NIGHT-LITE PRO SERIES
NIGHT-LITE PRO
PARTS MANUAL
Serial Number 0294PRO02 and Up
ALLMAND BROS. INC
P.O. BOX 888
HOLDREGE, NE 68949
PHONE: 308/995-4495, 1-800/562-1373
ALLMAND FAX: 308/995-5887
ALLMAND PARTS FAX: 308/995-4883
NIGHT-LITE PRO SERIES
* Use these codes to designate color needed:
SEPTEMBER 2001
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
For Parts and Updates visit Allmand on the Web at www.allmand.com
NIGHT-LITE PRO SERIES
SHO 1000 METALLIC VAPOR LAMP
A-1A
19
15
21
NIGHT-LITE PRO SERIES
SHO 1000 METALLIC VAPOR LAMP
NO
REQ’D
PART NO
NS
610250
NS
NS
610265
610255
NS
610253
NS
NS
650144
610263
1
2
2A
3
4
5
6
7
8
9
NS
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
27A
28
29
30
31
32
33
34
35
36
37
38
39
40
41
1
1
1
2
2
8
8
1
2
1
1
1
1
1
2
1
2
4
2
1
2
2
4
2
2
1
1
1
1
1
1
1
1
1
1
1
2
1
2
1
2
610208
610211
610218
**
**
041028
043017
610207
044013
610209
650250
610210
610212
610201
610213
610206
044037
047019
045142
680493
047016
044031
041035
610260
610235
044018
610234
610236
650159
310434
510007
610214
610215
610205
**
**
**
610203
610217
044019
610202
045070
610017
044016
DESCRIPTION
A-1B
LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT.)
(REM. FIXTURES)
LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT.) (HPS)
LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS
(CUSHION MT.)
LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS
(CUSHION MT.) (HPS)
LAMP HOLDER ASSEMBLY WITH YOKE AND LAMP
LAMP HOLDER ASSEMBLY WITH YOKE AND CUSHIONS, W/ HPS LAMP
(CUSHION MOUNT)
ALUMINUM RING
LAMP BT-37
LAMP 1000W SHO ED37 (HPS)
#8 WASHER (STAINLESS STEEL)
#8-32 NC X 1/2 HEX HEAD BOLT (STAINLESS STEEL)
#10-24 NC X 1/2 HEX HEAD BOLT (STAINLESS STEEL)15
#10 INTERNAL TOOTH WASHER
ALUMINUM PLATE
#8 -32 NC NYLON INSERT NUT (STAINLESS STEEL)
LAMP TIP SUPPORT
LAMP TIP SUPPORT (HIGH PRESSURE SODIUM)
LAMP TIP SUPPORT TUBE
CERAMIC SOCKET
REFLECTOR
END HOUSING GASKET
RH SOLID END CASTING
3/8 - 24 NF NYLON INSERT NUT
.75 OD x.385 ID x.20 NYLON WASHER
3/8 - 24 NF X 3/8 - 16 NC X 2" STUD
SOLID MOUNT YOKE
3/8 SAE WASHER
5/16-18 KEPS NUT
#10 - 24 NC X 1 1/4 ROUND HEAD BOLT
RUBBER SHOCK MOUNT SHO 1000
SHO CUSHION MOUNT PLATE
10-24 NYLON LOCK NUT
SHO 1000 CUSHION MOUNT YOKE
SHO 1000 CUSHION MOUNT YOKE ASSEMBLY
16/3 PORTABLE CORD 66
LAMP CONNECTOR AND LEAD (REMOVEABLE FIXTURE ONLY)
1/2-CORD GRIP
1/2” ENTRANCE ELBOW
1/2 CONDUIT NIPPLE
LH SOCKET END CASTING
GREEN HEAT TEMP WIRE
BLACK HEAT TEMP WIRE
WHITE HEAT TEMP WIRE
LENS
LENS GASKET (SILICONE)
#10-24 NYLON INSERT NUT (STAINLESS)
LENS CHANNEL SET
#10-24 NC SQ BD HOOK BOLT (W/VISOR) LEGEND: NS= Not Shown
** =Purchase locally
SHO 1000 LIGHT VISOR (OPTIONAL
#10-24 NC KEPS NUT
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
MANUAL WINCH TOWER ASSEMBLY
B-1A
NIGHT-LITE PRO SERIES
MANUAL WINCH TOWER ASSEMBLY
B-1B
NO
REQ’D
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
2
3
1
1
8
1
2
3
8
8
14
8
1
1
1
2
1
1
1
1
1
1
1
1
3
3
3
1
1
19
20
21
22
23
24
25
26
27
28
29
30
PART NO
680102*
320110
620550
650110
352280
043100
310212
046242
046200
044048
046015
044023
047009
041023
680180*
352017*
620511
047030
047030
044053
650145
047025
610531
712032
046110
047010
044038
320410
320453
DESCRIPTION
4" MANUAL WINCH TOWER WELDMENT
3” PULLEY W/BUSHING
1/2 - 13 NC X 2 1/8 LOCKING KNOB
.312 TOWER PAD
PLASTIC TOWER PAD
5/8 INTERNAL TOOTH LOCK WASHER
#8 CUSHION CLAMP
5/8 - 11 NC X 1 GRADE 5 BOLT
1/2 - 13 NC X 2 1/4 GRADE 5 BOLT
1/2 -13 NC NYLON INSERT NUT
1/4 - 20 NC X 1” GRADE 5 HEX BOLT
1/4 - 20 NC NYLON INSERT NUT
1/4” FLATWASHER STAINLESS STEEL
#10 X 3/8 SELF-TAPPING PLASTIC SCREW
3" TOWER WELDMENT MANUAL WINCH
2-5/8" MANUAL TOWER WELDMENT FOR REM. LIGHT BAR
WELDMENT, TOWER SUPPORT
5/8 FLAT WASHER (with painted tower)
5/8 FLAT WASHER (with galvanized tower)
5/8 - 11 NC NYLON INSERT NUT
MAST LOCKING BAR
1/2” PLATED FLAT WASHER
DLB 1200 BRAKE WINCH - PLATED
1/2” NUT (SUPPLIED WITH WINCH)
WINCH SPRING (SUPPLIED WITH WINCH)
HANDLE FOR DLB 1200 - 7"
3/8 - 16 NC X 1 GRADE 5 BOLT
5/16” FLAT WASHER
3/8 -16 NC NYLON INSERT NUT
CORD REEL (OPTIONAL)
3/16” X 1-3/4” ROLL PIN
* Use these codes to designate color needed:
LEGEND: NS= Not Shown
** =Purchase locally
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
MANUAL WINCH TOWER CABLE ROUTING
B-2A
NIGHT-LITE PRO SERIES
MANUAL WINCH TOWER CABLE ROUTING
B-2B
NO
REQ’D
1
2
3
4
5
6
7
2
1
1
1
1
1
1
PART NO
620084
045040
620076
650140
650133
320185
352016
650130*
DESCRIPTION
WIRE ROPE CLIP 3/16"
WIRE ROPE THIMBLE, 1/4"
STEEL CABLE 3/16- X 11'
MAST WIRING - 14/7 X 324" (STRAIGHT CORD)
STEEL CABLE 3/16” X 17’9"
STEEL CABLE 3/16" X 10’
MAST WIRING - 16/8 X 344" (CORD REEL 4 LIGHT)
MANUAL WINCH TOWER COMPLETE
WITH LIGHT BAR ASSEMBLY
INSTRUCTIONS FOR REPLACING STEEL CABLES.
3/16" X 11'
REMOVE THE CUSHION CLAMPS AND MAST WRING FROM 3" MAST SECTION.
REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION. REMOVE THE 3" PULLEY AT
THE END OF THE 3" MAST SECTION.
REMOVE THE 2 5/8" ROUND MAST SECTION. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE
NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION. REPLACE 2 5/81' ROUND
MAST SECTION IN THE 3" MAST SECTION. ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL
3" PULLEY. WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK AND
REINSTALL WIRE ROPE CLIPS. REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3” MAST
SECTION.
3/16" X 17’9"
REMOVE MAST WRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC)
REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 4" MAST SECTION.
REMOVE STOP BOLT AND WASHER.
REMOVE 4 TOWER PADS AND 3" PULLEY AT THE END OF THE 4" MAST SECTION.
REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER.
REMOVE ALL BROKEN AND FRAYED CABLE.
REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND
THROUGH PULLEY BRACKETS.
REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS.
