Fire-Rated Poke-Throughs
Index
Product
Flush Series
ScrubShield 4 x 4 Series
ScrubShield 2 x 2 Series
ScrubShield Duplex Receptacle Series
Furniture Feed Series
3-Service Furniture Feed
Single Service Furniture Feed
Low Voltage Large Capacity Furniture Feed
Pedestal Series
Two, Four and Six Gang Painted Aluminum Series
Two-Gang Satin Anodized Aluminum Series
Page Number
M-2–12
M-2–5
M-6–8
M-9–12
M-13–19
M-13–15
M-16–17
M-18–19
M-20–30
M-20–26
M-27–30
Fire-Rated Poke-Throughs
Section M
Index
?????
Dimensions in Inches (mm)
www.hubbell-wiring.com
Fire-Rated Poke-Throughs
ScrubShield 4 x 4 Flush Series
Fire-Rated Poke-Throughs
ScrubShield 4 x 4 Flush
Fire-Rated Poke-Through Fitting
Hubbell 4 x 4 fire-rated poke-throughs provide
maximum power and communication capacity for
flush, multi-service applications. These pokethroughs incorporate four 20A, 125V receptacles
and four openings for voice and data connectors.
The receptacles feature single or two circuit wiring
as well as isolated ground capability. They are
available in one piece, pre-wired versions that
include 4 Keystone openings that will accept
Hubbell catagory 6, 5e and USOC 6-position jacks
as well as a variety of communication connectors
and alternate manufacturers’ jacks. In addition, they
are offered in component pieces that will accept
Panduit and Avaya (Lucent) jacks.
Features
Four 20A, 125V receptacles.
Four openings for voice/data connections.
Available with painted aluminum or brass flanges.
M-2
The Hubbell 4 x 4 poke-throughs are available with
a painted aluminum flange and matching nonmetallic cover in gray, ivory, and black versions and
a solid brass flange with a black or brass finish nonmetallic cover. All Hubbell 4 x 4 poke-throughs
feature ScrubShieldTM technology. This technology
incorporates a comprehensive gasketing system
that prevents the ingress of cleaning fluids used in
carpet cleaners. ScrubShield technology allows
Hubbell 4 x 4 poke-throughs to surpass the UL514A
requirements for scrub water protection. The
through-floor fitting installs into a 4” core hole and is
UL listed for floors with 1 to 4 hour fire ratings.
Benefits
Maximum capacity for power applications.
Isolated ground and multi-circuit wiring capability.
Accept Hubbell category 6, 5e and USOC 6 position jacks as
well as a variety of communication connections and alternate
manufacturers’ jacks.
Matches office decor.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
ScrubShield 4 x 4 Flush
Complies with UL514A
One-Piece Units
Description
Color
Catalog Numbers
Complete, factory assembled unit including
Gray
PT4X4GY
a through-floor fitting, four pre-wired 20A, 125V
Ivory
PT4X4I
receptacles, four Keystone openings to
Black
PT4X4BL
accomodate Hubbell jacks and a variety of data
communication inserts*, gasketed covers and
painted aluminum flange (order data and
communication inserts separately).
Same as above except solid brass flange
Black
PT4X4BRS3
and gasketed non-metallic cover.
Brass Finish PT4X4BRS
Notes:
Power receptacles include isolated ground and two-circuit wiring capability.
* See page M-4 for Hubbell jacks and communication inserts.
Consult factory for alternate manufacturers’ data and communication
inserts that can be used with the Hubbell 4 x 4 fire-rated poke-throughs.
Replacement covers (below) are also available to accomodate alternative
manufacturers’ jacks.
Two-Piece Units - Service Fittings include four 20A, 125V
receptacles, four Keystone openings for Hubbell jacks*,
gasketed covers and flange.
Description
Color
Catalog Numbers
Non-metallic service fitting cover with gasketed
covers and painted aluminum flange.
Gray
Ivory
Black
PT4X4SFGY
PT4X4SFI
PT4X4SFBL
PT4X4BRS3
Same as above except solid brass flange and
Black
PT4X4SFBRS3
gasketed non-metallic cover.
Brass Finish PT4X4SFBRS
Notes:
Power receptacles include isolated ground and two-circuit wiring capability.
* See page M-4 for Hubbell jacks and communication inserts.
Consult factory for alternate manufacturers’ data and communication inserts
that can be used with the Hubbell 4 x 4 fire-rated poke-throughs.
Replacement covers (below) are also available to accomodate alternative
manufacturers’ jacks.
PT4X4SFGY
Through-Floor Fittings
Description
Through-floor fitting, less receptacle, cover and flange.
Catalog Number
PT4X4FIT
Two-Piece Service Fitting - For use in replacement applications
or when using an alternate manufacturer’s jacks. Flange
assemblies include flange and four 20A, 125V receptacles
(order cover separately). Covers are available for Hubbell
(Keystone opening), Avaya (Lucent) and Panduit jacks.
Color
Catalog Numbers
Flange assembly, cast aluminum, includes
four 20A, 125V receptacles.
Gray
Black
PT4X4SFGYNC
PT4X4SFBLNC
PT4X4FIT
ScrubShield 4 x 4 Flush Series
Description
PT4X4SFBRS3
Flange assembly, brass, includes
Brass
PT4X4SFBRSNC
four 20A, 125V receptacles.
Notes:
Power receptacles include isolated ground and two-circuit wiring capability.
* See page M-4 for Hubbell jacks and communication inserts.
Replacement Covers for 4 X 4 Series
Description
Color
Catalog Numbers
Non-metallic replacement cover with 4 Keystone
openings to accommodate Hubbell jacks and a
variety of data and communication inserts.
Gray
Ivory
Black
Brass Finish
PT4X4CGY
PT4X4CI
PT4X4CBL
PT4X4CBRS
Non-metallic replacement cover with 4 openings
for Avaya (Lucent) jacks.
Gray
Black
Brass Finish
PT4X4CLUGY
PT4X4CLUBL
PT4X4CLUBRS
Non-metallic replacement cover with 4 openings
for Panduit jacks.
Gray
Black
Brass Finish
PT4X4CPAGY
PT4X4CPABL
PT4X4CPABRS
Dimensions in Inches (mm)
www.hubbell-wiring.com
PT4X4CI
M-3
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Communication Products
4” Flush Abandonment Plates
Complies with UL514A
Hubbell Communication Products for 4 X 4 Series Poke-Throughs
HBL5EBK
Description
Color
Catalog Numbers
Category 6 jack.
Black
HBL6BK
Category 5e jack.
Black
HBL5EBK
USOC 6-Position jack.
Black
HBLUBK
RCA 110 punch down connector, red insulator.
Black
SIRCAOW
S-video 110 punch down connector.
Black
SISVOW
Note:
See Section P for other available colors and technical information.
Communication Products and 4” Abandonment Products
SISVOW
SIRCAOW
Abandonment Products
Abandonment plates can be used in conjunction with existing 4”
through-floor fitting to maintain the fire-rating of the floor.
Abandonment Plates- Textured Aluminum
Description
Color
Catalog Numbers
Used when a 4 X 4 service fitting is
removed and the 4” through-floor
fitting remains in the floor.
Gray
Black
PT4APGY
PT4APBL
PT4APGY
PT4APBL
M-4
www.hubbell-wiring.com
Dimensions in Inches (mm)
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
ScrubShield 4 x 4 Flush
Fire-Rated Poke-Through
Complies with UL514A
Hubbell offers a multiple service fire-rated poke-through fitting that
combines four insulated 20 ampere, 125V receptacles with four
Keystone openings to be installed in a 4” cored hole. This additional
service capacity provides the maximum in flexibility if requirements
change. Four power receptacles with two-circuit wiring capability and
Keystone openings for up to four multi-media connectors mount flush to
the cover for an unobtrusive appearance. Covers and flanges are
available in gray, black, brass and ivory colors. These units are UL
listed for floors with a 1-4 hour fire rating.
Product Information
Applications Data
• Four insulated 20A, 125V receptacles.
• Mounted in core drilled
4” (101.6mm) diameter hole
• Four Keystone openings.
through the concrete
• All brass flange available.
floor.
• Receptacle housing mounts to fitting.
• Floor thickness range:
• 2 low voltage conduit entrances.
