Inst Maint & Wiring_5.qxd
20/11/2015
11:37 AM
Page 6
WIRING DIAGRAMS - STANDARD MOTORS
AD/E..D/V
Alpha/Beta Series
Diags. DD 4, 5, 6, 7
D-4/6
AD/E..S
Alpha Series Supply
Diags. DD 4, 5, 6, 7
D-13/15
*AL..
Centrifugal fans
Diags. DD 1, 2, 3
E-10/15
*AP/APV..
Axial Flow fans
B-50/53
Diags. DD 1, 2, 3, 6, 7, 9
*APB..
Belt-driven axial fans
B-50/53
Diags. DD 1, 2, 3, 6, 7, 9
BFA..
Bifurcated fans
B-50/53
Diags. DD 1, 2, 3, 6, 7, 9
CGD/E..
GE Series
D-58/59
Diags. DD 1, 2, 3, 8, 9
*CHD/E..
Heritage Series
D-48/49
Diags. DD 1, 2, 3, 8, 9
*CHS..
Heritage Smoke-Spill
Diags. DD 1, 2, 3
CPD/E..
Compact 2000
A-16/18
Diags. DD 1, 4, 5, 6, 7
*FL..DD
FlexLine Series
Diags. DD 1, 2, 3
FP..
Compact F/Proof Series A-26/27
Diag. DD 8
JV..
JetVent Axial
Diags. DD 1, 2, 3
E-3/6
L1 L2 L3
PowerLine Series
B-34/36
Diags. DD 1, 2, 3, 7, 9
E
E
U2
V2
V1
Red
U1
Leads
V1
W1
Black
U2
Leads
V2
W2
Red
U1
Leads
V1
W1
Black
U2
Leads
V2
W2
W1
Low speed
L1 L2 L3
E
For star ( ) wired motors
L1 L2 L3
E
W2
U2
V2
U1
V1
W1
Suggested wiring arrangement
L1 L2 L3
N
Diagram DD2
TWO-SPEED MOTORS
with 2 separate windings (dual winding)
High speed
L1 L2 L3
E
Red
U1
Leads
V1
W1
Black
U2
Leads
V2
W2
LO SPEED
CONTACTOR
OVERLOAD
STAR POINT
CONTACTOR
HI SPEED
CONTACTOR
OVERLOAD
BLACK
F-4/5
*PCD/E..
M
3~
Low speed
L1 L2 L3
BLACK
BLACK
E
OFF
LO
New Generation Series D-16/19
Diags. DD 1, 2, 3, 9
D-7/9
Red
U1
Leads
V1
W1
Black
U2
Leads
V2
W2
Suggested wiring arrangement
*RDS..
New Generation Series D-16/19
Diags. DD 1, 2, 3, 9
RSS..
New Generation Series D-16/19
Diags. DD 1, 2, 3, 9
*RVE..
New Generation Series D-16/19
Diags. DD 1, 2, 3, 9
*RVLE..
Alpha/Beta Industrial
Diags. DD 1, 2, 3, 9
SCD/E...
Short Cased Series
Diags. DD 4, 5, 6, 7
B-26/27
LO SPEED
CONTACTOR
OVERLOAD
*SQ..
SQ Series
Diags. DD 1, 2, 3, 9
A-23/25
RED
Alpha/Beta Industrial
Diags. DD 1, 2, 3, 9
L1 L2 L3
For delta ( ) wired motors
D-60/62
Multiflow Series
B-42/46
Diags. DD 1, 2, 3, 5, 6, 9
*RDLE..
N
D-50/51
*MMD/E..
*RDE..
in Dahlander connection (tapped winding)
High speed
RED
High Capacity Series
Diags. DD 1, 2, 3
TWO-SPEED MOTORS
refer to the name plate data for correct
connection
U1
Belt-driven axial fans
B-50/53
Diags. DD 1, 2, 3, 6, 7, 9
*HC..
SINGLE SPEED MOTORS
W2
*APS..
3Ø WIRING DIAGRAMS
Diagram DD3
RED
Pgs
3Ø WIRING DIAGRAMS
Diagram DD1
RED
These diagrams apply to STANDARD
FRAME INDUCTION MOTORS which
are used in the following products:-
SS..