REPLACE 3" PULLEY AND 4" TOWER PADS.
ATTACH CABLE TO WINCH AND WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.
REPLACE STOP BOLT AND WASHER.
REPLACE CUSHION CLAMPS AND MAST WIRING ON 4" MAST SECTION.
REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC)
3/16" X 10’
REMOVE ALL BROKEN AND FRAYED CABLE. FEED NEW CABLE THROUGH EYELET IN MAST PIVOT
SECTION.
FEED THROUGH PULLEY BRACKETS AND AROUND PULLEY IN FRONT UPRIGHTS. ATTACH CABLE TO
WINCH AND WIND IN CLOCKWSE DIRECTION UNTIL ALL SLACK IS OUT.
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ELECTRIC WINCH TOWER ASSEMBLY
B-3A
ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY
NIGHT-LITE PRO SERIES
ELECTRIC WINCH TOWER ASSEMBLY
NO
REQ’D
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
1
3
2
1
1
1
2
1
1
1
8
1
5
5
2
2
2
2
1
1
4
9
8
14
8
1
1
1
1
PART NO
680184*
320112
320110
620579
620577
620550
650110
352280
043100
046242
022022
090309
046200
044048
046110
044080
046105
043070
046438
712061
046010
044023
046015
047009
041023
680185*
352050*
320410*
320453
DESCRIPTION
B-3B
WELDMENT, 4” TOWER, ELECTRIC
2 1/2" PULLEY W/BUSHING
3" PULLEY
LOCK SPRING
LOCK HANDLE
LOCKING KNOB 1/2 - 13 NC X 2 1/8”
PLASTIC TOWER PAD, .312
PLASTIC TOWER PAD 5/16 SHORT
5/8 INTERNAL TOOTH LOCK WASHER
5/8 - 11 NC X 1 GRADE 5 BOLT
#8 CUSHION CLAMP
SPRING LATCH RELEASE DECAL
1/2 - 13 NC X 2 1/4 GRADE 5 BOLT
1/2 - 13 NC NYLON INSERT NUT
3/8 - 16 NC X 1 GRADE 5 BOLT
3/8 - 16 NC TOPLOCK NUT
3/8 - 16 NC X 3/4 GRADE 5 BOLT
3/8 INTERNAL TOOTH LOCK WASHER
1/4” X 3” QUICK RELEASE PIN
STEEL LANYARD
1/4 - 20 NC X 3/4 GRADE 5 BOLT
1/4 - 20 NC NYLON INSERT NUT
1/4 - 20 NC X 1” GRADE 5 BOLT
1/4” SS FLAT WASHER
#10 X 3/8 SELF TAPPING PLASTIC SCREW
3" ELECTRIC WINCH TOWER WELDMENT
REMOVEABLE LIGHT BAR 2 5/8” ROUND TOWER WELDMENT
CORD REEL (used on cord reel towers only)
3/16 X 1 3/4 ROLL PIN (used on cord reel towers only)
ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY
NO
1
2
3
4
5
6
7
REQ’D
1
1
1
1
2
1
1
PART NO
620570*
620545
352168
620550
047055
047025
044048
DESCRIPTION
TOWER SUPPORT WELDMENT, ELECTRIC WINCH
3/4 PLATED HAIRPIN CLIP
MAST LOCKING BAR, ELECTRIC WINCH
LOCKING KNOB 1/2 - 13 NC X 2 1/8”
1” NARROW RIM PLATED MACHINE BUSHING
1/2” PLATED FLAT WASHER
1/2 - 13 NC NYLON INSERT NUT
* Use these codes to designate color needed:
LEGEND: NS= Not Shown
** =Purchase locally
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ELECTRIC WINCH STRAIGHT CORD TOWER CABLE ROUTING
B-4A
NIGHT-LITE PRO SERIES
ELECTRIC WINCH STRAIGHT CORD TOWER CABLE ROUTING
NO
REQ’D
PART NO
DESCRIPTION
1
2
3
4
5
NS
2
1
1
1
1
620084
045040
650438
320185
352054
650429*
WIRE ROPE CLIP 3/16"
WIRE ROPE THIMBLE, 1/4"
MAST WIRING - 14/7 X 324" (4-LIGHT)
NS
650343*
B-4B
STEEL CABLE 7/32" X 26'
ELECTRIC WINCH, STRAIGHT CORD TOWER COMPLETE
WITH 4-LIGHT LIGHT BAR ASSEMBLY
ELECTRIC WINCH, STRAIGHT CORD TOWER COMPLETE
WITHOUT LIGHT BAR ASSEMBLY
INSTRUCTIONS FOR REPLACING STEEL CABLES
3/16 X 10'
REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 3" MAST SECTION.
REMOVE LIGHT BAR BY REMOVING 4 NUTS ON BAR AND LAY BAR ON GROUND.
REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION.
REMOVE THE 3" PULLEY AT THE END OF THE 3" MAST SECTION.
REMOVE THE 2 5/8" ROUND MAST SECTION.
REMOVE ALL BROKEN AND FRAYED CABLE.
REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION.
REPLACE 2 5/8" ROUND MAST SECTION IN THE 3" MAST SECTION.
ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL 3" PULLEY.
WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK
AND REINSTALL WIRE ROPE CLIPS.
REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3" MAST SECTION.
7/32 X 26'
REMOVE CABLE FROM WINCH.
REMOVE MAST WIRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC)
REMOVE TOWER ASSEMBLY FROM TRAILER.
REMOVE STOP BOLT AND WASHER.
REMOVE 4 NYLON ROLLERS AND 3" PULLEY AT TOP END OF 3" SQUARE SECTION.
REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER.
REMOVE 2 1/2" PULLEY FROM END OF 4" SECTION.
REMOVE ALL BROKEN AND FRAYED CABLE.
REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND
THROUGH PULLEY BRACKETS.
REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS.
REPLACE 3" PULLEY AND 4 NYLON ROLLERS.
REPLACE STOP BOLT AND WASHER.
RUN NEW CABLE ON OUTSIDE OF 4" SECTION.
REPLACE 2 1/2" PULLEY.
REPLACE TOWER ASSEMBLY ON TRAILER.
REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC)
RUN NEW CABLE THROUGH PULLEY BRACKETS IN FRONT OF TRAILER.
ATTACH CABLE TO ELECTRIC WINCH.
WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.
