ChemoSHIELD, CS500 - The Baker Company

advertisement
1
2
3
4
5
6
7
8
DESCRIPTION
REV
CONSTRUCTION
115 VAC, 15 AMP, 60 HZ, SINGLE PHASE
(9 FOOT[2.7M] LONG POWER CORD
W/NEMA 5-15 PLUG)
11 7/16"
291.1MM
A
B
C
MATERIALS:
WORK & PASS THROUGH CHAMBERS - 16 GA[1.5MM] 316 SS
WORKSURFACES - 16 GA[1.5MM] 316 SS
INLET PLENUM/EXTERIOR PANELS - COLD ROLLED STEEL, PAINTED BAKER PERMA WHITE
EXHAUST PLENUM/TRANSITION - COLD ROLLED STEEL, PAINTED BAKER PERMA WHITE
6 9/16"
166.1MM
ORIGINAL RELEASE
CORRECTION - 1.8"W.C.[448.4 Pa]
WAS 1.5"W.C.[373.5 Pa]
DATE
DRN
APP-BY
-
-
-
-
-
-
-
-
10/27/08 C.W.Q., JR.
AVD
11/20/13
ADDED SHIPPING HEIGHT
APP-DATE
DOORS
FRAME - 16 GA[1.5MM] 316 SS
VIEWSCREEN - 3/8"[9.5MM] THICK POLYCARBONATE
ARMPORT - 316L SS
D
D
HEPA FILTERS
DOWNFLOW - 18"[457.2MM] X 35"[889MM] X 3"[76.2MM] (WORK CHAMBER)
18"[457.2MM] X 20"[508MM] X 3"[76.2MM] (PASS-THROUGH CHAMBER)
EXHAUST - 13"[330.2MM] X 9"[228.6MM] X 6"[152.4MM](TWO IN WORK CHAMBER)
13"[330.2MM] X 11 1/2"[292.1MM] X 6"[152.4MM] (PASS-THROUGH CHAMBER)
ELECTRICAL: 115 VAC, 15 AMP, 60 HZ, SINGLE PHASE(9 FOOT LONG POWER CORD W/NEMA 5-15 PLUG)
FEATURES
1. NEGATIVE PRESSURE CHAMBERS - PASS THROUGH CHAMBER IS SLIGHTLY
MORE NEGATIVE THAN THE WORK CHAMBER IN THE STANDARD CONFIGURATION
2 BAG-OUT EXHAUST FILTERS
3. MECHANICAL INTERLOCK BETWEEN PASS-THROUGH & INTER-CHAMBER DOORS.
4. 10 DEGREE SLOPED VIEWSCREEN.
5. ADJUSTABLE LEGS FOR STANDING OR SITTING.
6. ADJUSTABLE IV BAR IN WORK CHAMBER
7. FLAT WORKSURFACES WITH RADIUSED CORNERS.
8. MAG. GAUGES FOR MONITORING NEGATIVE PRESSURE IN CHAMBERS.
9. EXHAUST AIRFLOW MONITOR WITH VISUAL AND AUDIBLE ALARM.
10. GFCI PROTECTED DUPLEX OUTLETS IN REAR WALL OF WORK CHAMBER.
11. AUXILIARY SWITCH FOR CONNECTING TO BUILDING EXHAUST BLOWER. (OPTIONAL)
12. AUTOLIFT HYDRAULIC LIFT SYSTEM. (OPTIONAL)
13. SEISMIC RESTRAINTS - BOTH FLOOR AND WALL(OPTIONAL)
(--EXCEPT WITH THE AUTOLIFT SYSTEM--)
SEE NOTE# 3
AFM ALARM
EXHAUST COLLAR, O8"[203.2MM]
C
C
DUPLEX ON/OFF SWITCH
7 5/16"
185MM
LIGHT ON/OFF SWITCH
DOWNFLOW FILTER DIFFUSER
EXHAUST PROBE PORT
IV BAR, O1"
10 POSITION- FRONT TO BACK
ELECTRICAL PANEL
LIGHT CANOPY
LIGHT CANOPY
10v SLOPED HINGED
WORK CHAMBER
VIEWSCREEN
OVAL ARMPORT
NOTES
22"
558.4MM
B
1. TUBULAR LEGS SHOWN IN FULL EXTENDED POSITION
THEY CAN BE RETRACTED 6"[152.4MM]
25 3/8"
643.9MM
2. LEG LEVELERS SHOWN IN THE FULL RETRACTED POSITION:
THEY CAN BE EXTENDED UP TO 3"[76.2MM].
