Customer:
Date:
Project:
Qty:
Type:
M36
LED Direct Quickship
QL36
Order Code:
QL36
-
1A35
Series
-
-
LW
-
F
-
-
WH
-
UNV
-
QL36
M60 LED Direct
Quickship
1A35
Light Engine
1A351
CCT
30
3000K
LW
Shielding
LW
Mounting
F2
Nominal
Fixture
Length
02
Finish
WH
Voltage
UNV
Driver
DIM3
F
WH
UNV
Values calculated from a 4’ fixture @ 3500K using LW
Shielding and DM driver.
For additional information please see page 5
1 657 lm/9.0W
per foot
35
3500K
LED Optimized
white lens
Over 8’ supplied with 2 or more housings that are joined
in the field
2
Surface Mount
2 ft.
04
4 ft.
06
6 ft.
08
XX
8 ft.
Individual fixtures and Runs are supplied in nominal lengths to ensure full,
even illumination. See page 2 for additional details.
Runs (over 8’) available in 1 ft nominal increments
Replace the “XX” with the footage (I.E. 09=9’ nominal)
White
120 thru 277
50/60hz capable
0-10V
(Linear)
DM3
DML 3
eldoLED
eldoLED
SOLOdrive 0-10V SOLOdrive
(Linear)
0-10V
(Logarithmic)
DC33
Lutron 3-Wire
DCE3
3
See page 4 for full details
Lutron Eco-System
Product Modifications
Approvals
Please list modification requirements for review by factory:
5
YEAR
LED WARRANTY
ARRA
Compliant
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 1 of 5
(Rev. 06/2016)
QL36_Direct_ss_v1.31
M36
LED Direct Quickship
2 13/16”
(72mm)
1 5/16”
DIFFUSER
(34mm)
LOUVER
1 / ”
7 16
(37mm)
Construction:
Housing - Continuous, low copper 6063-T6
extruded aluminum profile with aluminum
end caps, available as individual fixtures or runs.
Geartray - Low copper 6063-T6 extruded
aluminum profile.
Shielding - Extruded, impact resistant acrylic
lens:
- LED optimized white lens (LW)
Mounting(s) - Surface mounting (see page 3
for details).
Standard Luminaire lengths - All standard
luminaires are supplied in nominal lengths to
ensure full, even, illumination. Runs are available
in nominal 1’ increments starting at the nominal
8’ fixture length.
** Individual luminaires are not joinable in the
field.
M36 Joiner(s) - Runs are supplied in multiple
housings that are joined together in the field
using the supplied M36 Joiner System. This allows ease of installation and ensures a uniform
appearance (see page 5 for detail).
Electrical/Performance:
LED Light Engine - Brand-name mid-power
LEDs create a high efficiency LED light engine
able to provide a lumen maintenance of 96%
at 26,000 hours and 93% at 60,000 hours per
TM-21 report.
LED Life - Calculated L70 greater than 398,000
hours and Reported L70 greater than 60,000
hours @ 25°C per TM-21.
Delivered Lumens - Due to LED manufacturer’s
tolerances, the listed output has a ±5% tolerance. For outputs based on different CCT, please
see photometry section at the end.
CCT - Available in 3000K and 3500K, tolerance
within a 3-step MacAdam ellipse.
CRI - Min. 80
All Drivers - High efficiency, constant current,
soft start, Electronic Class 2 with a PFC>0.90.
For more detailed information on the available
drivers please see page 4.
Thermal Performance:
Powder Coat - All Selux luminaries are finished
in high quality polyester powder coating in our
Tiger Drylac certified facility and are tested in
accordance with test specifications for coatings
from ASTM and PCI.
All products undergo a five stage intensive pretreatment process where product is thoroughly
cleaned, phosphated, and sealed. Selux powder
coated products provide excellent salt and
humidity resistance as well as ultraviolet
resistance for color retention.
Standard interior Quickship color is White (WH).
Warranty:
5 Year Limited LED Luminaire Warranty Selux offers a 5 Year Limited Warranty to the
original purchaser that the M60 series LED luminaire shall be free from defects in material and
workmanship for up to five (5) years from date
of shipment. This limited warranty covers the
LED driver and LED light engine when installed
according to Selux instructions and operated
within the Ambient Temperature. For additional
details and exclusions, see “Selux Terms and
Condition of Sale.”
Ambient Operating Temperature - Luminaires
suitable for Max. ambient temperature of 35° C
(95° F) for all drivers.
Certifications and Compliance:
Min. ambient temperature of:
-20°C (-4°F) for DIM, DM and DML drivers.
0°C (32°F) for DC3 and DCE drivers.
NRTL - For Dry location
(I.E. cULus; cCSAus)
ADA Compliant
ARRA Compliant
RoHS Compliant
Luminaire Finish:
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 2 of 5
(Rev. 06/2016)
QL36_Direct_ss_v1.31
M36
LED Direct Quickship
Surface Mounting (F) - 2’ to 8’
2’
Surface Mount (F) - Dimensions
Nominal
Length
02 (2 ft.)