* Use these codes to designate color needed:
LEGEND: NS= Not Shown
** = Purchase locally
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY
B-5A
11
NIGHT-LITE PRO SERIES
4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY
B-5B
NO
1
2
3
4
5
6
7
7A
8
9
10
11
REQ’D PART NO
10
4
8
1
1
10
1
1
4
1
4
NS
1
1
352042*
**
**
**
620537*
650319*
**
310033
022039
**
711029
310414
022020
620514*
352050*
DESCRIPTION
LIGHT BAR ASSEMBLY, 4-LIGHT
1/4 - 20 NC X 1/2 CARRIAGE BOLT
3/4 - 10 NC NYLON INSERT NUT
3/4 FLAT WASHER
LIGHT BAR COVER PLATE
LIGHT BAR FRAME ONLY
1/4 - 20 NC KEPS NUT
CORD GRIP NUT - METAL
1/2" BUSHING
5/16 - 18 NC KEPS NUT
LOCKING HOLE PLUG
LAMP CONNECTOR, FEMALE
3/8” 2 SCREW ROMEX CLAMP
2 5/8 ROUND TOWER SECTION (Manual removeable light bar)
2 5/8 ROUND TOWER SECTION (Electric removeable light bar)
LEGEND: NS = Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-1A
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-1B
NO
REQ’D
2
1
1
1
1
1
2
2
2
10
10
2
1
1
10
1
1
1
1
2
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
NS
NS
NS
NS
PART NO
650235
680558
680879
330013
330014
049040
650297
712116*
047010
044031
650387*
650100
032026
046050
024002
713098
027025
027025
044031
340017
433507
330012A
650169
712111B
712111
330009
650236
DESCRIPTION
SIDE CRANK JACK, SNAP RING (SHOWN)
SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN)
TOP CRANK JACK, TUBE MOUNT (NOT SHOWN)
JACK LOCK PIN (USE WITH 680558 and 680879)
JACK SNAP RING 2 5/16 XT (USE WITH 650235)
SAFETY CHAIN SET
FENDER, MOLDED BLACK
SPOKE WHEEL
5/16 FLAT WASHER
5/16 - 16 NC KEPS NUT
SPOKE WHEEL AND 13" TIRE
AXLE ASSEMBLY
AXLE MOUNTING HARDWARE KIT
5/16 - 18 NC X 1 CARRIAGE BOLT
12 VOLT BATTERY
NEGATIVE BATTERY CABLE - 36"
NEGATIVE BATTERY CABLE - 48" (PERKINS)
POSITIVE BATTERY CABLE - 48"
5/16 -18 NC NYLON INSERT NUT
NYLON BATTERY HOLD DOWN
J-BOLT 5/16 X 11 “
JACK HOLE PIN KIT
COUPLING KIT
BEARING SET
AXLE HUB (INCLUDES RACES AND BEARING SET)
JACK MOUNTING BRACKET WITH SNAP RING
PLASTIC JACK CAP
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-1C
13
12
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-1D
NO
1
2
3
4
5
6A
7
8
9
10
11
12
13
NS
REQ’D
PART NO
1
1
1
1
1
2
2
2
2
1
650235
680558
680879
330013
330014
046250
046160
049040
044061
712540-20
2
1
2
4
2
2
046220
712021
044062
047015
044043
712552
650398-20
651225-20
DESCRIPTION
SIDE CRANK JACK, SNAP RING (SHOWN)
SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN)
TOP CRANK JACK, TUBE MOUNT (NOT SHOWN)
JACK LOCK PIN (USE WITH 680558 and 680879)
JACK SNAP RING 2 5/16 XT (USE WITH 650235)
5/8 -11 NC X 4 1/2 GRADE 5 BOLT
7/16 -14 NC X 1 1/2 GRADE 5 BOLT
SAFETY CHAIN WITH S HOOK AND KEEPER
5/8 -11 NC TOPLOCK NUT
HITCH CHANNEL WITH PINTLE
(After Nov. 1, 2004 S/N 0273PRO05 Cast Galvanized)
1/2 -13 INC X 4 GRADE 5 BOLT
BALL COUPLER ONLY
1/2 -13 NC TOPLOCK NUT
3/8 FLAT WASHER
7/16 -14 NC NYLON LOCK NUT
HITCH PLATE
REMOVEABLE TONGUE/SNAP RING
REMOVEABLE TONGUE/TUBE MOUNT
(After Sept. 25, 2006 S/N 2310PRO006)
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2A
ISUZU 3LB1
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2B
ISUZU 3LB1
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
REQ’D
2
2
2
2
8
4
2
4
12
1
1
2
4
1
1
1
1
4
1
6
4
4
1
1
PART NO
330012
330010
330014
650115*
047009
044023
041075
044036
047010
@@
**
650129
046110
650112*
045145
330450
650210*
046010
330012A
045110
044033
046050
650722
650723
DESCRIPTION
REPLACEMENT HANDLE
LONG JACK
JACK SNAP RING 2 5/16 XT
OUTRIGGER (LEFT AND RIGHT)
1/4FLATWASHER STAINLESS STEEL
1/4-20 NC NYLON INSERT NUT
5/16-18 NC X 3/4 SELF-TAPPING SCREW
3/8-16 NC KEPS NUT
5/16 FLAT WASHER
RADIATOR
RADIATOR CAP
TAIL LIGHT
5/16-18 NC X 1 GRADE 5 BOLT
REAR TOWER SUPPORT
1/4 X 1 1/2 ROLL PIN
REAR TOWER SUPPORT PIN
REAR PANEL, ISUZU 1” R
1/4-20 NC X 3/4 STAINLESS STEEL BOLTS
REPLACEMENT JACK HOLE PIN KIT
3/16 ALUMINUM RIVET
5/16 - 18 NC NYLON INSERT NUT
5/16 - 18 X 1 GRADE 5 BOLT
LEFT OUTRIGGER RETENTION PIN
RIGHT OUTRIGGER RETENTION PIN
LEGEND: NS= Not Shown
** = Purchase locally
@@ = Contact local Isuzu Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2C
KUBOTA D905-BG
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2D
KUBOTA D905-BG
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
REQ’D
2
2
2
2
1
8
4
2
4
14
1
1
2
4
1
1
1
1
4
1
2
6
4
4
1
1
PART NO
330012
330010
330014
650115*
920472
047009
044023
041075
044036
047010
Call Factory
**
650129
046110
650112*
045145
330450
650283*
046010
330012A
**
045110
044033
046050
650722
650723
DESCRIPTION
REPLACEMENT HANDLE
LONG JACK
JACK SNAP RING 2 5/16 XT
OUTRIGGER (LEFT AND RIGHT)
COOLANT OVERFLOW TANK
¼” FLATWASHER
1/4-20 NC NYLON INSERT NUT
5/16-18 NC X 3/4 SELF-TAPPING SCREW
3/18-16 NC KEPS NUT
5/16 FLAT WASHER
RADIATOR
RADIATOR CAP
TAIL LIGHT
3/8 - 16 NC X 1 GRADE 5 BOLT
REAR TOWER SUPPORT
1/4 X 1 1/2 ROLL PIN
REAR TOWER SUPPORT PIN
REAR PANEL, 1 “ R
1/4-20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL
REPLACEMENT JACK HOLE PIN
CABLE TIE
3/16 ALUMINUM RIVET
5/16 -18 NC NYLON INSERT NUT
5/16-18 X 1 GRADE 5 BOLT
LEFT OUTRIGGER RETENTION PIN
RIGHT OUTRIGGER RETENTION PIN
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2E
PERKINS 103.10/LOMBARDINI LDW 903
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
PERKINS 103.10/LOMBARDINI LDW 903
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
REQ’D
2
2
2
8
4
2
10
2
1
1
1
1
1
4
1
6
4
4
1
1
PART NO
330012
330010
330014
650115*
047009
044023
041075
047010
650129
650112*
045145
330450
650283*
650767*
046010
330012A
045110
044033
046050
650722
650723
C-2F
DESCRIPTION
REPLACEMENT HANDLE
LONG JACK
JACK SNAP RING 2 5/16 XT
OUTRIGGER (LEFT AND RIGHT)
¼” FLAT WASHER
1/4-20 NC NYLON INSERT NUT
5/16-18 NC X 3/4 SELF-TAPPING SCREW
5/16 FLAT WASHER
TAIL LIGHT
REAR TOWER SUPPORT
1/4 X 1 1/2 ROLL PIN
REAR TOWER SUPPORT PIN
REAR PANEL, 1 “ R PERKINS/CAT
REAR PANEL, 1 “ R LOMBARDINI
1/4-20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL
REPLACEMENT JACK HOLE PIN KIT
3/16 ALUMINUM RIVET
5/16 -18 NC NYLON INSERT NUT
5/16 - 18 X 1 GRADE 5 BOLT
LEFT OUTRIGGER RETENTION PIN
RIGHT OUTRIGGER RETENTION PIN
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2G
REAR PANEL WITH TOWER LIMIT SWITCH
CABLE ELECTRIC ONLY
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
REAR PANEL WITH TOWER LIMIT SWITCH
CABLE ELECTRIC ONLY
NO
REQ’D
PART NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
1
1
1
1
1
1
1
3
1
1
1
2
2
1
4
2
1
2
1
1
2
2
2
1
650435
650432
022136
650434-15
330450
045145
022020
650112*
022016A
022016
650433*
046040
041006
046110
046050
047010
044036