21 /4” to 7” (57.2mm to
• Stationary fire barrier expands during fire conditions
177.8mm).
to provide an upper fire seal.
• UL Listed for fire
• Adjustable fire barrier accommodates floor thickness resistance in 1-4 hour
1
from 2 /4” to 7” (57.2mm to 177.8mm)–seals bottom
rated floors.
or the core drill hole.
Specifications
Dimensions
For use in 1, 11 /2, 2, 3, or 4 hour rated
unprotected reinforced concrete floors or
in 1, 2, or 3 hour rated floors employing
steel floor units and concrete topping
(D900 series design).
Floor Thickness Range
21 /4” (over metal deck) to 7” (57.2 to
177.8).
UL Installation Spacing
Minimum of 2 feet on centers and not
more than one unit per each 65 sq. ft. of
floor area in each span.
Cored Hole
4” (101.6) diameter.
Receptacle
NEMA 5-20R; 20A, 125V.
Jack(s)
Accepts Hubbell Category 6 and 5e jacks as
well as a variety of multimedia connectors.
See page M-4 for catalog numbers.
Power Conductors
#14 AWG THHN stranded copper.
ScrubShield 4 X 4 Flush Series
Fire Rating
PT4X4BRS3
Materials
Device Cover and Flaps
Thermoplastic
Carpet Flanges
Solid brass; brushed and laquered
Painted Cast Aluminum
Conduit Tubes
Power - 3 /4” EMT/Low Voltage - 3/4” EMT (two)
UL Characteristics
Listing
UL File Number
Outlet Box
E31999
Fire Resistance
R8429
1 /2, 2, 3, or 4 hour rated unprotected reinforced concrete floors, OR
For
use
in
1,
1
ƒ
ƒ in 1, 2 or 3 hour rated floors employing steel floor units and concrete topping (D900 Series designs).
UL Spacing Restrictions – Minimum of 2 ft. O.C. and not more than one unit per each 65 sq. feet of floor area in each span.
Dimensions in Inches (mm)
www.hubbell-wiring.com
M-5
Fire-Rated Poke-Throughs
ScrubShield 2 X 2 Flush Series
Fire-Rated Poke-Through
ScrubShield 2 X 2 Flush
Fire-Rated Poke-Through Fitting
Hubbell 2 X 2 fire-rated poke-throughs include a
Hubbell Style Line 20A, 125V duplex receptacle
and two Hubbell category 5e jacks. Isolated ground
versions are also available. Hubbell 2 X 2 pokethroughs are offered with a painted aluminum
flange and matching non-metallic cover in gray and
black versions and a solid brass flange with a black
or brass finish non-metallic cover. Hubbell 2 X 2
poke-throughs feature ScrubShield technology.
This technology incorporates a comprehensive
gasketing system that prevents the ingress of
cleaning fluids used in carpet cleaners into the
device. ScrubShield technology allows Hubbell 2 X
2 poke-throughs to exceed the UL514A
requirements for scrub water protection. The
through-floor fitting installs into a 3” cored hole and
is UL listed for floors with 1 to 4 hour fire ratings.
Features
20A, 125V Style Line receptacle.
Benefits
High abuse receptacle provides superior performance
and reliability in high abuse environments.
Suitable for high speed data applications.
Matches office decor.
Two Hubbell category 5e jacks included.
Available with painted aluminum or brass flanges.
M-6
www.hubbell-wiring.com
Dimensions in Inches (mm)
Fire-Rated Poke-Throughs
Fire-Rated Poke-Through
ScrubShield 2 X 2 Flush
Complies with UL514A
One-Piece Units
Style Line Duplex - Painted Aluminum Flange
Description
Complete factory assembled unit including
a through-floor fitting, a Hubbell HBL2162BK
receptacle, two Hubbell HBL5EBK jacks, a
non-metallic gasketed cover, and a painted
aluminum flange.
Color
Gray
Black
Catalog Numbers
PT2X2GY
PT2X2BL
Style Line Duplex - Brass Flange
Description
Color
Catalog Numbers
Complete factory assembled unit including
Black
PT2X2BRS3
a through-floor fitting, a Hubbell HBL2162BK
Brass Finish PT2X2BRS
receptacle, two Hubbell HBL5EBK jacks, a
non-metallic gasketed cover, and a solid brass flange.
Isolated Ground Duplex - Painted Aluminum Flange
Description
Complete factory assembled unit including
a through-floor fitting, a Hubbell IG2162
receptacle, two Hubbell HBL5EBK jacks, a
non-metallic gasketed cover, and a painted
aluminum flange.
Color
Gray
Black
PT2X2GY
Catalog Numbers
PT2X2IGGY
PT2X2IGBL
Isolated Ground Duplex - Brass Flange
Description
Color
Catalog Numbers
Complete factory assembled unit including
Black
PT2X2IGBRS3
a through-floor fitting, a Hubbell IG2162
Brass Finish PT2X2IGBRS
receptacle, two Hubbell HBL5EBK jacks, a
non-metallic gasketed cover, and a solid brass flange.
PT2X2SFBL
Two-Piece Units
Service Fittings - Painted Aluminum Flange
Description
Service fitting including non-metallic, gasketed
cover, two Hubbell HBL5EBK jacks,
and a painted aluminum flange.
Color
Gray
Black
Catalog Numbers
PT2X2SFGY
PT2X2SFBL
ScrubShield 2 X 2 Flush Series
Service Fittings - Brass Flange
Description
Service fitting including a black non-metallic,
gasketed cover, two Hubbell HBL5EBK jacks,
and a solid brass flange.
Color
Catalog Numbers
Black
PT2X2SFBRS3
Brass Finish PT2X2SFBRS
PT2X2FIT
Through-Floor Fitting
Description
Through-floor fitting, less cover and flange; includes
Hubbell HBL2162BK duplex receptacle.
Catalog Number
PT2X2FIT
Replacement Covers
Description
Non-metallic replacement cover.
Dimensions in Inches (mm)
Color
Gray
Black
Brass Finish
Catalog Numbers
PT2X2CGY
PT2X2CBL
PT2X2CBRS
www.hubbell-wiring.com
PT2X2CBL
M-7
Fire-Rated Poke-Throughs
Fire-Rated Poke-Through
ScrubShield 2 X 2 Flush
Complies with UL514A
Hubbell offers a multiple service fire-rated poke-through fitting which
incorporates two category 5e data jacks. This series of fittings
include a Hubbell Style Line® 20 ampere duplex receptacle and two
Hubbell category 5e modular jacks. The jacks mount flush to the
cover for an unobtrusive appearance. Covers and flanges are
available in gray, brass and black colors. Each fitting installs into a 3”
cored hole and may be easily removed from the floor and relocated.
These units are UL listed for floors with 1-4 hour fire rating.
Product Information
• Two Category 5e jacks.
• Jacks mount flush.
• 2 low voltage conduit entrances.
• Receptacle mounts to fitting.
• Fitting comes pre-wired with a Style Line
20A, 125V duplex receptacle.
• Stationary fire barrier expands during fire
conditions to provide an upper fire seal.
• Adjustable fire barrier accommodates floor
thickness from 21 /4” to 7” (57.2 to 177.8)
seals bottom of the core drilled hole.
• Integral junction box incorporates eight
3 /4” knockouts.
Applications Data
• Mounted in core drilled
3” (76.2) diameter hole
through the concrete floor
• Floor thickness range:
21 /4” to 7” (57.2 to 177.8).
• UL Listed for fire
resistance in 1-4 hour
rated floors.
Specifications
PT2X2BL
Dimensions
Fire Rating
Floor Thickness Range
UL Installation Spacing
Cored Hole
Receptacle
Jacks
Power Conductors
For use in 1, 11 /2, 2, 3, or 4 hour rated unprotected
reinforced concrete floors or in 1, 2, or 3 hour rated floors
employing steel floor units and concrete topping
(D900 Series design).
21 /4” (over metal deck) to 7” (57.2 to 177.8).
Minimum of 2 feet O.C. and not more than one unit per
each 65 sq. ft. of floor area in each span.
3” (76.2) diameter.
Hubbell #HBL2162BK black; NEMA 5-20R; 20A, 125V;
pre-wired.
