www.takfanmakina.com.tr
Takfan Machinery and Mould Co Ltd.
Plug in
Bushing
LV Monoblock
RMU
Bushing
4 Way CT
Terminal
“Solution Partner of Medium Voltage Insulation and Epoxy Casting”
Design
Takfan Machinery and Mould Co Ltd.
*Medium voltage Switching Equipments Design
*Load Break Switch Design
*Epoxy Casting Load Break Switch Design
*Stainless Steel Load Break Switch Design
*Earthing Switch Design
*Metal Enclosed Switchgear Design
*Gas Insulated Switchgear Design
*Gas Insulated Compact Switchgear Design
*Sectionaliser Design
*Recloser Embedded Pole Design
*Gas Insulated Recloser Design
*Metal CLAD Switchgear Design
*Rotary Disconnector Design
*High Voltage Disconnector Design (Single and 3 Phase)
*Vertical Break Disconnector Design
*Double Break Disconnector Design
*Knee Type Disconnector Design
*Phantograf Type Disconnector Design
*Centre Break Type Disconnector Design
*M.Clad H.V Earthing Switch
*Fuse Holder Design
*L.V Compansation Panel Design
*Prefabricated Substation Design
ISO 9001:2000
1
Cast Resin Monoblock
MONOBLOCK
TAKFAN we design, tool and manufacture monoblocks for
the electrical distribution industry. From start to finish, we
have complete control of the process with everything
designed, manufactured and tested in-house.
TECHNICAL PROPERTIES
Takfan Machinery and Mould Co Ltd.
1.1 kV
800 A - 1400 A
2100 A
800 A - CODE NO: TMNB-1.1 - 800
1400 A - CODE NO: TMNB-1.1 - 1400
ISO 9001:2000
Monoblock Bushing Conductors
Bushing conductors for the fourpole combined bushing
assemblies are made from 63mm
x 12mm high conductivity copper
bar having fully radiused edges,
with the whole of the outer ends
electro-tinned in accordance with
class Sn 2C of Standart EN 50386
- EN 50336 - EN 62199
2100 A - CODE NO: TMNB-1.1 - 2100
SINGLE PHASE
Material: Epoxy
Main Bar Material EL.Cu.
Tin Plated
2
From 630 A
To 4500 A
Plug in Bushing
Takfan Machinery and Mould Co Ltd.
BUSHING
INDOOR TYPE TRANSFORMER PLUG IN
BUSHINGS and RMU BUSHING
EXPLANATION: All type Plug in Bushing and RMU
Switchgear Bushing produce for standart type sılıcone
cable connector from 12 to 36 kV and from 250 A to 1250
A as plug in or screw connection.
DESIGN: All type Plug in Bushing wes product according
12 - 24 - 36 kV
250 A - 1250 A
to EN 50181 as until 400A Plug in and the other Amp
screw connection.
Material: Epoxy
Connection Type Plug in Contact (Ag
24 kV / 250 A PLUG IN BUSHING
Plated)
Main Bar Material El.Cu
ACCESSORES: Potection
Cover,Earthing Cable, Braas
Washers. Braas Nut, Connection
Ring and Connection Parts, Gasget
and Package
ISO 9001:2000
DIMENSIONS (mm)
L
Plug in Contact
L1
24 kV / 250 A STANDART
223 108.5
24 kV / 250 A SHORT TYPE
188
73.5
TECNICAL PROPERTIES: Insulation material is Epoxy Resin which has 90°C/115°C Tg mixing all different
materials Resin, Hardener, Accelareter, Flexibleizer and silen by TAKFAN. All spare part and insert product
by TAKFAN. Main bar product for Electrolitic Cooper and plated silver ın the same time Plug in Contact
product by TAKFAN –All insert material as Brass.
3
Plug in Bushing
Takfan Machinery and Mould Co Ltd.
36 kV / 400 A PLUG IN BUSHING
Material: Epoxy
Connection Type Plug in Contact
(Ag Plated)
Main Bar Material El.Cu
USING AREAS: Plug in Bushing could use
ACCESSORES: Potection
inside of Distrubition Transformer with oil and
Cover,Earthing Cable, Braas
the other silicon cable connection using area.