044033
044023
046015
047009
041017
044004
044004
041050
26
2
043050
C-2H
DESCRIPTION
REAR LIMIT SWITCH
REAR LIMIT SWITCH WIRING HARNESS
5/8 SNAP BUSHING
LIMIT SWITCH ACTUATOR CAM
REAR TOWER SUPPORT PIN
1/4 X 1 1/2 ROLL PIN
2-SCREW ROMEX CLAMP, 3/8
REAR TOWER SUPPORT
3/8 CUSHION CLAMP (BOLT HOLE 3/8)
3/8 CUSHION CLAMP (BOLT HOLE 1/4)
REAR LIMIT SWITCH COVER
1/4 - 20 NC X 5 GRADE 5 BOLT
#6 - 32 X 1 1/4 BOLT
3/8 - 16 NC X 1 1/4 GRADE 5 BOLT
5/16 - 18 NC X 1 GRADE 5 BOLT
5/16 FLAT WASHER
3/8- 16 NC KEPS NUT
5/16 -18 NC NYLON INSERT NUT
¼ -20 NC NYLON INSERT NUT
¼ -20 NC X 1 GRADE 5 BOLT
1/4 STAINLESS STEEL FLAT WASHER
#6 - 32 NC X 3/8 BOLT
#6 - 32 NC KEPS NUT
#6 - 32 NC KEPS NUT
1/4 - 20 NC X 3/4 PHILLIPS HEAD TRUSS HEAD SCREW
(STAINLESS STEEL)
1/4 INTERNAL TOOTH LOCK
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2I
ISUZU 3LB1
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2J
ISUZU 3LB1
NO
1
2
3
4
5
6
7
8
9
10
11
REQ’D
PART NO
1
1
1
1
4
4
4
4
4
4
4
650267*
650268*
@@
@@
046050
047010
044031
042082
042030
**
**
DESCRIPTION
ISUZU RADIATOR SUPPORT SHROUD (RIGHT)
ISUZU RADIATOR SUPPORT SHROUD (RIGHT)
ISUZU RADIATOR WITH SHROUD
ISUZU RADIATOR FAN GUARD
5/16 - 18 NC X 1 GRADE 5 BOLT
5/16 FLAT WASHER
5/16 - 18 NC KEPS NUT
M8 HEXNUT
M8 X 20 GRADE 8.8 BOLT
M8 FLAT WASHER
M8 SPLIT LOCK WASHER
LEGEND: NS= Not Shown
** =Purchase locally
@@ =Contact local Isuzu Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2K
KUBOTA D905-BG
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-2L
KUBOTA D905-BG
NO
REQ’D
1
2
3
1
7
1
PART NO
650168
041015
Call Factory
DESCRIPTION
KUBOTA FAN GUARD
#8 X 5/8 HW TEKS SCREW
RADIATOR
* Use these codes to designate color needed:
LEGEND: NS= Not Shown
** =Purchase locally
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-3A
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-3B
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
REQ’D
18
32
1
12
1
8
4
2
16
1
6
1
1
1
1
4
2
4
1
1
1
1
2
2
2
1
1
1
PART NO
046010
047009
650206*
044023
650207*
045216
046110
046115
047010
650111*
044036
650113*
650266*
650277*
650565*
044033
046010
046050
650112*
650210*
650283*
650767*
041021
330481
044016
340058
640555(NS)
330037
DESCRIPTION
1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL
1/4 STAINLESS STEEL FLAT WASHER
RIGHT SIDE FRONT PANEL, 1" R
1/4 - 20 NC NYLON INSERT NUT
LEFT SIDE FRONT PANEL, 1" R
TINNERMAN FASTENER
3/8 -16 NC X 1 GRADE 5 BOLT
3/8 - 16 NC X 1 1/4 GRADE 5 BOLT
5/16 FLAT WASHER
TOWER PIVOT
3/8 - 16 NC KEPS NUT
TOWER/ROOF BRACE
ROOF PANEL, ISUZU/PERKINS 1” R
ROOF PANEL, KUBOTA 1" R W/BOX MUFFLER
ROOF PANEL, LOMBARDINI/DEUTZ 1” R
5/16-18 NC NYLON INSERT NUT
1/4-20 NC X 1 GRADE 5 BOLT
5/16-18 NC X 1 GRADE 5 BOLT
REAR TOWER SUPPORT
REAR PANEL, ISUZU 1 “R
REAR PANEL, KUBOTA/PERKINS 1" R
REAR PANEL, LOMBARDINI 1" R
#10 - 24 NC X 1/2 SCREW
GROUND ROD CLIP
#10 - 24 NC KEPS NUT
GROUND ROD
BLACK PLUG - 2.0" (PERKINS)
3" STICK-ON RED REFLECTOR CAL. SPEC.
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-4A
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
NO
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
NS
REQ’D
PART NO
2
4
2
16
2
4
20
2
2
4
660170
041026
650131
041021
650209*
041027
044019
650211
650425
041050
1
1
1
8
4
1
1
1
2
1
1
1
1
4
16
1
1
650266*
650277*
650565*
044023
041250
650210*
650283*
650767*
650132
022035
310033
650206*
650207*
044016
045110
640555 (NS)
650376
C-4B
DESCRIPTION
POSITIVE DOOR HOLDER
#10 - 24 NC X 3/4 FLAT HEAD SCREW
LOCKING T-HANDLE
#10 - 24 NC X 1/2 ROUND HEAD SCREW
DOOR 1" R, RIGHT AND LEFT
#10 - 24 NC X 3/4 ROUND HEAD SCREW
#10 - 24 NC NYLON INSERT NUT
DOOR HINGE 1" R
DOOR HINGE (UNIVERSAL)
1/4 - 20 NC X 3/4 PHILLIPS HEAD TRUSS HEAD SCREW
(STAINLESS STEEL)
ROOF PANEL. ISUZU/PERKINS 1" R
ROOF PANEL, KUBOTA 1" R W/BOX MUFFLER
ROOF PANEL, LOMBARDINI/DEUTZ 1” R
1/4 - 20 NC NYLON INSERT NUT
1/4-20 x 1/2 SLOTTED HEAD NYLON BINDER SCREW
REAR PANEL, ISUZU 1" R
REAR PANEL, KUBOTA/PERKINS 1" R
REAR PANEL, LOMBARDINI 1" R
LATCH CAM, W/SQ HD SET SCREW
CORD GRIP NUT
CORD GRIP
RIGHT SIDE FRONT PANEL, 1" R
LEFT SIDE FRONT PANEL, 1" R
#10 - 24 NC KEPS NUT
3/16 STEEL RIVETS
BLACK PLUG - 2.0” (PERKINS)
NL PRO SOUND ATTENUATION KIT
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-5A
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-5B
NO
1
2
3
4
NS
5
6
NS
7
8
9
10
11
NS
12
13
14
15
16
NS
17
18
NS
19
NS
20
REQ’D
1
2
4
2
2
2
4
4
16
1
2
1
2
4
3
1
4
1
1
1
1
3
1
1
PART NO
022025
046036
310391
610570*
650443*
044023
310124
310118
041070
043050
**
045003
650104
330458
044021
330494
041017
650105
630132A
330432
022036
433329
330459
064035
330490
330458
DESCRIPTION
3/4 2-SCREW CORD CLAMP
1/4 - 20 NC X 2 1/2 GRADE 5 BOLT
28 uFCAPACITOR
DUAL CAPACITOR MOUNTING CLAMP
DUAL CAPACITOR MOUNTING CLAMP (HPS)
1/4 - 20 NC NYLON INSERT NUT
TRANSFORMER ONLY
TRANSFORMER, CAPACITOR, AND STARTER (HPS)
1/4 - 20 NC SELF-TAPPING SCREW
1/4 INTERNAL TOOTH LOCK WASHER
#6 - 32 NC X 3/4 ROUND HEAD SCREW
¼ - 20 NC X 1 1/2 STUD
25 AMP BREAKER SWITCH
15 AMP BREAKER SWITCH (OPTIONAL)
1/4 - 20 NC KEPS NUT
1/4 - 20 NC WING NUT
#6 - 32 NC X 3/8 ROUND HEAD SCREW
15 AMP POP-OUT CIRCUIT BREAKER
120V. GFCI RECEPTACLE
RECEPTACLE COVER FOR GFCI RECEPTACLE
3/4" STEEL LOCKNUT
5/8 CAP PLUG
C.B. SWITCH, 15 AMP DP
1 1/2 X 7 GA. CAP PLUG
RECEPTACLE 240V. 15A
15 AMP BREAKER SWITCH (CABLE ELECTRIC ONLY)
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-5C
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-5D
NO
REQ’D
PART NO
1
2
3
4
5
6
7
8
9
15
7
11
1
7
6
1
4
4
044016
044014
043015
310120
043015
041030
041035
022185
041045
DESCRIPTION
#10 - 24 NC KEPS NUT
#10 - 24 NC BRASS HEX NUT
#10 INTERNAL TOOTH LOCK WASHER
BALLAST TERMINAL BOARD
#10 EXTERNAL TOOTH LOCK WASHER
#10 - 24 NC X 1 MACHINE SCREW
#10 - 24 NC X 1 1/4 MACHINE SCREW
NYLON SPACER
#10 - 24 NC X 2 1/2 MACHINE SCREW
LEGEND: NS= Not Shown
** =Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
GAUGE PANEL MANUAL WINCH
C-6A
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-6B
GAUGE PANEL MANUAL WINCH
NO
REQ’D
PART NO
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
6
2
2
1
1
1
1
2
1
920474
650219
922005
**
@@@
@@
@@@@
340014
041078
650125*
650196*
650282*
@@@
@@@@
044021
043050
043010
920475
922004
@@@@
310212
041070
650363*
2
3
4
5
6
NS
7
8
9
10
11
12
13
DESCRIPTION
IGNITION KEY (EXTRA)
IGNITION KEY (ISUZU) PAIR ROUND TYPE
IGNITION KEY (ISUZU) PAIR BLADE TYPE
IGNITION KEY (PERKINS)
GLOW PLUG LAMP
GLOW PLUG LAMP (ISUZU)
GLOW PLUG LAMP (PERKINS)
HOUR METER
1/4 - 20 NC X 1/2 ROUND HEAD SCREW
INSTRUMENT PANEL
INSTRUMENT PANEL (ISUZU)