Hubbell HBL5EBK black; category 5e;
UL Listed; 110 type contacts.
#12 AWG THHN stranded copper.
ScrubShield 2 X 2 Flush Series
Materials
Device Cover and
Flaps
Carpet Flanges
Thermoplastic
Painted Cast Aluminum/
Solid brass, brushed and laquered
3 /4” EMT
Power Conduit Tubes
Low Voltage Conduit Tubes 1 /2” EMT (two)
Junction Box
13.0 cubic inches; eight 3 /4” knockouts
UL Characteristics
Listing
UL File Number
Outlet Box
E31999
Fire Resistance
R8429
1 /2, 2, 3, or 4 hour rated unprotected reinforced concrete floors, OR
For
use
in
1,
1
ƒ
ƒ in 1, 2 or 3 hour rated floors employing steel floor units and concrete topping (D900
Series designs).
UL Spacing Restrictions – Minimum of 2 ft. O.C. and not more than one unit per each
65 sq. feet of floor area in each span.
M-8
www.hubbell-wiring.com
Dimensions in Inches (mm)
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
ScrubShieldTM Flush Duplex Series
Features
Internal spurs for securing into hole.
Removable securing spurs.
1 to 4 hour fire rating.
Available in several colors/finishes.
Available with solid brass cover/flange.
Available in standard and isolated ground versions.
Dimensions in Inches (mm)
and reuse of the poke-through fitting. This new
design saves time and labor by eliminating the
need to secure the fitting from below the floor. All
Hubbell flush fire-rated poke-through fittings now
incorporate this new installation feature.
Hubbell flush duplex series poke-throughs feature
ScrubShield technology. This gasketing system
allows Hubbell poke-throughs to exceed the
UL514A requirements for scrub water protection.
Benefits
Installs easily from above the floor.
Prevents fitting from pulling out of hole.
Easy removal of fitting from hole.
Allows for reuse of fitting.
Higher performance than competition.
Attractive finished appearance.
Durable and attractive.
Meets the needs of many types of service.
www.hubbell-wiring.com
M-9
ScrubShield Flush Duplex Series
Hubbell continues to offer significant installation
improvements to its line of fire-rated poke-through
fittings. This “step-down” feature allows Hubbell
flush poke-through fittings to be completely wired
with flexible conduit and installed from above the
floor. Two internal “spurs”, which are fastened onto
the fitting, secure it in a cored hole when the unit is
pushed down into the cored hole. These spurs may
also be removed, thereby providing easy removal
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
ScrubShield Flush Duplex Series
Complies with UL514A
One-Piece Units: Complete
with flush service fitting and a
through-floor fitting. These units
are all pre-wired.
One-Piece Units
Standard Duplex – Painted Aluminum
Description
Color
Canadian
Series*
Catalog
Catalog
Numbers
Numbers
PT7FSDBRA PT7FSDBRCA
PT7FSDBLA
—
PT7FSDGYA PT7FSDGYCA
PT7FSDIA
PT7FSDICA
With Hubbell HBL5352 series (20A)
Brown
specification grade receptacle & two
Black
low-voltage knockouts. Equipped with a
Gray
cast aluminum carpet flange and a
Ivory
thermoplastic (ABS) duplex flap cover.
*Canadian series is CSA Certified and equipped with HBL5252 (15A) duplex receptacle.
Standard Duplex – Brass
Description
All brass: Includes brass carpet flange and
matching brass duplex flap cover. Equipped with a
pre-wired Hubbell HBL5352 black receptacle and
two brass low-voltage knockouts.
Partial brass: Same as Hubbell PT7FSDBRS2 except
with a black thermoplastic (ABS) duplex flap cover.
Type
All Brass
Partial
Brass
Catalog
Numbers
PT7FSDBRS2A
PT7FSDBRS3A
Isolated Ground – Painted Aluminum
PT7FSDBRS2A
Description
Color
With Hubbell IG5362 (20A) isolated ground
Gray
receptacle & two low-voltage knockouts. Equipped
Ivory
with a cast aluminum carpet flange and a thermoplastic
(ABS) duplex flap cover.
Catalog
Numbers
PT7IGFSDGYA
PT7IGFSDIA
Isolated Ground – Brass
Two-Piece Units: Order flush
service fitting and through-floor
fitting separately.
Description
Type
Same as Hubbell PT7FSDBRS2 except pre-wired with All Brass
a Hubbell IG5362 series (20A) isolated ground receptacle.
Catalog
Number
PT7IGFSDBRSA
ScrubShield Flush Duplex Series
Two-Piece Units
Flush Service Fittings
Canadian
Series*
Catalog
Catalog
Description
Color
Numbers
Numbers
With pre-wired Hubbell HBL5352 series (20A) Brown
FRFBRA
—
specification grade receptacle & two
Black
FRFBLA
—
low-voltage knockouts. Equipped with a cast Gray
FRFGYA
FRFGYCNA*
aluminum carpet flange and a thermoplastic Ivory
FRFIA
FRFICNA*
(ABS) duplex flap cover.
All Brass FRFBRS2A
—
*Canadian series is CSA Certified and equipped with HBL5252 (15A) duplex receptacle.
Through-Floor Fittings
PT7FSD
FRFGYA
M-10
Description
Three-service poke-through fittings install in
a 3” (76.2) diameter core drilled hole and
will accommodate a floor thickness range of
21 /4” - 7” (57.2 - 177.8). Includes
a 3 /4” EMT tube for power wiring.
www.hubbell-wiring.com
Type
With junction box
Without junction box
Catalog
Numbers
PT7FSD
PT73SD
Dimensions in Inches (mm)
ScrubShield Flush Duplex Series
Complies with UL514A
Accessories
Flush Duplex
Step
1: Choose one-piece or two-piece units (Options A or B)
Replacement Duplex Flap Covers
Option A: One-Piece Units
Description
Replacement
for one-piece
Includes flushcover
preassembled
and
two-piece
service
fitting flush
and poke-throughs
featured
on the previous page.
through-floor
Insert
fitting.cover only, excludes carpet
flange and receptacle.
Color
Brown
Black
Gray
Ivory
Brass
¦
OptionNumbers
B: Two-Piece Units
Catalog
PFBRCBRA
Order flush
PFBRCBLA
service fitting and
PFBRCGYA
through-floor
PFBRCIA
fitting separately.
BRS2RCA
¦
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
PFBRCGYA
Step 2: Choose flush service fitting (duplex receptacle or furniture feed category)
Duplex Receptacle
1-20A duplex
receptacle
& 2 voice/data
openings.
¦
Furniture Feed
Duplex Receptacle
Furniture Feed
1-20A duplex
receptacle
& 2 voice/data
openings.
¦
¦
¦
Modular
Speed
Data Jacks
For Flush Fire-Rated
Step
3: Voice/Low
Select color/type
service
fitting required
Poke-Throughs
If
duplex receptacle, then choose standard or isolated ground*. If furniture feed, then choose single service or 3-service.
Install
in the low-voltage knockouts
on the flush duplex series Standard
poke- Duplex HBL5352
3-Service Furniture Feed
Standard Duplex HBL5352
throughs. Provide convenient plug-in
capability
forone
telephone
and
(1)
(with two
(2)1 /2 inch and
Color/Type
Catalog No.
Color/Type Catalog No.
3 /4 inch threaded plugs)
low-speed data applications.
Brown
PT7FSDBRA
Color/Type Catalog
No.
Description
Color
Black
PT7FSDBLA
Gray
PT73FFSDGY
Gray
PT7FSDGYA
TJ8 Modular Jack Accessory:
Black
Ivory
PT7FSDIA
Ivorypre-wired
PT73FFSDI
8All
position/8
wire
(AT&T, EIA 568B) with
Brass
PT7FSDBRS2A
15”
(381)
leads,
includes dust cover.
Partial
Brass
PT7FSDBRS3A
Canadian Series (15A HBL5252)
Specifications
Brown
PT7FSDBRCA
Single Service Furniture Feed
(with one (1) 1.11” KO for 3 /4 inch
conduit connector)
Brown
FRFBRA
Catalog
Black Number
FRFBLA
Gray
FRFGYA
TJ8
Ivory
All Brass
FRFAI
FRFBRS2A
FRFGYA + TJ8
3-Service Furniture Feed
Dimensions
(with two (2)1 /2 inch and one (1)
3 /4 inch threaded plugs)
.36"
(9.1)
Color/Type
Catalog No.