“A”
Housing Length
* “B” (Ref.)
End Suspensions
“C”
Mid. Suspension
“C1”
Mid. Suspension
Feet/Inch
MM
Feet/Inch
MM
Feet/Inch
MM
1' - 1/4"
616
0' - 1 5/8"
41
1' - 9"
534
Feet/Inch
MM
N/A
“D”
Feed Location
Feet/Inch
MM
0' - 4 1/8"
105
0' - 2 1/8"
54
04 (4 ft.)
4' - 1/4"
1225
0' - 6 1/8"
156
3'
894
06 (6 ft.)
5' - 10 5/8"
1794
0' - 6 1/8"
156
3'
914
1' - 10 3/8"
569
0' - 2 1/8"
54
08 (8 ft.)
8' - 1/4"
2444
0' - 6 1/8"
156
3'
914
4'
1219
0' - 2 1/8"
54
N/A
Surface Mount (F)*
(with Flex Whip)
*Please note:
Fixture does not cover a J-Box.
1. 6’ Flex Whip
2. Ø 5/16” Mounting hole drilled at the factory(mounting hardware to code by others).
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 3 of 5
(Rev. 06/2016)
QL36_Direct_ss_v1.31
M36
LED Direct Quickship
Drivers:
0-10V linear dimming (DIM)
Luminaires supplied with drivers offering the capability of either normal
switched operation or 0-10V dimming for linear dimming curve. Fixtures
ship wired for dimming. For on/off functionality, simply cap the dimming
leads. Minimum dimming level preset at factory to 1%. Maximum inrush
current per driver is 30mA2s & 0-10V control current is maximum 2mA per
driver.
eldoLED SOLOdrive 0-10V linear dimming (DM)
Luminaires supplied with SOLOdrive 0-10V dimming driver for linear dimming curve. Minimum dimming level preset at factory to 1%. Maximum
inrush current per drive is 30mA2s & 0-10V control current is maximum
2mA per driver.
LUTRON 3-wire dimming (DC3)
Luminaires supplied with A-series 3-wire dimming driver programmed for
Constant Current Reduction (CCR). Minimum dimming level down to 1%.
Inrush current per driver <2A.
LUTRON Ecosystem dimming (DCE)
Luminaires supplied with A-series EcoSystem (4 wire, digital link) dimming
driver programmed for Constant Current Reduction (CCR). Minimum
dimming level down to 1%. Inrush current per driver <2A.
* For control recommendations and system layout for Lutron drivers,
please contact Lutron.
eldoLED SOLOdrive 0-10V logarithmic dimming (DML)
Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%.
Maximum inrush current per drive is 30mA2s & 0-10V control current is
maximum 2mA per driver.
* For control recommendations for eldoLED drivers, please consult
eldoLED.
Driver Quantity
2 ft.
4 ft.
6 ft.
8 ft.
RUN
DIM, DM and DML
1
1
1
2
Approximately 1 driver
per 4 ft.
DC3, & DCE drivers
1
1
2
2
Consult Factory
Wiring Diagrams
0-10V linear (DIM)
0-10V linear eldoLED SOLOdrive (DM)
0-10V logarithmic eldoLED SOLOdrive (DML)
standard
DIM, DM & DML
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 4 of 5
(Rev. 06/2016)
QL36_Direct_ss_v1.31
M36
LED Direct Quickship
Joiner System - standard for Runs
Fixture extrusion
Recommended
#2 Phillips drive
Joiner extrusion
Fixture
extrusion
Additional view
Photometry
LW Optics / 36W LED / 3500K CCT
958
Link to photometry (IES & PDF files)
719
479
240
Catalog #: L36-1A35-35-LW-04-120
Report #: 749933
Delivered Lumens: 2628
Input Watts: 35.4W
Efficacy: 74
Power Factor: 0.990
Total Harmonic Distortion: 4.84
CCT: 3030K
CRI: 82.1
Max Candela: 958 @ 2.5° from Vertical
Spacing Criterion (0-180): 1.24
Spacing Criterion (90-270): 1.24
Spacing Criterion (Diagonal): 1.36
DIFFUSER
LOUVER
2
1
Maximum Candela = 958.3 Located At Horizontal Angle = 90, Vertical Angle = 2.5
# 1 - Vertical Plane Through Horizontal Angles (90 - 270)
# 2 - Vertical Plane Through Horizontal Angles (0 - 180)
CCT Multiplier
3500K
1.00
3000K
1.02
CCT and CRI multipliers apply to the photometry listed in the IES files, and per foot
values listed on page one (light engine).
Selux Corporation © 2014, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not
alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Page 5 of 5
(Rev. 06/2016)
QL36_Direct_ss_v1.31
L
l