INSTRUMENT PANEL (PERKINS)
GLOW LAMP TIMER
REGULATOR (PERKINS)
1/4 - 20 NC KEPS NUT
1/4 INTERNAL TOOTH LOCK WASHER
1/4 - 20 NC X 3/4 GRADE 5 BOLT
KEY SWITCH W/2 KEYS
KEY SWITCH W/2 KEYS (ISUZU) BLADE TYPE
KEY SWITCH W/2 KEYS (PERKINS)
5/8 CUSHION CLAMP
1/4 - 20 NC SELF-TAPPING SCREW
GAUGE PANEL COVER
LEGEND: NS= Not Shown
** = Purchase locally
@@@ = See Kubota Dealer
@@ = See Isuzu Dealer
@@@@ = See Perkins Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
GAUGE PANEL ELECTRIC WINCH
C-6C
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
GAUGE PANEL ELECTRIC WINCH
NO
REQ’D
PART NO
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
5
2
2
1
1
1
1
2
1
1
1
1
1
920474
650219
922005
**
@@@
@@
@@@@
340014
310544
352466
650125*
650196*
650282*
@@@
@@@@
041078
044021
043050
046010
920475
922004
@@@@
310212
041070
650363*
630157A
**
044016
022020
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
C-6D
DESCRIPTION
IGNITION KEY (EXTRA)
IGNITION KEY (ISUZU) PAIR ROUND TYPE
IGNITION KEY (ISUZU) PAIR BLADE TYPE
IGNITION KEY (PERKINS)
GLOW PLUG LAMP
GLOW PLUG LAMP (ISUZU)
GLOW PLUG LAMP (PERKINS)
HOUR METER
DPDT MOMENTARY CONTACT SWITCH
2 AMP CIRCUIT BREAKER
INSTRUMENT PANEL (KUBOTA)
INSTRUMENT PANEL (ISUZU)
INSTRUMENT PANEL (PERKINS)
GLOW LAMP TIMER
REGULATOR (PERKINS)
1/4 - 20 NC X 1/2 ROUND HEAD SCREW
1/4 - 20 NC KEPS NUT
1/4 INTERNAL TOOTH LOCK WASHER
1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL
KEY SWITCH W/2 KEYS
KEY SWITCH W/2 KEYS (ISUZU) BLADE TYPE
KEY SWITCH W/2 KEYS (PERKINS)
5/8 CUSHION CLAMP
1/4 - 20 NC SELF-TAPPING SCREW
GAUGE PANEL COVER
BRIDGE ASSEMBLY
#10 - 24 NC X 3/4 ROUND HEAD SCREW
#10 - 24 NC KEPS NUT
2 - SCREW ROMEX CLAMP, 3/8
LEGEND: NS= Not Shown
** = Purchase locally
@@@ = See Kubota Dealer
@@ = See Isuzu Dealer
@@@@ = See Perkins Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
GAUGE PANEL, LOMBARDINI
C-6E
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-6F
GAUGE PANEL, LOMBARDINI
NO
REQ’D
1
2
3
4
5
6
7
8
4
1
1
2
2
4
1
1
PART NO
041070
@@@@@
340014
**
043017
044021
650761
020021
DESCRIPTION
1/4 - 20 X 3/4 SELF-TAPPING SCREW
LOMBARDINI CONTROL BOX
HOUR METER
M5 X .80mm x 12mm MACHINE SCREW
#10 INTERNAL TOOTH LOCK WASHER
1/4 - 20 NC KEPS NUT
LOMBARDINI CONTROL PANEL BRACKET
#10 CUSHION CLAMP
LEGEND: NS= Not Shown
** = Purchase locally
@@@@@ = See Lombardini Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
PERKINS CONTROL PANEL
C-6G
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-6H
PERKINS CONTROL PANEL
NO
3
4
5
7
8
9
10
11
12
13
14
15
16
17
NS
REQ’D
1
8
1
3
1
1
1
1
2
1
2
1
2
1
1
PART NO
921433
044021
650446
041078
340014
650282*
650307
650363*
041070
310212
046010
650306
043050
650302
650139
DESCRIPTION
GLOW PLUG LAMP
1/4 - 20 NC KEPS NUT
REGULATOR
1/4 - 20 NC X 1/2 ROUND HEAD SCREW
HOUR METER
INSTRUMENT PANEL, PERKINS KEY
IGNITION KEY, EXTRA
GAUGE PANEL COVER
1/4 - 20 NC SELF-TAPPING SCREW
5/8 CUSHION CLAMP
1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT
KEY SWITCH W/2 KEYS (PERKINS)
1/4 INTERNAL TOOTH LOCK WASHER
AUTO SHUTDOWN TIMER
30 AMP CIRCUIT BREAKER
LEGEND: NS= Not Shown
** = Purchase locally
@@@@ = See Perkins Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-7A
FUEL TANK AND MANUAL WINCH
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-7B
FUEL TANK AND MANUAL WINCH
NO
REQ’D
PART NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
1
1
2
2
1
1
1
1
3
2
4
2
1
1
1
1
6
6
6
1
2
2
2
1
2
2
1
1
1
340027
650108
650108
044023
650470
650469
660144
650106
044021
041050
047010
044031
610531
046200
320112
044048
047007
043050
046005
630555*
046110
044036
046050
650621
045118
047100
047009
046010
650136
DESCRIPTION
FUEL FILLER CAP
POLY FUEL TANK 30 GALLON
1/4 - 20 NC X 1-3/4 GRADE 5 HEX BOLT
1/4 - 20 NC NYLON INSERT NUT
WINCH HANDLE
WINCH EXTENSION TUBE
WINCH DRIVE HUB
NYLON WINCH GUIDE
1/4 - 20 NC KEPS NUT
1/4 - 20 NC X 3/4 TRUSS HEAD PHILLIPS SCREW
5/16 FLAT WASHER
5/16 - 18 NC KEPS NUT
WINCH, PLATED
1/2 - 13 NC X 2 1/4 GRADE 5 BOLT
2-1/2 PULLEY W/BUSHING
1/2 -13 NC NYLON INSERT NUT
1/4-1 1/4 FENDER WASHER
1/4 INTERNAL TOOTH LOCK WASHER
1/4 - 20 NC X 1/2 GRADE 5 HEX BOLT
KICK-OUT SPRING
3/8 - 16 NC X 1 GRADE 5 BOLT
3/8 - 16 NC KEPS NUT
5/16 -18 NC X 1 GRADE 5 BOLT
KICKOUT SPRING PAD
1/4” RIVET
5/16 FLAT WASHER (STAINLESS)
1/4 SAE FLAT WASHER (STAINLESS)
1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT
WINCH HANDLE KIT (INCLUDES #5, 6, &7)
LEGEND: NS= Not Shown
** = Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-7C
FUEL TANK AND ELECTRIC WINCH
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
FUEL TANK AND ELECTRIC WINCH
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
17
17A
18
19
20
21
22
23
23
NS
NS
REQ’D
5
5
1
1
1
2
1
1
1
2
1
5
1
2
2
1
1
6
6
6
1
1
4
6
1
1
PART NO
046110
047010
352089*
340027
650108
047010
046200
044048
320112
044021
352056*
044036
466093
041006
044006
630157
047007
046005
043050
650431*
022019
041075
044023
081016
081005
C-7D
DESCRIPTION
3/8 - 16 NC X 1 GRADE 5 BOLT
5/16 FLAT WASHER
KICK-OUT SPRING
FUEL FILLER CAP
POLY FUEL TANK
1/4 20 NC X 1/2 CARRIAGE BOLT
1/2 - 13 NC X 2 1/4 GRADE 5 BOLT
1/2 - 13 NC NYLON INSERT NUT
2 1/2 PULLEY W/BUSHING
1/4 - 20 NC KEPS NUT
SLACK LIMIT SWITCH BRACKET
3/8 - 16 NC KEPS NUT
SLACK LIMIT SWITCH
#6 - 32 NC X 1 1/4 ROUND HEAD SCREW
#6 - 32 NC KEPS NUT
STRONG ARM ELECTRIC WINCH
EMERGENCY WINCH HANDLE
1/4 X 1 1/4 FENDER WASHER
1/4 - 20 NC X 1/2 GRADE 5 BOLT
1/4 INTERNAL TOOTH LOCK WASHER
ELECTRIC WINCH COVER
CUSHIONED CLAMP 7/8
5/16 - 18 NC SELF-TAPPING SCREW
1/4 - 20 NC NYLON INSERT NUT
1/4 FUEL HOSE 48”
NYLON RETURN FUEL HOSE, 36”
LEGEND: NS= Not Shown
** = Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8A
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8B
NO
1
2
3
4
5
6
7
8
10
11
NS
12
13
14
15
16
17
18
19
20
REQ’D
PART NO
2
6
4
3
1
3
1
1
8
1
1
1
1
1
1
4
2
9
1
2
650263
044031
042027
045038
650272
**
**
650291*
046050
022025
022036
**
920745
046055
@@@
046134
650114*
042038
046050
047009
DESCRIPTION
AIR CLEANER BAND
5/16 -18 NC KEPS NUT
8mm X 20mm X 1.25 GRADE 10.9 BOLT
HOSE CLAMP #32
AIR INTAKE HOSE
5/16 INTERNAL TOOTH LOCK WASHER
1/4 FLAT WASHER
AIR CLEANER MOUNT BRACKET, PRO
5/16-18 NC X 1”GRADE 5 BOLT
2-SCREW ROMEX CONNECTOR 3/4
3/4" STEEL LOCKNUT
CAP PLUG
KUBOTA FUEL FILTER
5/16 - 18 NC X 1 1/4 GRADE 5 BOLT
FUEL FILTER MOUNTING PLATE
3/8 - 16 NC X 2 1/2 GRADE 5 BOLT
ENGINE MOUNT
10mm X 20mm X 1.25 GRADE 8.8 BOLT
5/16 - 18 NC X 1 GRADE 5 BOLT
5/16 FLAT WASHER
LEGEND: NS= Not Shown
** = Purchase locally
@@@ = See local Kubota Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8A CONT.