Gray
Ivory
FRF3GY
FRF3I
15.0"
(381.0)
Canadian Series (15A, HBL5252)
Material
Gray
PT7FSDGYCA
Gray
Ivory
PT7FSDICA
Catalog
Housing:
Engineered
flame-retardantColor/Type
thermoplastic
UL No.
rated 94V-0. Ivory
Isolated Ground (IG5362 Series)
FRFGYCNA
FRFICNA
Gray
PT7FFSDGY
Contacts: .02 diameter spring temperIvory
phosphor bronze.
PT7FFSDI
Gray
PT7IGFSDGYA
Ivory
PT7IGFSDIA
Contact
100 micro inches of nickel with a minimum of 50 micro inches of hard
All Brassplating:
PT7IGFSDBRSA
Single Service Furniture Feed
(with one (1) 1.11”KO for 3 /4 inch
conduit connector)
Color/Type
Catalog No.
Gray
FRF1GY
gold
part 68units,
subpart
F andprocess
Mil Std-G-45204,
minimum plating
density
of 17
1.16"
Note:
For two-piece
units, you must proceed
through step 5
Note:per
ForFCC
one-piece
ordering
is complete
(29.5)
grams(unless
per cubic
centimeter.
(through-floor fitting).
jack
accessory is required).
¦
¦
Step
5: For two-piece units only, select through-floor fitting
Voice circuits.
Low speed data (up to 1 MBIT/s).
Notes: See ordering information on next
Through-Floor Fitting
page for specific product descriptions.
Description
Catalog No.
All products featured above are installed in a
With junction box
PT7FSD
3 inch diameter core drilled hole.
Without
PT73SD
Specifications on page M-12.
junction box
* Isolated ground with duplex receptacle is
only offered as one-piece unit.
Dimensions in Inches (mm)
www.hubbell-wiring.com
¦
Pos.
1
White/Orange
Through-Floor
Fitting
2
Orange/White
3
White/Green Catalog No.
Description
4
Blue/White
For 3-service
5
White/Blue PT73SD
fittings only
6
Green/White
(FRF3GY
and FRF3I).
7 single
White/Brown
For
service
PT71SD
8
Brown/White
fittings
only
(FRF1GY).
M-11
ScrubShield Flush Duplex Series
¦
.95"
Wire type: 24 gauge color coded PVC insulation per U.L. type 1061.
(24.1)
Mechanical
Step
4: For duplex receptacle versions only, you may opt for a 6 or 8 position jack (if required)
Catalog No. TJ8
Contact mating pressure: 100 grams minimum per FCC part 68 subpart F.
Crimp tensile strength: 4 lbs. minimum.
Voice/lowplug
speedretention:
data jack 17 lbs. minimum.
Voice/low speed data jack
Modular
1 2 3 4 5 6 7 8
Customer
cycles:
Descriptionuse insertion
Catalog
No. 1000 minimum.
Description
Catalog No.
8 position/8 wire
TJ8
Electrical
8 position/8 wire
TJ8
(AT&T, EIA 568B)
(AT&T, EIA 568B)
Contact
resistance:
5
milliohms
maximum
per
EIA/TIA
standard
568
level
one.
with pre-wired 15”
with pre-wired 15”
AT&T/PDS, EIA 568B
Insulation
resistance: 500 megohms minimum.
(381) leads,
(381) leads,
8 Position/8 Wire
includes dust
cover. 1000V rms 60hz.
Dielectric
strength:
includes dust cover.
Wire Color Markings
Applications
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
ScrubShield Flush Duplex Series
Complies with UL514A
Duplex Receptacle
and Voice/Data
HubbellUnits
continues to offer significant installation improvements to its
One-Piece
line ofDuplex
flush fire-rated
poke-through
Standard
– Painted
Aluminum fittings. This “step down” feature
allows Hubbell flush poke-through fittings to be completely
wired with
Canadian
flexible conduit and installed from above the floor. Two
internal
“spurs”,
Series*
which are fastened onto the fitting, secureCatalog
it in a cored
hole when the
Catalog
Description
Color
Numbers
unit is pushed down into the cored
hole. These
spursNumbers
may also be
With Hubbell
HBL5352
seriesproviding
(20A)
PT7FSDBRCA
removed,
thereby
easyBrown
removalPT7FSDBRA
and reuse of
the pokespecification
grade
receptacle
two design saves
Black time
PT7FSDBLA
—
through
fitting.
This &new
and labor by eliminating
the
low-voltage knockouts. Equipped with a
Gray
PT7FSDGYA PT7FSDGYCA
need
to
secure
the
fitting
from
below
the
floor.
All
Hubbell
flush
firecast aluminum carpet flange and a
Ivory
PT7FSDIA
PT7FSDICA
rated poke-through
thermoplastic
(ABS) duplex flapfittings
cover. now incorporate this new installation
feature.
*Canadian
series is CSA Certified and equipped with HBL5252 (15A) duplex receptacle.
Product Information – Duplex Receptacle Series
Applications Data
• Mounted in core drilled
to protect receptacles when they are not in use. . . will
3” (76.2)Catalog
diameter hole
not stick open like sliding covers.
the concrete floor.
Description
Type through Numbers
• Flush
die-cast
aluminum
• Floor thickness
range:
All Brass:
Includes
brass
carpetcarpet
flangeflange
and and
All Brass
PT7FSDBRS2A
thermoplastic
liftflap
cover
or optEquipped
for all brass.
21 /4” to 7” (57.2 to 177.8).
matching
brass duplex
cover.
with a
pre-wired
HBL5352
receptacle
and power
” pre-wired
conduit black
contains
and isolates
• UL Listed for fire
• 3 /4Hubbell
two brass
low-voltage knockouts.
conductors.
resistance in 1-4 hour
Partial• Brass:
Same
as Hubbell
Partialrated floors.
PT7FSDBRS3A
Two low
voltage
openingsPT7FSDBRS2
for up to one 25except
pair
with a black
thermoplastic
duplex
cover.
Brass
telephone
cable per(ABS)
opening.
. . willflap
accept
low-profile
voice/data jack.
Isolated
Ground
– Painted
Aluminum
• Units
come standard
with a pre-wired
HBL5352 or
IG5362 series receptacle (15A, HBL5252 series for
Catalog
Canadian units).
Description
Color
Numbers
• Stationary
fire (20A)
barrierisolated
expandsground
during fire conditions Gray
With Hubbell
IG5362
PT7IGFSDGYA
to provide
an upper fireknockouts.
seal.
receptacle
& two low-voltage
Equipped
Ivory
PT7IGFSDIA
Adjustable
fire carpet
barrier flange
accommodates
floor thickness
with a•cast
aluminum
and a thermoplastic
from 21flap
/4” to
7” (57.2 to 177.8) - Seals bottom of the
(ABS) duplex
cover.
core drilled hole.
• Integral
junction–box
incorporates seven 3 /4” knockouts.
Isolated
Ground
Brass
Standard
Duplex – Brass
• Independent, spring-loaded lift covers are self-closing
PT7FSDBRS2A
Catalog
Dimensions
Description
Type
Numbers
Flush Series with Duplex Receptacle
Same as Hubbell PT7FSDBRS2 except pre-wired with All Brass
PT7IGFSDBRSA
a Hubbell
IG5362
series Unit
(20A) isolated ground
Complete
Topreceptacle.
View
Replacement Cover
.44"
(11.2)
Lift-cover
and matching
carpet flange
Two-Piece Units
Flush Service Fittings
Canadian
Series*
Catalog
Catalog
Description
Color
Numbers
Numbers
12.50"
With pre-wired
Hubbell HBL5352
series (20A) Brown
FRFBRA
—
(317.5)
3
" EMT
specification grade receptacle &4 two
Black
FRFBLA
7.00"
3.88"—
low-voltage knockouts. Equipped with a cast (177.8)
Gray
FRFGYA (98.6)
FRFGYCNA*
Dia.
aluminum carpet flange and a thermoplastic Dia.
Ivory
FRFIA
FRFICNA*
(ABS) duplex flap cover.