Smoke-Spill Series
Diags. DD 1, 2, 3
D-60/62
L1 L2 L3
9
N
HI
SELECTOR SWITCH
Diagram DD4
Single speed only
Codes: ..31. and ..35.
L1 L2 L3
N
E
U1 - Red
V1 - Yellow
W1 - Blue/Black
M
3~
Thermal
Contacts (TB)
White, if fitted
HI SPEED
CONTACTOR
OVERLOAD
RED
RED
D-7/9
BLACK
M
3~
BLACK
BLACK
OFF
LO
HI
SELECTOR SWITCH
*NOTE: Refer to the motor manufacturer’s
data on the motor for wiring diagrams on
standard frame Ex e, Ex d etc. motors.
These diagrams are current at the time of publication, check the wiring diagram supplied with the motor.
N-6
INSTALLATION, WIRING DIAGRAMS & FAN TROUBLE SHOOTING
© FANTECH 2016
Inst Maint & Wiring_5.qxd
20/11/2015
11:37 AM
Page 7
WIRING DIAGRAMS - STANDARD MOTORS
3Ø WIRING DIAGRAMS
Diagram DD5
TWO-SPEED MOTORS
High speed delta ( ) connection
Codes: ..40. to 63.
L1 L2 L3
1Ø WIRING DIAGRAMS
(Form A)
Diagram DD6
Airflow *
V1 or Yellow
V2 or Orange
L
N
E
Anti-Clockwise
M
1~
Airflow
E W2 or White
U1 or Red
U2 or Black
1Ø WIRING DIAGRAMS
Diagram DD8
M
3~
L
N
E
Thermal
contacts (TB)
white
M
1~
Z1
Cap.
W1 or Blue
L1
Thermal
Contacts (TB)
White
L2
S/C
U2
Z2
N
U1
Diagram DD9
Low speed star ( ) connection
L
Codes: ..40. and upwards
L1 L2 L3
E
Z1 - Blue (AUX)
U2 - Black (MAIN)
W2 or White
U2 or Black
V2 or Orange
U1 or Red
V1 or Yellow
Z2 - Yellow
U1 - Red
N
E
}(COM)
L1
S/C
M
3~
W1 or Blue
Thermal
Contacts (TB)
White
Bridge L1 and L2 if speed
controller (S/C) is not required
Note:
This diagram suits speed controllers, VA2.0
and VA2.8 only. When using the AVA5.0,
VA5.0 and VA8.0 speed controllers,
use the AUX, MAIN and COM connections.
L2
N
White
Brown
Blue
M
1~
Bridge L1 and L2 if speed
controller (S/C) is not required
* Airflow direction base on left-hand blade installation.
For all other SINGLE-PHASE wiring
diagrams refer to the manufacturers
data on the motor.
(Form B)
Diagram DD7
Airflow
*
Clockwise
Airflow
L
N
E
Thermal
contacts (TB)
white
Z2
Cap.
M
1~
L1
S/C
L2
N
Z2 - Yellow (AUX)
U2 - Black (MAIN)
U2
Z1
U1
}
Z1 - Blue (COM)
U1 - Red
Bridge L1 and L2 if speed
controller (S/C) is not required
Note:
This diagram suits speed controllers, VA2.0
and VA2.8 only. When using the AVA5.0,
VA5.0 and VA8.0 speed controllers,
use the AUX, MAIN and COM connections.
N
* Airflow direction base on left-hand blade installation.
These diagrams are current at the time of publication, check the wiring diagram supplied with the motor.
© FANTECH 2016
INSTALLATION, WIRING DIAGRAMS & FAN TROUBLE SHOOTING
N-7
Inst Maint & Wiring_5.qxd
20/11/2015
11:37 AM
Page 8
WIRING DIAGRAMS - EXTERNAL ROTOR MOTORS
D-22/25
CD/E..VGL GL Gamma Series
Diags. ER 1, 2, 4, 5
D-38/40
CD/E..S
CF..
L1 L2 L3
Grey
E
W2
Brown
U1
U2
Blue
V1
V2
3 active wires plus
auto-reset
thermal contacts
L
N
B-3
Low speed
L1 L2 L3
A
Brown
W1
Orange
A-4/5
FSU146
Diag. ER 11
A-32
GRE..