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8B CONT.
NO
21
22
23
24
25
26
27
28
29
30
31
32
NS
33
34
36
38
39
40
41
42
43
44
45
NS
NS
NS
NS
NS
NS
REQ’D
PART NO
1
8
4
2
4
1
2
1
1
8
4
4
1
1
1
2
1
1
4
8
8
1
1
1
1
1
1
1
1
1
340105
650274
650259
046110
044038
330463
043065
650265*
920743
047016
043055
042018
651232
352139
650262
043055
046105
352135
650260
044033
047010
650289
650296
713086
340036
081018
081018
650154
650153
650171
DESCRIPTION
GROUND STRAP
ENGINE MOUNT WASHER
RUBBER ENGINE MOUNT
3/8 - 16 NC X 1” GRADE 5 BOLT
3/8 -16 NC NYLON INSERT NUT
RUBBER GROMMET
3/8 SPLIT LOCK WASHER
GENERATOR MOUNT
KUBOTA OIL FILTER
3/8 FLAT WASHER S.A.E.
5/16 SPLIT LOCK WASHER
6mm X 10mm X 1.0 GRADE 8.8 BOLT
MUFFLER
KUBOTA BOX MUFFLER KIT
AIR CLEANER
5/16 SPLIT LOCK WASHER
3/8 - 16 NC X 3/4 GRADE 5 BOLT
EXHAUST MANIFOLD MUFFLER GASKET
SNUBBING WASHER
5/16-18 NC NYLON INSERT NUT
5/16 FLAT WASHER
BOX MUFFLER EXHAUST PIPE
BOX MUFFLER EXHAUST PIPE BRACKET
1-3/8 MUFFLER CLAMP (for box muffler ex. pipe)
REPLACEMENT AIR FILTER
5/16 FUEL LINE 14"
5/16 FUEL LINE 10"
UPPER RADIATOR HOSE
LOWER RADIATOR HOSE
ENGINE MOUNT SPACER_
LEGEND: NS= Not Shown
** = Purchase locally
@@@ = See local Kubota Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8C
ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8D
ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY
NO
1
REQ’D
3
1
1
1
1
1
4
1
5
1
6
7
2
2
2
4
1
10
8
8
2
4
4
4
4
4
8
8
2
NS
NS
NS
2
8
9
10
11
12
13
14
15
16
17
18
19
20
PART NO
650191
352160
650264
@@@@
650263
@@@@
650262
@@@@
**
@@@@
045038
650114*
650281*
650259
650265*
046050
047010
044033
044031
046134
047015
650274
650260
044038
042038
**
047016
650220
650221
920878
DESCRIPTION
ISUZU 3LB1
PERKINS 103.10
AIR CLEANER BRACKET
AIR CLEANER BRACKET
AIR CLEANER POLYMER BAND CLAMP
AIR CLEANER POLYMER BAND CLAMP
AIR CLEANER ASSEMBLY
AIR CLEANER ASSEMBLY
AIR CLEANER INLET HOSE
AIR CLEANER INLET HOSE
#32 HOSE CLAMP
ENGINE MOUNT FOOT (ISUZU)
ENGINE MOUNT FOOT (PERKINS)
RUBBER ENGINE MOUNT
GENERATOR MOUNT PLATE
5/16 -18 NC X 1 GRADE 5 BOLT
5/16 FLAT WASHER
5/16-18 NC NYLON INSERT NUT
5/16-18 NC KEPS NUT
3/8-16 NC X 2.5 GRADE 8 BOLT
3/8 FLAT WASHER
ENGINE MOUNT WASHER
SNUBBING WASHER
3/8 -16 NC NYLON INSERT NUT
M 10 X 20 GRADE 8.8 BOLT
M12-1.25 X 20 GRADE 10.9 BOLT (PERKINS)
3/8FLAT WASHER S.A.E.
ISUZU FUEL FILTER
ISUZU OIL FILTER
ISUZU GLOW PLUGS
LEGEND: NS= Not Shown
** = Purchase locally
@@@ = See local Isuzu Dealer
@@@@ = See local Perkins Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8C CONT.
ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8D CONT.
ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY
NO
REQ’D
PART NO
21
22
23
24
25
26
27
28
2
2
2
7
1
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
046110
043065
042027
043055
042082
081016
081005
@@@
@@@@
@@@
@@@@
@@@
@@@@
650225
651232
@@@
29
30
31
32
DESCRIPTION
3/8 - 16 NC X 1” GRADE 5 BOLT
3/8 SPLIT LOCK WASHER
M8 X 16 GRADE 5 BOLT
5/16 SPLIT LOCK WASHER
M8 HEX NUT
1/4 FUEL HOSE
NYLON RETURN FUEL HOSE
UPPER RADIATOR HOSE
UPPER RADIATOR HOSE
LOWER RADIATOR HOSE
LOWER RADIATOR HOSE
EXHAUST MANIFOLD MUFFLER GASKET
EXHAUST MANIFOLD MUFFLER GASKET
MUFFLER PRO - ISUZU
MUFFLER - CAT
M8 X 25 GRADE 8.8 BOLT
LEGEND: NS= Not Shown
** = Purchase locally
@@@ = See local Isuzu Dealer
@@@@ = See local Perkins Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8E
LOMBARDINI ENGINE/GENERATOR ASSEMBLY
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8F
LOMBARDINI ENGINE/GENERATOR ASSEMBLY
NO
REQ’D
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
NS
NS
NS
NS
4
4
1
8
4
8
4
4
4
8
2
2
2
1
6
2
4
4
1
1
1
1
1
1
PART NO
650592
100350
046134
047015
650563*
046050
650259
044033
650260
044038
650274
047010
046095
043065
047008
650562-01
042018
650567-01
044021
041078
650830
651236
081016
081005
**
**
DESCRIPTION
GENERATOR 6 KW PG
GENERATOR 7.5 KW MECC ALTE
3/8-16 NC X 2.5 GRADE 8 BOLT
3/8 FLAT WASHER
GENERATOR MOUNT PLATE
5/16 -18 NC X 1 GRADE 5 BOLT
RUBBER ENGINE MOUNT
5/16-18 NC NYLON INSERT NUT
SNUBBING WASHER
3/8 -16 NC NYLON INSERT NUT
ENGINE MOUNT WASHER
5/16 FLAT WASHER
3/8-16 NC X 1/2 GRADE 5 BOLT
3/8 SPLIT LOCK WASHER
1/4 SS FLAT WASHER
ENGINE MOUNT BRACKET
6MM X 16MM X 1.0 GRADE 8.8 BOLT
RADIATOR SHROUD
1/4-20 NC KEPS NUT
1/4-20 X 1/2 TRUSS HEAD BOLT
LOMBARDINI LDW 903 ENGINE
MUFFLER
FUEL LINE 48”
NYLON RETURN LINE 55”
GAUGE PANEL ENGINE HARNESS ASSEMBLY
ENGINE WIRING HARNESS ONLY
LEGEND: NS= Not Shown
** = Purchase locally
@@@@@ = See local Lombardini Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8G
3011C CAT ENGINE/GENERATOR ASSEMBLY WITH REAR EXHAUST EXIT
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8H
3011C CAT ENGINE/GENERATOR ASSEMBLY WITH REAR EXHAUST EXIT
NO
REQ’D
PART NO
1
1
1
1
1
1
1
4
8
4
1
1
2
2
2
1
1
352097
352236
651164
650851
650850
651166
042027
043055
042031
340112-2
340112-3
043065
044035
**
**
651012
651012
640144
2
3
4
5
6
7
8
9
10
11
12
13
14
DESCRIPTION
CAT 3011C D RATE 6KW ENGINE
CAT 3011C NON-D RATE 8KW ENGINE
CAT 3011C REAR PANEL, PRO, REAR EXHAUST
CAT 3011C MUFFLER BY STANLEY
STANLEY MUFFLER, 10” TAILPIPE
MUFFLER BRACKET, CAT 3011C, REAR EXHAUST
8MM X 16MM X 1.25 HEX BOLT
5/16” PLATED SPLIT LOCK WASHERS
8MM X 25MM X 1.25 HEX BOLT
1-1/2” MUFFLER CLAMP BASE
1-1/2” MUFFLER CLAMP BOLT
3/8” SPLIT LOCK WASHER
3/8-16 PLATED HEX NUT
CAT 3011C MUFFLER GASKET
CAT 3011C MUFFLER SPACER
GENERATOR MOUNT
6KW BALDOR GENERATOR
8KW BALDOR GENERATOR
LEGEND: NS= Not Shown
** = Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8I
NIGHT-LITE PRO SERIES
TRAILER ASSEMBLY PARTS AND ACCESSORIES
C-8J
NO
REQ’D
PART NO
1
2
3
4
1
2
4
2
650398*
046230
047025
044048
DESCRIPTION
REMOVABLE TONGUE WELDMENT
1/2-13 NC x 5" GRADE 8 BOLT
½ FLAT WASHER
1/2-13 NC NYLON INSERT HEX NUT
LEGEND: NS= Not Shown
** = Purchase locally
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
THIS PAGE LEFT BLANK INTENTIONALLY
NIGHT-LITE PRO SERIES
DECALS
D-1A
REQ’D
PART NO
1
1
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
090165
090177
090034
090166
090284
090276
090159
090160
090139
090133
090158
090084
090278
090288
090224
090225
090163
090226
090002
090164
090240
650158
090256
090269
090262
090205
090232
090179
090309
2
1
1
1
1
1
1
DESCRIPTION
DECAL - DANGER ELECTRIC SHOCK
ALIGNMENT ARROW
DECAL - DIESEL
DECAL - WARNING OVERHEAD HAZARD
STRIPE DECAL SET
NIGHT-LITE DECAL
DECAL - WARNING COMBUSTIBLE GAS
DECAL - WARNING EXCESS TOW
DECAL - LATCH/UNLATCH
DECAL - GROUND LUG
DECAL - WARNING OPERATOR’S MANUAL
DECAL - WARNING SHUT OFF LIGHTS
PRO SERIES DECAL
STARTING ENGINE, ISUZU & PERKINS
STARTING ENGINE, KUBOTA
PRO PICTORIAL INSTRUCTION
DECAL - DANGER ELECTIC SHOCK
DECAL -WARNING ROLL OVER PROTECTION
DECAL - DANGER HIGH VOLTAGE
DECAL - WARNING NON-VERTICAL
DECAL - WARNING FOLD OUTRIGGERS
DECAL SET COMPLETE - PRO
LARGE ALLMAND DOOR DECAL
SMALL ALLMAND REAR PANEL DECAL
ELECTRIC WINCH PICTORIAL OPERATOR (Elec. Winch Only)
DECAL - RED LATCH (Elec. Winch Only)
DECAL -ELECTRIC WINCH WARNING (Elec. Winch Only)
DECAL PROPOSITION 65 DIESEL
DECAL-SPRING LATCH RELEASE
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
KUBOTA D905-BG
E-1A
NIGHT-LITE PRO SERIES
KUBOTA D905-BG
E-1B
REF#
PART NO
DESCRIPTION
6
7
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
Call Factory
340302
650262
650114*
650114*
920743
340301
340304
640146
640157
650592
640167
920745
081016
081005
@@@
650134
NS
NS
650265*
650290
RADIATOR
HIGH TEMPERATURE SWITCH
AIR CLEANER
ENGINE MOUNT BRACE (LEFT)
ENGINE MOUNT BRACE (RIGHT)
KUBOTA OIL FILTER
OIL PRESSURE SWITCH
KUBOTA D905-BG ENGINE
MARATHON 6KW GENERATOR
MARATHON 8KW GENERATOR (KUBOTA 1105 ONLY)
POWRGARD 6KW GENERATOR
LEROY SUMER 50HZ 6KW GENERATOR
FUEL FILTER
1/4 FUEL LINE 48"
NYLON RETURN LINE 55"
MUFFLER KIT
ENGINE WIRING HARNESS
(SEE WIRE SCHEMATIC F-1A)
GENERATOR MOUNT PLATE
REPLACEMENT AIR FILTER ELEMENT
1
2
4
5
FOR ENGINE PARTS NOT SHOWN, SEE KUBOTA D905 PARTS LIST. FOR GENERATOR
PARTS NOT SHOWN, SEE MANUFACTURER’S LIST OR CALL 800-562-1373 FOR ASSISTANCE.
LEGEND: NS= Not Shown
** = Purchase locally
@@@ = See local Kubota Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ISUZU 3LB1
E-2A
NIGHT-LITE PRO SERIES
ISUZU 3LB1
E-2B
REF#
NS
1
NS
NS
NS
NS
NS
PART NO
2
NS
NS
3
4
NS
NS
NS
NS
NS
NS
NS
@@
@@
650261
650262
650263
@@
650114*
650114*
650221
650220
920878
@@
650191
640146
650592
640167
081016
081005
650225
650240
NS
650265*
DESCRIPTION
RADIATOR
HIGH TEMPERATURE SWITCH
ISUZU AIR CLEANER BRACKET
ISUZU AIR CLEANER
ISUZU AIR CLEANER BAND CLAMP
ISUZU AIR CLEANERAIR INLET HOSE
ENGINE MOUNT BRACE (LEFT)
ENGINE MOUNT BRACE (RIGHT)
ISUZU OIL FILTER
ISUZU FUEL FILTER
ISUZU GLOW PLUG
OIL PRESSURE SWITCH
ISUZU 3LB1 ENGINE (INCLUDES RAD. AND SHROUD)
MARATHON 6KW GENERATOR
POWRGARD 6KW GENERATOR
LEROY SUMER 50HZ 6KW GENERATOR
1/4 FUEL LINE 48"
NYLON RETURN LINE 55"
MUFFLER KIT
ISUZU ENGINE WIRING HARNESS
(SEE WIRE SCHEMATIC F-2A)
GENERATOR MOUNT PLATE (ISUZU-NEW MOUNTS)
FOR ENGINE PARTS NOT SHOWN, SEE ISUZU 3LB1 PARTS LIST. FOR GENERATOR
PARTS NOT SHOWN, SEE MANUFACTURES LIST OR CALL 800-562-1373 FOR ASSISTANCE.
