MSDS: WET LEAD ACID STORAGE BATTERIES

advertisement
MSDS: '&*ǃ)6*
Material Safety Data Sheet
SEALED GEL LEAD ACID STORAGE BATTERIES UN 2800
Issue Date December 2012
COMPANY DETAILS
Company name
Fullriver Battery Manufacture Co., Ltd.
Address
P.O.BOX 511475
Taishi industrial Area, Yuwotou Town,Panyu Zone, Guangzhou, China
Telephone / Fax
Telephone: 86-20-84916671 Fax: 86-20-84916672
Website
http://www.fullriver.com
IDENTIFICATION
Product name
DCG
FSG
Proper shipping name DCG FSG
Chemical/trade Name(as used on label):
Absorbed Electrolyte Battery ; Sealed Valve Regulated Gel Battery
UN number
DG class
Packing group
Hazchem code
Poisons schedule
Product use
2800
Class 8 SP 238 Subsidiary Class 6.1 (a) Special Provision clause A67
111 (EPG 8A1)
4Y (black on white) E
Not scheduled
Sealed lead acid batteries for use in standby, starting and solar / remote
area and other cycling applications.
Physical Data
Boiling point
Vapour pressure
Vapour density
Solubility in water
Appearance & odour
Specific gravity
N/A
N/A
N/A
N/A
N/A
1.260kg per cubic metre. High rate units may contain 1.300kg per cubic
metre.
Percentage volatile by volume
N/A
Evaporation rate
N/A
Flammability Data
Flashpoint
Flammable limits
N/A
Hydrogen
Lower explosive limit 4%
Upper explosive limit 74%
Unusual fire & explosion
Will generate hydrogen and sulphuric acid mist on overcharge.
Hazards
Case material is ABS (acrylonitrile butadiene styrene) and will give off
copious amounts of black sooty smoke when ignited in a major fire.
MSDS: SEALED GEL LEAD ACID STORAGE BATTERIES
Page 1
MSDS: DCG、FSG
Ingredients
Ingredients
Chemical Entity (of grids)
Lead (or compounds)
Antimony
Tin
Selenium
Silica
Copper
Sulphuric acid
Plastic battery case
%by
Weight
70-75%
0%
0.4
0
1.5
0.7
20-30%
7:$ÿV
(mg/m3)
0.5
1
CAS No.
7664939
HEALTH HAZARD INFORMATION
Health Effects
Acute ̢
There is no possibility of exposure to lead, etc. unless the battery is
destroyed. Sulphuric acid mist causes coughing and will burn eyes and
skin.
First Aid
Skin
Action:
Skin contact: possible if the battery electrolyte is splashed. Battery
electrolyte is corrosive to skin.
Treat as an acid burn. Remove from source; remove contaminated
footwear and clothing immediately. Wash with soap and water.
Obtain medical attention.
Eyes
Action:
Eye contact: possible if the battery electrolyte is splashed.
Treat as an acid burn. Remove from source; remove contaminated
clothing immediately. Flush eyes thoroughly with tepid water for 15
minutes, lifting eye lids regularly.
Obtain urgent medical attention.
Inhalation
Action:
Inhalation: possible from toxic fumes when involved in fire.
Remove patient to ventilated area and lay down. If not breathing,
commence cardiac pulmonary resuscitation (CPR).
Obtain urgent medical attention.
Ingestion
Ingestion: possible via hand contaminated by contact with lead or acid
components of the battery.
Do not induce vomiting, keep calm and quiet. Drink copious amounts of
water. Obtain urgent medical attention.
Action:
MSDS: SEALED GEL LEAD ACID STORAGE BATTERIES
Page 2
MSDS: DCG、FSG
PRECAUTIONS FOR USE
Personal Protection
Personal Protection
Acid resistant clothing, made with neoprene or PVC is recommended,
including gloves and aprons. Splash-proof chemical safety goggles or a
face shield should be worn for eye and face protection when working with
cells. Appropriate respiratory protection should be worn when mist (e.g.
following excessive overcharge) exceeds permissible limits.
SAFE HANDLING INFORMATION
Storage and Transport
Storage Precautions
Transport Handling
Transport
Keep inside a well ventilated building at moderate temperatures.
During transport, the batteries are kept in wooden or cardboard /
polystyrene packaging. Considerable care should be exercised when
handling the batteries due to their weight and the relative fragility of the
case. Do not use the terminal posts for handling or lifting the cells or
batteries. When supplied, plastic handles should be employed.
Battery Energy sealed lead acid batteries are classified in Australia as
non dangerous goods for road transport. For air transport, they are
classified as suitable under IATA Dangerous goods regulation Special
Provision clause A 67.
Spills and Disposal
Spills or Leaks
Disposal
In the event of a spill or a leak avoid breathing the vapour / fumes and
avoid contact with the skin.
Wear protective clothing, acid resistant boots, gloves, face shield and
goggles. If SAFE stop the source of the leak. Evacuate and limit access
to area. Remove combustible material and all sources of ignition. No
smoking or naked flames. Isolate the spill and dilute with water then
neutralize with sodium carbonate or sodium bicarbonate. Advise the
Police and Fire Brigade of location, type of product and quantity of spill.
When neutralized collect residue and place in a suitable container
labelled as containing hazardous waste. Treat refuse as hazardous
waste when disposing.
Do not release hazardous waste into drains, sewers or the environment.
Special Precautions
Special Precautions
Keep away from sources of ignition during and immediately following
charge. Use insulated tools when working with cells. In confined areas
place the shroud cover on the inter-cell connections or on the cell top as
soon as is practicable.
MSDS: SEALED GEL LEAD ACID STORAGE BATTERIES
Page 3
MSDS: DCG、FSG
Fire / Explosion Hazard
Fire/explosion hazard N/A
Firefighting
LEL = 4.1% (Hydrogen gas in air)
Procedures
U2EL = 74.2%
Extinguishing media CO2: foam, dry chemical
Hazardous
Sulphuric acid is water-reactive if concentrated
Reaction Hazchem code
4Y (black on white) E
IMPORTANT ADVICE:
This MSDS summarises our best knowledge of the health and safety hazard information of the
product and how to safely handle and use the product in the workplace. Each user should read
this MSDS and consider the information in the context of how the product will be handled and
used in the workplace including its use in conjunction with other products. If clarification or further
information is needed to ensure that an appropriate risk assessment can be made, the user
should contact Fullriver Battery Manufacture Co., Ltd. Our responsibility for products sold is
subject to our standard terms and conditions, a copy of which is sent to our customers and is also
available on request.
End of MSDS
MSDS: SEALED GEL LEAD ACID STORAGE BATTERIES
Page 4
Download