Washers. Braas Nut, Connection
Ring and Connection Parts,
DIMENSIONS (mm)
L
L1
36 kV / 400 A STANDART
316
36 kV / 400 A SHORT TYPE
243
L2
M
D1
D2
D3
127
41.5 M16 O88
O70
O45
72
23.5 M12 O74
O59
O38
Gasget and Package
36 kV / 630 A PLUG IN BUSHING
ISO 9001:2000
(Bolted Type)
Material: Epoxy
Connection Type Plug in Contact
(Ag Plated)
Main Bar Material El.Cu
ACCESSORES: Potection
Cover,Earthing Cable, Braas
Washers. Braas Nut, Connection
Ring and Connection Parts,
Gasget and Package
STANDARTS : Plug in Bushing was product according
to TSEN 50180, TS EN 50181 ,EC 60137 standarts
TEST: All type bushings tested by TAKFAN Quality
Persons as %100.
4
RMU Bushing / 4 Way CT Terminal
RMU BUSHING
Takfan Machinery and Mould Co Ltd.
TECHNICAL PROPERTIES
Insulation material is Epoxy Resin which has
90°C/115°C Tg mixing all different materials resin,
12 - 24 - 36 kV
250 A - 1250 A
Hardener, Accelareter, Flexibleizer and silen by
TAKFAN. All spare part and insert product by TAKFAN.
Main bar product for Elektrolitic Cooper and plated
silver in the same time Plug in Contact product by
Material: Epoxy
TAKFAN –All insert material is Brass.
Main Bar Material EL.Cu.
ACCESSORES: Potection Cover,
O- Ring and Package
USING AREAS: Ring Main Unite Switchgear.And the other silicon cable connection using area.
STANDARTS : Plug ın Bushing was product according to TSEN 50180, TS EN 50181 ,EC 60137 standarts
4 Way CT Terminal Block Test
4 WAY CT TERMINAL
The terminal block shall be air pressure
leak tested at 1 bar for 15 minutes, where
ISO 9001:2000
there should be no signs of air leakage.
Parts are identified with a unique
identification serial number with full
traceability to materials used and date of
manufacture. Resin with four brass
Inserts with M6 thread on each end, and
two chamfered holes to allow it to be
bolted down to the tank.
It is required to use the correct amount of
nuts and washers to suit the correct
number of CT terminals being used
Material: Epoxy
Main Bar Material Braas
5
TECHNICAL PROPERTIES
Mould and Mould Polishing
SF6 Circuit Breaker Pole Mould
Recloser Pole Mould
Takfan Machinery and Mould Co Ltd.
Monoblock Mould
*From 12 kV 36 kV Bushing mould
*From 12 kV 36 Kv Circuit Breaker Poles
*Fuse holder ( with primer opening system)
*Circuit Breaker Insulator Pole Mould
*Insulator Mould
*Insulation Arm Mould
*Insulation Materials Mould
TAKFAN Machinery and mould co which is partner with global player of Energy producer Area in Turkey
was serviced for your Company about mould producing and polishing with own specialist persons.
*Load Break Switch
*SF6 Disconnector
*Metal CLAD wall Bushing Moulds
TAKFAN Machinery and mould co was produced mould ,clamping machines ,mixer and vacuum oven
with our specialist persons. TAKFAN has all production process from desing to product .We solve your
all problem for Epoxy materials and casting and moulding process component for Medium and High
Voltage.
Cilicon Mould
Fuse Holder Mould
*Low Voltage Insulation parts
Polyester BMC ve SMS Mould
From technical drawings or sample to mould and realy mould component ıs our specials ways TAKFAN
has CAD/CAM ( Unigraphics NX ) programs which use for %100 customer needs to provided suitable to
drawings and samples.
CNC Workshop
Epoxy Plant
Test Laboratory
ISO 9001:2000
6
“Solution Partner of Medium Voltage Insulation and Epoxy Casting”
Takfan Machinery and Mould Co Ltd.
APG Injection Plant
Epoxy Vacuum Casting Plant
MV
CT & VT
Dry Type
Power
Transformer
APG Clamping
Machine
Center
: Bakırlı Mahallesi Nazım Demirci Cad
No:374 Kartepe / KOCAELİ - TURKEY
Phone
Fax
: +90 262 371 25 28 - 29 pbx
: +90 262 373 37 21
ISO 9001:2000
www.takfanmakina.com.tr
takfan@takfanmakina.com.tr