LEGEND: NS= Not Shown
** = Purchase locally
@@ = See local Isuzu Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
PERKINS 103.10
E-3A
NIGHT-LITE PRO SERIES
PERKINS 103.10
E-3B
NO
REQ’D
PART NO
1
2
3
4
NS
5
6
7
8
9
10
11
12
NS
13
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
8
8
8
1
650284*
@@@@
@@@@
@@@@
650303
@@@@
650281*
@@@@
@@@@
@@@@
@@@@
@@@@
650304
650305
352160
640146
640157
650592
640167
650762
650279*
650280*
030052
**
**
**
**
650285
46"
26"
1
1
4
4
1
081005
081016
650278
@@@@
**
**
650265*
NS
NS
NS
NS
NS
NS
NS
DESCRIPTION
RADIATOR SHROUD, PERKINS, SIDE
HIGH TEMPERATURE SWITCH
AIR CLEANER DUST CAP
AIR CLEANER
AIR FILTER ELEMENT
AIR CLEANER, MOUNTING BRACKET
ENGINE MOUNT BRACKET
AIR INTAKE HOSE
OIL PRESSURE SWITCH
UPPER RADIATOR HOSE
RADIATOR
OIL DRAIN PLUG
OIL FILTER
FUEL FILTER
PERKINS 103.10 ENGINE
MARATHON 6KW GENERATOR
MARATHON 8KW GENERATOR
POWRGARD 6KW GENERATOR
LEROY SUMER 50HZ 6KW GENERATOR
LOMBARDINI LDW 903 ENGINE
RADIATOR SHROUD, PERKINS, UPPER
RADIATOR SHROUD, PERKINS, LOWER
TRIM LOCK WITH RUBBER SEAL
M 12-1.25 X 20 GRADE 10.9 BOLT
1/4-20 X.75 STAINLESS STEEL PAN SCREWS
1/4 SPLIT LOCK WASHER
1/4-20 NYLON INSERT NUT
PERKINS ENGINE WIRING HARNESS
(SEE WIRING SCHEMATIC F-3A)
NYLON RETURN LINE
1/4 FUEL LINE
GT MUFFLER
MUFFLER GASKET
M8-1.25 X 20 GRADE 8.8 BOLT
3/8 SPLIT LOCK WASHER
MARATHON GENERATOR MOUNT PLATE
LEGEND: NS= Not Shown
** = Purchase locally
@@@@ = See local Perkins Dealer
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
LOMBARDINI LDW 1003
E-3C
NIGHT-LITE PRO SERIES
LOMBARDINI LDW 1003
E-3D
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
REQ’D
1
2
1
1
1
1
1
8
8
6
4
4
2
2
5
2
1
1
1
2
2
2
PART NO
650830
100350
650562
100353
100352
100354
100614
046120
043065
046041
046115
044038
047015
046055
047010
044033
651236
046045
043055
**
**
**
LEGEND: NS= Not Shown
** = Purchase locally
DESCRIPTION
LOMBARDINI LDW 1003 ENGINE
MECC ALTE LT3-100 GENERATOR
NLPRO DEUTZ ENGINE MOUNT
COMBO MOUNT BACK PIECE
COMBO MOUNT BOTTOM PIECE
MECC ALTE GENERATOR MOUNT BACK PLATE
5/16 -18 T SLOT NUT
3/8-16 X 1 1/2 HEX HEAD BOLT
3/8" SPLIT LOCK WASHER
5/16-18x1/2" 12 PT FLANGE HEAD BOLT
3/8-16 x 1 1/4 GR 5 HEX BOLT
3/8 - 16 NYLON INSERT NUT
3/8" FLAT WASHER
5/16-18 x 1 1/4" GR 5 HEX BOLT
5/16" PLATED FLAT WASHER
5/16 - 18 NYLON INSERT NUT
LOMB MUFFLER
5/16 - 18 x 3/4" GR 5 HEX BOLT
5/16" PLATED SPLIT LOCK WASHER
M8 x 1.25mm FLANGE NUT
M12 - 1.75 X 25MM HEX BOLT
12MM WASHER
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
F-1A
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
KUBOTA SCHEMATIC (After Sept 1, 2004)
KUBOTA SCHEMATIC (Before Sept 1, 2004)
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-1B
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-2A
ISUZU 3LB, 3LD ENGINE/GENERATOR WIRING HARNESS
PART#
DESCRIPTION
650240
ISUZU ENGINE WIRING HARNESS
NOTE: ALL CONNECTORS VIEWED FROM THE REAR
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-2B
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
CAT/PERKINS 103.10 ENGINE
F-3A
PART#
DESCRIPTION
650285
CAT/PERKINS ENGINE WIRING HARNESS
CAT/PERKINS ENGINE WIRING HARNESS, KEYLESS OPTION
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-3B
MARATHON GENERATOR SCHEMATIC
POW’R GARD GENERATOR SCHEMATIC
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-4A
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-4B
120V GFCI AND 240V RECEPTACLE WIRING
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-5A
MULTI-TAP 50 HZ TRANSFORMER WIRING DIAGRAM
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-5B
DUTTON-LAINSON STRONG ARM WINCH SCHEMATIC
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-6A
LOMBARDINI LDW 903 WIRING DIAGRAM
NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS
F-6B
LOMBARDINI LDW 903 WIRING DIAGRAM
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES
ALLMAND LIGHTING SYSTEMS
LIMITED WARRANTY
UNITED STATES and U.S. TERRITORIES
THIS WARRANTY IS IN LIEU OFALL OTHER WARRANTIES, EXPRESSED OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR PURPOSE, AND ANY EXCEPTIONS ARE DESCRIBED IN THE
PUBLISHED LIMITED WARRANTYADDENDUM,AVAILABLE UPON REQUEST.
COMPONENTS, SUB-ASSEMBLIES, AND DEVICES MANUFACTURED BY OTHER MANUFACTURERS ARE NOT
COVERED BY THIS WARRANTY. ALLWARRANTY INFORMATION FROM SUCH OTHER MANUFACTURERS IS
PROVIDED WITHIN OR ACCOMPANY THESE GOODS.
Subject to the foregoing, the manufacturer, Allmand Bros. Inc., hereby warrants all equipment manufactured by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of (1) year
after delivery to the original purchaser. Additionally, Allmand Bros. Inc. hereby warrants all replacement parts
supplied by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of 90 days
after date of invoice. Delivery shall be deemed for the purposes of this warranty to have occurred no later
than five days following the date of sale agreement or invoice unless the purchase agreement or invoice
specifically states a later delivery date in which case such delivery date shall control. The original purchaser
shall be deemed to be a person who places the goods or products in actual use, and any person holding such
goods solely for wholesale or retail sale purposes shall not constitute an original purchaser. PROVIDED, any
leasing of these goods or other use beyond normal demonstration of same shall be deemed to be in use by an
original purchaser and all warranty periods shall commence at the time of such use. During the warranty
period any defective goods or parts hereof shall be repaired or replaced at manufacturer’s discretion. In the
event it is necessary to return such goods or parts to the factory, all transportation charges shall be prepaid.
The manufacturer shall in no event pay mileage expenses, but will warrant outbound ground freight.
The obligations of the manufacturer is solely to repair or replace defective goods or parts or to refund
the cost of the same if it is determined by the manufacturer that repair or replacement will not return the goods
to proper working order or utility. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE AND
MANUFACTURER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES. THE OBLIGATIONS OF THE MANUFACTURER HEREUNDER SHALL IN
NO WAY EXCEED THE PRICE OF THE EQUIPMENT OR PART UPON WHICH SUCH LIABILITY IS BASED.
The warranty shall not extend to tires, lamps, batteries, or parts that have been altered, changed,
damaged, or improperly installed, repaired, operated or maintained. Provided, this exclusion shall not apply to
installations, repairs or other work done at the manufacturer’s plant or under direct manufacturer’s supervision. The Operator’s Manual, to the extent covered therein, is deemed to set forth the proper procedures for
operation, repair, installation, and maintenance of these goods.
No representative, dealer or distributor of the company is authorized to make any changes or
exceptions to this warranty unless expressly authorized in writing from the manufacturer. All warranty
claims must be filed within forty-five (45) days of the failure.
ALLMAND BROS. INC., 1502 W 4TH AVENUE, P.O.BOX 888, HOLDREGE, NE 68949 (308) 995-4495
NIGHT-LITE PRO SERIES
* Use these codes to designate color needed:
01-White
02-Gloss Black
03-Gray
04-Allmand Yellow
05-Orange
15-Plated
06-Allmand Gold
09-Flat Black
10-High temp Black
11-Red
12-Chrome
NIGHT-LITE PRO SERIES