L.H. HINGED
PASS THROUGH
DOOR
90 15/16"
2310.5MM
SEE NOTE#1 & 2
79"
2007.3MM
SHIPPING
HEIGHT
B
3. BUILDING EXHAUST REQUIREMENT:
310 CFM[146.3 L/SEC] @ 1.8"W.C.[448.4 Pa]
(2) OVAL ARMPORTS
4. CABINET WEIGHT = 570 LBS [258.55 Kg]
WORK
SURFACE
ELEVATION
KEY LOCK LATCH
2 PLCS
4 1/16"
103.1MM
B
5. CABINET REQUIRES 15"[381MM] ON THE LEFT SIDE FOR THE
PASS-THROUGH DOOR SWING AND 28" AT THE FRONT FOR THE
WORK CHAMBER VIEWSCREEN SWING.
INTERIOR DIMENSIONS:(NOMINAL)
WORK CHAMBER - 31"[787.4MM]W X 24"[609.6MM]F-B X 25 3/8"[643.9MM]H
INTER-CHAMBER DOOR
BALANCING
DAMPER
PASS THROUGH CHAMBER - 17.5"[444.5MM] X 24"[609.6MM] F-B X 25 3/8"[643.9MM]H
37 15/16"
963.5MM
SEE NOTE#1 & 2
42"
1066.6MM
SEE NOTES 1 & 2
6 11/16"
170.6MM
A
UNLESS OTHERWISE SPECIFIED
DO NOT SCALE DRAW ING
REMOVE ALL BURRS AND SHARP EDGES
U.S. CUSTOMARY TOLERANCES: (INCHES)
DECIMALS
±.02
±.06
.XX
±.01
±.03
±.005
±.010
.XXX
FINISH:
23 1/2"
597.2MM
60"
1524MM
1
2
7 13/16"
198.9MM
3
4
5
ANGULAR
±0'-30° (.5°)
125
PROJECTION
SIZE
DATE
DRAWN
CHECKED
11/20/2013
DATE
avandintel 11/20/2013
6
7
161 Gatehouse Rd., Sanford, Maine 04073 USA
“Creating Immaculate Atmospheres”
ChemoSHIELD, CS500
Lefthand Pass Through
THIRD ANGLE
NO 4
THE BAKER COMPANY
TITLE
±1/32
avandintel
35 11/16"
907MM
SHEET METAL
.X
FRACTIONS
49 3/4"
1263.1MM
MACHINED
A
THIS DRAWING AND ITS CONTENTS ARE THE
PROPERTY OF THE BAKER COMPANY. THE
INFORMATION CONTAINED HERE ON MAY NOT BE
USED OR COPIED IN ANY MANNER W ITHOUT THE
WRITTEN PERMISSION OF THE BAKER COMPANY.
REV
DWG NO
D
C
BGA-CS500
SCALE
SQUARE FOOTAGE
SHEET
1 OF 2
-
8
1
2
3
4
5
6
7
8
DESCRIPTION
REV
DATE
DRN
APP-BY
APP-DATE
D
D
GFCI PROTECTED DUPLEX OUTLETS
WITH WEATHERPROOF COVERS.
10 AMPS MAX TOTAL / ALL OUTLETS
C
C
12 1/2"
317.5MM
WORKSURFACE
4 1/16"
103.1MM
A
5 1/16"
127.8MM
INTERIOR WALL
2 9/16"
65.1MM
DETAIL A
B
B
WORK CHAMBER VIEWSCREEN NOT SHOWN
LEFT SIDE VIEW
A
UNLESS OTHERWISE SPECIFIED
DO NOT SCALE DRAW ING
REMOVE ALL BURRS AND SHARP EDGES
U.S. CUSTOMARY TOLERANCES: (INCHES)
DECIMALS
MACHINED
SHEET METAL
.X
±.02
±.06
.XX
±.01
±.03
±.005
±.010
.XXX
FRACTIONS
FINISH:
ANGULAR
±0'-30° (.5°)
A
THIS DRAWING AND ITS CONTENTS ARE THE
PROPERTY OF THE BAKER COMPANY. THE
INFORMATION CONTAINED HERE ON MAY NOT BE
USED OR COPIED IN ANY MANNER W ITHOUT THE
WRITTEN PERMISSION OF THE BAKER COMPANY.
ChemoSHIELD, CS500
Lefthand Pass Through
THIRD ANGLE
NO 4
PROJECTION
SIZE
DATE
DRAWN
avandintel
CHECKED
11/20/2013
DATE
avandintel 11/20/2013
1
2
3
4
5
6
7
161 Gatehouse Rd., Sanford, Maine 04073 USA
“Creating Immaculate Atmospheres”
TITLE
±1/32
125
THE BAKER COMPANY
REV
DWG NO
D
BGA-CS500
SCALE
SQUARE FOOTAGE
SHEET
-
8
C
Download