All Brass FRFBRS2A
—
*Canadian series is CSA Certified and equipped with HBL5252 (15A) duplex receptacle.
ScrubShield Flush Duplex Series
1
2"
Dia.
(12.7)
opening
when
broken
out
Through-Floor Fittings
UL Characteristics
Catalog
Listing
Description
Type UL File Number Numbers
Outlet Box
E31999box
Three-service
poke-through fittings install in With junction
PT7FSD
Fire Resistance
R8429
a 3” (76.2)
diameter core drilled hole and
Without
junction box
PT73SD
For use ina1,floor
11 /2,thickness
2, 3, or 4range
hour rated
will accommodate
of unprotected reinforced concrete floors, OR
ƒ
21 /4” - 7”in
1, 2 -or177.8).
3 hourIncludes
rated floors employing steel floor units and concrete topping (D900
ƒ (57.2
a 3 /4” EMT
tube
for power wiring.
Series
designs).
UL Spacing Restrictions – Minimum of 2 ft. O.C. and not more than one unit per each
65 sq. feet of floor area in each span.
M-12
www.hubbell-wiring.com
Dimensions in Inches (mm)
c
Flush Furniture Feed Series
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
3-Service Power and
Replacement Duplex Flap Covers
Voice/Data
Description
Color
Catalog Numbers
Hubbell offers a complete line of fire-rated pokeconduit connector for providing power or low voltage
Replacement cover for one-piece
Brown
PFBRCBRA
throughs for furniture feed applications. The 3-service
feeds
to furniture systems. For
large capacity
low
and two-piece flush
poke-throughs
Black
PFBRCBLA
flush series is designed to deliver power and voice/data
voltagepage.
applications, a version
is available
to feed either
featured on the previous
Gray
PFBRCGYA
IvoryAll versions
PFBRCIA
cabling to feed furniture systems. This series Insert cover only,1excludes
1/4” orcarpet
2” conduit connectors.
feature a
flangeand
and receptacle.
BRS2RCA
incorporates one 3/4” threaded opening for power
painted aluminum flush fittingBrass
that provides
a durable,
two 1/2” openings for voice/data. Single-service models
attractive appearance.
Poke-Throughs
are available with a 1.11” (28.3) knockout for aFire-Rated
3/4”
Fire-Rated Poke-Throughs
Flush painted aluminum service fitting.
Available in a variety of colors.
Single and three service models.
Dimensions in Inches (mm)
FlushBenefits
Series – Furniture Feed (3-Service)
Flush Furniture Feed Series
Features
Removable spurs secure fitting into hole.
Installs easily from above the floor.
Prevents fitting from pulling out of hole.
Easy removal of fitting from hole.
Durable and attractive.
Matches office decor.
Complete offering to meet various application requirements.
www.hubbell-wiring.com
M-13
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Flush Series – Furniture Feed (3-Service)
Complies with UL514A
One-Piece Units: Includes
flush service fitting and throughfloor fitting.
One-Piece Units
Description
Color
Catalog Numbers
Flush furniture feed service fitting
Gray
PT73FFSDGY
and through-floor fitting (three-service).
Ivory
PT73FFSDI
Includes two (2) 1 /2” and one (1) 3 /4”
conduit fittings.
Note: On one-piece units, conduit insert cover is not removable from above the floor.
PT73FFSDGY
3-Service Furniture Feed Series
Two-Piece Units: Order flush
service fitting and through-floor
fitting separately.
Two-Piece Units
Description
Color
Catalog Numbers
Furniture Feed Service Fitting:
Gray
FRF3GY
Flush service fitting used with Hubbell PT73SD.
Ivory
FRF3I
Includes two (2) 1 /2” and one (1) 3 /4”
Black
FRF3BK
conduit fittings.
Furniture Feed Through-Floor Fitting:
PT73SD
Three-service fitting used with Hubbell FRF3GY
FRF3BK and FRF3I. Includes throw-away installation plate.
Notes: On two-piece units, conduit insert cover is removable from above the floor.
Catalog numbers above are not CSA Certified.
PT73SD
FRF3GY
Accessories
3-Service Furniture Feed
Replacement Insert
FF3GY
M-14
Description
Color
Catalog Numbers
Use as a replacement cover for Hubbell
Gray
FF3GY
PT73FFSDGY and PT73FFSDI or to convert
Ivory
FF3I
installed Hubbell PT7FSDGY and PT7FSDI
into a furniture feed poke-through. Includes
(2) 1 /2” and (1) 3 /4” conduit fittings.
Notes: Not to be used as replacement cover for FRF3GY , FRF3BK and FRF3I
service fittings.
Catalog numbers above are not CSA Certified.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Flush Series – Furniture Feed (3-Service)
Complies with UL514A
Provides flush through the floor delivery of power and voice/data
cabling to feed furniture systems. These high capacity furniture feed
flush poke-throughs are offered as one-piece units (complete with
flush service fitting and through-floor fitting), or as two-piece units
(flush service fitting and through-floor fitting ordered separately).
Product Information – 3-Service Furniture Feed
Applications Data
• Flush Aluminum Service Fitting.
• Mounted in core drilled 3”
• Aluminum conduit insert cover with one (1) 3 /4” and two (76.2) diameter hole
through the concrete floor.
(2) 1 /2” die-cast threaded plugs.
•
Floor thickness range: 21 /4”
• Matching cast aluminum carpet flange.
to
7” (57.2 to 177.8).
• Furnished with one (1) 3 /4” and two (2)1 /2” screw-in
• UL Listed for fire
flexible metal conduit connectors.
resistance in 1-4 hour
• Finish: Epoxy paint (gray, black or ivory).
rated floors.
Note: The above product data pertains to both one-piece and two-piece units.
Dimensions
3-Service Furniture Feed
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
PT73FFSDGY
Top View
Side View
Two 12 "
threaded
plugs for
voice/data
One 34 "
threaded
plug for
power
8.50"
(215.9)
3.88"
(98.6)
3
4 " EMT
7.00"
(177.8)
UL Listed Wiring Capacity
3-Service Furniture Feed Series
3-Service (Power & Voice/Data):
Power: Up to six #12 AWG and two #10 AWG type THHN wires or up to ten #12 AWG
type THHN wires AND
Voice/Data: Up to fifty #22 AWG telephone/data conductors (one 25 pair telephone
cable) per each low-voltage opening.
Voice/Data Only:
Up to 200 #22 AWG telephone/data conductors (or four 25 pair telephone cables).
Rule of Thumb: Any combination of wire that does not exceed .11 sq. in. of total
allowable copper cross-sectional area is acceptable.
Note: When connecting conduit sweeps to through-floor fittings, ensure compliance
with NEC fill tables.
UL Characteristics
Listing
UL File Number
Outlet Box
E31999
Fire Resistance
R8429
For
use
in
1,
11/2,
2,
3,
or
4
hour
rated
unprotected
reinforced concrete floors, OR
ƒ
in
1,
2
or
3
hour
rated
floors
employing
steel
floor
units
and concrete topping (D900
ƒ
Series designs).
UL Spacing Restrictions – Minimum of 2 ft. O.C. and not more than one unit per
each 65 sq. feet of floor area in each span.
Dimensions in Inches (mm)
www.hubbell-wiring.com
M-15
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Flush Series – Furniture Feed (Single-Service)
Complies with UL514A
One-Piece Units: Includes
flush service fitting and throughfloor fitting.
One-Piece Units
Description
Color
Catalog Numbers
Flush furniture feed
Gray
PT7FFSDGY
service fitting and
Ivory
PT7FFSDI
through-floor fitting
(single-service).
Note: On one-piece units, conduit cover is removable from above the floor.
PT7FFSDGY
Single Service Furniture Feed Series
Two-Piece Units: Order flush
service fitting and through-floor
fitting separately.
Two-Piece Units
Description
Color
Catalog Numbers
Furniture Feed Service Fitting:
Gray
FRF1GY
Flush service fitting used with
Black
FRF1BK
Hubbell PT71SD (single-service).
Brass
FRF1BRS
Furniture Feed Through-Floor Fitting:
PT71SD
Single-service fitting used with FRF1BK, FRF1BRS
and FRF1GY. Includes throw-away installation plate.