Sigma Series
Diag. ER 4
E-2
HB..
Header Box
Diag. ER 4
A-33
HCM...
HCM Series
Diag. ER 4
A-10/11
HV..
Stylvent Series
Diags. ER 6, 8
A-12/13
HXM..
HXM Series
Diag. ER 6
MT..
Minitube Series
Diags. ER 4, 6
MV..E
Minivent Exhaust Series
Diags. ER 4, 6
Brown
U1
M
1~
Black
U2
Grey
Blue
V1
V2
Codes: CE19.. to CE28..
+ other fans as shown
W1
N
E
Orange
L2
N
Black
Brown
White
E
W2
Black
A-15
M
1~
Blue
TWO-SPEED MOTORS
L1 L2 L3
CE31 only
Diagram ER5
S/C
Green
U1
U2
Blue
V1
Black
4 active wires plus manual-reset
thermal contacts
L1
Yellow
Cap
Black
Diagram ER2
High speed
N
M
1~
L
Thermal
Contacts (TB)
White
V2
Bridge L1 and L2 if speed
controller (S/C) is not required
Brown
W1
Codes: CE35.. and over + other fans as shown
B-24/25
Diagram ER6
D-2/3
Low speed
L1 L2 L3
Yellow
W2
PC..ER
PowerLine Series
Diags. ER 1, 2, 3, 4, 5
U1
RP..
Ring Plate Series
Diag. ER 4
A-8/9
VM..
VentMajor Series
Diag. ER 6
B-4/5
SILDES
Silent Design Series
Diag. ER 6
A-2/3
Black
B-34/36
A-30/31
Green
White
E
Minivent Supply Series D-13/15
Diags. ER 4, 6
Ezifit Thru Wall
Diag. ER 4
Red
E
W2
EDM Series
Diags. ER 6, 7
U2
Blue
V1
V2
Brown
Codes: EDM..S & ..C; HV-150AE;
MT132; MV112 & MV132
SILDES
L
N
E
W1
M
1~
Diagram ER7
1Ø WIRING DIAGRAM
Diagram ER3
L
N
Codes: EDM..CT & ..CR
L
N
E
9
E
L1
S/C
L2
N
M
1~
White
Brown
Blue
Bridge L1 and L2 if speed
controller (S/C) is not required
M
1~
Diagram ER8
Codes: HV-230AE & HV-300AE
Exhaust air mode. For supply air mode
bridge LA & LC do not bridge LA & LB.
L
N
Single phase
AC motor
with capacitor
E
Black
Blue
EDM..
EWE
Red
Gamma Supply Series D-32/33
Diags. ER 1, 2, 4, 5
Compact axial fans
Single-phase motors
Diag. ER 6
MV..S
High speed
Orange
Brown
Gamma Series
Diags. ER 1, 2, 4, 5
TWO-SPEED MOTORS
Blue or Grey
CD/E..D/V
1Ø WIRING DIAGRAMS
Diagram ER4
3Ø WIRING DIAGRAMS
Diagram ER1
Green/Yellow
These diagrams mainly apply to
EXTERNAL ROTOR MOTORS but
some standard frame induction motor
diagrams have been included for ease
of presentation.
Pgs
N
E
LC
LB
LA
N
These diagrams are current at the time of publication, check the wiring diagram supplied with the motor.
N-8
INSTALLATION, WIRING DIAGRAMS & FAN TROUBLE SHOOTING
© FANTECH 2016
Inst Maint & Wiring_5.qxd
20/11/2015
11:37 AM
Page 9
WIRING DIAGRAMS - EXTERNAL ROTOR MOTORS
These diagrams apply to EXTERNAL
ROTOR MOTORS that are fitted to the
following products:Pgs
EIE..
Ezifit In-Wall
Diag. ER 10
A-28/29
JISU..
JetVent Centrifugal
Diag. ER 9
F-8/9
JIU..
JetVent Multiflow
Diag. ER 9
F-6/7
JVW..
JetVent Warehouse
Diag. ER 9
G-4
N
These diagrams are current at the time of publication, check the wiring diagram supplied with the motor.
© FANTECH 2016
INSTALLATION, WIRING DIAGRAMS & FAN TROUBLE SHOOTING
N-9