)
Heavy gauge welded conduit pipe 20 mm dia
1.6 mm thickness on surface
ii)
Heavy gauge welded conduit pipe 25 mm dia
1.6 mm thickness on surface
iii)
Heavy gauge welded conduit pipe 32 mm dia
1 6 mm thickness on surface
1.6
47
a
32 mm dia
40 mm dia
48
Supply and erection of pre stressed cement,
concrete pole as per IS 1678,1960
11 meter long 152 mm x 203 mm at top and
152 mm x 368 mm at bottom with working load
of 360 Kg. burried 2.20m in ground
49
100
100
100
100
100
Rate
HSR/ NS
Each
692.00
31.12 d-iv
Per mtr.
Per mtr.
Per mtr.
Per mtr.
Per mtr.
10.20
16.30
24.50
35.60
50.00
31.40 I
31.40 II
31.40 III
31.40 IV
31.40 V
25
Per mtr.
14.90
25
Per mtr.
18.40
100
Per mtr.
23.20
HSR
31.21
XV
HSR
31.21
XV
HSR
31 21
31.21
XVIII
100
mtr
18.00
N.S.
25
mtr
24.00
N.S.
1
Each
1987.00
31.30(VIIII)
5
No.
8377.00
N.S.
Supply and errection of PVC flexible pipe of
good quality comlete in all respect up to the
entire satisfation of engineer incharge of work
b
i
2
Unit
SITC OF flood light as per site incharge
instruction Pierlite PGL08- 400 watt flood light.
Outdoor integral floodlight with aluminium
pressure diecast housing, asymmetrical optics
with all accessories. Suitable for HPSV & MH
lamp. With IP 54 protection. cat no.
HCGL5400MCAST Or equivalent other make
Bajaj
,Crompton
Greaves/Philips/Pierlite/Havells.
S.
Nos.
50
51
51(a)
51(b)
Description
Qty.
Supply and erection of recess mounting CFL
low glare luminaires with paralite P5 Louvers of
2 x 23 Watt capacity along with 2 nos. 36 watt
CFL to be fixed on False Ceiling and all other
petty material required to complete the job in
all respect upto the entire satisfaction of
Engineer-in-Charge.
Make: Bajaj - 530077 BMLA 01236 CFL WEB2
or
other
equivalent
Make:
Crompton
Greaves/Philips/Pierlite/Havells.
Supply and erection energy efficient T-5, 28
Watt flourescent tubelight fittings with clear
acrylic cover and accessories with 1 no. T-5 28
Watts tube rods and other materials required
to complete the job in all respect upto the
entire satisfaction of Engineer-in-Charge.
Make:
Crompton
Greaves/Philips/Osram/Havells.
Supply and erection energy efficient T-5, 14
Watt flourescent tubelight fittings with clear
acrylic cover and accessories with 1 no. T-5 14
Watts tube rods and other materials required
to complete the job in all respect upto the
entire satisfaction of Engineer-in-Charge.
Make:
Crompton
Greaves/Philips/Osram/Havells.
Supply and erection energy efficient T-5, 28
Watt flourescent tubelight fittings and
accessories with 1 no. T-5 28 Watts tube rods
and other materials required to complete the
job in all respect upto the entire satisfaction of
Engineer-in-Charge.
Make:
Crompton
Greaves/Philips/Osram/Havells.
Unit
Rate
HSR/ NS
15
No.
3695.00
N.S.
15
No.
828.00
N.S.
15
No.
643.00
N.S.
15
No.
559.00
N.S.
S.
Nos.
52
53
Description
Qty.
Supply and erection of exhaust fan heavy duty
of size 250/300mm operated at 180/ 220Volt
AC supply and other materials required to
complete the job in all respect upto the entire
satisfaction of Engineer-in-Charge.
Make: Crompton Greaves/Havells.
Supply and erection of weather proof MS box
on surface / recess of size 20cm x 30cm x
10cm covered with MS sheet hinged cover
having locking arrangement fixed on wall
including cost of 4 nos. copper bus bars of size
20mm x 3mm, 125mm duly tinned insulated
and supported with porcelain insulator, 2 nos.
16 Amp. 415 volt Kit kat, fixed in the MS box
including painting etc. complete in all respect
upto the entire satisfaction of Engineer-inCharge.
Make: Crompton Greaves/Philips/Havells.
Unit
Rate
HSR/ NS
18
No.
1647.00
N.S.
18
No.
717.00
N.S.
Executive Engineer
Housing Board Haryana
Gurgaon
S.
Nos.
Description
Qty.
Unit
Rate
HSR/ NS
S.
Nos.
Description
Qty.
Unit
Rate
HSR/ NS