Note: On two-piece units, conduit cover is removable from above the floor.
PT71SD
FRF1GY
Abandonment Products
Flush Series
Abandonment Products
To maintain the fire-rating of the floor, two types of products are
available: abandonment plates and closure plugs.
AP2GY
AP2I
FRP250
M-16
Description
Color
Catalog Numbers
Abandonment Plate: Used when a through-floor Gray
AP2GY
fitting is installed or left in the floor without its
Ivory
AP2I
corresponding flush service fitting.
Note: Abandonment plate is secured directly to the remaining through-floor fitting in
the floor (e.g., catalog number PT7FSD, PT73SD, or PT71SD).
Closure Plug: Closes abandoned or unused
Textured
FRP250
3” core holes in concrete floors. Will maintain
Aluminum
the fire rating of the floor up to four hours.
Plate Dimensions: .09” thick (2.2) x 6” diameter (152.4).
www.hubbell-wiring.com
Dimensions in Inches (mm)
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Flush Series – Furniture Feed (Single-Service)
Complies with UL514A
These single-service furniture feed flush poke-throughs are offered
as one-piece units (complete with flush service fitting and throughfloor fitting), or as two-piece units (flush service fitting and throughfloor fitting ordered separately).
Single-Service
Power or Voice/Data
Product Information - Single-Service Furniture Feed
• Flush Aluminum Service Fitting.
•
• Aluminum conduit cover with 1.11” (28.2)
knockout to accept a 3 /4” connector.
•
Applications Data
Mounted in core drilled 3”
(76.2) diameter hole
Floor thickness range: 2 1 /4”
to 7” (57.2 to 177.8).
• UL Listed for fire
• Finish: Epoxy paint (gray or ivory).
resistance in 1-4 hour
Annodized black and brushed
rated floors.
brass.
Note: The above product data pertains to both one-piece and two-piece units.
Dimensions
Single-Service Furniture Feed
Top View
Side View
PT7FFSDGY
1.11" (28.2)
knockout for
3/4" conduit
connector
8.50"
(215.9)
3
4
" EMT
7.00"
(177.8)
Single Service Furniture Feed Series
UL Listed Wiring Capacity
Power: Up to six #12 AWG and two #10 AWG type THHN wires or up to ten #12 AWG
type THHN wires, OR
Voice/Data: Up to 100 #22 AWG telephone/data conductors (or two 25 pair telephone
cables).
Rule of Thumb: Any combination of wire that does not exceed .06 sq. in. of total
allowable copper cross-sectional area is acceptable.
Note: When connecting conduit sweeps to through-floor fittings, ensure compliance
with NEC fill tables.
UL Characteristics
Listing
UL File Number
Outlet Box
E31999
Fire Resistance
R8429
For
use
in
1,
1
1/2,
2,
3,
or
4
hour
rated
unprotected
reinforced concrete floors, OR
ƒ
in
1,
2
or
3
hour
rated
floors
employing
steel
floor
units
and concrete topping (D900
ƒ
Series designs).
UL Spacing Restrictions – Minimum of 2 ft. O.C. and not more than one unit per
each 65 sq. feet of floor area in each span.
Dimensions in Inches (mm)
www.hubbell-wiring.com
M-17
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Low Voltage Large Capacity Flush Furniture Feed
Complies with UL514A
Two-Piece Units: Order flush
service fitting and through-floor
fitting separately.
Two-Piece Units- Low Voltage Application Only
Service Fitting- Painted Aluminum Flange
Description
Service fitting; includes 2” & 1 1/4”
combination knockout, painted aluminum flange.
Color
Brass
Gray
Black
Catalog Numbers
FF2BRS
FF2GY
FF2BK
FF2BRS
FF2BK
Through-Floor Fitting
Low Voltage Large Capacity Furniture Feed Series
Description
Single service fitting for use with FF2BRS, FF2GY and FF2BK.
Includes throw-away installation plate.
Catalog Number
PT2FIT
PT2FIT
Closure Plug
FRP250
M-18
Description
Closes abandoned or unused 3” cored holes in concrete floors.
Will maintain the fire rating of the floors up to 4 hours.
Plate dimensions: .09” thick (2.2) x 6” diameter (152.4).
www.hubbell-wiring.com
Catalog Number
FRP250
Dimensions in Inches (mm)
Low Voltage Large Capacity Furniture Feed Series
The Hubbell large capacity furniture feed poke-throughs are specifically
designed for feeding low voltage cables to furniture systems. They are
offered in two-piece units (flush service fitting and through-floor fitting
ordered separately). The above floor fitting incorporates a 2” and 1 1 /4”
combination knockout. The through-floor fitting installs in a 3” cored hole.
Product Information - Single-Service Furniture Feed
• Flush Aluminum Service Fitting.
•
• Aluminum conduit cover with 2.47” (62.7) and
1.74” (44.2) combination knockout to accept a
•
2” or 1 1 /4” flexible metal conduit connector.
• Finish: Gray, black or brass.
•
Complies with UL514A
Single-Service
Low Voltage Only
Applications Data
Mounted in core drilled 3”
(76.2) diameter hole.
Floor thickness range: 2 1 /4”
to 7” (57.2 to 177.8).
UL Listed for fire
resistance in 1-2 hour
rated floors.
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Dimensions
Single-Service Furniture Feed
Side View
Top View
2.47”
(62.7)
8”
(203.2)
Low Voltage Large Capacity Furniture Feed Series
11.86”
(301.2)
PT2FIT
1.74”
(44.2)
Listed Wiring Capacity
Voice/Data: Up to 36 low voltage cables at .21” (5.3) diameter.
Note: When connecting conduit sweeps to through-floor fittings, ensure compliance with
NEC fill tables.
UL Characteristics
Listing
UL File Number
Outlet Box
E31999
Fire Resistance
R8429
For
use
in
1,
1
1/2
or
2
hour
rated
unprotected
reinforced concrete floors, OR
ƒ
in
1
or
2
hour
rated
floors
employing
steel
floor
units and concrete topping (D900
ƒ
Series designs).
UL Spacing Restrictions – Minimum of 2 ft. O.C. and not more than one unit per each 65
sq. feet of floor area in each span.
Dimensions in Inches (mm)
www.hubbell-wiring.com
M-19
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Pedestal Series
Hubbell has a complete line of pedestal series fire-rated poke-throughs
including 2, 4, and 6 gang pedestals and your choice of 2” (50.8)
or 3” (76.2) diameter through-floor fittings. The 2 gang pedestal
is offered in either traditional style (brushed aluminum with stainless
steel face plates) or in the sleek low-profile style (aluminum with gray
or black textured paint).
ƒ Choose from two styles or three sizes of service pedestals.
ƒ Load pedestals with the widest variety of power & voice/data
devices.
ƒ 4 and 6 gang pedestals can be configured for different power &
Pedestal Series
voice/data combinations.
ƒ Available with 2” (50.8) or 3” (76.2) diameter through-floor
fittings.
ƒ Unequaled through-floor wiring capacity.
ƒ 4 Hour Fire Rating: All Hubbell pedestal series poke-throughs are
UL Listed and UL classified for fire resistance in 1-4 hour rated
floors. Canadian series units are CSA classified.
M-20
www.hubbell-wiring.com
Dimensions in Inches (mm)
Pedestal Series- Painted Aluminum
Complies with UL514A
Two-Gang Pedestals
Create your own unique two-gang pedestal (one-gang front & one-gang
back) by selecting the appropriate power and voice/data devices and
corresponding one-gang face plates (see page M-22). This service pedestal
is used with PT27A (2” [50.8] dia.) through-floor fitting. See page M-23 for
detailed product information on the PT27A.
Description
Color
Aluminum pedestal housing, frame and
Gray
low voltage barriers, excludes devices
Black
and face plates.
Note: See pages M-25 –26 for dimensional data and device options.
Catalog Numbers
FR280GYA
FR280BKA
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
FR280BKA
Four-Gang Pedestals
Four-gang pedestals provide two-gang front & two-gang back capability.
Select the appropriate power and voice/data devices and corresponding
one-gang face plates (see page M-22). This service pedestal is used with
PT27A (2” [50.8] dia.) or PT7XC (3” [76.2] dia.) through-floor fitting. See
page M-23 for detailed product information on the PT27A and PT7XC.
