Data sheet
H-2000-2376-02-A
FS sockets for Ø25 mm probes
www.renishaw.com/mp250
Styli combinations
Sockets
LP2 probe
MP250 probe
FS1/FS10
FS2/FS20
Extensions
FS sockets
Extension bars
• The FS10 and FS20 sockets are used for holding the
MP250 probes.
• Features with restricted access can be reached by adding
an LPE extension bar between the probe and FS socket.
• The FS1, FS2 and FS3 sockets are used for holding the LP2
and LP2H probes.
• LPE extension bars are available in three different lengths.
LPE1 (50 mm long), LPE2 (100 mm long) and LPE3
(150 mm long).
• Specific versions can be customised to meet with your
individual requirements.
Data sheet
FS sockets for Ø25 mm probes
FS1, FS2, FS10 and FS20 sockets
Dimensions given in mm (in)
Ø24.75 (0.975)
Green
Outer spring pin
Screened cable
for MP250 only
4.5 (0.18)
M16 x 1
thread
FS1/FS10
8 (0.31)
13.8 (0.54)
8.2 (0.32)
8.0 (0.31)
Side cable exit
Ø6 (0.24) min.
0.3 (0.01) x 45°
22.03 (0.87)
21.98 (0.86)
9.4 (0.37) 9.4 (0.37)
9.2 (0.36) 9.2 (0.36)
Inner spring pin
22.5 (0.88)
Two adjusting screws
(2.5 mm AF
hexagon socket)
providing
±4° angular
adjustment.
M16 x 1
thread
Pin connection
Blue
0.8 (32)
30°
TOP VIEW
20.65 (0.812)
20.55 (0.809)
Ø26 (Ø1.02)
Cover for FS1, FS2, FS10
and FS20 to protect against
ingress of chips or coolant
when the probe is removed.
Wire colour
SIDE VIEW
20 (0.78)
Hole depth (min)
2 holes M5 x 0.8-6H for adjusting screws.
30 (1.18) minimum
Ø0.1 (0.004)
Machining details for mounting hole (FS1/FS10)
2 (0.7)
M22 x 1 thread
23.0 (0.905)
22.9 (0.901)
M16 x 1
thread
60°
22.5 (0.88)
8 (0.31)
Side cable exit
Ø6 (0.24) min.
M22 x 1-6H
thread
4.5 (0.18)
21.0 (0.82)
20.8 (0.81)
Ø24.75 (0.975)
Screened cable
for MP250 only
FS2/FS20
Machining details for mounting hole (FS2/FS20)
20 (0.78)
Hole depth (min)
30 (1.18) minimum
FS3 socket for LP2 and LP2H probes
Dimensions given in mm (in)
2 core cable 4.5 m
(14.76 ft) long
Ø25 (Ø0.98)
Ø45 (Ø1.77)
37.5 (1.47)
±4°
Blue
Green
Ball pivot
2 balls Ø6.0 (0.24)
2 socket cap head screws
M5 x 0.8-20 long
(4 mm AF hexagon socket)
M16 x 1.0
thread
Machining required
on face A
1.7 (0.06) A
1.5 (0.05)
Z
12 (0.47)
minimum
Ball Ø6.0 (0.24)
X
90°
17.5
(0.68)
35 (1.37)
Installation
Ø23.6 (0.929)
Ø23.5 (0.925)
Depth 10 (0.39)
minimum
2 holes
M5 x 0.8-6H
X
Z
Machining details for mounting hole (FS3)
1.7 (0.06)
1.5 (0.05)
Section XX
39 (1.53)
1.5 (0.05) x 15°
chamfer
Section ZZ
Renishaw plc
New Mills, Wotton-under-Edge,
Gloucestershire, GL12 8JR
United Kingdom
T +44 (0)1453 524524
F +44 (0)1453 524901
E uk@renishaw.com
www.renishaw.com
Extension bars for LP2, LP2H and
MP250 probes
Dimensions given in mm (in)
50 (1.96)
M16 x 1 thread
M16 x 1 thread
)
100 (3.94
M16 x 1 thread
M16 x 1 thread
)
150 (5.90
M16 x 1 thread
M16 x 1 thread
Parts list – please quote the part number when ordering equipment
Type
Part no.
Description
FS10 socket for MP250
probe
A-5500-1710
FS10 adjustable socket (angular rotation) with 10 m of screened
cable.
FS20 socket for MP250
probe
A-5500-1810
FS20 fixed socket (rigid rotation) with 10 m of screened cable.
FS1 socket for LP2 or LP2H
probes
A-2063-6697
FS1 adjustable socket (angular rotation) with 2 wires 0.5 m.
FS2 socket for LP2 or LP2H
probes
A-2063-5431
FS2 fixed socket (rigid mounting) with 2 wires 0.5 m.
FS3 socket for LP2 or LP2H
probes
A-2063-5308
FS3 single axis adjustable holder (pivots) with 2 wires 0.5 m.
LPE1
A-2063-7001
LPE1 extension bar - 50 mm long.
LPE2
A-2063-7002
LPE2 extension bar - 100 mm long.
LPE3
A-2063-7003
LPE3 extension bar - 150 mm long.
Publications. These can be downloaded from our web site at www.renishaw.com
Styli
H-1000-3200
Technical specification: Styli and accessories.
Adaptors, extensions and
holders
H-2000-2120
Data sheet: Adaptors, extensions and holders
For worldwide contact details, please visit our
main web site at www.renishaw.com/contact
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT
AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT.
RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.
© 2009-2011 Renishaw plc. All rights reserved.
Issued 04.11
*H-2000-2376-02*
Part no. H-2000-2376-02-A