Description
Color
Aluminum pedestal housing, frame and
Gray
low voltage barriers, excludes devices
Black
and face plates.
Note: See pages M-25 –26 for dimensional data and device options.
Catalog Numbers
FR480GYA
FR480BKA
FR480GYA
Six-Gang Pedestals
Six-gang pedestals provide three-gang front & three-gang back capability.
Select the appropriate power and voice/data devices and corresponding
one-gang face plates (see page M-22). This service pedestal is used with
PT27A (2” [50.8] dia.) or PT7XC (3” [76.2] dia.) through-floor fitting. See
page M-23 for detailed product information on the PT27A and PT7XC.
Description
Color
Aluminum pedestal housing, frame and
Gray
low voltage barriers, excludes devices
Black
and face plates.
Note: See pages M-25 –26 for dimensional data and device options.
Catalog Numbers
FR680GYA
FR680BKA
FR680BKA
Low Voltage Barrier
Description
Low voltage barrier (optional).
Pedestal Series
Low voltage barriers for applications requiring additional separation of power
and low voltage services.
Catalog Number
FRBR1
FRBR1
Dimensions in Inches (mm)
www.hubbell-wiring.com
M-21
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Pedestal Series – Painted Aluminum
Complies with UL514A
Face Plates
SS2309DGYA
A variety of one-gang face plates are offered for the painted aluminum
pedestals to meet your application needs. These painted aluminum plates
are available in gray and black to match pedestal housings. Order one face
plate per pedestal gang.
Description
Duplex receptacle opening.
SS2309SGYA
SS2309BGYA
Color
Gray
Black
Single receptacle opening for 1.36” to 1.39”
Gray
face diameter.
Black
Blank.
Gray
Black
Furniture feed with 1.11” KO to accept 3/4”
Gray
flexible metal conduit connector.
Black
Furniture feed with 1.36” KO to accept 1”
Gray
flexible metal conduit connector.
Black
Voice/Data with 1” ID (25.4) bushed opening.
Gray
Black
Style Line opening for Style Line, GFCI,
Gray
surge receptacles and communication outlets.
Black
Note: See pages M-25--26 for dimensional data and device options.
Catalog Numbers
SS2309DGYA
SS2309DBKA
SS2309SGYA
SS2309SBKA
SS2309BGYA
SS2309BBKA
SS2309FGYA
SS2309FBKA
SS2309F1GYA
SS2309F1BKA
SS2309TGYA
SS2309TBKA
SS2309SLGYA
SS2309SLBKA
SS2309FGYA
4.39”
(111.50)
SS2309F1BKA
2.51”
(63.75)
3.28”
(83.31)
Pedestal Series
SS2309TGYA
SS2309SLBKA
M-22
www.hubbell-wiring.com
Dimensions in Inches (mm)
Pedestal Series – Painted Aluminum
Complies with UL514A
2 Inch Through-Floor Fitting
Description
Catalog Number
Through-floor fitting to be installed in a 2” (50.8) diameter
hole. Contains 3/4” EMT tube for low-voltage cabling and
1/2” EMT tube for power wiring for use with Hubbell FR280,
FR480 and FR680 series pedestals. This unit will
accommodate floor thicknesses of 2 1/4” to 7 inches (57.2 to 177.8).
PT27A
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Note: Hubbell PT27A through-floor fitting is approved for use in the city of Chicago.
PT27A
3 Inch Through-Floor Fitting
Description
Catalog Number
Through-floor fitting to be installed in a 3” (76.2) diameter
PT7XC
hole. Contains 1 1/4” EMT tube for low-voltage cabling and
1/2” EMT tube for power wiring for use with Hubbell FR480
and FR680 series pedestals (not for two-gang FR280 pedestals.)
This unit accommodate floor thicknesses of 2 1/4” to 7 inches (57.2 to 177.8).
Note: Hubbell PT27A through-floor fitting is approved for use in the city of Chicago.
PT7XC
Extension Kit
Catalog Number
Used to extend the floor thickness range of the Hubbell PT7XC
through-floor fitting when concrete floor thickness range is
between 7 and 13 inches (177.8 to 330.2). Kit includes 1/2” x 6”
long EMT tube, 1 1/4” long EMT tube, 1/2” EMT coupling and
1 1/4” EMT coupling.
EXT13
Pedestal Series
Description
EXT13
Dimensions in Inches (mm)
www.hubbell-wiring.com
M-23
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Pedestal Series – Painted Aluminum
Complies with UL514A
Abandonment Products
To maintain the fire-rating of the floor; two types of products are available:
abandonment plates and closure plugs.
AP22
Description
Used when 2-gang service pedestal is removed and the
through-floor fitting remains in the floor.
Dimensions: 5.88” x 6.75” (149.4 x 171.5).
Used when 4-gang service pedestal is removed and the
through-floor fitting remains in the floor.
Dimensions: 7.25” x 6.75” (149.4 x 171.5).
Catalog Numbers
AP22
AP42
AP42
Closure Plug Textured Aluminum
Description
Closes abandoned or unused 3” (76.2) core holes in concrete floors.
Will maintain the fire rating of the floor up to four hours.
Plate dimensions: .09” thick (2.2) x 6” diameter (152.4).
Catalog Number
FRP250
Pedestal Series
FRP250
M-24
www.hubbell-wiring.com
Dimensions in Inches (mm)
Pedestal Series – Painted Aluminum
Complies with UL514A
Painted Aluminum
Two, Four and Six-Gang
Pedestals
This series of pedestal-type fire-rated poke-throughs is available in
two, four and six-gang versions which are equipped with low-voltage
barriers to permit power and voice/data in one pedestal. These
attractive pedestals are constructed of a heavy gauge galvanized
steel frame with a gray or black painted aluminum housing. Throughfloor fittings (in both 2” [50.8] and 3” [76.2] diameter versions) are UL
Listed for use in 1 to 4 hour fire-rated floors and are designed to safely
deliver a maximum amount of wire and cabling to the workstation.
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Dimensions
2 Gang - FR280 series
Total Cubic Inch Capacity (single service)
Cubic Inch Capacity
(when divided for multi-service)
Service Pedestal Construction
Pedestal Finish
39.00” (638.8cm3).
Power
19.5” (319.4cm3).
Voice/Data
19.5” (319.4cm3).
Heavy gauge galvanized steel frame with aluminum housing and face plates.
Textured gray or black epoxy paint.
4 Gang - FR480 series
Total Cubic Inch Capacity (single service)
Cubic Inch Capacity
(when divided for multi-service)
Service Pedestal Construction
Pedestal Finish
78.00” (1277.6cm3).
Power
39.00” (638.8cm3).
Voice/Data
39.00” (638.8cm3).
Heavy gauge galvanized steel frame with aluminum housing and face plates.
Textured gray or black epoxy paint.
6 Gang - FR680 series
Dimensions in Inches (mm)
Pedestal Series
Total Cubic Inch Capacity (single service)
Cubic Inch Capacity
(when divided for multi-service)
Service Pedestal Construction
Pedestal Finish
117.00” (1916.4cm3).
Power
58.5” (958.2cm3).
Voice/Data
58.5” (958.2cm3).
Heavy gauge galvanized steel frame with aluminum housing and face plates.
Textured gray or black epoxy paint.
www.hubbell-wiring.com
M-25
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Pedestal Series – Painted Aluminum
Complies with UL514A
Dimensions
PT27A
7.25"
(184.2)
3/4" EMT
Voice/Data
Tube
PT7XC
8.25"
(209.6)
9.25"
(235.0)
10.25"
(260.4)
1 1/4" EMT
Voice/Data
Tube
1/2" EMT
Power
Tube
1/2" EMT
Power
Tube
Applications
PT27A
PT7XC
Mounting
Floor Thickness Range
Fire Rating
2” (50.8) diameter hole.
2 1/4” to 7” (57.2 to 177.8)
For use in 1, 1 1/2, 2, 3 or 4 hour
rated unprotected reinforced concrete
floors or in 1, 2 or 3 hour rated floors
employing steel floor units and
concrete topping (D900 series design).
FR280, FR480, FR680 Series.
3” (76.2) diameter hole.
2 1/4” to 7” (57.2 to 177.8)
For use in 1, 1 1/2, 2, 3 or 4 hour
rated unprotected reinforced concrete
floors or in 1, 2 or 3 hour rated floors
employing steel floor units and
concrete topping (D900 series design).
FR480 and FR680 Series.
Service Pedestal Options
UL Listed Wiring Capacity
Power Wiring Capacity
Voice/Data Wiring Capacity
Total Allowable
Copper Cross-Sectional Area
Rule of Thumb
1 /2”
inch EMT power tube
Handles:
Up to ten #12 AWG type THHN wires, or
Up to six #12 AWG and
two #10 AWG type THHN wires.
3 /4” inch EMT low-voltage tube
Handles:
Up to two 25 pair tel./data cables
(100 #22 AWG tel./data conductors), or
Up to two IBM Type 2 data cables.
.11 sq. in.
1 /2” inch EMT power tube
Handles:
Up to ten #12 AWG type THHN wires, or
Up to six #12 AWG and two
#10 AWG type THHN wires
11 /4” inch EMT low-voltage tube
Handles:
Up to four 25 pair tel./data cables
(200 #22 AWG tel./data conductors), or
Up to five IBM Type 2 data cables and
four 8-conductor tel./data cables.
.16 sq. in.
Any combination of wire that does not exceed the total allowable copper cross sectional
area is acceptable.
Note: When connecting conduit sweeps to through-floor fittings, ensure compliance with N.E.C. fill tables.
Pedestal Series
UL Characteristics
Listing
UL File Number
Outlet Box
E31999
Fire Resistance
R8429
„ For use in 1, 11 /2, 2, 3, or 4 hour rated unprotected reinforced concrete floors OR
„ in 1, 2 or 3 hour rated floors employing steel floor units and concrete topping
(D900 Series designs).
UL Spacing Restrictions – Minimum of 2 ft. O.C. and not more than one unit per each
65 sq. feet of floor area in each span.
Chicago Approved
Catalog Numbers
City of Chicago File Number
PT27A, PT7XC
5587E
These through-floor fittings are approved for the city of Chicago. Installation requires a
plenum-rated 1900 series box or a handy box with gasketed cover. These boxes are to
be affixed with compression gland-type connectors.
M-26
www.hubbell-wiring.com
Dimensions in Inches (mm)
Pedestal Series – Satin Anodized Aluminum
Complies with UL514A
Create Pedestal
Order pedestal housing (FR80AL) and stainless steel face plates
separately, excludes receptacles.
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Pedestal Housing
Description
Catalog Number
Includes cast aluminum frame, fiber barrier, and brushed aluminum FR80AL
housing (excludes face plates and devices).
FR80AL
Face plates
Description
Blank.
Duplex receptacle opening.
Style Line® opening (for Style Line receptacles and
communication outlets).
Single receptacle opening (for 1.360” - 1.390” [34.5 - 35.3] face
diameter).
Aluminum - furniture feed (with 1.11” KO to accept 3 /4”
flexible metal conduit connector).
Aluminum - blank (used with Hubbell SS309SF).
Voice/data with 1.00” I.D. (25.4) dia. bushed opening
and two (2) 3 /8” (9.53) dia. KO’s.
Catalog Numbers
SS309B
SS309D
SS309DS
SS309S
SS309S
SS309SF
SS309SF
SS309B
SS309BF
SS309D
SS309T
SS309DS
SS309BF
SS309T
Through-Floor Fitting
Each FR80AL series pedestal requires a PT7XC through-floor fitting.
Description
Catalog Number
Through-floor fitting to be installed in a 3” (76.2) diameter hole.
PT7XC
Contains a 11 /4” EMT tube for low-voltage cabling and
1 /2” EMT tube for power wiring.
This unit will accommodate floor thicknesses of 21 /4” to 7”
(57.2 to 177.8). Order extension kit Hubbell EXT13 for thicker floors.
Note: PT7XC through-floor fitting is approved for use in the city of Chicago.
Pedestal Series
PT7XC
Dimensions in Inches (mm)
www.hubbell-wiring.com
M-27
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Pedestal Series – Satin Anodized Aluminum
Complies with UL514A
Extension Kit
Description
Used to extend the floor thickness range
of the Hubbell PT7XC through-floor fitting when
concrete floor thickness range is between
7” and 13” (177.8 to 330.2). Kit includes 1 /2” x 6”
long EMT tube, 11 /4” x 6” long EMT tube, 1 /2”
EMT coupling and 11 /4” EMT coupling.
Catalog Number
EXT13
EXT13
Closure Plug-Textured Aluminum
Description
Closes abandoned or unused 3” core holes in
concrete floors. Will maintain the fire rating of the floor up to
four hours. Dimensions: .09” thick (2.2) x 6” diameter (152.4).
Catalog Number
FRP250
Pedestal Series
FRP250
M-28
www.hubbell-wiring.com
Dimensions in Inches (mm)
Pedestal Series
Satin Anodized Aluminum
Complies with UL514A
Satin Anodized Aluminum
Two-Gang Pedestals
This poke-through series is outfitted with a traditional satin anodized
aluminum pedestal and stainless steel face plates. These two-gang units
are equipped with barrier to permit power and voice/data in one attractive
service pedestal. An expanded capacity 3” (76.2) diameter through-floor
fitting provides maximum delivery of power and voice/data cabling while
maintaining a fire-rating of 1 to 4 hours. These poke-throughs are available
in component form for maximum versatility.
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Dimensions
Complete Units
Top Inside View of Pedestal
Separate Components
Through-Floor
Fitting
Pedestal
Power
Voice/Data
2.50"
(63.5)
10.75"
(273.1)
12.8"
(323.9)
8.25"
(209.6)
4.50"
(114.3)
10.25"
(260.4)
4.38"
(111.3)
1
2"
EMT
Power
Tube
Integral
LowVoltage
Divider
Fiber
Barrier
Cubic Inch Capacity (cm3)
Power: 15.4 (252.4cu cm)
Voice/Data 17.6 (288.5cu cm)
1
1 4 " EMT
Voice/Data
Tube
Applications Data
Mounting
Floor Thickness Range
Fire Rating
3 inch (76.2) diameter hole through concrete floor.
2 1 /4”-7” (57.2-177.8) (Note: Use EXT13 extension kit for thicker floors).
1-4 hours.
Pedestal Construction
Housing Material
Face Plates Material
Frame Material
Base Material
Satin anodized aluminum (brushed).
302/304 stainless steel.
Die cast aluminum.
Gasketed for tile or carpet floor applications.
Pedestal Series
Dimensions in Inches (mm)
www.hubbell-wiring.com
M-29
Fire-Rated Poke-Throughs
Fire-Rated Poke-Throughs
Pedestal Series
Satin Anodized Aluminum
Complies with UL514A
UL Listed Wiring Capacity
Power Wiring Capacity
Voice/Data Wiring Capacity
Total Allowable
Copper Cross-Sectional Area
Rule of Thumb
1 /2”
inch EMT power tube. Handles:
Up to ten #12 AWG type THHN wires, OR
Up to six #12 AWG and two #10 AWG type THHN wires.
11 /4” inch EMT low-voltage tube. Handles:
Up to four 25 pair tel./data cables (200 #22 AWG tel./data conductors).
.16 sq. in
Any combination of wire that does not exceed .16 sq. in. of total allowable copper
cross-sectional area is acceptable.
Note: When connecting conduit sweeps to through-floor fittings, ensure compliance
with NEC fill tables.
UL Characteristics
Listing
UL File Number
Outlet Box
E31999
Fire Resistance
R8429
„ For use in 1, 11 /2, 2, 3, or 4 hour rated unprotected reinforced concrete floors, OR
„ in 1, 2 or 3 hour rated floors employing steel floor units and concrete topping
(D900 Series designs).
UL Spacing Restrictions – Minimum of 2 ft. O.C. and not more than one unit per
each 65 sq. feet of floor area in each span.
Chicago Approved
Pedestal Series
These through-floor fittings are approved for the city of Chicago. Installation requires a
plenum-rated 1900 series box or a handy box with gasketed cover. These boxes are
to be affixed with compression gland-type connectors.
M-30
www.hubbell-wiring.com
Dimensions in Inches (mm)